Search Results

Search found 15209 results on 609 pages for 'configuration'.

Page 391/609 | < Previous Page | 387 388 389 390 391 392 393 394 395 396 397 398  | Next Page >

• NetworkManager detects no networks with a RTL8188CE

  - by Cormac O'Brien

  I'm on a 2011 Lenovo Thinkpad T420i with a Realtek RTL8188CE WiFi adapter. Here's the scenario: I pop in the Ubuntu LiveCD to install. Laptop detects all networks in range, I connect to my home network, internet working great. Once Ubuntu finishes installing, the home network I am connected to is the only one which appears in the applet list. Upon restarting or waking from suspend, NetworkManager does not detect any networks – it simply displays "Disconnected" under the Wireless Network section of the menu. I am able to connect to my home network by using the "Connect to Hidden Wireless Network" option and it works immediately. I have yet to test if this works with other SSIDs. I have tried reinstalling the entire OS as well as NetworkManager and my wireless drivers. For hardware info, I ran: cormac@cormac-T420:~$ sudo lshw -c network Here is the output for my wireless card: *-network description: Wireless interface product: RTL8188CE 802.11b/g/n WiFi Adapter vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: d0:df:9a:08:73:50 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rtl8192ce driverversion=3.2.0-26-generic firmware=N/A ip=192.168.1.138 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 ioport:5000(size=256) memory:f2500000-f2503fff I can provide more information if required. This was not a problem in Natty or Oneiric. I hope this can be fixed, I don't want to have to ask for an SSID wherever I need to connect.

  Read the article

• Touchpad issues on HP Pavilion dm4 (can't right click)

  - by Habstinat

  Can anyone help me with my touchpad issues? I have a HP Pavilion dm4 and it has two areas on the bottom of the touchpad to designate right and left clicks. This mostly doesn't work on Ubuntu in the fact that it recognizes any taps on either tap zone as a left click. Instead, I have it set so if I tap anywhere on the pad it makes a left click. There should be, and there are, many ways in the mouse configuration window to simulate a right click using only a touchpad. None of these work. Changing mouse orientation doesn't do anything, "dwell click" also does nothing, and, the oddest part of this problem, whenever I try to turn "Simulated Secondary Click" off (it doesn't work anyways, but just to try to toggle it), the entire theme of my desktop changes to a gray Windows '95ey look. The only way to get rid of this is to close and reopen the mouse preferences window. My computer is fairly new and the Ubuntu installation is less than a day old. I didn't do anything that I think could cause this. The problem is that I can't right click. Help, please?s that I can't right click. Help, please? Afterword: I installed two scripts from http://sansmicrosoft.blogspot.com/2010/10/pavilion-dm4-1160-erratic-touchpad.html . They didn't do anything I couldn't already do, and they did not make it possible for me to right click. :(

  Read the article

• VPS name server

  - by rockey

  I bought a new VPS, and configured two applications test1.com and test2.com on ngix server, now I can access both the application inside VPS, Now I need to invoke the application from other machines. MY domain is registerd with Enom, So I added 'A' name pointed to IP address of the VPS, Currently my VPS is not providing any Name Server, So what steps need to be done to resolve the issue regarding Name Server so that i can externally invoke the domains like www.test.com and www.test2.com from other machines? Is any configuration is left from my side other than configuring the Name Server? because it is not working now Thanks in advance

  Read the article

• Two Network Adapters on Hyper-V Host - Best way to configure?

  - by GoNorthWest

  I have two physical network adapters installed in my Hyper-V host. I want one to be dedicated to the host, and the other to provide external network services to the VMs. Would the appropriate configuration be as such: Leave the first physical network adapter alone, assigning it the host IP, but not using it to create any Virtual Netorks For the second physical adapter, I would create an External Network, along with a Microsoft Virtual Switch, and use that to provide network services to the VMs. Each virtual NIC for the VM would be associated with that External Network. A static IP would be assigned to this adapter, and each VM would be assigned a static IP as well. The above seems reasonable to me, but I'm not sure if it's correct. Does anyone have any thoughts? Thanks! Mark

  Read the article

• Per-user vhost logging

  - by kojiro

  I have a working per-user virtual host configuration with Apache, but I would like each user to have access to the logs for his virtual hosts. Obviously the ErrorLog and CustomLog directives don't accept the wildcard syntax that VirtualDocumentRoot does, but is there a way to achieve logs in each user's directory? <VirtualHost *:80> ServerName *.example.com ServerAdmin [email protected] VirtualDocumentRoot /home/%2/projects/%1 <Directory /home/*/projects/> Options FollowSymlinks Indexes IndexOptions FancyIndexing FoldersFirst AllowOverride All Order Allow,Deny Allow From All Satisfy Any </Directory> Alias /favicon.ico /var/www/default/favicon.ico Alias /robots.txt /var/www/default/robots.txt LogLevel warn # ErrorLog /home/%2/logs/%1.error.log # CustomLog /home/%2/logs/%1.access.log combined </VirtualHost>

  Read the article

• Internal SATA hard disk shows up as removable device on Windows 7

  - by neutron80k

  I am running Windows 7 on an Acer Aspire M7720 with three internal SATA drives; drive #2 and #3 are on a removable HDD rack. Drive #3 (on the second removable HDD rack) shows up as removable device in the system tray. If I take drive #3 and put it in the first rack, it shows up as an internal drive. If I put any other drive in the second removable rack, that drive is also shown as removable device. I would like to fix that so that the drive in the second removable rack also is listed as internal drive. Since this seems to be independent of the actual drive in the rack, I checked the BIOS, but that third SATA port uses the same configuration as the second rack. So far, I could not find a solution for this problem (it's really more an annoyance than a problem), any ideas are welcome.

  Read the article

• Apache .shared folder

  - by Kevin

  There are already a bunch of rules in my Apache configuration. What I want to add is the following. There are some shared folders (.shared): /var/www/.shared/ and /var/www/.include/.shared/ and /var/www/.include/(.*)/.shared/. Now when someone visits http://domain.com/test.png it first executes the existing apache rules and will (when the file/folder was not found) look in those .shared folders. So suppose I've got this filesystem: /var/www/.shared/dog.png /var/www/.shared/test.gif and /var/www/domain.com/dog.png. Now when someone visits http://domain.com/test.gif, it must load the test.gif from the .shared folder. Now when someone visits http://domain.com/dog.png it must load the dog.png from the domain.com folder (because the existing apache rules will be executed first).

  Read the article

• games and movies become too slow after some time

  - by ishaq

  On my gaming desktop, I was fixing my desktop's power supply when something seemed to burn (I got that stinging burning smell). However when I turned ON the computer (it was OFF before), everything seemed to be fine. However, I have noticed that now it becomes too slow if I play a game or movie on it. I am talking about the computer becoming painfully slow after about 5 minutes into the movie/game (it works fine otherwise e.g. browsing), it becomes so slow I can see individual frames from movies/games. What could be the problem? A fried video card? friend memory (RAM), something else? My system's configuration is: Intel Core i7 CPU 3.40GHz 8GB DDR3 RAM 2TB WDC HDD NVIDIA GeForece GT 220 (1GB) Thermal Take Commander MS1 Chassis ( http://www.thermaltakeusa.com/Product.aspx?S=1394&ID=2051 ) mainboard: Intel DH67CL AAG10212-208 Realtek High Definition Audio

  Read the article

• xen 4.0 squeeze fails to start guests with: launch_vm: SETVCPUCONTEXT failed

  - by mcr

  As Chris Benninger says over at: http://www.benninger.ca/?p=58 lots and lots of people have the problem with Squeeze and xen4.0 telling them: launch_vm: SETVCPUCONTEXT failed (rc=-1) but nobody seems to know what the solution is. I don't know either, but at least here, a solution might get recorded. In my case, I can start one guest machine. An identical configuration for a second machine fails. Whichever one I start first, is the one that runs, the other gets the error. I've got at least a dozen other systems (at my work) running great with Squeeze and 64-bit XEN, but not this new machine at home.

  Read the article

• Request exceeded the limit of 10

  - by Webnet

  My logs are FULL of [Tue Jan 11 10:20:45 2011] [error] [client 99.162.115.123] Request exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace., referer: https://www.domain.com/vehicles/Chevrolet/Uplander/2006 The problem is when I enable LogLevel debug we get HUGE error logs because all of our traffic is SSL. From what I can tell the file doesn't record these errors anymore, either that or it's so buried in SSL logs that I just can't find them. Here's my .htaccess Options -indexes RewriteEngine On RewriteRule ^battery/([^/]+)$ /browser/product?sku=BATTERY+$1&type=battery RewriteRule ^vehicles/([^/]+)/([^/]+)/([^/]+)/product([0-9]+)$ /browser/index.php?make=$1&model=$2&id=$3&%{QUERY_STRING} [L,NC] RewriteRule ^vehicles/([^/]+)/([^/]+)/([^/]+)/([0-9]+)$ /browser/product.php?make=$1&model=$2&year=$3&id=$4&%{QUERY_STRING} [L,NC] RewriteRule ^vehicles/([^/]+)/([^/]+)/([^/]+)$ /store/product/list.php?make=$1&model=$2&year=$3&%{QUERY_STRING} [L,NC] RewriteRule ^vehicles/([^/]+)/([^/]+)$ /vehicle/make/model/year/list.php?make=$1&model=$2&%{QUERY_STRING} [L,NC] RewriteRule ^vehicles/([^/]+)$ /vehicle/make/model/list.php?make=$1&%{QUERY_STRING} [L,NC]

  Read the article

• HDDs randomly falling off raid

  - by michael

  I really need help on this it's Saturday long weekend.No customer service help:( .I recently build new server/light duty desktop.Main purpose is only file sharing.Raid configuration :Adaptec 6805 ,8x 3TB HDD WD Red,Intel RES2SV240 expander,Raid 6,set in Intel mobo DZ 77GA-70K.I upgraded firmwares, but I'm having strange problem. During Build Verify segment 7 got missing.I just reinsert drive into hot swap bay and it started to rebuild Array.After rebuild was done another segments 0 and 5 gone missing while build/verify.I reinserted drives and now I'm praying that raid is going to rebuild successfully from remaining 6 drives,because i already transfer some data on it(I know it was bad idea).I checked S.M.A.R.T on missing drives , it only says link failure and aborted commands on one of them.No Errors on HDDs.Connections and cables are good.I added 2 fans blowing on RAID controller because it was getting too hot, so I guess overheating shouldn't be issue.What can be possibly wrong? Thank you for help.

  Read the article

• How many xml http requests is too much for a pc to handle?

  - by Uri

  I'm running mediawiki on an apache on a regular pc running vista (don't know the specific specs, but I'm guessing at least duo core 2 2 giga hertz processor, broadband connection (500 kb/s at least, probably 1 mega). I want to use the MediaWiki api to send a lot of requests to this server. Most of the time the requests will be sent through LAN (but sometimes through the internet). I'm talking thousands of requests every few seconds at worst case. (A lot of these requests may repeat themselves, I guess some sort of cache would help) Will the server handle this, or do I need a stronger/dedicated computer? (I'm not looking for specific yes/no, but just want to get an idea as to what configuration of computer will support how many request per second) Thanks

  Read the article

• Page loading hangs and never times out (Apache)

  - by Lucas -luky- N.

  I have set up Apache2 on a guest Ubuntu 10.04 OS (virtualbox). I have created a "big" HTML file (4MB) with only plain text and when I access a page through my local IP address such as http://192.168.0.100 it successfully loads the entire page. However, when I try to access it through my public IP address the browser loads part of the page and then hangs forever on "loading". I can load a simple webpage though. I'm not sure whether it's an issue with my Apache configuration, Virtualbox, Router or Modem. Any clues? Tried enabling Debug and mod_status but didn't find any useful information.

  Read the article

• Can't connect Tomcat via JMX

  - by Icarokun

  I couldn't connect to one Tomcat server via JMX in a Linux virtual machine. There was no firewall running. All seemed ok. By searching on the web I found out that I have to use the -Djava.rmi.server.hostname property to fix it. It worked, but I don't understand why. My machine has five Tomcat servers running, all of them have JMX enabled in consecutive ports (8008, 8018, 8028...), all of them have the same configuration and only one of them had this issue connecting JMX. No firewall, no -Djava.rmi.server.hostname property in any Tomcat. I understand the problem, but I don't understand why four of my Tomcat servers worked and one of them not. Why is this?

  Read the article

• Netbook won't boot after using EasyBCD

  - by TNC

  I have an Asus T91MT netbook on which I used to have Windows 7 Home Premium and Ubuntu 10.10 installed (dual boot). After trying to upgrade to Ubuntu 11.04, Ubuntu is no longer able to boot, so I tried to uninstall Ubuntu completely and then reinstall it. Following these directions, I tried using EasyBCD to bypass the GRUB2 bootloader so that after uninstalling, it would automatically boot into Windows 7. However, after doing the "install BCD" step and restarting, I got the following message: Windows failed to start... File: \Boot\BCD; Status: 0xc0000098; Info: The Windows Boot Configuration Data file does not contain a valid OS entry. I'm currently trying to create a USB stick of the Windows Installation disc but in the mean time, I can only boot from a Ubuntu USB stick. Is there anything I can do from within Ubuntu to fix this? Or does anyone have any other suggestions/solutions?

  Read the article

• Problem accessing MICROSOFT##SSEE database (Error: 18456, Severity: 14, State: 16.)

  - by Philipp Schmid

  After an unexpected server shutdown due to a power failure, I can no longer connect to the internal windows database MICROSOFT##SSEE which is hosting Central Admin for my SBS 2008 server. The log shows: Error: 18456, Severity: 14, State: 16. Login failed for user 'NT AUTHORITY\NETWORK SERVICE'. [CLIENT: <named pipe>] I've tried to connect using the SQL Management studio (connecting to .pipemssql$microsoft##sseesqlquery) but no luck. The SQL Server Configuration Manager doesn't show a entry for 'Protocols for MICROSOFT##SSEE' (but shows it for 2 other database hosted on the same SQL server 2005 Express edition. I have tried to restore the master.ldf and mastlog.log files from a backup, but the issue persists.

  Read the article

• Debian/Linux backup files changed by user

  - by verhogen

  I would like to backup my server that is hosting a few websites in such a way that I can restore everything to the way it was from a fresh format. I know that I should backup all the home folders and then probably my /etc/ folders. Is there a way to figure out all the folders that are relevant for backup in that they were not automatically generated or installed from apt-get? It would ideally restore all the users with their current passwords as well. Basically, enough to clone the system but only copying configuration files.

  Read the article

• Is there a "pattern" or a group that defines *rc files in *nix environments?

  - by Somebody still uses you MS-DOS

  I'm starting to use command line a little more, and I see there are a lot of ways to configure some config files in my $HOME. This is good, since you can customize it the way you really like. Unfortunately, for begginners, having too many options is a little confusing. For example, I created .bash_alias for some alias I'm using. I didn't even know this option existed, I'm used to simply edit .bashrc. Do exist a pattern, a "good practice", envisioning flexibility and modularity in terms of rc files structure? Do exist a standardization group for this, or every body just creates it's own configuration setup?

  Read the article

• How to connect to VPN using commands in Linux (Fedora 16)

  - by WarFox

  Usually, I use the network connections icon on the top bar to connect to VPN. The connection is configured properly and it connects well. Configuration screen shot is given below. As you can see I have selected the 'Connect automatically' option. But this option doesn't help in connecting to VPN automatically upon login. This is my university VPN and it uses 'Point-to-Point encryption (MPPE)' for authentication I need to connect to the VPN using command line, so that I can write a script and run it at start up, so the connection is automatically established every time I login. This will also help in connecting to VPN when I login from 'init 3' mode. I depend on this VPN connection for my internet access. Please help me with the required commands.

  Read the article

• Windows Load Balancing Services and File Shares

  - by cbkadel

  We are using Windows Load Balancing Services (WLBS). One of the things that I do notice, is that if I create a File Share on one of the physical hosts, I am able browse to that file share using the clustered-ip address. This might be a 'opinion' question, but I haven't been able to find much literature on file shares in particular with wlbs. Is this a recommendation configuration? Are there any limitations? What about when the share contains different sets of content on both hosts? For instance: Three 'hostnames' - host1 (physical1), host2 (physical2), and cluster. I create the following shares: \physical1\myshare \physical2\myshare What I notice is that i can see: \cluster\myshare I'm guessing that this is read-only, and that there's no file synchronization. But what happens if they are in fact out of sync, what would a network browser see then? Thanks for your time!

  Read the article

• PDF download hanging from server with Firefox/Chrome

  - by Cruachan

  I have a Windows 2008 R2 (virtual) server running a number of websites. My client has uploaded several PDFs by FTP to a download directory from where they can be retrieved via a web page. This works fine in IE and Safari, but when attempting to download with Firefox or Chrome both browsers hang and Firefox posts 'stopped' in the status bar at the bottom of the page. We've tried this on several PCs at different locations so I think this is a server problem. Why would this be? Is there some configuration setting I need to change?

  Read the article

• Computer loads BIOS, but won't load OS

  - by LEGEND383

  I have just purchased a brand new motherboard bundle, installed into the old case with the old PSU and the old HDD. I can get into the BIOS, but whenever I try to boot from the HDD, it just sits with the fans going, but nothing is displayed. The moniter works (tested with another machine), and I'd hope there are no problems with the motherboard, CPU or RAM because as I said I only brought them today. The only things I can think of are: The PSU's motherboard connector is a 20-pin, and the motherboard has a 24-pin connector (not a problem with the previous board) The OS is not supported (doesn't seem likly to me, but possible I guess) Here is my system configuration: Motherboard: ASUS F1A55-M le CPU: AMD APU A6 3500 HDD: 1Tb SATA RAM: 4Gb DDR3 OS: Ubuntu Satanic v666.9 PSU: Winpower ATX-400 (this thing is REALLY old) If anyone is able to offer a reason as to why this is not working, or a possible solution, it would be greatly appriciated.

  Read the article

• Multiple public/private key pairs for the same user

  - by bruceb

  First, sorry if this question has already been asked/answered - I've searched but perhaps I haven't recognised the answer.... What we have is a cluster of servers which need to access a single remote server using sftp. We are migrating from one remote server to another at the same (remote) location. We also want to refresh the public/private key pairs on the configuration as part of an ongoing security review. My question is - can we have multiple public/private key pairs for the same user between server A and server B? I want to do this to allow for cutover testing - but am concerned that the software checking keys may only try one of each type (rsa/dsa?) before rejecting the connection method and moving to the next type of key. Hope it's a straightforward question - please let me know if I need to supply more details. Thanks in advance Bruce

  Read the article

• Setting primary IP for VPS (out of 2 available)

  - by Flyer

  I've got a little problem. My VPS (Debian box) has 1 primary IP address, but now my hosting provider decided to assign me another one due to problems with first one. Let's say new IP is 91.222.152.20 and old one 91.221.190.170. How should I make 91.222.152.20 primary one, so that everything works on this address instead of 91.221.190.170 (like ftp, mysql etc) I tried editing /etc/newtwork/interfaces setting iface eth1 inet static address 91.222.152.20 netmask 255.255.252.0 network 91.222.152.0 broadcast 91.222.155.255 gateway 91.222.152.1 I know that network is 91.222.152.0/22 so I assume that above configuration should be right. Saved, rebooted and that ended pretty bad. Couldn't even ping box on old or new IP. Had to revert to working one. So question is. What am I doing wrong and how to do it right?

  Read the article

• How often does a Linux check it's /etc/localtime file

  - by DarkSheep

  I am trying to troubleshoot a problem. Some very helpful information would lead me to a solution is: Often does Linux check the /etc/localtime file? Additionally if there is a configuration file to increase the frequency (for testing) that would be helpful. Normally I would assume that it would check when a call to the ntp server has been executed, but NTP is not installed. It couldn't possibly check every time the date function is called as this would result in many problems on busy web servers. Server is Ubuntu 12.04, but I don't think that is relevant to the question.

  Read the article

< Previous Page | 387 388 389 390 391 392 393 394 395 396 397 398  | Next Page >