Search Results

Search found 1710 results on 69 pages for 'daniel wood'.

Page 40/69 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >

  • Why does the rename() syscall prohibit moving a directory that I can't write to a different director

    - by Daniel Papasian
    I am trying to understand why this design decision was made with the rename() syscall in 4.2BSD. There's nothing I'm trying to solve here, just understand the rationale for the behavior itself. 4.2BSD saw the introduction of the rename() syscall for the purpose of allowing atomic renames/moves of files. From 4.3BSD-Reno/src/sys/ufs/ufs_vnops.c: /* * If ".." must be changed (ie the directory gets a new * parent) then the source directory must not be in the * directory heirarchy above the target, as this would * orphan everything below the source directory. Also * the user must have write permission in the source so * as to be able to change "..". We must repeat the call * to namei, as the parent directory is unlocked by the * call to checkpath(). */ if (oldparent != dp->i_number) newparent = dp->i_number; if (doingdirectory && newparent) { VOP_LOCK(fndp->ni_vp); error = ufs_access(fndp->ni_vp, VWRITE, tndp->ni_cred); VOP_UNLOCK(fndp->ni_vp); So clearly this check was added intentionally. My question is - why? Is this behavior supposed to be intuitive? The effect of this is that one cannot move a directory (located in a directory that one can write) that one cannot write to another directory that one can write to atomically. You can, however, create a new directory, move the links over (assuming one has read access to the directory), and then remove one's write bit on the directory. You just can't do so atomically. % cd /tmp % mkdir stackoverflow-question % cd stackoverflow-question % mkdir directory-1 % mkdir directory-2 % mkdir directory-1/directory-i-cant-write % echo "foo" > directory-1/directory-i-cant-write/contents % chmod 000 directory-1/directory-i-cant-write/contents % chmod 000 directory-1/directory-i-cant-write % mv directory-1/directory-i-cant-write directory-2 mv: rename directory-1/directory-i-cant-write to directory-2/directory-i-cant-write: Permission denied We now have a directory I can't write with contents I can't read that I can't move atomically. I can, however, achieve the same effect non-atomically by changing permissions, making the new directory, using ln to create the new links, and changing permissions. (Left as an exercise to the reader) . and .. are special cased already, so I don't particularly buy that it is intuitive that if I can't write a directory I can't "change .." which is what the source suggests. Is there any reason for this besides it being the perceived correct behavior by the author of the code? Is there anything bad that can happen if we let people atomically move directories (that they can't write) between directories that they can write?

    Read the article

  • Asp.Net: Open a second browser window with new session id

    - by Daniel Brink
    Right google isn't helping me on this one. I need to open a second browser window or tab, but it must have a different session id. Opening the new browser window from my asp.net page is easy, but then it shares the same cookie and thus session ID with the original. So how can I do this? I need the original browser window to keep its cookies and session and the new browser window to have a new session.

    Read the article

  • Add/remove UILocalNotification based on changes in my settings bundle

    - by Daniel Chui
    I have an app that sends a notification at the same time everyday, reminding the user to enter data into it. However, I want to give the user teh option to disable this as this could get very annoying, so I have an "Enable alerts" in a custom settings bundle. My question is, when the user toggles the switch in the settings bundle, can I add/remove the notifications that are already scheduled without having to enter the app again? note: I'm building and supporting for iOS 4.2.1, and I don't konw why but under "notifications" in the settings app, my app does not appear. I see it on ios 5.x devices though

    Read the article

  • Print out PDF with javascript [closed]

    - by Daniel Abrahamsson
    I have a need to print out multiple PDFs with the help of javascript. Is this even possible without rendering each PDF in a separate window and calling window.print()? Basically, I would like to be able to do something like print('my_pdf_url'). Edit After some searching, I have come to the conclusion that there are no other methods than the one I've described above. It is a far from perfect solution, but it works in simple cases. Edit I ended up merging the PDFs to a monster PDF on the server side and then send this single PDF to the user, who can then choose to print it out.

    Read the article

  • man kaio: No manual entry for kaio.

    - by Daniel
    I trussed a process, and they are lines as below. And I want to know the definition of kaio, but there is no manual entry for kaio, so whether can I get the definition? /1: kaio(AIOWRITE, 259, 0x3805B2A00, 8704, 0x099C9E000755D3C0) = 0 /1: kaio(AIOWRITE, 259, 0x380CF9200, 14336, 0x099CC0000755D5B8) = 0 /1: kaio(AIOWRITE, 259, 0x381573600, 8704, 0x099CF8000755D7B0) = 0 /1: kaio(AIOWRITE, 259, 0x381ACA600, 8192, 0x099D1A000755D9A8) = 0 /1: kaio(AIOWAIT, 0xFFFFFFFF7FFFD620) = 4418032576 /1: timeout: 600.000000 sec /1: kaio(AIOWAIT, 0xFFFFFFFF7FFFD620) = 4418033080 /1: timeout: 600.000000 sec /1: kaio(AIOWAIT, 0xFFFFFFFF7FFFD620) = 4418033584 /1: timeout: 600.000000 sec

    Read the article

  • Problems with ASP.NET, machine-level web.config, and the location element

    - by Daniel Schaffer
    I've got a server running Windows Web Server 2008 R2. The machine-level web.config has the following entries: <location path="Preview"> <appSettings> <add key="Environment" value="Preview" /> </appSettings> </location> <location path="Staging"> <appSettings> <add key="Environment" value="Staging" /> </appSettings> </location> <location path="Production"> <appSettings> <add key="Environment" value="Production" /> </appSettings> </location> I have a website that I'd set up in the direction D:\Sites\Preview\, so the full path would be D:\Sites\Preview\WebSite1. If I put a simple aspx file that just outputs the value of ConfigurationManager.AppSettings["Environment"], it displays the value Preview. I'm not clear on exactly how that works, but it does. I'd set this up several weeks ago, and just now tried to duplicate this - I put a second site in the D:\Sites\Preview\ directory, expecting that it would automatically pick up the appropriate appSettings entries, but for some reason it hasn't - the same aspx page doesn't show anything. Additionally, when I go into the IIS manager and open the Configuration Editor, there are no settings in there, whereas there are settings listed for the first site. Any ideas as to what I could be missing? Is the location element intended to work like this, or did I just find some magical fluke with my first site?

    Read the article

  • What is reading source on an ebook reader like?

    - by Daniel Straight
    There are a few open source projects I would really like to read through the code of to understand better / improve on. The problem is, for me, reading for a long time on the computer screen is tedious. I would love to be able to read code while lounging around and on a screen that was better on my eyes. Has anyone ever tried reading code on an ebook reader? It seems like the e-ink would make it easy on the eyes, plus it would be portable, plus it wouldn't kill any trees. In other words, it sounds perfect, but before I drop a couple benjamins on an ebook reader, I'd like to hear if anyone else has tried this and how it went. It seems Scott Hanselman discussed using the Kindle to read code, but I wouldn't necessarily want a Kindle. Has anyone had a positive experience with some other device? I realize this is not directly about programming, but it relates directly to my ability to improve my skills. I think if a good portable reading device for code exists, it could help a lot of programmers.

    Read the article

  • Visual Basic .NET Help

    - by Daniel
    How can I get this code into a loop? contact.first_name = list.Item(0) contact.middle_name = list.Item(1) contact.last_name = list.Item(2) contact.age = list.Item(3) contact.mobile_phone = list.Item(4) contact.home_phone = list.Item(5) contact.work_phone = list.Item(6) contact.home_street = list.Item(7) contact.home_city = list.Item(8) contact.home_state = list.Item(9) contact.home_zip = list.Item(10) contact.work_street = list.Item(11) contact.work_city = list.Item(12) contact.work_state = list.Item(13) contact.work_zip = list.Item(14)

    Read the article

  • How to implement a countdown clock on a product launch web page?

    - by Daniel Earwicker
    I'm asking this on behalf of a certain corporation: http://www.microsoft.com/visualstudio/en-us/watch-it-live Things to bear in mind: It's 8:30 AM at different times depending on where you are in the world. For example, where I am, it is already 10 AM, whereas in Redmond it's still only 2 AM. That's probably the main thing, I guess. Can any SO users recommend ways to improve the existing countdown page so that it works correctly for users in any timezone? (Serious question - clearly this is a pit that is easy to fall into!)

    Read the article

  • Have an unprivileged non-account user ssh into another box?

    - by Daniel Quinn
    I know how to get a user to ssh into another box with a key: ssh -l targetuser -i path/to/key targethost But what about non-account users like apache? As this user doesn't have a home directory to which it can write a .ssh directory, the whole thing keeps failing with: $ sudo -u apache ssh -o StrictHostKeyChecking=no -l targetuser -i path/to/key targethost Could not create directory '/var/www/.ssh'. Warning: Permanently added '<hostname>' (RSA) to the list of known hosts. Permission denied (publickey). I've tried variations using -o UserKnownHostsFile=/dev/null and setting $HOME to /dev/null and none of these have done the trick. I understand that sudo could probably fix this for me, but I'm trying to avoid having to require a manual server config since this code will be deployed on a number of different environments. Any ideas? Here's a few examples of what I've tried that don't work: $ sudo -u apache export HOME=path/to/apache/writable/dir/ ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=path/to/apache/writable/dir/.ssh/known_hosts -l deploy -i path/to/key targethost $ sudo -u apache ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=path/to/apache/writable/dir/.ssh/known_hosts -l deploy -i path/to/key targethost $ sudo -u apache ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -l deploy -i path/to/key targethost Eventually, I'll be using this solution to run rsync as the apache user.

    Read the article

  • Invalid argument in sendfile() with two regular files

    - by Daniel Hershcovich
    I'm trying to test the sendfile() system call under Linux 2.6.32 to zero-copy data between two regular files. As far as I understand, it should work: ever since 2.6.22, sendfile() has been implemented using splice(), and both the input file and the output file can be either regular files or sockets. The following is the content of sendfile_test.c: #include <sys/sendfile.h> #include <fcntl.h> #include <stdio.h> int main(int argc, char **argv) { int result; int in_file; int out_file; in_file = open(argv[1], O_RDONLY); out_file = open(argv[2], O_WRONLY | O_CREAT | O_TRUNC, 0644); result = sendfile(out_file, in_file, NULL, 1); if (result == -1) perror("sendfile"); close(in_file); close(out_file); return 0; } And when I'm running the following commands: $ gcc sendfile_test.c $ ./a.out infile The output is sendfile: Bad file descriptor Which means that the system call resulted in errno = -EINVAL, I think. What am I doing wrong?

    Read the article

  • Open Office Impress

    - by Daniel Ray
    Hi I have seen that in some question around presentation you suggest using OO Impress for this. I am trying to show multiple presentation in a non fullscreen window, but havent been very successful so far. Ideally I want to be able to move this presentation windows around the screen. I have searched the Open Office forum but the is almost nothing concerning this topic and noone seems to know the answer to my question. Im trying to do this in C#. I would be very thankfull if you can give me some directions, how to do this. Thank you

    Read the article

  • Visual Studio Formatting -- Change Method Color

    - by Daniel
    The default appearance of a method for example, ".ToString()" is by default the color black. I want to make it a different color to stand out but I do not see any options that reference this option specifically. I remember one of former collegues showing me his VS IDE years ago and he had it setup this way but I cannot recall what he did. Does anyone have any ideas on how to do this?

    Read the article

  • SVN Import Force for importing existing file

    - by Daniel A. White
    I am creating a text file and a zip file for a tag automatically with MSBuild. My msbuild project is called by cruisecontrol.net. The text file is always going to be latest.txt and the zip file will be (version).zip (so it will be different every time). I do not want to commit these files back to my trunk, so I discovered svn import. On the first time, it works for both. On successive runs, it fails since latest.txt already exists in the repository. Do I need to use svn import --force or something else to get these two files pushed up to my repository?

    Read the article

  • If/Then in SQL Embedded in VBA

    - by Daniel
    I've got a string like this in my Excel VBA: strSQL = "SELECT * FROM Total WHERE (SimulationID = (" & TextBox1.Text & ") And Test1 = (" & Example & "))" However, sometimes Test will be 'is null', which makes the query And Example = is NULL How can I change it to add an if/then statement or something to make it say And Example is null when Example has a value of "is null"?

    Read the article

  • Server is on or off

    - by Daniel
    Curious. I'm starting to broadcast high school football games online, and it uses a program to broadcast the feeds off my computer. However, when I shut the program down or the computer down, the server goes offline and guests won't be able to access the feeds. Is there any kind of code out there that I can post onto my website that will indicate to my guests whether the server is on or off? I would figure it would be a simple code, a php script or something that periodically checks to see if a site is on line and then displays ON or OFF.

    Read the article

  • Disk-based caching of dynamic images in IIS 7

    - by Daniel Schierbeck
    I'm writing an image server which needs to handle a relatively large number of concurrent requests (~5,000). The images being served are dynamically scaled down and cropped based on per-image specifications, which are queried from a database. The number of images is rather large, so an in-memory cache isn't viable (thrashing would most definitely occur). I'm using native caching in IIS 7 to avoid hitting the ASP.NET app which generates the images on-the-fly. I've looked around, but I couldn't find a simple way to configure IIS to store the cache on-disk -- is there such an option, or would I need to roll my own? I'd rather avoid placing the generated images in a public folder, so they can be served statically, since I would prefer to invalidate the cache entries using a query parameter (last-edit time from the database,) which doesn't seem possible to reconcile with static caching. I would love to get some feedback on this!

    Read the article

  • How to enable i18n from within setup_app in websetup.py ?

    - by daniel
    From within the setup_app function (websetup.py) of a pylons i18n application, which is making use of a db, I was trying to initiate multilingual content to be inserted into the db. To do so the idea was something like: necessary imports here def setup_app(command, conf, vars): .... for lang in langs: set_lang(lang) content=model.Content() content.content=_('content') Session.add(content) Session.commit() Unfortunately it seems that it doesn't work. the set_lang code line is firing an exception as follows: File ".. i18n/translation.py", line 179, in set_lang translator = _get_translator(lang, **kwargs) File ".. i18n/translation.py", line 160, in _get_translator localedir = os.path.join(rootdir, 'i18n') File ".. /posixpath.py", line 67, in join elif path == '' or path.endswith('/'): AttributeError: 'NoneType' object has no attribute 'endswith' Actually I'm even not sure it could be possible launching i18n mechanisms from within this setup_app function without an active request object. Anyone has tried some trick on a similar story ?

    Read the article

  • Rails. Putting update logic in your migrations

    - by Daniel Abrahamsson
    A couple of times I've been in the situation where I've wanted to refactor the design of some model and have ended up putting update logic in migrations. However, as far as I've understood, this is not good practice (especially since you are encouraged to use your schema file for deployment, and not your migrations). How do you deal with these kind of problems? To clearify what I mean, say I have a User model. Since I thought there would only be two kinds of users, namely a "normal" user and an administrator, I chose to use a simple boolean field telling whether the user was an adminstrator or not. However, after I while I figured I needed some third kind of user, perhaps a moderator or something similar. In this case I add a UserType model (and the corresponding migration), and a second migration for removing the "admin" flag from the user table. And here comes the problem. In the "add_user_type_to_users" migration I have to map the admin flag value to a user type. Additionally, in order to do this, the user types have to exist, meaning I can not use the seeds file, but rather create the user types in the migration (also considered bad practice). Here comes some fictional code representing the situation: class CreateUserTypes < ActiveRecord::Migration def self.up create_table :user_types do |t| t.string :name, :nil => false, :unique => true end #Create basic types (can not put in seed, because of future migration dependency) UserType.create!(:name => "BASIC") UserType.create!(:name => "MODERATOR") UserType.create!(:name => "ADMINISTRATOR") end def self.down drop_table :user_types end end class AddTypeIdToUsers < ActiveRecord::Migration def self.up add_column :users, :type_id, :integer #Determine type via the admin flag basic = UserType.find_by_name("BASIC") admin = UserType.find_by_name("ADMINISTRATOR") User.all.each {|u| u.update_attribute(:type_id, (u.admin?) ? admin.id : basic.id)} #Remove the admin flag remove_column :users, :admin #Add foreign key execute "alter table users add constraint fk_user_type_id foreign key (type_id) references user_types (id)" end def self.down #Re-add the admin flag add_column :users, :admin, :boolean, :default => false #Reset the admin flag (this is the problematic update code) admin = UserType.find_by_name("ADMINISTRATOR") execute "update users set admin=true where type_id=#{admin.id}" #Remove foreign key constraint execute "alter table users drop foreign key fk_user_type_id" #Drop the type_id column remove_column :users, :type_id end end As you can see there are two problematic parts. First the row creation part in the first model, which is necessary if I would like to run all migrations in a row, then the "update" part in the second migration that maps the "admin" column to the "type_id" column. Any advice?

    Read the article

  • Solr Multicore Admin Problem

    - by Daniel M
    Im trying to add a url based security constraint to solr deployed in websphere 6.1. If I specify the core name in the url of the constraint then the admin url for that core gives a 404. Has anyone had any success with this or any suggestions? Cheers

    Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >