Search Results

Search found 1051 results on 43 pages for 'nic foster'.

Page 39/43 | < Previous Page | 35 36 37 38 39 40 41 42 43  | Next Page >

• Mixing both local and nonlocal addresses on three switches

  - by klew

  I have four computers that have nonlocal addresses like 150.X.X.X. Now I also get another few computers that should be only accessible through a gateway (it will be computing cluster) and they addresses are 10.0.0.X. I also wanted to include those four older computers to this new cluster, but I want them to be accessible from internet on nonlocal addresses (so I would like to set up them on both 150.X.X.X and 10.0.0.X addresses - I've set up it as interface eth0:0 since I have only one NIC). Those new computers have their switch and old computers also have their own switch. Both of them are connected to another (third) switch. The problem is that those old computers see each other (I can ping them), and also new computers see each other, but I can't ping old computer from new computer and vice versa. However pinging on nonlocal adresses works as expected. I looked into switch configuration and didn't find anything useful. I have no idea what I missed here. Can somebody help? All computers have Ubuntu Server 10.04

  Read the article

• Exchange on SBS2003 not receiving mail, but sending via telnet works

  - by YDdraigLas

  Last week we had a problem on our SBS2003 server where our external connection dropped out and I was only able to restore it by running netsh winsock reset catalog and netsh int ip reset. Thinking all was well, I went home for the weekend and came in today to find that we haven't received any external emails since before the original problems occurred. There are plenty of examples of this on the internet, usually to do with a firewall issue, but the odd thing here is that when I connect using telnet I can send an email and it goes straight through and into my inbox. When I send an email from Gmail or Hotmail nothing comes through at all. Internal emails are also unaffected, as are outgoing emails. There have also been a couple of emails that have come through for other users, both out-of-office replies, if that's relevant. I've run the CEICW several times, checked all the NIC settings, but no joy. Before I give up trying to fix this and reinstall the whole server, has anyone come across this problem before? I have only found fleeting references to this in previous searches and no real answers. Any advice gratefully received.

  Read the article

• IPTABLES syntax help to forward Remote Desktop requests to a VM [CentOS host]

  - by NVRAM

  I've a VM running MSWindows XP hosted on my CentOS 5.4 machine. I can rdesktop into it from the hosting machine and work just fine using the private ddress (192.168.122.65), but I now need to allow Remote Desktop access from other computers (not just the machine hosting the VM). [Edit] I only need to allow access for a day or so, so don't want to add a NIC (for XP activation reasons). Could someone help me with the iptables syntax? The VM is on a private/virtual network: 192.168.122.65 and my CentOS machine is on a physical network, at 10.1.3.38 (and 192.168.122.1 as the GW for the virtual net). I found this question, but none of the answers seemed to work and I'm a bit timid at blindly trying variations. My FORWARD rules are as listed. Thanks in advance. # iptables -L FORWARD Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere 192.168.122.0/24 state RELATED,ESTABLISHED ACCEPT all -- 192.168.122.0/24 anywhere ACCEPT all -- anywhere anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable REJECT all -- anywhere anywhere reject-with icmp-port-unreachable RH-Firewall-1-INPUT all -- anywhere anywhere [Edit] If I do play "blindly" is there a simple way to reset the settings on CentOS (a la service network restart)?

  Read the article

• Trying to diagnose network problem: ping 127.0.0.1 (or any address) results in error code 1

  - by Mnebuerquo

  NIC seems to be working, as windows detects the hardware and has a driver and reports success. DHCP seems to have gotten an ip address, 192.168.1.101. I released and renewed it and it seemed to work normally. I tried ping 127.0.0.1 as first step of testing network configuration. Pinging 127.0.0.1 with 32 bytes of data: PING: transmit failed, error code 1. I read somewhere that net helpmsg [error code] would give a human readable name for the error code. net helpmsg 1 says "Incorrect function" I've tried disabling the firewall and antivirus in McAfee SecurityCenter and I still get the same error. Could the firewall/antivirus be breaking it even if disabled? Broadcom Advanced Control Suite 2 is installed, and its network test passes all tests, including ping 192.168.1.1 which is the default gateway. If I try ping 192.168.1.1 from the command prompt I get the error code 1 again. So does anyone have any theories that would explain this problem? Other tests I should try? Thanks!

  Read the article

• VirtualBox bridged network not working as expected

  - by iby chenko

  I am having hard time getting Bridged network to work with VirtualBox. Idea is to have host as well as one or more guests on same LAN. Using NAT (default) I do get access to internet and any node on the LAN when working from one of the VM guests. However, no LAN node including host can access (or ping) guest in VM. I need to be able to use any guest as if it was a physical computer on the network (need to be accessed by any machine on LAN). According to my understanding of the VirtualBox documentation, this should be Bridged mode. I think I set it correctly, well, actually there is not much to it: 1. select Bridged mode in VM network setup 2. select physical NIC of the host to connect bridge to 3. start VM When I do this, each VM does get new IP address that corresponds to LAN settings : 192.168.1.100 192.168.1.102 192.168.1.103 etc. where host is 192.168.1.80 / 255.255.255.0 (IP addresses above 100 are served by DHCP server). This seem to be correct based on what I know about ethernet. From VM I can ping other nodes like 192.168.1.50 etc. and I still get ethernet access. So far so good... But I STILL cannot ping any of the other VMs (running ones of course). I cannot ping them from other VMs, from host or from other nodes on the LAN. Aside from fact that IP addresses handed to guests are now local, this still acts same as NAT. What is going on? What am I missing? Regards, I

  Read the article

• Route all traffic of home network through VPN

  - by user436118

  I have a typical semi advanced home network scenario: A cable modem - eth A wireless router (netgear n600) eth and wlan A home server (Running ubuntu 12.04 LTS, connected over wlan) A bunch of wireless clients (wlan) Lying around I have anoher cheaper wlan router, and two different USB wlan NIC's that are known to work with Linux. ACTA struck. I want to route ALL of my WAN traffic through a remote server through a VPN. For sake of completition, lets say there is a remote server running debian sqeeze where a VPN server is to be installed. The network is then to behave so that if the VPN is not operative, it is separated from the outside world. I am familiar with general system/network practices, but lack the specific detailed knowledge to accomplish this. Please suggest the right approach, packages and configurations you'd use to reach said solution. I've also envisioned the following network configuration, please improve it if you see fit: ==LAN== Client ip:10.1.1.x nm:255.0.0.0 gw:10.1.1.1 reached via WLAN Wlan router 1: ip: 10.1.1.1 nm:255.0.0.0 gw: 10.10.10.1 reached via ETH Homeserver: <<< VPN is initiated here, and the other endpoint is somewhere on the internet. eth0: ip:10.10.10.1 nm: 0.0.0.0 gw:192.168.0.1 reached via WLAN Homeserver: wlan0: ip: 192.168.0.2 nm: 255.255.255.0 gw: 192.168.0.1 reached via WLAN ==WAN== Wlan router 2: ip: 192.168.0.1 nm: 0.0.0.0 gw: set via dhcp uplink connector: cable modem Cable Modem: Remote DHCP. Has on-board DHCP server for ethernet device that connects to it, and only works this way. All this WLAN fussery is because my home server is located in a part of the house where a cable link isnt possible unfortunately.

  Read the article

• Two cisco gigabit switches refuse to link to each other. Any idea why?

  - by Prody

  I have 3 Linksys SR2024 switches which are basically non-managed 24 port Gbit + 2 miniGBIC. I now had to add another switch to the network, and my provider didn't have the SR2024 switch anymore, so I got the Cisco SLM2024 which was a bit more expensive. It's pretty much the same thing but with management (that I don't need). So I've connected the SLM2024 to a SR2024 via Cat6 cable, and for some strange reason, I get no link. If I connect any machine with a Gbit NIC to both switches, it links with 1Gbit autonegotiated. If I connect the SLM2024 to a non-Gbit switch (I have a cheap 4port ASUS switch), it will link just fine on 100Mbit full duplex. Since the SLM2024 has management, I've tried to see if something is misconfigured on it's side, but it's not, it advertises 1Gbit and lower. (hence the machines connecting succesfully at 1Gbit). Since the SR2024 that I'm trying to connect it to also connects successfully with another SR2024 and other Gbit machines, it means that it advertises Gbit too. But for some reason when I link the SR2024 to the SLM2024 I get no link. Please note that I've properly tested the wire. Does anyone have any idea what's wrong?

  Read the article

• A server which uses 2 IPs and is needed to give service (under NAT)

  - by user6004

  I have an internal server, which uses a certain service. This service listens on a port, and speaks on a different port. The problem with the service is that it can't listen and speak on the same IP address, so I have configured 2 IP addresses for that NIC, and so I "solved" the problem with the listening and speaking. I have a problem though... I need that server to be NATed, with a public IP address, and that server needs to be available from the outside (and as only one IP)... The question is, how do I solve the situation here? If I do a NAT for one IP address (the listening port), then he will be able to get requests from the outside, but won't be able to send out traffic (because the other IP won't have NAT). If I do NAT on both of the IPs, then when traffic comes in for the listening port, it won't necessarily arrive to the listening IP, but rather to the speaking one. I hope I made myself clear and that there is a sensible solution here that I am missing.

  Read the article

• Route all traffic of home network through VPN [migrated]

  - by user436118

  I have a typical semi advanced home network scenario: A cable modem - eth A wireless router (netgear n600) eth and wlan A home server (Running ubuntu 12.04 LTS, connected over wlan) A bunch of wireless clients (wlan) Lying around I have anoher cheaper wlan router, and two different USB wlan NIC's that are known to work with Linux. ACTA struck. I want to route ALL of my WAN traffic through a remote server through a VPN. For sake of completition, lets say there is a remote server running debian sqeeze where a VPN server is to be installed. The network is then to behave so that if the VPN is not operative, it is separated from the outside world. I am familiar with general system/network practices, but lack the specific detailed knowledge to accomplish this. Please suggest the right approach, packages and configurations you'd use to reach said solution. I've also envisioned the following network configuration, please improve it if you see fit: Client ip:10.1.1.x nm:255.0.0.0 gw:10.1.1.1 reached via WLAN Wlan router 1: ip: 10.1.1.1 nm:255.0.0.0 gw: 10.10.10.1 reached via ETH Homeserver: <<< VPN is initiated here, and the other endpoint is somewhere on the internet. eth0: ip:10.10.10.1 nm: 0.0.0.0 gw:192.168.0.1 reached via WLAN Homeserver: wlan0: ip: 192.168.0.2 nm: 255.255.255.0 gw: 192.168.0.1 reached via WLAN Wlan router 2: ip: 192.168.0.1 nm: 0.0.0.0 gw: set via dhcp uplink connector: cable modem Cable Modem: Remote DHCP. Has on-board DHCP server for ethernet device that connects to it, and only works this way. All this WLAN fussery is because my home server is located in a part of the house where a cable link isnt possible unfortunately.

  Read the article

• SQL Server: Network pauses after installing cheap SATA card: Is there a solution?

  - by samsmith

  At the risk of being assigned to the "bad DBA" club... I did something desperate, and may have to undo it. Problem: After installing a low cost eSATA board, my SQL Server is intermittently unresponsive (seemingly when there is a lot of IO to the eSATA drive). Questions: 1) Is there a solution to the intermittent unresponsiveness that allows me to keep the eSATA in place? 2) Whether or not (1==true): What is a decent, low cost way to add 1-3 TB storage to SQL for non-critical SQL DBs? Detail: Our SAN is full, and expanding it is costly and will take a month. I have a pressing need to add 1-3 TB for some development DBs (e.g. not mission critical; data loss is OK). As a bandaid, I threw a $20 eSATA PCI board in the Dell 1950 server, and attached an external 2TB eSATA drive. This seemed to work fine, but I notice that our production SQL DBs, and even remote desktop, now experience network "pauses" that they never did before (with both SQL client apps and remote desktop throwing "networking problem" errors). This SQL Server has lots of memory, and runs an instance of SQL 2005 (where all line of business apps reside) and an instance SQL 2008 (for development db's). SQL Server RAM has been appropriately configured, and this setup has run great for years. The server is: Dell 1950 Win2003 x64 14GB RAM PERC controller, 2 mirrored hd's internal Dell SAN over gbit ethernet, dual homed 2 PCIx slots (1 used by NIC for SAN, 1 now in use for eSATA board) Thank you for suggestions!

  Read the article

• Linux: Three default gateways?

  - by Daniel

  My server has three default gateways, how can that be? Shouldn't there be one default gw? I have three NICs, each attached to a separate subnet: server1:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.5.0.0 * 255.255.255.224 U 0 0 0 eth3 localnet * 255.255.255.224 U 0 0 0 eth0 192.168.8.0 * 255.255.255.192 U 0 0 0 eth1 default 10.5.0.1 0.0.0.0 UG 0 0 0 eth3 default 192.168.8.1 0.0.0.0 UG 0 0 0 eth1 default 10.1.0.1 0.0.0.0 UG 0 0 0 eth0 Sometimes, I can't ping a host on the Internet, sometimes I can. What I want is traffic to the Internet (0.0.0.0) routed through a specific NIC. Can I just add a route for 0.0.0.0 and default gw to one of the eth0-3 interfaces? Will it break my connection? I'm using Debian, here is my /etc/network/interfaces: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet static address 10.1.0.4 netmask 255.255.255.224 network 10.1.0.0 broadcast 10.1.0.31 gateway 10.1.0.1 allow-hotplug eth1 iface eth1 inet static address 192.168.8.4 netmask 255.255.255.192 network 192.168.8.0 broadcast 192.168.8.63 gateway 192.168.8.1 allow-hotplug eth3 iface eth3 inet static address 10.5.0.4 netmask 255.255.255.224 network 10.5.0.0 broadcast 10.5.0.31 gateway 10.5.0.1

  Read the article

• SSH access to VM on windows 8 hyper-v

  - by samw

  I'm currently attending University and prefer a Linux environment to do much of my work, but all I have is a ThinkPad running Windows 8 Pro. Cygwin is nice, but it leaves me missing things like apt-get. My latest solution is to run an Ubuntu 12.04 VM with Windows 8's Client Hyper-V and use Cygwin for SSH access. I've looked everywhere online trying to set this up, but I haven't found much help. I've done this before using VirtualBox, so I figured this would be possible as well. Could anyone provide advice for setting up this environment? I'm completely uninitiated to Linux networking, virtual networking, and... pretty much all networking configuration, so this has been quite a challenge for me. What I've done so far: Created an external virtual switch to my wireless NIC. With this, I could successfully SSH to the VM with the leased IP address. But without a static IP, I would soon get disconnected. Created an internal virtual switch and attempt to "share" my main internet connection. (I was following the description on this page) Thank you all in advance!

  Read the article

• How do we, as a community, help encourage programming in public schools? (Or state Schools for the U

  - by NoMoreZealots

  PRIMARY MOTIVATION My office gets involved with the "First Robotics" competitions and one thing that lingers year to year is the students typically have no preparation for doing even simple programming as part of the public schools system. While the science classes provide some basic grasp of mechanical and electrical concepts, by in large computer programming gets no coverage from the curriculum. (This my be different in other areas of the country/world.) What makes it worse is there is only a short period of time you have to prepare the student's and help them design the robot. Talking to some professors from local colleges, it's a problem because you can't assume even the most basic understanding for freshman CS majors. Languages like Python, Lua and BASIC are simple enough for at least high school level students, if not younger. SCOPE So how do you get public schools to support a programming, at least to the level of "Try it in BASIC" examples that used to be at the end of a chapter in my Algebra book? At least enough to prepare them for event's such as the FIRST Robotic competitions. Which the primary objectives are to teach problem solving and team work, and to possible foster an interest in Math, Science and Engineering in general. (Not force feed to them, as some people her seem to be implying.) Edit: Why teach kids: (Since 2000 CS enrollment in US colleges has decreased by 70% while college enrollment has increased, this is a PROBLEM.) Saying there is no value in teaching someone programming in Jr./High school because they might think "they know programming." Is like saying there's no value in teaching High school science and physics, because they might decide they "know physics." Leading to abuse like: "I passed a high school physics class, I'm going to develop a Unified Quantum Gravitational Theory." Better Prepared students are better students. Instead it would allows college programs to raise the bar on the entry level courses, allowing students to be weeded out based on their understanding of more advanced material. Plus people who did poorly in that in topic in High school aren't as likely to say "I think there's money in computer's so I'll computer science." Plus if people take it in high school and decide THEN that it's not for them, it's better than them wasting their money to PAY a college to figure that out. The result is that people who take the degree are more likely to succeed and be there for the RIGHT reasons. (i.e. It's what they REALLY want to do. And that's REALLY the key to being good at anything.) Programming is like anything else, the more practice and genuine interest you have the better you get. If you start them later, they get less practice. The earlier give them the opportunity to start, the more practice they will get. All other things equal, the more practice the better the programmer.

  Read the article

• What free space thresholds/limits are advisable for 640 GB and 2 TB hard disk drives with ZEVO ZFS on OS X?

  - by Graham Perrin

  Assuming that free space advice for ZEVO will not differ from advice for other modern implementations of ZFS … Question Please, what percentages or amounts of free space are advisable for hard disk drives of the following sizes? 640 GB 2 TB Thoughts A standard answer for modern implementations of ZFS might be "no more than 96 percent full". However if apply that to (say) a single-disk 640 GB dataset where some of the files most commonly used (by VirtualBox) are larger than 15 GB each, then I guess that blocks for those files will become sub optimally spread across the platters with around 26 GB free. I read that in most cases, fragmentation and defragmentation should not be a concern with ZFS. Sill, I like the mental picture of most fragments of a large .vdi in reasonably close proximity to each other. (Do features of ZFS make that wish for proximity too old-fashioned?) Side note: there might arise the question of how to optimise performance after a threshold is 'broken'. If it arises, I'll keep it separate. Background On a 640 GB StoreJet Transcend (product ID 0x2329) in the past I probably went beyond an advisable threshold. Currently the largest file is around 17 GB –  – and I doubt that any .vdi or other file on this disk will grow beyond 40 GB. (Ignore the purple masses, those are bundles of 8 MB band files.) Without HFS Plus: the thresholds of twenty, ten and five percent that I associate with Mobile Time Machine file system need not apply. I currently use ZEVO Community Edition 1.1.1 with Mountain Lion, OS X 10.8.2, but I'd like answers to be not too version-specific. References, chronological order ZFS Block Allocation (Jeff Bonwick's Blog) (2006-11-04) Space Maps (Jeff Bonwick's Blog) (2007-09-13) Doubling Exchange Performance (Bizarre ! Vous avez dit Bizarre ?) (2010-03-11) … So to solve this problem, what went in 2010/Q1 software release is multifold. The most important thing is: we increased the threshold at which we switched from 'first fit' (go fast) to 'best fit' (pack tight) from 70% full to 96% full. With TB drives, each slab is at least 5GB and 4% is still 200MB plenty of space and no need to do anything radical before that. This gave us the biggest bang. Second, instead of trying to reuse the same primary slabs until it failed an allocation we decided to stop giving the primary slab this preferential threatment as soon as the biggest allocation that could be satisfied by a slab was down to 128K (metaslab_df_alloc_threshold). At that point we were ready to switch to another slab that had more free space. We also decided to reduce the SMO bonus. Before, a slab that was 50% empty was preferred over slabs that had never been used. In order to foster more write aggregation, we reduced the threshold to 33% empty. This means that a random write workload now spread to more slabs where each one will have larger amount of free space leading to more write aggregation. Finally we also saw that slab loading was contributing to lower performance and implemented a slab prefetch mechanism to reduce down time associated with that operation. The conjunction of all these changes lead to 50% improved OLTP and 70% reduced variability from run to run … OLTP Improvements in Sun Storage 7000 2010.Q1 (Performance Profiles) (2010-03-11) Alasdair on Everything » ZFS runs really slowly when free disk usage goes above 80% (2010-07-18) where commentary includes: … OpenSolaris has changed this in onnv revision 11146 … [CFT] Improved ZFS metaslab code (faster write speed) (2010-08-22)

  Read the article

• OpenVPN - Windows 8 to Windows 2008 Server, not connecting

  - by niico

  I have followed this tutorial about setting up an OpenVPN Server on Windows Server - and a client on Windows (in this case Windows 8). The server appears to be running fine - but it is not connecting with this error: Mon Jul 22 19:09:04 2013 Warning: cannot open --log file: C:\Program Files\OpenVPN\log\my-laptop.log: Access is denied. (errno=5) Mon Jul 22 19:09:04 2013 OpenVPN 2.3.2 x86_64-w64-mingw32 [SSL (OpenSSL)] [LZO] [PKCS11] [eurephia] [IPv6] built on Jun 3 2013 Mon Jul 22 19:09:04 2013 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:25340 Mon Jul 22 19:09:04 2013 Need hold release from management interface, waiting... Mon Jul 22 19:09:05 2013 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:25340 Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'state on' Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'log all on' Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'hold off' Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'hold release' Mon Jul 22 19:09:05 2013 Socket Buffers: R=[65536->65536] S=[65536->65536] Mon Jul 22 19:09:05 2013 UDPv4 link local: [undef] Mon Jul 22 19:09:05 2013 UDPv4 link remote: [AF_INET]66.666.66.666:9999 Mon Jul 22 19:09:05 2013 MANAGEMENT: >STATE:1374494945,WAIT,,, Mon Jul 22 19:10:05 2013 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity) Mon Jul 22 19:10:05 2013 TLS Error: TLS handshake failed Mon Jul 22 19:10:05 2013 SIGUSR1[soft,tls-error] received, process restarting Mon Jul 22 19:10:05 2013 MANAGEMENT: >STATE:1374495005,RECONNECTING,tls-error,, Mon Jul 22 19:10:05 2013 Restart pause, 2 second(s) Note I have changed the IP and port no (it uses a non-standard port for security reasons). That port is open on the hardware firewall. The server logs are showing a connection attempt from my client: TLS: Initial packet from [AF_INET]118.68.xx.xx:65011, sid=081af4ed xxxxxxxx Mon Jul 22 14:19:15 2013 118.68.xx.xx:65011 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity) How can I problem solve this & find the problem? Thx Update - Client config file: ############################################## # Sample client-side OpenVPN 2.0 config file # # for connecting to multi-client server. # # # # This configuration can be used by multiple # # clients, however each client should have # # its own cert and key files. # # # # On Windows, you might want to rename this # # file so it has a .ovpn extension # ############################################## # Specify that we are a client and that we # will be pulling certain config file directives # from the server. client # Use the same setting as you are using on # the server. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. ;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel # if you have more than one. On XP SP2, # you may need to disable the firewall # for the TAP adapter. ;dev-node MyTap # Are we connecting to a TCP or # UDP server? Use the same setting as # on the server. ;proto tcp proto udp # The hostname/IP and port of the server. # You can have multiple remote entries # to load balance between the servers. remote 00.00.00.00 1194 ;remote 00.00.00.00 9999 ;remote my-server-2 1194 # Choose a random host from the remote # list for load-balancing. Otherwise # try hosts in the order specified. ;remote-random # Keep trying indefinitely to resolve the # host name of the OpenVPN server. Very useful # on machines which are not permanently connected # to the internet such as laptops. resolv-retry infinite # Most clients don't need to bind to # a specific local port number. nobind # Downgrade privileges after initialization (non-Windows only) ;user nobody ;group nobody # Try to preserve some state across restarts. persist-key persist-tun # If you are connecting through an # HTTP proxy to reach the actual OpenVPN # server, put the proxy server/IP and # port number here. See the man page # if your proxy server requires # authentication. ;http-proxy-retry # retry on connection failures ;http-proxy [proxy server] [proxy port #] # Wireless networks often produce a lot # of duplicate packets. Set this flag # to silence duplicate packet warnings. ;mute-replay-warnings # SSL/TLS parms. # See the server config file for more # description. It's best to use # a separate .crt/.key file pair # for each client. A single ca # file can be used for all clients. ca "C:\\Program Files\\OpenVPN\\config\\ca.crt" cert "C:\\Program Files\\OpenVPN\\config\\my-laptop.crt" key "C:\\Program Files\\OpenVPN\\config\\my-laptop.key" # Verify server certificate by checking # that the certicate has the nsCertType # field set to "server". This is an # important precaution to protect against # a potential attack discussed here: # http://openvpn.net/howto.html#mitm # # To use this feature, you will need to generate # your server certificates with the nsCertType # field set to "server". The build-key-server # script in the easy-rsa folder will do this. ns-cert-type server # If a tls-auth key is used on the server # then every client must also have the key. ;tls-auth ta.key 1 # Select a cryptographic cipher. # If the cipher option is used on the server # then you must also specify it here. ;cipher x # Enable compression on the VPN link. # Don't enable this unless it is also # enabled in the server config file. comp-lzo # Set log file verbosity. verb 3 # Silence repeating messages ;mute 20 Server config file: ################################################# # Sample OpenVPN 2.0 config file for # # multi-client server. # # # # This file is for the server side # # of a many-clients <-> one-server # # OpenVPN configuration. # # # # OpenVPN also supports # # single-machine <-> single-machine # # configurations (See the Examples page # # on the web site for more info). # # # # This config should work on Windows # # or Linux/BSD systems. Remember on # # Windows to quote pathnames and use # # double backslashes, e.g.: # # "C:\\Program Files\\OpenVPN\\config\\foo.key" # # # # Comments are preceded with '#' or ';' # ################################################# # Which local IP address should OpenVPN # listen on? (optional) ;local 00.00.00.00 # Which TCP/UDP port should OpenVPN listen on? # If you want to run multiple OpenVPN instances # on the same machine, use a different port # number for each one. You will need to # open up this port on your firewall. std 1194 port 1194 # TCP or UDP server? ;proto tcp proto udp # "dev tun" will create a routed IP tunnel, # "dev tap" will create an ethernet tunnel. # Use "dev tap0" if you are ethernet bridging # and have precreated a tap0 virtual interface # and bridged it with your ethernet interface. # If you want to control access policies # over the VPN, you must create firewall # rules for the the TUN/TAP interface. # On non-Windows systems, you can give # an explicit unit number, such as tun0. # On Windows, use "dev-node" for this. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. ;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel if you # have more than one. On XP SP2 or higher, # you may need to selectively disable the # Windows firewall for the TAP adapter. # Non-Windows systems usually don't need this. ;dev-node MyTap # SSL/TLS root certificate (ca), certificate # (cert), and private key (key). Each client # and the server must have their own cert and # key file. The server and all clients will # use the same ca file. # # See the "easy-rsa" directory for a series # of scripts for generating RSA certificates # and private keys. Remember to use # a unique Common Name for the server # and each of the client certificates. # # Any X509 key management system can be used. # OpenVPN can also use a PKCS #12 formatted key file # (see "pkcs12" directive in man page). ca "C:\\Program Files\\OpenVPN\\config\\ca.crt" cert "C:\\Program Files\\OpenVPN\\config\\server.crt" key "C:\\Program Files\\OpenVPN\\config\\server.key" # Diffie hellman parameters. # Generate your own with: # openssl dhparam -out dh1024.pem 1024 # Substitute 2048 for 1024 if you are using # 2048 bit keys. dh "C:\\Program Files\\OpenVPN\\config\\dh2048.pem" # Configure server mode and supply a VPN subnet # for OpenVPN to draw client addresses from. # The server will take 10.8.0.1 for itself, # the rest will be made available to clients. # Each client will be able to reach the server # on 10.8.0.1. Comment this line out if you are # ethernet bridging. See the man page for more info. server 10.8.0.0 255.255.255.0 # Maintain a record of client <-> virtual IP address # associations in this file. If OpenVPN goes down or # is restarted, reconnecting clients can be assigned # the same virtual IP address from the pool that was # previously assigned. ifconfig-pool-persist ipp.txt # Configure server mode for ethernet bridging. # You must first use your OS's bridging capability # to bridge the TAP interface with the ethernet # NIC interface. Then you must manually set the # IP/netmask on the bridge interface, here we # assume 10.8.0.4/255.255.255.0. Finally we # must set aside an IP range in this subnet # (start=10.8.0.50 end=10.8.0.100) to allocate # to connecting clients. Leave this line commented # out unless you are ethernet bridging. ;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 # Configure server mode for ethernet bridging # using a DHCP-proxy, where clients talk # to the OpenVPN server-side DHCP server # to receive their IP address allocation # and DNS server addresses. You must first use # your OS's bridging capability to bridge the TAP # interface with the ethernet NIC interface. # Note: this mode only works on clients (such as # Windows), where the client-side TAP adapter is # bound to a DHCP client. ;server-bridge # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. ;push "route 192.168.10.0 255.255.255.0" ;push "route 192.168.20.0 255.255.255.0" # To assign specific IP addresses to specific # clients or if a connecting client has a private # subnet behind it that should also have VPN access, # use the subdirectory "ccd" for client-specific # configuration files (see man page for more info). # EXAMPLE: Suppose the client # having the certificate common name "Thelonious" # also has a small subnet behind his connecting # machine, such as 192.168.40.128/255.255.255.248. # First, uncomment out these lines: ;client-config-dir ccd ;route 192.168.40.128 255.255.255.248 # Then create a file ccd/Thelonious with this line: # iroute 192.168.40.128 255.255.255.248 # This will allow Thelonious' private subnet to # access the VPN. This example will only work # if you are routing, not bridging, i.e. you are # using "dev tun" and "server" directives. # EXAMPLE: Suppose you want to give # Thelonious a fixed VPN IP address of 10.9.0.1. # First uncomment out these lines: ;client-config-dir ccd ;route 10.9.0.0 255.255.255.252 # Then add this line to ccd/Thelonious: # ifconfig-push 10.9.0.1 10.9.0.2 # Suppose that you want to enable different # firewall access policies for different groups # of clients. There are two methods: # (1) Run multiple OpenVPN daemons, one for each # group, and firewall the TUN/TAP interface # for each group/daemon appropriately. # (2) (Advanced) Create a script to dynamically # modify the firewall in response to access # from different clients. See man # page for more info on learn-address script. ;learn-address ./script # If enabled, this directive will configure # all clients to redirect their default # network gateway through the VPN, causing # all IP traffic such as web browsing and # and DNS lookups to go through the VPN # (The OpenVPN server machine may need to NAT # or bridge the TUN/TAP interface to the internet # in order for this to work properly). ;push "redirect-gateway def1 bypass-dhcp" # Certain Windows-specific network settings # can be pushed to clients, such as DNS # or WINS server addresses. CAVEAT: # http://openvpn.net/faq.html#dhcpcaveats # The addresses below refer to the public # DNS servers provided by opendns.com. ;push "dhcp-option DNS 208.67.222.222" ;push "dhcp-option DNS 208.67.220.220" # Uncomment this directive to allow differenta # clients to be able to "see" each other. # By default, clients will only see the server. # To force clients to only see the server, you # will also need to appropriately firewall the # server's TUN/TAP interface. ;client-to-client # Uncomment this directive if multiple clients # might connect with the same certificate/key # files or common names. This is recommended # only for testing purposes. For production use, # each client should have its own certificate/key # pair. # # IF YOU HAVE NOT GENERATED INDIVIDUAL # CERTIFICATE/KEY PAIRS FOR EACH CLIENT, # EACH HAVING ITS OWN UNIQUE "COMMON NAME", # UNCOMMENT THIS LINE OUT. ;duplicate-cn # The keepalive directive causes ping-like # messages to be sent back and forth over # the link so that each side knows when # the other side has gone down. # Ping every 10 seconds, assume that remote # peer is down if no ping received during # a 120 second time period. keepalive 10 120 # For extra security beyond that provided # by SSL/TLS, create an "HMAC firewall" # to help block DoS attacks and UDP port flooding. # # Generate with: # openvpn --genkey --secret ta.key # # The server and each client must have # a copy of this key. # The second parameter should be '0' # on the server and '1' on the clients. ;tls-auth ta.key 0 # This file is secret # Select a cryptographic cipher. # This config item must be copied to # the client config file as well. ;cipher BF-CBC # Blowfish (default) ;cipher AES-128-CBC # AES ;cipher DES-EDE3-CBC # Triple-DES # Enable compression on the VPN link. # If you enable it here, you must also # enable it in the client config file. comp-lzo # The maximum number of concurrently connected # clients we want to allow. ;max-clients 100 # It's a good idea to reduce the OpenVPN # daemon's privileges after initialization. # # You can uncomment this out on # non-Windows systems. ;user nobody ;group nobody # The persist options will try to avoid # accessing certain resources on restart # that may no longer be accessible because # of the privilege downgrade. persist-key persist-tun # Output a short status file showing # current connections, truncated # and rewritten every minute. status openvpn-status.log # By default, log messages will go to the syslog (or # on Windows, if running as a service, they will go to # the "\Program Files\OpenVPN\log" directory). # Use log or log-append to override this default. # "log" will truncate the log file on OpenVPN startup, # while "log-append" will append to it. Use one # or the other (but not both). ;log openvpn.log ;log-append openvpn.log # Set the appropriate level of log # file verbosity. # # 0 is silent, except for fatal errors # 4 is reasonable for general usage # 5 and 6 can help to debug connection problems # 9 is extremely verbose verb 3 # Silence repeating messages. At most 20 # sequential messages of the same message # category will be output to the log. ;mute 20 I have changed IP's for security

  Read the article

• Solaris 11 Launch Blog Carnival Roundup

  - by constant

  Solaris 11 is here! And together with the official launch activities, a lot of Oracle and non-Oracle bloggers contributed helpful and informative blog articles to help your datacenter go to eleven. Here are some notable blog postings, sorted by category for your Solaris 11 blog-reading pleasure: Getting Started/Overview A lot of people speculated that the official launch of Solaris 11 would be on 11/11 (whatever way you want to turn it), but it actually happened two days earlier. Larry Wake himself offers 11 Reasons Why Oracle Solaris 11 11/11 Isn't Being Released on 11/11/11. Then, Larry goes on with a summary: Oracle Solaris 11: The First Cloud OS gives you a short and sweet rundown of what the major new features of Solaris 11 are. Jeff Victor has his own list of What's New in Oracle Solaris 11. A popular Solaris 11 meme is to write a blog post about 11 favourite features: Jim Laurent's 11 Reasons to Love Solaris 11, Darren Moffat's 11 Favourite Solaris 11 Features, Mike Gerdt's 11 of My Favourite Things! are just three examples of "11 Favourite Things..." type blog posts, I'm sure many more will follow... More official overview content for Solaris 11 is available from the Oracle Tech Network Solaris 11 Portal. Also, check out Rick Ramsey's blog post Solaris 11 Resources for System Administrators on the OTN Blog and his secret 5 Commands That Make Solaris Administration Easier post from the OTN Garage. (Automatic) Installation and the Image Packaging System (IPS) The brand new Image Packaging System (IPS) and the Automatic Installer (IPS), together with numerous other install/packaging/boot/patching features are among the most significant improvements in Solaris 11. But before installing, you may wonder whether Solaris 11 will support your particular set of hardware devices. Again, the OTN Garage comes to the rescue with Rick Ramsey's post How to Find Out Which Devices Are Supported By Solaris 11. Included is a useful guide to all the first steps to get your Solaris 11 system up and running. Tim Foster had a whole handful of blog posts lined up for the launch, teaching you everything you need to know about IPS but didn't dare to ask: The IPS System Repository, IPS Self-assembly - Part 1: Overlays and Part 2: Multiple Packages Delivering Configuration. Watch out for more IPS posts from Tim! If installing packages or upgrading your system from the net makes you uneasy, then you're not alone: Jim Laurent will tech you how Building a Solaris 11 Repository Without Network Connection will make your life easier. Many of you have already peeked into the future by installing Solaris 11 Express. If you're now wondering whether you can upgrade or whether a fresh install is necessary, then check out Alan Hargreaves's post Upgrading Solaris 11 Express b151a with support to Solaris 11. The trick is in upgrading your pkg(1M) first. Networking One of the first things to do after installing Solaris 11 (or any operating system for that matter), is to set it up for networking. Solaris 11 comes with the brand new "Network Auto-Magic" feature which can figure out everything by itself. For those cases where you want to exercise a little more control, Solaris 11 left a few people scratching their heads. Fortunately, Tschokko wrote up this cool blog post: Solaris 11 manual IPv4 & IPv6 configuration right after the launch ceremony. Thanks, Tschokko! And Milek points out a long awaited networking feature in Solaris 11 called Solaris 11 - hostmodel, which I know for a fact that many customers have looked forward to: How to "bind" a Solaris 11 system to a specific gateway for specific IP address it is using. Steffen Weiberle teaches us how to tune the Solaris 11 networking stack the proper way: ipadm(1M). No more fiddling with ndd(1M)! Check out his tutorial on Solaris 11 Network Tunables. And if you want to get even deeper into the networking stack, there's nothing better than DTrace. Alan Maguire teaches you in: DTracing TCP Congestion Control how to probe deeply into the Solaris 11 TCP/IP stack, the TCP congestion control part in particular. Don't miss his other DTrace and TCP related blog posts! DTrace And there we are: DTrace, the king of all observability tools. Long time DTrace veteran and co-author of The DTrace book*, Brendan Gregg blogged about Solaris 11 DTrace syscall provider changes. BTW, after you install Solaris 11, check out the DTrace toolkit which is installed by default in /usr/dtrace/DTT. It is chock full of handy DTrace scripts, many of which contributed by Brendan himself! Security Another big theme in Solaris 11, and one that is crucial for the success of any operating system in the Cloud is Security. Here are some notable posts in this category: Darren Moffat starts by showing us how to completely get rid of root: Completely Disabling Root Logins on Solaris 11. With no root user, there's one major entry point less to worry about. But that's only the start. In Immutable Zones on Encrypted ZFS, Darren shows us how to double the security of your services: First by locking them into the new Immutable Zones feature, then by encrypting their data using the new ZFS encryption feature. And if you're still missing sudo from your Linux days, Darren again has a solution: Password (PAM) caching for Solaris su - "a la sudo". If you're wondering how much compute power all this encryption will cost you, you're in luck: The Solaris X86 AESNI OpenSSL Engine will make sure you'll use your Intel's embedded crypto support to its fullest. And if you own a brand new SPARC T4 machine you're even luckier: It comes with its own SPARC T4 OpenSSL Engine. Dan Anderson's posts show how there really is now excuse not to encrypt any more... Developers Solaris 11 has a lot to offer to developers as well. Ali Bahrami has a series of blog posts that cover diverse developer topics: elffile: ELF Specific File Identification Utility, Using Stub Objects and The Stub Proto: Not Just For Stub Objects Anymore to name a few. BTW, if you're a developer and want to shape the future of Solaris 11, then Vijay Tatkar has a hint for you: Oracle (Sun Systems Group) is hiring! Desktop and Graphics Yes, Solaris 11 is a 100% server OS, but it can also offer a decent desktop environment, especially if you are a developer. Alan Coopersmith starts by discussing S11 X11: ye olde window system in today's new operating system, then Calum Benson shows us around What's new on the Solaris 11 Desktop. Even accessibility is a first-class citizen in the Solaris 11 user interface. Peter Korn celebrates: Accessible Oracle Solaris 11 - released! Performance Gone are the days of "Slowaris", when Solaris was among the few OSes that "did the right thing" while others cut corners just to win benchmarks. Today, Solaris continues doing the right thing, and it delivers the right performance at the same time. Need proof? Check out Brian's BestPerf blog with continuous updates from the benchmarking lab, including Recent Benchmarks Using Oracle Solaris 11! Send Me More Solaris 11 Launch Articles! These are just a few of the more interesting blog articles that came out around the Solaris 11 launch, I'm sure there are many more! Feel free to post a comment below if you find a particularly interesting blog post that hasn't been listed so far and share your enthusiasm for Solaris 11! *Affiliate link: Buy cool stuff and support this blog at no extra cost. We both win! var flattr_uid = '26528'; var flattr_tle = 'Solaris 11 Launch Blog Carnival Roundup'; var flattr_dsc = '<strong>Solaris 11 is here!</strong>And together with the official launch activities, a lot of Oracle and non-Oracle bloggers contributed helpful and informative blog articles to help your datacenter <a href="http://en.wikipedia.org/wiki/Up_to_eleven">go to eleven</a>.Here are some notable blog postings, sorted by category for your Solaris 11 blog-reading pleasure:'; var flattr_tag = 'blogging,digest,Oracle,Solaris,solaris,solaris 11'; var flattr_cat = 'text'; var flattr_url = 'http://constantin.glez.de/blog/2011/11/solaris-11-launch-blog-carnival-roundup'; var flattr_lng = 'en_GB'

  Read the article

• Probation is Over: PASS Board Year 1, Q2

  - by Denise McInerney

  Though it's not always official every job begins with a probation period. You start out with lots of questions and every day you find out how much more you have to learn. Usually after a few months you discover that you can actually answer some questions and have at least an idea of what you are supposed to be doing. Now at the end of my second quarter on the "job" of serving on the PASS Board I have reached that point. My probation period is over. The last three months were busy for the entire Board with the budget process, an in-person meeting and moving forward with PASS Global Growth plans. I had also set a specific goal for myself for my 2nd quarter: to see the Board to adopt a Code of Conduct for the PASS Summit. Code of Conduct When I ran for the Board I included my desire to see PASS establish a code of conduct in my campaign platform.  I was motivated to do this for a few reasons. Other technical conferences have had incidents of harassment. Most of these did not have a policy in place prior to having a problem, though several conference organizers have since adopted anti-harassment policies or codes of conduct. I felt it would be in PASS' interest to establish a policy so we would be prepared should there be an incident.   "This is Community" Adopting a code of conduct would reinforce our community orientation and send a message about the positive character of the Summit. PASS is a leader among technical organizations for its promotion and support of women. Adopting a code of conduct would further demonstrate our leadership in this area. After researching similar polices from other organizations I published a first draft in April. I solicited feedback from the Board, HQ staff and some PASS members. Incorporating that feedback I presented version 4 at the May Board meeting, where we had a good discussion. You can read the meeting minutes for details. I incorporated points from  the Board discussion as well as feedback from a legal review to produce a final version which has been submitted to the Board. It will be discussed at the Board meeting July 12. You can read the full text at the end of this post. Virtual Chapters In the first quarter we started ramping up marketing support for the Virtual Chapters. Since then each edition of the Connector has highlighted a different VC to help get out the message about the variety of eductional opporutnities that are offered. These VC profiles will continue in the coming months. I was very pleased to welcome the new DBA Fundamentals VC which is geared toward new DBAs, people who are considering entering the field and those transitioning from a different IT role. Thanks to the contributions of Erin Stellato, Michelle Nalliah and Karla Landrum we published a "Virtual Chapter Guidebook". This document includes great advice on how to build and promote a VC. It's also a reference for how things work, from budgets to webinar hosting. I think this document will be extremely valuable to all our VC leaders and am grateful to those who put it together. Board Meeting/SQL Rally The Board met in May in Dallas. Among the items discussed were Global Growth, the budget, future events and the upcoming elections. We covered a lot of ground in two days and I will again refer you to the meeting minutes for details. The meeting schedule allowed us to participate in the SQL Rally networking events and one full day of the conference. I enjoyed having the opportunity to meet and talk with many PASS members. And my hat is off to the SQL Rally organizers who put on an outstanding event. Global Growth PASS has undertaken a major intitiative to reach and engage SQL Server professionals around the world. This Global Growth plan is ambitious and will have a significant impact on the strategic direction of the organization. We have been reaching out to the community for feedback, including hosting Twitter chats and live Town Hall meetings. I co-hosted two of these events and appreciated hearing the different perspectives of the people who participated If you have not done so I encourage you to read about the Global Growth vision and proposed governance changes  and submit your feedback. FY13 Budget July 1 is the beginning of PASS' fiscal year, which makes the end of June the deadline for approving a budget. Each director submits a budget for his or her portfolio. For the Virtual Chapter portfolio I focused on how we can allocate resources to grow the VCs. Budgeting is a give-and-take process, and while I didn't get everything I asked for I'm pleased the FY13 budget includes a significant increase in financial support for the Virtual Chapters. Many people put a lot of work into the budget, but no two people deserve credit more than VP of Finance Douglas McDowell and Accounting Manager Sandy Cherry. Thanks to both of them for getting us across the goal line on time. SQL Saturday I attended SQL Saturdays in Orange Co. CA and Phoenix. It's always inspiring to see the enthusiasm in the community for learning and networking. These events are successful due to the hard work of many volunteers. Thanks to the organizers in both cities for all your efforts. Next Up This quarter we'll be gearing up plans for the VCs at the Summit and exploring ways the VCs can best support PASS' Global Growth work. I'll also be wrapping up work on the Code of Conduct and attending a Board meeting in September. And I will be at SQL Saturday #144 in Sacramento later this month. Here is the language of the Code of Conduct I have submitted to the Board for consideration: PASS Code of Conduct The PASS Summit provides database professionals from a variety of backgrounds with an opportunity to connect, share and learn.  We value the strong sense of community that characterizes this event and we seek to foster an inclusive, professional atmosphere. We are dedicated to providing a harassment-free conference experience for everyone, regardless of gender, race, sexual orientation, disability, physical appearance, religion or any other protected classification.  Everyone at the Summit is expected to follow the Code of Conduct. This includes but is not limited to: PASS Staff, Exhibitors, Speakers, Attendees and anyone affiliated with the event. Participants are expected to follow the Code of Conduct at all Summit events, including PASS-sponsored social events. Participant behavior Harassment includes, but is not limited to, offensive verbal comments related to gender, race, sexual orientation, disability, physical appearance, religion, or any other protected classification.  Intimidation, threats, stalking, harassing photography or recording, sustained disruption of talks or other events, inappropriate physical contact and unwelcome attention will also be considered harassment. Similarly, sexual, racist, derogatory, threatening or other inappropriate language and imagery are not appropriate for any conference venue, including sessions.  Recourse If a participant engages in any conduct that is prohibited under this Code of Conduct, the conference organizers may take any action they deem appropriate, including warning the offender or expelling the offender from the conference. No refunds will be granted to attendees expelled from the Summit due to violations of the Code of Conduct. If you are being harassed, witness harassment, or have any other concerns, please contact a member of conference staff immediately. Conference staff can be identified by their “Headquarters/Staff” shirts and are trained to handle the situation appropriately. A Code of Conduct Committee (CCC) made up of the Executive Manager and three members of the Board of Directors designated by the President will be authorized to take action in response to an incident or behavior that violates the Code of Conduct.

  Read the article

• php curl login problem

  - by user331329

  <?php // create a new CURL resource $file_path = '/mail'; define("COOKIE_FILE", "c:\cookie.txt"); $ch = curl_init(); // set URL and other appropriate options curl_setopt($ch, CURLOPT_URL, "https://mail.gov.in/iwc/signin"); curl_setopt($ch, CURLOPT_HEADER, 0); curl_setopt ($ch, CURLOPT_SSL_VERIFYPEER, FALSE); curl_setopt ($ch, CURLOPT_USERAGENT, "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.6) Gecko/20070725 Firefox/2.0.0.6"); curl_setopt ($ch, CURLOPT_TIMEOUT, 60); curl_setopt ($ch, CURLOPT_FOLLOWLOCATION, 1); curl_setopt ($ch, CURLOPT_RETURNTRANSFER, 1); curl_setopt ($ch, CURLOPT_COOKIESESSION, TRUE); session_write_close(); $strCookie = 'PHPSESSID=d095af0e30afc021dd3652734009' . $_COOKIE['PHPSESSID'] . '; path=/mail'; curl_setopt( $ch, CURLOPT_COOKIE, $strCookie ); curl_setopt ($ch, CURLOPT_COOKIEJAR, COOKIE_FILE); curl_setopt($ch, CURLOPT_COOKIEFILE, COOKIE_FILE); curl_setopt ($ch, CURLOPT_POST, 1); curl_setopt ($ch, CURLOPT_POSTFIELDS,'fromLogin=true&domainName=nic.in&username=&password=&button=Sign%20In'); $url = curl_getinfo($ch); // grab URL and pass it to the browser $data = curl_exec($ch); echo $data."<pre>"; echo "<pre>"; print_r($url); // close CURL resource, and free up system resources curl_close($ch); ?> whats wrong with my code why i am not able to login directly in their mail

  Read the article

• Shutdown and WakeUp Script C#

  - by Stephen Murby

  Hiya I am very new to C#, infact this is basically my first task set by work whilst i learn the language. Yes i am also new to programming, be gentle :). Context: My script needs to query active directory, grab of OU's and put them to a combo box in a form. Next query ActDir for a list of machines in a selected OU (Done this in a vbscript already) Next query the machines in turn for there IP, and MAC addresses.(Done this in a vbscript already) Next needs to shut those machines down(Done this in a vbscript already) and dump all the machine and NIC info to a txt file The other half of the script grabs the info for the machines out of the text file and sends them a magic packet to wake them up. The shutdown section i have already written a VBscript for, but decided it wasn't future prrof, and i was learninc C# at home, so figured it was the best option to start over with. Im not looking for anyone to write this for me, but if anyone had any pointers on where to go for information etc. . . It would be more than appreciated :)

  Read the article

• SEO: A whois server that work for .SE domains?

  - by Niels Bosma

  I'm developing a small domain checker and I can't get .SE to work: public string Lookup(string domain, RecordType recordType, SeoToolsSettings.Tld tld) { TcpClient tcp = new TcpClient(); tcp.Connect(tld.WhoIsServer, 43); string strDomain = recordType.ToString() + " " + domain + "\r\n"; byte[] bytDomain = Encoding.ASCII.GetBytes(strDomain.ToCharArray()); Stream s = tcp.GetStream(); s.Write(bytDomain, 0, strDomain.Length); StreamReader sr = new StreamReader(tcp.GetStream(), Encoding.ASCII); string strLine = ""; StringBuilder builder = new StringBuilder(); while (null != (strLine = sr.ReadLine())) { builder.AppendLine(strLine); } tcp.Close(); if (tld.WhoIsDelayMs > 0) System.Threading.Thread.Sleep(tld.WhoIsDelayMs); return builder.ToString(); } I've tried whois servers whois.nic-se.se and whois.iis.se put I keep getting: # Copyright (c) 1997- .SE (The Internet Infrastructure Foundation). # All rights reserved. # The information obtained through searches, or otherwise, is protected # by the Swedish Copyright Act (1960:729) and international conventions. # It is also subject to database protection according to the Swedish # Copyright Act. # Any use of this material to target advertising or # similar activities is forbidden and will be prosecuted. # If any of the information below is transferred to a third # party, it must be done in its entirety. This server must # not be used as a backend for a search engine. # Result of search for registered domain names under # the .SE top level domain. # The data is in the UTF-8 character set and the result is # printed with eight bits. "domain google.se" not found. Edit: I've tried changing to UTF8 with no other result. When I try using whois from sysinternals I get the correct result, but not with my code, not even using SE.whois-servers.net. /Niels

  Read the article

• What's a good plugin or guide I can use to create javascript widgets from a Rails App?

  - by nicosuria

  I've been looking around for a while now and the best guide I've seen so far is Dr Nic's DIY widgets how to (here). I haven't been able to make something like this work: Assuming this is my widget code: <script src="http://mysite/nomnoms.js"> </script> And my nomnoms controller looks like (assume that the list partial exists and simply lists down a link to the show page of each nomnom in the @nomnoms variable): class NomnomsController < ApplicationController def index @nomnoms = Nomnom.find(:all) @content = render_to_string(:partial => 'list') end end And in the index.js of my nomnoms_controller I have: page << "document.write('<div>'" page << "document.write('#{@content.to_json}')" page << "</div>" The above setup doesn't render anything :(. But when I change the second line of index.js to: page << "document.write('nomnoms should be here') ...the widget renders the text. Any help or even a point in the right direction would be greatly appreciated. Thanks in advance.

  Read the article

• c multithreading

  - by coubeatczech

  hi, there's a weird behaviour in my threads: void * foo(void * nic){ printf("foo"); } void * threadF(void * ukazatel){ printf("1\n"); pthread_t threadT; pthread_attr_t attr; pthread_attr_init (&attr); pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_JOINABLE); pthread_create(&threadT,NULL,&foo,(void*)NULL); printf("2\n"); while (!feof(stdin)){ int id, in, out; fscanf(stdin,"%d:%d:%d",&id,&in,&out); } } int main(){ pthread_attr_t attr; pthread_attr_init (&attr); pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_JOINABLE); pthread_t threadT; pthread_create(&vlaknoVstupu,&attr,&threadF,(void*)&data); pthread_join(threadT,NULL); pthread_attr_destroy (&attr); } // I skipped irelevant parts of code... the thing is, that sometimes, the output is 12foo, but usually just 12. Then the function waits for input. I would expect it to be always 12foo. Do anybody know why are my expectations wrong?

  Read the article

• Linux network stack : adding protocols with an LKM and dev_add_pack

  - by agent0range

  Hello, I have recently been trying to familiarize myself with the Linux Networking stack and device drivers (have both similarly named O'Reilly books) with the eventual goal of offloading UDP. I have already implemented UDP on the NIC but now the hard part... Rather than ask for assistance on this larger goal I was hoping someone could clarify for me a particular snippet I found that is part of a LKM which registeres a new protocol (OTP) that acts as a filter between the device driver and network stack. http://www.phrack.org/archives/55/p55_0x0c_Building%20Into%20The%20Linux%20Network%20Layer_by_lifeline%20&%20kossak.txt (Note: this Phrack article contains three different modules, code for the OTP is at the bottom of the page) In the init function of his example he has: otp_proto.type = htons(ETH_P_ALL); otp_proto.func = otp_func; dev_add_pack(&otp_proto); which (if I understand correctly) should register otp_proto as a packet sniffer and put it into the ptype_all data structure. My question is about the dev_add_pack. Is it the case that the protocol being registered as a filter will always be placed at this layer between L2 and the device driver? Or, for instance could I make such a filtering occur between the application and transport layers (analyze socket parameters) using the same process? I apologize if this is confusing - I am having some trouble wrapping my head around the bigger picture when it comes to modules altering kernel stack functionality. Thanks

  Read the article

• New record may be written twice in clusterd index structure

  - by Cupidvogel

  As per the article at Microsoft, under the Test 1: INSERT Performance section, it is written that For the table with the clustered index, only a single write operation is required since the leaf nodes of the clustered index are data pages (as explained in the section Clustered Indexes and Heaps), whereas for the table with the nonclustered index, two write operations are required—one for the entry into the index B-tree and another for the insert of the data itself. I don't think that is necessarily true. Clustered Indexes are implemented through B+ tree structures, right? If you look at at this article, which gives a simple example of inserting into a B+ tree, we can see that when 8 is initially inserted, it is written only once, but then when 5 comes in, it is written to the root node as well (thus written twice, albeit not initially at the time of insertion). Also when 8 comes in next, it is written twice, once at the root and then at the leaf. So won't it be correct to say, that the number of rewrites in case of a clustered index is much less compared to a NIC structure (where it must occur every time), instead of saying that rewrite doesn't occur in CI at all?

  Read the article

• how to determine count of tag

  - by peter

  I have a bit of xml file named Sample.xml which is shown below <?xml version="1.0" encoding="ISO-8859-1"?> <countries> <country> <text>Norway</text> <value>N</value> </country> <country> <text>Sweden</text> <value>S</value> </country> <country> <text>France</text> <value>F</value> </country> <country> <text>Italy</text> <value>I</value> </country> </countries> i have button named submit(button1).If i click that button i need to display the count(PartitionName="AIX") in a text box named textBox1, means How many PartitionName="AIX" is belonging to Type="NIC" Can any one give me the c# code I did like this,,but not able to get the answaer private void button1_Click(object sender, EventArgs e) { XmlDocument doc1 = new XmlDocument(); doc1.Load(@"D:\New Folder\WindowsFormsApplication3\WindowsFormsApplication3\Sample.xml"); XmlNodeList a = doc1.GetElementsByTagName("AIX"); textBox1.Text = a.Count.ToString(); }

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43  | Next Page >