Search Results

Search found 28441 results on 1138 pages for 'ubuntu lts'.

Page 398/1138 | < Previous Page | 394 395 396 397 398 399 400 401 402 403 404 405  | Next Page >

• Multiple interfaces to one IP address?

  - by Delan Azabani

  At present, I have: a Netgear router with DHCP off at 192.168.0.1 my computer eth0 at 192.168.0.2 wlan0 at 192.168.0.2 The wlan0 interface always connects to the router, while the eth0 interface connects to other computers with crossover and acts as a dnsmasq DHCP server for network boot and installation. If I use the Gnome NetworkManager to enable both connections, that is, with wlan0 connected to the router/internet and eth0 to another computer, both as 192.168.0.2, I cannot access the internet while eth0 is connected. Why is this? How can I configure my computer to follow wlan0 for Internet usage, but use eth0 for itself (the latter is working but blocking wlan0).

  Read the article

• postfix system "mail name"

  - by Errol Gongson

  I am installing postfix and I am confused what to put for the system mail name. It has an exmaple that sais use "example.org" if a mail address on the system is "[email protected]" but it also sais that the mail name should be the FQDN. my hostname is "mercury" and my FQDN is "mercury.pacificseatheat.org", so should I use "pacificseatheat.org" or "mercury.pacificseatheat.org" for the system mail name? Thanks

  Read the article

• I run a command twice - I'm wondering if it'll be a problem

  - by Delirium tremens

  "In computing, tee is a command in various command-line interpreters (shells) such as Unix shells, 4DOS/4NT and Windows PowerShell, which displays or pipes the output of a command and copies it into a file or a variable. It is primarily used in conjunction with pipes and filters." I run echo FRAMEBUFFER=y | sudo tee /etc/initramfs-tools/conf.d/splash twice. I opened the conf.d folder in Nautilus, but there isn't a splash file nor directory. I expected a file to be there with FRAMEBUFFER=y inside but there isn't. Is this going to be a problem?

  Read the article

• VPN, routing, specified application

  - by Adrian

  Details: eth0 = current internet port pptp1 = VPN connection, if I connect to my provider, he give me an IP address, which is accessible from the internet. This is what I need. I want to connect through this IP back to my PC. I want to keep my primary internet connection (eth0) on my PC for all traffic, but route traffic to VPN for specified application/or port, to access application/port from the IP, which I given from the pptp provider. Huhh? Difficult but, it is possible? If yes, how? Incoming port will be always: 33340 Outgoing port can be change, but usually it is 33330

  Read the article

• Cutting Ubuntu to the bone for Virtualbox VM

  - by user32853

  I've been looking around for a Linux variant which will install only the software I need rather than everything Ubuntu (for example) puts in by default. This is to create a virtual machine in Virtualbox which has bash, apache, python, perl, SQLite, openssh and a few other programs but nothing else. I'd prefer to go with Ubuntu if possible but another modern distro would do as well (I like using apt-get and yum rather than downloading/compiling etc). So far, I've tried: SuseStudio.com, which is probably the best so far. Pressing F4 to get the boot options on Ubuntu 9.10, but there is no minimal installation (I think there was once). Arch Linux, slightly confusing install procedure but I might go back and try again. Gentoo, started well but fairly soon the HD on the virtual machine went to 2Gb, even before the installation had started in earnest (I'd partitioned the disks is all). I realise there are various "small" Linuxes around like Puppy, Feather, DSL, etc, but they seem to be aimed at desktop users or as a techie's toolkit, and I want a small-as-possible server distro which can be managed with tools like apt or yum or similar. TIA for any advice you can offer! -- Monty

  Read the article

• Need Help with fixing permissions in mounted Drive

  - by Master

  I am trying a lot still my problem is not solved. I have a partion called Server and inside it i have 5 folders like Folder 1 FOlder 2 Folder 3 I am mounting the drive on startup by using following command as told to me by some senoir members and it works but with some problems /dev/sdb1 /media/Server ntfs defaults,umask=006,fmask=000,dmask=007,uid=1000,gid=1001 0 0 The problem is with this command the permission are applied to all folders like Folder 1 , Folder 2 , FOlder3 But i want that only FOlder 3 should be publicly readable and writable while all other should be private and no one should have access to that. How can i achieve that

  Read the article

• Customize autoindent settings in VIMRC file

  - by Shane Reustle

  I have autoindent enabled in my .vimrc file but have run into an annoying bug/feature. For example, when I'm tabbed in 3 times, and I hit return, the new line is also tabbed in 3 times. Then when I hit enter again, that new line is also indented 3 times, as it should. The problem occurs when I go back up to the previous line (the first of the 2 new lines). VIM automatically removes the whitespace because it saw it as an empty line. Is there a way to disable this from happening? I'd like to be able to back to coding like this: function test(){ <return> <return> } <up> <right> Thanks!

  Read the article

• Do I need to restart my server after editing fstab and mtab?

  - by jaypabs

  I'm just wondering if I need to restart my server after editing fstab and mtab. I changed something in this file manually due to problem with awstats report. I am using ISPConfig 3 with the help of the tutorial from howtoforge. But due to removing/deleting of some account, the configuration of fstab and mtab messed up. I also ask this question at howtoforge forum but until now no one has answered. If you'd like to read my question please visit it here. I tried very hard to fix the problem w/o luck. Update: Here's what happen to my fstab: Before the value was (I omitted the other): /var/log/ispconfig/httpd/mydomain.com /var/www/clients/client1/web1/log none bind,nobootwait 0 0 /var/log/ispconfig/httpd/example.com /var/www/clients/client1/web2/log none bind,nobootwait 0 0 So I changed it to the correct path: /var/log/ispconfig/httpd/mydomain.com /var/www/clients/client1/web2/log none bind,nobootwait 0 0 /var/log/ispconfig/httpd/example.com /var/www/clients/client1/web3/log none bind,nobootwait 0 0 I also found mtab to have the same value as above that's why I edited it manually. from: /var/log/ispconfig/httpd/mydomain.com /var/www/clients/client1/web1/log none rw,bind 0 0 /var/log/ispconfig/httpd/example.com /var/www/clients/client1/web2/log none rw,bind 0 0 to: /var/log/ispconfig/httpd/mydomain.com /var/www/clients/client1/web2/log none rw,bind 0 0 /var/log/ispconfig/httpd/example.com /var/www/clients/client1/web3/log none rw,bind 0 0 I edited those value because the correct path of mydomain.com and example.com should be under web2 and web3 folder respectively. As of now the log of example.com is pointed to: /var/www/clients/client1/web2/log when it should be: /var/www/clients/client1/web3/log So I am thinking that this is because of fstab and mtab. Please guide me how to point the log correctly to it's default directory. I explain the scenario one by one at this link. to dawud: Based on your example mount -o remount,noexec /var, should I run mount -o remount,noexec /var/log/ispconfig/httpd/example.com?

  Read the article

• Is there a way to install Ubuntu stripped down without desktop applications?

  - by Nick Berardi

  Just to start off, I know of lubuntu but it really doesn't meet what I am looking for. Basically what I am looking for is the standard Desktop Ubuntu install, but with out all the word processing, multimedia, and games installed. I have seen posts out about how to get the desktop environment running on Ubuntu server, but they seem complicated, and never seem to equal the standard Desktop install. So my question is, is there anyway to tell the standard Desktop install not to install all the applications? Or is there a distro available that leaves all the applications out, and just has the standard desktop look and feel? What I really want this for is, is for development purposes to run on a VM to do Mono development.

  Read the article

• Log Files from bash script output

  - by neildeadman

  I have a script that runs (this works fine). I'd like to produce logfiles from its output and still show it on screen. I have this command that creates three files from this blog: ((./fk.sh 2>&1 1>&3 | tee errors.log) 3>&1 1>&2 | tee output.log) 2>&1 | tee final.log This does exactly what I want it to. My only issue is that I create files in my script and copy them somewhere, and I'd like to copy these logfiles there too, which I can't do whilst this script is running. I also wanted to make it easier for any user to run my script, so I created another script to run this script. According to this post (see last post) I can put a . before the script name and I can use variables assigned in my called script from the first script if I use them in the first. It doesn't seem to work though and I can't figure out why or find alternative methods. Can anyone help?

  Read the article

• Disable disk caches in AWS EBS for PostgreSQL?

  - by Alexandr Kurilin

  It's my understanding that, without correctly disabling OS-level and drive-level caching, there is a chance that in case of system failure the Write-Ahead Log might not be saved correctly and in fact might get corrupted, possibly preventing data recovery. I've already made sure that wal_sync_method=fdatasync however I was unable to make any configuration changes with hdparm since I get the following: $ sudo htparm -I /dev/xvdf /dev/xvdf: HDIO_DRIVE_CMD(identify) failed: Invalid argument Looks like that option is not available in the kind of setup you get in EC2. Am I missing anything here? Are there any other obvious caches I have to disable to ensure the WAL's safety?

  Read the article

• 16 Slick Ubuntu Lucid Wallpapers From Around The Web

  <b>Tech Drive-in: </b>"Here is some more eyecandy coming your way. Collection of 16 beautiful made-for-lucid wallpapers from around the web."

  Read the article

• GNU Screen: Combining split-regions and full-screen sessions

  - by scrrr

  Let's say I have three sessions: 0, 1 and 2 I'm on session 0 and I press CTRL-A S to split the screen. Then I select session 1 for the bottom split region, while 0 is in the upper. Can I switch to session 2 and have it display in full-screen while 0 and 1 remain split? If I CTRL-A n to other sessions in a split screen it only changes the split-region. I want some sessions to be full-screen though. Is that possible?

  Read the article

• How can I fix a broken AVI file?

  - by KeyboardMonkey

  I have a broken AVI, it won't play in VLC, Xine or MPlayer. I tried Handbrake (reads the file and resets the source to None), OggConvert, Avidemux and mencoder fail to read the file, I cannot seem to reencode this file. I suspect the header info is corrupt, is there a way to get the a/v streams out with a missing header?

  Read the article

• /usr/bin/sshd isn't linked against PAM on one of my systems. What is wrong and how can I fix it?

  - by marc.riera

  Hi, I'm using AD as my user account server with ldap. Most of the servers run with UsePam yes except this one, it has lack of pam support on sshd. root@linserv9:~# ldd /usr/sbin/sshd linux-vdso.so.1 => (0x00007fff621fe000) libutil.so.1 => /lib/libutil.so.1 (0x00007fd759d0b000) libz.so.1 => /usr/lib/libz.so.1 (0x00007fd759af4000) libnsl.so.1 => /lib/libnsl.so.1 (0x00007fd7598db000) libcrypto.so.0.9.8 => /usr/lib/libcrypto.so.0.9.8 (0x00007fd75955b000) libcrypt.so.1 => /lib/libcrypt.so.1 (0x00007fd759323000) libc.so.6 => /lib/libc.so.6 (0x00007fd758fc1000) libdl.so.2 => /lib/libdl.so.2 (0x00007fd758dbd000) /lib64/ld-linux-x86-64.so.2 (0x00007fd759f0e000) I have this packages installed root@linserv9:~# dpkg -l|grep -E 'pam|ssh' ii denyhosts 2.6-2.1 an utility to help sys admins thwart ssh hac ii libpam-modules 0.99.7.1-5ubuntu6.1 Pluggable Authentication Modules for PAM ii libpam-runtime 0.99.7.1-5ubuntu6.1 Runtime support for the PAM library ii libpam-ssh 1.91.0-9.2 enable SSO behavior for ssh and pam ii libpam0g 0.99.7.1-5ubuntu6.1 Pluggable Authentication Modules library ii libpam0g-dev 0.99.7.1-5ubuntu6.1 Development files for PAM ii openssh-blacklist 0.1-1ubuntu0.8.04.1 list of blacklisted OpenSSH RSA and DSA keys ii openssh-client 1:4.7p1-8ubuntu1.2 secure shell client, an rlogin/rsh/rcp repla ii openssh-server 1:4.7p1-8ubuntu1.2 secure shell server, an rshd replacement ii quest-openssh 5.2p1_q13-1 Secure shell root@linserv9:~# What I'm doing wrong? thanks. Edit: root@linserv9:~# cat /etc/pam.d/sshd # PAM configuration for the Secure Shell service # Read environment variables from /etc/environment and # /etc/security/pam_env.conf. auth required pam_env.so # [1] # In Debian 4.0 (etch), locale-related environment variables were moved to # /etc/default/locale, so read that as well. auth required pam_env.so envfile=/etc/default/locale # Standard Un*x authentication. @include common-auth # Disallow non-root logins when /etc/nologin exists. account required pam_nologin.so # Uncomment and edit /etc/security/access.conf if you need to set complex # access limits that are hard to express in sshd_config. # account required pam_access.so # Standard Un*x authorization. @include common-account # Standard Un*x session setup and teardown. @include common-session # Print the message of the day upon successful login. session optional pam_motd.so # [1] # Print the status of the user's mailbox upon successful login. session optional pam_mail.so standard noenv # [1] # Set up user limits from /etc/security/limits.conf. session required pam_limits.so # Set up SELinux capabilities (need modified pam) # session required pam_selinux.so multiple # Standard Un*x password updating. @include common-password Edit2: UsePAM yes fails With this configuration ssh fails to start : root@linserv9:/home/admmarc# cat /etc/ssh/sshd_config |grep -vE "^[ \t]*$|^#" Port 22 Protocol 2 ListenAddress 0.0.0.0 RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys ChallengeResponseAuthentication yes UsePAM yes Subsystem sftp /usr/lib/sftp-server root@linserv9:/home/admmarc# The error it gives is as follows root@linserv9:/home/admmarc# /etc/init.d/ssh start * Starting OpenBSD Secure Shell server sshd /etc/ssh/sshd_config: line 75: Bad configuration option: UsePAM /etc/ssh/sshd_config: terminating, 1 bad configuration options ...fail! root@linserv9:/home/admmarc#

  Read the article

• How to configure VNC on a remote Ubuntu server?

  - by Jason H.

  I am currently in the process of creating a Ubuntu server with Rackspace cloud and I am trying to configure this server for VNC over SSH on my MacBook Air. Here is a summary of what I am trying to accomplish. Server Details: Ubuntu 12.04 Hosted by RackSpace (no physical access) Need to run Gnome3 VNC connection must be over SSH Any guides or assistance would be great, I have installed Gnome3 and Vino for the VNC-server. I'm just not sure how to configure VNC properly. I've looked online but I'm stuck at the VNC-server portion.

  Read the article

• Can I create an SSH user which can access only certain directory?

  - by RiMMER

  I have a Virtual Private Server which I can connect to using SSH with my root account, being able to execute any linux command and access all the disk area, obviously. I would like to create another user account, which would be able to access this server using SSH too, but only to a certain directory, for example /var/www/example.com/ For example, imagine this user has a HUGE error.log file (500 MB) located in /var/www/example.com/logs/error.log When accessing this file using FTP, this user needs to download 500 MB to view the last lines of the log, but I'd like him to be able to execute something like this: tail error.log Therefore I need him to be able to access the server using SSH, but I don't want to grant him access to all server areas. How can I do this?

  Read the article

• tcpsndbuf high fail count

  - by Matthew Crenshaw

  I've got a small setup, one machine that acts as a load balancer and two machines that do all the work. The load balancer runs nginx (static content + php proxying to workers) and mysql, the two workers run php5-fpm and memcached (pooled between workers). Here's beancounters for the balancer: tcpsndbuf 2171848 2386280 10000000 20000000 3947733 tcprcvbuf 1248288 1669504 10000000 20000000 0 Here's worker 1: tcpsndbuf 951976 1262672 20000000 40000000 0 tcprcvbuf 278528 393496 20000000 40000000 0 Here's worker 2: tcpsndbuf 989888 527472 20000000 40000000 0 tcprcvbuf 212992 452520 20000000 40000000 0 The balancer has 1GB ram, the two workers have 2GB ram each. What is eating my send buffer?

  Read the article

• Directory Not Found Error

  - by noobguy

  I am trying to verify tails and when I get to the command prompt portion of the verification some difficulties seem to have arose. Below is the script: noob@noob-System-Product-Name:~$ cd [/media/noob/UUI] bash: cd: [/media/noob/UUI]: No such file or directory noob@noob-System-Product-Name:~$ gpg --keyid-format long --import tails-signing.key gpg: can't open `tails-signing.key': No such file or directory gpg: Total number processed: 0 Same thing happens when I try from download directory; noob@noob-System-Product-Name:~$ cd [/home/noob/Downloads] bash: cd: [/home/noob/Downloads]: No such file or directory noob@noob-System-Product-Name:~$ gpg --keyid-format long --import tails-signing.key gpg: can't open `tails-signing.key': No such file or directory gpg: Total number processed: 0 Any suggestions would be greatly appreciated.

  Read the article

• Enabling vim file type plugin

  - by person

  In my .vimrc file I have this line.. filetype plugin indent on and then in ~/.vim/ftplugin/py.vimrc (I've also tried saving it as a .vim file) I've copied and pasted a vimrc file for python standards and have enabled all of the suggested settings in it (uncommented them). When I create and open a test.py file and do something like a tab, it goes 8 spaces instead of 4. Not sure what's going wrong.

  Read the article

• safeboot and wubi

  - by G S

  Hi, Having read various posts it seems clear that installing Wubi on a machine which already has safeboot installed with disk encryption is a non-starter at the moment - nor is repartitioning the disk it would seem. However while the c: partion is encrypted - it has an NTFS formatted q: partition that is not encrypted and has about 4GB free - so I was wondering if there was any way to install WUBI using that partion. Obvisouly stil need a means of booting into it without stuffing my safeboot booting mechanism. I'm thinking that this should be possible as the safeboot booting mechanism will get me to the boot choice options and thereafter all references in the boot.ini entry for the wubi installtion should be to files on the non-encrypted NTFS partion and so it should be OK and not attempt any changes to my envrypted c: partion (other than adding the extra entry to boot.ini) ? any thoughts? ta

  Read the article

• How to adjust TouchPad edge scroll area in Ubuntu?

  - by MikeVB

  I have an Acer Aspire that I have dual booting XP and Ubuntu. On the Windows side, the driver allows you to set how close your finger has to be to the edge of the TouchPad before it goes into scroll mode. In Ubuntu I don't have the option (at least in the GUI) to change the scroll area on the pad. Is there a conf file or other way to change this? I'm constantly getting into the scroll area during normal usage. I would like to leave it on without losing so much pad area to the scroll feature.

  Read the article

• Only One GPU Detected in the Nvidia Quadra NVS 450

  - by Kyle Brandt

  I just built myself an new workstation and now only 2 of 3 monitors are working. I built the nvidia driver by downloading it and installing with ./Nvidia... Before when I ran nvidia-settings I saw two GPUs listed but now I only see one. Xorg Config (Not sure how I ended up with 3 devices in there): # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:39 PDT 2010 Section "ServerLayout" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+275, DFP-3: nvidia-auto-select +1680+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-3" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-3: nvidia-auto-select +1680+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "DFP-3: nvidia-auto-select +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection lscpi: 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:10.0 PIC: Intel Corporation 5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13) 00:10.1 PIC: Intel Corporation 5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13) 00:11.0 PIC: Intel Corporation 5520/5500 Physical and Link Layer Registers Port 1 (rev 13) 00:11.1 PIC: Intel Corporation 5520/5500 Routing & Protocol Layer Register Port 1 (rev 13) 00:13.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:15.0 PIC: Intel Corporation 5520/5500/X58 Trusted Execution Technology Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 01:00.0 IDE interface: Device 1b4b:91a3 (rev 11) 02:00.0 USB Controller: NEC Corporation Device 0194 (rev 03) 03:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:02.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 05:00.0 3D controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 06:00.0 VGA compatible controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 08:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 08:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0b:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

  Read the article

• Transmission-daemon not picking up on watch directory

  - by Mild Fuzz

  Trying to get my transmission-daemon to pick up files from a dropbox folder, to make remote starting easier (it's a headless system). As far as I can tell, the settings.json file is as expected, but none of the files I place in the folder get picked up. I have checked that dropbox is syncing correctly. Here is the whole settings.json file, but the relevant lines are included below: "watch-dir": "/home/john/Dropbox/torrents", "watch-dir-enabled": true Update It appears to be a permissions issue. From /var/log/syslog: Unable to watch "/home/john/Dropbox/torrents": Permission denied (watch.c:79) I have tried stopping the daemon - sudo service transmission-daemon stop - changing permissions of folder using chown - sudo chown -R john /home/john/Dropbox/torrents - restarting daemon - sudo service transmission-daemon start Same result, however Update 2 Permissions for the folder are: drwsrwsrwx 2 john debian-transmission 4096 2012-04-09 19:40

  Read the article

• One incorrect SSH login attempt locks me out for an hour...

  - by Legend

  I've never observed this problem neither did any of my colleagues trying to SSH into the same system. If I try logging into my server using a wrong username and then press ^C to terminate or exhaust my password attempts, I am locked out for at least an hour. Is there something I can do on my end to fix this problem?

  Read the article

< Previous Page | 394 395 396 397 398 399 400 401 402 403 404 405  | Next Page >