Search Results

Search found 592 results on 24 pages for 'lspci'.

Page 8/24 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

• HP mini 5102 Ethernet does not work after suspend on Lubuntu 12.10

  - by Marcin

  Ethernet works fine after system is rebooted The onboard card is seen in 'lspci' as: 43:00.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Optima 88E8059 [PCIe Gigabit Ethernet Controller with AVB] (rev 11) After system being suspended the sky2 driver loads but does not enable the NIC. I have noticed that it happens when PC is left suspended for longer period of time (few houres) Trying to reproduce it I have tried to load the sky2 driver with 'modprobe sky2'. Unfortunately typing 'ifconfig -a' for the onboard ethernet adapter does not list the driver once the sky2 driver is loaded. I have searched internet and I found some information about a bug in kernel. Hovewer it was reported in 2010 so I hope it has been fixed. Here it is http://lists.opensuse.org/opensuse-bugs/2010-02/msg01473.html

  Read the article

• Why has wireless disappeared after my 12.10 upgrade?

  - by Shay Guy

  I just upgraded to 12.10 on my Lenovo B570 laptop. NetworkManager isn't displaying a submenu for wireless connections at all, even though I downloaded the update through the wireless connection. This displeases me. Stuff I've tried includes: $ sudo modprobe wl FATAL: Module wl not found. $ sudo lspci -nn | grep "BCM" 02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) $ rfkill list all 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no ETA: linux-headers-generic is already the newest version, and what I get when reinstalling bcmwl-kernel-source includes the following, near the end. DKMS: install completed. ERROR: Module b43 does not exist in /proc/modules ERROR: Module b43legacy does not exist in /proc/modules ERROR: Module ssb does not exist in /proc/modules ERROR: Module bcm43xx does not exist in /proc/modules ERROR: Module brcm80211 does not exist in /proc/modules ERROR: Module brcmfmac does not exist in /proc/modules ERROR: Module brcmsmac does not exist in /proc/modules ERROR: Module bcma does not exist in /proc/modules FATAL: Module wl not found.

  Read the article

• Why won't USB 3.0 external hard drive run at USB 3.0 speeds?

  - by jgottula

  I recently purchased a PCI Express x1 USB 3.0 controller card (containing the NEC USB 3.0 controller) with the intent of using a USB 3.0 external hard drive with my Linux box. I installed the card in an empty PCIe slot on my motherboard, connected the card to a power cable, strung a USB 3.0 cable between one of the new ports and my external HDD, and connected the HDD to a wall socket for power. Booting the system, the drive works 100% as intended, with the one exception of throughput: rather than using SuperSpeed 4.8 Gbps connectivity, it seems to be falling back to High Speed 480 Mbps USB 2.0-style throughput. Disk Utility shows it as a 480 Mbps device, and running a couple Disk Utility and dd benchmarks confirms that the drive fails to exceed ~40 MB/s (the approximate limit of USB 2.0), despite it being an SSD capable of far more than that. When I connect my USB 3.0 HDD, dmesg shows this: [ 3923.280018] usb 3-2: new high speed USB device using ehci_hcd and address 6 where I would expect to find this: [ 3923.280018] usb 3-2: new SuperSpeed USB device using xhci_hcd and address 6 My system was running on kernel 2.6.35-25-generic at the time. Then, I stumbled upon this forum thread by an individual who found that a bug, which was present in kernels prior to 2.6.37-rc5, could be the culprit for this type of problem. Consequently, I installed the 2.6.37-generic mainline Ubuntu kernel to determine if the problem would go away. It didn't, so I tried 2.6.38-rc3-generic, and even the 2.6.38 nightly from 2010.02.01, to no avail. In short, I'm trying to determine why, with USB 3.0 support in the kernel, my USB 3.0 drive fails to run at full SuperSpeed throughput. See the comments under this question for additional details. Output that might be relevant to the problem (when booting from 2.6.38-rc3): Relevant lines from dmesg: [ 19.589491] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 19.589512] xhci_hcd 0000:03:00.0: setting latency timer to 64 [ 19.589516] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 19.589623] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 12 [ 19.650492] xhci_hcd 0000:03:00.0: irq 17, io mem 0xf8100000 [ 19.650556] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X [ 19.650560] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X [ 19.650563] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X [ 19.653946] xHCI xhci_add_endpoint called for root hub [ 19.653948] xHCI xhci_check_bandwidth called for root hub Relevant section of sudo lspci -v: 03:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30) Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f8100000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] #18 Kernel driver in use: xhci_hcd Kernel modules: xhci-hcd Relevant section of sudo lsusb -v: Bus 012 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.38-020638rc3-generic xhci_hcd iProduct 2 xHCI Host Controller iSerial 1 0000:03:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Full, non-verbose lsusb: Bus 012 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 003: ID 04d9:0702 Holtek Semiconductor, Inc. Bus 009 Device 002: ID 046d:c068 Logitech, Inc. G500 Laser Mouse Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 006: ID 174c:5106 ASMedia Technology Inc. Bus 003 Device 004: ID 0bda:0151 Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader) Bus 003 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 006: ID 1687:0163 Kingmax Digital Inc. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 046d:081b Logitech, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Full output: full dmesg full lspci full lsusb

  Read the article

• Broadcom 4365 wireless driver on 12.04 with 3.4 / 3.5 kernel

  - by zaid

  I used this package to install the driver on 3.2 Kernel and it was working perfectly. Unfortunately the system used to freeze randomly with 3.2 kernel so I installed 3.4 kernel, now there is no freezing, the only problem is that my wifi card is not working, I tried to re-install the package, but didn't work. I can see the driver in the "additional drivers" and it say that it is active, but when I execute iwconfig it doesn't show up. I've even tried ndiswraper and that didn't work either. my lspci: 01:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01)

  Read the article

• google earth 7, 32bit in 12.10 runs without error but there is no image (globe)

  - by Dennis

  Everything seemed to install fine. I can start google earth and all layers are available, I can even zoom in and look at 3-D buildings. But there is absolutely no image data displayed at all. If you look at the whole globe the outlines are there on an invisible globe. As you zoom in the base looks dark grey almost black but there is no image. I have tried. Tools Options Graphics Safe Mode Tools Options Texture colors all combinations Tools Options Cache (tried several changes to the numbers) lspci shows Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) Running on a Dell Inspiron 6000 laptop (1.5Gb memory)

  Read the article

• Trouble with 12.10 lag

  - by Brennan

  Well basicly lately I have been having lag problems with 12.10. I will post my specs, but before the update to 12.10, it said that I had intel graphics. Now it says I have Gallium. My specs: *Memory: 3.9 GiB *Processor: Pentium(R) Dual-Core CPU E5500 @ 2.80GHz × 2 *Graphics: Gallium 0.4 on llvmpipe (LLVM 3.2, 128 bits) (used to say intel graphics) *OS Type: 32-bit *Disk: 486.1 GB The output of the command sudo apt-cache check is this: E: Invalid operation check The output of the command sudo lspci -nnk | grep -A5 VGA is this: 00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e32] (rev 03) Subsystem: ASUSTeK Computer Inc. Device [1043:836d] Kernel driver in use: i915 00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 01) Subsystem: ASUSTeK Computer Inc. Device [1043:8445] Kernel driver in use: snd_hda_intel

  Read the article

• video/audio output via HDMI Ubuntu 12.04

  - by lostNfound

  I've been out of the Ubuntu loop for quite a while now and have a completely new laptop now. Just installed Ubuntu 12.04 64-bit and would like to output my video and my audio via HDMI to my television. the following is the lspci | grep VGA for my computer. please tell me if there is any additional information needed and preferably how to obtain it and i will be more than happy to oblige. thank you in advance for your time and assistance in this matter. 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev a1) Edit: every time i restart my computer, after a short moment, i get an error message stating something along the lines "sorry, jockey needed to close unexpectedly." after researching, i discovered jockey is the name of the "additional drivers," which after initial installation, ubuntu informed me of proprietary drivers available. those are no longer available, and this error continues to occur.

  Read the article

• How to charge an iPad?

  - by ibo.ezhe

  Trying to charge my iPad with my Ubuntu 11.10 laptop (HP ProBook 5320m). It connects and I am able to download photos for instance. However battery doesn't charge at all. Does anyone know how to fix this? Output of lspci | grep USB 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)

  Read the article

• Second monitor not coming back on after going into hibernate

  - by dabraude

  10 and a new problem has come up. When I my machine hibernates the second monitor does not come back on. I did not have this problem in 11.04. The main monitor is plugged into a vga port, and the second plugged into a display port then an adapter to vga the system is a Dell Optiplex 790 and the graphics card is (according to lspci) a VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) I am running the classic Gnome desktop though the problem occurs in Unity as well.

  Read the article

• How can I use two video cards to power three screens?

  - by notatoad

  I have two Radeon 6450 graphics cards in my computer, with three screens. Only the screens plugged into the first graphics card are recognized and configurable in the displays setting panel. How can I use the displays plugged into my second graphics card? Both cards are present in lspci: 01:00.0 VGA compatible controller: ATI Technologies Inc NI Caicos [AMD RADEON HD 6450] 01:00.1 Audio device: ATI Technologies Inc NI Caicos HDMI Audio [AMD RADEON HD 6450] 02:00.0 VGA compatible controller: ATI Technologies Inc NI Caicos [AMD RADEON HD 6450] 02:00.1 Audio device: ATI Technologies Inc NI Caicos HDMI Audio [AMD RADEON HD 6450] I'm using the open source driver instead of the proprietary driver because the proprietary driver won't output 1440x2560.

  Read the article

• Broadcom bcm4311 rev2 Full disabled on battery

  - by Antonio BG

  Ok this is my problem... My problem begins while ago when I installed ubuntu 10.10. (is the same with 11.04,11.10...) My wireless card is disabled if the power cord is unplugged, and the only way to fix this is rebooting my pc WITH the power cord plugged and if I use lspci command, it doesn't show me the wireless card. is like if I've removed the wireless board from my laptop port. I've searched a lot of solutions for bcmw4311 issues, but none of them fix my problem because when apply one of the fixes, if I unplug the cord, my wireless card it just gone away... I have dual boot on my pc(w7,ubuntu), I've tried with full installation just to see if this is the problem, but not, is the same. On windows all work correctly with and without power cord.. so this is not a hardware problem, is more like a kernel problem. anyway I can use wireless with power cord plugged, but c'mon this is a laptop not a desktop pc XD haha any help is welcome

  Read the article

• No sound card detected [elementary os]

  - by Silouane Gerin

  h61 I set up a computer for my parents with elementary os. I installed an Asus P8H61-I motherboard which contains an integrated Realtek ALC887 sound card. The system doesn't recognize the sound card. Here are the results of some commands: lspci | grep audio doesn't return anything, alsa force-reload return Unloading ALSA sound driver modules: (none loaded). Loading ALSA sound driver modules: (none to reload). aplay -l no soundcard detected and cat /proc/asound/cards let me know that asound doesn't exist. I tried installing Realtek drivers but nothing happened. Here is a log from alsa : Log Can someone help me? Thanks.

  Read the article

• HP 655 Notebook (Ubuntu 12.04) wireless internet disabled after running updates

  - by Bastian

  Today the update-manaeger suggested that I should download some updates. So I did. After the updates were installed I had to reboot the system. After the reboot my notebook doesn't see any wireless networks. I was looking for a long time on the internet for answers but non of them applies to my case. I have the idea, it has got something to do with the kernel I am currently using (Linux 3.2.0-55). Is this one new for Ubuntu 12.04? When I boot my system I can choose to use an older kernel (linux 3.2.0-32). When I use this one the notebook does see the wireless networks. This is my network card according to the command lspci: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe Anyone an idea to fix my problems with wireless internet?

  Read the article

• Display monitor info via command line

  - by icyrock.com

  Is there a way to query monitor information from command line? For example, get monitor model, similar to e.g. what lspci does for graphic card info, or whether it's currently on or off, things like that. If possible, what kinds of basic information such as the above can be easily gathered? For example, is it possible to determine if monitor is in portrait or landscape position? Or if it has built-in speakers or not? Command line is the preference, but if there's a GUI method, I'd like to hear about it, too.

  Read the article

• Installing Broadcom Wireless Drivers

  - by Fer1805

  I'm having serious problems installing the Broadcom drivers for Ubuntu. It worked perfectly on my previous version, but now, it is impossible. What are the steps to install Broadcom wireless drivers for a BCM43xx card? I'm a user with no advance knowledge in Linux, so I would need clear explanations on how to make, compile, etc. lspci -vnn | grep Network showed: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] iwconfig showed: lo no wireless extensions. eth0 no wireless extensions.

  Read the article

• Wifi not working after upgrading from 12.04 to 13.10

  - by Gary

  I went through loads of posts looking for an answer to my WiFi problems but can't seem to fix it. I had Ubuntu 12.04 installed and WiFi worked fine with no issues whatsoever but then I upgraded to 13.10 it has stopped working. It shows the available networks but I can't connect to any of them it just does that animation thing then stops working. Update Heres the link to pastebin: http://pastebin.com/GyMMEYhv And heres what wifi card i have and driver lspci: 01:00.2 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0a) Subsystem: Hewlett-Packard Company Device [103c:18de] Kernel driver in use: r8169 02:00.0 Network controller [0280]: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe [1814:3290] Subsystem: Hewlett-Packard Company Device [103c:18ec] Kernel driver in use: rt2800pci

  Read the article

• pulseaudio: no microphone configuration

  - by mitsch

  Updated Ubuntu to precise from oneiric on a Dell Inspirion Mini 10 (with an Intel HDA-Soundcard). I can't remember having any issues with the microphone. I didn't need it - I tried ekiga the first time in precise. I couldn't hear any sound in the echo test of ekiga, so I switched to the "System Preferences" and looked for the microphone to boost it. Surprisingly, the microphone input was greyed out - I couldn't mute or unmute, i couldn't even move the volume-slider. On the other hand: I could change the microphone-setting on console with alsamixer, so don't worry about that… :) I just wanted to ask, how to get pulseaudio back to the known, comfortable behaviour. Some newbies won't know the trick to use alsamixer… My soundcard (output of lspci): 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Greets!

  Read the article

• Getting wireless to work on Ubuntu 11.10 (on a mac machine)

  - by yayu

  I have a 2008 white 13.3 inch macbook that now solely runs ubuntu. However, I cannot get wifi or cable to work on it. Regarding the cable, it atleast tries to connect but eventually disconnects from the wired network. Here is the output for lspci (pastebin) I tried installing b43-fwcutter and firmware-b43 but get errors. (I loaded them from a thumb drive and tried sudo dpkg -i). I cannot understand these instructions from the documentation, as I cannot locate the pool directory. b43-fwcutter is located on the Ubuntu install media under ../pool/main/b/b43-fwcutter/ and patch is located under ../pool/main/p/patch/ or both in the official repositories online. Note: In some versions (10.04 and 11.04 at least) there is not a /pool/main/p/patch/ If this file is missing then you don't need it. In this case you only need to install /pool/main/b/b43-fwcutter by following the instructions below.

  Read the article

• how to install drivers for intel corporation mobile gm965 gl960 integrated graphics controller?

  - by SanraS

  I have a "inspiron 1525"and am running 11.10 version of Ubuntu, I noticed that when scrolling I can see a lag and also when playing back HD content it will freeze the video for a few seconds and then resume, none of those happened on winVista when I had it installed, now I do prefer Ubuntu and would like to fix this rather than go back to windows. the chip is an "intel corporation mobile gm965 gl960 integrated graphics controller" as stated by "lspci" I don't know much about dealing with installing drivers that's why I'm asking for help and would like to be commands that I can put on terminal, rather than go here and then there and then look for this or that. I think I'll get lost in the middle but terminal I can follow. thanks for your help.

  Read the article

• How can I solve display glitches and poor performance with ATI fglrx driver on my ThinkPad X100e?

  - by rewbs

  Hi all, I noticed that video performance on my Thinkpad X100e was very poor compared to Windows 7, so I installed the ATI fglrx proprietary drivers by using the "Additional Drivers" dialogue box. The system has an ATI Radeon Mobility HD 3200 chip. The result of installing the drivers is pretty devastatingly negative, with symptoms such as skewed content in windows, browser tabs and text boxes failing to refresh when their content changes. In fact, please excuse typos in this post, because I can't really see what I am typing. :) I also notice that HD video playback performance is no better - perhaps even worse - than prior to installing the drivers. Example of what I see: Here's the output of fglrxinfo: display: :0.0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Radeon HD 3200 Graphics OpenGL version string: 3.3.10237 Compatibility Profile Context Output of lspci | grep -i vga: 01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] I'm on Ubuntu 10.10 with kernel 2.6.35-22-generic-pae. What can I try? Many thanks, -R

  Read the article

• Is it possible to update my graphic card drivers?

  - by madmaxpt

  This is what the lspci -v command shows in the VGA compatible controller section: 00:02.0 VGA compatible controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller (prog-if 00 [VGA controller]) Subsystem: Dell Device 048e Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at f0200000 (32-bit, non-prefetchable) [size=512K] I/O ports at 18d0 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at f0000000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 i915 is only compatible with OpenGL 1.4 and cannot use shaders and I'd like to use some Open GL 2.0 functionalities. Is it possible to update the drivers or is my hardware limited to OpenGL 1.4 ?

  Read the article

• Sound issue in Lubuntu

  - by jvsa90

  I'm recently having a problem in my Lubuntu deskptop: sound through the speakers doesn't seem to work. The funny thing is: it works when I plug in my earphones. I've tried to unmute everything with pavucontrol and alsamixer, but everything seems to be OK. $ sudo aplay -l **** Liste der Hardware-Geräte (PLAYBACK) **** Karte 0: Intel [HDA Intel], Gerät 0: HDA Generic [HDA Generic] Sub-Geräte: 0/1 Sub-Gerät #0: subdevice #0 $ lspci -v | grep -A7 -i "audio" 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) Subsystem: Acer Incorporated [ALI] Device 034a Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at 58200000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel Can anyone guess what's happening? It has worked until recently and it definitely works in my Windows partition.

  Read the article

• Audio output and input stopped working after the last update

  - by renatov

  I'm using Ubuntu 14.04 and everything was perfect until todays's update. Now my audio output (speakers) and input (microphone) stopped working. I guess it's a driver issue, but I need help to debug this problem and to solve it. I have a Dell Inspiron 5421 notebook with an Intel audio integrated sound card: $ lspci | grep Audio 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) If I go to Ubuntu Settings Sound Output, it doesn't show my Intel card there anymore: The same for the Input tab, it doesn's show my Intel card there anymore: Could you please help me?

  Read the article

• PowerXpress error with Driver Catalyst. How can I fix it?

  - by J03Bukowski

  I have install Ubuntu 11.10 64bit on my Hp Dv6-3150el. My Notebook has two graphics cards: lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 01:00.0 VGA compatible controller: ATI Technologies Inc Madison [AMD Radeon HD 5000M Series] I tried to install the proprietary graphics drivers ''fglrx'' available in "Additional Drivers", which does not give me 3D graphics acceleration (and I can't install those post-release). Then I can try to download and install from the website (I tried the version that Catalyst 11.8 11.12). The installation goes perfectly (I followed this guide and others), except that when I configure Xorg.conf file: sudo aticonfig --initial PowerXpress error: Cannot stat '/usr/lib64/fglrx': No such file or directory Failed to initialize libglx for discrete GPU

  Read the article

• Why doesn't Unity 3D work on my HD3000 integrated graphics?

  - by Zatsugami

  So I got my new laptop recently. HP Envy 15 with switchable graphics card. I'm using both windows and ubuntu, but for ubuntu I need just Intel HD3000 for better battery live. I've installed fglrx-updates and fglrx-amdcccle-updates. The drivers seems to work for my ATI card. The problem is, Intel HD3000 does not support Unity 3D. Why? My older Intel GMA 4500 did this. lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] [1002:6741] (rev ff)

  Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >