Search Results

Search found 71736 results on 2870 pages for 'how to create an access d'.

Page 394/2870 | < Previous Page | 390 391 392 393 394 395 396 397 398 399 400 401  | Next Page >

• Using Solaris zfs + iscsi targets with Oracle VM

  - by wim.coekaerts

  I was playing with my Oracle VM setup and needed some shared storage that was block based. I did not have a storage array available but I did have a solaris box, that I use for Oracle VDI, available. I set up a few iscsi targets on this solaris server and exported them to my 2 Oracle VM servers. Here's how I did this : (1) On the solaris side : # zpool list NAME SIZE USED AVAIL CAP HEALTH ALTROOT rpool 544G 129G 415G 23% ONLINE - I just have a simple zpool, called rpool, on this box. It has plenty of space available for my needs. So I will use rpool and I will create 5 50gb vols : zfs create -V 50G rpool/ovm1 zfs create -V 50G rpool/ovm2 zfs create -V 50G rpool/ovm3 zfs create -V 50G rpool/ovm4 zfs create -V 50G rpool/ovm5 I want to use these volumes for iscsi so I have to enable them as shared iscsi devices : zfs set shareiscsi=on rpool/ovm1 zfs set shareiscsi=on rpool/ovm2 zfs set shareiscsi=on rpool/ovm3 zfs set shareiscsi=on rpool/ovm4 zfs set shareiscsi=on rpool/ovm5 The command iscsitadm list target should list these devices so make sure they show up. # iscsitadm list target Target: rpool/ovm1 iSCSI Name: iqn.1986-03.com.sun:02:896c766c-0943-4da5-d47e-9575b5a0be36 Connections: 2 Target: rpool/ovm2 iSCSI Name: iqn.1986-03.com.sun:02:a3116b46-73e0-e8c2-e80c-9a4f71aff069 Connections: 2 Target: rpool/ovm3 iSCSI Name: iqn.1986-03.com.sun:02:a838c400-2730-c0d6-f2c2-ee186a0261c1 Connections: 2 Target: rpool/ovm4 iSCSI Name: iqn.1986-03.com.sun:02:2e046afb-d66d-4f3f-c5de-8115e0ddd931 Connections: 2 Target: rpool/ovm5 iSCSI Name: iqn.1986-03.com.sun:02:66109fbe-81ac-ef05-f85e-ab8c1f34cb43 Connections: 2 At this point I want to make sure that I have some access control on these devices. To make it easier, I will create an alias for my 2 servers and use the alias for the ACL. get the iqn from the 2 servers on my 2 ovm servers (wcoekaer-srv1, wcoekaer-srv2) get the content of /etc/iscsi/initiatorname.iscsi (for each server) InitiatorName=iqn.1986-03.com.sun:01:2a7526f0ffff On the solaris side create the aliases : iscsitadm create initiator -n iqn.1986-03.com.sun:01:2a7526f0ffff wcoekaer-srv1 iscsitadm create initiator -n iqn.1986-03.com.sun:01:e31b08110f1 wcoekaer-srv5 Add the ACL to the targets : iscsitadm modify target -l wcoekaer-srv1 rpool/ovm1 iscsitadm modify target -l wcoekaer-srv1 rpool/ovm2 iscsitadm modify target -l wcoekaer-srv1 rpool/ovm3 iscsitadm modify target -l wcoekaer-srv1 rpool/ovm4 iscsitadm modify target -l wcoekaer-srv1 rpool/ovm5 iscsitadm modify target -l wcoekaer-srv5 rpool/ovm1 iscsitadm modify target -l wcoekaer-srv5 rpool/ovm2 iscsitadm modify target -l wcoekaer-srv5 rpool/ovm3 iscsitadm modify target -l wcoekaer-srv5 rpool/ovm4 iscsitadm modify target -l wcoekaer-srv5 rpool/ovm5 (2) the Oracle VM side On each server just do 2 simple things : # iscsiadm -m discovery -t sendtargets -p ca-vdi1 where ca-vdi1 is my solaris server name # service iscsi restart When I do cat /proc/partitions on my servers I will see the devices show up # cat /proc/partitions major minor #blocks name 8 0 160836480 sda 8 1 104391 sda1 8 2 3148740 sda2 8 3 1052257 sda3 253 0 6377804 dm-0 253 1 6377804 dm-1 253 2 6377804 dm-2 8 16 52428800 sdb 8 32 52428800 sdc 8 48 52428800 sdd 8 80 52428800 sdf 8 64 52428800 sde These 5 new devices sd[b..f] are shared storage for Oracle VM and can be used to pass through to the VM's as phy: devices or put ocfs2 on it and use as shared filesystem storage for dom0 repositories. I am setting up an 11gR2 rac template (the cool stuff Saar did) so I am using my devices to create a 2 node RAC cluster with phy: devices.

  Read the article

• IIS7Register failed with HRESULT 800700b7: 'Cannot create a file when that file already exists.'

  - by Optimax

  I am trying to re-install ASP.NET on IIS7 running in Win7/64, which magically stopped working all of as sudden. When I run aspnet_regiis -i, I get an error message that says Finished installing ASP.NET (4.0.30319). Setup has detected some errors during the operation. For details, please read the setup log file C:\Users\username\AppData\Local\Temp\ASPNETSetup_00031.log Looking at the log, it reports Failure Changing IIS ApplicationHost.config: IIS7Register failed with HRESULT 800700b7: 'Cannot create a file when that file already exists. ' The real problem surfaces when trying to access an ASP.NET web page from that server: HTTP Error 500.21 - Internal Server Error Handler "PageHandlerFactory-Integrated" has a bad module "ManagedPipelineHandler" in its module list and Most likely causes: Managed handler is used; however, ASP.NET is not installed or is not installed completely. There is a typographical error in the configuration for the handler module list. So it seems ASP.NET has NOT been properly re-installed. Now, I am aware of the alleged one-and-only remedy for this, repeated all over the Web, and referenced for example here: http://blogs.msdn.com/b/dougste/archive/2010/09/06/errors-installing-asp-net-4-0.aspx Except that the proposed solution does not work for me. I have expanded the %windir% macros within isapiCgiRestriction section for .NET 4.0 - and aspnet_regiis still fails for me. Any other ideas?

  Read the article

• ClearOS - how to create a site to site VPN between two ClearOS boxes?

  - by Scott Szretter

  I plan on setting up some ClearOS boxes at several sites, and would like to set up site-to-site VPN between the remote sites and a main site (all running ClearOS enterprise 5.2sp1 / latest version). I have found references for how to set up ClearOS to VPN in to devices such as cisco for IPSEC, and others with PPTP. But for these methods it did not mention how you might configure 2 ClearOS boxes to talk to each other ipsec or pptp. I also saw documentation on installing OpenVPN and using the OpenVPN client software to VPN in to the ClearOS box. I will probably use this for individual users to VPN in, but I have some small sites ( 1 to 10 users) that will have their own ClearOS box and need to create a site to site VPN link back to the main site's OpenVPN box. Is this possible, can you point me to docs, or other info or basically, how? A couple updates: I did find a thread that asks the same basic question, where the user has a vpn set up between the two clearos machines (after installing ipsec vpn modules), just not transporting traffic between the LANS - and the very last post claims you have to edit some files (/etc/ipsec.conf) and set leftnexthop rightnexthop values to %direct. After that, it's supposed to work. Could it be that simple? I also posted to clear foundation, and they pointed me to some documentation for setting up ipsec unmanaged vpn. This looks pretty good, but, I will most likely need to figure out how to handle a dynamic dns type setup at least on one end. Also, what does it mean by multi-wan? Finally, what happens when a vpn connection goes down exactly - someone has to reboot the box or ?

  Read the article

• Can't access IIS 7 server URL from the same IIS 7 server.

  - by Kevin Raffay

  We have an intranet site ie, xxx.yyyy.com, that users access by entering "http"://xxx.yyy.com. Our problems started when we migrated to IIS 7 running on a new 2003 server. We got rid of our single-sign on code and implemented a security model where we capture a user's domain credentials which we then authenticate against a DB. In order to get the domain credentials passed to our ASP.NET app, we have the following settings: Anonymous Authentication:Disabled ASP.NET Impersonation: Enabled Basic/Digest/Forms Authentication: Disabled Windows Authentication: Enabled We allow "*" and deny "?" in the web.config. Browsing "http"://xxx.yyy.com from any client PC results in a domain login prompt, and if your enter a proper user/pwd, you can get in. However, browsing "http"://xxx.yyy.com while remoting into the server results in 3 domain login prompts and eventually a 401 error - unauthorized. We have traced this behavior to problems with our web site where we have pages doing "screen scraping" using the HttpRequest calling a url on the same server. When doing a HttpRequest from any other client, using a test harness that passes authorized credentials, all is good. So internal HttpRequest calls on the server fail, just like attempts to browse that server's url from within a remote session. Why would a to "http"://xxx.yyy.com on server xxx.yyy.com fail authentication?

  Read the article

• How can I access a webDAV folder as a UNC share?

  - by Amar

  first of all I am just getting to know about webDAV and appreciate your patience. I have a virtual directory on IIS 6 (windows 2003) that is based on a network share on a file server different from web server. something like www.mysite.com/myreports where myreport is based on \myfileserver\reports. I have been asked by network folks to not use the UNC path like that for security reason and try to explore using webDAV. What I have been told is webDAV can give me a UNC path without requiring to open the ports required for a file server UNC path. Then I can use the new UNC path to map my virtual directory and my asp.net code will not require any change. Help: Being new to webDAV, I did some research over the web. I now can create a web folder in fileserver. I put IIS on file server as well. I can browse the content as http:://fileserver/mywebDAVreports which is based on reports folder. But I don't know how to get a UNC for this web folder to be able to map my virtual directory on web server. I appreciate any help on this. Regards, Amar

  Read the article

• Black screen appears when booting new install of Ubuntu 11.10 on my desktop, cannot access Grub menu to fix

  - by izn

  I installed 11.10 on my desktop PC but get a black screen after the BIOS screen when I try to boot it. I was able to run 10.04.04 on my hard drive before installing 11.10 and I am also able to use 11.10 on my usb pendrive and CD ROM. I've tried unplugging all USB devices before booting and also upgrading from 11.10 to 11.10. Holding the shift key from the BIOS screen doesn't allow me to access the GRUB menu to try: Highlight the first entry, press “e” to edit it. Navigate to words “quiet splash”, delete them and type “nomodeset” in their place (without quotes). Press Ctrl + X to continue boot. Once on the desktop, go to System Administration Additional Drivers and activate the recommended drivers. So running 11.10 on my pendrive, I tried editing /etc/default/grub, commenting out the GRUB_HIDDEN_TIMEOUT setting by putting a '#' in front of it to display the grub menu and setting GRUB_TIMEOUT setting to a value greater than or equal to 1 e.g. GRUB_TIMEOUT=10. However, when I run sudo update-grub, I get: /usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?) I get the same error with update-grub after: sudo mount /dev/sda1 /mnt and after: sudo grub-install --root-directory=/mnt /dev/sda reboot sudo update-grub Other suggestions to fix the update-grub problem: Open synaptic, then purge all the related grub installed packages and reinstall grub-pc then and finally: sudo update-grub Or use Grub Customizer http://ubuntuforums.org/showthread.php?t=1195275 What would be the best way to approach this? I'm concerned about purging "all the related grub installed packages" but if it's true some files are corrupted this would seem necessary. Also, was I executing the correct commands i.e. with mount and grub-install, before running grub-update?

  Read the article

• Why can I not access the internet when Windows 7 finds no issue with the ethernet connection and the network can see my device?

  - by WannabeCoder

  So I just moved from a house to an apartment. In the house and the apartment I had Uverse set up - and in both I had my desktop connected via a ~40 foot long cat5 cable. However, upon moving to the apartment I found that my ethernet connection no longer provides internet. This would seem like a mundane problem if not for: The router can see the computer on the network Windows 7 (the desktop's OS) detects no problems with the ethernet connection. Connections over the internet (i.e. browser windows, Pandora, etc.) do not immediately fail. Instead they load for 2 minutes and then finally give up. Devices connected over the Wifi (PS4, Laptop) access the internet just fine While removing the cat5 cable from my house, I accidentally damaged the locking tab but managed to bend it back into the appropriate position. I would suspect that a bad cat5 cable might be to blame if not for the above issues (thought I've heard bad cat5 cables cause the most nonsensical problems) and the fact that I tested the cat5 cable by having it share internet between my laptop (working internet) to my desktop and it functioned just fine and provided the desktop with internet. My ipconfig /all successfully finds a default gateway, DHCP server, and DNS server. What could possibly be causing the problem?

  Read the article

• Cannot access SMC8014WG-SI provided by TimeWarner/RoadRunner administrative interface...

  - by Matt Rogish

  I just received installation of RoadRunner internet/TV/Voice and I was given a wi-fi router from the TimeWarner folks. The model is a SMC SMC8014WG-SI. Unfortunately, the password it uses is WEP and that is, as we all know, completely insecure. The tech that was here didn't know how to change it to something like WPA2 w/TKIP, and I was on hold for 20 minutes with the TimeWarner folks before I gave up. My problem is that the default web interface (http://192.168.0.1) isn't responding. I can ping it, I can access the internet through it, but I can't get to the admin interface. I did a "hard reset" of the device but still no dice. My suspicion is that the wi-fi admin interface is disabled (a common setting) but the wired interface isn't working on either of my two laptops (I've tried two laptops with two different cables, no link light activated). Am I SOL? Did they lock this down so I can't do what I want to do? Worst-case is I just hook up my go-to WRT54G router to the other modem and leave this one turned off, but I'd rather use their hardware to avoid any "It's not our problem" in the future. Any thoughts? Thanks!!

  Read the article

• How to create an MST for silent install using Orca?

  - by Sanarothe

  Hi. I'm trying to deploy 7zip via GPO; I assigned the original MSI, but the package installation simply doesn't take place. What I've gathered is that I need to create an MST. In the spirit of trying to learn as much as possible about it, I've opted to use Orca rather than a third-party automagic tool, but I'm at a loss as to which fields to edit. So far the only change that I've made is to give the license accepted checkbox a value of "1" instead of pointing to another key that, still, just gave it a value of "1." So, to give this some structure, How does (Or what criteria should I consider) creating a MST make the install noninteractive/silent? Do you have to manually reconfigure the MSI to simply not perform the GUI aspects? Or do I have to execute the program in silent mode after defining the variables the the installer requests? (Though, of course, it seems that would defeat the purpose of the MST) How do I determine which fields I need to edit? I've loaded the installer and it takes three inputs: License acceptance, feature set and installation location. I want all of the default values: I'm just trying to deploy it at all, not customize the installation. I BELIEVE that I should be messing with some values in the Registry table, but I really don't know. If I'm not asking the right questions, can someone point me to a THOROUGH resource or documentation for this process? I've already gone over the technet articles on basic Orca use and deployment, but I couldn't really find anything on creating MST that didn't involve a third party program in which one runs a 'dummy' installer to get the before and after snapshots. Thank you very much, Cameron UPDATE: After spending the day troubleshooting, I finally got my server to send out 7zip, but not until I had also assigned firefox. Not sure why it didn't want to send out 7zip by itself, but I also had some domain naming problems. Thanks for the input (GPResult helped enormously.)

  Read the article

• Looking for software to create a personal hotspot on Mac OS X (not using the built-in ability)

  - by Fred

  I got my nifty little MacBook Air today. Since I will be going on travel I was hoping to use my iPad 3G as screen extension with Air Display. It works being in a shared WiFi network. Sadly Apple is a bit restrictive on the tethering with their mobile devices such as the iPad. Now I read iOS 4.3 will enable the iPad to use tethered networks. But the feature will not be working for iPad 3G. I assume their big partner telecom companies fear everyone will quit their internet contract with them. So I want to create a personal hotspot on my MacBook and use it on my iPad. But the iPad is not able to use this network. The network is visible but not usable. On Windows there is this connectify program which lets the PC act as wireless router. Does anybody know a similar program for Mac which would turn it into a wireless router? Or is there something I don't see with Mac OS X's builtin features?

  Read the article

• How do I create a VBA macro that will copy data from an entry sheet, into a summary sheet by date

  - by Mukkman

  I'm trying to create a macro that will copy data from a data entry sheet into a summary sheet. The entry sheet is going to be cleared daily so I can't use a formula just to reference it. I want the user to be able to enter a date, run a macro, and have the macro copy the data from the entry sheet into the cells for the corresponding date on the summary sheet. I've looked around and found bits and pieces of how to do this but I can't put it all together. Update: Thanks to the information below I was able to find some additional data. I have a pretty crude macro that works if the user manually selects the correct cell. Now I just need to figure out how to automatically select the current cell relative to the current date. Sub Update_Deposits() ' ' Update_Deposits Macro ' Dim selectedDate As String Dim rangeFound As Range selectedDate = Sheets("Summary Sheet").Range("F3") Set rangeFound = Sheets("Deposits").Cells.Find(CDate(selectedDate)) Dim Total1 As Double Dim Total2 As Double Dim Total3 As Double Dim Total4 As Double Dim Total5 As Double Total1 = Sheets("Summary Sheet").Range("E6") Total2 = Sheets("Summary Sheet").Range("E7") Total3 = Sheets("Summary Sheet").Range("E8") Total4 = Sheets("Summary Sheet").Range("E9") Total5 = Sheets("Summary Sheet").Range("E10") If Not (rangeFound Is Nothing) Then rangeFound.Offset(0, 2) = Total1 rangeFound.Offset(0, 3) = Total2 rangeFound.Offset(0, 4) = Total3 rangeFound.Offset(0, 6) = Total4 rangeFound.Offset(0, 7) = Total5 End If ' End Sub This version will find the first value on the page and fill in values: Sub Update_Deposits() ' ' Update_Deposits Macro ' Dim selectedDate As String Dim rangeFound As Range selectedDate = Sheets("Summary Sheet").Range("F3") Set rangeFound = Sheets("Deposits").Cells.Find(CDate(selectedDate)) Dim Total1 As Double Dim Total2 As Double Dim Total3 As Double Dim Total4 As Double Dim Total5 As Double Total1 = Sheets("Summary Sheet").Range("E6") Total2 = Sheets("Summary Sheet").Range("E7") Total3 = Sheets("Summary Sheet").Range("E8") Total4 = Sheets("Summary Sheet").Range("E9") Total5 = Sheets("Summary Sheet").Range("E10") If Not (rangeFound Is Nothing) Then rangeFound.Offset(0, 2) = Total1 rangeFound.Offset(0, 3) = Total2 rangeFound.Offset(0, 4) = Total3 rangeFound.Offset(0, 6) = Total4 rangeFound.Offset(0, 7) = Total5 End If ' End Sub

  Read the article

• How use DNS server to create simple HA (High availability) of my website?

  - by marc22

  Welcome, How can i use DNS server to create simple HA (High availability) of website ? For example if my web-server ( for better understanding i use internal IP in real it will be other hosting companies) 192.168.0.120 :80 (is offline) traffic go to 192.168.0.130 :80 You have right, i use bad word "hight avability" of course i was thinking about failover. Using few IP in A records is good for simple load-balancing. But not in case, if i want notice user about failure (for example display page, Oops something is wrong without our server, we working on it) against "can't establish connection". I was thinking about setting up something like this 2 DNS servers, one installed on www server Both have low TTL on my domain, set up 2 ns records first for DNS with my apache server second to other dns If user try connect he will get ip of www server using first dns, if that dns is offline (probably www server is also down) so it will try second NS record, what will point to another dns, that dns will point to "backup" page. That's what i would like to do. If You have other idea please share. Reverse proxy is not option, because IP of server can change, or i can use other country for backup.

  Read the article

• Password-protected sharing allows access to users who have no account?

  - by romkyns

  Running Win7 on two computers in my LAN. Computer A has password-protected sharing enabled, and shares a folder. It has a single user account "Bob", and the Guest account is turned off. The network is workgroup-based. According to the descriptions of the "password-protected sharing" I could find, the only people who can access the shared folder via the LAN are those who know the username+password for the "Bob" account. However a second computer on the LAN is able to view this shared folder by simply browsing to Computer A. They don't need to enter any passwords or anything. The only user account registered on that PC is called "Jim", and has a different password from "Bob". How on earth is computer B able to view this shared folder? Is the popular description of the "password-protected sharing" feature inaccurate / did I misunderstand it big time? P.S. There is a possibility that the password for "Bob" has been entered on that PC once, and possibly the "remember password" box was checked. I've looked in the "Credential Manager" on both computers and there is nothing saved anywhere.

  Read the article

• Under which circumstances can a *local* user account access a remote SQL Server with a trusted connection?

  - by Heinzi

  One of our customers has the following configuration: On the domain controller, there's an SQL Server. On his PC (WinXP), he logs on with LocalPC\LocalUser. In Windows Explorer, he opens DomainController\SomeShare and authenticates as Domain\Administrator. He starts our application, which opens a trusted connection (Windows authentication) to the SQL Server. It works. In SSMS, the connection shows up with the user Domain\Administrator. Firstly, I was surprised that this even works. (My first suspicion was that there is a user with the same name and password in the domain, but there is no user LocalUser in the domain.) Then we tried to reproduce the same behaviour on his new PC, but failed: On his new PC (Win7), he logs on with OtherLocalPC\OtherLocalUser. In Windows Explorer, he opens DomainController\SomeShare and authenticates as Domain\Administrator. He starts our application, which opens a trusted connection (Windows authentication) to the SQL Server. It fails with the error message Login failed for user ''. The user is not associated with a trusted SQL Server connection. Hence my question: Under which conditions can a non-domain user access a remote SQL Server using Windows Authentication with different credentials? Apparently, it's possible (it works on his old PC), but why? And how can I reproduce it?

  Read the article

• How do I create a wifi network bridge with qemu on OS X?

  - by a paid nerd

  I grabbed a small FreeBSD live CD and QEMU, and I'm trying to bridge my Mac OS X 10.8 wifi connection so that the guest OS is available on my LAN. However, the guest OS never gets a DHCP lease. This works perfectly with VirtualBox in their "bridged" network mode, so I know it can be done. I need to get it working with QEMU because VirtualBox doesn't support the architecture that I need for this project. Here's what I've done so far based on hours of googling: Installed TUNTAP for OS X Told OS X to supposedly forward all packets, even ARP: (NOTE: This doesn't appear to work.) $ sudo sysctl -w net.inet.ip.forwarding=1 $ sudo sysctl -w net.link.ether.inet.proxyall=1 $ sudo sysctl -w net.inet.ip.fw.enable=1 Created a bridge: $ sudo ifconfig bridge0 create $ sudo ifconfig bridge0 addm en0 addm tap0 $ sudo ifconfig bridge0 up $ ifconfig bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether ac:de:xx:xx:xx:xx Configuration: priority 0 hellotime 0 fwddelay 0 maxage 0 ipfilter disabled flags 0x2 member: en0 flags=3<LEARNING,DISCOVER> port 4 priority 0 path cost 0 member: tap0 flags=3<LEARNING,DISCOVER> port 8 priority 0 path cost 0 tap0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether ca:3d:xx:xx:xx:xx open (pid 88244) Started tcpdump with -I in the hopes that it enables promiscuous mode on the wifi device: $ sudo tcpdump -In -i en0 Run QEMU using the bridged network instructions: $ qemu-system-x86_64 -cdrom mfsbsd-9.2-RELEASE-amd64.iso -m 1024 \ -boot d -net nic -net tap,ifname=tap0,script=no,downscript=no But the guest system never gets a DHCP lease: If I tcpdump -ni tap0, I see lots of traffic from the wireless network. But if I tcpdump -ni en0, I don't see any DHCP traffic from the QEMU guest OS. Any ideas? Update 1: I tried sudo defaults write "/Library/Preferences/SystemConfiguration/com.apple.Boot" "Kernel Flags" "net.inet.ip.scopedroute=0" and rebooting per this mailing list suggestion, but this didn't help. In fact, it made VirtualBox bridged mode stop working.

  Read the article

• Unix Permissions: Enable access to files no matter the user?

  - by TK Kocheran

  I've been using Linux for a long time and I still am completely in the dark about how file permissions really work. With that in mind, does anyone have any books or thorough guides I could read to really understand things completely? I've done my fair share of sysadminning, so I know the easy stuff like making directories readable and writable, making files executable, and changing the owner of a file, but on sharing files across users, I'm lost. Here's my main problem. I have a number of machines across which I intend to synchronize my music library. I've been using Unison for a while now and it's a great choice as I can easily run it over SSH on my local network which I just set up. Win-win. Up until this point, I've been synchronizing computers using a 2TB external hard drive. (computer 1 unisons to HD, computer 2 unisons to HD, etc.) This is tedious at best, especially since I encrypted the drive, making it a huge hassle to hook it up to all of my machines and sync it. Anyway, the drive is running ext4 (in TrueCrypt), so it maintains all Unix filesystem info like owners and groups. I just set up a new machine and just Unison'd it to get the music on it, and I realized that now, all of my permissions are fubar. I had to run Unison as root since that was the only way I could get the files to come off of the external drive. Apparently, since I'm using a different user name on this machine than my usual "rfkrocktk" across all machines, this essentially throws a huge wrench in the gears. Here's my use case. This laptop has two effective users, "leandra" and "rfkrocktk". I want to share music between these two users, so I symlinked /home/rfkrocktk/Music to point to /home/leandra/Music. How do I (a) allow both users access to read/write/delete files in this folder, and (b) keep everything nicely in sync without messing up file ownership?

  Read the article

• Why Virtual Box won't give me option to create 64 bits guests?

  - by Eduardo Born

  My host is x64 bits Windows 8.1. I downloaded the latest Virtual Box (4.3) and I'm trying to create a VM with a 64 bits Ubuntu OS (ubuntu-12.04.3-desktop-amd64). When I go to New VM wizard, it doesn't give me option to select "Ubuntu (x64)" as I have seen in other people's screenshots, only just "Ubuntu". As a result, the ISO can't boot. I tried in another PC and Virtual Box gives the x64 variants to most listed OS... Control Panel shows x64 OS, x64 processor. My host laptop is a Sony Vaio VPCZ22UGX/N, Intel® Core™ i7-2640M processor. CPUz shows Vx-t is available on my processor, of course. Here is what I tried so far: I enabled IO APIC as required in the docs. I have virtualization enabled in the BIOS. It works fine in VMware. Check that Hyper-V is not running or even installed on my Windows. Same for VMware. I also tried running the command: VBoxManage modifyvm [vmname] --longmode on for that VM, but no change.. I think the issue is really that I can't select x64 variant of the Ubuntu OS for that VM. Other people seem to indicate that's a requirement, but I don't get that option for some reason. I spent a lot of time and can't find what's wrong... Anyone knows what could be missing here? Thank you very much!! Eduardo

  Read the article

• How do I create a "here document" within a shell function?

  - by BenU

  I'm working my way through William Shotts Jr.'s great The Linux Command Line on my Mac OSX 10.7.5 system. 90% of the linux that Shotts covers is close enough to Darwin that I can figure out or GTEM to figure out what's going on. I've made it to chapter 27 on "Writing Shell Scripts" and am getting hung up creating "here files" within a function. I get an syntax error: unexpected end of file error when I include the following function: report_uptime () { cat <<- _EOF_ <H2>System Uptime</H2> <PRE>$(uptime)</PRE> _EOF_ return } The error goes away if I use the following function placeholder: report_uptime () { return } Also, elsewhere in the script, outside of a function I use the cat << _EOF_ format to create a "here file" with no trouble: cat << _EOF_ <HTML> <HEAD> <TITLE>$TITLE</TITLE> </HEAD> <BODY> <H1>$TITLE</H1> <P>$TIME_STAMP</P> $(report_uptime) $(report_disk_space) $(report_home_space) </BODY> </HTML> _EOF_ If anyone has any idea what I'm doing wrong I would be grateful!

  Read the article

• Homebrew large data cluster access for 2 user levels?

  - by Yegor

  The title probably makes little sense, so here is an example. I have a file hosting site, that serves a large amount of semi-randomly accessed files. The setup is as follows: High horsepower front-end +DB server that also does encoding for files that need encoding Fresh file server, which stores newly uploaded content, thats probably (and usually) rapidly accessible, which has 500GB of raided SSD storage, that can push over 3GBit of traffic. 3 cheap node servers, containing 2 x 750GB SATA drives in raid1, where files older than 2 weeks are archived, from the SSD server (mentioned above). Files on each server are accessed via subdomains (via modsec) in a straight forward fashion (server1.domain.com, server2.domain.com, etc) Where I have the problem is this. I introduced a "premium" service where people pay a small fee every month, and get ad-free, quick accesses to stuff on the site. Once they are logged in, they access same files via premium.server1.domain.com via a different modsec script, with a different pass phrase. That all works fine and dandy.... except the cheap node servers are all IO bound, so accessing the files on them via a different, unsaturated network makes no difference, since it cannot read off the drive fast enough. What would be a good way to make files on the site be accessible via 2 different network routes, 1 of which will be saturated (the "free network") while all other files are on an un-saturated "premium" network?

  Read the article

• How do I create a read only MySQL user for backup purposes with mysqldump?

  - by stickmangumby

  I'm using the automysqlbackup script to dump my mysql databases, but I want to have a read-only user to do this with so that I'm not storing my root database password in a plaintext file. I've created a user like so: grant select, lock tables on *.* to 'username'@'localhost' identified by 'password'; When I run mysqldump (either through automysqlbackup or directly) I get the following warning: mysqldump: Got error: 1044: Access denied for user 'username'@'localhost' to database 'information_schema' when using LOCK TABLES Am I doing it wrong? Do I need additional grants for my readonly user? Or can only root lock the information_schema table? What's going on? Edit: GAH and now it works. I may not have run FLUSH PRIVILEGES previously. As an aside, how often does this occur automatically? Edit: No, it doesn't work. Running mysqldump -u username -p --all-databases > dump.sql manually doesn't generate an error, but doesn't dump information_schema. automysqlbackup does raise an error.

  Read the article

• How to create a static IP on Windows Server 2008 R2 so I can access the server remotely

  - by Aesir

  I have just purchased a HP Proliant N40L which I am intending to use as a NAS, learning tool and just in general something to mess around with. As a student via the Microsoft dreamspark program I can get a free copy of Windows Server 2008 R2 which I am using as the OS. So that I can remote to the box from outside of my local network and so that I can stream media from it to my PS3, I have read that I need to create a static IP for the server and use port forwarding to forward to this IP so I can remote in. Is this correct? I am not really sure how to do this and if I need to make these changes on my router configuration, on the OS or both. I am a novice when it comes to networking however most resources for Windows server 2008 R2 seem to assume a fair amount of experience already. I realise that using this particular OS may seem like overkill for what I currently wish to do with it (stream content to other devices and backup) but as I can get a copy for free it seems sensible. Edit: From reading answers posted I feel I should give more information. I have now tried to add a static IP address using my router configuration settings. I have used the getmac command to get the mac address of the server. My ISP is Virgin Media and I have gone to the LAN IP section and I have added an IP address to the DHCP Reservation Lease Info. I can now use remote desktop connection internally to remote to the server (so I am assuming assigning this IP has worked). How do I configure this on the OS as well? I am also unsure on how I would remote to this machine outside of my local network?

  Read the article

• CUPS printer on Vritual Machine can be access via CUPS admin, but not by XP?

  - by SJaguar13

  I have a Zebra label printer connected to a Linux Mint virtual machine. It was set up with CUPS and a Windows XP computer can then print to it via http://192.168.1.76:632/printers/labelprinter. That was all fine and dandy I then hooked up a Fargo Pro L PVC card printer to a Windows XP virtual machine. I had to disconnect the label printer as the server that hosted both virtual machines only has 1 parallel port. Now I plugged in the Zebra again, and it cannot print from the Windows XP computer anymore. If I go to the CUPS admin panel on the Windows XP computer, I can see it, everything looks fine, and I can send it a test page to print which works. If I try to print from Windows, I get an error that the printer is not found/cannot connect to the server. The only other thing that changed was the firewall on the router to allow remote desktop to another computer from outside the network, but all the firewall stuff was for external use. Nothing affected the IP address of the internal network. The Linux Mint VM also had a PDF pritner that was shared with CUPS. That printer is also down. I tried setting up a new CUPS installation on another VM, and when I go to share it with XP, I get the same error. I don't know what to try. It has access, it can get to the admin from that computer, it seems to be up and ready, but when Windows tries to connect, the printer isn't found even though 4 days ago everything was fine. Any ideas?

  Read the article

• How to create hash or yml from top level attributes values of node?

  - by Sarah Haskins

  I have a chef recipe where I want to take all of the attributes under node['cfn']['environment'] and write them to a yml file. I could do something like this (it works fine): content = { "environment_class" => node['cfn']['environment']['environment_class'], "node_id" => node['cfn']['environment']['node_id'], "reporting_prefix" => node['cfn']['environment']['reporting_prefix'], "cfn_signal_url" => node['cfn']['environment']['signal_url'] } yml_string = YAML::dump(content) file "/etc/configuration/environment/platform.yml" do mode 0644 action :create content "#{yml_string}" end But I don't like that I have to explicitly list out the names of the attributes. If later I add a new attributes it would be nice if it automatically was included in the written out yml file. So I tried something like this: yml_string = node['cfn']['environment'].to_yaml But because the node is actually a Mash, I get a platform.yml file like this (it contains a lot of unexpected nesting that I don't want): --- !ruby/object:Chef::Node::Attribute normal: tags: [] cfn: environment: &25793640 reporting_prefix: Platform2 signal_url: https://cloudformation-waitcondition-us-east-1.s3.amazonaws.com/... environment_class: Dev node_id: i-908adf9 ... But what I want is this: ---- reporting_prefix: Platform2 signal_url: https://cloudformation-waitcondition-us-east-1.s3.amazonaws.com/... environment_class: Dev node_id: i-908adf9 How can I achieve the desired yml output w/o explicitly listing the attributes by name?

  Read the article

• How to create a init.d script for openssh-server which was compiled and installed from source using configure + make + make install?

  - by Patrick L

  I have installed openssh-server in my Ubuntu PC using apt-get install openssh-server. The version is 5.9. Now, I would like to compile and install openssh-server version 6.2 from source codes. I have successfully downloaded the source codes, and run the following commands: ./configure make make install I found that the new version of openssh-server was installed into /usr/local/sbin/. The old version of openssh-server is in /usr/sbin/. I found that the service script in /etc/init.d/ssh is still pointing to /usr/sbin/. And the old openssh-server (v5.9) is still running. How can I replace the old openssh-server with the new openssh-server that I have just compiled and installed? How can I create a init.d script to start and stop the new openssh-server that I've compiled from source manually? How to start the new openssh-server on boot? When I install openssh-server using apt-get install, the config files will be installed into /etc/ssh/. If I compile and install it from source, where is the config file? If I compiled openssh-server from source, but I install openssh-client package using apt-get install, will there be any config files conflict? Thanks.

  Read the article

• How to access previous VHD versions of system backup?

  - by feklee

  Quote from the 31 Oct 2009 TechNet article "Learn more about system image backup": During the first backup, the backup engine scans the source drive and copies only blocks that contain data into a .vhd file stored on the target, creating a compact view of the source drive. The next time a system image is created, only new and changed data is written to the .vhd file, and old data on the same block is moved out of the VHD and into the shadow copy storage area. Volume Shadow Copy Service is used to compute the changed data between backups, as well as to handle the process of moving the old data out to the shadow copy area on the target. This approach makes the backup fast (since only changed blocks are backed up) and efficient (since data is stored in a compact manner). When restoring the image, blocks will be restored to their original locations on the source disk. If you want to restore from an older backup, the engine reads from the shadow copy area and restores the appropriate blocks. For the last days, a daily system backup of drive C: to drive E: has been scheduled and run by Windows 7 Backup and Restore. Drive C: currently holds 233 GB of data, which fits comfortably on drive E:, a 1 TB drive, with 727 GB of free space remaining. How do I access the previous version of a VHD? I right clicked on files and folders in E:\WindowsImageBackup, and I looked for Previous Versions but always: There are no previous versions available

  Read the article

< Previous Page | 390 391 392 393 394 395 396 397 398 399 400 401  | Next Page >