Search Results

Search found 1267 results on 51 pages for 'ati catalyst'.

Page 4/51 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Which driver for "ATI Mobility Radeon HD 3650" in a laptop?

  - by Lasse V. Karlsen

  We have some HP laptops here that comes equipped with a video card that identifies itself as "ATI Mobility Radeon HD 3650", like this one. However, which drivers do we choose? As far as we can tell, HD 3650 is desktop cards, or at least there are no drivers listed for that series with "Mobility" in their name. If I pick the following on the ATI Driver Download page: Graphics Windows Vista 32-bit Edition Mobility Radeon Then the dropdown for the card model contains X300, X600, X700, X800, X1300, X1400, X1600, X1800, 9600, 9700 and 9800 models, but no "HD" nor "36xx series". However, if I change to just "Radeon" for the last selection there, I can find a "Radeon HD 3600 Series" model in the list. Also, if I pick "Windows 7" as the operating system, I can find a "Mobility Radeon HD 3000 series" card, but no 3600. So, which one to pick? The main reason I ask is that they all seem to have some kind of problem installing, so neither seems to be the right one (they all crash with "Catalyst Install Manager has stopped working".)

  Read the article

• Best Ati Radeon x1200 drivers for 12.10

  - by Jaclyn

  [Long story short is at the bottom if you don't care about my ranting] Ok, well, I have the unfortunate distinction of having an Acer Extensa 4420 (Yes, the model with the faulty motherboard, and no, I do not know how it is still working either). Long story short I need the best drivers for my Ati Radeon x1200 integrated graphics card. The Ati Propriatary drivers for 12.10 no longer supports my video card. Currently when I try to play Minecraft, or any game really, the framerate is quite terrible despite the fact that my handy dandy system load monitor says that I have plenty of memory and CPU power (Mind you, this is when I'm not playing minecraft; that kind of uses up all of my resources unless it's on the worst graphical settings, and even then I have terrible framerate, but plenty of resources left over). I tried the fglrx through a workaround guide, and it completely killed my display and I had to uninstall it. I'm considering just trying to install fglrx through synaptic, but I am hesitant to do so since I don't want a repeat of the BSBDD!!! (Black Screen of Bad Drivers 'o DOOOM!!!), so I will wait until after I get some input from you fine ladies and gentlemen on to what your advice it. ok, so I'm running xubuntu 12.10 64 bit. I upgraded from 10.10 to 11.04. Then about a month ago I went from natty to quantal via the update option in the package updater, and then I decided that I was sick of gnome so I installed xfce. I did not install new drivers from natty to when I wound up at 12.10, so that shouldn't have changed, and they were indeed quite terrible back then, but now I'm using xubuntu as my main os, so I actually need good drivers. uuuugh. Anyway, long story short: I need to know what are the best drivers available for my card, and how to install them, because I am a linux novice, and I have tried everything that I can think of, including search google. Small edit: I forgot to note that since I upgraded to 12.10, my VGA out does not work (I haven't had a chance to try the s-video yet), and possibly related, the USB port on that side of my laptop does not work anymore either.

  Read the article

• Which driver for ATI Radeon 9600 All-In-Wonder

  - by vanja

  I'm very new to Ubuntu and Linux for that matter, and wondering if anyone there found proper drivers for ATI Radeon 9600 All-In-Wonder. The system (Ubuntu 12.04) doesn't let me change screes resolution and it's not recognizing the card.. I found this page http://wiki.cchtml.com/index.php/Hardware that shows some info but i'm really confused where to start and if it's possible at all to make everything work. Any help would be really appreciated. Thanks in advance!! -vanja

  Read the article

• Doesn't boot after installing fglrx for ati 5650

  - by elivanja

  Hi, I'm a complete noob here, I recently bought an HP 3161 with an ATI 5650 hd card, when I installed 10.04 LTS everything was working fine until I was prompted to activate proprietary driver fglrx, after I did this I couldn't reboot (not even in recovery mode) until I reinstalled 10.04, what can I do? I would appreciate any help since I haven't been able to find anyone with the same problem, thanks.

  Read the article

• Dual monitor ATI hd 4350 (1GB PCI-e), ubuntu 12.04 (pear Linux) Do I need the ATI driver or open source?

  - by Geeve

  I think I covered it in the title, Right now both monitors are mirrored (both 19" at 1440x900). I guess what I need to know is do I need the ATI proprietary driver or will the open source driver from Ubuntu (additional drivers) work? I want to expand the desktop between the two monitors. Still finishing install and running updates now, I just wanted to gather all documentation and downloads prior to doing what is necessary. Thanks Geeve

  Read the article

• Problem with ATI Radeon HD 7670M on Ubuntu 12.10

  - by Aniket

  I updated from Ubuntu 12.04 to 12.10 a couple of days back. My machine is a Dell Inspiron 15R with a Radeon HD 7670M Graphic Driver. When I was using 12.04, I was able to install the propriety driver using the notification you usually get. But after the upgrade, the graphic driver is not getting installed. I am not getting the notification to install the driver And I also tried to follow the steps given - What is the correct way to install ATI Catalyst Video Drivers (fglrx)? I tried the legacy as well as the usual installation procedure Both ways I failed and my graphics went to the fallback, disabling Unity Note: My laptop is getting heated to 80 degrees and can shut down at any point. Please help.

  Read the article

• Monitor flickering ATI

  - by Atzu

  I'm using ubuntu 12.10 on laptop samsung with randeon hd 6620g (APU A8), when I run amdcccle -version it says 2.18, not sure if that's the correct version. My problem is that I have and external monitor, AOC e2343Fsk and when I finally got it working at the resolution I want 1920x1080 it works fine for like 5minutes and then it starts flickering... I solved this on Windows (the exact same problem) with some options (I don't remember very well) I believe there were some buttons '+' and '-' on some vsync option I played with them on windows and Yay! got it working, but I don't see anything similar on this catalyst version (I used xorg-edgers ppa for installing fglrx). Thanks.

  Read the article

• Graphical driver 13.10 ATI RV630

  - by Michael Cephalus

  I started updating the distro from 13.04 to 13.10. Then I got my hands on a Radeon HD 2600. I installed the RV630 compatible Catalystdriver from the official webpage. Then xserver crashed everytime I opened a browser or vlc fx. I took notice that there was no driver listed in configuration underneath. michael@statubtunu:~$ lshw -c video WARNING: you should run this program as super-user. *-display UNCLAIMED description: VGA compatible controller product: RV630 PRO [Radeon HD 2600 PRO] vendor: Advanced Micro Devices, Inc. [AMD/ATI] physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list configuration: latency=0 resources: memory:d0000000-dfffffff memory:e0500000-e050ffff ioport:1000(size=256) memory:e0000000-e001ffff i installed additional drivers from jockey and the ubuntu softwarecenter ati-driver. though that only made it to crash xserver completely and when i type: michael@statubtunu:~$ sudo startx X.Org X Server 1.14.3 Release Date: 2013-09-12 X Protocol Version 11, Revision 0 Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu Current Operating System: Linux statubtunu 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 17:26:33 UTC 2013 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-13-generic root=UUID=8fb2e395-0ea2-4f45-ac66-225696b7ce2c ro quiet splash vt.handoff=7 Build Date: 15 October 2013 09:23:29AM xorg-server 2:1.14.3-3ubuntu2 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.30.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 12 18:50:02 2013 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Initializing built-in extension Generic Event Extension Initializing built-in extension SHAPE Initializing built-in extension MIT-SHM Initializing built-in extension XInputExtension Initializing built-in extension XTEST Initializing built-in extension BIG-REQUESTS Initializing built-in extension SYNC Initializing built-in extension XKEYBOARD Initializing built-in extension XC-MISC Initializing built-in extension SECURITY Initializing built-in extension XINERAMA Initializing built-in extension XFIXES Initializing built-in extension RENDER Initializing built-in extension RANDR Initializing built-in extension COMPOSITE Initializing built-in extension DAMAGE Initializing built-in extension MIT-SCREEN-SAVER Initializing built-in extension DOUBLE-BUFFER Initializing built-in extension RECORD Initializing built-in extension DPMS Initializing built-in extension X-Resource Initializing built-in extension XVideo Initializing built-in extension XVideo-MotionCompensation Initializing built-in extension SELinux Initializing built-in extension XFree86-VidModeExtension Initializing built-in extension XFree86-DGA Initializing built-in extension XFree86-DRI Initializing built-in extension DRI2 Loading extension GLX ERROR: could not insert 'fglrx': No such device (II) [KMS] drm report modesetting isn't supported. (EE) (EE) Backtrace: (EE) 0: /usr/bin/X (xorg_backtrace+0x49) [0xb77780b9] (EE) 1: /usr/bin/X (0xb75d8000+0x1a3e24) [0xb777be24] (EE) 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb75b540c] (EE) 3: /usr/bin/X (xf86findOption+0x2a) [0xb7681daa] (EE) 4: /usr/bin/X (xf86findOptionValue+0x23) [0xb7681f43] (EE) 5: /usr/bin/X (0xb75d8000+0x7ebfd) [0xb7656bfd] (EE) 6: /usr/bin/X (xf86ProcessOptions+0x37) [0xb7657507] (EE) 7: /usr/lib/xorg/modules/libvbe.so (vbeDoEDID+0xe7) [0xb5eb8647] (EE) 8: /usr/lib/xorg/modules/drivers/vesa_drv.so (0xb5ee7000+0x287c) [0xb5ee987c] (EE) 9: /usr/bin/X (InitOutput+0xb23) [0xb7659c33] (EE) 10: /usr/bin/X (0xb75d8000+0x2a30b) [0xb760230b] (EE) 11: /lib/i386-linux-gnu/libc.so.6 (__libc_start_main+0xf5) [0xb71ba905] (EE) 12: /usr/bin/X (0xb75d8000+0x2a908) [0xb7602908] (EE) (EE) Segmentation fault at address 0x5 (EE) Fatal server error: (EE) Caught signal 11 (Segmentation fault). Server aborting (EE) (EE) Please consult the The X.Org Foundation support at for help. (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. (EE) (EE) Server terminated with error (1). Closing log file. This is what comes, but no GUI. Is there any way to deal with this?

  Read the article

• Cant get lm-sensors to load ATI Radeon temp and fan or output all settings

  - by woody

  New to Linux and having minor issues :/ . I followed this guide initially but did not recieve the proper output and did not show my ATI Radeon HD 5000 temp or fan speed. Then used this guide, same problems exhibited. No issues installing and no errors. I think its not reading i2c for some reason. The proprietary driver is installed and functioning correctly according fglrxinfo. I can use aticonfig commands and view both temp and fan. Any ideas on how to get the ATI Radeon sensors working under 'sensors'? When i run 'sudo sensors-detect' this is my ouput # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: LENOVO IdeaPad Y560 (laptop) # Board: Lenovo KL3 This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... Yes Found unknown chip with ID 0x8502 Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel 3400/5 Series (PCH) Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO) My output for 'sensors' is: acpitz-virtual-0 Adapter: Virtual device temp1: +58.0°C (crit = +100.0°C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +56.0°C (high = +84.0°C, crit = +100.0°C) Core 1: +57.0°C (high = +84.0°C, crit = +100.0°C) Core 2: +58.0°C (high = +84.0°C, crit = +100.0°C) Core 3: +57.0°C (high = +84.0°C, crit = +100.0°C) and my '/etc/modules' is: # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. lp rtc # Generated by sensors-detect on Fri Nov 30 23:24:31 2012 # Chip drivers coretemp

  Read the article

• ATI graphics card, with gnome shell on Ubuntu 11.10, screen flickers

  - by bioShark

  After installing gnome shell, without any problem, after log in the fonts are missing and it looks like crap...nothing is readable. Don't want to make it a double post, because my issue is similar to the one from this question but for me the problems have not been solved properly. After running the commands from that post, and installing the latest AMD 11.10 driver, the Gnome shell display issues have been solved. But each time I move the mouse in the upper left corner, to bring up the applications...my entire screen flickers. Without the applications been displayed, everything looks fine. Hardware: ATI HD4870, Intel Q6600.

  Read the article

• ATI graphics card, with gnome shell, screen flickers

  - by bioShark

  After installing gnome shell, without any problem, after log in the fonts are missing and it looks like crap...nothing is readable. Don't want to make it a double post, because my issue is similar to the one from this question but for me the problems have not been solved properly. After running the commands from that post, and installing the latest AMD 11.10 driver, the Gnome shell display issues have been solved. But each time I move the mouse in the upper left corner, to bring up the applications...my entire screen flickers. Without the applications been displayed, everything looks fine. Hardware: ATI HD4870, Intel Q6600.

  Read the article

• Boots to a totally blank screen after I installed some ATI Radeon card updates

  - by baboonWorksFine

  I am using Ubuntu 10.04 LTS, dual boot with win7 on ThinkPad T400, I followed Ubuntu update hints and installed some update for my ATI Radeon graphic card, but when I boot to Ubuntu(means I can still load GRUB), the tragedy happened, the screen goes to blank and no matter what key stroke, I can not get any responds, I try to go to text terminal, but impossible! However when I hit the power button, the computer would pop out the Ubuntu shutdown screen briefly and shut down. I figure out I should delete the updates package of my graphic card, but I don't even get a chance to go to text terminal, please help me!

  Read the article

• For some reason I can't get ATI FGLRX Drivers to support 3D acceleration on Ubuntu 12.04

  - by HungryMan

  I have an ATI 5650m and I've had 0 issues with 3D Acceleration in the past. I had to reinstall Ubuntu entirely, and now with the 12.6 drivers I get - One or more tools required for installation cannot be found on the system I can't seem to solve this issue. I installed the FGLRX drivers through the "alternate command line" guide on the Ubuntu Wiki including the instructions for getting 3D support. They seem to install but I get an error with vainfo libva: VA-API version 0.32.0 Xlib: extension "XFree86-DRI" missing on display ":0.0". libva: va_getDriverName() returns 0 libva: Trying to open /usr/lib/x86_64-linux-gnu/dri/fglrx_drv_video.so libva error: /usr/lib/x86_64-linux-gnu/dri/fglrx_drv_video.so init failed libva: va_openDriver() returns -1 vaInitialize failed with error code -1 (unknown libva error),exit I have tried help here: http://ubuntuforums.org/showthread.php?t=2014440 It's a bit frustrating as I can do basically nothing without 3D support. I can't use super + direction or super + w or even configure the Unity bar to be 32px. If anyone could help I'd appreciate that.

  Read the article

• Can't install ATI proprietary drivers in 12.10

  - by EApubs

  I have a laptop with ATI Radeon 6770M HD Hybrid graphics card. In Ubuntu 12.04, I installed the fglrx driver through "additional drivers" and it worked. (I can even switch GPUs). But in the new Ubuntu 12.10, after installing, Unity won't load. Only the mouse and the wallpaper. If I initialize the settings sudo aticonfig --initial then after rebooting it gives a warning saying I'm in low graphics mode! How to fix this? PS : Earlier i used software source to install the drivers. But when using the terminal, I got this warning : update-alternatives: warning: forcing reinstallation of alternative /usr/lib/fglrx/ld.so.conf because link group x86_64-linux-gnu_gl_conf is broken Update : Filed a bug report in launchpad : https://bugs.launchpad.net/fglrx/+bug/1068661

  Read the article

• Do I need the ATI driver or open source for dual monitor setup (ATI HD 4350 - 1GB PCI-e) in Pear Linux 12.04?

  - by Geeve

  I think I covered my question in the title. Right now both monitors are mirrored (both 19" at 1440x900). I guess what I need to know is do I need the ATI proprietary driver or will the open source driver from Ubuntu (additional drivers) work? I want to expand the desktop between the two monitors. Still finishing install and running updates now, I just wanted to gather all documentation and downloads prior to doing what is necessary. Any help will be greatly appreciated.

  Read the article

• Problem graphics with ATI Radeon x1270 (RS690M) on Ubuntu 12.04

  - by Giuseppe Della Corte

  I'm Italian and so I apologize for my English! I'm a beginner to Ubuntu and I tried it on my desktop PC and it's fantastic, fast and fun! I decided to try it on my netbook Packard Bell DOT M/A and this is the configuration: AMD Athlon L110 1.2GHz 2GB of RAM ATI Radeon x1270 (RS690M) 150GB Hard Disk I installed Ubuntu 12.04 with Wubi (dualboot Windows 7 + Ubuntu 12.04), because the netbook does not have a DVD player! During the installation everything is OK, after it was installed I see mistakes in the graphical display! I see objects that are seen in different colors and moving (buttons, mouse pointer, text bar ... etc ...) At one point came not to see anything, such as this screenshot: The drivers are open, that is already installed in Ubuntu. Windows 7 video card runs fine, can run well Aero (transparent window effects), I can watch movies in HD and play some games with the Catalyst drivers from AMD. Now I ask a favor, you can help me solve this problem? Is there a fix for this driver or drivers different on the Internet? Thanks for your attention, good bye!

  Read the article

• ATI HD5450 w/ Ubuntu 14?

  - by Oliwb

  So, I'm running Ubuntu 12.04 right now. Last night I realised that I'm way behind as we're up to 14! Decided to run the updater and figured I'd take the path of least resistance (but lengthy choice) of going 12.04 - 12.10 - 13.xx - 14.xx. So I download the first packet and then get an error message about my graphics card perhaps not working in 12.10. Now part of the reason I was looking to upgrade is because I get (and have always had) this strange occasional flickering - now that I have two screens it's just on the second monitor.....oddly this is not the same port that was giving issues before). The graphics card is an ATI Radeon HD5450 and I have the Catalyst (I think it's 13 or 14) driver installed - last night. It could be that the graphics card has never worked properly...I bought the PC new and with an "upgraded" video card and it's always suffered with this flicker. I just figured that the drivers weren't right or something. So I have 3 questions: 1) is my video card broken or is the driver letting it down and causing the flicker? 2) will it be able to handle the upgrade to 14 via 13? Or should I cut my losses and get something newer? 3) if I should get something newer....what should I get ( Thanks in advance....

  Read the article

• Cannot install "ATI/AMD proprietary FGLRX graphics driver" (SystemError)

  - by Fisherman John

  I have just installed a fresh copy of 12.04.1 64bit. I formatted my PC completely and enabled updates during the installation. After the installation was complete, I went on updating my software. However, when I wanted to install the additional drivers using the Additional Drivers tool (namely "ATI/AMD proprietary FGLRX graphics driver"), it gave me this error: SystemError: E:Unable to correct problems, you have held broken packages. The same error shows up if I try installing the post-release updates driver. Installing the drivers from the terminal results in this output: XXXXXX:~$ sudo apt-get install fglrx [sudo] password for XXXXX: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: fglrx : Depends: lib32gcc1 but it is not going to be installed Depends: libc6-i386 but it is not going to be installed E: Unable to correct problems, you have held broken packages." I get this using "sudo apt-get update": http://pastebin.com/AWAtDXjY But "sudo apt-get install fglrx" still get me this error: http://pastebin.com/RYM55bVN & "sudo apt-get -f install fglrx" gives me this error: http://pastebin.com/xxekajvP Any help would be greatly appreciated. (Please note that I'm new to Linux, coming directly from Windows. I have tried Ubuntu twice or so before, but it was not for a long period of time. The drivers got installed smoothly the few times I've tried Ubuntu, but post-release updates never worked for me.) [I am going to work now, so I can only answer from my phone. Can't really test any new solutions you may give me until ~10 hours from now on. Maybe more.] @stonedsquirrel When I try to run that command, I get this error: "XXXXXX:~$ sudo apt-get install fglrx [sudo] password for XXXXX: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: fglrx : Depends: lib32gcc1 but it is not going to be installed Depends: libc6-i386 but it is not going to be installed E: Unable to correct problems, you have held broken packages." ie. I get the same error. ( I am Fisherman John, dunno how to login & thereby respond to your comment again _ )

  Read the article

• Catalyst Control Center removal

  - by Allan

  I've recently tested a graphics card on a machine that required different drivers than my onboard integrated graphics, so I had catalyst control center installed. After I pulled out the graphics card and went back to using the onboard graphics, I deleted the catalyst center through control panel - programs.. which was fine. But apparently it didn't really remove it. it doesn't show up under programs anymore but when I reboot windows I get an error saying "The catalyst Control Center is not supported by the driver version of your enabled graphics adapter" and its still in the process bar... how do I permanently remove it?

  Read the article

• Cant get lm-sensors to load ATI Radeon temp or fan

  - by woody

  New to Linux and having minor issues :/ . I followed this guide initially but did not recieve the proper output and did not show my ATI Radeon HD 5000 temp or fan speed. Then used this guide, same problems exhibited. No issues installing and no errors. I think its not reading i2c for some reason. The proprietary driver is installed and functioning correctly according fglrxinfo. I can use aticonfig commands and view both temp and fan. Any ideas on how to get it working under 'sensors'? When i run 'sudo sensors-detect' this is my ouput # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: LENOVO IdeaPad Y560 (laptop) # Board: Lenovo KL3 This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... Yes Found unknown chip with ID 0x8502 Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel 3400/5 Series (PCH) Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO) My output for 'sensors' is: acpitz-virtual-0 Adapter: Virtual device temp1: +58.0°C (crit = +100.0°C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +56.0°C (high = +84.0°C, crit = +100.0°C) Core 1: +57.0°C (high = +84.0°C, crit = +100.0°C) Core 2: +58.0°C (high = +84.0°C, crit = +100.0°C) Core 3: +57.0°C (high = +84.0°C, crit = +100.0°C) and my '/etc/modules' is: # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. lp rtc # Generated by sensors-detect on Fri Nov 30 23:24:31 2012 # Chip drivers coretemp

  Read the article

• ATI Radeon Graphics Processing Units And ATI Radeon Drivers

  Do you like video games? Most people who are into computers do. Whether it';s a role playing game infested with monsters and treasure, or a simulator that allows you to know what flying a real airplan... [Author: Sunny Makkar - Computers and Internet - March 20, 2010]

  Read the article

• How can I solve display glitches and poor performance with ATI fglrx driver on my ThinkPad X100e?

  - by rewbs

  I noticed that video performance on my Thinkpad X100e was very poor compared to Windows 7, so I installed the ATI fglrx proprietary drivers by using the "Additional Drivers" dialogue box. The system has an ATI Radeon Mobility HD 3200 chip. The result of installing the drivers is pretty devastatingly negative, with symptoms such as skewed content in windows, browser tabs and text boxes failing to refresh when their content changes. In fact, please excuse typos in this post, because I can't really see what I am typing. :) I also notice that HD video playback performance is no better - perhaps even worse - than prior to installing the drivers. Example of what I see: Here's the output of fglrxinfo: display: :0.0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Radeon HD 3200 Graphics OpenGL version string: 3.3.10237 Compatibility Profile Context Output of lspci | grep -i vga: 01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] I'm on Ubuntu 10.10 with kernel 2.6.35-22-generic-pae. What can I try? Many thanks, -R

  Read the article

• How can I solve display glitches and poor performance with ATI fglrx driver on my ThinkPad X100e?

  - by rewbs

  Hi all, I noticed that video performance on my Thinkpad X100e was very poor compared to Windows 7, so I installed the ATI fglrx proprietary drivers by using the "Additional Drivers" dialogue box. The system has an ATI Radeon Mobility HD 3200 chip. The result of installing the drivers is pretty devastatingly negative, with symptoms such as skewed content in windows, browser tabs and text boxes failing to refresh when their content changes. In fact, please excuse typos in this post, because I can't really see what I am typing. :) I also notice that HD video playback performance is no better - perhaps even worse - than prior to installing the drivers. Example of what I see: Here's the output of fglrxinfo: display: :0.0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Radeon HD 3200 Graphics OpenGL version string: 3.3.10237 Compatibility Profile Context Output of lspci | grep -i vga: 01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] I'm on Ubuntu 10.10 with kernel 2.6.35-22-generic-pae. What can I try? Many thanks, -R

  Read the article

• Please Help with ATI Radeon 4250 and Xinerama

  - by Luis Enrique

  I am using ubuntu 11.10 fresh install and I am having problems making the second screen to work, I remember before I was able to do it by extending the desktop to a larger number like 3840 X 1080 but since I am new I completely forgot how to do it, Now I have a philips 230 E monitor full 1920 X 1080 and a Toshiba tv HDMI and I want to activate the second monitor to be able to use Xinerama but I don't know how to go about this, I want to keep the Phillips as a primary monitor since it's the smaller one and use the TV from time to time to play videos movies and presentations. I installed all the additional drivers and don't know what else to do. I would prefer if I can use a list of exact commands to copy and paste onto the terminal since that is all I know how to use LOL . Thank you so much for your help. If you need more details of my mother board or video card or cpu just ask thank you. Luis

  Read the article

• How to stop fan running always on Asus P8P76LE motherboard with ATI Radeon HD6900

  - by Chris Good

  I'm using Ubuntu 12.04 LTS. I'm not sure if it is the CPU (i7) fan or the video card fan. I've tried using lm-sensors & fancontrol sudo sensors-detect Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `w83627ehf': * ISA bus, address 0x290 Chip `Nuvoton NCT6776F Super IO Sensors' (confidence: 9) Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: # Chip drivers coretemp w83627ehf Like many people, I'm also getting error: /usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed Here is the output of sensors: # sensors radeon-pci-0100 Adapter: PCI adapter temp1: +71.0°C coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +44.0°C (high = +80.0°C, crit = +98.0°C) Core 0: +44.0°C (high = +80.0°C, crit = +98.0°C) Core 1: +40.0°C (high = +80.0°C, crit = +98.0°C) Core 2: +43.0°C (high = +80.0°C, crit = +98.0°C) Core 3: +42.0°C (high = +80.0°C, crit = +98.0°C) I'm hoping some-one has already solved this for my configuration because this seems to be a problem for many people and there are many different suggestions.

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >