Search Results

Search found 592 results on 24 pages for 'lspci'.

Page 4/24 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• How to get D-Link DWA-547 working on Ubuntu 13.10?

  - by Tan Kah Ping

  I got a D-Link DWA-547 Wifi card which is supposed to work out-of-the-box with Linux. Says so here: http://wireless.kernel.org/en/users/Drivers/ath9k/products/external While lspci does list the device, NetworkManager doesn't seem to allow me to configure Wifi. lsmod also shows that ath9k isn't loaded. Manually loading with 'modprobe ath9k' doesn't help. How do I get this card working on Ubuntu 13.10 64-bit?

  Read the article

• Screen corruption with 946G / 82945G/GZ [closed]

  - by Ferdinandhi

  Since version 10.04 I have problems with Ubuntu (I think) my graphics card. This problem arises especially when working with graphics or CPU usage much. The problem is that it breaks the GUI as you see in the image and the entire computer is very slow. I'm running Ubuntu 11.04 and have a Intel graphics card 945G x86/MMX/SSE2. I used Unity and Gnome 3 with the same results. lspci returns 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)

  Read the article

• blacklist VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE

  - by Thomas Labensi

  I have an hp a310n pavillion I have installed an nvidia pci geforce card I want to blacklist the VGA compa[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03)integrated graphics what do I need to do?? tom@tom-DM167A-ABA-a310n:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03) 02:09.0 VGA compatible controller: NVIDIA Corporation NV11 [GeForce2 MX/MX 400] (rev b2) tom@tom-DM167A-ABA-a310n:~$ I'm using the nvidia via neuvoux and I want to really make sure I'm using the nvidia card

  Read the article

• Minecraft running slow after 13.10 upgrade

  - by user204279

  What to took for when Minecraft is running slow (~10 FPS) after a simple Ubuntu upgrade (from 13.04 to 13.10) without any manual change in the hardware/software graphic configuration and in the Minecraft configuration? Before the upgrade, it was running very well everytime (~60 FPS constantly). Any help? lspci | grep "VGA compatible controller" 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Whistler [Radeon HD 6730M/6770M/7690M XT] (rev ff)

  Read the article

• No network connectivity (not wired or wireless) - RT5390

  - by Ben Udy

  I am starting to think I simply need to accept a small loss and sell my new ASUS K73E. Because I really don't enjoy computing when I have to deal with Windough$ and this windows 7 64 bit on my new ASUS is even worse than the old machines with XP. I have written to ASUS and they simply say "We don't support Linux" and while Ralink's website says they do support Linux I can't get anyone to tell me what model Ralink card might be in my machine. Is anyone out there who might be able to give me some useful advice???? Here is the answer to command lspci nn && lsusb && lsmod && rfkill list all: di,snd_seq snd 54244 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device uvcvideo 57374 0 videodev 34361 1 uvcvideo v4l1_compat 13251 2 uvcvideo,videodev soundcore 6620 1 snd snd_page_alloc 7076 2 snd_hda_intel,snd_pcm psmouse 63677 0 serio_raw 3978 0 lp 7028 0 parport 32635 2 ppdev,lp fbcon 35102 71 tileblit 1999 1 fbcon font 7557 1 fbcon bitblit 4707 1 fbcon softcursor 1189 1 bitblit video 17375 0 output 1871 1 video vga16fb 11385 1 vgastate 8961 1 vga16fb ahci 32360 2 di,snd_seq snd 54244 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device uvcvideo 57374 0 videodev 34361 1 uvcvideo v4l1_compat 13251 2 uvcvideo,videodev soundcore 6620 1 snd snd_page_alloc 7076 2 snd_hda_intel,snd_pcm psmouse 63677 0 serio_raw 3978 0 lp 7028 0 parport 32635 2 ppdev,lp fbcon 35102 71 tileblit 1999 1 fbcon font 7557 1 fbcon bitblit 4707 1 fbcon softcursor 1189 1 bitblit video 17375 0 output 1871 1 video vga16fb 11385 1 vgastate 8961 1 vga16fb ahci 32360 2 Edit #2 lspci 00:00.0 Host bridge: Intel Corporation Device 0104 (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Device 0116 (rev 09) 00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b5) 00:1c.5 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 6 (rev b5) 00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation Device 1c49 (rev 05) 00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05) 02:00.0 Network controller: RaLink Device 5390 03:00.0 Ethernet controller: Atheros Communications Device 1083 (rev c0) lsusb Bus 002 Device 002: ID 8087:0024 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 13d3:5710 IMC Networks Bus 001 Device 002: ID 8087:0024 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Thanks for the suggestion because this gave me a model for Ralink RT5390. I have now gone to Ralink.com and downloaded (via Windows 7) the driver package (it is a bz2 file). I hope I can figure out how to install it. And FYI - I was not able to run su (not authorized?) and dmidecode didn't exist (probably needs to be downloaded BUT no internet yet in Ubuntu)

  Read the article

• Screen corruption with 946G / 82945G/GZ

  - by Ferdinandhi

  Since version 10.04 I have problems with Ubuntu (I think) my graphics card. This problem arises especially when working with graphics or CPU usage much. The problem is that it breaks1 the GUI as you see in the ![image and the entire computer is very slow: I'm running Ubuntu 11.04 and Intel graphics card 945G x86/MMX/SSE2 I used Unity and Gnome 3 with the same results. lspci--- 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)

  Read the article

• Low graphics mode error on startup with NVIDIA graphics (12.04 LTS )

  - by champost

  My problem is similar to two other posts concerning ATI cards and 12.04 LTS: Post1 & Post2. In my case I use a Dell Precision M4300 laptop which uses a NVidia Quadro FX 880M. Doing a lspci | grep VGA gave me this: 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [Quadro FX 880M] (rev a2) My workaround consists of logging in at the console and running sudo start lightdm which works perfectly but I am looking for a better workaround than this ?

  Read the article

• Unity won't load with proprietary drivers

  - by Nobita

  First time running Ubuntu 11.04 and getting used to Unity, I decided to install proprietary drivers for my Nvidia graphic card. The output of lspci | grep VGA is: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: nVidia Corporation Device 0df5 (rev a1) If I activate the driver that is "recommended", next time I try to login in a Unity session it just changes to the classic. How can that be happening? I attach the screenshoot of my proprietary driver screen:

  Read the article

• Notification / tray icon / applet drop downs disappear or flicker when clicked

  - by postfuturist

  For some reason, after upgrading to 11.10, the tray icon drop-down menus don't persist after a single click about 2/3 of the time. They always work if I click-and-hold, but I'm used to just clicking once to examine the menu. The behavior is not consistent, so the drop down menus will stay after click about 1 in 3 times. I'm running 64 bit Ubuntu on a dual-monitor setup. EDIT: from lspci: 01:00.0 VGA compatible controller: nVidia Corporation M116N (rev a2)

  Read the article

• Ubuntu 11.10 Intel controller VGA detected but no signal

  - by Fred Zimmerman

  Ubuntu 11.10 Dell vostrum Intel® Sandybridge Mobile x86/MMX/SSE2 Displays ... correctly detects and identifies Viewsonic 27" VGA monitor, but monitor says it's receiving no signal Plugged into another monitor (Sony 20"), same result. $ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) I've browsed these forums and tried everything that I can but nothing has worked. I need a stepwise troubleshooting plan.

  Read the article

• Dell Latitude E6420 in-built microphone not working

  - by user38845

  I'm running with Ubuntu 12.04 64bit on Dell Latitude E6420. The inbuilt microphone is not working, and is not listed on the sound settings dialog. According to lspci, the device is: 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) I've also looked at alsamixer, and can see a "mic" and "dock mic" but fiddling with these and increasing to max amplification doesn't appear to change anything. Note: I've raised a certification question on the same topic here: https://answers.launchpad.net/ubuntu-certification/+question/200678

  Read the article

• How to enable desktop effects on Ubuntu 10.04 after upgrade from Ubuntu 8.04?

  - by Manohar Bhattarai

  I upgraded my Ubuntu 8.04 to Ubuntu 10.04. When I try to enable desktop effects it says "Desktop effects could not be enabled". The output of "lspci | grep VGA" is : 00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03) Hardware drivers says there is no propriority hardware driver. I installed nVidia driver but I think my is an Intel graphics device. Please help.

  Read the article

• Steam doesnt launch , ubuntu 12.10

  - by Star Diamond

  I installed steam for ubuntu , so I tried to launch it and i get this : ~$ steam Installing breakpad exception handler for appid(steam)/version(1352224866_client) ~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.10 Release: 12.10 Codename: quantal ~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler XT [AMD Radeon HD 6700M Series] (rev ff) What is the problem and how to fix it? thank you

  Read the article

• 12.10 blue screen, desktop environnement does not load

  - by louis

  just upgraded to Ubuntu 12.10. I can't reach the desktop, it is stuck on the blue screen, the desktop environnement does not load. Can you help please? config: thinkpad T400, 6 GB of Ram, graphic card: Intel Gma 4500Mhd lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) I am not sure I have not messed up lightdm / gdm previously...

  Read the article

• No sound for headphones

  - by Joel Lino

  I was trying some of the solutions published in this forum for the same problem, but just one in particular work for me: add the line of code in the file alsa-base.conf. This just works for a few days, now the problem is back again. Any solution to fix this problem for good? Compaq Presario CQ40 $ lspci | grep -i audio 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller

  Read the article

• Wifi problems after upgrading to 13.10

  - by Simon

  I just upgraded to Ubuntu 13.10, but since the upgrade I don't have internet access via wifi anymore. I can: See networks Connect to a network Ping myself (localhost, 192.168.0.103) I can't: Ping others (including other devices on the same wireless network, including the gateway/router) Resolve hosts Access any other external resource, whether on my own network or on the internet Using Wireshark, I noticed my computer is continuously sending ARP-requests like "Who has 192.168.0.1 [which is the gateway]? Tell 192.168.0.103". It doesn't get any replies though. When I ping another IP-address for which it knows the mac-address (from cache), it turns out a packet loss of 90% occurs, and even if a packet manages to arrive it takes around 3000ms. The output of route -n is: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth1 192.168.0.0 0.0.0.0 255.255.255.0 U 9 0 0 eth1 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 Before upgrading, wifi worked fine. Using other devices, wifi still works fine.Resetting the router didn't help. Ethernet still works after upgrading. Any suggestions? Update: I'm using the wl driver. Here's the relevant output of some commands: lspci | grep Wireless 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01) cat /etc/modprobe.d/blacklist.conf [...] blacklist mac80211 blacklist brcm80211 blacklist cfg80211 blacklist lib80211_crypt_tkip blacklist lib80211 blacklist b43 cat /etc/rc.local sudo modprobe -r lib80211 sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_wep.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_tkip.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_ccmp.ko sudo modprobe wl exit 0 The last lines are probably how I got wireless working after the previous upgrade (wireless has been a problem after each upgrade). Update 2: added information about the exact hardware below. The hardware is an integrated device, so I ran lspci -nn | grep -i network. The output is: 03:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01)

  Read the article

• Wireless broken after latest 12.04 update

  - by inderpaldeol

  I updated 12.04 yesterday and it broke my wireless connection. iwconfig lo no wireless extensions. eth0 no wireless extensions. l@ubuntu:~$ lspci|grep Network 03:00.0 Network controller: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe In the hardware drivers, I see - rt3090sta is activated but currently not in use. WICD does not show wireless networks. Can someone help me please? Thanks id

  Read the article

• Wired Network (eth0) disappears on a Lenovo Z570

  - by theGeek

  I upgraded from Ubuntu 11.10 to 12.04 yesterday. I am running a BSNL Broadband DSL conenction. The wired network suddenly dissapears and the computer stops detecting the ethernet card after sometime. However, after rebooting, it again becomes alright. Specs : Lenovo Ideapad Z570 Intel i5 2nd Gen. processor 3 GB RAM $ lspci | grep Ethernet 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)

  Read the article

• Broadcom device 4365 wireless driver for 12.04

  - by NilPointer

  My laptop (Dell Inspiron 17R 5720) came with preinstalled Ubuntu 11.10. I removed it and installed 12.04. Now I can't find driver for wireless. Apparently, in 11.10 there was Broadcom-STA driver. But in 12.04 there is no additional drivers to install. I tried using: sudo m-a a-i broadcom-sta But building fails on 26%. How can I install driver According to lspci i got: Broadcom Corporation Device 4365 (rev 01)

  Read the article

• update manager has killed wifi after i finally got it working [closed]

  - by Bobble Off

  HI i had just got my wifi to work properly in 12.04 and I got a pop up from update manager saying there was 100's of updates I needed to install so i installed them it then said I needed to reboot which I did but now my wifi isn't working I go add a new connection and I have no wifi option just Ethernet also the pci card is showing no signs of life (the green light is not light) but when i go in to terminal and type lspci it is showing my wifi card in the list whats gone wrong and how do i fix it???

  Read the article

• Running crysis 2 on ubuntu gives me an error message

  - by ShajD

  so i recently installed ubuntu alongside windows 7 and i installed crysis 2 with wine. crysis 2 works fine when i run windows, however when i run it using wine in ubuntu cryengine gives me a message saying, "Unsupported video card detected! Continuing to run migth lead to unexpected results or crashes....." i've got two video cards ones an intel and the other's a nvidia. i typed lspci into the terminal and my nvidia card was listed under video controller as well

  Read the article

• Video and LAN Cards are not recognized on Intel DG41RQ MB

  - by artyom

  Hello, My 32 bit Debian Etch with Etch-n-Half kernel 2.6.24 and Etch-n-half video driver xserver-xorg-video-intel 2.2.1-1~etchnhalf2 does not recognize my on-board LAN and Video. I can work only with VESA display. And additional PCI LAN card (that I wanted to use for Cross-X-Cabel). output of lspci 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03) 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 04:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10 According to MB Spec: Video: Intel G41 Express Chipset Graphics and Memory Controller Hub Graphics (GMCH) LAN: Realtek 8111D Gigabit Ethernet Controller LAN Support When I run dpkg-reconfigure xserver-xorg is suggest i810 driver but X does not start, it does not start with intel driver as well; only vesa. LAN I even can't find in lspci... the last Realtek card is external one 100MB card. Where to start from?

  Read the article

• How can I make my PCI-E graphics card visible to Ubuntu when the motherboard has integrated graphics

  - by Norman Ramsey

  I have a Gigabyte GA-MA74GM-S2 motherboard with integrated graphics that shows up on lspci as an ATI Radeon 2100. I also bought a PCI-Express Nvidia graphics card so I could use the VDPAU feature on Linux (plays H.264 in hardware). The BIOS has three settings about which display to initialize first: Integrated graphics PCI graphics PCI-Express graphics (PEG) I set the BIOS on PEG, but I cannot get anything, not even a splash screen or POST messages, to emerge from the PCI-Express graphics card. (I'm using a DVI connector; the card also has an HDMI output.) I cannot get the kernel lspci to see the graphics card; the only VGA controller it acknowledges is the integrated one. Running dmidecode acknowledges the existence of an x16 PCI Express slot, and it says Current usage: Unknown There is an additional BIOS setting called "Internal Graphics Mode" which is normally set to "Auto" which means it is supposed to prefer a PCI Express VGA card. I set it to "Disabled" which now means I'm getting no output at all. I will soon be learning how to do a BIOS reset! Other information: The PCI-E card is a MSI N210-MD512H GeForce 210. This is a fanless card. Although there are no fans to see turning, the heat sink on the PCI-E card is definitely getting hot, so the card is getting some sort of power. It gets all its power from the PCI-E slot; there is no external power connector. The BIOS is an AMI Award BIOS. My question: how can I make the PCI Express graphics card visible to Ubuntu?

  Read the article

• Video card not detected on Lenovo T410 in Linux

  - by wich

  I have a T410 with an nVidia NVS 3100M, this is not a hybrid system, there is no Optimus. (No option in the BIOS for Optimus, lspci in linux as well as the Windows device manager only show the nVidia) Using lspci I see the GPU as a present device, however, I can not, for the life of me, get any video driver to work that will let me start an X session, every time X craps out with the error (EE) No devices detected. I have tried the nVidia binary blob, (with nvidia-config, made sure no nvidia support in the kernel), I have tried nouveau, I have tried nv, I have even tried generic vesa, nothing will work. When I compare the dmesg that I get when loading the nvidia kernel module, I see that it is missing some lines compared with another system that also has an nvidia card, specifically the line mentioning the GPU name (3100M) is not there. I have checked every option in the BIOS, there is nothing to control except for the BIOS video output port, which is set to the LCD panel. I have no idea anymore what the problem may be, or even how I can diagnose this problem further. Any help will be appreciated.

  Read the article

• Debian: What are these files in /sys/devices/pci0000:00/ for?

  - by muhuk

  I am running Debian Squeeze on an MSI M670 laptop. I have these following files on my root drive, each 256MB: file:///sys/devices/pci0000:00/0000:00:05.0/resource1 file:///sys/devices/pci0000:00/0000:00:05.0/resource1_wc Here is my lspci output: muhuk@debian:~$ lspci 00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) 00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2) 00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2) 00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2) 00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) 00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2) 00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2) 00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) 00:05.0 VGA compatible controller: nVidia Corporation C51 [GeForce Go 6100] (rev a2) 00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2) 00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3) 00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3) 00:0a.3 Co-processor: nVidia Corporation MCP51 PMU (rev a3) 00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) 00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) 00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1) 00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) 00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) 00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2) 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2) 00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 04:04.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 04:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01) 04:04.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) 04:09.0 Network controller: RaLink RT2561/RT61 rev B 802.11g I am speculating these have something to do with the shared RAM my GPU is using. But why a file on disk? And why two of them?

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >