Search Results

Search found 14757 results on 591 pages for 'switch statement'.

Page 390/591 | < Previous Page | 386 387 388 389 390 391 392 393 394 395 396 397  | Next Page >

• Perfect is the enemy of “Good Enough”

  - by Daniel Moth

  This is one of the quotes that I was against, but now it is totally part of my core beliefs: "Perfect is the enemy of Good Enough" Folks used to share this quote a lot with me in my early career and my frequent interpretation was that they were incompetent people that were satisfied with mediocrity, i.e. I ignored them and their advice. (Yes, I went through an arrogance phase). I later "grew up" and "realized" that they were missing the point, so instead of ignoring them I would retort: "Of course we have to aim for perfection, because as human beings we'll never achieve perfection, so by aiming for perfection we will indeed achieve good enough results". (Yes, I went through a smart ass phase). Later I grew up a bit more and "understood" that what I was really being told is to finish my work earlier and move on to other things because by trying to perfect that one thing, another N things that I was responsible for were suffering by not getting my attention - all things on my plate need to move beyond the line, not just one of them to go way over the line. It is really a statement of increasing scale and scope. To put it in other words, getting PASS grades on 10 things is better than getting an A+ with distinction on 1-2 and a FAIL on the rest. Instead of saying “I am able to do very well these X items” it is best if you can say I can do well enough on these X * Y items”, where Y > 1. That is how breadth impact is achieved. In the future, I may grow up again and have a different interpretation, but for now - even though I secretly try to "perfect" things, I try not to do that at the expense of other responsibilities. This means that I haven't had anybody quote that saying to me in a while (or perhaps my quality of work has dropped so much that it doesn't apply to me any more - who knows :-)). Wikipedia attributes the quote to Voltaire and it also makes connections to the “Law of diminishing returns”, and to the “80-20 rule” or “Pareto principle”… it commonly takes 20% of the full time to complete 80% of a task while to complete the last 20% of a task takes 80% of the effort …check out the Wikipedia entry on “Perfect is the enemy of Good” and its links. Also use your favorite search engine to search and see what others are saying (Bing, Google) – it is worth internalizing this in a way that makes sense to you… Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• Link instead of Attaching

  - by Daniel Moth

  With email storage not being an issue in many companies (I think I currently have 25GB of storage on my email account, I don’t even think about storage), this encourages bad behaviors such as liberally attaching office documents to emails instead of sharing a link to the document in SharePoint or SkyDrive or some file share etc. Attaching a file admittedly has its usage scenarios too, but it should not be the default. I thought I'd list the reasons why sharing a link can be better than attaching files directly. In no particular order: Better Review. It allows multiple recipients to review the file and their comments are aggregated into a single document. The alternative is everyone having to detach the document, add their comments, then send back to you, and then you have to collate. Wirth the alternative, you also potentially miss out on recipients reading comments from other recipients. Always up to date. The attachment becomes a fork instead of an always up to date document. For example, you send the email on Thursday, I only open it on Tuesday: between those days you could have made updates that now I am missing because you decided to share a link instead of an attachment. Better bookmarking. When I need to find that document you shared, you are forcing me to search through my email (I may not even be running outlook), instead of opening the link which I have bookmarked in my browser or my collection of links in my OneNote or from the recent/pinned links of the office app on my task bar, etc. Can control access. If someone accidentally or naively forwards your link to someone outside your group/org who you’d prefer not to have access to it, the location of the document can be protected with specific access control. Can add more recipients. If someone adds people to the email thread in outlook, your attachment doesn't get re-attached - instead, the person added is left without the attachment unless someone remembers to re-attach it. If it was a link, they are immediately caught up without further actions. Enable Discovery. If you put it on a share, I may be able to discover other cool stuff that lives alongside that document. Save on storage. So this doesn't apply to me given my opening statement, but if in your company you do have such limitations, attaching files eats up storage on all recipients accounts and will also get "lost" when those people archive email (and lose completely at some point if they follow the company retention policy). Like I said, attachments do have their place, but they should be an explicit choice for explicit reasons rather than the default. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• Use Expressions with LINQ to Entities

  - by EltonStoneman

  [Source: http://geekswithblogs.net/EltonStoneman] Recently I've been putting together a generic approach for paging the response from a WCF service. Paging changes the service signature, so it's not as simple as adding a behavior to an existing service in config, but the complexity of the paging is isolated in a generic base class. We're using the Entity Framework talking to SQL Server, so when we ask for a page using LINQ's .Take() method we get a nice efficient SQL query for just the rows we want, with minimal impact on SQL Server and network traffic. We use the maximum ID of the record returned as a high-water mark (rather than using .Skip() to go to the next record), so the approach caters for records being deleted between page requests. In the paged response we include a HasMorePages indicator, computed by comparing the max ID in the page of results to the max ID for the whole resultset - if the latter is bigger, then there are more pages. In some quick performance testing, the paged version of the service performed much more slowly than the unpaged version, which was unexpected. We narrowed it down to the code which gets the max ID for the full resultset - instead of building an efficient MAX() SQL query, EF was returning the whole resultset and then computing the max ID in the service layer. It's easy to reproduce - take this AdventureWorks query:             var context = new AdventureWorksEntities();             var query = from od in context.SalesOrderDetail                         where od.ModifiedDate >= modified                          && od.SalesOrderDetailID.CompareTo(id) > 0                         orderby od.SalesOrderDetailID                         select od;   We can find the maximum SalesOrderDetailID like this:             var maxIdEfficiently = query.Max(od => od.SalesOrderDetailID);   which produces our efficient MAX() SQL query. If we're doing this generically and we already have the ID function in a Func:             Func<SalesOrderDetail, int> idFunc = od => od.SalesOrderDetailID;             var maxIdInefficiently = query.Max(idFunc);   This fetches all the results from the query and then runs the Max() function in code. If you look at the difference in Reflector, the first call passes an Expression to the Max(), while the second call passes a Func. So it's an easy fix - wrap the Func in an Expression:             Expression<Func<SalesOrderDetail, int>> idExpression = od => od.SalesOrderDetailID;             var maxIdEfficientlyAgain = query.Max(idExpression);   - and we're back to running an efficient MAX() statement. Evidently the EF provider can dissect an Expression and build its equivalent in SQL, but it can't do that with Funcs.

  Read the article

• DTLoggedExec 1.1.2008.4 Released!

  - by Davide Mauri

  Today I've relased the latest version of my DTExec replacement tool, DTLoggedExec. The main changes are the following: Used a new strategy for version numbers. Now it will follow the following pattern Major.Minor.TargetSQLServerVersion.Revision Added support for Auto Configurations Fixed a bug that reported incorrect number of errors and warnings to Log Providers Fixed a buf that prevented correct casting of values when using /Set and /Param options Errors and Warnings are now counted more precisely. Updated database and log import scripts to categorize logs by projects and sections. E.g.: Project: MyBIProject; Sections: Staging, Datawarehouse Removed unused report stored procedures from database Updated Samples: 12 samples are now available to show ALL DTLoggedExec features From this version only SSIS 2008 will be supported http://dtloggedexec.codeplex.com/releases/view/62218  It useful to say something more on a couple of specific points: From this version only SSIS 2008 will be supportedYes, Integration Services 2005 are not supported anymore. The latest version capable of running SSIS 2005 Packages is the 1.0.0.2. Updated database and log import scripts to categorize logs by projects and sectionsWhen you import a log file, you can now assign it to a Project and to a Section of that project. In this way it's easier to gather statistical information for an entire project or a subsection of it. This also allows to store logged data of package belonging to different projects in the same database. For example:  Updated SamplesA complete set of samples that shows how to use all DTLoggedExec features are now shipped with the product. Enjoy! Added support for Auto ConfigurationsThis point will have a post on its own, since it's quite important and is by far the biggest new feature introduced in this release. To explain it in a few words, I can just say that you don't need to waste time with complex DTS configuration files or options, since a package will configure itself automatically. You just need to write a single statement as a parameter for DTLoggedExec. This feature can simplify deployment *a lot* :)   I the next days I'll write the mentioned post on Auto-Configurations and i'll update the documentation available on theDTLoggedExec website:   http://dtloggedexec.davidemauri.it/MainPage.ashx

  Read the article

• ClearTrace Performance on 170GB of Trace Files

  - by Bill Graziano

  I’ve always worked to make ClearTrace perform well.  That’s probably because I spend so much time watching it work.  I’m often going through two or three gigabytes of trace files but I rarely get the chance to run it on a really large set of files. One of my clients wanted to run a full trace for a week and then analyze the results.  At the end of that week we had 847 200MB trace files for a total of nearly 170GB. I regularly use 200MB trace files when I monitor production systems.  I usually get around 300,000 statements in a file that size if it’s mostly stored procedures.  So those 847 trace files contained roughly 250 million statements.  (That’s 730 bytes per statement if you’re keeping track.  Newer trace files have some compression in them but I’m not exactly sure what they’re doing.)  On a system running 1,000 statements per second I get a new file every five minutes or so. It took 27 hours to process these files on an older development box.  That works out to 1.77MB/second.  That means ClearTrace processed about 2,654 statements per second. You can query the data while you’re loading it but I’ve found it works better to use a second instance of ClearTrace to do this.  I’m not sure why yet but I think there’s still some dependency between the two processes. ClearTrace is almost always CPU bound.  It’s really just a huge, ugly collection of regular expressions.  It only writes a summary to its database at the end of each trace file so that usually isn’t a bottleneck.  At the end of this process, the executable was using roughly 435MB of RAM.  Certainly more than when it started but I think that’s acceptable. The database where all this is stored started out at 100MB.  After processing 170GB of trace files the database had grown to 203MB.  The space savings are due to the “datawarehouse-ish” design and only storing a summary of each trace file. You can download ClearTrace for SQL Server 2008 or test out the beta version for SQL Server 2012.  Happy Tuning!

  Read the article

• Is OOP hard because it is not natural?

  - by zvrba

  One can often hear that OOP naturally corresponds to the way people think about the world. But I would strongly disagree with this statement: We (or at least I) conceptualize the world in terms of relationships between things we encounter, but the focus of OOP is designing individual classes and their hierarchies. Note that, in everyday life, relationships and actions exist mostly between objects that would have been instances of unrelated classes in OOP. Examples of such relationships are: "my screen is on top of the table"; "I (a human being) am sitting on a chair"; "a car is on the road"; "I am typing on the keyboard"; "the coffee machine boils water", "the text is shown in the terminal window." We think in terms of bivalent (sometimes trivalent, as, for example in, "I gave you flowers") verbs where the verb is the action (relation) that operates on two objects to produce some result/action. The focus is on action, and the two (or three) [grammatical] objects have equal importance. Contrast that with OOP where you first have to find one object (noun) and tell it to perform some action on another object. The way of thinking is shifted from actions/verbs operating on nouns to nouns operating on nouns -- it is as if everything is being said in passive or reflexive voice, e.g., "the text is being shown by the terminal window". Or maybe "the text draws itself on the terminal window". Not only is the focus shifted to nouns, but one of the nouns (let's call it grammatical subject) is given higher "importance" than the other (grammatical object). Thus one must decide whether one will say terminalWindow.show(someText) or someText.show(terminalWindow). But why burden people with such trivial decisions with no operational consequences when one really means show(terminalWindow, someText)? [Consequences are operationally insignificant -- in both cases the text is shown on the terminal window -- but can be very serious in the design of class hierarchies and a "wrong" choice can lead to convoluted and hard to maintain code.] I would therefore argue that the mainstream way of doing OOP (class-based, single-dispatch) is hard because it IS UNNATURAL and does not correspond to how humans think about the world. Generic methods from CLOS are closer to my way of thinking, but, alas, this is not widespread approach. Given these problems, how/why did it happen that the currently mainstream way of doing OOP became so popular? And what, if anything, can be done to dethrone it?

  Read the article

• Create simple jQuery plugin

  - by ybbest

  In the last post, I have shown you how to add the function to jQuery. In this post, I will show you how to create plugin to achieve this. 1. You need to wrap your code in the following construct, this is because you should not use $ directly as $ is global variable, it could have clash with some other library which also use $.Basically, you can pass in jQuery object into the function, so that $ is made available inside the function. (JavaScript use function to create scope, so you can make sure $ is referred to jQuery inside the function ) (function($){ //Your code goes here. }; })(jQuery); 2. Put your code into the construct above. (function ($) { $.getParameterByName = function (name) { name = name.replace(/[\[]/, "\\\[").replace(/[\]]/, "\\\]"); var regexS = "[\\?&]" + name + "=([^&#]*)"; var regex = new RegExp(regexS); var results = regex.exec(window.location.search); if (results == null) return ""; else return decodeURIComponent(results[1].replace(/\+/g, " ")); }; })(jQuery); 3. Now you can reference the code into you project and you can call the method in you JavaScript References: Provides scope for variables Variables are scoped at the function level in javascript. This is different to what you might be used to in a language like C# or Java where the variables are scoped to the block. What this means is if you declare a variable inside a loop or an if statement, it will be available to the entire function. If you ever find yourself needing to explicitly scope a variable inside a function you can use an anonymous function to do this. You can actually create an anonymous function and then execute it straight away and all the variables inside will be scoped to the anonymous function: (function() { var myProperty = "hello world"; alert(myProperty); })(); alert(typeof(myProperty)); // undefined How does an anonymous function in JavaScript work? Building Your First jQuery Plugin A Plugin Development Pattern

  Read the article

• [JAVA]How to make my Oracle update/insert action through JAVA faster?

  - by gunbuster363

  [JAVA]How to make my Oracle update/insert action through JAVA faster? Hi everyone, I am facing a problem in my company that is - our program's speed is not fast enough. To be more specific, we are telecommunication company and this program handle call/internet serfing transaction made by every mobile phone users in our city. Because the amount of download content made by the iphone users is just too much, our program cannot handle them fast enough. The situation is, the amount of transaction made by users are double of the transaction processed by our program. Most of the running time of the program are dominated by DB transactions. I've search through the internet and browsed some sites ( for example: http://www.javaperformancetuning.com/tips/rawtips.shtml ) talking about java performace in DB, but I cannot find a suggestion suitable for us. these advices are not applicable/already used, for instance: 1)Use prepared statements. Use parametrized SQL Already used prepared statement. Each time will use different parameter by clear parameters and set parameters. 2)Tune the SQL to minimize the data returned (e.g. not 'SELECT *'). Sure, already used. 3)Use connection pooling. We hold a single connection during the program's execution. And I doubt that pooling cannot solve the problem because our program act as 1 user, so there are no problem for concurrent access to DB. If anyone of you think pooling is good, please tell me why. Thanks. 4)Try to combine queries and batch updates. Cannot do it. Every query/insert/update is depend on the database's information. For example, we look up the DB for the client's information, if we cannot find his usage, we insert the usage into DB, otherwise we do update. 5)Close resources (Connections, Statements, ResultSets) when finished Sure. 6)Select the fastest JDBC driver. I don't know. I've search on the internet about the type of driver available and I am very confused. We use oracle.jdbc.driver.OracleDriver and we use thin instead of oci, that's all I know. In addition, our program is a two-tier way ( java <- oracle ) 7)turn off auto-commit already done that. Looking forwards to any helps, thank you very much.

  Read the article

• How do you make a bullet ricochet off a vertical wall?

  - by Bagofsheep

  First things first. I am using C# with XNA. My game is top-down and the player can shoot bullets. I've managed to get the bullets to ricochet correctly off horizontal walls. Yet, despite using similar methods (e.g. http://stackoverflow.com/questions/3203952/mirroring-an-angle) and reading other answered questions about this subject I have not been able to get the bullets to ricochet off a vertical wall correctly. Any method I've tried has failed and sometimes made ricocheting off a horizontal wall buggy. Here is the collision code that calls the ricochet method: //Loop through returned tile rectangles from quad tree to test for wall collision. If a collision occurs perform collision logic. for (int r = 0; r < returnObjects.Count; r++) if (Bullets[i].BoundingRectangle.Intersects(returnObjects[r])) Bullets[i].doCollision(returnObjects[r]); Now here is the code for the doCollision method. public void doCollision(Rectangle surface) { if (Ricochet) doRicochet(surface); else Trash = true; } Finally, here is the code for the doRicochet method. public void doRicochet(Rectangle surface) { if (Position.X > surface.Left && Position.X < surface.Right) { //Mirror the bullet's angle. Rotation = -1 * Rotation; //Moves the bullet in the direction of its rotation by given amount. moveFaceDirection(Sprite.Width * BulletScale.X); } else if (Position.Y > surface.Top && Position.Y < surface.Bottom) { } } Since I am only dealing with vertical and horizontal walls at the moment, the if statements simply determine if the object is colliding from the right or left, or from the top or bottom. If the object's X position is within the boundaries of the tile's X boundaries (left and right sides), it must be colliding from the top, and vice verse. As you can see, the else if statement is empty and is where the correct code needs to go.

  Read the article

• Things to do After installing Visual Studio Express 12.

  - by Anirudha

  Originally posted on: http://geekswithblogs.net/anirugu/archive/2013/06/25/things-to-do-after-install-visual-studio-express-12.aspx  1. Environment > Document > Check the option for auto-load changes. By checking this option You can modified the file outside the VWD and VWD don’t tell you for confirmation. 2. Environment > Tabs and Windows > Preview Tab > uncheck the solution Explorer option. This option don’t show you the file when you just click on them in solution explorer. 3. Project and solutions > Check the track active item in solution explorer This option help you to easily figure out which file you working on and where it is in solution explorer . 4. text editor > all settings > word wrap > check this feature to enable word wrap 5. Text-editor > Css > formatting > check the compact rule. this option make you file smaller in size and easily to read. 6. Text-editor > html > miscellaneous > uncheck the auto ID option. Actually When you copy paste the html code Visual studio change their ID if ID is already exist. this option disable that feature. This is useful to do when we write if{} else {} statement and this is not helpful on that case. 7. Package manager > General > browse > copy the location of cache folder and in package source add them as source. This way you can use package that you have use earlier when you are offline. Thanks for read my post

  Read the article

• Accessing Controls Within A Gridview

  - by Bunch

  Sometimes you need to access a control within a GridView, but it isn’t quite as straight forward as just using FindControl to grab the control like you can in a FormView. Since the GridView builds multiple rows the key is to specify the row. In this example there is a GridView with a control for a player’s errors. If the errors is greater than 9 the GridView should display the control (lblErrors) in red so it stands out. Here is the GridView: <asp:GridView ID="gvFielding" runat="server" DataSourceID="sqlFielding" DataKeyNames="PlayerID" AutoGenerateColumns="false" >     <Columns>         <asp:BoundField DataField="PlayerName" HeaderText="Player Name" />         <asp:BoundField DataField="PlayerNumber" HeaderText="Player Number" />         <asp:TemplateField HeaderText="Errors">             <ItemTemplate>                 <asp:Label ID="lblErrors" runat="server" Text='<%# EVAL("Errors") %>'  />             </ItemTemplate>         </asp:TemplateField>     </Columns> </asp:GridView> In the code behind you can add the code to change the label’s ForeColor property to red based on the amount of errors. In this case 10 or more errors triggers the color change. Protected Sub gvFielding_DataBound(ByVal sender As Object, ByVal e As System.EventArgs) Handles gvFielding.DataBound     Dim errorLabel As Label     Dim errors As Integer     Dim i As Integer = 0     For Each row As GridViewRow In gvFielding.Rows         errorLabel = gvFielding.Rows(i).FindControl("lblErrors")         If Not errorLabel.Text = Nothing Then             Integer.TryParse(errorLabel.Text, errors)             If errors > 9 Then                 errorLabel.ForeColor = Drawing.Color.Red             End If         End If         i += 1     Next End Sub The main points in the DataBound sub is use a For Each statement to loop through the rows and to increment the variable i so you loop through every row. That way you check each one and if the value is greater than 9 the label changes to red. The If Not errorLabel.Text = Nothing line is there as a check in case no data comes back at all for Errors. Technorati Tags: GridView,ASP.Net,VB.Net

  Read the article

• Criteria for a programming language to be considered "mature"

  - by Giorgio

  I was recently reading an answer to this question, and I was struck by the statement "The language is mature". So I was wondering what we actually mean when we say that "A programming language is mature"? Normally, a programming language is initially developed out of a need, e.g. Try out / implement a new programming paradigm or a new combination of features that cannot be found in existing languages. Try to solve a problem or overcome a limitation of an existing language. Create a language for teaching programming. Create a language that solves a particular class of problems (e.g. concurrency). Create a language and an API for a special application field, e.g. the web (in this case the language might reuse a well-known paradigm, but the whole API must be new). Create a language to push your competitor out of the market (in this case the creator might want the new language to be very similar to an existing one, in order to attract developers to the new programming language and platform). Regardless of what the original motivation and scenario in which a language has been created, eventually some languages are considered mature. In my intuition, this means that the language has achieved (at least one of) its goals, e.g. "We can now use language X as a reliable tool for writing web applications." This is however a bit vague, so I wanted to ask what you consider the most important criteria (if any) that are applied when saying that a language is mature. IMPORTANT NOTE This question is (on purpose) language-agnostic because I am only interested in general criteria. Please write only language-agnostic answers and comments! I am not asking whether any specific "language X is mature" or "which programming languages can be considered mature", or whether "language X is more mature than language Y": please avoid posting any opinions or reference about any specific languages because these are out of the scope of this question. EDIT To make the question more precise, by criteria I mean such things as "tool support", "adoption by the industry", "stability", "rich API", "large user community", "successful application record", "standardization", "clean and uniform semantics", and so on.

  Read the article

• Capture a Query Executed By An Application Or User Against a SQL Server Database in Less Than a Minute

  - by Compudicted

  At times a Database Administrator, or even a developer is required to wear a spy’s hat. This necessity oftentimes is dictated by a need to take a glimpse into a black-box application for reasons varying from a performance issue to an unauthorized access to data or resources, or as in my most recent case, a closed source custom application that was abandoned by a deserted contractor without source code. It may not be news or unknown to most IT people that SQL Server has always provided means of back-door access to everything connecting to its database. This indispensible tool is SQL Server Profiler. This “gem” is always quietly sitting in the Start – Programs – SQL Server <product version> – Performance Tools folder (yes, it is for performance analysis mostly, but not limited to) ready to help you! So, to the action, let’s start it up. Once ready click on the File – New Trace button, or using Ctrl-N with your keyboard. The standard connection dialog you have seen in SSMS comes up where you connect the standard way: One side note here, you will be able to connect only if your account belongs to the sysadmin or alter trace fixed server role. Upon a successful connection you must be able to see this initial dialog: At this stage I will give a hint: you will have a wide variety of predefined templates: But to shorten your time to results you would need to opt for using the TSQL_Grouped template. Now you need to set it up. In some cases, you will know the principal’s login name (account) that needs to be monitored in advance, and in some (like in mine), you will not. But it is VERY helpful to monitor just a particular account to minimize the amount of results returned. So if you know it you can already go to the Event Section tab, then click the Column Filters button which would bring a dialog below where you key in the account being monitored without any mask (or whildcard):  If you do not know the principal name then you will need to poke around and look around for things like a config file where (typically!) the connection string is fully exposed. That was the case in my situation, an application had an app.config (XML) file with the connection string in it not encrypted: This made my endeavor very easy. So after I entered the account to monitor I clicked on Run button and also started my black-box application. Voilà, in a under a minute of time I had the SQL statement captured:

  Read the article

• Multi-Part Map Troubleshooting

  - by Michael Stephenson

  Scenario I came across a nice little one with multi-part maps the other day. I had an orchestration where I needed to combine 4 input messages into one output message like in the below table:   Input Messages Output Messages Company Details Member Details Event Message Member Search Member Import   I thought my orchestration was working fine but for some reason when I was trying to send my message it had no content under the root node like below <ns0:ImportMemberChange xmlns:ns0="http://---------------/"></ns0:ImportMemberChange>   My map is displayed in the below picture. I knew that the member search message may not have any elements under it but its root element would always exist. The rest of the messages were expected to be fully populated. I tried a number of different things and testing my map outside of the orchestration it always worked fine. The Eureka Moment The eureka moment came when I was looking at the xslt produced by the map. Even though I'd tried swapping the order of the messages in the input of the map you can see in the below picture that the first part of the processing of the message (with the red circle around it) is doing a for-each over the GetCompanyDetailsResult element within the GetCompanyDetailsResponse message. This is because the processing is driven by the output message format and the first element to output is the OrganisationID which comes from the GetCompanyDetailsResponse message. At this point I could focus my attention on this message as the xslt shows that if this xpath statement doesn’t return the an element from the GetCompanyDetailsResponse message then the whole body of the output message will not be produced and the output from the map would look like the message I was getting. <ns0:ImportMemberChange xmlns:ns0="http://---------------/"></ns0:ImportMemberChange> I was quickly able to prove this in my map test which proved this was a likely candidate for the problem. I revisited the orchestration focusing on the creation of the GetCompanyDetailsResponse message and there was actually a bug in the orchestration which resulted in the message being incorrectly created, once this was fixed everything worked as expected. Conclusion Originally I thought it was a problem with the map itself, and looking online there wasn’t really much in the way of content around troubleshooting for multi-part map problems so I thought I'd write this up. I guess technically it isn't a multi-part map problem, but I spend a good couple of hours the other day thinking it was.

  Read the article

• List of common pages to have in the footer [closed]

  - by user359650

  I would like to post this question as a reference for webmasters wondering what pages they should include in the footer. I will use answers to complete my initial list: About us / About MyCompany / MyCompany About / About us: description about the company, its mission, and its vision. History: summary of milestones achieved by the company. The team / Management / Board of directors: depending on size of the company there may be one of more pages describing the people involved in the company, depending on their position. Awards: list of awards received by the company if any. In the press / They're talking about us: list of links to external websites, usually highly regarded news websites, which mentioned the company in one of their articles. Media Wallpapers: wallpapers with company logo in different colors and formats that fans can set as desktop image for their computer. logos: company logo in different colors and formats that websites/blogs posting about the website can use for illustration purposes. Media kits: documents, usually in PDF format summarizing the key company figures and facts that journalists can download and read to get a quick overview of the company. Misc Contact / Contact us: contact details the company is prepared to disclose if any (address, email, phone) or contact form. Careers / Jobs / Join us: list of open vacancies with contact form to apply. Investors / Partners / Publishers: information and contact forms for companies willing to become Investors/Partners/Publishers or login page to access portal restricted to those who already are. FAQ: list of common questions and answers to guide users and reduce number of support requests. Follow us / Community Facebook / Twitter / Google+: links to the company's pages/accounts on various social networks. Legal Terms / Terms of use / Terms & Conditions: rules users must follow when browsing the website. Privacy / Privacy Statement: explanations as to how the company deals with users' personal data and what users can do about it (request information to be deleted...). cookies: page that starts appearing on more and more websites due to new regulation (notably EU) imposing more transparency and control for users about cookies (e.g. BBC cookie page). Any input is welcome PS: if someone with enough rep could add the footer tag that would be great (min. 300 required).

  Read the article

• Hierachies....from the Top Down

  - by Joe G

  I've been struggling with how to write on the topic of the importance of hierarchy design.  It's not so much that hierarchies haven't always been important, it's more of that with Fusion, the timing of when the hierarchies are designed should take a higher priority.    I will attempt to explain..... When I was implementing applications, back in the day, we had the list of detailed account values to enter with the obvious parent accounts. Then, after the setup was complete and things were functioning, the reporting phase started.  Users explained the elements that they want on the reports, what totals should be included, and how things should be compared.  Frequently, there was at least one calculation that became a nightmare either because it was based on very specific things that didn't relate to anything else or because it was "hardcoded" so that when something changed, someone need to "fix" the report. With Fusion, the process changes slightly.  You still want to enter all of the detailed accounts, but before you start adding parent values, you should investigate the reporting requirements from the top-down.  It's better to build hierarchies based on the reporting requirements than it is to build reports based on random hierarchies. Build reports based on hierarchies that resemble the reports themselves, and maintain the hierarchies without rework of the reports. For example, if you look at an income statement, you may have line items for Material Costs, Employee Costs, Travel & Entertainment, and Total Operating Expenses.  In your hierarchy, you have detail values that roll up to Material Costs, Employee Costs, and Travel & Entertainment which roll up to Total Operating Expenses. Balances are stored automatically in the cube for each of these.  When you define the report, you pick each of these members - no calculations required.  If a new detail value is added, you simply add it to the hierarchy, and there is no need to modify the report. I realize that there are always exceptions that require special handling, but I am confident that you will end up with much fewer exceptions if you make reporting a priority and design your hierarchies from the top-down.

  Read the article

• HOW TO: Change Internet Expenses Cost Center Prompt

  - by rveliche

  The cost center segment on the General Information page in Oracle Internet Expenses derives its label from the Prompt entered on the KFF setup. Changing this is not possible with the simple personalization, the details below provide the instructions to change the Prompt. Create a custom class, I call it CustomHeaderKffCO.java in the package oracle.apps.ap.oie.entry.header.webui  (or any other). This class will have to extend from oracle.apps.ap.oie.entry.header.webui.HeaderKffCO. Add the following logic to your custom class. package oracle.apps.ap.oie.entry.header.webui; import oracle.apps.fnd.framework.webui.OAPageContext; import oracle.apps.fnd.framework.webui.beans.OAWebBean; import oracle.apps.fnd.framework.webui.beans.message.OAMessageLayoutBean; import oracle.apps.fnd.framework.webui.OAControllerImpl; public class CustomHeaderKffCO extends HeaderKffCO {   public void processRequest(OAPageContext pageContext, OAWebBean webBean)   {      super.processRequest(pageContext, webBean);     OAMessageLayoutBean layoutBean = (OAMessageLayoutBean) webBean.findChildRecursive("KffSEGMENT2MessageLayout");    if(layoutBean != null)   {     // You should use messages/lookups to avoid translation issues.     layoutBean.setLabel("Cost Center");   }   } } KffSEGMENT2MessageLayout is for illustration only, my Chart Of Accounts has SEGMENT2 as the cost center segment. Please change this to a segment being used eg.Segment6 should be KFFSEGMENT6MessageLayout Note that super.processRequest(pageContext, webBean); is a must and should always be the first statement. Once the class is compiled, copy the class to an appropriate directory, in my case I used $JAVA_TOP/oracle/apps/ap/oie/entry/header/webui. Navigate to the General Information page, click on "Personalize General Information Page".Click on Personalize icon next to Message Component Layout: (OIEGeneralInformationMsgCLayout)In the controller class section update the new controller at the appropriate levelIf the Link "Personalize General Information Page" is not visible on your instance, check your personalization profiles.

  Read the article

• How to use multiple search keys?

  - by user32565

  I have a database wherein the files are named abcd100.00b, abcd101.00b, etc. I need a code where when the user enters abcd separate then 100 to 110, all the files with the name abcd and in the range 100 to 110 should get displayed now the following code can display only the first four characters. How do I implement this? <?php //capture search term and remove spaces at its both ends if the is any $searchTerm = trim($_GET['keyname']) ; //check whether the name parsed is empty if($searchTerm == "rinex_file") { echo "Enter name you are searching for."; exit(); } if($searchTerm == "rinex_file") { echo "Enter name you are searching for."; exit(); } //database connection info $host = "localhost"; //server $db = "rinex"; //database name $user = "m"; //dabases user name $pwd = "c"; //password //connecting to server and creating link to database $link = mysqli_connect($host, $user, $pwd, $db); //MYSQL search statement $query = "SELECT * FROM rinexo WHERE rinex_file LIKE '%$searchTerm%'"; $results = mysqli_query($link, $query) ; /* check whethere there were matching records in the table by counting the number of results returned */ if(mysqli_num_rows($results) >= 1){ echo '<table border="1"> <tr> <th>rinex version</th> <th>program</th> <th>date</th> <th>maker name</th> <th>maker number</th> <th>observer</th> <th>agency</th> <th>position_X_Y_Z</th> </tr>'; while($row = mysqli_fetch_array($results)){ echo '<tr> <td>'.$row['rinex_version'].'</td> <td>'.$row['pgm'].'</td> <td>'.$row['date'].'</td> <td>'.$row['marker_name'].'</td> <td>'.$row['marker_no'].'</td> <td>'.$row['observer'].'</td> <td>'.$row['agency'].'</td> <td>'.$row['position_X_Y_Z'].'</td> </tr>'; } echo '</table>'; }else{ echo "There was no matching record for the name " . $searchTerm; }

  Read the article

• Unintentional run-in with C# thread concurrency

  - by geekrutherford

  For the first time today we began conducting load testing on a ASP.NET application already in production. Obviously you would normally want to load test prior to releasing to a production environment, but that isn't the point here.   We ran a test which simulated 5 users hitting the application doing the same actions simultaneously. The first few pages visited seemed fine and then things just hung for a while before the test failed. While the test was running I was viewing the performance counters on the server noting that the CPU was consistently pegged at 100% until the testing tool gave up.   Fortunately the application logs all exceptions including those unhandled to the database (thanks to log4net). I checked the log and low and behold the error was:   System.ArgumentException: An item with the same key has already been added. (The rest of the stack trace intentionally omitted)   Since the code was running with debug on the line number where the exception occured was also provided. I began inspecting the code and almost immediately it hit me, the section of code responsible for the exception is trying to initialize a static class. My next question was how is this code being hit multiple times when I have a rudimentary check already in place to prevent this kind of thing (i.e. a check on a public variable of the static class before entering the initializing routine). The answer...the check fails because the value is not set before other threads have already made it through.   Not being one who consistently works with threading I wasn't quite sure how to handle this problem. Fortunately a co-worker recalled having to lock a section of code in the past but couldn't recall exactly how. After a quick search on Google the solution is as follows:   Object objLock = new Object(); lock(objLock) { //logic requiring lock }   The lock statement takes an object and tells the .NET runtime that the current thread has exclusive access while the code within brackets is executing. Once the code completes, the lock is released for another thread to utilize.   In my case, I only need to execute the inner code once to initialize my static class. So within the brackets I have a check on a public variable to prevent it from being initialized again.

  Read the article

• Is this a pattern? Should it be?

  - by Arkadiy

  The following is more of a statement than a question - it describes something that may be a pattern. The question is: is this a known pattern? Or, if it's not, should it be? I've had a situation where I had to iterate over two dissimilar multi-layer data structures and copy information from one to the other. Depending on particular use case, I had around eight different kinds of layers, combined in about eight different combinations: A-B-C B-C A-C D-E A-D-E and so on After a few unsuccessful attempts to factor out the repetition of per-layer iteration code, I realized that the key difficulty in this refactoring was the fact that the bottom level needed access to data gathered at higher levels. To explicitly accommodate this requirement, I introduced IterationContext class with a number of get() and set() methods for accumulating the necessary information. In the end, I had the following class structure: class Iterator { virtual void iterateOver(const Structure &dataStructure1, IterationContext &ctx) const = 0; }; class RecursingIterator : public Iterator { RecursingIterator(const Iterator &below); }; class IterateOverA : public RecursingIterator { virtual void iterateOver(const Structure &dataStructure1, IterationContext &ctx) const { // Iterate over members in dataStructure1 // locate corresponding item in dataStructure2 (passed via context) // and set it in the context // invoke the sub-iterator }; class IterateOverB : public RecursingIterator { virtual void iterateOver(const Structure &dataStructure1, IterationContext &ctx) const { // iterate over members dataStructure2 (form context) // set dataStructure2's item in the context // locate corresponding item in dataStructure2 (passed via context) // invoke the sub-iterator }; void main() { class FinalCopy : public Iterator { virtual void iterateOver(const Structure &dataStructure1, IterationContext &ctx) const { // copy data from structure 1 to structure 2 in the context, // using some data from higher levels as needed } } IterationContext ctx(dateStructure2); IterateOverA(IterateOverB(FinalCopy())).iterate(dataStructure1, ctx); } It so happens that dataStructure1 is a uniform data structure, similar to XML DOM in that respect, while dataStructure2 is a legacy data structure made of various structs and arrays. This allows me to pass dataStructure1 outside of the context for convenience. In general, either side of the iteration or both sides may be passed via context, as convenient. The key situation points are: complicated code that needs to be invoked in "layers", with multiple combinations of layer types possible at the bottom layer, the information from top layers needs to be visible. The key implementation points are: use of context class to access the data from all levels of iteration complicated iteration code encapsulated in implementation of pure virtual function two interfaces - one aware of underlying iterator, one not aware of it. use of const & to simplify the usage syntax.

  Read the article

• Nails vs Screws (C# List vs Dictionary)

  - by MarkPearl

  General This may sound like a typical noob statement, but I’m finding out in a very real way that just because you have a solution to a problem, doesn’t necessarily mean it is the best solution. This was reiterated to me when a friend of mine suggested I look at using Dictionaries instead of Lists for a particular problem – he was right, I have always just assumed that because lists solved my problem I did not need to look elsewhere. So my new manifesto to counter this ageless problem is as follows… Look for a solution that will logically work Once you have a solution look for possible alternatives Decide why your current solution is the best approach compared to the alternatives If it is.. use it till something better comes along, if it isnt…. change What’s the difference between Lists & Dictionaries Both lists and dictionaries are used to store collections of data. Assume we had the following declarations… var dic = new Dictionary<string, long>(); var lst = new List<long>(); long data;   With a list, you simply add the item to the list and it will add the item to the end of the list. lst.Add(data); With a dictionary, you need to specify some sort of key and the data you want to add so that it can be uniquely identified. dic.Add(uniquekey, data);   Because with a dictionary you now have unique identifier, in the background they provide all sort’s of optimized algorithms to find your associated data. What this means is that if you are wanting to access your data it is a lot faster than a List. So when is it appropriate to use either class? For me, if I can guarantee that each item in my collection will have a unique identifier, then I will use Dictionaries instead of Lists as there is a considerable performance benefit when accessing each data item. If I cannot make this sort of guarantee, then by default I will use a list. I know this is all really basic, and I hope I haven’t missed some fundamental principle… If anyone would like to add their 2 cents, please feel free to do so…

  Read the article

• SharePoint 2010 HierarchicalConfig Caching Problem

  - by Damon

  We've started using the Application Foundations for SharePoint 2010 in some of our projects at work, and I came across a nasty issue with the hierarchical configuration settings.  I have some settings that I am storing at the Farm level, and as I was testing my code it seemed like the settings were not being saved - at least that is what it appeared was the case at first.  However, I happened to reset IIS and the settings suddenly appeared.  Immediately, I figured that it must be a caching issue and dug into the code base.  I found that there was a 10 second caching mechanism in the SPFarmPropertyBag and the SPWebAppPropertyBag classes.  So I ran another test where I waited 10 seconds to make sure that enough time had passed to force the caching mechanism to reset the data.  After 10 minutes the cache had still not cleared.  After digging a bit further, I found a double lock check that looked a bit off in the GetSettingsStore() method of the SPFarmPropertyBag class: if (_settingStore == null || (DateTime.Now.Subtract(lastLoad).TotalSeconds) > cacheInterval)) { //Need to exist so don't deadlock. rrLock.EnterWriteLock(); try { //make sure first another thread didn't already load... if (_settingStore == null) { _settingStore = WebAppSettingStore.Load(this.webApplication); lastLoad = DateTime.Now; } } finally { rrLock.ExitWriteLock(); } } What ends up happening here is the outer check determines if the _settingStore is null or the cache has expired, but the inner check is just checking if the _settingStore is null (which is never the case after the first time it's been loaded).  Ergo, the cached settings are never reset.  The fix is really easy, just add the cache checking back into the inner if statement. //make sure first another thread didn't already load... if (_settingStore == null || (DateTime.Now.Subtract(lastLoad).TotalSeconds) > cacheInterval) { _settingStore = WebAppSettingStore.Load(this.webApplication); lastLoad = DateTime.Now; } And then it starts working just fine. as long as you wait at least 10 seconds for the cache to clear.

  Read the article

• Registering domain during Christmas holidays

  - by arkascha

  One of the domain names I tried to register previously has been blocked by a domain grabber two days prior to my own attempt. That was about 1 year ago. The attempt to buy the domain from that person failed due to a totally exaggerated price. So I dropped the issue and watched the domain (offered at sedo.com). As expected there were no more offers, the domain was not sold. Now I learn from the whois database that the registration of that domain name ends on 25 Dec 2012 (Christmas holiday). This raises two questions for me, I fail to find reliable answers on the internet. So maybe someone experienced here can drop a statement or a hint: Is it reasonable that the domain name in question really will be free again when that date mentioned in the whois database up to when the domain is registered has passed? I certainly know that the registration can be prolonged, that is not what I mean. I expect (hope) that that domain grabber does not extend the registration, since it costs money and effort and he failed to sell the domain. Provided this is the case and the domain registration is not prolonged, is that date mentioned reliable? Or might it just be some 'default' date? I would like to try to register that domain name as soon as it is unregistered. Since that domain grabber registered that domain only two days before my own registration attempt I would like to prevent such annoying interference next time. So I ask myself: is it possible to register a domain name on a holiday? I mean not to send an email to my provider to do so on that day or before, but to actually have to process taking place as not to wait for 1-2 days after the unregistration? My own provider which I am very happy with does not offer such service on a holiday (which is perfectly understandable). They are 'still checking' if they can offer something automatic. I researched and did not find an answer to the question if that is possible at all. Is an automatic registration attempt on a holiday possible? Where can I do that? Is that reliable?

  Read the article

• [EF + Oracle] Inserting Data (1/2)

  - by JTorrecilla

  Prologue Following EF series (I ,II y III) in this chapter we will see how to create DB record from EF. Inserting Data Like we indicated in the 2º post: “One Entity matches with a DB record, and one property match with a Table Column”. To start, we need to create an object from one of the Entities: 1: EMPLEADOS empleado = new EMPLEADOS(); Also like, I told previously, Exists the possibility to use the Static Function defined by VS for each Entity: Once we have created the object, we can Access to it properties to fill like a common class:   1: empleado.NOMBRE = "Javier Torrecilla";   After finish of fill our Entity properties, it must be needed to add the object to the appropriate ObjectSet in the ObjectContext: 1: enti.EMPLEADOS.AddObject(empleado); or 1: enti.AddToEMPLEADOS(empleado); Both methods will do the same action, create an insert statement. Have we finished? No. Any Entity has a property called “EntityState”. This prop is an Enum from “EntityState”, which has the following: Detached: the Entity is created, but not added to the Context. Unchanged: There is no pending changes in the Entity. Added: The entity is added to the ObjectSet, but it is not yet sent to the DB. Deleted: The object is deleted form the ObjectSet, but not yet from the DB. Modified: There is Pending Changes to confirm. Let’s see, the several values of the property during the Creation steps: 1. While the Object is created and we are filling the props: EntityState.Detached; 2. After adding to the ObjectSet: EntityState.Added. This not indicated that the record is in the DB 3. Saving the Data: To sabe the data in the DB, we are going to call “SaveChanges” method of the Object Context. After invoke it, the property will be EntityState.Unchanged.   What does SaveChanges Method? This function will synchronize and send all pending changes to DB. It will add, modify or delete all Entities, whose EntityState property, is setted to Added, Deleted or Modified. After finishing, all added or modified entities will be change the State to “Unchanged”, and deleted Entities must take the “Detached” state.

  Read the article

• I have a performance problem

  - by Alan

  (copied from my wordpress blog). So start 95% of the performance calls that I receive. They usually continue something like: I have gathered some *stat data for you (eg the guds tool from Document 1285485.1), can you please root cause our problem? So, do you think you could? Neither can I, based on this my answer inevitably has to be "No". Given this kind of problem statement, I have no idea about the expectations, the boundary conditions, or even the application. The answer may as well be "Performance problems? Consult your local Doctor for Viagra". It's really not a lot to go on. So, What kind of problem description is going to allow me to start work on the issue that is being seen? I don't doubt that there really is an issue, it just needs to be pinned down somewhat. What behavior exactly are you expecting to see? Be specific and use business metrics. For example "run-time", "response-time" and "throughput". This helps us define exit criterea. Now, let's look at the system that is having problems. How is what you are seeing different? Use the same type of metrics. The answers to these two questions take us a long way towards being able to work a call. Even more helpful are answers to questions like Has this system ever worked to expectation? If so, when did it start exhibiting this behavior? Is the problem always present, or does it sometimes work to expectation? If it sometimes works to expectation, when are you seeing the problem? Is there any discernible pattern? Is the impact of the problem getting better, worse, or remaining constant? What kind of differences are there between when the system was performing to expectation and when it is not? Are there other machines where we could expect to see the same issue (eg similar usage and load), but are not? Again, differences? Once we start to gather information like this we start to build up a much clearer picture of exactly what we need to investigate, and what we need to achieve so that both you and me agree that the problem has been solved. Please help get that figure of poorly defined problem statements down from it's current 95% value.

  Read the article

< Previous Page | 386 387 388 389 390 391 392 393 394 395 396 397  | Next Page >