Search Results

Search found 48592 results on 1944 pages for 'cannot start'.

Page 399/1944 | < Previous Page | 395 396 397 398 399 400 401 402 403 404 405 406  | Next Page >

• Vista locks up after ~10h. of activity

  - by Naomi

  Hi everybody, I am experiencing a problem: Windows Vista completely freezes/locks up lately... It happened today twice - the mouse and keyboard stopped responding and I had to re-boot. I checked the Application Events Log and I see these two errors: Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected. and then The following boot-start or system-start driver(s) failed to load: SASDIFSV SASKUTIL I checked Help online and it points to http://technet.microsoft.com/en-us/library/cc756390%28WS.10%29.aspx and suggests Updating the drivers. I'm not sure why would I have problem with drivers and if so, how can I find out which drivers to update? Can you please help me? Thanks in advance.

  Read the article

• Is there a "Run Level Configurator" for Windows XP?

  - by djangofan

  I have been having trouble with something causing my Windows XP system to take 6-8 minutes to startup from a cold boot. Something is happening during startup that is causing the system to crawl. I have a lot of Linux experience , especially configuring run levels so that some programs start before others do. I also know how to do that on Windows XP but its really complex, and with 50 services I'd have to keep a giant spreadsheet to keep it all organized. Is there such a thing as a Windows XP Tool that "emulates" the Linux run-level editors that I can use to control the order than services start on my system?

  Read the article

• Windows 8.1 Search does not automatically select first search match

  - by Miguel Sevilla

  When I search in Windows 8/8.1 (start menu-start typing), it doesn't automatically highlight the search term. For example, if I'm trying to open the "Internet Options" panel and type the entire thing out in search, I have to down arrow or tab to the "Internet Options" search result. This is retarded. I'm used to Windows 7 style search where the first match is highlighted and i can easily just hit return. First match highlighting does work for other built-in things like "Control Panel", but it should work for all things in general, as it did in Windows 7 search. Anyways, if there is an option to enable this in Windows 8/8.1, I'd appreciate the tip. Thanks!

  Read the article

• How to use WeirdX applet instead of X11 for remote connections in Mac OS X?

  - by penyuan

  When I am away, I've got an Apple PowerBook set up to use X11 forwarding with SSH to connect to a remote iMac in my room. Whenever I start X client programs on the client iMac, X11 would start on my PowerBook, which is OK. Question: Is it possible to change my settings so that the WeirdX applet I have on my PowerBook will take care of the X client programs instead of the default X11? Is there a config file I can edit to chance the $DISPLAY variable, and what should I set it to? Is this even the issue? Thank you very much.

  Read the article

• sudo midnight commander

  - by mit

  I sometimes start midnight commander as superuser with the command sudo mc to do some operations on the current working directory as superuser. But this results in ~/.mc having the wrong permissions, which I need to fix manually. Any solution? Edit: I accepted an answer. I want to further add, that .mc is a directory, so my solution goes like this: $ cd ~ ~$ sudo chown -R mit.mit .mc ~$ chmod 775 .mc ~$ cd .mc ~$ chmod -R 664 .mc ~/.mc$ chmod 775 cedit It seems not to be a good idea after installing mc to use sudo on its first start .

  Read the article

• Linux not picking up new partition correctly on emc pseudo device

  - by James

  Hi We have a database server running oracle rac. We were recently running out of space on the main LUN that it is attached to. I created a new 100GB LUN and concatenated this onto the existing LUN creating a new MetaLUN. After some messing I managed to get linux to recognise the new space. I then created a new partition in on the pseudo device, to use the new space. Previously when I have done this on other system the next step is to create an ASM disk on the new partition and add this disk to the oracle disk group. This however fails. I am aware of various issues with ASM and powerpath, but I don't think this is the issue here. As on while investigating the issue I discovered that one of the underlying logical device is not reflecting the size change. See below; Powermt displays all of the underlying logical units [root@XXXXX~]# powermt display dev=emcpowerd Pseudo name=emcpowerd CLARiiON ID=CKM00091500009 [VFRAC2] Logical device ID=6006016030312200787502866C65DE11 [LUN 30] state=alive; policy=CLAROpt; priority=0; queued-IOs=0 Owner: default=SP A, current=SP A Array failover mode: 1 ============================================================================== ---------------- Host --------------- - Stor - -- I/O Path - -- Stats --- ### HW Path I/O Paths Interf. Mode State Q-IOs Errors ============================================================================== 3 qla2xxx sde SP A0 active alive 0 0 3 qla2xxx sdj SP B0 active alive 0 0 4 qla2xxx sdo SP A1 active alive 0 0 4 qla2xxx sdt SP B1 active alive 0 0 Fdisk on the pseudo device shows correct space. [root@XXXXX ~]# fdisk -l /dev/emcpowerd Disk /dev/emcpowerd: 429.4 GB, 429496729600 bytes 255 heads, 63 sectors/track, 52216 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/emcpowerd1 1 39162 314568733+ 83 Linux /dev/emcpowerd2 39163 52216 104856255 83 Linux fdisk on one of the logical units is wrong [root@XXXXX~]# fdisk -l /dev/sde Disk /dev/sde: 322.1 GB, 322122547200 bytes 255 heads, 63 sectors/track, 39162 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sde1 1 39162 314568733+ 83 Linux /dev/sde2 39163 52216 104856255 83 Linux fdisk on the rest of the units is fine [root@XXXXX ~]# fdisk -l /dev/sdj Disk /dev/sdj: 429.4 GB, 429496729600 bytes 255 heads, 63 sectors/track, 52216 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdj1 1 39162 314568733+ 83 Linux /dev/sdj2 39163 52216 104856255 83 Linux Also when I created the the partition linux did not create the any entries in the /dev directory for the second partition so I created these manually [root@XXXXX dev]# mknod sde2 b 8 66 [root@XXXXX dev]# ls -al sd[ejot]? brw-r----- 1 root disk 8, 65 Dec 29 14:20 sde1 brw-r--r-- 1 root disk 8, 66 Apr 8 20:31 sde2 brw-r----- 1 root disk 8, 145 Dec 29 14:19 sdj1 brw-r--r-- 1 root disk 8, 146 Apr 8 20:33 sdj2 brw-r----- 1 root disk 8, 225 Apr 6 23:12 sdo1 brw-r--r-- 1 root disk 8, 226 Apr 8 20:33 sdo2 brw-r----- 1 root disk 65, 49 Dec 29 14:19 sdt1 brw-r--r-- 1 root disk 65, 50 Apr 8 20:33 sdt2 This is a production server that we cannot easily reboot. Any ideas would be much appreciated. J

  Read the article

• VMware Workstation 7.x error loading operating system help

  - by StealthRT

  Hey all i am using the windows verison of VMware Workstation 7.x and I am getting this error when i start my VM error loading operating system That only started to happen when i tried to load that vmdk file into the program VirtualBox. Prior to this it ran just fine. Ever since then i have been unable to start it in VMware Workstation 7.x... I've already tried to repair the vmdk file but when i do it tells me there are no errors found? I used vmware-vdiskmanager.exe -R "c:\blah\my vm disk.vmdk" Anyone else have any more suggestions i could try? It's a 300+GB VM so i really don't want to lose it!!! Thanks, David

  Read the article

• Using XFCE4 with awesome

  - by whitequark

  When I got tired of using the standard XFCE window manager, xfwm, I simply installed openbox and selected "XFCE/Openbox" session in the GDM login screen. This was very convenient because I didn't want the plain Openbox session in which there are no network-manager, no panels, nothing. Now I have installed awesome: I really like the idea of tiling window managers. But after I launched it, everything went wrong. Absence of XFCE panels isn't anything bad, but subpixel-aliased fonts were somehow turned on, and that was really awful. I tried to login in XFCE, kill openbox/xfwm and start awesome, but that didn't worked: xfce4-session keeps restarting it's predefined WM, and killing it kills the whole X session too. And I didn't found the configuration for a dropdown list in GDM either. How can I start XFCE session with awesome as a WM?

  Read the article

• Permission denied message when starting gfs2

  - by sashang

  Can anyone please explain why I get this permission denied error? I try starting the script and it fails with a permission denied message. So I create a copy of it and run that instead and that works. [root@node2 ~]# /etc/init.d/gfs2 stop Unmounting GFS2 filesystem (/drbd): [ OK ] [root@node2 ~]# /etc/init.d/gfs2 start Mounting GFS2 filesystem (/drbd): gfs_controld join connect error: Permission denied error mounting lockproto lock_dlm [FAILED] [root@node2 ~]# cp /etc/init.d/gfs2 /etc/init.d/gfs2_test [root@node2 ~]# /etc/init.d/gfs2_test start Mounting GFS2 filesystem (/drbd): [ OK ] [root@node2 ~]# [root@node2 ~]# ls -l /etc/init.d/gfs2* -rwxr-xr-x. 1 root root 3365 Jan 15 12:11 /etc/init.d/gfs2 -rwxr-xr-x. 1 root root 3365 Jan 15 12:19 /etc/init.d/gfs2_test [root@node2 ~]#

  Read the article

• How to use the AWUS036H on MacBook Pro with Lion and Backtrack in VM?

  - by Swader

  I have the AWUS036H USB WiFi adapter and have recently upgraded the OSX to Lion. The thing is, there are no drivers for Lion for the AWUS036H, and I would have to boot into 32bit mode every time I want to launch the adapter as per instructions here: http://www.youtube.com/watch?v=n9_HAGi1ce0 I also want to install BackTrack as I deal in networks a lot for my company. While this would be a simple matter on any other laptop, the company issued Macbook does not allow booting into any OS other than MacOSX or Windows with Bootcamp. Now, since dual booting into BT is not an option, I would like Backtrack to run in VM inside my MacOSX Lion - and this it does. It works like a charm inside VirtualBox. But since there are no 64bit drivers for the wifi adapter, Lion doesn't recognize it and cannot install it. This, in turn, means that Backtrack cannot see it even though AWUS036H usually works flawlessly with BT. How can I make my VM-based BT see the wifi adapter even if the parent OS doesn't see it, if at all? Is there a way, or am I better off buying a new WiFi adapter that supports OSX 10.7 such as the AWUS036NHR?

  Read the article

• "Access Denied" error when starting Windows Security Center service

  - by Isxek

  I am working on a laptop with Windows 7 Ultimate (32-bit) which had previous issues with Microsoft Security Essentials. I've removed the previous installation of Security Essentials and reinstalled it. There's no problem with the said antivirus now, but after a couple of days it was brought back to me because of the error about Windows Security Center service not being started. I've tried setting it to start Automatically instead of "Delayed Start", but I still keep getting "Error 5: Access is Denied." I've searched other possible solutions but it's mostly been either what I did already or "Don't worry about it." Any ideas? Thanks in advance! EDIT: I've scanned the system with both Malwarebytes AM and SUPERAntiSpyware and have found no traces of anything. EDIT2: I have also tried running sfc /scannow to see if the files might be damaged. Got the message no integrity violations were found, however.

  Read the article

• Offloading Cable Modem operations to Router

  - by Matt

  I may be crazy here, but I seem to recall a conversation in the past stating that it was possible to offload some of the operations taken by one's cable modem to one's router. The logic was that since the cable modem is often equipped with a cheaper processor as it is supplied by your provider, that it often chokes even crashes when you start a torrent or something else with a lot of connections. I seem to recall that some routers offered the ability to take some of the modem's operations. Is this possible or have I imagined the whole thing? I ask because my modem seems to have many issues when I start torrents.

  Read the article

• Postfix / Dovecot email setup not storing email

  - by Nick Duffell

  I'm trying to setup postfix / dovecot on my debian server to use it for a mail server. I set everything up according to a tutorial on the net, and it all seemed OK. I can send emails from it, so SMTP is not a problem, however I cannot receive emails. Looking into the files in /home/nick/mail/ I can see that if I send an email to myself (from the server, to itself) the emails are there, but are put straight into the Deleted Messages folder. I don't know why this is. When I send an email from another mail account (not on this server), the emails are nowhere to be found. Also, looking at the log file /var/log/mail.log all seems to be OK, I get the following when I receive an email, which looks OK to me: Nov 7 22:47:22 nickduffell postfix/local[17825]: 05B1173581A6: to=, relay=local, delay=0.37, delays=0.31/0.02/0/0.03, dsn=2.0.0, status=sent (delivered to mailbox) Any ideas? Thanks EDIT: I should also add that although the emails I send myself are in the Deleted Messages folder, and in my mail client I can see that "Trash" has 3 items, I cannot download them in my mail client...

  Read the article

• Virtualbox and Serial Port permissions

  - by Pandincus

  I have a Windows XP Pro SP3 host machine running a Windows XP Pro SP3 guest machine. The host machine has one serial port, COM1, that I need to use in the guest machine. When I add the serial port to the guest machine and try to start it, I get the following error: Failed to start the virtual machine xxx Cannot open host device 'COM1' for read/write access. Check the permissions of that device (VERR_ACCESS_DENIED). Unknown error creating VM (VERR_ACCESS_DENIED). What are some of the things that might be causing this problem? How can I check "permissions" on a serial port?

  Read the article

• Useless Plesk Error?

  - by Josh Pennington

  I am trying to determine why Plesk on my server won't start and I have no idea where to even start (since my hosting company appears to not want to help me out). Anyways, the error in my Plesk error_log is as follows: 2010-12-25 21:30:28: (log.c.75) server started 2010-12-25 21:30:28: (network.c.336) SSL: error:00000000:lib(0):func(0):reason(0) 2010-12-25 21:30:28: (log.c.75) server started 2010-12-25 21:30:28: (network.c.336) SSL: error:00000000:lib(0):func(0):reason(0) It leads me to believe its a problem with the SSL on the server but I am not sure what to make of the error. Can someone lead me in the right direction? Thanks Josh Pennington

  Read the article

• Need Routing help (tagged/untagged)

  - by TheCleaner

  I really need some help trying to figure some "basic" routing. My brain is fried from being sick for a week and I'm not thinking clearly. Picture below describes my "setup". I'm trying to accomplish routing a user from their workstation to the Juniper SSG520 and then "OUT" through the internet connection. I can't move the connection as it is physically located where the user's switch is. Here's what I CAN do at this point: I can ping from the Juniper SSG520 eth3/3 to 6x.xxx.253.116 from 6x.xxx.253.114 I can ping from the x450 in the top right to 6x.xxx.253.112 from 6x.xxx.253.116 What I CANNOT DO: I cannot ping from the SSG520 eth3/3 to 6x.xxx.253.112 from 6x.xxx.253.114 (basically from the Juniper box to the gateway. I've tried changing port 1 in the x450 VLAN 666 as tagged but when I do that then I can't even ping from the Juniper SSG520 eth3/3 to the VLAN on the x450 (6x.xxx.253.116). I need to route traffic out the eth3/3 interface on the SSG520 THROUGH the 2 x450 Switches and out the internet connection. The caveat is that the 2 x450 switches are connected via fiber over distance and have tagged VLANs in them for the routing. Thoughts? http://img251.imageshack.us/img251/7752/drawing1.jpg

  Read the article

• How to setup an IPSec / GRE tunnel on Windows Server 2008

  - by qbeuek

  I have a Windows Server 2008 that has a single network interface configured with a public IP address. My business partner has a private network. From my server, I need to access all the devices on his private network, and those devices must be able to access my server. My business partner has a standard solution for these requirements. They will setup an IPSec + GRE tunnel to my server. They told me, that I will need an additional public IP address for this to work. If it really is necessary, there is no problem, I can get an additional public IP address, although it will be assigned to the same physical network interface. I assume that on my server I will have both public IP addresses and also the private IP address from the tunnel (the same that is visible for the devices inside the private network). What alternatives do I have? Is it possible to configure this tunnel on my Windows Server 2008? Can it be done using only Windows tools, or do I need an additional free / commercial VPN software? If it cannot be done directly on Windows, can I setup an additional virtual machine running Linux, that will handle the IPSec + GRE tasks? How to do it? If it cannot be done on a virtual linux box, will I have to buy and setup a Cisco router to handle the IPSec + GRE tasks? Thanks for your opinions. I'm watching this question to clarify any issues or questions.

  Read the article

• .bat file overriding answer

  - by John Peters

  When I made this batch file, when typing y and n for the first time it works fine, but as soon as I choose n, every single time I try inputting something, it opens up the 7000 songs wpl list then closes it and replaces it with Rick Astley... HELP! @echo off :Ask echo Would you like to listen to the best songs out of the 7000 I have?(Y/N) set INPUT= set /P INPUT=Type input: %=% If /I "%INPUT%"=="y" goto yes If /I "%INPUT%"=="n" goto lolno echo Incorrect input & goto Ask :yes start c:/Users/MyName/Music/Playlists/"The Best of the 7000 songs that I have.wpl" :lolno start c:/Users/MyName/Music/Downloads/Music/"Various Artists"/"The Number One 80's Album Disc 2"/"06 Never Gonna Give You Up.mp3"

  Read the article

• Degraded RAID5 and no md superblock on one of remaining drive

  - by ark1214

  This is actually on a QNAP TS-509 NAS. The RAID is basically a Linux RAID. The NAS was configured with RAID 5 with 5 drives (/md0 with /dev/sd[abcde]3). At some point, /dev/sde failed and drive was replaced. While rebuilding (and not completed), the NAS rebooted itself and /dev/sdc dropped out of the array. Now the array can't start because essentially 2 drives have dropped out. I disconnected /dev/sde and hoped that /md0 can resume in degraded mode, but no luck.. Further investigation shows that /dev/sdc3 has no md superblock. The data should be good since the array was unable to assemble after /dev/sdc dropped off. All the searches I done showed how to reassemble the array assuming 1 bad drive. But I think I just need to restore the superblock on /dev/sdc3 and that should bring the array up to a degraded mode which will allow me to backup data and then proceed with rebuilding with adding /dev/sde. Any help would be greatly appreciated. mdstat does not show /dev/md0 # cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] md5 : active raid1 sdd2[2](S) sdc2[3](S) sdb2[1] sda2[0] 530048 blocks [2/2] [UU] md13 : active raid1 sdd4[3] sdc4[2] sdb4[1] sda4[0] 458880 blocks [5/4] [UUUU_] bitmap: 40/57 pages [160KB], 4KB chunk md9 : active raid1 sdd1[3] sdc1[2] sdb1[1] sda1[0] 530048 blocks [5/4] [UUUU_] bitmap: 33/65 pages [132KB], 4KB chunk mdadm show /dev/md0 is still there # mdadm --examine --scan ARRAY /dev/md9 level=raid1 num-devices=5 UUID=271bf0f7:faf1f2c2:967631a4:3c0fa888 ARRAY /dev/md5 level=raid1 num-devices=2 UUID=0d75de26:0759d153:5524b8ea:86a3ee0d spares=2 ARRAY /dev/md0 level=raid5 num-devices=5 UUID=ce3e369b:4ff9ddd2:3639798a:e3889841 ARRAY /dev/md13 level=raid1 num-devices=5 UUID=7384c159:ea48a152:a1cdc8f2:c8d79a9c With /dev/sde removed, here is the mdadm examine output showing sdc3 has no md superblock # mdadm --examine /dev/sda3 /dev/sda3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff0e - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 0 8 3 0 active sync /dev/sda3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed [~] # mdadm --examine /dev/sdb3 /dev/sdb3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff20 - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 1 8 19 1 active sync /dev/sdb3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed [~] # mdadm --examine /dev/sdc3 mdadm: No md superblock detected on /dev/sdc3. [~] # mdadm --examine /dev/sdd3 /dev/sdd3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff44 - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 3 8 51 3 active sync /dev/sdd3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed fdisk output shows /dev/sdc3 partition is still there. [~] # fdisk -l Disk /dev/sdx: 128 MB, 128057344 bytes 8 heads, 32 sectors/track, 977 cylinders Units = cylinders of 256 * 512 = 131072 bytes Device Boot Start End Blocks Id System /dev/sdx1 1 8 1008 83 Linux /dev/sdx2 9 440 55296 83 Linux /dev/sdx3 441 872 55296 83 Linux /dev/sdx4 873 977 13440 5 Extended /dev/sdx5 873 913 5232 83 Linux /dev/sdx6 914 977 8176 83 Linux Disk /dev/sda: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 66 530113+ 83 Linux /dev/sda2 67 132 530145 82 Linux swap / Solaris /dev/sda3 133 182338 1463569695 83 Linux /dev/sda4 182339 182400 498015 83 Linux Disk /dev/sda4: 469 MB, 469893120 bytes 2 heads, 4 sectors/track, 114720 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/sda4 doesn't contain a valid partition table Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdb1 * 1 66 530113+ 83 Linux /dev/sdb2 67 132 530145 82 Linux swap / Solaris /dev/sdb3 133 182338 1463569695 83 Linux /dev/sdb4 182339 182400 498015 83 Linux Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdc1 1 66 530125 83 Linux /dev/sdc2 67 132 530142 83 Linux /dev/sdc3 133 182338 1463569693 83 Linux /dev/sdc4 182339 182400 498012 83 Linux Disk /dev/sdd: 2000.3 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdd1 1 66 530125 83 Linux /dev/sdd2 67 132 530142 83 Linux /dev/sdd3 133 243138 1951945693 83 Linux /dev/sdd4 243139 243200 498012 83 Linux Disk /dev/md9: 542 MB, 542769152 bytes 2 heads, 4 sectors/track, 132512 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md9 doesn't contain a valid partition table Disk /dev/md5: 542 MB, 542769152 bytes 2 heads, 4 sectors/track, 132512 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md5 doesn't contain a valid partition table

  Read the article

• Snow Leopard and NAS share

  - by Andreas

  Hi, I bought a BlackArmor 220 from Seagate. When I start Snow Leopard the NAS shows up with its full name under shares. The problem is that when I click the NAS only a folder BA_Backup shows up, all the other folders, I created, don't. When I click the NAS, it says I'm connected as "guest". I mean I can connect by "Go to server" and additionally add the folders to the user startup objects, so they show up when I start my Mac, but when the NAS already shows up, why can't I configure it? Where can I change this? Thanks! Cheers, Andi

  Read the article

• Windows will not go into standby

  - by Robert

  When I select Start-Turn off computer-Standby the 'turn off computer' option window closes, and then nothing else happens. I can start new applications, and Windows acts like I never selected standby. If I have a TV program scheduled to record I get a window asking if I'm sure, there are programs scheduled to record - and the computer just keeps running after I select yes. (If a program is not scheduled then that task in not running/in memory - this problem happens even if I'm not watching TV and no TV scheduling task is running.) This problem happens regardless of whether Media Center is running. Windows XP SP3 Media Center Edition, all current updates installed.

  Read the article

• Windows server 2008R2 routing with single NIC

  - by Fabian

  I'm trying to duplicate a Linux server configuration to a windows server 2008R2 box. Basicaly this linux server acts as a router, but it is doing its job with only 1 interface (1 NIC). Here is the network configuration in place (I cannot change it) : INTERNET <== Router (local ip = 194.168.0.3) <== linux Server (ip : 194.168.0.2). The router is configured with a DMZ to 194.168.0.2, and only allow this IP to connect to internet (Cannot change this router configuration). The linux server is configured with a default gateway to 194.168.0.3, with the option : "Act as router". All other computer on the lan have this configuration (given by DHCP) : IP range : 194.168.0.X MASK : 255.255.255.0 Default gateway : 194.168.0.2 And everything is working perfectly. I'm trying to reproduce this way of routing with only one NIC from a windows server 2008R2, but it seems that you cannnot do it with only one NIC (all exemples I see are refering to 2 NIC with 2 different network). Does someone have an idea how to achieved this in Windows server 2008R2 ? Tx you for your help ! Fabian.

  Read the article

• AD User Passwords expiring without any notifications?

  - by scooter133

  We setup password Policies in Active Directory to Expire peoples passwords after so many days. Well it looks like the time has come for the Expiration of the Passwords and people are getting locked out... There has been no warning of user passwords about to expire. They just come in to work and they cannot log in, the phones no longer connect, nothing. Reset the password and all is good. Some of the users are locked out, though most are not, they just cannot log in. On setting the password Expiration, I didn't see anything about nor warning the users of the impending expiration. Seems like it used to warn you 15 days or so before it would expire. Clients range from: WinXP, WinVista, Win7 and Server 2008R2 Remote Desktop Services. How can I make sure my users are warned of the Expiration? Resultant Set of Policy for User that was not prompted: Account Policies/Password Policy Policy Setting Winning GPO Enforce password history 10 passwords remembered Default Domain Policy Maximum password age 270 days Default Domain Policy Minimum password age 0 days Default Domain Policy Minimum password length 4 characters Default Domain Policy Password must meet complexity requirements Disabled Default Domain Policy Store passwords using reversible encryption Disabled Default Domain Policy Account Policies/Account Lockout Policy Policy Setting Winning GPO Account lockout duration 20 minutes Default Domain Policy Account lockout threshold 5 invalid logon attempts Default Domain Policy Reset account lockout counter after 15 minutes Default Domain Policy Local Policies/Audit Policy Policy Setting Winning GPO Audit account logon events Failure Default Domain Policy Audit account management Success, Failure Default Domain Policy Audit directory service access Success, Failure Default Domain Policy Audit logon events Failure Default Domain Policy Audit policy change Success, Failure Default Domain Policy Audit privilege use Failure Default Domain Policy Local Policies/Security Options Interactive Logon Policy Setting Winning GPO Interactive logon: Prompt user to change password before expiration 7 days Default Domain Policy

  Read the article

• CentOS 7: PHP high CPU usage

  - by HTF

  I've migrated Observium monitoring platform from CentOS 6.5 to CentOS 7 and I've noticed high CPU usage mostly caused by PHP, the CPU load increase when pooling script is running (poller-wrapper.py). Both VMs are running on the same physical host (KVM hypervisor) with exactly the same spec. I also tested this with a simple PHP benchmark script and CentOS 7 is slower - is it strictly related to PHP version (5.4.30 vs 5.4.16)? CentOS 6.5 [root@centos6:~]# php -f bench.php -------------------------------------- | PHP BENCHMARK SCRIPT | -------------------------------------- Start : 2014-08-19 22:26:34 PHP version : 5.4.30 Platform : Linux -------------------------------------- test_math : 1.610 sec. test_stringmanipulation : 1.416 sec. test_loops : 0.822 sec. test_ifelse : 0.729 sec. -------------------------------------- Total time: : 4.577 sec. CentOS 7 [root@centos7:~]# php -f bench.php -------------------------------------- | PHP BENCHMARK SCRIPT | -------------------------------------- Start : 2014-08-19 22:27:58 PHP version : 5.4.16 Platform : Linux -------------------------------------- test_math : 2.117 sec. test_stringmanipulation : 1.246 sec. test_loops : 1.174 sec. test_ifelse : 0.752 sec. -------------------------------------- Total time: : 5.289 sec. CPU usage increased right after migration:

  Read the article

• Starting SQLPlus in linux

  - by sandos

  How do you start sqlplus in linux? I know this is a service in windows.

  Read the article

< Previous Page | 395 396 397 398 399 400 401 402 403 404 405 406  | Next Page >