Search Results

Search found 13347 results on 534 pages for 'embedded device'.

Page 395/534 | < Previous Page | 391 392 393 394 395 396 397 398 399 400 401 402  | Next Page >

• 12.04.1 no audio through HDMI

  - by JoJo

  having a bit of an issue with getting audio to go through HDMI. Here are the base specs: OS: Ubuntu Desktop 12.04.1 x64 CPU: AMD A10-5800K 3.8G 4M FM2 R Mobo: MSI FM2-A75MA-E35 OS: Ubuntu 12.04.1 LTS Vid Card: (integrated on CPU) AMD Radeon HD 7660D HDMI sound works fine under Win7 (after mobo and vid drivers are installed), so it's not physically broken. Audio through the normal headphone jacks works fine under Ubuntu. Looking at the audio panel, there is no HDMI output at all. aplay -l also reports only: card 0: Generic [HD-Audio Generic], device 0: ALC887-VD Analog [ALC887-VD Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 In additional drivers there are two versions: ATI/AMD PROPRIETARY FGLRX GRAPHICS DRIVER ATI/AMD PROPRIETARY FGLRX GRAPHICS DRIVER (post-release update) The first installs, but problem persists. I do get more resolutions to pick from. Second version does not, reporting it failed installation and to find details at: /var/log/jockey.log Looked at the log, and it's insanely long, if necessary I can get it to you guys. Did more research and some had luck by manually installing the drivers, so tried to give that a shot by following this: https://help.ubuntu.com/community/BinaryDriverHowto/ATI#Manually_installing_Catalyst_12.6 starting at 3.1 Manually installing Catalyst 12.6. I immediately had 2 issues, (1) the AMD website does not provide any drivers for Linux, and (2) the following command did not work: sudo sh amd-driver-installer-12-6-x86.x86_64.run --buildpkg Ubuntu/precise sh: 0: Can't open amd-driver-installer-12-6-x86.x86_64.run Some other posts stated to update "alsa-drivers", but that also did not work as install command for the new version of them did not work. I forget the exact issue, but similar to above, cannot open / cannot find. Any help would be greatly appreciated!

  Read the article

• Upgrade from 11.04 to 12.04 failed - unable to login

  - by Tobias M.

  Yesterday i updgraded from 10.04 to 12.04 via the update-manager. At the end it said "Failed to upgrade due to too many errors". Before that i got a lot of error messages that said packages could ne configured - they were all related to mono. Then it force me to restart. When booting now, I see the pink screen (without logo). After that it turns black and the cursor appears. Then its falshing around between beeing bright and dark and showing the cursor and not showing it. But no way i see the login-screen. At the moment i am not able to boot frm usb since my usb device is too large to be formated to FAT-32 (8GB). This all is happening on this machine: AMD E-350 Processor (2x1,65Ghz) 4GB DDR3 RAM 320GB SATA II Hard drive AMD® Radeon™ HD 6320 Thanks in advance to everyone who trys helping me ;) I have to continue working with data from this machine so i´d be pleased to get my data accessible. Greets ;)

  Read the article

• Attend my Tech Ed 2014 session: Debugging Tips and Tricks

  - by Daniel Moth

  Just a week away, at Tech Ed 2014 NA in Houston Texas, I will be giving a demo presentation that you will not want to miss (assuming you code in Visual Studio). Add it to your calendar now: DEV-B352 Debugging Tips and Tricks in Visual Studio 2013 (link) Monday, May 12 1:15-2:30 PM, Room: General Assembly C As a developer, regardless of your programming language or the platform that you target, you use the debugger on a daily basis. Come to this all-demo session to learn how to make the most of the Visual Studio debugger, and hence be more productive and effective in your everyday development. We tour almost all of the debugger surface and many of its commands, throwing in tips and tricks as we go along, and also calling out what is brand new in the latest version of the debugger in Microsoft Visual Studio 2013. Whatever your experience level, you are guaranteed to leave with new knowledge of debugger features that you will want to use immediately when you are back at your computer!   I am also co-presenting another session later in the week. DEV-B313 Diagnosing Issues in Windows Phone 8.1 XAML Applications Using Visual Studio 2013 (link) Thursday, May 15 10:15-11:30 AM, Room: 340 Come to this demo-driven session to learn how to use the latest diagnostic tools in Visual Studio 2013 to make your Windows Phone 8.1 XAML apps reliable, fast, and efficient. Learn how to make the most of existing capabilities in the debugger as well as new debugging features for diagnosing correctness issues. Also, see the Visual Studio Performance and Diagnostics hub in action with its performance analysis tools for diagnosing CPU usage, memory usage, and energy consumption. The techniques covered in this session apply equally well for Windows Store apps as well as Windows Phone Store apps, so all your device development needs will be covered.   Links to both sessions from my Tech Ed speaker page. See you there! Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• Where can I find video and audio drivers for my netbook?

  - by Ari

  I got a little netbook yesterday (an Acer Aspire One) for schoolwork and read in numerous reviews Ubuntu was a must. I dove into it blindly and downloaded 12.04 LTS and though I admit it's faster than before, I have no idea how it works yet and was stupid enough to get rid of the Windows 7 Starter that was on there before completely. I can see myself getting used to the rest of Ubuntu, but the main issue is that it seems to have eaten all of my drivers and I don't know where to get any Ubuntu compatible ones. Any video at all is jilty and kind of creepy and any audio is very distorted and REALLY creepy. I understand that this is a tiny $150 typing and light web use school device I'm talking about, but I feel really stupid making the poor thing worse than it was before and not knowing what to do about it. Does anyone know how to install graphics/sound drivers? Or, alternatively, does anyone know where I can get a copy of Windows 7 Starter. I can see myself liking this if the problems are fixable, but if not I still have the product key and would be able to tackle the problem by myself with that.

  Read the article

• Strange Ubuntu Random Display [Video]

  - by d4v1dv00

  I had this random display issue ever since Ubuntu 11.04 and now running Ubuntu 11.10 and this problem still persist. It is very hard for me to explain, so I uploaded a video to elaborate itself. Before I convert from Windows 7, this issue never happened. The symptom is so random that I cannot reproduce or tell precisely when will this happen again. My wild guess is, should this be related to driver? Below are my detail system information: $ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation H67 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57788 Gigabit Ethernet PCIe (rev 01) is there any other information i need to post and how do i do that?

  Read the article

• Use Network-Manager to Connect to a wifi Access Point on the command-line

  - by Stefano Palazzo

  I'd like to connect to a wireless access point from the command-line. ideally, I'd only need the name of the AP. But the hardware-address would work as well. I know I can use nmcli to connect to a managed network connection, but in my case, the access point may not be configured for Network-Manager yet (See the difference between the output of nm-tool and nmcli con). Example output of nmcli: Auto pwln 3a3d62b1-bbdf-4f76-b4d2-c211fd5cfb03 802-11-wireless [...] Wired Network aa586921-accf-4932-98c4-c873c310f08e 802-3-ethernet [...] Cisco-UDP Uni 7f94847b-04dc-40b7-9955-5246fb77cc65 vpn [...] T-mobile (D1) 867f345a-cbbf-4bd4-b883-a5e5ae0932f0 gsm [...] Example output of nm-tool: State: connected - Device: eth1 [Auto pwln] ---------------------------------------------------- [...] Wireless Access Points (* = current AP) *pwln: Infra, [...], Freq 2472 MHz, Rate 54 Mb/s, Strength 80 WPA WPA2 WLAN: Infra, [...], Freq 2422 MHz, Rate 54 Mb/s, Strength 20 WPA WPA2 [...] How do I connect to an access point that may or may not be known to NM? Extra: Finding out if the connection needs a pass-phrase, and submitting it on the command-line as well would be great too (that is to say It'd be nice if network-manager wouldn't pop open any keyring dialogues or errors on the gui)

  Read the article

• Blank Screen at boot Ubuntu 12.04 - nvidia-current - Macbook Air 3,2

  - by soulnafein

  I've installed nvidia-current using the Additional Drivers application in Ubuntu 12.04. I need those drivers so I can use accelerated WebGL. After installing the drivers, and rebooting X fails to start and I have a frozen system/dark screen. Below is the content of Xorg.0.log How can I fix this problem? [ 4.666] X.Org X Server 1.11.3 Release Date: 2011-12-16 [ 4.666] X Protocol Version 11, Revision 0 [ 4.666] Build Operating System: Linux 2.6.42-23-generic x86_64 Ubuntu [ 4.666] Current Operating System: Linux david-macbook-air 3.2.0-34-generic #53-Ubuntu SMP Thu Nov 15 10:48:16 UTC 2012 x86_64 [ 4.666] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-34-generic root=UUID=b3d5ae2a-72af-4ef9-b775-0d40b5f80f9b ro quiet splash vt.handoff=7 [ 4.666] Build Date: 29 August 2012 12:12:33AM [ 4.666] xorg-server 2:1.11.4-0ubuntu10.8 (For technical support please see http://www.ubuntu.com/support) [ 4.666] Current version of pixman: 0.24.4 [ 4.666] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 4.666] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 4.666] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 13 10:18:02 2012 [ 4.668] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 4.668] (==) No Layout section. Using the first Screen section. [ 4.668] (==) No screen section available. Using defaults. [ 4.668] (**) |-->Screen "Default Screen Section" (0) [ 4.668] (**) | |-->Monitor "<default monitor>" [ 4.668] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 4.668] (==) Automatically adding devices [ 4.668] (==) Automatically enabling devices [ 4.668] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 4.668] Entry deleted from font path. [ 4.668] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 4.668] Entry deleted from font path. [ 4.669] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 4.669] Entry deleted from font path. [ 4.669] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 4.669] Entry deleted from font path. [ 4.669] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 4.669] Entry deleted from font path. [ 4.669] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 4.669] Entry deleted from font path. [ 4.669] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 4.669] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 4.669] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 4.669] (II) Loader magic: 0x7f6222467b00 [ 4.669] (II) Module ABI versions: [ 4.669] X.Org ANSI C Emulation: 0.4 [ 4.669] X.Org Video Driver: 11.0 [ 4.669] X.Org XInput driver : 16.0 [ 4.669] X.Org Server Extension : 6.0 [ 4.670] (--) PCI:*(0:2:0:0) 10de:08a3:106b:00d3 rev 162, Mem @ 0x92000000/16777216, 0x80000000/268435456, 0x90000000/33554432, I/O @ 0x00001000/128, BIOS @ 0x????????/131072 [ 4.670] (II) Open ACPI successful (/var/run/acpid.socket) [ 4.670] (II) LoadModule: "extmod" [ 4.671] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 4.671] (II) Module extmod: vendor="X.Org Foundation" [ 4.671] compiled for 1.11.3, module version = 1.0.0 [ 4.671] Module class: X.Org Server Extension [ 4.671] ABI class: X.Org Server Extension, version 6.0 [ 4.671] (II) Loading extension MIT-SCREEN-SAVER [ 4.671] (II) Loading extension XFree86-VidModeExtension [ 4.671] (II) Loading extension XFree86-DGA [ 4.671] (II) Loading extension DPMS [ 4.671] (II) Loading extension XVideo [ 4.671] (II) Loading extension XVideo-MotionCompensation [ 4.671] (II) Loading extension X-Resource [ 4.671] (II) LoadModule: "dbe" [ 4.671] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 4.671] (II) Module dbe: vendor="X.Org Foundation" [ 4.671] compiled for 1.11.3, module version = 1.0.0 [ 4.671] Module class: X.Org Server Extension [ 4.671] ABI class: X.Org Server Extension, version 6.0 [ 4.671] (II) Loading extension DOUBLE-BUFFER [ 4.671] (II) LoadModule: "glx" [ 4.671] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so [ 4.869] (II) Module glx: vendor="NVIDIA Corporation" [ 4.869] compiled for 4.0.2, module version = 1.0.0 [ 4.869] Module class: X.Org Server Extension [ 4.869] (II) NVIDIA GLX Module 295.40 Thu Apr 5 21:57:38 PDT 2012 [ 4.869] (II) Loading extension GLX [ 4.869] (II) LoadModule: "record" [ 4.870] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 4.870] (II) Module record: vendor="X.Org Foundation" [ 4.870] compiled for 1.11.3, module version = 1.13.0 [ 4.870] Module class: X.Org Server Extension [ 4.870] ABI class: X.Org Server Extension, version 6.0 [ 4.870] (II) Loading extension RECORD [ 4.870] (II) LoadModule: "dri" [ 4.870] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 4.870] (II) Module dri: vendor="X.Org Foundation" [ 4.870] compiled for 1.11.3, module version = 1.0.0 [ 4.870] ABI class: X.Org Server Extension, version 6.0 [ 4.870] (II) Loading extension XFree86-DRI [ 4.870] (II) LoadModule: "dri2" [ 4.871] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 4.871] (II) Module dri2: vendor="X.Org Foundation" [ 4.871] compiled for 1.11.3, module version = 1.2.0 [ 4.871] ABI class: X.Org Server Extension, version 6.0 [ 4.871] (II) Loading extension DRI2 [ 4.871] (==) Matched nvidia as autoconfigured driver 0 [ 4.871] (==) Matched nouveau as autoconfigured driver 1 [ 4.871] (==) Matched nv as autoconfigured driver 2 [ 4.871] (==) Matched vesa as autoconfigured driver 3 [ 4.871] (==) Matched fbdev as autoconfigured driver 4 [ 4.871] (==) Assigned the driver to the xf86ConfigLayout [ 4.871] (II) LoadModule: "nvidia" [ 4.871] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so [ 4.887] (II) Module nvidia: vendor="NVIDIA Corporation" [ 4.887] compiled for 4.0.2, module version = 1.0.0 [ 4.887] Module class: X.Org Video Driver [ 4.892] (II) LoadModule: "nouveau" [ 4.894] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 4.894] (II) Module nouveau: vendor="X.Org Foundation" [ 4.894] compiled for 1.11.3, module version = 1.0.2 [ 4.894] Module class: X.Org Video Driver [ 4.894] ABI class: X.Org Video Driver, version 11.0 [ 4.894] (II) LoadModule: "nv" [ 4.895] (WW) Warning, couldn't open module nv [ 4.895] (II) UnloadModule: "nv" [ 4.895] (II) Unloading nv [ 4.895] (EE) Failed to load module "nv" (module does not exist, 0) [ 4.895] (II) LoadModule: "vesa" [ 4.895] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 4.896] (II) Module vesa: vendor="X.Org Foundation" [ 4.896] compiled for 1.11.3, module version = 2.3.0 [ 4.896] Module class: X.Org Video Driver [ 4.896] ABI class: X.Org Video Driver, version 11.0 [ 4.896] (II) LoadModule: "fbdev" [ 4.896] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 4.896] (II) Module fbdev: vendor="X.Org Foundation" [ 4.896] compiled for 1.11.3, module version = 0.4.2 [ 4.896] ABI class: X.Org Video Driver, version 11.0 [ 4.896] (==) Matched nvidia as autoconfigured driver 0 [ 4.896] (==) Matched nouveau as autoconfigured driver 1 [ 4.896] (==) Matched nv as autoconfigured driver 2 [ 4.896] (==) Matched vesa as autoconfigured driver 3 [ 4.896] (==) Matched fbdev as autoconfigured driver 4 [ 4.896] (==) Assigned the driver to the xf86ConfigLayout [ 4.896] (II) LoadModule: "nvidia" [ 4.896] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so [ 4.896] (II) Module nvidia: vendor="NVIDIA Corporation" [ 4.896] compiled for 4.0.2, module version = 1.0.0 [ 4.896] Module class: X.Org Video Driver [ 4.896] (II) UnloadModule: "nvidia" [ 4.896] (II) Unloading nvidia [ 4.896] (II) Failed to load module "nvidia" (already loaded, 32610) [ 4.896] (II) LoadModule: "nouveau" [ 4.897] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 4.897] (II) Module nouveau: vendor="X.Org Foundation" [ 4.897] compiled for 1.11.3, module version = 1.0.2 [ 4.897] Module class: X.Org Video Driver [ 4.897] ABI class: X.Org Video Driver, version 11.0 [ 4.897] (II) UnloadModule: "nouveau" [ 4.897] (II) Unloading nouveau [ 4.897] (II) Failed to load module "nouveau" (already loaded, 32610) [ 4.897] (II) LoadModule: "nv" [ 4.897] (WW) Warning, couldn't open module nv [ 4.897] (II) UnloadModule: "nv" [ 4.897] (II) Unloading nv [ 4.897] (EE) Failed to load module "nv" (module does not exist, 0) [ 4.897] (II) LoadModule: "vesa" [ 4.898] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 4.898] (II) Module vesa: vendor="X.Org Foundation" [ 4.898] compiled for 1.11.3, module version = 2.3.0 [ 4.898] Module class: X.Org Video Driver [ 4.898] ABI class: X.Org Video Driver, version 11.0 [ 4.898] (II) UnloadModule: "vesa" [ 4.898] (II) Unloading vesa [ 4.898] (II) Failed to load module "vesa" (already loaded, 0) [ 4.898] (II) LoadModule: "fbdev" [ 4.898] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 4.898] (II) Module fbdev: vendor="X.Org Foundation" [ 4.898] compiled for 1.11.3, module version = 0.4.2 [ 4.898] ABI class: X.Org Video Driver, version 11.0 [ 4.898] (II) UnloadModule: "fbdev" [ 4.898] (II) Unloading fbdev [ 4.899] (II) Failed to load module "fbdev" (already loaded, 0) [ 4.899] (II) NVIDIA dlloader X Driver 295.40 Thu Apr 5 21:38:35 PDT 2012 [ 4.899] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 4.899] (II) NOUVEAU driver Date: Wed Sep 12 13:42:43 2012 +0200 [ 4.899] (II) NOUVEAU driver for NVIDIA chipset families : [ 4.899] RIVA TNT (NV04) [ 4.899] RIVA TNT2 (NV05) [ 4.899] GeForce 256 (NV10) [ 4.899] GeForce 2 (NV11, NV15) [ 4.899] GeForce 4MX (NV17, NV18) [ 4.899] GeForce 3 (NV20) [ 4.900] GeForce 4Ti (NV25, NV28) [ 4.900] GeForce FX (NV3x) [ 4.900] GeForce 6 (NV4x) [ 4.900] GeForce 7 (G7x) [ 4.900] GeForce 8 (G8x) [ 4.900] GeForce GTX 200 (NVA0) [ 4.900] GeForce GTX 400 (NVC0) [ 4.900] (II) VESA: driver for VESA chipsets: vesa [ 4.900] (II) FBDEV: driver for framebuffer: fbdev [ 4.900] (++) using VT number 7 [ 4.902] (II) Loading sub module "fb" [ 4.902] (II) LoadModule: "fb" [ 4.902] (II) Loading /usr/lib/xorg/modules/libfb.so [ 4.902] (II) Module fb: vendor="X.Org Foundation" [ 4.902] compiled for 1.11.3, module version = 1.0.0 [ 4.902] ABI class: X.Org ANSI C Emulation, version 0.4 [ 4.902] (II) Loading sub module "wfb" [ 4.902] (II) LoadModule: "wfb" [ 4.903] (II) Loading /usr/lib/xorg/modules/libwfb.so [ 4.905] (II) Module wfb: vendor="X.Org Foundation" [ 4.905] compiled for 1.11.3, module version = 1.0.0 [ 4.905] ABI class: X.Org ANSI C Emulation, version 0.4 [ 4.905] (II) Loading sub module "ramdac" [ 4.905] (II) LoadModule: "ramdac" [ 4.905] (II) Module "ramdac" already built-in [ 4.907] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so [ 4.907] (II) Loading /usr/lib/xorg/modules/libwfb.so [ 4.907] (II) Loading /usr/lib/xorg/modules/libfb.so [ 4.912] (WW) Falling back to old probe method for vesa [ 4.912] (WW) Falling back to old probe method for fbdev [ 4.912] (II) Loading sub module "fbdevhw" [ 4.912] (II) LoadModule: "fbdevhw" [ 4.912] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 4.912] (II) Module fbdevhw: vendor="X.Org Foundation" [ 4.912] compiled for 1.11.3, module version = 0.0.2 [ 4.912] ABI class: X.Org Video Driver, version 11.0 [ 4.912] (II) NVIDIA(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 4.912] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32 [ 4.912] (==) NVIDIA(0): RGB weight 888 [ 4.912] (==) NVIDIA(0): Default visual is TrueColor [ 4.912] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 4.912] (**) NVIDIA(0): Enabling 2D acceleration [ 5.442] (EE) NVIDIA(0): Failed to initialize the display subsystem for the NVIDIA [ 5.442] (EE) NVIDIA(0): graphics device! [ 5.442] (EE) NVIDIA(0): Failed to get supported display device(s) [ 5.442] (EE) NVIDIA(0): Failed to initialize dac HAL [ 5.442] (II) UnloadModule: "nvidia" [ 5.442] (II) Unloading nvidia [ 5.442] (II) UnloadModule: "wfb" [ 5.442] (II) Unloading wfb [ 5.442] (II) UnloadModule: "fb" [ 5.443] (II) Unloading fb [ 5.443] (EE) Screen(s) found, but none have a usable configuration. [ 5.443] Fatal server error: [ 5.443] no screens found [ 5.443] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 5.443] Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 5.443] [ 5.447] ddxSigGiveUp: Closing log [ 5.447] Server terminated with error (1). Closing log file.

  Read the article

• Bad DMA/do_IRQ errors on suspend/resume, with occasional freezing

  - by Steve Kroon

  Every time I suspend or resume my laptop (Dell Latitude E6520, bought this year), I get 2 messages of the form displayed on the console just before shutting down/starting up: [ 407.107610] ehci_hcd 0000:00:1d.0: dma_pool_free buffer-128, f6f18000/36f18000 (bad dma) On occasion, I get a message of the form: [ 3753.979066] do_IRQ: 0.177 No irq handler for vector (irq -1) On occasion, my machine freezes with a flashing Caps Lock button when suspending, after which I need to do a hard shutdown. This never happened before the messages started appearing (a while back), and I think it never happens without a do_IRQ message appearing (although I'm not sure about that). [There's nothing in the owner's manual on a flashing Caps Lock button; apparently it may be a kernel panic if the scroll lock also flashes, but the laptop doesn't have a scroll lock light, and there's no message on the console saying kernel panic.] Are these bad DMA/do IRQ messages serious, and what can I do to investigate/troubleshoot them and the freezing? Edit: I've also now received the following error messages a few times: [246943.023908] JBD: I/O error detected when updating journal superblock for sdb1. [246943.023958] Buffer I/O error on device sdb1, logical block 0 [246943.023996] EXT3-fs (sdb1): I/O error while writing superblock Edit: Output of dmesg at http://pastebin.com/ra7MTQEj ; contents of /var/log/kern.log at http://pastebin.com/i6jf0Md9 Edit: the output of some smartctl (-a, -x, --log=error, --log=xerror) instructions is available at http://paste.ubuntu.com/1088488/ . Edit (31/8/2012): Output of dmesg|grep -i ehci available at http://paste.ubuntu.com/1177246/ .

  Read the article

• 12.04 grub unable to boot on /sde, upgrade-grub and boot-repair failed, please help

  - by VGR

  My problem is I've 4 disks in a raid array listed as sda, sdb... sdd and grub 2 refuses to boot on /sde (the 5th disk, standalone and containing a clean install of 12.04 64 bits). I tried all solutions but all fail. (live CD/USB with grub-setup, also tried repair-grub, and tried also in the "grub rescue" set prefix= etc). I also tried to deactivate the RAID array in the BIOS, but I'd rather not destroy it, and I didn't find a way to make the standalone disk as '/sda1' (this would satisfy grub). In the BIOS, the would-be /sda is the only bootable hard disk; it ends up as /sde and grubs complains. I've made repair-grub issue a pastebin. I always end up in grub-rescue and I'm stuck. I need Ubuntu to boot so that I can add the device array handler for my disks. I can't switch the disks and I can't disconnect the SATA RAID controller. I need: (a) a workaround so that grub starts on /sde; or (b) a way to change the order in which Ubuntu sees the disks, at boot time. I could then provide grub with a /sda1. Thanks a lot. up please thanks a lot it's not the same problem as booting ubuntu from raid. My RAID array serves only of data repository windows had no problem with this configuration

  Read the article

• Oracle at Information Security and Risk Management Conference (ISACA Conferences)

  - by Tanu Sood

  The North America Information Security and Risk Management (ISRM) Conference hosted by ISACA will be held this year from November 14 - 16 in Las Vegas, Nevada and Oracle is a platinum sponsor. The ISRM / IT GRC event is not only designed to meet the exact needs of information security, governance, compliance and risk management professionals like you, but also gives you the tools you need to solve the issues you currently face. The event builds on and includes the key elements of information security, governance, compliance and risk management practices, and offers a fresh perspective on current and future trends. As a Platinum Sponsor Oracle will not only have an opportunity to demonstrate but talk through our strategic roadmap and support to ensure all organizations understand our key role within the industry to ensure corporate data and information remains safe. Join us at the Lunch and Learn to learn more about the latest advances in Oracle Identity Management. Lunch and Learn Session: Trends in Identity Management Speaker: Mike Neuenschwander, Senior Product Development Director, Oracle Identity Management As enterprises embrace mobile and social applications, security and audit have moved into the foreground. The way we work and connect with our customers is changing dramatically and this means, re-thinking how we secure the interaction and enable the experience. Work is an activity not a place - mobile access enables employees to work from any device anywhere and anytime. Organizations are utilizing "flash teams" - instead of a dedicated group to solve problems, organizations utilize more cross-functional teams. Work is now social - email collaboration will be replaced by dynamic social media style interaction. In this session, we will examine these three secular trends and discuss how organizations can secure the work experience and adapt audit controls to address the "new work order". We also recommend you bookmark the following session: T1 Session 301: Gone in 60 Seconds: Mitigating Database Security Risk Friday, November 16, 8:30 am – 9:30 am And, do be sure to stop by our booth, # 100 & #102, to not only network with our Product Development Team, but also get an onsite demonstration of Oracle Security Solutions. See you there? ISRM /  IT GRC November 14 – 16, 2012 Mirage Casino-Hotel 3400 Las Vegas Boulevard South Las Vegas, NV, 89109

  Read the article

• Why does 12.04 upgrade abort with out of space error when I have lots of it?

  - by Kristian Thomsen

  When upgrading Ubuntu from 11.10 to 12.04 I discovered an unexpected problem. The upgrade was stopped because there wasn't enough free space for the installation. I managed to free some space and do the upgrade but now a prompt appears after logging in saying I'm out of space. This prompt asks me if I want to examine the problem. The "Disk Usage Analyser" is opened. In the top it says: Total filesystem capacity: 47.0 GB (used: 13.5 GB available: 33.4 GB) Folder -- Usage -- Size / -- 100% -- 12.5 GB usr -- 44.8 % -- 5.6 GB home -- 30.3 % -- 3.8 GB lib -- 13.0 % -- 1.6 GB var -- 9.1 % -- 1.1 GB boot 2.5 % 309.5 GB and a lot of small contributors like: etc, opt, sbin, bin etc. I do not really understand this problem since the analyser in the top says that I have 33.4 GB left in this file system. What can I do to make Ubuntu use the remaining space? Running df -i in the terminal gives: Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sda7 610800 576874 33926 95% / udev 213451 563 212888 1% /dev tmpfs 218524 486 218038 1% /run none 218524 3 218521 1% /run/lock none 218524 7 218517 1% /run/shm /dev/sda8 2264752 16371 2248381 1% /home The output of df -h Filesystem Size Used Avail Use% Mounted on /dev/sda7 9,3G 7,8G 1,1G 88% / udev 993M 4,0K 993M 1% /dev tmpfs 401M 884K 400M 1% /run none 5,0M 0 5,0M 0% /run/lock none 1003M 152K 1002M 1% /run/shm /dev/sda8 35G 4,0G 29G 13% /home /dev/sda2 101G 64G 37G 64% /media/A2C8E28BC8E25CD3 Running sudo fdisk -l gives Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000080 Device Boot Start End Blocks Id System /dev/sda1 63 96389 48163+ de Dell Utility /dev/sda2 * 98304 210434488 105168092+ 7 HPFS/NTFS/exFAT /dev/sda3 210436094 312576704 51070305+ f W95 Ext'd (LBA) /dev/sda5 306279288 312576704 3148708+ dd Unknown /dev/sda6 210436096 214341631 1952768 82 Linux swap / Solaris /dev/sda7 214343680 233873407 9764864 83 Linux /dev/sda8 233875456 306278399 36201472 83 Linux Partition table entries are not in disk order

  Read the article

• Installing LBP 2900 printer -> libs folders wrong?

  - by Peter Smit

  I am trying to get my Canon LBP2900 printer to work on Ubuntu 11.10 64 bit. What I have done is try to follow the steps on https://help.ubuntu.com/community/CanonCaptDrv190 So I downloaded the version 2.3 driver and tried to convert the rpm files to debian and installed them sudo alien cndrvcups-capt-2.30-1.x86_64.rpm cndrvcups-common-2.30-1.x86_64.rpm sudo dpkg -i cndrvcups-capt-2.30-1.x86_64.deb cndrvcups-common-2.30-1.x86_64.deb restarted cups and try to install the printer with lpadmin: sudo service cups restart sudo /usr/sbin/lpadmin -p LBP2900 -m /usr/share/cups/model/CNCUPSLBP2900CAPTK.ppd -v ccp://localhost:59787 -E What I noticed however that on the step with lpadmin it goes wrong with the error: lpadmin: Bad device-uri scheme "ccp" After trying to trace what has gone wrong, I think I nailed it to the fact that dpkg installed a file /usr/lib64/cups/backend/ccp instead of /usr/lib/cups/backend/ccp Checking the original rpm with archive manager shows indeed that /usr/lib and /usr/lib64 are used, with the backend/cpp file only installed in lib64. As I understand correctly, Ubuntu 11.10 uses /usr/lib32 and /usr/lib instead so the files are installed in the wrong place. Is there an automated method of converting the rpm/deb files with the wrong lib structure to one with the right lib structure for ubuntu 11.10? Or am I completely on the wrong track for getting my printer installed?

  Read the article

• Installing LBP 2900 ubuntu -> libs folders wrong?

  - by Peter Smit

  I am trying to get my Canon LBP2900 printer to work on Ubuntu 11.10 64 bit. What I have done is try to follow the steps on https://help.ubuntu.com/community/CanonCaptDrv190 So I downloaded the version 2.3 driver and tried to convert the rpm files to debian and installed them sudo alien cndrvcups-capt-2.30-1.x86_64.rpm cndrvcups-common-2.30-1.x86_64.rpm sudo dpkg -i cndrvcups-capt-2.30-1.x86_64.deb cndrvcups-common-2.30-1.x86_64.deb restarted cups and try to install the printer with lpadmin: sudo service cups restart sudo /usr/sbin/lpadmin -p LBP2900 -m /usr/share/cups/model/CNCUPSLBP2900CAPTK.ppd -v ccp://localhost:59787 -E What I noticed however that on the step with lpadmin it goes wrong with the error: lpadmin: Bad device-uri scheme "ccp" After trying to trace what has gone wrong, I think I nailed it to the fact that dpkg installed a file /usr/lib64/cups/backend/ccp instead of /usr/lib/cups/backend/ccp Checking the original rpm with archive manager shows indeed that /usr/lib and /usr/lib64 are used, with the backend/cpp file only installed in lib64. As I understand correctly, Ubuntu 11.10 uses /usr/lib32 and /usr/lib instead so the files are installed in the wrong place. Is there an automated method of converting the rpm/deb files with the wrong lib structure to one with the right lib structure for ubuntu 11.10? Or am I completely on the wrong track for getting my printer installed?

  Read the article

• Kinect will recognise your finger movement

  - by Boonei

  Sources inside Microsoft suggest they MS guys are tying to improve motion controller. This could be a huge boost to gaming. There are quite a few things that we can do with our fingers when playing games like driving, shooting,sports etc. If fingers are captured then  XBox will give more realistic version of our avatar. Eurogamer has also suggested the same according to their sources. It would be only(mostly) a software update and would not require a new camera, because the USB controller interface currently in place in Kinect can take in data up-to 35MBps. The current utilization is only around roughly 1/2 of it. So there is currently a facility to send more data. Little more tech data, Kinect does transmit 320×240-pixel in 30 fps, if the device could capture and transfer at 640×480 pixels, then better resolution can detect more movements compared to current level of detection. Lets wait and watch ! This article titled,Kinect will recognise your finger movement, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• Group Video Chat On iPad With Fring App

  - by Gopinath

  Apple’s Facetime is the simplest and most easy to use video chat application available for iOS devices and Apple Macs. Facetime lets you have a one-to-one video chat, but what about having a group chat on your iPad with a bunch of friends? Here comes Fring App for iPad that lets you group chat up to 4 members at a time. Unlike Facetime Fring does not impose any restriction on the network connectivity for video chatting. You can initiate a group video chatting on any network (3G, Wi-Fi, 4G, etc.) but Wi-Fi is the most preferred option for smooth video streaming. Also Fring is a cross platform application(runs on iOS, Android & Nokia), so your group video chat session can have a mix of devices – iPads, Android smartphones/tablets and Nokia mobiles. Anyone mobile device with a front facing  cam and Fring app is allowed to join the party. Here is the promotional ad of Fring’s group video chatting application By the way did I say that Fring is a free app? Group video on iPad at no cost!!! Download Fring from Apple’s AppStore This article titled,Group Video Chat On iPad With Fring App, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• Cannot copy MP3 files from a CD

  - by MountainX

  I purchased a set of spoken word audio CD's that have MP3 and FLAC audio files; I think they also play as regular audio CD's because I see a CDA directory and .cda files. But I'm only interested in playing the MP3 files by copying them to my phone. Dolphin file manager shows all the files on the CD. However, it will not copy any of them to my hard drive, which is what my goal is. Dolphin shows no error, but the copy progress is zero. Amarok will play the files but not easily. I only tried the flac files. To play a file, I click the file in Dolphin, then I have to cancel a job using KDE's notification system, then Amarok proceeds to copy the file to a tmp directory which takes a long time, then it finally plays. kb3 will rip the audio, but I would prefer to copy the files directly from the CD. Since Dolphin would not copy the files, I thought I would try the terminal, but I can't get that to work either. mount -t auto -o ro /dev/sr0 /mnt/temp that gives the error: wrong fs type, bad option, bad superblock, etc. I get the same error using -t iso9660 and -t udf. so I started troubleshooting: ~$ wodim --devices wodim: Overview of accessible drives (1 found) : ------------------------------------------------------------------------- 0 dev='/dev/sg1' rwrw-- : 'MATSHITA' 'DVD-RAM UJ8A0AS' ------------------------------------------------------------------------- /dev/sg1 is not a block device sudo file -s /dev/sr0 ERROR: cannot read /dev/sr0 (input/output error) sudo file -s /dev/sg1 just hangs How can I copy these files to my computer hard disk?

  Read the article

• how can I fix error: hd0 out of disk?

  - by rux

  I am running Ubuntu 12.04 on a netbook - Acer AS 1410. After a download session, I restarted the computer and it said: error: hd0 out of disk. Press any key to continue... I pressed everything, but it's just frozen there. Any idea what's wrong with it and what I can do to fix it? I haven't been able to run my computer at all since it's frozen like that. Help please! I booted the live cd and ran sudo fdisk -lu into terminal, and here's what it gave me: Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders, total 117231408 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a696263 Device Boot Start End Blocks Id System /dev/sda3 2048 117229567 58613760 5 Extended /dev/sda5 * 71647232 109039615 18696192 83 Linux /dev/sda6 109041664 117229567 4093952 82 Linux swap / Solaris /dev/sda7 4096 71645183 35820544 83 Linux Partition table entries are not in disk order I am somewhat of a beginner in this, so don't know what this means. any ideas? Thanks!

  Read the article

• Reboot failure after upgrade from 8.04 LTS to 10.04 LTS

  - by Alan Fietz

  I bought our computer from Freegeeks with Ubuntu 8.04 installed. I upgraded from Ubuntu 8.04 to 10.04 on Thursday November 10. I have an ASUS P4P800SE with dual Intel P4@3GHZ. Installation messages were: - Error loading Nautilus config info - Replaced customied /etc/login.defs - Replaced customized /etc/dhcp3/dhclient.conf - 189 packages removed - WARNING: Failed to read mirror file When I rebooted, the usual ASUS screen appeared, then "Loading GRUB" then "starting Up..." then "starting Up..." again then a blank screen (the moniter went dormant). I rebooted, started GRUB and selected: version 10.04.3 LTS kernel 2.6.32-35 generic I got the same results. I rebooted, started GRUB and selected: kernel 2.6.24-29 generic Here's what was displayed: udevd [875]: error getting socket: Invalid argument libudev:udev_monitor_new_from_netlink: error getting socket: Invalid argument Segmentation fault **Gave up waiting for root device** Common problems - Boot args (cat/proc/cmdline) - Check root delay - check root - Missing modules (cat/pro/modules; **Alert! /dev/disk/by_vvid/c59c6361 etc... does not exist. Dropping to a shell.** Then Busybox v1.13.3 started with the following prompt (?) (initramfs) _ But my typing did not appear on the screen. It appears the hard drive cannot be found. Any suggestion on how to remedy this? Thank you.

  Read the article

• Feasability of mobile 2D multiplayer RPG game with interactive bitmap background

  - by user2827214

  I'm looking to develop a 2D multiplayer RPG game for Android, with a bird's eye view similar to that of zelda/pokemon. The game is very simple in all ways since my intent is for thousands of players to occupy the same world which I imagine requires good performance. However, I am unsure about the performance requirements of two properties: the tile map that is used as a background is dynamic (interactive). For example, a player steps in the water, and the water turns black. Every tile in the game does this. the tile map is the same object used for all players, but it is displayed differently on each user's mobile device, even though the players exist in the same world. For example, the water that turned black is displayed as red on all other players' screens. I have knowledge of java, but almost none regarding game dev. tools. Is there a best process for these requirements? Should I develop in pure java, or use some tool like Slick2D etc.? How performance intensive are these properties, if even possible? Edit: There are no collisions in the game or difficult animations, I am imagining simply changing the colors of the tiles (like in the examples), and a client-server architecture

  Read the article

• Here Is Official GMail App For iPhones & iPads

  - by Gopinath

  Its a great day for GMail users! Few hours ago Google pushed a new GMail web user interface to all the users and now they released GMail iOS App[iTunes Link]. After delaying several years Google at last released a native GMail application of iPhone, iPad & iPod touch. In a blog post, Google says We’ve combined your favorite features from the Gmail mobile web app and iOS into one app so you can be more productive on the go.It’s designed to be fast, efficient and take full advantage of the touchscreen and notification capabilities of your device. The iOS App includes almost all the features that are found on Android version of GMail app -  users can star, label, archive, access the Priority Inbox and push notifications for new mail alerts. It also includes standard touchscreen commands like pull down to refresh and swipe to scroll emails. Go and grab the GMail App from iTunes This article titled,Here Is Official GMail App For iPhones & iPads, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• BCM4306, b43 legacy driver installed, but "firmware missing" error

  - by ScrollerBlaster

  I have the following wireless hardware on a Compaq evo N600c laptop running lubuntu latest. ciaran@compaq:~$ lspci -vvnn | grep 14e4 03:00.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03) Following the instructions from here : http://www.linuxwireless.org/en/users/Drivers/b43#b43_and_b43legacy I opted for the legacy firmware installer, following instructions for internet install to the letter (with no errors). i.e. I successfully installed sudo apt-get install firmware-b43legacy-installer In the nm-applet I now get Wireless networks device not ready (firmware missing) I open up Additional Drivers, but the list is empty. I have commented out this line in /etc/modprobe.d/blacklist.conf #blacklist bcm43xx Contents of firmware dir: ciaran@compaq:/etc/modprobe.d$ sudo ls /lib/firmware/b43legacy/ [sudo] password for ciaran: a0g0bsinitvals2.fw a0g0initvals5.fw b0g0bsinitvals2.fw b0g0initvals5.fw ucode11.fw ucode5.fw a0g0bsinitvals5.fw a0g1bsinitvals5.fw b0g0bsinitvals5.fw pcm4.fw ucode2.fw a0g0initvals2.fw a0g1initvals5.fw b0g0initvals2.fw pcm5.fw ucode4.fw Edit: from dmesg: [ 4460.193382] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found [ 4460.193393] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found [ 4460.193401] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. Yours in hope.

  Read the article

• How to diagnose network speed drops

  - by Luis Alvarado

  Here is the image of System Monitor first: The graph shows the cycle the connection goes through. After 10 to 15 seconds it drops to 0 KB/S, then goes up to the Max speed (120 KB/S) then it repeats. dmesg shows the following during that time: [ 6066.757211] wlan0: send auth to 00:26:5a:b5:05:7b (try 1/3) [ 6066.804405] wlan0: authenticated [ 6066.804578] rt2800pci 0000:02:01.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 6066.805016] wlan0: associate with 00:26:5a:b5:05:7b (try 1/3) [ 6066.809218] wlan0: RX AssocResp from 00:26:5a:b5:05:7b (capab=0x431 status=0 aid=1) [ 6066.809581] wlan0: associated [ 6066.810203] bridge-eth0: disabling the bridge on dev down [ 6066.810239] bridge-eth0: down [ 6066.810254] bridge-eth0: detached [ 6066.810309] /dev/vmnet: open called by PID 1679 (vmnet-bridge) [ 6066.810322] /dev/vmnet: hub 0 does not exist, allocating memory. [ 6066.810355] /dev/vmnet: port on hub 0 successfully opened [ 6066.810366] bridge-wlan0: device is wireless, enabling SMAC [ 6066.810369] bridge-wlan0: up [ 6066.810372] bridge-wlan0: attached [ 6067.010285] userif-2: sent link down event. [ 6067.010290] userif-2: sent link up event. This also repeats with Wired or Wireless connections. How can I diagnose this changes in the network efficiently.

  Read the article

• CodePlex Daily Summary for Thursday, May 31, 2012

  CodePlex Daily Summary for Thursday, May 31, 2012Popular ReleasesNaked Objects: Naked Objects Release 4.1.0: Corresponds to the packaged version 4.1.0 available via NuGet. Note that the versioning has moved to SemVer (http://semver.org/) This is a bug fix release with no new functionality. Please note that the easiest way to install and run the Naked Objects Framework is via the NuGet package manager: just search the Official NuGet Package Source for 'nakedobjects'. It is only necessary to download the source code (from here) if you wish to modify or re-build the framework yourself. If you do wi...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.54: Fix for issue #18161: pretty-printing CSS @media rule throws an exception due to mismatched Indent/Unindent pair.OMS.Ice - T4 Text Template Generator: OMS.Ice - T4 Text Template Generator v1.4.0.14110: Issue 601 - Template file name cannot contain characters that are not allowed in C#/VB identifiers Issue 625 - Last line will be ignored by the parser Issue 626 - Usage of environment variables and macrosSilverlight Toolkit: Silverlight 5 Toolkit Source - May 2012: Source code for December 2011 Silverlight 5 Toolkit release.totalem: version 2012.05.30.1: Beta version added function for mass renaming files and foldersAudio Pitch & Shift: Audio Pitch and Shift 4.4.0: Tracklist added on main window Improved performances with tracklist Some other fixesJson.NET: Json.NET 4.5 Release 6: New feature - Added IgnoreDataMemberAttribute support New feature - Added GetResolvedPropertyName to DefaultContractResolver New feature - Added CheckAdditionalContent to JsonSerializer Change - Metro build now always uses late bound reflection Change - JsonTextReader no longer returns no content after consecutive underlying content read failures Fix - Fixed bad JSON in an array with error handling creating an infinite loop Fix - Fixed deserializing objects with a non-default cons...Indent Guides for Visual Studio: Indent Guides v12.1: Version History Changed in v12.1: Fixed crash when unable to start asynchronous analysis Fixed upgrade from v11 Changed in v12: background document analysis new options dialog with Quick Set selections for behavior new "glow" style for guides new menu icon in VS 11 preview control now uses editor theming highlighting can be customised on each line fixed issues with collapsed code blocks improved behaviour around left-aligned pragma/preprocessor commands (C#/C++) new setting...DotNetNuke® Community Edition CMS: 06.02.00: Major Highlights Fixed issue in the Site Settings when single quotes were being treated as escape characters Fixed issue loading the Mobile Premium Data after upgrading from CE to PE Fixed errors logged when updating folder provider settings Fixed the order of the mobile device capabilities in the Site Redirection Management UI The User Profile page was completely rebuilt. We needed User Profiles to have multiple child pages. This would allow for the most flexibility by still f...Thales Simulator Library: Version 0.9.6: The Thales Simulator Library is an implementation of a software emulation of the Thales (formerly Zaxus & Racal) Hardware Security Module cryptographic device. This release fixes a problem with the FK command and a bug in the implementation of PIN block 05 format deconstruction. A new 0.9.6.Binaries file has been posted. This includes executable programs without an installer, including the GUI and console simulators, the key manager and the PVV clashing demo. Please note that you will need ...????: ????2.0.1: 1、?????。WiX Toolset: WiX v3.6 RC: WiX v3.6 RC (3.6.2928.0) provides feature complete Burn with VS11 support. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/5/28/WiX-v3.6-Release-Candidate-availableJavascript .NET: Javascript .NET v0.7: SetParameter() reverts to its old behaviour of allowing JavaScript code to add new properties to wrapped C# objects. The behavior added briefly in 0.6 (throws an exception) can be had via the new SetParameterOptions.RejectUnknownProperties. TerminateExecution now uses its isolate to terminate the correct context automatically. Added support for converting all C# integral types, decimal and enums to JavaScript numbers. (Previously only the common types were handled properly.) Bug fixe...callisto: callisto 2.0.29: Added DNS functionality to scripting. See documentation section for details of how to incorporate this into your scripts.Phalanger - The PHP Language Compiler for the .NET Framework: 3.0 (May 2012): Fixes: unserialize() of negative float numbers fix pcre possesive quantifiers and character class containing ()[] array deserilization when the array contains a reference to ISerializable parsing lambda function fix round() reimplemented as it is in PHP to avoid .NET rounding errors filesize bypass for FileInfo.Length bug in Mono New features: Time zones reimplemented, uses Windows/Linux databaseSharePoint Euro 2012 - UEFA European Football Predictor: havivi.euro2012.wsp (1.1): New fetures:Admin enable / disable match Hide/Show Euro 2012 SharePoint lists (3 lists) Installing SharePoint Euro 2012 PredictorSharePoint Euro 2012 Predictor has been developed as a SharePoint Sandbox solution to support SharePoint Online (Office 365) Download the solution havivi.euro2012.wsp from the download page: Downloads Upload this solution to your Site Collection via the solutions area. Click on Activate to make the web parts in the solution available for use in the Site C...ScreenShot: InstallScreenShot: This is the current stable release.????SDK for .Net 4.0+(OAuth2.0+??V2?API): ??V2?SDK???: ?????????API?? ???????OAuth2.0?? ????：????????????，??????????“SOURCE CODE”?????????Changeset，http://weibosdk.codeplex.com/SourceControl/list/changesets ???：????????，DEMO??AppKey????????????????，?????AppKey，????AppKey???????????，?????“????>????>????>??????”.Net Code Samples: Code Samples: Code samples (SLNs).LINQ_Koans: LinqKoans v.02: Cleaned up a bitNew ProjectsAAABBBCCC: hauhuhaAutomação e Robótica: Sistema de automação e robótica de periféricos. todo o projeto consiste em integrar interface de controle pelo software do hardware para realização de comando e acionamentos eletricos e eletromecânicos.Barium Live! API Client: Simple test client for the Barium Live! REST API Contact Barium Live! support on http://www.bariumlive.com/support to get an API key for development. Please note that the test client has a dependency to the Newtonsoft Json.NET library that has to be downloaded separately from http://json.codeplex.com/BizTalk Host Restarter: This is a quick tool that I wrote to more quickly Stop, Start and Restart the BizTalk Host instances. It's command line, with full source code, I use it in my build scripts and deploy scripts, works a treat. MUCH faster than the BizTalk Admin Console can do the same task. CNAF Portal: CNAFPortalConsulta_Productos: Nos permite ingresar un código del 1 al 10..... y al dar clic en buscar nos aparecerá un mensaje con el nombre del producto de dicho código.Deployment Tool: Deployement is a small piece in our IT lifecycle for many small projects. But, considering that you are working for a large project, it has many servers, softwares, configurations, databases and so on. The problem emits, even you have upgrades and version controls. The deploymentool is a solution which can help you resolve the difficulties described above.Devmil MVVM: A toolset for MVVM development with focus on INotifyPropertyChanged and dependenciesEAL: no summaryEasyCLI: EasyCLI is a command shell for the Commodore 64 computer. EasyCLI is packaged as an EasyFlash cartridge.ExcelSharePointListSync: This tool help is Getting Data Form SharePoint to Excel 2010 , Following are the silent feature : 1) Maintain a List connection Offline 2) Choose to get data Form a View of Form Columns 3) Sync the data Back to SharePoint GH: Some summaryicontrolpcv: icontrolpvcLotteryVoteMVC: LotteryVote use mvcMail API for Windows Phone 7: Library that allows developers to add some email functionality to their application, like sending and reading email messages, with the capability of adding attachments to the messages. Matchy - Fashion Website: Fashion website for Match Brand, a fashion brand of BOOM JSC.,MIracLE Guild Admin System: asdOrchard Content Picker: Orchard Content Picker enables content editor to select Content Items.ProSoft Mail Services: This project implements a mail server that allows sending mail with SMTP and access the mailbox via POP. Later on, the server also get a MAPI interface and an interface for SPAM defense.Silver Sugar Web Browser: This is a simple web browser named "Silver Sugar". It has a back button, forward button, home button, url text box and a go button.social sdk for windows phone: Windows Phone Social Share Lib. (Including Weibo, Tencent Weibo & Renren)SolutionX: dfsdf asdfds asdfsdf asdfsdfspUtils: This project aims to facilitate easy to use methods that interact with SharePoint's Client OM/JSOM.Streambolics Library: A library of C# classes providing robust tools for real-time data monitoringTestExpression: TestExpressionTFS Helper package: VS2010 is well integrated to TFS and has all the features required on day to day basis. Most common feature any developer use is managing workitems. Creating work items is very easy as is copying work items, but what I need is to copy workitem between projects retaining links and attachments. I am sure this is not Ideal and against sprint projects.Ubelsoft: Sistema de Registro Eletrônico de Ponto - SREPZombieSim: Simulate the spread of a zombie virusZYWater: ......................

  Read the article

• a little code to allow word substitution depending on user

  - by Fred Quimby

  Can anyone help? I'm creating a demo web app in html in order for people to physically see and comment on the app prior to committing to a proper build. So whilst the proper app will be database driven, my demo is just standard html with some javascript effects. What I do want to demonstrate is that different user group will see different words. For example, imagine I have an html sentence that says 'This will cost £100 to begin'. What I need to some way of identifying that if the user has deemed themselves to be from the US, the sentence says 'This will cost $100 to begin'. This requirement is peppered throughtout the pages but I'm happy to add each one manually. So I envisage some code along the lines of 'first, remove the [boot US] trunk' where the UK version is 'first remove the boot' but the code is saying that the visitor needs the US version. It then looks up boot (in an Access database perhaps) and sees that the table says for boot for US, display 'trunk'. I'm not a programmer but I can normally cobble together scripts so I'm hoping someone may have a relatively easy solution in javascrip, CSS or asp. To recap; I have a number of words or short sentences that need to appear differently and I'm happy to manually insert each one if necessary (but would be even better if the words were automatically changed). And I need a device which allows me to tell the pages to choose the US version, or for example, the New Zealand version. Thanks in advance. Fred

  Read the article

• Virtualbox shared folder mount from fstab fails; works once bootup is complete

  - by Ben

  I've got Ubuntu 13.10 installed in Virtualbox 4.3. The host machine is Windows. I have a couple of Virtualbox shared folders being mounted by /etc/fstab. Until recently this setup worked just fine, but after upgrading from Ubuntu 13.04 and Virtualbox 4.2 (at essentially the same time) the fstab mounting stopped working. I get the following error during boot: An error occurred while mounting /home/benme/Documents. keys:Press S to skip mounting or M for manual recovery Pressing M for manual recovery and then trying to mount manually also fails: root@benme-vb:~# cd /home/benme root@benme-vb:/home/benme# mount Documents /sbin/mount.vboxsf: mounting failed with the error: No such device But if I instead skip mounting during boot, wait for Unity to start and then mount manually in a shell, everything works fine: benme-vb ~ % ls Documents benme-vb ~ % sudo mount Documents [sudo] password for benme: benme-vb ~ % ls Documents # actual file list omitted Note that when I mount manually I'm letting mount take all the options from /etc/fstab, and it works. This suggests to me that it's some sort of timing issue, where Virtualbox isn't "ready" to provide the shared file mounts at the point /etc/fstab mounts are run during bootup. Here's the fstab line, just for completeness: Documents /home/benme/Documents vboxsf uid=benme,gid=benme,dmode=774,fmode=664 0 0 Is there something I can do about this from the Ubuntu side? Or does anyone happen to know more about this from the Virtualbox angle? I've found an old report on the Virtualbox bug-tracker with identical symptoms, but in that case the user had updated Virtualbox without updating their guest additions and resolving that fixed the problem; this isn't happening here, I've definitely got the 4.3 guest additions installed.

  Read the article

< Previous Page | 391 392 393 394 395 396 397 398 399 400 401 402  | Next Page >