Search Results

Search found 1867 results on 75 pages for 'insane 36'.

Page 4/75 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Improving SAS multipath to JBOD performance on Linux

    - by user36825
    Hello all I'm trying to optimize a storage setup on some Sun hardware with Linux. Any thoughts would be greatly appreciated. We have the following hardware: Sun Blade X6270 2* LSISAS1068E SAS controllers 2* Sun J4400 JBODs with 1 TB disks (24 disks per JBOD) Fedora Core 12 2.6.33 release kernel from FC13 (also tried with latest 2.6.31 kernel from FC12, same results) Here's the datasheet for the SAS hardware: http://www.sun.com/storage/storage_networking/hba/sas/PCIe.pdf It's using PCI Express 1.0a, 8x lanes. With a bandwidth of 250 MB/sec per lane, we should be able to do 2000 MB/sec per SAS controller. Each controller can do 3 Gb/sec per port and has two 4 port PHYs. We connect both PHYs from a controller to a JBOD. So between the JBOD and the controller we have 2 PHYs * 4 SAS ports * 3 Gb/sec = 24 Gb/sec of bandwidth, which is more than the PCI Express bandwidth. With write caching enabled and when doing big writes, each disk can sustain about 80 MB/sec (near the start of the disk). With 24 disks, that means we should be able to do 1920 MB/sec per JBOD. multipath { rr_min_io 100 uid 0 path_grouping_policy multibus failback manual path_selector "round-robin 0" rr_weight priorities alias somealias no_path_retry queue mode 0644 gid 0 wwid somewwid } I tried values of 50, 100, 1000 for rr_min_io, but it doesn't seem to make much difference. Along with varying rr_min_io I tried adding some delay between starting the dd's to prevent all of them writing over the same PHY at the same time, but this didn't make any difference, so I think the I/O's are getting properly spread out. According to /proc/interrupts, the SAS controllers are using a "IR-IO-APIC-fasteoi" interrupt scheme. For some reason only core #0 in the machine is handling these interrupts. I can improve performance slightly by assigning a separate core to handle the interrupts for each SAS controller: echo 2 /proc/irq/24/smp_affinity echo 4 /proc/irq/26/smp_affinity Using dd to write to the disk generates "Function call interrupts" (no idea what these are), which are handled by core #4, so I keep other processes off this core too. I run 48 dd's (one for each disk), assigning them to cores not dealing with interrupts like so: taskset -c somecore dd if=/dev/zero of=/dev/mapper/mpathx oflag=direct bs=128M oflag=direct prevents any kind of buffer cache from getting involved. None of my cores seem maxed out. The cores dealing with interrupts are mostly idle and all the other cores are waiting on I/O as one would expect. Cpu0 : 0.0%us, 1.0%sy, 0.0%ni, 91.2%id, 7.5%wa, 0.0%hi, 0.2%si, 0.0%st Cpu1 : 0.0%us, 0.8%sy, 0.0%ni, 93.0%id, 0.2%wa, 0.0%hi, 6.0%si, 0.0%st Cpu2 : 0.0%us, 0.6%sy, 0.0%ni, 94.4%id, 0.1%wa, 0.0%hi, 4.8%si, 0.0%st Cpu3 : 0.0%us, 7.5%sy, 0.0%ni, 36.3%id, 56.1%wa, 0.0%hi, 0.0%si, 0.0%st Cpu4 : 0.0%us, 1.3%sy, 0.0%ni, 85.7%id, 4.9%wa, 0.0%hi, 8.1%si, 0.0%st Cpu5 : 0.1%us, 5.5%sy, 0.0%ni, 36.2%id, 58.3%wa, 0.0%hi, 0.0%si, 0.0%st Cpu6 : 0.0%us, 5.0%sy, 0.0%ni, 36.3%id, 58.7%wa, 0.0%hi, 0.0%si, 0.0%st Cpu7 : 0.0%us, 5.1%sy, 0.0%ni, 36.3%id, 58.5%wa, 0.0%hi, 0.0%si, 0.0%st Cpu8 : 0.1%us, 8.3%sy, 0.0%ni, 27.2%id, 64.4%wa, 0.0%hi, 0.0%si, 0.0%st Cpu9 : 0.1%us, 7.9%sy, 0.0%ni, 36.2%id, 55.8%wa, 0.0%hi, 0.0%si, 0.0%st Cpu10 : 0.0%us, 7.8%sy, 0.0%ni, 36.2%id, 56.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu11 : 0.0%us, 7.3%sy, 0.0%ni, 36.3%id, 56.4%wa, 0.0%hi, 0.0%si, 0.0%st Cpu12 : 0.0%us, 5.6%sy, 0.0%ni, 33.1%id, 61.2%wa, 0.0%hi, 0.0%si, 0.0%st Cpu13 : 0.1%us, 5.3%sy, 0.0%ni, 36.1%id, 58.5%wa, 0.0%hi, 0.0%si, 0.0%st Cpu14 : 0.0%us, 4.9%sy, 0.0%ni, 36.4%id, 58.7%wa, 0.0%hi, 0.0%si, 0.0%st Cpu15 : 0.1%us, 5.4%sy, 0.0%ni, 36.5%id, 58.1%wa, 0.0%hi, 0.0%si, 0.0%st Given all this, the throughput reported by running "dstat 10" is in the range of 2200-2300 MB/sec. Given the math above I would expect something in the range of 2*1920 ~= 3600+ MB/sec. Does anybody have any idea where my missing bandwidth went? Thanks!

    Read the article

  • How to find keycodes for Fn + keys?

    - by budwiser
    I'm trying to find out the keycode for Fn+? keypress (left arrow). Xev outputs FocusOut event, serial 36, synthetic NO, window 0x3c00001,    mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 36, synthetic NO, window 0x3c00001,    mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 36, synthetic NO, window 0x0,    keys:  4294967213 0   0   0   0   0   0   0   0   0   0   0   0   0   0   0              0   0   0   0   0   0   0   0   0   0   0   0   0   0   0   0   If it is telling me the keycode here, I'm not able to interpret it so help would be appreciated. I'm also curious for finding out if it's possible to bind something to Fn+Del but when trying out this combination, Xev outputs KeyPress event, serial 36, synthetic NO, window 0x3c00001, root 0xad, subw 0x0, time 1984903, (-666,480), root:(53,533), state 0x0, keycode 119 (keysym 0xffff, Delete), same_screen YES, XLookupString gives 1 bytes: (7f) " " XmbLookupString gives 1 bytes: (7f) " " XFilterEvent returns: False KeyRelease event, serial 36, synthetic NO, window 0x3c00001, root 0xad, subw 0x0, time 1985008, (-666,480), root:(53,533), state 0x0, keycode 119 (keysym 0xffff, Delete), same_screen YES, XLookupString gives 1 bytes: (7f) " " XFilterEvent returns: False which is exactly the same as pressing del without Fn. So, summary for short How can I find keycode for Fn+? (left arrow)? Is it even possible to bind something to Fn+Del or am I facing windmills here?

    Read the article

  • Unable to sign in. How to debug?

    - by Dmitriy Budnik
    I had to reboot system with reset button. After reboot I can't sign in. When I enter my password It seems like X-server just restarts. I can sing in as guest and also I can sign in in text TTY. Here is first 150 lines of my lightdm.log: [+0.04s] DEBUG: Logging to /var/log/lightdm/lightdm.log [+0.04s] DEBUG: Starting Light Display Manager 1.2.1, UID=0 PID=1070 [+0.04s] DEBUG: Loaded configuration from /etc/lightdm/lightdm.conf [+0.04s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager [+0.04s] DEBUG: Registered seat module xlocal [+0.04s] DEBUG: Registered seat module xremote [+0.04s] DEBUG: Adding default seat [+0.04s] DEBUG: Starting seat [+0.04s] DEBUG: Starting new display for automatic login as user dmytro [+0.04s] DEBUG: Starting local X display [+3.64s] DEBUG: X server :0 will replace Plymouth [+3.66s] DEBUG: Using VT 7 [+3.66s] DEBUG: Activating VT 7 [+3.66s] DEBUG: Logging to /var/log/lightdm/x-0.log [+3.66s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0 [+3.66s] DEBUG: Launching X Server [+3.66s] DEBUG: Launching process 1154: /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background none [+3.66s] DEBUG: Waiting for ready signal from X server :0 [+3.66s] DEBUG: Acquired bus name org.freedesktop.DisplayManager [+3.66s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0 [+10.78s] DEBUG: Got signal 10 from process 1154 [+10.78s] DEBUG: Got signal from X server :0 [+10.78s] DEBUG: Stopping Plymouth, X server is ready [+10.80s] DEBUG: Connecting to XServer :0 [+10.80s] DEBUG: Automatically logging in user dmytro [+10.80s] DEBUG: Started session 1303 with service 'lightdm-autologin', username 'dmytro' [+13.22s] DEBUG: Session 1303 authentication complete with return value 0: Success [+13.26s] DEBUG: Autologin user dmytro authorized [+13.27s] DEBUG: Autologin using session ubuntu [+14.44s] DEBUG: Dropping privileges to uid 1000 [+14.48s] DEBUG: Restoring privileges [+14.49s] DEBUG: Dropping privileges to uid 1000 [+14.49s] DEBUG: Writing /home/dmytro/.dmrc [+14.61s] DEBUG: Restoring privileges [+14.81s] DEBUG: Starting session ubuntu as user dmytro [+14.81s] DEBUG: Session 1303 running command /usr/sbin/lightdm-session gnome-session --session=ubuntu [+15.76s] DEBUG: New display ready, switching to it [+15.76s] DEBUG: Activating VT 7 [+15.76s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session0 [+16.63s] DEBUG: Session 1303 exited with return value 0 [+16.63s] DEBUG: User session quit [+16.63s] DEBUG: Stopping display [+16.63s] DEBUG: Sending signal 15 to process 1154 [+17.19s] DEBUG: Process 1154 exited with return value 0 [+17.19s] DEBUG: X server stopped [+17.19s] DEBUG: Removing X server authority /var/run/lightdm/root/:0 [+17.19s] DEBUG: Releasing VT 7 [+17.19s] DEBUG: Display server stopped [+17.19s] DEBUG: Display stopped [+17.19s] DEBUG: Active display stopped, switching to greeter [+17.19s] DEBUG: Switching to greeter [+17.19s] DEBUG: Starting new display for greeter [+17.19s] DEBUG: Starting local X display [+17.19s] DEBUG: Using VT 7 [+17.19s] DEBUG: Logging to /var/log/lightdm/x-0.log [+17.19s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0 [+17.19s] DEBUG: Launching X Server [+17.19s] DEBUG: Launching process 1563: /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch [+17.19s] DEBUG: Waiting for ready signal from X server :0 [+17.48s] DEBUG: Got signal 10 from process 1563 [+17.48s] DEBUG: Got signal from X server :0 [+17.48s] DEBUG: Connecting to XServer :0 [+17.48s] DEBUG: Starting greeter [+17.48s] DEBUG: Started session 1575 with service 'lightdm', username 'lightdm' [+17.61s] DEBUG: Session 1575 authentication complete with return value 0: Success [+17.61s] DEBUG: Greeter authorized [+17.61s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log [+17.68s] DEBUG: Session 1575 running command /usr/lib/lightdm/lightdm-greeter-session /usr/sbin/unity-greeter [+20.86s] DEBUG: Greeter connected version=1.2.1 [+20.86s] DEBUG: Greeter connected, display is ready [+20.86s] DEBUG: New display ready, switching to it [+20.86s] DEBUG: Activating VT 7 [+20.86s] DEBUG: Stopping greeter display being switched from [+24.90s] DEBUG: Greeter start authentication for dmytro [+24.90s] DEBUG: Started session 1746 with service 'lightdm', username 'dmytro' [+25.10s] DEBUG: Session 1746 got 1 message(s) from PAM [+25.10s] DEBUG: Prompt greeter with 1 message(s) [+31.87s] DEBUG: Continue authentication [+33.75s] DEBUG: Session 1746 authentication complete with return value 7: Authentication failure [+33.75s] DEBUG: Authenticate result for user dmytro: Authentication failure [+33.75s] DEBUG: Greeter start authentication for dmytro [+33.75s] DEBUG: Session 1746: Sending SIGTERM [+33.75s] DEBUG: Started session 2264 with service 'lightdm', username 'dmytro' [+33.75s] DEBUG: Session 2264 got 1 message(s) from PAM [+33.75s] DEBUG: Prompt greeter with 1 message(s) [+36.41s] DEBUG: Continue authentication [+36.53s] DEBUG: Session 2264 authentication complete with return value 0: Success [+36.53s] DEBUG: Authenticate result for user dmytro: Success [+36.54s] DEBUG: User dmytro authorized [+36.54s] DEBUG: Greeter requests session ubuntu [+36.54s] DEBUG: Using session ubuntu [+36.54s] DEBUG: Stopping greeter [+36.54s] DEBUG: Session 1575: Sending SIGTERM [+37.41s] DEBUG: Greeter closed communication channel [+37.41s] DEBUG: Session 1575 exited with return value 0 [+37.41s] DEBUG: Greeter quit [+37.42s] DEBUG: Dropping privileges to uid 1000 [+37.42s] DEBUG: Restoring privileges [+37.43s] DEBUG: Dropping privileges to uid 1000 [+37.43s] DEBUG: Writing /home/dmytro/.dmrc [+38.35s] DEBUG: Restoring privileges [+40.37s] DEBUG: Starting session ubuntu as user dmytro [+40.37s] DEBUG: Session 2264 running command /usr/sbin/lightdm-session gnome-session --session=ubuntu [+40.39s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session1 [+50.78s] DEBUG: Session 2264 exited with return value 0 [+50.78s] DEBUG: User session quit [+50.78s] DEBUG: Stopping display [+50.78s] DEBUG: Sending signal 15 to process 1563 [+51.53s] DEBUG: Process 1563 exited with return value 0 [+51.53s] DEBUG: X server stopped [+51.53s] DEBUG: Removing X server authority /var/run/lightdm/root/:0 [+51.53s] DEBUG: Releasing VT 7 [+51.53s] DEBUG: Display server stopped [+51.53s] DEBUG: Display stopped [+51.53s] DEBUG: Active display stopped, switching to greeter [+51.53s] DEBUG: Switching to greeter [+51.53s] DEBUG: Starting new display for greeter [+51.53s] DEBUG: Starting local X display [+51.53s] DEBUG: Using VT 7 [+51.53s] DEBUG: Logging to /var/log/lightdm/x-0.log [+51.53s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0 [+51.53s] DEBUG: Launching X Server [+51.53s] DEBUG: Launching process 2894: /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch [+51.53s] DEBUG: Waiting for ready signal from X server :0 [+51.75s] DEBUG: Got signal 10 from process 2894 [+51.75s] DEBUG: Got signal from X server :0 [+51.75s] DEBUG: Connecting to XServer :0 [+51.75s] DEBUG: Starting greeter [+51.75s] DEBUG: Started session 2898 with service 'lightdm', username 'lightdm' [+51.76s] DEBUG: Session 2898 authentication complete with return value 0: Success [+51.76s] DEBUG: Greeter authorized [+51.76s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log [+51.76s] DEBUG: Session 2898 running command /usr/lib/lightdm/lightdm-greeter-session /usr/sbin/unity-greeter [+53.26s] DEBUG: Greeter connected version=1.2.1 [+53.26s] DEBUG: Greeter connected, display is ready [+53.26s] DEBUG: New display ready, switching to it [+53.26s] DEBUG: Activating VT 7 [+53.26s] DEBUG: Stopping greeter display being switched from [+54.17s] DEBUG: Greeter start authentication for dmytro [+54.17s] DEBUG: Started session 3152 with service 'lightdm', username 'dmytro' [+54.18s] DEBUG: Session 3152 got 1 message(s) from PAM [+54.18s] DEBUG: Prompt greeter with 1 message(s) [+58.61s] DEBUG: Continue authentication [+58.65s] DEBUG: Session 3152 authentication complete with return value 0: Success [+58.65s] DEBUG: Authenticate result for user dmytro: Success [+58.66s] DEBUG: User dmytro authorized [+58.66s] DEBUG: Greeter requests session ubuntu [+58.66s] DEBUG: Using session ubuntu [+58.66s] DEBUG: Stopping greeter [+58.66s] DEBUG: Session 2898: Sending SIGTERM How can I fix it? What other .log files could possibly give me a clue? Update: Possibly it's duplicate of Desktop login fails, terminal works

    Read the article

  • Ubuntu 12.04 + Raid0 + Windows 7 not loading

    - by Douglas
    please someone help me.... (Sorry for my english) Hi, I have a Pc with 2 Hd (1Tb each) on Raid0. I had a Windows 7 64bits working for several months. When I installed the Windows I let a 100Gb partition empty to install Ubuntu someday. I was using Linux on a Virtualbox, but this week I tried to install Ubuntu 12.04 in this 100Gb partition. I used the Ubuntu alternate cd, because the 'normal' cd was giving me trouble with the Raid0. The grub installation always reported a error. After a lot of work I found that I nedded to install grub on partition /dev/mapper/isw_chjbfeec_DougRaid1 (see Bootinfo below). The Windows installation created a 100Mb boot partition, so I needed to install grub in this partition. Now I have the Ubuntu working 100% ok. The problem is, the Windows is not booting! The windows option is present on the grub menu, but when I choose the windows option there is a black screen and after that the grub is reloaded. My Bootinfo is: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks in partition 1 for /boot/grub. => Grub2 (v1.99) is installed in the MBR of /dev/mapper/isw_chjbfeec_DougRaid and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks in partition 1 for /boot/grub. sda1: __________________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unknown filesystem type '' sda2: __________________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unknown filesystem type '' mount: unknown filesystem type '' sda3: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: isw_chjbfeec_DougRaid1: ________________________________________________________ File system: ntfs Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of isw_chjbfeec_DougRaid1 and looks at sector 3841862992 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. No errors found in the Boot Parameter Block. Operating System: Boot files: /grldr /bootmgr /Boot/BCD /grldr isw_chjbfeec_DougRaid2: ________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /Windows/System32/winload.exe isw_chjbfeec_DougRaid3: ________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: isw_chjbfeec_DougRaid5: ________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img isw_chjbfeec_DougRaid6: ________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS /dev/sda2 206,848 3,686,402,047 3,686,195,200 7 NTFS / exFAT / HPFS /dev/sda3 3,686,402,558 3,907,039,743 220,637,186 5 Extended Invalid MBR Signature found. EBR refers to a location outside the hard drive. /dev/sda2 ends after the last sector of /dev/sda /dev/sda3 ends after the last sector of /dev/sda Drive: isw_chjbfeec_DougRaid _____________________________________________________________________ Disk /dev/mapper/isw_chjbfeec_DougRaid: 2000.4 GB, 2000404348928 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907039744 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/mapper/isw_chjbfeec_DougRaid1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS /dev/mapper/isw_chjbfeec_DougRaid2 206,848 3,686,402,047 3,686,195,200 7 NTFS / exFAT / HPFS /dev/mapper/isw_chjbfeec_DougRaid3 3,686,402,558 3,907,039,743 220,637,186 5 Extended /dev/mapper/isw_chjbfeec_DougRaid5 3,686,402,560 3,881,876,479 195,473,920 83 Linux /dev/mapper/isw_chjbfeec_DougRaid6 3,881,876,992 3,907,039,743 25,162,752 82 Linux swap / Solaris "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/mapper/isw_chjbfeec_DougRaid1 C89C73D19C73B910 ntfs Reservado pelo Sistema /dev/mapper/isw_chjbfeec_DougRaid2 6830883A3088116C ntfs /dev/mapper/isw_chjbfeec_DougRaid5 bbab868a-ea53-4be3-ba7d-2737fe6cb24c ext4 /dev/mapper/isw_chjbfeec_DougRaid6 7a830a3c-88fb-4cba-80dc-f32e08abfd5b swap /dev/sda isw_raid_member /dev/sdb isw_raid_member /dev/sr0 iso9660 Windows7x86x64SK ========================= "ls -R /dev/mapper/" output: ========================= /dev/mapper: control isw_chjbfeec_DougRaid isw_chjbfeec_DougRaid1 isw_chjbfeec_DougRaid2 isw_chjbfeec_DougRaid3 isw_chjbfeec_DougRaid5 isw_chjbfeec_DougRaid6 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/mapper/isw_chjbfeec_DougRaid5 / ext4 (rw,errors=remount-ro) /dev/sr0 /media/Windows7x86x64SK iso9660 (ro,nosuid,nodev,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500,uhelper=udisks) ================= isw_chjbfeec_DougRaid1/grldr embedded menu: ================== -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- ================== isw_chjbfeec_DougRaid5/boot/grub/grub.cfg: ================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="$1" if [ "$1" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-24-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c linux /boot/vmlinuz-3.2.0-24-generic-pae root=UUID=bbab868a-ea53-4be3-ba7d-2737fe6cb24c ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-24-generic-pae } menuentry 'Ubuntu, with Linux 3.2.0-24-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c echo 'Loading Linux 3.2.0-24-generic-pae ...' linux /boot/vmlinuz-3.2.0-24-generic-pae root=UUID=bbab868a-ea53-4be3-ba7d-2737fe6cb24c ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-24-generic-pae } submenu "Previous Linux versions" { menuentry 'Ubuntu, with Linux 3.2.0-23-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c linux /boot/vmlinuz-3.2.0-23-generic-pae root=UUID=bbab868a-ea53-4be3-ba7d-2737fe6cb24c ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-23-generic-pae } menuentry 'Ubuntu, with Linux 3.2.0-23-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c echo 'Loading Linux 3.2.0-23-generic-pae ...' linux /boot/vmlinuz-3.2.0-23-generic-pae root=UUID=bbab868a-ea53-4be3-ba7d-2737fe6cb24c ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-23-generic-pae } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober_proxy ### menuentry "Windows 7 (loader) (on /dev/mapper/isw_chjbfeec_DougRaid1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(sda,msdos1)' search --no-floppy --fs-uuid --set=root C89C73D19C73B910 chainloader +1 } ### END /etc/grub.d/30_os-prober_proxy ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- ====================== isw_chjbfeec_DougRaid5/etc/fstab: ======================= -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/mapper/isw_chjbfeec_DougRaid5 / ext4 errors=remount-ro 0 1 /dev/mapper/isw_chjbfeec_DougRaid6 none swap sw 0 0 -------------------------------------------------------------------------------- ========== isw_chjbfeec_DougRaid5: Location of files loaded by Grub: =========== GiB - GB File Fragment(s) = boot/grub/core.img 1 = boot/grub/grub.cfg 1 = boot/initrd.img-3.2.0-23-generic-pae 2 = boot/initrd.img-3.2.0-24-generic-pae 2 = boot/vmlinuz-3.2.0-23-generic-pae 1 = boot/vmlinuz-3.2.0-24-generic-pae 1 = initrd.img 2 = initrd.img.old 2 = vmlinuz 1 = vmlinuz.old 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda1 Unknown BootLoader on sda2 Unknown BootLoader on sda3 =============================== StdErr Messages: =============================== xz: (stdin): Compressed data is corrupt xz: (stdin): Compressed data is corrupt hexdump: /dev/sda1: No such file or directory hexdump: /dev/sda1: No such file or directory hexdump: /dev/sda2: No such file or directory hexdump: /dev/sda2: No such file or directory hexdump: /dev/sda3: No such file or directory hexdump: /dev/sda3: No such file or directory xz: (stdin): Compressed data is corrupt awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in How we can see the Windows part at grub is: menuentry "Windows 7 (loader) (on /dev/mapper/isw_chjbfeec_DougRaid1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(sda,msdos1)' search --no-floppy --fs-uuid --set=root C89C73D19C73B910 chainloader +1 } I tried a lot of combinations at the line: set root='(sda,msdos1)' , but no success I tried to change uuid to the /dev/mapper/isw_chjbfeec_DougRaid2 uuid, but the grub reports a error. I dont know what to do now. I really need to boot my windows partition. Someone knows what to do? Thanks........

    Read the article

  • Design pattern and best practices

    - by insane-36
    I am an iphone developer. I am quite confident on developing iphone application with some minimal feature. I would consider myself as a fair application developer but the code I write is not so much structured. I make vey little use of MVC because I dont seem to find places to impose MVC. Most of the time, I create application with viewcontrollers and very few models only. How could I improve the skill for making my code more reusable, standard, easy and maintainable. I have seen few books on design patterns and tried few chapters myself but I dont seem to skip my habit. I know few of them but I am not being able to apply those patterns into my app. What is the best way to learn the design patterns and coding habit. Any kind of suggestion is warmly welcomed.

    Read the article

  • How to find keycodes for Fn + keys in Ubuntu 11.10

    - by budwiser
    I'm trying to find out the keycode for Fn+? keypress (left arrow). Xev outputs FocusOut event, serial 36, synthetic NO, window 0x3c00001,    mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 36, synthetic NO, window 0x3c00001,    mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 36, synthetic NO, window 0x0,    keys:  4294967213 0   0   0   0   0   0   0   0   0   0   0   0   0   0   0              0   0   0   0   0   0   0   0   0   0   0   0   0   0   0   0   If it is telling me the keycode here, I'm not able to interpret it so help would be appreciated. I'm also curious for finding out if it's possible to bind something to Fn+Del but when trying out this combination, Xev outputs KeyPress event, serial 36, synthetic NO, window 0x3c00001, root 0xad, subw 0x0, time 1984903, (-666,480), root:(53,533), state 0x0, keycode 119 (keysym 0xffff, Delete), same_screen YES, XLookupString gives 1 bytes: (7f) " " XmbLookupString gives 1 bytes: (7f) " " XFilterEvent returns: False KeyRelease event, serial 36, synthetic NO, window 0x3c00001, root 0xad, subw 0x0, time 1985008, (-666,480), root:(53,533), state 0x0, keycode 119 (keysym 0xffff, Delete), same_screen YES, XLookupString gives 1 bytes: (7f) " " XFilterEvent returns: False which is exactly the same as pressing del without Fn. So, summary for short How can I find keycode for Fn+? (left arrow)? Is it even possible to bind something to Fn+Del or am I facing windmills here?

    Read the article

  • error while trying to play .mp4 file

    - by Husni
    after agree to download and install extra multimedia plugins, it says package dependency can not be resolved, with below error: The following packages have unmet dependencies: gstreamer0.10-plugins-bad:i386: Depends: libc6 (>= 2.15) but 2.15-0ubuntu20 is to be installed Depends: libcairo2 (>= 1.2.4) but 1.12.3+git20120608.f228769d-0ubuntu0ricotz~quantal0 is to be installed Depends: libcdaudio1 (>= 0.99.12p2) but 0.99.12p2-12 is to be installed Depends: libcurl3-gnutls (>= 7.16.2) but 7.27.0-1ubuntu1 is to be installed Depends: libdvdnav4 (>= 4.2.0+20120524) but 4.2.0+20120524-2 is to be installed Depends: libfaad2 (>= 2.7) but 2.7-8 is to be installed Depends: libgcc1 (>= 1:4.1.1) but 1:4.7.2-2ubuntu1 is to be installed Depends: libglib2.0-0 (>= 2.31.8) but 2.34.0-1ubuntu1 is to be installed Depends: libgsm1 (>= 1.0.13) but 1.0.13-4 is to be installed Depends: libgstreamer-plugins-bad0.10-0 (= 0.10.23-7ubuntu1) but 0.10.23-7ubuntu1 is to be installed Depends: libgstreamer-plugins-base0.10-0 (>= 0.10.36) but 0.10.36-1ubuntu1 is to be installed Depends: libgstreamer0.10-0 (>= 0.10.36) but 0.10.36-1ubuntu2 is to be installed Depends: libmpcdec6 (>= 1:0.1~r435) but 2:0.1~r459-1ubuntu1 is to be installed Depends: libopenal1 (>= 1:1.13) but 1:1.14-4ubuntu1 is to be installed Depends: liborc-0.4-0 (>= 1:0.4.16) but 1:0.4.16-2 is to be installed Depends: libpng12-0 (>= 1.2.13-4) but 1.2.49-1ubuntu1 is to be installed Depends: librsvg2-2 (>= 2.14.4) but 2.36.3-0ubuntu1 is to be installed Depends: librtmp0 (>= 2.3) but 2.4+20111222.git4e06e21-1 is to be installed Depends: libschroedinger-1.0-0 (>= 1.0.9) but 1.0.11-2 is to be installed Depends: libsndfile1 (>= 1.0.20) but 1.0.25-5 is to be installed Depends: libssl1.0.0 (>= 1.0.0) but 1.0.1c-3ubuntu2 is to be installed Depends: libstdc++6 (>= 4.1.1) but 4.7.2-2ubuntu1 is to be installed Depends: libvpx1 (>= 1.0.0) but 1.1.0-1 is to be installed Depends: libxvidcore4 (>= 1.2.2) but 2:1.3.2-9 is to be installed

    Read the article

  • MVC design patterns

    - by insane-36
    I have an application and it does not use a very good structure. However it seems to me that I have tried to stick to mvc design pattern but a senior engineer claims that I have no design patterns and code are mesh. How I have structured the code : I have couple of nsmanagedobject model classes which represents model in my case and a reskit library which encapsulates the nsurlconnection and url request. I fetch the request from the view controller itself and then when the request get completed I create predicate and then populate it in tableview. Wherever I need custom view either I create it in nib or create in a custom subclass of UIView. I have use delegation pattern and notification to communication to view controller, views and block callback with restkit. But, the senior engineer is very new to ios. He has been doing it for 2 months now but he is a good java programmer. So, what is mvc pattern ? Is core data model not working as a model objects, view controller as controller and views. I dont seem to find any other places or any other cases to create my own model object since the most of the models are used as NSManagedObject subclass.

    Read the article

  • Longitudinal Redundancy Check fails

    - by PaulH
    I have an application that decodes data from a magnetic stripe reader. But, I'm having difficulty getting my calculated LRC check byte to match the one on the cards. If I were to grab 3 cards each with 3 tracks, I would guess the algorithm below would work on 4 of the 9 tracks in those cards. The algorithm I'm using looks like this (C#): private static char GetLRC(string s, int start, int end) { int result = 0; for (int i = start; i <= end; i++) { result ^= Convert.ToByte(s[i]); } return Convert.ToChar(result); } This is an example of track 3 data that fails the check. On this card, track 2 matched, but track 1 also failed. 0 1 2 3 4 5 6 7 8 9 A B C D E F 00 3 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 10 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 7 20 7 7 7 7 7 7 7 7 7 8 8 8 8 8 8 8 30 8 8 8 9 9 9 9 9 9 9 9 9 9 0 0 0 40 0 0 0 0 0 0 0 1 2 3 4 1 1 1 1 1 50 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 60 3 3 3 3 3 3 3 3 The sector delimiter is ';' and it ends with a '?'. The LRC byte from this track is 0x30. Unfortunately, the algorithm above computes an LRC of 0x00 per the following calculation (apologies for its length. I want to be thorough): 00 ^ 3b = 3b ';' 3b ^ 33 = 08 08 ^ 34 = 3c 3c ^ 34 = 08 08 ^ 34 = 3c 3c ^ 34 = 08 08 ^ 34 = 3c 3c ^ 34 = 08 08 ^ 34 = 3c 3c ^ 34 = 08 08 ^ 34 = 3c 3c ^ 34 = 08 08 ^ 35 = 3d 3d ^ 35 = 08 08 ^ 35 = 3d 3d ^ 35 = 08 08 ^ 35 = 3d 3d ^ 35 = 08 08 ^ 35 = 3d 3d ^ 35 = 08 08 ^ 35 = 3d 3d ^ 35 = 08 08 ^ 36 = 3e 3e ^ 36 = 08 08 ^ 36 = 3e 3e ^ 36 = 08 08 ^ 36 = 3e 3e ^ 36 = 08 08 ^ 36 = 3e 3e ^ 36 = 08 08 ^ 36 = 3e 3e ^ 36 = 08 08 ^ 37 = 3f 3f ^ 37 = 08 08 ^ 37 = 3f 3f ^ 37 = 08 08 ^ 37 = 3f 3f ^ 37 = 08 08 ^ 37 = 3f 3f ^ 37 = 08 08 ^ 37 = 3f 3f ^ 37 = 08 08 ^ 38 = 30 30 ^ 38 = 08 08 ^ 38 = 30 30 ^ 38 = 08 08 ^ 38 = 30 30 ^ 38 = 08 08 ^ 38 = 30 30 ^ 38 = 08 08 ^ 38 = 30 30 ^ 38 = 08 08 ^ 39 = 31 31 ^ 39 = 08 08 ^ 39 = 31 31 ^ 39 = 08 08 ^ 39 = 31 31 ^ 39 = 08 08 ^ 39 = 31 31 ^ 39 = 08 08 ^ 39 = 31 31 ^ 39 = 08 08 ^ 30 = 38 38 ^ 30 = 08 08 ^ 30 = 38 38 ^ 30 = 08 08 ^ 30 = 38 38 ^ 30 = 08 08 ^ 30 = 38 38 ^ 30 = 08 08 ^ 30 = 38 38 ^ 30 = 08 08 ^ 31 = 39 39 ^ 32 = 0b 0b ^ 33 = 38 38 ^ 34 = 0c 0c ^ 31 = 3d 3d ^ 31 = 0c 0c ^ 31 = 3d 3d ^ 31 = 0c 0c ^ 31 = 3d 3d ^ 31 = 0c 0c ^ 31 = 3d 3d ^ 31 = 0c 0c ^ 31 = 3d 3d ^ 31 = 0c 0c ^ 32 = 3e 3e ^ 32 = 0c 0c ^ 32 = 3e 3e ^ 32 = 0c 0c ^ 32 = 3e 3e ^ 32 = 0c 0c ^ 32 = 3e 3e ^ 32 = 0c 0c ^ 32 = 3e 3e ^ 32 = 0c 0c ^ 33 = 3f 3f ^ 33 = 0c 0c ^ 33 = 3f 3f ^ 33 = 0c 0c ^ 33 = 3f 3f ^ 33 = 0c 0c ^ 33 = 3f 3f ^ 33 = 0c 0c ^ 33 = 3f 3f ^ 3f = 00 '?' If anybody can point out how to fix my algorithm, I would appreciate it. Thanks, PaulH

    Read the article

  • Sysprep and Capture task sequence failing using MDT 2010

    - by Nic Young
    I have created a Windows Deployment Services server in Windows 2008 R2. When I originally set it up I was able to successfully use MDT 2010 to create my boot images as well as creating task sequences that would sysprep and capture, and deploy my custom .wim files. Everything was working perfectly. About a month later I boot up my Windows 7 x86 image and run Windows updates to keep my image up to date. I then go and run my sysprep and capture task sequence and I get the following errors: I searched online for the cause of this error message and it just seems to be a generic permission denied type of error message. I then decided to completely rebuild my VM image from scratch and try again. I am still getting the same error messages as before. The following is what I have tried troubleshooting this issue: Troubleshooting: I have ensured that that UAC and the firewall is turned completely off when trying to capture the image. I have tried recreating the task sequence and making sure that the deployment share is updated. I have ensured that the local Administrator account is enabled and has the same password as specified in the task sequence. I have tried joining the computer to the domain and running the task sequence and I get a different error: I have attempted to run the script from the command prompt with "Run as Administrator" and I still receive the same errors above. For testing purposes I have ensured that Everyone has read/write access to my deployment share. I have spent days on trying to resolve this to no avail. Any ideas? EDIT: Below is the log info from C:\Windows\Deploymentlogs\BDD.log as requested. <![LOG[LTI Windows PE applied successfully]LOG]!><time="11:48:34.000+000" date="07-25-2012" component="LTIApply" context="" type="1" thread="" file="LTIApply"> <![LOG[LTIApply processing completed successfully.]LOG]!><time="11:48:34.000+000" date="07-25-2012" component="LTIApply" context="" type="1" thread="" file="LTIApply"> <![LOG[Microsoft Deployment Toolkit version: 6.0.2223.0]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[The task sequencer log is located at C:\Users\nicy\AppData\Local\Temp\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[Processing drivers for an X86 operating system.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[TargetOS is the current SystemDrive]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[Property DriverCleanup is now = DONE]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[Compare Image processor Type with Original [X86] = [X86].]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[Prepare machine for Sysprep.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[No driver actions can be taken for OS Images installed from *.wim files.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[ZTIDrivers processing completed successfully.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[Command completed, return code = -2147467259]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[Litetouch deployment failed, Return Code = -2147467259 0x80004005]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="3" thread="" file="LiteTouch"> <![LOG[For more information, consult the task sequencer log ...\SMSTS.LOG.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[Property RetVal is now = -2147467259]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[Unable to copy log to the network as no SLShare value was specified.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[CleanStartItems Complete]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[Unregistering TSCore.dll.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[About to run command: wscript.exe "\\server\deploymentshare$\Scripts\LTICleanup.wsf"]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[Microsoft Deployment Toolkit version: 6.0.2223.0]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Removing AutoAdminLogon registry entries]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[VSSMaxSize not specified using 5% of volume.]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Logs contained 7 errors and 0 warnings.]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Stripping BDD commands from unattend.xml template.]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Modified unattend.xml saved to C:\windows\panther\unattend.xml]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Checking mapped network drive.]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[testing drive Z: mapped to \\server\deploymentshare$]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Disconnecting drive Z: mapped to \\server\deploymentshare$]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Cleaning up C:\MININT directory.]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Cleaning up TOOLS, SCRIPTS, and PACKAGES directories.]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">

    Read the article

  • Windows cant repair even with sfc /scannow

    - by GeekyDewd
    Clean install of windows 8, then installed the windows 8.1 update (after all other updates). CBS Log: CBS Log on Google Drive Important pieces of the log: Found: {l:32 b:LrOXAtJDCCTN+z+D1bKj7ogYIrX7sfCCDh+wVBfsrCQ=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=} 2014-05-17 21:35:38, Info CSI 00000505 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch 2014-05-17 21:35:40, Info CSI 00000506 Hashes for file member \SystemRoot\WinSxS\amd64_prncacla.inf_31bf3856ad364e35_6.3.9600.16384_none_9590ba64d5b91f79\Amd64\CNBJ2530.DPB do not match actual file [l:36{18}]"Amd64\CNBJ2530.DPB" : Found: {l:32 b:LrOXAtJDCCTN+z+D1bKj7ogYIrX7sfCCDh+wVBfsrCQ=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=} 2014-05-17 21:35:40, Info CSI 00000507 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch 2014-05-17 21:35:40, Info CSI 00000508 [SR] This component was referenced by [l:186{93}]"Microsoft-Windows-Printer-Drivers-Package~31bf3856ad364e35~amd64~~6.3.9600.16384.INF_prncacla" 2014-05-17 21:35:43, Info CSI 00000509 [DIRSD OWNER WARNING] Directory [ml:520{260},l:138{69}]"\??\C:\WINDOWS\System32\WindowsPowerShell\v1.0\Modules\NetSecurity\en" is not owned but specifies SDDL in component Networking-MPSSVC-WMI.Resources, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral And: Found: {l:32 b:LrOXAtJDCCTN+z+D1bKj7ogYIrX7sfCCDh+wVBfsrCQ=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=} 2014-05-17 21:42:12, Info CSI 00000888 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch 2014-05-17 21:42:13, Info CSI 00000889 Hashes for file member \SystemRoot\WinSxS\amd64_prncacla.inf_31bf3856ad364e35_6.3.9600.16384_none_9590ba64d5b91f79\Amd64\CNBJ2530.DPB do not match actual file [l:36{18}]"Amd64\CNBJ2530.DPB" : Found: {l:32 b:LrOXAtJDCCTN+z+D1bKj7ogYIrX7sfCCDh+wVBfsrCQ=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=} 2014-05-17 21:42:13, Info CSI 0000088a [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch 2014-05-17 21:42:13, Info CSI 0000088b [SR] This component was referenced by [l:186{93}]"Microsoft-Windows-Printer-Drivers-Package~31bf3856ad364e35~amd64~~6.3.9600.16384.INF_prncacla" 2014-05-17 21:42:13, Info CSI 0000088c [SR] Repair complete

    Read the article

  • Process does ICMP port scan on my OSX box and I am afraid my Mac got a virus

    - by Jamgold
    I noticed that my 10.6.6 box has some process sending out ICMP messages to "random" hosts, which concerns me a lot. when doing a tcpdump icmp I see a lot of the following 15:41:14.738328 IP macpro > bzq-109-66-184-49.red.bezeqint.net: ICMP macpro udp port websm unreachable, length 36 15:41:15.110381 IP macpro > 99-110-211-191.lightspeed.sntcca.sbcglobal.net: ICMP macpro udp port 54045 unreachable, length 36 15:41:23.458831 IP macpro > 188.122.242.115: ICMP macpro udp port websm unreachable, length 36 15:41:23.638731 IP macpro > 61.85-200-21.bkkb.no: ICMP macpro udp port websm unreachable, length 36 15:41:27.329981 IP macpro > c-98-234-88-192.hsd1.ca.comcast.net: ICMP macpro udp port 54045 unreachable, length 36 15:41:29.349586 IP macpro > c-98-234-88-192.hsd1.ca.comcast.net: ICMP macpro udp port 54045 unreachable, length 36 I got suspicious when my router notified me about a lot of ICMP messages that don't get a response [INFO] Mon Jan 10 16:31:47 2011 Blocked outgoing ICMP packet (ICMP type 3) from 192.168.1.189 to 212.25.57.90 Does anyone know how to trace which process (or worse kernel module) might be responsible for this? I rebooted and logged in with a virgin user account and tcpdump showed the same results. Any dtrace magic welcome.

    Read the article

  • Some process does ICMP port scan on my OSX box and I am afraid my Mac got a virus

    - by Jamgold
    I noticed that my 10.6.6 box has some process send out ICMP messages to "random" hosts, which concerns me a lot. when doing a tcpdump icmp I see a lot of the following 15:41:14.738328 IP macpro > bzq-109-66-184-49.red.bezeqint.net: ICMP macpro udp port websm unreachable, length 36 15:41:15.110381 IP macpro > 99-110-211-191.lightspeed.sntcca.sbcglobal.net: ICMP macpro udp port 54045 unreachable, length 36 15:41:23.458831 IP macpro > 188.122.242.115: ICMP macpro udp port websm unreachable, length 36 15:41:23.638731 IP macpro > 61.85-200-21.bkkb.no: ICMP macpro udp port websm unreachable, length 36 15:41:27.329981 IP macpro > c-98-234-88-192.hsd1.ca.comcast.net: ICMP macpro udp port 54045 unreachable, length 36 15:41:29.349586 IP macpro > c-98-234-88-192.hsd1.ca.comcast.net: ICMP macpro udp port 54045 unreachable, length 36 I got suspicious when my router notified me about a lot of ICMP messages that don't get a response Does anyone know how to trace which process (or worse kernel module) might be responsible for this? I rebooted and logged in with a virgin user account and tcpdump showed the same results. Any dtrace magic welcome. Thanks in advance

    Read the article

  • Some process does ICMP port scan on my OSX box and I am afraid my Mac got a virus

    - by Jamgold
    I noticed that my 10.6.6 box has some process send out ICMP messages to "random" hosts, which concerns me a lot. when doing a tcpdump icmp I see a lot of the following 15:41:14.738328 IP macpro > bzq-109-66-184-49.red.bezeqint.net: ICMP macpro udp port websm unreachable, length 36 15:41:15.110381 IP macpro > 99-110-211-191.lightspeed.sntcca.sbcglobal.net: ICMP macpro udp port 54045 unreachable, length 36 15:41:23.458831 IP macpro > 188.122.242.115: ICMP macpro udp port websm unreachable, length 36 15:41:23.638731 IP macpro > 61.85-200-21.bkkb.no: ICMP macpro udp port websm unreachable, length 36 15:41:27.329981 IP macpro > c-98-234-88-192.hsd1.ca.comcast.net: ICMP macpro udp port 54045 unreachable, length 36 15:41:29.349586 IP macpro > c-98-234-88-192.hsd1.ca.comcast.net: ICMP macpro udp port 54045 unreachable, length 36 I got suspicious when my router notified me about a lot of ICMP messages that don't get a response [INFO] Mon Jan 10 16:31:47 2011 Blocked outgoing ICMP packet (ICMP type 3) from 192.168.1.189 to 212.25.57.90 Does anyone know how to trace which process (or worse kernel module) might be responsible for this? I rebooted and logged in with a virgin user account and tcpdump showed the same results. Any dtrace magic welcome. Thanks in advance

    Read the article

  • Global Cache CR Requested But Current Block Received

    - by Liu Maclean(???)
    ????????«MINSCN?Cache Fusion Read Consistent» ????,???????????? ??????????????????: SQL> select * from V$version; BANNER -------------------------------------------------------------------------------- Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production PL/SQL Release 11.2.0.3.0 - Production CORE 11.2.0.3.0 Production TNS for Linux: Version 11.2.0.3.0 - Production NLSRTL Version 11.2.0.3.0 - Production SQL> select count(*) from gv$instance; COUNT(*) ---------- 2 SQL> select * from global_name; GLOBAL_NAME -------------------------------------------------------------------------------- www.oracledatabase12g.com ?11gR2 2??RAC??????????status???XG,????Xcurrent block???INSTANCE 2?hold?,?????INSTANCE 1?????????,?????: SQL> select * from test; ID ---------- 1 2 SQL> select dbms_rowid.rowid_block_number(rowid),dbms_rowid.rowid_relative_fno(rowid) from test; DBMS_ROWID.ROWID_BLOCK_NUMBER(ROWID) DBMS_ROWID.ROWID_RELATIVE_FNO(ROWID) ------------------------------------ ------------------------------------ 89233 1 89233 1 SQL> alter system flush buffer_cache; System altered. INSTANCE 1 Session A: SQL> update test set id=id+1 where id=1; 1 row updated. INSTANCE 1 Session B: SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 1 0 3 1755287 SQL> oradebug setmypid; Statement processed. SQL> oradebug dump gc_elements 255; Statement processed. SQL> oradebug tracefile_name; /s01/orabase/diag/rdbms/vprod/VPROD1/trace/VPROD1_ora_19111.trc GLOBAL CACHE ELEMENT DUMP (address: 0xa4ff3080): id1: 0x15c91 id2: 0x1 pkey: OBJ#76896 block: (1/89233) lock: X rls: 0x0 acq: 0x0 latch: 3 flags: 0x20 fair: 0 recovery: 0 fpin: 'kdswh11: kdst_fetch' bscn: 0x0.146e20 bctx: (nil) write: 0 scan: 0x0 lcp: (nil) lnk: [NULL] lch: [0xa9f6a6f8,0xa9f6a6f8] seq: 32 hist: 58 145:0 118 66 144:0 192 352 197 48 121 113 424 180 58 LIST OF BUFFERS LINKED TO THIS GLOBAL CACHE ELEMENT: flg: 0x02000001 lflg: 0x1 state: XCURRENT tsn: 0 tsh: 2 addr: 0xa9f6a5c8 obj: 76896 cls: DATA bscn: 0x0.1ac898 BH (0xa9f6a5c8) file#: 1 rdba: 0x00415c91 (1/89233) class: 1 ba: 0xa9e56000 set: 5 pool: 3 bsz: 8192 bsi: 0 sflg: 3 pwc: 0,15 dbwrid: 0 obj: 76896 objn: 76896 tsn: 0 afn: 1 hint: f hash: [0x91f4e970,0xbae9d5b8] lru: [0x91f58848,0xa9f6a828] lru-flags: debug_dump obj-flags: object_ckpt_list ckptq: [0x9df6d1d8,0xa9f6a740] fileq: [0xa2ece670,0xbdf4ed68] objq: [0xb4964e00,0xb4964e00] objaq: [0xb4964de0,0xb4964de0] st: XCURRENT md: NULL fpin: 'kdswh11: kdst_fetch' tch: 2 le: 0xa4ff3080 flags: buffer_dirty redo_since_read LRBA: [0x19.5671.0] LSCN: [0x0.1ac898] HSCN: [0x0.1ac898] HSUB: [1] buffer tsn: 0 rdba: 0x00415c91 (1/89233) scn: 0x0000.001ac898 seq: 0x01 flg: 0x00 tail: 0xc8980601 frmt: 0x02 chkval: 0x0000 type: 0x06=trans data ??????block: (1/89233)?GLOBAL CACHE ELEMENT DUMP?LOCK????X ??XG , ??????Current Block????Instance??modify???,????????????? ????Instance 2 ????: Instance 2 Session C: SQL> update test set id=id+1 where id=2; 1 row updated. Instance 2 Session D: SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 1 0 3 1756658 SQL> oradebug setmypid; Statement processed. SQL> oradebug dump gc_elements 255; Statement processed. SQL> oradebug tracefile_name; /s01/orabase/diag/rdbms/vprod/VPROD2/trace/VPROD2_ora_13038.trc GLOBAL CACHE ELEMENT DUMP (address: 0x89fb25a0): id1: 0x15c91 id2: 0x1 pkey: OBJ#76896 block: (1/89233) lock: XG rls: 0x0 acq: 0x0 latch: 3 flags: 0x20 fair: 0 recovery: 0 fpin: 'kduwh01: kdusru' bscn: 0x0.1acdf3 bctx: (nil) write: 0 scan: 0x0 lcp: (nil) lnk: [NULL] lch: [0x96f4cf80,0x96f4cf80] seq: 61 hist: 324 21 143:0 19 16 352 329 144:6 14 7 352 197 LIST OF BUFFERS LINKED TO THIS GLOBAL CACHE ELEMENT: flg: 0x0a000001 state: XCURRENT tsn: 0 tsh: 1 addr: 0x96f4ce50 obj: 76896 cls: DATA bscn: 0x0.1acdf6 BH (0x96f4ce50) file#: 1 rdba: 0x00415c91 (1/89233) class: 1 ba: 0x96bd4000 set: 5 pool: 3 bsz: 8192 bsi: 0 sflg: 2 pwc: 0,15 dbwrid: 0 obj: 76896 objn: 76896 tsn: 0 afn: 1 hint: f hash: [0x96ee1fe8,0xbae9d5b8] lru: [0x96f4d0b0,0x96f4cdc0] obj-flags: object_ckpt_list ckptq: [0xbdf519b8,0x96f4d5a8] fileq: [0xbdf519d8,0xbdf519d8] objq: [0xb4a47b90,0xb4a47b90] objaq: [0x96f4d0e8,0xb4a47b70] st: XCURRENT md: NULL fpin: 'kduwh01: kdusru' tch: 1 le: 0x89fb25a0 flags: buffer_dirty redo_since_read remote_transfered LRBA: [0x11.9e18.0] LSCN: [0x0.1acdf6] HSCN: [0x0.1acdf6] HSUB: [1] buffer tsn: 0 rdba: 0x00415c91 (1/89233) scn: 0x0000.001acdf6 seq: 0x01 flg: 0x00 tail: 0xcdf60601 frmt: 0x02 chkval: 0x0000 type: 0x06=trans data GCS CLIENT 0x89fb2618,6 resp[(nil),0x15c91.1] pkey 76896.0 grant 2 cvt 0 mdrole 0x42 st 0x100 lst 0x20 GRANTQ rl G0 master 1 owner 2 sid 0 remote[(nil),0] hist 0x94121c601163423c history 0x3c.0x4.0xd.0xb.0x1.0xc.0x7.0x9.0x14.0x1. cflag 0x0 sender 1 flags 0x0 replay# 0 abast (nil).x0.1 dbmap (nil) disk: 0x0000.00000000 write request: 0x0000.00000000 pi scn: 0x0000.00000000 sq[(nil),(nil)] msgseq 0x1 updseq 0x0 reqids[6,0,0] infop (nil) lockseq x2b8 pkey 76896.0 hv 93 [stat 0x0, 1->1, wm 32768, RMno 0, reminc 18, dom 0] kjga st 0x4, step 0.0.0, cinc 20, rmno 6, flags 0x0 lb 0, hb 0, myb 15250, drmb 15250, apifrz 0 ?Instance 2??????block: (1/89233)? GLOBAL CACHE ELEMENT Lock Convert?lock: XG ????GC_ELEMENTS DUMP???XCUR Cache Fusion?,???????X$ VIEW,??? X$LE X$KJBR X$KJBL, ???X$ VIEW???????????????????: INSTANCE 2 Session D: SELECT * FROM x$le WHERE le_addr IN (SELECT le_addr FROM x$bh WHERE obj IN (SELECT data_object_id FROM dba_objects WHERE owner = 'SYS' AND object_name = 'TEST') AND class = 1 AND state != 3); ADDR INDX INST_ID LE_ADDR LE_ID1 LE_ID2 ---------------- ---------- ---------- ---------------- ---------- ---------- LE_RLS LE_ACQ LE_FLAGS LE_MODE LE_WRITE LE_LOCAL LE_RECOVERY ---------- ---------- ---------- ---------- ---------- ---------- ----------- LE_BLKS LE_TIME LE_KJBL ---------- ---------- ---------------- 00007F94CA14CF60 7003 2 0000000089FB25A0 89233 1 0 0 32 2 0 1 0 1 0 0000000089FB2618 PCM Resource NAME?[ID1][ID2],[BL]???, ID1?ID2 ??blockno? fileno????, ??????????GC_elements dump?? id1: 0x15c91 id2: 0×1 pkey: OBJ#76896 block: (1/89233)?? ,?  kjblname ? kjbrname ??”[0x15c91][0x1],[BL]” ??: INSTANCE 2 Session D: SQL> set linesize 80 pagesize 1400 SQL> SELECT * 2 FROM x$kjbl l 3 WHERE l.kjblname LIKE '%[0x15c91][0x1],[BL]%'; ADDR INDX INST_ID KJBLLOCKP KJBLGRANT KJBLREQUE ---------------- ---------- ---------- ---------------- --------- --------- KJBLROLE KJBLRESP KJBLNAME ---------- ---------------- ------------------------------ KJBLNAME2 KJBLQUEUE ------------------------------ ---------- KJBLLOCKST KJBLWRITING ---------------------------------------------------------------- ----------- KJBLREQWRITE KJBLOWNER KJBLMASTER KJBLBLOCKED KJBLBLOCKER KJBLSID KJBLRDOMID ------------ ---------- ---------- ----------- ----------- ---------- ---------- KJBLPKEY ---------- 00007F94CA22A288 451 2 0000000089FB2618 KJUSEREX KJUSERNL 0 00 [0x15c91][0x1],[BL][ext 0x0,0x 89233,1,BL 0 GRANTED 0 0 1 0 0 0 0 0 76896 SQL> SELECT r.* FROM x$kjbr r WHERE r.kjbrname LIKE '%[0x15c91][0x1],[BL]%'; no rows selected Instance 1 session B: SQL> SELECT r.* FROM x$kjbr r WHERE r.kjbrname LIKE '%[0x15c91][0x1],[BL]%'; ADDR INDX INST_ID KJBRRESP KJBRGRANT KJBRNCVL ---------------- ---------- ---------- ---------------- --------- --------- KJBRROLE KJBRNAME KJBRMASTER KJBRGRANTQ ---------- ------------------------------ ---------- ---------------- KJBRCVTQ KJBRWRITER KJBRSID KJBRRDOMID KJBRPKEY ---------------- ---------------- ---------- ---------- ---------- 00007F801ACA68F8 1355 1 00000000B5A62AE0 KJUSEREX KJUSERNL 0 [0x15c91][0x1],[BL][ext 0x0,0x 0 00000000B48BB330 00 00 0 0 76896 ??????Instance 1???block: (1/89233),??????Instance 2 build cr block ????Instance 1, ?????????? ????? Instance 1? Foreground Process ? Instance 2?LMS??????RAC  TRACE: Instance 2: [oracle@vrh2 ~]$ ps -ef|grep ora_lms|grep -v grep oracle 23364 1 0 Apr29 ? 00:33:15 ora_lms0_VPROD2 SQL> oradebug setospid 23364 Oracle pid: 13, Unix process pid: 23364, image: [email protected] (LMS0) SQL> oradebug event 10046 trace name context forever,level 8:10708 trace name context forever,level 103: trace[rac.*] disk high; Statement processed. SQL> oradebug tracefile_name /s01/orabase/diag/rdbms/vprod/VPROD2/trace/VPROD2_lms0_23364.trc Instance 1 session B : SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 3 1756658 3 1756661 3 1755287 Instance 1 session A : SQL> alter session set events '10046 trace name context forever,level 8:10708 trace name context forever,level 103: trace[rac.*] disk high'; Session altered. SQL> select * from test; ID ---------- 2 2 SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 3 1761520 ?x$BH?????,???????Instance 1???build??CR block,????? TRACE ??: Instance 1 foreground Process: PARSING IN CURSOR #140336527348792 len=18 dep=0 uid=0 oct=3 lid=0 tim=1335939136125254 hv=1689401402 ad='b1a4c828' sqlid='c99yw1xkb4f1u' select * from test END OF STMT PARSE #140336527348792:c=2999,e=2860,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=1,plh=1357081020,tim=1335939136125253 EXEC #140336527348792:c=0,e=40,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,plh=1357081020,tim=1335939136125373 WAIT #140336527348792: nam='SQL*Net message to client' ela= 6 driver id=1650815232 #bytes=1 p3=0 obj#=0 tim=1335939136125420 *** 2012-05-02 02:12:16.125 kclscrs: req=0 block=1/89233 2012-05-02 02:12:16.125574 : kjbcro[0x15c91.1 76896.0][4] *** 2012-05-02 02:12:16.125 kclscrs: req=0 typ=nowait-abort *** 2012-05-02 02:12:16.125 kclscrs: bid=1:3:1:0:f:1e:0:0:10:0:0:0:1:2:4:1:20:0:0:0:c3:49:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:4:3:2:1:2:0:1c:0:4d:26:a3:52:0:0:0:0:c7:c:ca:62:c3:49:0:0:0:0:1:0:14:8e:47:76:1:2:dc:5:a9:fe:17:75:0:0:0:0:0:0:0:0:0:0:0:0:99:ed:0:0:0:0:0:0:10:0:0:0 2012-05-02 02:12:16.125718 : kjbcro[0x15c91.1 76896.0][4] 2012-05-02 02:12:16.125751 : GSIPC:GMBQ: buff 0xba0ee018, queue 0xbb79a7b8, pool 0x60013fa0, freeq 0, nxt 0xbb79a7b8, prv 0xbb79a7b8 2012-05-02 02:12:16.125780 : kjbsentscn[0x0.1ae0f0][to 2] 2012-05-02 02:12:16.125806 : GSIPC:SENDM: send msg 0xba0ee088 dest x20001 seq 177740 type 36 tkts xff0000 mlen x1680198 2012-05-02 02:12:16.125918 : kjbmscr(0x15c91.1)reqid=0x8(req 0xa4ff30f8)(rinst 1)hldr 2(infosz 200)(lseq x2b8) 2012-05-02 02:12:16.126959 : GSIPC:KSXPCB: msg 0xba0ee088 status 30, type 36, dest 2, rcvr 1 *** 2012-05-02 02:12:16.127 kclwcrs: wait=0 tm=1233 *** 2012-05-02 02:12:16.127 kclwcrs: got 1 blocks from ksxprcv WAIT #140336527348792: nam='gc cr block 2-way' ela= 1233 p1=1 p2=89233 p3=1 obj#=76896 tim=1335939136127199 2012-05-02 02:12:16.127272 : kjbcrcomplete[0x15c91.1 76896.0][0] 2012-05-02 02:12:16.127309 : kjbrcvdscn[0x0.1ae0f0][from 2][idx 2012-05-02 02:12:16.127329 : kjbrcvdscn[no bscn <= rscn 0x0.1ae0f0][from 2] ???? kjbcro[0x15c91.1 76896.0][4] kjbsentscn[0x0.1ae0f0][to 2] ?Instance 2??SCN=1ae0f0=1761520? block: (1/89233),???’gc cr block 2-way’ ??,?????????CR block? Instance 2 LMS TRACE 2012-05-02 02:12:15.634057 : GSIPC:RCVD: ksxp msg 0x7f16e1598588 sndr 1 seq 0.177740 type 36 tkts 0 2012-05-02 02:12:15.634094 : GSIPC:RCVD: watq msg 0x7f16e1598588 sndr 1, seq 177740, type 36, tkts 0 2012-05-02 02:12:15.634108 : GSIPC:TKT: collect msg 0x7f16e1598588 from 1 for rcvr -1, tickets 0 2012-05-02 02:12:15.634162 : kjbrcvdscn[0x0.1ae0f0][from 1][idx 2012-05-02 02:12:15.634186 : kjbrcvdscn[no bscn1, wm 32768, RMno 0, reminc 18, dom 0] kjga st 0x4, step 0.0.0, cinc 20, rmno 6, flags 0x0 lb 0, hb 0, myb 15250, drmb 15250, apifrz 0 GCS CLIENT END 2012-05-02 02:12:15.635211 : kjbdowncvt[0x15c91.1 76896.0][1][options x0] 2012-05-02 02:12:15.635230 : GSIPC:AMBUF: rcv buff 0x7f16e1c56420, pool rcvbuf, rqlen 1103 2012-05-02 02:12:15.635308 : GSIPC:GPBMSG: new bmsg 0x7f16e1c56490 mb 0x7f16e1c56420 msg 0x7f16e1c564b0 mlen 152 dest x101 flushsz -1 2012-05-02 02:12:15.635334 : kjbmslset(0x15c91.1)) seq 0x4 reqid=0x6 (shadow 0xb48bb330.xb)(rsn 2)(mas@1) 2012-05-02 02:12:15.635355 : GSIPC:SPBMSG: send bmsg 0x7f16e1c56490 blen 184 msg 0x7f16e1c564b0 mtype 33 attr|dest x30101 bsz|fsz x1ffff 2012-05-02 02:12:15.635377 : GSIPC:SNDQ: enq msg 0x7f16e1c56490, type 65521 seq 118669, inst 1, receiver 1, queued 1 *** 2012-05-02 02:12:15.635 kclccctx: cleanup copy 0x7f16e1d94798 2012-05-02 02:12:15.635479 : [kjmpmsgi:compl][type 36][msg 0x7f16e1598588][seq 177740.0][qtime 0][ptime 1257] 2012-05-02 02:12:15.635511 : GSIPC:BSEND: flushing sndq 0xb491dd28, id 1, dcx 0xbc516778, inst 1, rcvr 1 qlen 0 1 2012-05-02 02:12:15.635536 : GSIPC:BSEND: no batch1 msg 0x7f16e1c56490 type 65521 len 184 dest (1:1) 2012-05-02 02:12:15.635557 : kjbsentscn[0x0.1ae0f1][to 1] 2012-05-02 02:12:15.635578 : GSIPC:SENDM: send msg 0x7f16e1c56490 dest x10001 seq 118669 type 65521 tkts x10002 mlen xb800e8 WAIT #0: nam='gcs remote message' ela= 180 waittime=1 poll=0 event=0 obj#=0 tim=1335939135635819 2012-05-02 02:12:15.635853 : GSIPC:RCVD: ksxp msg 0x7f16e167e0b0 sndr 1 seq 0.177741 type 32 tkts 0 2012-05-02 02:12:15.635875 : GSIPC:RCVD: watq msg 0x7f16e167e0b0 sndr 1, seq 177741, type 32, tkts 0 2012-05-02 02:12:15.636012 : GSIPC:TKT: collect msg 0x7f16e167e0b0 from 1 for rcvr -1, tickets 0 2012-05-02 02:12:15.636040 : kjbrcvdscn[0x0.1ae0f1][from 1][idx 2012-05-02 02:12:15.636060 : kjbrcvdscn[no bscn <= rscn 0x0.1ae0f1][from 1] 2012-05-02 02:12:15.636082 : GSIPC:TKT: dest (1:1) rtkt not acked 1  unassigned bufs 0  tkts 0  newbufs 0 2012-05-02 02:12:15.636102 : GSIPC:TKT: remove ctx dest (1:1) 2012-05-02 02:12:15.636125 : [kjmxmpm][type 32][seq 0.177741][msg 0x7f16e167e0b0][from 1] 2012-05-02 02:12:15.636146 : kjbmpocr(0xb0.6)seq 0x1,reqid=0x23a,(client 0x9fff7b58,0x1)(from 1)(lseq xdf0) 2????LMS????????? ??gcs remote message GSIPC ????SCN=[0x0.1ae0f0] block=1/89233???,??BAST kjbmpbast(0x15c91.1),?? block=1/89233??????? ??fairness??(?11.2.0.3???_fairness_threshold=2),?current block?KCL: F156: fairness downconvert,?Xcurrent DownConvert? Scurrent: Instance 2: SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 2 0 3 1756658 ??Instance 2 LMS ?cr block??? kjbmslset(0x15c91.1)) ????SEND QUEUE GSIPC:SNDQ: enq msg 0x7f16e1c56490? ???????Instance 1???? block: (1/89233)??? ??????: Instance 2: SQL> select CURRENT_RESULTS,LIGHT_WORKS from v$cr_block_server; CURRENT_RESULTS LIGHT_WORKS --------------- ----------- 29273 437 Instance 1 session A: SQL> SQL> select * from test; ID ---------- 2 2 SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 3 1761942 3 1761932 1 0 3 1761520 Instance 2: SQL> select CURRENT_RESULTS,LIGHT_WORKS from v$cr_block_server; CURRENT_RESULTS LIGHT_WORKS --------------- ----------- 29274 437 select * from test END OF STMT PARSE #140336529675592:c=0,e=337,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,plh=1357081020,tim=1335939668940051 EXEC #140336529675592:c=0,e=96,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,plh=1357081020,tim=1335939668940204 WAIT #140336529675592: nam='SQL*Net message to client' ela= 5 driver id=1650815232 #bytes=1 p3=0 obj#=0 tim=1335939668940348 *** 2012-05-02 02:21:08.940 kclscrs: req=0 block=1/89233 2012-05-02 02:21:08.940676 : kjbcro[0x15c91.1 76896.0][5] *** 2012-05-02 02:21:08.940 kclscrs: req=0 typ=nowait-abort *** 2012-05-02 02:21:08.940 kclscrs: bid=1:3:1:0:f:21:0:0:10:0:0:0:1:2:4:1:20:0:0:0:c3:49:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:4:3:2:1:2:0:1f:0:4d:26:a3:52:0:0:0:0:c7:c:ca:62:c3:49:0:0:0:0:1:0:17:8e:47:76:1:2:dc:5:a9:fe:17:75:0:0:0:0:0:0:0:0:0:0:0:0:99:ed:0:0:0:0:0:0:10:0:0:0 2012-05-02 02:21:08.940799 : kjbcro[0x15c91.1 76896.0][5] 2012-05-02 02:21:08.940833 : GSIPC:GMBQ: buff 0xba0ee018, queue 0xbb79a7b8, pool 0x60013fa0, freeq 0, nxt 0xbb79a7b8, prv 0xbb79a7b8 2012-05-02 02:21:08.940859 : kjbsentscn[0x0.1ae28c][to 2] 2012-05-02 02:21:08.940870 : GSIPC:SENDM: send msg 0xba0ee088 dest x20001 seq 177810 type 36 tkts xff0000 mlen x1680198 2012-05-02 02:21:08.940976 : kjbmscr(0x15c91.1)reqid=0xa(req 0xa4ff30f8)(rinst 1)hldr 2(infosz 200)(lseq x2b8) 2012-05-02 02:21:08.941314 : GSIPC:KSXPCB: msg 0xba0ee088 status 30, type 36, dest 2, rcvr 1 *** 2012-05-02 02:21:08.941 kclwcrs: wait=0 tm=707 *** 2012-05-02 02:21:08.941 kclwcrs: got 1 blocks from ksxprcv 2012-05-02 02:21:08.941818 : kjbassume[0x15c91.1][sender 2][mymode x1][myrole x0][srole x0][flgs x0][spiscn 0x0.0][swscn 0x0.0] 2012-05-02 02:21:08.941852 : kjbrcvdscn[0x0.1ae28d][from 2][idx 2012-05-02 02:21:08.941871 : kjbrcvdscn[no bscn ??????????????SCN=[0x0.1ae28c]=1761932 Version?CR block, ????receive????Xcurrent Block??SCN=1ae28d=1761933,Instance 1???Xcurrent Block???build????????SCN=1761932?CR BLOCK, ????????Current block,?????????'gc current block 2-way'? ?????????????request current block,?????kjbcro;?????Instance 2?LMS???????Current Block: Instance 2 LMS trace: 2012-05-02 02:21:08.448743 : GSIPC:RCVD: ksxp msg 0x7f16e14a4398 sndr 1 seq 0.177810 type 36 tkts 0 2012-05-02 02:21:08.448778 : GSIPC:RCVD: watq msg 0x7f16e14a4398 sndr 1, seq 177810, type 36, tkts 0 2012-05-02 02:21:08.448798 : GSIPC:TKT: collect msg 0x7f16e14a4398 from 1 for rcvr -1, tickets 0 2012-05-02 02:21:08.448816 : kjbrcvdscn[0x0.1ae28c][from 1][idx 2012-05-02 02:21:08.448834 : kjbrcvdscn[no bscn <= rscn 0x0.1ae28c][from 1] 2012-05-02 02:21:08.448857 : GSIPC:TKT: dest (1:1) rtkt not acked 2  unassigned bufs 0  tkts 0  newbufs 0 2012-05-02 02:21:08.448875 : GSIPC:TKT: remove ctx dest (1:1) 2012-05-02 02:21:08.448970 : [kjmxmpm][type 36][seq 0.177810][msg 0x7f16e14a4398][from 1] 2012-05-02 02:21:08.448993 : kjbmpbast(0x15c91.1) reqid=0x6 (req 0xa4ff30f8)(reqinst 1)(reqid 10)(flags x0) *** 2012-05-02 02:21:08.449 kclcrrf: req=48054 block=1/89233 *** 2012-05-02 02:21:08.449 kcl_compress_block: compressed: 6 free space: 7680 2012-05-02 02:21:08.449085 : kjbsentscn[0x0.1ae28d][to 1] 2012-05-02 02:21:08.449142 : kjbdeliver[to 1][0xa4ff30f8][10][current 1] 2012-05-02 02:21:08.449164 : kjbmssch(reqlock 0xa4ff30f8,10)(to 1)(bsz 344) 2012-05-02 02:21:08.449183 : GSIPC:AMBUF: rcv buff 0x7f16e18bcec8, pool rcvbuf, rqlen 1102 *** 2012-05-02 02:21:08.449 kclccctx: cleanup copy 0x7f16e1d94838 *** 2012-05-02 02:21:08.449 kcltouched: touch seconds 3271 *** 2012-05-02 02:21:08.449 kclgrantlk: req=48054 2012-05-02 02:21:08.449347 : [kjmpmsgi:compl][type 36][msg 0x7f16e14a4398][seq 177810.0][qtime 0][ptime 1119] WAIT #0: nam='gcs remote message' ela= 568 waittime=1 poll=0 event=0 obj#=0 tim=1335939668449962 2012-05-02 02:21:08.450001 : GSIPC:RCVD: ksxp msg 0x7f16e1bb22a0 sndr 1 seq 0.177811 type 32 tkts 0 2012-05-02 02:21:08.450024 : GSIPC:RCVD: watq msg 0x7f16e1bb22a0 sndr 1, seq 177811, type 32, tkts 0 2012-05-02 02:21:08.450043 : GSIPC:TKT: collect msg 0x7f16e1bb22a0 from 1 for rcvr -1, tickets 0 2012-05-02 02:21:08.450060 : kjbrcvdscn[0x0.1ae28e][from 1][idx 2012-05-02 02:21:08.450078 : kjbrcvdscn[no bscn <= rscn 0x0.1ae28e][from 1] 2012-05-02 02:21:08.450097 : GSIPC:TKT: dest (1:1) rtkt not acked 3  unassigned bufs 0  tkts 0  newbufs 0 2012-05-02 02:21:08.450116 : GSIPC:TKT: remove ctx dest (1:1) 2012-05-02 02:21:08.450136 : [kjmxmpm][type 32][seq 0.177811][msg 0x7f16e1bb22a0][from 1] 2012-05-02 02:21:08.450155 : kjbmpocr(0xb0.6)seq 0x1,reqid=0x23e,(client 0x9fff7b58,0x1)(from 1)(lseq xdf4) ???Instance 2??LMS???,???build cr block,??????Instance 1?????Current Block??????Instance 2??v$cr_block_server??????LIGHT_WORKS?????current block transfer??????,??????? CR server? Light Work Rule(Light Work Rule?8i Cr Server?????????,?Remote LMS?? build CR????????,resource holder?LMS???????block,????CR build If creating the consistent read version block involves too much work (such as reading blocks from disk), then the holder sends the block to the requestor, and the requestor completes the CR fabrication. The holder maintains a fairness counter of CR requests. After the fairness threshold is reached, the holder downgrades it to lock mode.)? ??????? CR Request ????Current Block?? ???:??????class?block,CR server??????? ??undo block?? undo header block?CR quest, LMS????Current Block, ????? ???? ??????? block cleanout? CR  Version??????? ???????? data blocks, ??????? CR quest  & CR received?(???????Light Work Rule,LMS"??"), ??Current Block??DownConvert???S lock,??LMS???????ship??current version?block? ??????? , ?????? ,???????DownConvert?????”_fairness_threshold“???200,????Xcurrent Block?????Scurrent, ????LMS?????Current Version?Data Block: SQL> show parameter fair NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ _fairness_threshold integer 200 Instance 1: SQL> update test set id=id+1 where id=4; 1 row updated. Instance 2: SQL> update test set id=id+1 where id=2; 1 row updated. SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 1 0 3 1838166 ?Instance 1? ????,? ??instance 2? v$cr_block_server?? instance 1 SQL> select * from test; ID ---------- 10 3 instance 2: SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 1 0 3 1883707 8 0 SQL> select * from test; ID ---------- 10 3 SQL> select state,cr_scn_bas from x$bh where file#=1 and dbablk=89233 and state!=0; STATE CR_SCN_BAS ---------- ---------- 1 0 3 1883707 8 0 ................... SQL> / STATE CR_SCN_BAS ---------- ---------- 2 0 3 1883707 3 1883695 repeat cr request on Instance 1 SQL> / STATE CR_SCN_BAS ---------- ---------- 8 0 3 1883707 3 1883695 ??????_fairness_threshold????????,?????200 ????????CR serve??Downgrade?lock, ????data block? CR Request????Receive? Current Block?

    Read the article

  • Windows XP - Security Update for Windows XP (KB923561) (KB946648) (KB956572) (KB958644)

    - by leeand00
    My father's computer has Windows XP, but when I try to install the service packs it always fails. What gives? Here are the errors that I get in the event log: Date: 2/6/2010 Time: 12:02:18 AM Type: Error User: N/A Computer: EVO Source: Windows Update Agent Category: Installation Event ID: 20 Installation Failure: Windows failed to install the following update with error 0x80070002: Security Update for Windows XP (KB946648). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. 0000: 57 69 6e 33 32 48 52 65 Win32HRe 0008: 73 75 6c 74 3d 30 78 38 sult=0x8 0010: 30 30 37 30 30 30 32 20 0070002 0018: 55 70 64 61 74 65 49 44 UpdateID 0020: 3d 7b 38 33 44 31 41 44 ={83D1AD 0028: 46 35 2d 37 37 39 44 2d F5-779D- 0030: 34 30 31 36 2d 38 43 33 4016-8C3 0038: 31 2d 35 34 39 32 37 30 1-549270 0040: 46 36 37 42 33 46 7d 20 F67B3F} 0048: 52 65 76 69 73 69 6f 6e Revision 0050: 4e 75 6d 62 65 72 3d 31 Number=1 0058: 30 34 20 00 04 . Date: 2/6/2010 Time: 12:02:18 AM Type: Error User: N/A Computer: EVO Source: Windows Update Agent Catagory: Installation Event ID: 20 Installation Failure: Windows failed to install the following update with error 0x80070002: Security Update for Windows XP (KB956572). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. 0000: 57 69 6e 33 32 48 52 65 Win32HRe 0008: 73 75 6c 74 3d 30 78 38 sult=0x8 0010: 30 30 37 30 30 30 32 20 0070002 0018: 55 70 64 61 74 65 49 44 UpdateID 0020: 3d 7b 44 46 32 46 30 41 ={DF2F0A 0028: 39 38 2d 36 45 33 35 2d 98-6E35- 0030: 34 33 37 39 2d 41 42 33 4379-AB3 0038: 33 2d 41 30 33 30 33 45 3-A0303E 0040: 46 37 34 42 32 41 7d 20 F74B2A} 0048: 52 65 76 69 73 69 6f 6e Revision 0050: 4e 75 6d 62 65 72 3d 31 Number=1 0058: 30 32 20 00 02 . Date: 2/6/2010 Time: 12:02:18 AM Type: Error User: N/A Computer EVO Source: Windows Update Agent Event ID: 20 Installation Failure: Windows failed to install the following update with error 0x80070002: Security Update for Windows XP (KB958644). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. 0000: 57 69 6e 33 32 48 52 65 Win32HRe 0008: 73 75 6c 74 3d 30 78 38 sult=0x8 0010: 30 30 37 30 30 30 32 20 0070002 0018: 55 70 64 61 74 65 49 44 UpdateID 0020: 3d 7b 39 33 39 37 41 32 ={9397A2 0028: 31 46 2d 32 34 36 43 2d 1F-246C- 0030: 34 35 33 42 2d 41 43 30 453B-AC0 0038: 35 2d 36 35 42 46 34 46 5-65BF4F 0040: 43 36 42 36 38 42 7d 20 C6B68B} 0048: 52 65 76 69 73 69 6f 6e Revision 0050: 4e 75 6d 62 65 72 3d 31 Number=1 0058: 30 31 20 00 01 . Date: 2/6/2010 Time: 12:02:18 AM Type: Error User: N/A Computer: EVO Source: Windows Update Agent Category: Installation Event ID: 20 Installation Failure: Windows failed to install the following update with error 0x80070002: Security Update for Windows XP (KB923561). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. 0000: 57 69 6e 33 32 48 52 65 Win32HRe 0008: 73 75 6c 74 3d 30 78 38 sult=0x8 0010: 30 30 37 30 30 30 32 20 0070002 0018: 55 70 64 61 74 65 49 44 UpdateID 0020: 3d 7b 33 31 30 41 34 43 ={310A4C 0028: 30 38 2d 35 39 33 44 2d 08-593D- 0030: 34 31 41 33 2d 42 42 35 41A3-BB5 0038: 37 2d 38 33 42 33 38 36 7-83B386 0040: 44 37 37 33 42 35 7d 20 D773B5} 0048: 52 65 76 69 73 69 6f 6e Revision 0050: 4e 75 6d 62 65 72 3d 31 Number=1 0058: 30 33 20 00 03 . Thank you, Andrew

    Read the article

  • How to disable proxy requests once a server has been added to spammers "open proxy" list?

    - by Matt
    Hello all, I've just started in a new company, and have been going over the setup of their Apache webserver conf files... only to find that they've had their apache servers set up as open proxies available to all the world for the last two months. I've already set ProxyRequests Off in the httpd.conf file and restarted the web server, but the access log file is still growing at a horrendous rate (about a gig a day). I noticed that another question was posted on here about this (http://serverfault.com/questions/63715/apache-hit-with-proxy-request), but their access log was supposedly returning 404 errors, while mine appears to be returning 403 and 404 codes... Is this correct? Here are a few lines out of my access log: 87.118.118.124 - - [16/Mar/2010:10:56:36 -0400] "GET http://www.c5interlude.ru/torrent/viewtopic.php?p=2501 HTTP/1.0" 404 219 "http://www.c5interlude.ru/torrent/viewtopic.php?p=2501" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; .NET CLR 1.1.4322)" 117.41.184.27 - - [16/Mar/2010:10:56:36 -0400] "GET http://ad.xtendmedia.com/st?ad_type=iframe&ad_size=300x250&section=790074 HTTP/1.0" 404 200 "http://www.newbiegamer.com" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; Alexa Toolbar)" 122.224.55.222 - - [16/Mar/2010:10:56:36 -0400] "GET http://www.188woool.net/\xb4\xf3\xd4\xcb\xb4\xab\xca\xc0.rar HTTP/1.1" 403 214 "http://www.188woool.net/\xb4\xf3\xd4\xcb\xb4\xab\xca\xc0.rar" "Mozilla/4.0" 58.55.21.40 - - [16/Mar/2010:10:56:36 -0400] "GET http://www.cpx24.com/ad1.js HTTP/1.0" 404 204 "http://thebighits.com/?id=aibux" "Mozilla/4.0 (compatible; MSIE 5.01; Windows NT 5.0)" 122.226.223.188 - - [16/Mar/2010:10:56:36 -0400] "GET http://ad.reduxmedia.com/st?ad_type=iframe&ad_size=160x600&section=798636 HTTP/1.0" 404 200 "http://www.gvvu.com" "Mozilla/4.0 (compatible; MSIE 5.5; AOL 6.0; Windows 98; Win 9x 4.90)" 84.51.109.31 - - [16/Mar/2010:10:56:36 -0400] "GET http://www.kslp.ru/forum/index.php HTTP/1.0" 404 213 "http://www.kslp.ru/forum/index.php" "Mozilla/4.0 (compatible; MSIE 7.0b; Windows NT 6.0 ; .NET CLR 2.0.50215; SL Commerce Client v1.0; Tablet PC 2.0" 122.224.48.49 - - [16/Mar/2010:10:56:36 -0400] "GET http://www1.vip218.com/\xb2\xca\xba\xe7\xb4\xab\xca\xc0.exe HTTP/1.1" 403 214 "http://www1.vip218.com/\xb2\xca\xba\xe7\xb4\xab\xca\xc0.exe" "Mozilla/4.0" 117.41.184.27 - - [16/Mar/2010:10:56:36 -0400] "GET http://ad.xtendmedia.com/st?ad_type=iframe&ad_size=728x90&section=657624 HTTP/1.0" 404 200 "http://www.raiseanimals.com" "Mozilla/4.0 (compatible; MSIE 6.0; Windows 98; Alexa Toolbar)" And my corresponding error log entries: [Tue Mar 16 10:56:36 2010] [error] [client 87.118.118.124] File does not exist: C:/public_html/torrent, referer: http://www.c5interlude.ru/torrent/viewtopic.php?p=2501 [Tue Mar 16 10:56:36 2010] [error] [client 117.41.184.27] File does not exist: C:/public_html/st, referer: http://www.newbiegamer.com [Tue Mar 16 10:56:36 2010] [error] [client 122.224.55.222] (22)Invalid argument: Cannot map GET http://www.188woool.net/\xb4\xf3\xd4\xcb\xb4\xab\xca\xc0.rar HTTP/1.1 to file, referer: http://www.188woool.net/\xb4\xf3\xd4\xcb\xb4\xab\xca\xc0.rar [Tue Mar 16 10:56:36 2010] [error] [client 58.55.21.40] File does not exist: C:/public_html/ad1.js, referer: http://thebighits.com/?id=aibux [Tue Mar 16 10:56:36 2010] [error] [client 122.226.223.188] File does not exist: C:/public_html/st, referer: http://www.gvvu.com [Tue Mar 16 10:56:36 2010] [error] [client 84.51.109.31] File does not exist: C:/public_html/forum, referer: http://www.kslp.ru/forum/index.php [Tue Mar 16 10:56:36 2010] [error] [client 122.224.48.49] (22)Invalid argument: Cannot map GET http://www1.vip218.com/\xb2\xca\xba\xe7\xb4\xab\xca\xc0.exe HTTP/1.1 to file, referer: http://www1.vip218.com/\xb2\xca\xba\xe7\xb4\xab\xca\xc0.exe [Tue Mar 16 10:56:36 2010] [error] [client 117.41.184.27] File does not exist: C:/public_html/st, referer: http://www.raiseanimals.com Does this in fact look like the server is blocking them correctly, and is there anything else that I could do better to cut down on my access log size? (perhaps block these requests from the server completely?) Thanks! Matt

    Read the article

  • Discrete mathematics problem - Probability theory and counting

    - by Mohammad
    Hello All, I'm taking a discrete mathematics course, and I encountered a question and I need your help. I don't know if this is the right place for that though :) It says: Each user on a computer system has a password, which is six to eight characters long, where each character is an uppercase letter or a digit. Each password must contain at least one digit. How many possible passwords are there? The book solves this by adding the probabilities of having six,seven and eight characters long password. However, when he solves for probability of six characters he does this P6 = 36^6 - 26^6 and does P7 = 36^7 - 26^7 and P8 = 36^8 - 26^8 and then add them all I understand the solution, but my question is why doesn't calculating, P6 = 10*36^5 and the same for P7 and P8, work? 10 for the digit and 36 for the alphanumeric? Also, if anyone could give me another solution, other than the one in the book. Thank you very much :)

    Read the article

  • Apache server still running but user can not connect website, after "sudo apachectl restart" user can connect website, what'r wrong? [on hold]

    - by Tinyfool
    My website is http://ourcoders.com/, recently I found sometime user report can not connect to my website, but I ssh to server, I found Apache still running, like this: root@AY1401261057077842eaZ:~# ps aux|grep apache root 873 0.0 1.3 290496 13528 ? Ss Aug18 0:28 /usr/sbin/apache2 -k start www-data 3490 0.0 1.8 299004 18764 ? S Aug21 0:01 /usr/sbin/apache2 -k start www-data 3612 0.0 1.5 296008 15540 ? S Aug21 0:03 /usr/sbin/apache2 -k start www-data 3860 0.0 1.5 296636 16268 ? S Aug21 0:00 /usr/sbin/apache2 -k start www-data 3913 0.0 1.2 295468 13084 ? S Aug21 0:00 /usr/sbin/apache2 -k start www-data 3931 0.0 1.7 298488 18228 ? S 16:02 0:01 /usr/sbin/apache2 -k start www-data 3938 0.0 1.9 299128 19724 ? S 16:02 0:02 /usr/sbin/apache2 -k start www-data 4465 0.0 1.6 296688 16404 ? S Aug21 0:00 /usr/sbin/apache2 -k start www-data 5075 0.0 1.2 295468 13044 ? S 16:16 0:00 /usr/sbin/apache2 -k start www-data 5153 0.0 1.5 295880 15612 ? S 16:17 0:00 /usr/sbin/apache2 -k start www-data 5770 0.0 1.5 296608 16016 ? S 16:30 0:00 /usr/sbin/apache2 -k start www-data 5773 0.0 1.6 296948 16640 ? S 16:30 0:00 /usr/sbin/apache2 -k start www-data 5816 0.0 1.6 297216 16976 ? S 16:31 0:01 /usr/sbin/apache2 -k start www-data 5918 0.0 1.7 298228 17820 ? S 16:33 0:01 /usr/sbin/apache2 -k start www-data 6023 0.0 1.9 299864 19840 ? S 16:35 0:13 /usr/sbin/apache2 -k start www-data 6073 0.0 1.7 298480 18120 ? S 16:36 0:02 /usr/sbin/apache2 -k start www-data 6088 0.0 2.0 300488 21008 ? S 16:36 0:12 /usr/sbin/apache2 -k start www-data 6114 0.0 1.7 298548 18268 ? S 16:37 0:12 /usr/sbin/apache2 -k start www-data 6134 0.0 1.6 296688 16532 ? S 16:37 0:04 /usr/sbin/apache2 -k start www-data 6193 0.0 1.7 297908 17420 ? S 16:38 0:08 /usr/sbin/apache2 -k start www-data 6821 0.0 1.8 299556 19072 ? S 16:43 0:11 /usr/sbin/apache2 -k start www-data 7058 0.0 1.7 298676 18204 ? S 16:48 0:10 /usr/sbin/apache2 -k start www-data 7065 0.0 1.8 299028 18868 ? S 16:48 0:11 /usr/sbin/apache2 -k start www-data 7084 0.0 1.8 299508 19020 ? S 16:48 0:11 /usr/sbin/apache2 -k start www-data 7221 0.0 1.8 299160 18768 ? S 16:51 0:09 /usr/sbin/apache2 -k start www-data 11453 0.0 1.7 298484 18256 ? S 09:39 0:02 /usr/sbin/apache2 -k start root 26324 0.0 0.0 8084 920 pts/0 S+ 22:52 0:00 grep --color=auto apache root 28517 0.0 0.0 4404 612 ? S Aug21 0:00 /bin/sh -c /usr/sbin/cronolog /var/log/apache2/cocoa/%Y/%m/access-%Y-%m-%d.log root 28518 0.0 0.0 4404 616 ? S Aug21 0:00 /bin/sh -c /usr/sbin/cronolog /var/log/apache2/cocoa/%Y/%m/access-%Y-%m-%d.log root 28519 0.0 0.0 4404 612 ? S Aug21 0:00 /bin/sh -c /usr/sbin/cronolog /var/log/apache2/cocoa/%Y/%m/access-%Y-%m-%d.log root 28520 0.0 0.0 4404 616 ? S Aug21 0:00 /bin/sh -c /usr/sbin/cronolog /var/log/apache2/cocoa/%Y/%m/access-%Y-%m-%d.log root 28521 0.0 0.0 4312 552 ? S Aug21 0:00 /usr/sbin/cronolog /var/log/apache2/cocoa/%Y/%m/access-%Y-%m-%d.log root 28522 0.0 0.0 4308 548 ? S Aug21 0:07 /usr/sbin/cronolog /var/log/apache2/cocoa/%Y/%m/access-%Y-%m-%d.log root 28523 0.0 0.0 4176 352 ? S Aug21 0:00 /usr/sbin/cronolog /var/log/apache2/cocoa/%Y/%m/access-%Y-%m-%d.log root 28524 0.0 0.0 4180 356 ? S Aug21 0:00 /usr/sbin/cronolog /var/log/apache2/cocoa/%Y/%m/access-%Y-%m-%d.log Today's only error log is blow. [Sat Aug 23 22:52:47 2014] [notice] SIGHUP received. Attempting to restart [Sat Aug 23 22:52:47 2014] [notice] Apache/2.2.22 (Ubuntu) PHP/5.3.10-1ubuntu3.13 with Suhosin-Patch configured -- resuming normal operations traffic information: cat access-2014-08-23.log | cut -d " " -f4 |cut -d":" -f2 |sort|uniq -c |sort -nr 5692 14 5291 15 5083 16 4723 23 4463 12 4057 17 4011 11 3926 13 3852 10 3187 05 3176 09 3055 06 2790 07 2672 00 2608 02 2591 01 2577 04 2514 03 2497 08 707 22 88 18 After I use "sudo apachectl restart", user can connect my website. So I want to know? What is the problem? And if "sudo apachectl restart" is needed, can I automate run this command? Today this kind struts appear again, and I run netstat -a -n Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN tcp 0 0 115.28.146.116:80 125.39.208.120:50708 SYN_RECV tcp 0 0 115.28.146.116:80 125.39.208.158:50278 SYN_RECV tcp 0 0 115.28.146.116:80 220.173.142.152:23320 SYN_RECV tcp 0 0 115.28.146.116:80 60.173.247.132:52851 SYN_RECV tcp 0 0 115.28.146.116:80 125.39.208.158:39397 SYN_RECV tcp 0 0 115.28.146.116:80 125.39.208.158:56894 SYN_RECV tcp 0 0 115.28.146.116:80 183.129.174.2:21291 SYN_RECV tcp 0 0 115.28.146.116:80 125.39.208.120:44499 SYN_RECV tcp 0 0 115.28.146.116:80 125.39.208.120:34017 SYN_RECV tcp 0 0 115.28.146.116:80 124.65.50.210:3774 SYN_RECV tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:15770 0.0.0.0:* LISTEN tcp 1 0 115.28.146.116:80 14.127.65.219:61633 CLOSE_WAIT tcp 305 0 115.28.146.116:80 125.39.208.120:37593 ESTABLISHED tcp 0 0 10.144.142.201:52866 10.146.6.61:3306 TIME_WAIT tcp 0 0 10.144.142.201:52873 10.146.6.61:3306 TIME_WAIT tcp 0 0 10.144.142.201:52868 10.146.6.61:3306 TIME_WAIT tcp 343 0 115.28.146.116:80 182.118.20.215:50709 ESTABLISHED tcp 0 0 115.28.146.116:54784 173.194.127.243:80 ESTABLISHED tcp 1 0 115.28.146.116:80 116.192.2.185:41253 CLOSE_WAIT tcp 0 0 10.144.142.201:52876 10.146.6.61:3306 ESTABLISHED tcp 559 0 115.28.146.116:80 218.241.144.114:54501 ESTABLISHED tcp 376 0 115.28.146.116:80 116.213.196.119:50604 CLOSE_WAIT tcp 1 0 115.28.146.116:80 113.36.238.28:59339 CLOSE_WAIT tcp 214 0 115.28.146.116:80 142.4.215.40:34443 ESTABLISHED tcp 0 0 115.28.146.116:48635 115.28.146.116:80 ESTABLISHED tcp 187 0 115.28.146.116:80 115.28.146.116:48635 ESTABLISHED tcp 0 0 10.144.142.201:52853 10.146.6.61:3306 TIME_WAIT tcp 594 0 115.28.146.116:80 183.129.174.2:7090 CLOSE_WAIT tcp 0 0 10.144.142.201:52874 10.146.6.61:3306 TIME_WAIT tcp 0 0 115.28.146.116:80 182.118.20.166:44081 TIME_WAIT tcp 1 0 115.28.146.116:80 113.36.238.28:59028 CLOSE_WAIT tcp 1 0 115.28.146.116:80 14.127.65.219:61665 CLOSE_WAIT tcp 0 0 10.144.142.201:52860 10.146.6.61:3306 TIME_WAIT tcp 0 0 10.144.142.201:46983 10.146.6.61:3306 ESTABLISHED tcp 0 2290 115.28.146.116:80 14.154.179.243:41049 FIN_WAIT1 tcp 0 0 10.144.142.201:42900 10.146.6.61:3306 ESTABLISHED tcp 571 0 115.28.146.116:80 220.173.142.152:23295 CLOSE_WAIT tcp 1 0 115.28.146.116:80 113.36.238.28:59337 CLOSE_WAIT tcp 438 0 115.28.146.116:80 42.120.74.202:31567 CLOSE_WAIT tcp 0 0 115.28.146.116:80 113.36.238.28:59498 ESTABLISHED tcp 259 0 115.28.146.116:80 66.249.65.56:36739 ESTABLISHED tcp 0 0 115.28.146.116:80 113.36.238.28:59341 ESTABLISHED tcp 0 0 115.28.146.116:80 142.4.215.40:34267 FIN_WAIT2 tcp 799 0 115.28.146.116:80 180.173.88.1:52779 ESTABLISHED tcp 0 0 115.28.146.116:80 117.136.25.132:25207 FIN_WAIT2 tcp 0 0 115.28.146.116:80 220.181.108.186:42540 TIME_WAIT tcp 0 0 10.144.142.201:59902 10.242.174.13:80 TIME_WAIT tcp 0 1820 115.28.146.116:80 218.22.140.90:39266 LAST_ACK tcp 0 0 115.28.146.116:80 66.249.65.64:56977 TIME_WAIT tcp 669 0 115.28.146.116:80 83.251.90.61:49664 ESTABLISHED tcp 0 0 10.144.142.201:52872 10.146.6.61:3306 TIME_WAIT tcp 233 0 115.28.146.116:80 54.202.88.0:43398 CLOSE_WAIT tcp 479 0 115.28.146.116:80 65.49.44.149:25739 ESTABLISHED tcp 378 0 115.28.146.116:80 148.251.124.173:39313 CLOSE_WAIT tcp 1 0 115.28.146.116:80 14.127.65.219:61697 CLOSE_WAIT tcp 1 0 115.28.146.116:80 49.4.158.2:52986 CLOSE_WAIT tcp 769 0 115.28.146.116:80 14.127.65.219:61537 ESTABLISHED tcp 0 0 10.144.142.201:52859 10.146.6.61:3306 TIME_WAIT tcp 0 0 10.144.142.201:55734 10.164.2.163:9200 TIME_WAIT tcp 563 0 115.28.146.116:80 202.55.20.10:22577 CLOSE_WAIT tcp 194 0 115.28.146.116:80 37.58.100.165:50908 CLOSE_WAIT tcp 791 0 115.28.146.116:80 116.192.2.185:45628 ESTABLISHED tcp 709 0 115.28.146.116:80 113.116.61.178:65209 ESTABLISHED tcp 706 0 115.28.146.116:80 183.227.44.237:54519 ESTABLISHED tcp 301 0 115.28.146.116:80 118.198.243.127:31180 ESTABLISHED tcp 0 0 10.144.142.201:55721 10.164.2.163:9200 TIME_WAIT tcp 0 0 10.144.142.201:55726 10.164.2.163:9200 TIME_WAIT tcp 0 0 10.144.142.201:55723 10.164.2.163:9200 TIME_WAIT tcp 681 0 115.28.146.116:80 83.251.90.61:49662 ESTABLISHED tcp 0 0 115.28.146.116:80 83.251.90.61:65274 TIME_WAIT tcp 1 0 115.28.146.116:80 113.36.238.28:59022 CLOSE_WAIT tcp 1 0 115.28.146.116:80 180.173.88.1:52781 CLOSE_WAIT tcp 1 0 115.28.146.116:80 113.36.238.28:59037 CLOSE_WAIT tcp 0 0 10.144.142.201:55728 10.164.2.163:9200 TIME_WAIT tcp 231 0 115.28.146.116:37596 110.75.102.62:80 CLOSE_WAIT tcp 1 0 115.28.146.116:80 14.127.65.219:61569 CLOSE_WAIT tcp 0 0 10.144.142.201:51310 10.146.6.61:3306 ESTABLISHED tcp 299 0 115.28.146.116:80 123.125.71.16:36281 ESTABLISHED tcp 0 0 115.28.146.116:48620 115.28.146.116:80 ESTABLISHED tcp 1 0 115.28.146.116:80 183.227.44.237:54520 CLOSE_WAIT tcp 1 0 115.28.146.116:80 113.36.238.28:59026 CLOSE_WAIT tcp 479 0 115.28.146.116:80 65.49.44.149:5490 ESTABLISHED tcp 665 0 115.28.146.116:80 83.251.90.61:49663 ESTABLISHED tcp 0 0 115.28.146.116:53744 173.194.127.147:80 ESTABLISHED tcp 1 0 115.28.146.116:80 113.36.238.28:59023 CLOSE_WAIT tcp 0 0 115.28.146.116:22 116.192.2.185:34205 ESTABLISHED tcp 333 0 115.28.146.116:80 149.174.113.111:54338 CLOSE_WAIT tcp 0 0 10.144.142.201:52861 10.146.6.61:3306 TIME_WAIT tcp 0 0 10.144.142.201:52863 10.146.6.61:3306 TIME_WAIT tcp 1 0 115.28.146.116:80 116.192.2.185:43272 CLOSE_WAIT tcp 767 0 115.28.146.116:80 49.4.158.2:52947 CLOSE_WAIT tcp 668 0 115.28.146.116:80 83.251.90.61:49665 ESTABLISHED tcp 642 0 115.28.146.116:80 222.78.185.50:55788 ESTABLISHED tcp 710 0 115.28.146.116:80 113.116.61.178:65264 ESTABLISHED tcp 284 0 115.28.146.116:80 157.55.39.243:65185 ESTABLISHED tcp 450 0 115.28.146.116:80 65.49.44.149:55496 ESTABLISHED tcp 1 0 115.28.146.116:80 116.192.2.185:36629 CLOSE_WAIT tcp 233 0 115.28.146.116:80 54.202.88.0:42424 CLOSE_WAIT tcp 187 0 115.28.146.116:80 115.28.146.116:48620 ESTABLISHED tcp 1 0 115.28.146.116:80 14.127.65.219:61601 CLOSE_WAIT tcp 776 0 115.28.146.116:80 202.118.253.102:64883 CLOSE_WAIT tcp 841 0 115.28.146.116:80 37.228.105.28:49472 ESTABLISHED tcp 787 0 115.28.146.116:80 112.65.226.198:52192 ESTABLISHED tcp 0 0 10.144.142.201:55717 10.164.2.163:9200 TIME_WAIT tcp 233 0 115.28.146.116:80 54.202.88.0:42855 CLOSE_WAIT tcp 379 0 115.28.146.116:80 101.226.166.219:2322 ESTABLISHED tcp 0 0 115.28.146.116:80 183.60.212.152:43063 CLOSE_WAIT tcp 1 0 115.28.146.116:80 180.173.88.1:52780 CLOSE_WAIT tcp 784 0 115.28.146.116:80 101.95.29.26:63094 ESTABLISHED tcp 463 0 115.28.146.116:80 65.49.44.149:53876 ESTABLISHED tcp 1 0 115.28.146.116:80 116.192.2.185:37946 CLOSE_WAIT tcp 479 0 115.28.146.116:80 65.49.44.149:41157 ESTABLISHED tcp 1 0 115.28.146.116:80 113.36.238.28:59036 CLOSE_WAIT tcp 1 0 115.28.146.116:80 49.4.158.2:52984 CLOSE_WAIT tcp 1 0 115.28.146.116:80 116.192.2.185:38100 CLOSE_WAIT tcp 0 0 10.144.142.201:52865 10.146.6.61:3306 TIME_WAIT tcp 1 0 115.28.146.116:80 113.36.238.28:59027 CLOSE_WAIT tcp 0 0 115.28.146.116:36508 173.194.127.81:80 ESTABLISHED tcp 210 0 115.28.146.116:80 188.143.232.123:47775 ESTABLISHED tcp 1 0 115.28.146.116:80 113.36.238.28:59025 CLOSE_WAIT tcp 0 0 10.144.142.201:52857 10.146.6.61:3306 TIME_WAIT tcp 654 0 115.28.146.116:80 49.4.158.2:52985 ESTABLISHED tcp 0 0 115.28.146.116:58627 110.75.102.62:80 ESTABLISHED tcp 782 0 115.28.146.116:80 180.153.219.13:40293 ESTABLISHED tcp 792 0 115.28.146.116:80 116.192.2.185:48187 CLOSE_WAIT tcp6 0 0 :::22 :::* LISTEN udp 0 0 115.28.146.116:123 0.0.0.0:* udp 0 0 10.144.142.201:123 0.0.0.0:* udp 0 0 127.0.0.1:123 0.0.0.0:* udp 0 0 0.0.0.0:123 0.0.0.0:* udp6 0 0 :::123 :::* Active UNIX domain sockets (servers and established) Proto RefCnt Flags Type State I-Node Path unix 2 [ ACC ] STREAM LISTENING 8447 /var/run/mysqld/mysqld.sock unix 2 [ ACC ] SEQPACKET LISTENING 6678 /run/udev/control unix 2 [ ACC ] STREAM LISTENING 6482 @/com/ubuntu/upstart unix 2 [ ACC ] STREAM LISTENING 7543 /var/run/dbus/system_bus_socket unix 7 [ ] DGRAM 7551 /dev/log unix 2 [ ACC ] STREAM LISTENING 7650 /var/run/nscd/socket unix 2 [ ] DGRAM 7156424 unix 3 [ ] STREAM CONNECTED 7156137 /var/run/dbus/system_bus_socket unix 3 [ ] STREAM CONNECTED 7156136 unix 2 [ ] DGRAM 7156135 unix 2 [ ] DGRAM 7155834 unix 2 [ ] DGRAM 9734 unix 3 [ ] STREAM CONNECTED 9151 /var/run/dbus/system_bus_socket unix 3 [ ] STREAM CONNECTED 9150 unix 3 [ ] STREAM CONNECTED 9136 /var/run/dbus/system_bus_socket unix 3 [ ] STREAM CONNECTED 9135 unix 3 [ ] STREAM CONNECTED 9106 /var/run/dbus/system_bus_socket unix 3 [ ] STREAM CONNECTED 9105 unix 2 [ ] DGRAM 9073 unix 3 [ ] STREAM CONNECTED 7575 /var/run/dbus/system_bus_socket unix 3 [ ] STREAM CONNECTED 7574 unix 3 [ ] STREAM CONNECTED 7565 unix 3 [ ] STREAM CONNECTED 7564 unix 3 [ ] STREAM CONNECTED 7332 @/com/ubuntu/upstart unix 3 [ ] STREAM CONNECTED 7330 unix 3 [ ] DGRAM 6712 unix 3 [ ] DGRAM 6711 unix 3 [ ] STREAM CONNECTED 6662 @/com/ubuntu/upstart unix 3 [ ] STREAM CONNECTED 6635

    Read the article

  • ruby on rails: undefined method "version_requirements' when attempting to start server after new install

    - by ezabak
    Hi there, I had to newly install ruby on rails recently. When I attempted to start the server for a project I had already been working on previous to this new install, I received the following error: $ ruby script/server => Booting WEBrick... ./script/../config/../vendor/rails/railties/lib/rails/gem_dependency.rb:107:in `requirement': undefined method `version_requirements' for #<Gem::Dependency:0xb74bf764> (NoMethodError) from ./script/../config/../vendor/rails/railties/lib/initializer.rb:292:in `check_gem_dependencies' from ./script/../config/../vendor/rails/railties/lib/initializer.rb:292:in `map' from ./script/../config/../vendor/rails/railties/lib/initializer.rb:292:in `check_gem_dependencies' from ./script/../config/../vendor/rails/railties/lib/initializer.rb:165:in `process' from ./script/../config/../vendor/rails/railties/lib/initializer.rb:112:in `send' from ./script/../config/../vendor/rails/railties/lib/initializer.rb:112:in `run' from /media/78C0-455B/bidmc/schedule/config/environment.rb:13 from /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:36:in `gem_original_require' from /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:36:in `require' from /media/78C0-455B/bidmc/schedule/vendor/rails/activesupport/lib/active_support/dependencies.rb:153:in `require' from /media/78C0-455B/bidmc/schedule/vendor/rails/activesupport/lib/active_support/dependencies.rb:521:in `new_constants_in' from /media/78C0-455B/bidmc/schedule/vendor/rails/activesupport/lib/active_support/dependencies.rb:153:in `require' from /media/78C0-455B/bidmc/schedule/vendor/rails/railties/lib/commands/servers/webrick.rb:59 from /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:36:in `gem_original_require' from /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:36:in `require' from /media/78C0-455B/bidmc/schedule/vendor/rails/activesupport/lib/active_support/dependencies.rb:153:in `require' from /media/78C0-455B/bidmc/schedule/vendor/rails/activesupport/lib/active_support/dependencies.rb:521:in `new_constants_in' from /media/78C0-455B/bidmc/schedule/vendor/rails/activesupport/lib/active_support/dependencies.rb:153:in `require' from /media/78C0-455B/bidmc/schedule/vendor/rails/railties/lib/commands/server.rb:49 from /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:36:in `gem_original_require' from /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:36:in `require' from script/server:3 I have the latest versions of ruby, rubygems, and rails. Any suggestions? Thanks.

    Read the article

  • Is this the only way to pass a parameter for Cakephp to work with JQuery Ajax

    - by kwokwai
    Hi all, I was doing some self-learning on how to pass data from JQuery Ajax to a particular URL in CakePHP: I have tested three sets of codes that the first one was working well, but the rest failed to work, which makes me so confused. Could some experts here tell why the second and the third sets of codes failed to pass any data? Set 1: <input type=text name="data[User][name]" id="data[User][name]" size="36" maxlength="36"/> var usr = $("#data\\[User\\]\\[name\\]").val(); $.post( "http://www.washington.byethost18.com/site1/toavail/"+usr, function(msg){alert(msg);} ); Set 2: <input type=text name="data[User][name]" id="data[User][name]" size="36" maxlength="36"/> var usr = $("#data\\[User\\]\\[name\\]").val(); $.post( "http://www.washington.byethost18.com/site1/toavail/", {queryString: ""+usr+""}, function(msg){alert(msg);} ); Set 3: <input type=text name="data[User][name]" id="data[User][name]" size="36" maxlength="36"/> var usr = $("#data\\[User\\]\\[name\\]").val(); $.post( "http://www.washington.byethost18.com/site1/toavail/", usr, function(msg){alert(msg);} );

    Read the article

  • What is causing my spacebar to randomly stop working?

    - by Chris Billington
    A couple of times a day, I'll be typing something and realise I can't type spaces. Usually the cursor will flicker instead when I press the spacebar, and I can type all other letters as far as I can tell. If I'm in a terminal the cursor turns from a solid square to an empty square until I release the spacebar. For some reason, restarting compiz with alt-F2 compiz fixes it, until it next occurs. I can still copy and paste spaces from sources that already have them, and I can still insert spaces with ctrl-shift-u, 20, enter. This has been happening for a while, since before I upgraded to maverick, but it feels like its beceoming more frequent. There really doesn't seem to be any kind of a pattern to it. I'm using 64 bit ubuntu 10.10 on a system76 panp7 laptop. Any ideas how I might troubleshoot? EDIT: using xev, normally a spacebar registers as: KeyPress event, serial 36, synthetic NO, window 0x5600001, root 0x101, subw 0x0, time 26488647, (88,403), root:(748,458), state 0x10, keycode 65 (keysym 0x20, space), same_screen YES, XLookupString gives 1 bytes: (20) " " XmbLookupString gives 1 bytes: (20) " " XFilterEvent returns: False KeyRelease event, serial 36, synthetic NO, window 0x5600001, root 0x101, subw 0x0, time 26488729, (88,403), root:(748,458), state 0x10, keycode 65 (keysym 0x20, space), same_screen YES, XLookupString gives 1 bytes: (20) " " XFilterEvent returns: False But when it's stopped behaving a press of the spacebar instead gives the three events: FocusOut event, serial 36, synthetic NO, window 0x5600001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 36, synthetic NO, window 0x5600001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 36, synthetic NO, window 0x0, keys: 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 FURTHER EDIT: Ok, so I think I've solved the problem, and by that I mean I now know which package to file a bug against. I have a hot corner which initiates a window picker, and I've customised the window picking so that left click goes to a window, right click closes one and spacebar zooms in on one. When I go to this hot corner, compiz must take control of my spacebar, and clearly isn't giving it back when I leave the window picker. So I'll be filing a bug against compiz. reported:here

    Read the article

  • Agile team with no dedicated Tester members. Insane or efficient?

    - by MetaFight
    I'm a software developer. I've been thinking a lot about the efficiency of the Software Testers I've worked with so far in my career. In fact, I've been thinking a lot about the Software Testers role in general and have reached a potentially contentious conclusion: Non-developer Software Testers staff are less efficient at software testing than developers. Now, before everyone gets upset, hear me out. This isn't mere opinion: Software Testing and Software Development both require a lot of skills in common: Problem solving Thinking about corner cases Analytical skills The ability to define clear and concise step-by-step scenarios What developers have in addition to this is the ability to automate their tests. Yes, I know non-dev testers can automate their tests too, but that often then becomes a test maintenance issue. Because automating UI tests is essentially programming, non-dev members encounter all the same difficulties software developers encounter: Copy-pasta, lack of code reusibility/maintainability, etc. So, I was wondering. Why not replace all non-dev roles with developer roles? Developers have the skills required to perform Software Testing tasks, and they have the skills to automate tests and keep them maintainable. Would the following work: Hire a bunch of developers and split them into 2 roles: Software developers Software developers doing testing (some manual, mostly automated by writing integration tests, unit tests, etc) Software developers doing application support. (I've removed this as it is probably a separate question altogether) And, in our case since we're doing Agile development, rotate the roles every sprint or two. Also, if at all possible, try to have people spend their Developer stints and Testing stints on different projects. Ideally you would want to reduce the turnover rate per rotation. So maybe you could have 2 groups and make sure the rotation cycles of the groups are elided. So, for example, if each rotation was two sprints long, the two groups would have their rotations 1 sprint apart. That way there's only a 50% turn-over rate per sprint. Am I crazy, or could this work? (Obviously a key component to this working is that all devs want to be in the 3 roles. Let's assume I'm starting a new company and I can hire these ideal people) Edit I've removed the phrase "QA", as apparently we are using it incorrectly where I work.

    Read the article

  • Objects not loading on second request in Restkit

    - by Holger Edward Wardlow Sindbæk
    I'm sending off 2 requests simultaneously with Restkit and I receive a response back from both of them, but only one of the requests receives any objects. If I send them off one by one, then my objectloader receives all objects. First request: self.firstObjectManager = [RKObjectManager sharedManager]; [self.firstObjectManager loadObjectsAtResourcePath:[NSString stringWithFormat: @"/%@.json", subUrl] usingBlock:^(RKObjectLoader *loader){ [loader.mappingProvider setObjectMapping:designArrayMapping forKeyPath:@""]; loader.userData = @"design"; loader.delegate = self; [loader sendAsynchronously]; }]; Second request: self.secondObjectManager = [RKObjectManager sharedManager]; [self.secondObjectManager loadObjectsAtResourcePath:[NSString stringWithFormat: @"/%@.json", subUrl] usingBlock:^(RKObjectLoader *loader){ [loader.mappingProvider setObjectMapping:designerMapping forKeyPath:@""]; loader.userData = @"designer"; loader.delegate = self; [loader sendAsynchronously]; }]; My objecloader: -(void)objectLoader:(RKObjectLoader *)objectLoader didLoadObjects:(NSArray *)objects { //NSLog(@"This happened: %@", objectLoader.userData); if (objectLoader.userData == @"design") { NSLog(@"Design happened: %i", objects.count); }else if(objectLoader.userData == @"designer"){ NSLog(@"designer: %@", [objects objectAtIndex:0]); } } My response: 2012-11-18 14:36:19.607 RestKitTest5[14220:c07] Started loading of request: designer 2012-11-18 14:36:22.575 RestKitTest5[14220:c07] I restkit.network:RKRequest.m:680:-[RKRequest updateInternalCacheDate] Updating cache date for request <RKObjectLoader: 0x95c3160> to 2012-11-18 19:36:22 +0000 2012-11-18 14:36:22.576 RestKitTest5[14220:c07] response code: 200 2012-11-18 14:36:22.584 RestKitTest5[14220:c07] Design happened: 0 2012-11-18 14:36:22.603 RestKitTest5[14220:c07] I restkit.network:RKRequest.m:680:-[RKRequest updateInternalCacheDate] Updating cache date for request <RKObjectLoader: 0xa589b50> to 2012-11-18 19:36:22 +0000 2012-11-18 14:36:22.605 RestKitTest5[14220:c07] response code: 200 2012-11-18 14:36:22.606 RestKitTest5[14220:c07] designer: <DesignerData: 0xa269fc0> Update: Setting my base url RKURL *baseURL = [RKURL URLWithBaseURLString:@"http://iphone.meer.li"]; [RKObjectManager setSharedManager:[RKObjectManager managerWithBaseURL:baseURL]]; Solution Problem was that I used the shared manager for both object managers, so I ended up doing: RKURL *baseURL = [RKURL URLWithBaseURLString:@"http://iphone.meer.li"]; RKObjectManager *myObjectManager = [[RKObjectManager alloc] initWithBaseURL:baseURL]; self.firstObjectManager = myObjectManager; and: RKURL *baseURL = [RKURL URLWithBaseURLString:@"http://iphone.meer.li"]; RKObjectManager *myObjectManager = [[RKObjectManager alloc] initWithBaseURL:baseURL]; self.secondObjectManager = myObjectManager;

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >