Search Results

Search found 14828 results on 594 pages for 'settings py'.

Page 388/594 | < Previous Page | 384 385 386 387 388 389 390 391 392 393 394 395  | Next Page >

• Allow Internet Access with Default Gateway on Windows 7 VPN Server

  - by Hakoda

  I have a Windows 7 box at home (which I'll refer to as Home-VPN) that runs a simple PPTP VPN server. I have a range of 2 IP address (192.168.1.10-192.168.1.11) to give out, although the server is only able to give out one concurrent connection. Ports 1723 & 47 are correctly forwarded to the server. IPv6 is disabled on both Home-VPN and the client. I setup Home-VPN just like this Youtube video: http://www.youtube.com/watch?v=1s5JxMG06L4 I can connect to it just fine but I can't access the Internet when connected to Home-VPN, all outside web servers (eg. google.com, mozilla.org, apple.com) are unreachable. I know I can uncheck "Use Default Gateway on Remote Servers" on the client side under IPv4 settings but that will route all my traffic through my current connection, rather than through the VPN, defeating the purpose of said VPN. Any ideas on how I can fix this?

  Read the article

• Keeping the wireless connected.

  - by casr

  I’m running OpenBSD on a computer which is connected via wireless to the network. It is a well supported NIC and I’ve had no problems with it from a hardware perspective. Unfortunately my wireless access point occasionally loves to forget it’s settings. I then have to help it remember. However, in this intervening time my OpenBSD box drops the connection and then does not automatically reconnect. I have alleviated my problems by running this simple script in the background: #!/bin/sh while [ 1 ] do ping -c1 192.168.1.254 > /dev/null if [ $? = 1 ] then sh /etc/netstart ral0 > /dev/null fi sleep 30 done [Ping the access point. If there is no response attempt to reconnect.] It seems to me to be a very suboptimal solution. Has anyone else come across a better way?

  Read the article

• When to run SYSPREP

  - by haxel

  I am attempting to set up a computer using an answer file created by the WAIK and resetting the settings with SYSPREP and had a quick question. We are wanting to use Norton GHOST for our deployments. When do I run the sysprep? I figure it is after I get the computer all set up with the proper updates/software/drivers but I have not been able to find a direct answer to this online. Do i run it after everything is set up and the system is ready to be captured?

  Read the article

• Why do I see different TCP behaviour between IIS and FTP server applications on Windows 2003?

  - by rupello

  I am comparing Wireshark traces of a 10MB file download file from: the FileZilla FTP server and IIS (using HTTP) on the same Windows 2003 server. The FTP download performs faster and the trace shows the server behaving as expected, sending more data to the client with every ACK received: Link to full-size image The HTTP server trace shows a more bursty pattern. The timing of the send bursts are sometimes unrelated to any ACKs received from the client (circled in red): Link to full-size image Anyone have a suggestion as to why IIS traffic is having like this? Update: We have tried modifying the http.sys registry settings (setting MaxBytesPerSend to 256k and MaxBufferedSendBytes to 64k as recommended). Changing MaxBytesPerSend does seem to improve performance by increasing the amount of in-flight data , but we still see the same bursty pattern.

  Read the article

• Is there any way to automatically prevent running out of memory?

  - by NoahY

  I am often running out of memory on my VPS ubuntu server. I wish there was a way to simply restart apache2 when it starts running out of memory, as that seems to solve the problem. Or am I just too lazy to fix the problem? I do have limited memory on the server... Okay, more information: I'm running apache2 prefork, here are my memory settings (i've been tweaking them...): StartServers 3 MinSpareServers 1 MaxSpareServers 5 MaxClients 150 MaxRequestsPerChild 1000 The VPS has 1 GB of ram, running ubuntu 11.04 32-bit. As for scripts, I have a wordpress network with 5 blogs, an install of AskBot (a python/django stackexchange clone), and an install of MediaWiki that isn't really used. There is also a homebrewed mp3 script that accesses the getid3 library to display information on lists of podcasts, and it seems to be throwing some php errors, not sure if that's the culprit...

  Read the article

• mysql is not using multiple cpus

  - by helpmhost

  Hi, Our MySQL server has been using a lot of CPU lately (it's reached 100% several times and stays there for a while) and I noticed that it the CPU load is all on one core of one cpu. I was hoping to spread that out to all 4 on my server. I have been tweaking the MySQL settings to use more ram and less cpu, but it still occasionally reaches very high CPU usage. It seems like everything about the topic refers to thread_concurrency (which I've read is a solaris only setting). What can I do in Linux? Thanks.

  Read the article

• PC reboots instead of shutting down, no software problem. What could be the cause?

  - by DaVinci

  Hi, first of all: I'm not sure if superuser is the right site for my question and google didn't help. I have a pc here that prefers rebooting to shuting down. Everytime I try to shut the pc down it reboots, however it is possible to turn the pc off by pressing the power button. The problem is not windows-specific, the Ubuntu LiveCD does exactly the same that's why I said that it is no software problem. I checked wake on LAN, it is disabled and I also resetted the BIOS settings to factory default. That might not mean that it can't be a BIOS problem but I don't know what else to try here. I did not check any hardware yet but nothing exploded so far. I don't know what could have caused this behaviour as it is not my PC. The Mainboard is a ASUS P5Q-E P45.

  Read the article

• Cisco WLAN Controller not pushing out DHCP addresses, what else could it be?

  - by Name

  On our Cisco WLAN Controller web interfaces, in Controller Interfaces, I have made a new interface with these settings: VLAN Identifier 202 IP Address 172.16.202.1 Netmask 255.255.255.0 Gateway 172.16.202.254 Primary DHCP Server 172.16.100.3 Secondary DHCP Server 172.16.100.2 Port: LAG I've also made a new WLAN and assigned it to the above interface. I have saved changes. But our wireless devices, although they seem to authenticate with the WLAN fine, they always get stuck on "obtaining DHCP address", so it seems the WLAN Controller isn't pushing out DHCP addresses to our devices. We do have a DHCP scope for the above in Windows Server 2008 R2 and everything there seems fine. If I connect a device with a static address (e.g. 172.16.202.10), it will connect. Stuck on what to do :(

  Read the article

• How do I force Windows to play sound through the speakers only when a USB headset isn't connected?

  - by Phoexo

  I'm using a speaker set connected through the green audio jack and a headset which I connect through USB. My problem is that every time I connect/disconnect my headset, I have to go through a lot of settings/restart some programs to make the sound go through the speakers again. What I want is to have audio play through the headset when it's connected, but if I disconnect the headset, I want the audio to automatically play through the speakers. For example, if I connect/disconnect the headset while listening to music, I have to restart the application to make the music play through the correct speaker/headset, and it shouldn't be that inconvenient. (I found this somewhat relevant topic, but the problem is that it doesn't really give an answer. (Also, it is 2 years old.))

  Read the article

• PHP errors not being displayed

  - by Mike

  I'm using PHP with Apache on Ubuntu 12.10. Errors are not being displayed to the browser for some reason and I can't figure it out. I have the following in my php.ini file: error_reporting = E_ALL & ~E_DEPRECATED display_errors = On display_startup_errors = On log_errors = On I am also positive that I have edited the correct ini file by verifying it with php_ini_loaded_file(). I can also verify that the values are correctly set by doing the following in my script: echo ini_get("display_errors"); // Outputs 1 echo ini_get("display_startup_errors"); // Outputs 1 echo ini_get("log_errors"); // Outputs 1 echo ini_get("error_reporting"); // Outputs -1 I have tried what seems like every possible combination of these settings (and restarting Apache after each change) and it is just not outputting errors. I am also not using ini_set anywhere in the script. It is being set only from the ini file. Any ideas why errors aren't being displayed?

  Read the article

• Bing New Tab Page on Chrome

  - by One Terrorist

  For a long while, my computer had the default new tab page, which I liked. Recently, it has turned into a bing search bar tab. I hate bing. I checked all my settings, removed unused extensions, checked my Chrome files briefly, but I can't find how it keeps coming back! At first I thought it was easy to find; it was set as the new tab page, but it isn't now and it's still here! I installed a new extension after a few tries trying to remove it, called "X New Page Tab", and it worked for one night, then Bing overrode it. Any help please? I really don't want Bing as anything on my computer.

  Read the article

• Aligning Numbered Bullet Points in Word 2007

  - by Frustratedwithbullets

  Hello, I am putting together a very large business manual which incorportaes numbered heading, steps to follow, diagrams, etc. When using the bullet points, they align perfectly as I work through the processes. However when I include a diagram, or something different from the "norm" of text, the alignment changes. I would like all the bullets points to be aligned in the whole document regardless of where they appear in the document. Is there a way to save the settings so that the bullets always appear in the same position? Currently I am having to reset the indents by dragging the tabs on the ruler. This will be a large document, so I don't want to manually adjust the numbered bullets every time. Help would be greatly appreciated. Thanks very much.

  Read the article

• IPv6 feature in Network Adaptor is Slowing Internet

  - by Teknophilia

  The past few days, my internet browsing has become very poor. It's not a matter of speed, as a speed test will give at least 15Mbps. It seems as if my laptop has a hard time actually connecting to the sites. I've found a possible culprit, but don't know why it would affect anything: Going to adapter settings and disabling ipv6, but leaving ipv4, my browsing is back to normal. Re-enabling ipv6 brings back the issue. This is strange though, because I have always had ipv6 enabled. Moreover, using sites to test ipv6 compatibility, I fail with ipv6 enabled on my adapter, and pass when it's disabled. Ideas about why this is happening, and how to fix it?

  Read the article

• Inbox should not contain any calendar appointment

  - by cotablise

  Imagine two users A and B.User B has editor rights on mailbox A via delegation. Delegation settings: User A should not receive any invitation (calendar appointments). All should be routed to user B. It works fine when you are connected to mailbox via Outlook. Problem is that sometimes it does not work when user is connected via his iPhone (he receives calendar appointments in inbox). I know that this feature for MS products and therefore it works on MS Outlook. But user A told me that it worked in the past also on iPhone with user C. Problem is that nowadays it does not work perfectly for user B. Do you have any suggestion please? Thank you in advance.

  Read the article

• How can I have two web roots on one server, so I can point two domains to two different roots?

  - by Daniel F. Dietzel

  I usually ask my n00b questions on Stack Exchange, but now I'm setting up a VPS and have a question. My usual site.com points to my VPS's IP xxx.xxx.xxx.xxx. Now I have a different domain, and I'd like to point that to another location, say xxx.xxx.xxx.xxx/myname. However, when I try to add that as an "A" record in the DNS settings it won't let me. FYI I'm using chicagovps.net with ubuntu 11.10 and Nginx. Thanks!

  Read the article

• How can I continue audio playback even after switching user?

  - by klyonrad

  I just tested it with iTunes; after switching the user account (only after logging into another account, to be precise) the audio playback from the account "A" stops. However iTunes continues playing in the background; which I realized after switching back to account "A". Very frustrating because it kind-of is a deal-breaker for me; the other person should be able to have some personalized settings; while it is still my computer, and the main account has all the music obviously. The ideal solution would be audio output continuing running while user still has the ability to manually pause it... EDIT: I tested a bit more: "Desktop" apps like VLC don't output sound but continue running; the stock Music.app in Metro pauses the music and continues playing when switching back.

  Read the article

• Is there a way to get a shared spreadsheet to update without closing and reopening?

  - by Mike

  Using Excel 2010, I have a spreadsheet that is used by 3 different people at any one time. But if one person has the spreadsheet open on there PC the other people can only view it as read only. I have since shared the workbook and put the spreadsheet on a shared network drive and now they can all view the spreadsheet at the same time and edit it at the same time. The problem is that nobody can see the changes that the other users have made unless the close out of the spreadsheet and open it up again to view the changes. I have checked the settings of the shared workbook and on the advanced tab have tick the option that updates the information every 5 minutes but the information does not update until you close out and open the spreadsheet back up again. How can I fix this problem?

  Read the article

• Outlook '10 hangs often, IMAP sync

  - by user23150

  We have 3 employees using IMAP to sync with their Desktop and Android Phones. Two are using 70% of their accounts storage, another is using 80%. They all have similar counts on folder structure, etc. The employee with the 80% storage is constantly having Outlook freeze on them for up to 5 minutes at a time. I realize this is Outlook connecting and doing activity on the server, but no one else has this problem. In fact, one user with the 70% storage used uses a very slow laptop, and doesn't have freezing issues. The network is the same, the settings are the same - at a loss how to proceed? Obviously "Outlook is a crummy IMAP client" doesn't help management...

  Read the article

• When XP is asleep for a long time LAN reports code 43, gives up the ghost.

  - by seeanimal

  This one's got me stumped. Whenever the system is asleep for a long time, e.g overnight, the LAN driver reports error code 43 ("a problem") and turns itself off. This has being going on for months, but I never caught the problem until now. The owner merely shuttles back to a restore point I set her when the machine worked. Previously (without knowing exactly what was happening) I have tried everything to resolve this. Manually resetting the TCP/IP, fiddling with the driver Wake From LAN settings, DIFFERENT drivers, etc. etc. The solution is easy, uninstalling and reinstalling the driver. Understandably, though, the user is uncomfortable with this operation and the problem persists. What's causing it and how to stop it recurring? Any ideas? Thanks in advance to this great community. XP home SP3, Marvell Yukon 88E8056 PCI-E Gigabit Ethrnet Controller, version 10.22.7.3 (yk51x86.sys)

  Read the article

• Very Dark Windows 7 Screen

  - by user147521

  My Gateway laptop -Windows 7- screen became too dark a few days ago after I finished installing Windows automatic update. I can see nothing unless I use a flashlight. Windows login screen is the only bright screen for few seconds. What should I do to resolve this issue? I checked power-saving/ Power Options settings and rebooting in Safe Mode. I tried to lower the refresh rate but it did not allow me. The laptop adapter type is ATI Radeon Xpress series. I calibrated display color. I uninstalled and reinstalled the adapter. I tried to update the driver but the driver is up to-date. Any help would be appreciated.

  Read the article

• PHP CPU utilization limit

  - by knightrider

  I have done some research on the net regarding the problem. My questions is NOT how to reduce cpu utilization by improving algorithm or improving the performance by using multitasking or limiting CPU per system user. I have a website where user logs in does some processing and logout. The site uses linux server, php and apache. The problem is that I cant control the amount of CPU allocated to each user. ie I want give a guarantee that a user will get say atleast 5% of CPU (assume total number of users is less than 20). How can I do this? Any solution (A php code, apache server settings, or any out of box soln) is welcomed. Thankyou very much for reading this :)

  Read the article

• Netbook screen too small, Software fix?

  - by LantisGaius

  I have a netbook with a maximum screen resolution of 1024x600. I'm running a dualboot Ubuntu10.10 & Backtrack4r2, and I'm having some trouble with windows whose "height" was larger than 600px. Buttons end up below the screen, and I can't click 'Ok' or 'Cancel' or 'Apply'. When my OS was still Windows7, I didn't have any problems because I can resize all of the windows that I use. Most of windows in linux (esp. in KDE settings), the windows has a fixed height. Is there any workarounds to my problem?

  Read the article

• How to prevent boot manager missing after cloning a win764 image using Ghost 2003?

  - by hirogen

  I am running ghost 2003 command -fdsp, but once we have cloned the image and restored it onto exactly the same make and model machine, we are force to run win7 setup and run a repair which fixes the boot menu, I want to prevent this requirement to fix the problem, any suggestions besides the obvious of using Windows AIK tools, new versions of ghost/clonzilla. I want to prevent the problem in the first place, it's 1 partition only, on a levano workstation m82 with UEFI and a 100mb system reserved partition. Windows Boot Manager screen and states: Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: 1.Insert your Windows installation disc and restart your computer. 2.Choose your language settings, and then click "Next." 3.Click "Repair you computer." If you do not have this disc, contact your system administrator or computer manufacturer for assistance. Status: 0xc000000e

  Read the article

• TYPO3 unable to log in

  - by Agata

  Hi, My company prepared a new website based on typo3 (don't know the version but they started to prepare it in October 2011 so it's probably from that time. A couple of days ago I got my user name and password but I'm unable to log in (Itried withIE, Firefox and Chrome). Each time I try typo3 behaves like I'd be entering wrong user name orpassword (for sure I'm entering the right one, I also tried other user's data it ended up the same way). I use Windows 7 and Kaspersky Internet Security 9.0.0.736 - might their settings block typo3? I really don't know what to do and can't obtain help from the IT department (in head office in another country)... Thank you for any suggestions in advance.

  Read the article

• how do I install an add on from zip in xbmc 12?

  - by jcollum

  http://wiki.xbmc.org/index.php?title=Add-ons#How_to_install_from_zip The wiki is pretty straighforward but those options are not present when I follow the steps in the wiki. I select this: System -- Settings -- AddOns All I see is a list of add ons like Youtube and Railscasts. There's no option for installing from a zip file like the wiki says. Pressing ".." just takes me to the list of AddOn types like "Album Information" and "Artist Information" etc. The wiki looks to be out of date.

  Read the article

< Previous Page | 384 385 386 387 388 389 390 391 392 393 394 395  | Next Page >