Search Results

Search found 23576 results on 944 pages for 'case study'.

Page 400/944 | < Previous Page | 396 397 398 399 400 401 402 403 404 405 406 407  | Next Page >

  • Why is (free_space + used_space) != total_size in df? [migrated]

    - by Timothy Jones
    I have a ~2TB ext4 USB external disk which is about half full: $ df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sdc 1922860848 927384456 897800668 51% /media/big I'm wondering why the total size (1922860848) isn't the same as Used+Available (1825185124)? From this answer I see that 5% of the disk might be reserved for root, but that would still only take the total used to 1921328166, which is still off. Is it related to some other filesystem overhead? In case it's relevant, lsof -n | grep deleted shows no deleted files on this disk, and there are no other filesystems mounted inside this one.

    Read the article

  • Straight cable or cross over cable?

    - by om sai
    I have pppoe internet connection. My ISP provides connections like this: ISP->media converter(fiber)->8 port switch(TP Link TL-SF1008D)->to individual internet connection account holders (like me) Now the connection between the media converter and the switch is done using 4 pair cross over cat5 cable and I would like to connect the cable running from the switch to the router and through router to my PC. So what type of cable should I use to make the connection between the switch and the router (straight thru cable or cross over cable)? The point I am trying to make is I am able to connect to the internet using straight through cable between the switch and my PC but when I connect the same cable between the switch and the router and from router to my PC I am not able to connect to the internet. Also, if I am using the 2 pair cable (instead of 4) between the switch and the router I am able to connect to the internet but same is not true in case of 4 pair cat5 cable.

    Read the article

  • Gre tunnel Linux Cisco

    - by mezgani
    I've created a GRE tunnel between LAN A and LAN B. LAN A is behind a router, and LAN B is behind a Linux box and this box has a pppoe interface. When i do tcpdump on Linux box i see that the traffic is routerd to Linux box (tunnel end), so my need is routing the tunnel traffic to internet. I've added these rules to my iptables script, and i stay unable to connect to internet from LAN A Permitting Linux to act as router (necessary to forward packets) echo "1" /proc/sys/net/ipv4/ip_forward iptables -A INPUT -p 47 -j ACCEPT iptables -A FORWARD -i ppp0 -j ACCEPT iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o gre0 -j MASEQUARADE What i've forgot to set in this case?

    Read the article

  • Why my pendrive is showing used space when it is actually empty?

    - by Deb
    I recently got some virus in my pendrive. I removed them using Microsoft security Essential and cleared all data. But it is showing that 47.1MB of space is being used. Is it due to the virus affect? There is no hidden files on the pendrive and I have also set Show hidden files in the Folder and search option. Permission is also granted to everyone. I also use disk management to check any issue but nothing found. I think formatting will solve the the problem but in that case I will not be able to see the data. Is there any command to see the files in cmd or any other way?

    Read the article

  • Windows Recovery Console - forgot password

    - by Jason
    I upgraded to Windows XP SP3, which immediately "broke" the laptop - it never booted with SP3 on it. I put in the Windows XP install disk I had originally used to set up the laptop, and it ran for a while, then said there's no hard disk present, so it can't continue. BIOS still sees the hard disk. I put the hard disk in an external USB case, and I can read/write to it with the other laptop. I then put the hard disk back in it's laptop, restarted with the Windows CD, and tried to get into the Recovery Console, but I forgot the password and can't "log on" to the drive. I'd also like to know if I can fix the broken files (which ones?) from the other laptop (via USB), and if I can "log on" to an external disk with the Recovery Console. (Also, the data won't fit on my other laptop, and I don't have all the install CDs for software on the disk.) Any help appreciated.

    Read the article

  • Computing pixel's screen position in a vertex shader: right or wrong?

    - by cubrman
    I am building a deferred rendering engine and I have a question. The article I took the sample code from suggested computing screen position of the pixel as follows: VertexShaderFunction() { ... output.Position = mul(worldViewProj, input.Position); output.ScreenPosition = output.Position; } PixelShaderFunction() { input.ScreenPosition.xy /= input.ScreenPosition.w; float2 TexCoord = 0.5f * (float2(input.ScreenPosition.x,-input.ScreenPosition.y) + 1); ... } The question is what if I compute the position in the vertex shader (which should optimize the performance as VSF is launched significantly less number of times than PSF) would I get the per-vertex lighting insted. Here is how I want to do this: VertexShaderFunction() { ... output.Position = mul(worldViewProj, input.Position); output.ScreenPosition.xy = output.Position / output.Position.w; } PixelShaderFunction() { float2 TexCoord = 0.5f * (float2(input.ScreenPosition.x,-input.ScreenPosition.y) + 1); ... } What exactly happens with the data I pass from VS to PS? How exactly is it interpolated? Will it give me the right per-pixel result in this case? I tried launching the game both ways and saw no visual difference. Is my assumption right? Thanks. P.S. I am optimizing the point light shader, so I actually pass a sphere geometry into the VS.

    Read the article

  • MySQL - Installation

    - by Stuart Brierley
    In order to create a development environment for a project I am working on, I recently needed to install MySQL Server.  The first step was to download the msi. Running this presents you with the installer splash screen, detailing the version of MySQL that you are about to install - in this case MySQL Server 5.1. Next you can choose whether to install a Typical, Complete or Custom installation.  Although this is the first time I have installed MySQL and the Custom option states "Recommended for advanced users" I opted to carry out a Custom installation, specifically so that I could be sure of what features and components were installed. On the Custom Setup screen you can choose which components to install.  By default the Developer Components are not included, but I opted to include some of these elements. Next up is the ready to install screen and then the intsallation progress.   Following the completion of the installation you are shown a few screens with details of the MySQL Enterprise subscription option. Finally the installation is complete and you are offered the chance to configure and register MySQL. Next I will be looking at the configuration of MySQL Server 5.1.

    Read the article

  • How to start a s3ql script automatically on boot?

    - by ks78
    I've been experimenting with s3ql on Ubuntu 10.04, using it to mount Amazon S3 buckets. However, I'd really like it to mount them automatically. Does anyone know how to do that? I've been working on a script, which works when its run from from the commandline, but for some reason I can't get it to run automatically on boot. Does anyone have any ideas? Here's my script: #! /bin/sh # /etc/init.d/s3ql # ### BEGIN INIT INFO # Provides: s3ql # Required-Start: $remote_fs $syslog # Required-Stop: $remote_fs $syslog # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Start daemon at boot time # Description: Enable service provided by daemon. ### END INIT INFO case "$1" in start) # Redirect stdout and stderr into the system log DIR=$(mktemp -d) mkfifo "$DIR/LOG_FIFO" logger -t s3ql -p local0.info < "$DIR/LOG_FIFO" & exec > "$DIR/LOG_FIFO" exec 2>&1 rm -rf "$DIR" modprobe fuse fsck.s3ql --batch s3://mybucket exec mount.s3ql --allow-other s3://mybucket /mnt/s3fs ;; stop) umount.s3ql /mnt/s3fs ;; *) echo "Usage: /etc/init.d/s3ql{start|stop}" exit 1 ;; esac exit 0

    Read the article

  • securing source code with bitlocker

    - by Daniel Powell
    We need to deploy a web based application at a client site where it will be within their local intranet. Part of our requirement is to provide some basic security to protect our IP. I realise that nothings a 100% guaranteed fix but we are just looking to make it a bit harder for most people. The server will be running server 2008 and I was considering using bitlocker as a cheap and nasty way to protect it. From what I understand assuming the mobo supports it we can use the Transparent bitlocker mode and this means that moving the hdd to another pc will mean the hdd will be unreadable in that machine baring some sort of cold boot attack to steal the encryption keys. Is this assumption correct and in the case that the motherboard or any other component fails in the pc and we need to replace it do we lose access to our data or is there a way to unencrypt it (obviously accessible to only our company) EDIT: we do have legal documents that cover this and we will be locking the pc physically and the client will not have access to the pc (windows login) other than via the website we host on it

    Read the article

  • How does copy protection work?

    - by Yar
    Many programs refuse to go beyond a trial period. Even if they are trashed and then reinstalled, they 'remember' that the trial period has expired. Assuming no contact with a licensing server, what is the general way that most copy protection works? Do programs drop files in random folders on the hard disk that are hard to track down? I know there's no registry on OSX/Linux, but perhaps something similar... ? Or must it be a file/folder? I'm actually not curious from a hacking side but rather from the implementation side, but in any case the question is basically the same.

    Read the article

  • unable to format usb 1204 [daemon inhibited ]

    - by santosamaru
    i try to format my usb 1st time its work all data gone but i can't save any file at this usb . then i try to check is it working or broken here the report santos@santos:~$ sudo badblocks -v /dev/sdb [sudo] password for santos: Sorry, try again. [sudo] password for santos: Checking blocks 0 to 7824383 Checking for bad blocks (read-only test): 0.00% done, 0:00 elapsed. (0/0/0 errdone Pass completed, 0 bad blocks found. (0/0/0 errors) santos@santos:~$ sudo badblocks -v -w /dev/sdb [sudo] password for santos: Sorry, try again. [sudo] password for santos: /dev/sdb is apparently in use by the system; it's not safe to run badblocks! santos@santos:~$ how to format and fix this issues? i have read this link Formatting Pen Drive causes 'Daemon Is Inhibited' Error and it said like this when i try to move any items from desktop " the destination is read only also in this case i use google and find this http://ubuntuforums.org/showthread.php?t=1955353 article as same its not helped following user13509 suggestion ..

    Read the article

  • How to run UNetBootin (or similar) on Linux?

    - by zharvey
    I am trying to install UNetbootin on my Linux Mint (12 - KDE) machine and it will not run. I downloaded the Linux version of it (downloads as a unetbootin-linux-581 file) and set its permission to chmod +x unetbootin-linux-581. I've tried running it every way I can think of: Double-clicking it from the dolphin file manager Running ./unetbootin-linux-581 Running sh ./unetbootin-linux-581 Running unetbootin-linux-581.sh Nothing seems to be working. So I downloaded it on my Linux Ubuntu (12.04) machine, in case UNetbootin doesn't run on Mint for some reason, and am getting the same results. How do I run it, or what do I need to do to be able to run it?!? Thanks in advance!

    Read the article

  • creating proper vpn tunnel, when both LANs have the same addressing

    - by meta
    I was following this tutorial http://wiki.debian.org/OpenVPN#TLS-enabled_VPN and this one http://users.telenet.be/mydotcom/howto/linux/openvpn.htm to create openvpn connection to my remote LAN. But both examples assumed that both LANs have different addresses (ie 192.168.10.0/24 and 192.168.20.0/24, check out this image i.stack.imgur.com/2eUSm.png). Unfortunately in my case both local and remote lan have 192.168.1.0/24 addresses. I am able to connect directly on the openvpn server (I can ping it and log in with ssh), but I can't see other devices on the remote LAN (not mentioning accessing them via browser which was the point from the first place). And don't know if the addressing issue may be the reason of that? If not - how to define routes, so I could ping other devices in remote LAN?

    Read the article

  • Exclude IPs from FQDN Resolution

    - by Jon Rauschenberger
    Is there a way to EXCLUDE IPs on an interface from FQDN resulution? Here's my use case; I have a domain joined Windows Server 2008 R2 machine that hosts multiple Web sites. We ahve DNS A records for the various sites that resolve to different IP addresses. I've added those IPs to the single NIC in the machine and the sites work just fine. The problem is that the FQDN of the machine now resolves any of the IPs on the machine. I only want the primary IP associated with the FQDN on the internal DNS servers. Is there ANY way to accomplish this? jon

    Read the article

  • Other games that employ mechanics like the game "Diplomacy"

    - by Kevin Peno
    I'm doing a little bit of research and I'm hoping you can help me track down any games, other than Diplomacy (online version here), that employ all or some of the mechanics in Diplomacy (rules, short form). Examples I'm looking for: Simultaneous orders given prior to execution of orders In Diplomacy, players "write down" their moves and execute them "at the same time" Support, in terms of supporting an attacker or defender "take" a territory. In Diplomacy, no one unit is stronger than another you need to combine the strength of multiple units to attack other territories. Rules for how move conflicts are resolved Example, 2 units move into a space, but only one is allowed, what happens. I may add to this list later, but these are the primary things I'm looking for. If you need clarification on anything just let me know. Note: I tried asking this on GamingSE, but it was shot down. So, I am unsure where else I could post this. Since I am researching this for game development purposes, I assume this post is on topic. Please let me know if this is not the case. Please also feel free to re-categorize this. Thanks!

    Read the article

  • Connecting Small business network to Azure Site to Site VPN

    - by MarkKGreenway
    Would like to have connectivity between azure virtual machines and on LAN users. My current network has a Cisco ISA550 connected to the WAN (one Ethernet cable into the office the fiber transceiver is on a different floor)and any public servers can be one-to one NAT-ed to have a public and private IP. What is the best way to get a reliable connection. Between end users and the cloud? I want to know the preferred on site endpoint. Do the azure vm's have to have a local ip in the LAN subnet? (Right now 10.10.0.0/20 or 255.255.240.0 to give room if this is the case). If in purchased an asa550 would I put it behind or in front of the isa550. Would it be ahead or peer with the users switches? What is the best way to get a reliable connection. Between end users and the cloud servers?

    Read the article

  • Excel 2010: if( , , "") not treated the same as blank for pivot table group by date

    - by Confused
    I'm trying to group by date in an Excel 2010 pivot table. The column with dates (i.e., the one want to group by), should be the latest date of 2 other columns if neither is null, or blank. i.e., with a formula like: =IF(AND(A4 <> "", B4 <> ""), MAX(A4,B4), "") Normally, this ""in the IF() formula acts the same as an empty cell. In this case, it is preventing me from grouping by date in the Pivot Table. If I filter the date column by (Blanks), then clear the contents of all those cells, then the pivot table does group by date ok. i.e., "" is not being treated the same as an empty cell.

    Read the article

  • Is meta description still relevant?

    - by Jeff Atwood
    I received this bit of advice about the meta description tag recently: Meta descriptions are used by Google probably 80% of the time for the snippet. They don’t help with rankings but you should probably use them. You could just auto generate them from the first part of the question. The description tag exists in the header, like so: <meta name="Description" content="A brief summary of the content on the page."> I'm not sure why we would need this field, as Google seems perfectly capable of showing the relevant search terms in context in the search result pages, like so (I searched for c# list performance): In other words, where would a meta description summary improve these results? We want the page to show context around the actual search hits, not a random summary we inserted! Google Webmaster Central has this advice: For some sites, like news media sources, generating an accurate and unique description for each page is easy: since each article is hand-written, it takes minimal effort to also add a one-sentence description. For larger database-driven sites, like product aggregators, hand-written descriptions are more difficult. In the latter case, though, programmatic generation of the descriptions can be appropriate and is encouraged -- just make sure that your descriptions are not "spammy." Good descriptions are human-readable and diverse, as we talked about in the first point above. The page-specific data we mentioned in the second point is a good candidate for programmatic generation. I'm struggling to think of any scenario when I would want the Google-generated summary, that is, actual context from the page for the search terms, to be replaced by a hard-coded meta description summary of the question itself.

    Read the article

  • Standalone firewall + antivirus or combined security tools?

    - by pukipuki
    For years I'm using some antivirus software and different firewall. Now every antiviruses have got some firewall features and there are complete "internet security" complexes... and every firewall get some antivirus functionality and there are "internet security" versions. Firstly, it is hard and sometimes impossible to install and use standalone AV and FW. Sometimes I can't avoid them (i can't install KAV2010 without removing Outpost firewall etc). Secondly, complex solutions have some disbalance. Farewall from famous antivirus-brand is so user-friendly that is not suitable for me (lack of details in Norton Internet Security for example) and antiviruses from famous firewall-brands are still weak, it is proved by tests. What is today best-practices in case of functionality and security?) Some internet-security complex or two standalone applications from different vendors?

    Read the article

  • Secure external connection to SQL Server (from third party software)

    - by Bart
    I have a SQL Express 2008 R2 server running on a server in an internal lan network. A few databases are used by some third party software to store data. A SQL-Server user is used by this application to connect to the database. Now I need to access this database using a local installation of the software from an external pc. In this particular case a VPN connection is not the solution I am looking for. I have access to an external linux server, so I tried ssh tunneling from the windows server to the linux server and use the external pc to tunnel it back from the linux server to the client, but this is working very very slow. What are my other options to allow this external connection in a safe way?

    Read the article

  • Smart defaults [SSDT]

    - by jamiet
    I’ve just discovered a new, somewhat hidden, feature in SSDT that I didn’t know about and figured it would be worth highlighting here because I’ll bet not many others know it either; the feature is called Smart Defaults. It gets around the problem of adding a NOT NULLable column to an existing table that has got data in it – previous to SSDT you would need to define a DEFAULT constraint however it does feel rather cumbersome to create an object purely for the purpose of pushing through a deployment – that’s the situation that Smart Defaults is meant to alleviate. The Smart Defaults option exists in the advanced section of a Publish Profile file: The description of the setting is “Automatically provides a default value when updating a table that contains data with a column that does not allow null values”, in other words checking that option will cause SSDT to insert an arbitrary default value into your newly created NON NULLable column. In case you’re wondering how it does it, here’s how: SSDT creates a DEFAULT CONSTRAINT at the same time as the column is created and then immediately removes that constraint: ALTER TABLE [dbo].[T1]    ADD [C1] INT NOT NULL,         CONSTRAINT [SD_T1_1df7a5f76cf44bb593506d05ff9a1e2b] DEFAULT 0 FOR [C1];ALTER TABLE [dbo].[T1] DROP CONSTRAINT [SD_T1_1df7a5f76cf44bb593506d05ff9a1e2b]; You can then update the value as appropriate in a Post-Deployment script. Pretty cool! On the downside, you can only specify this option for the whole project, not for an individual table or even an individual column – I’m not sure that I’d want to turn this on for an entire project as it could hide problems that a failed deployment would highlight, in other words smart defaults could be seen to be “papering over the cracks”. If you think that should be improved go and vote (and leave a comment) at [SSDT] Allow us to specify Smart defaults per table or even per column. @Jamiet

    Read the article

  • Cannot log on to a remote server using rdp from windows 7 machine when I am remotley connected to th

    - by Gary
    Bear withe me, here is my set up. I use my 27" iMac 3.06GHz Core 2 Duo 4GB Ram to connect to my work desktop running Windows 7. From there I can administer other remote servers. Here is the problem. Using the Remote Desktop Client on my Mac I can connect to my work machine no problem. But when I then use the work machine to open a remote desktop session with another Windows server (usually SBS 2003 but applies to all) I get the log in prompt, I enter the user name password ensure i'm connecting to the domain, but it wont log me in. The error message is the same, as though I had typed the wrong password (i know this is not the case). Does anyone have a solution? Thanks in advance. Gary

    Read the article

  • Ubuntu issues when moving hard disk to new system

    - by Tim
    I'm working on a legacy project with a small single board computer running Ubuntu 10.04 on a compact flash card. I need to be able to save away a working image (via dd) and copy said image to other compact flash cards for use in other single board computers (with identical hardware) I'm able to copy the image to other flash cards and bootup on other systems no problem. But I'm seeing strange behavior. For instance, I can't use sudo on the new system (“sudo: must be setuid root”). I've gone down the path of trying to fix this, but have run into a slew of other issues. General question is: what do I need to be aware of when moving a hard disk containing Ubuntu (in my case a compact flash card) to another computer? I was hoping it would be seamless to Ubuntu since it's moving to a system with identical hardware. Is there something that needs to be done to make it "portable"?

    Read the article

  • Making sense of S.M.A.R.T

    - by James
    First of all, I think everyone knows that hard drives fail a lot more than the manufacturers would like to admit. Google did a study that indicates that certain raw data attributes that the S.M.A.R.T status of hard drives reports can have a strong correlation with the future failure of the drive. We find, for example, that after their first scan error, drives are 39 times more likely to fail within 60 days than drives with no such errors. First errors in re- allocations, offline reallocations, and probational counts are also strongly correlated to higher failure probabil- ities. Despite those strong correlations, we find that failure prediction models based on SMART parameters alone are likely to be severely limited in their prediction accuracy, given that a large fraction of our failed drives have shown no SMART error signals whatsoever. Seagate seems like it is trying to obscure this information about their drives by claiming that only their software can accurately determine the accurate status of their drive and by the way their software will not tell you the raw data values for the S.M.A.R.T attributes. Western digital has made no such claim to my knowledge but their status reporting tool does not appear to report raw data values either. I've been using HDtune and smartctl from smartmontools in order to gather the raw data values for each attribute. I've found that indeed... I am comparing apples to oranges when it comes to certain attributes. I've found for example that most Seagate drives will report that they have many millions of read errors while western digital 99% of the time shows 0 for read errors. I've also found that Seagate will report many millions of seek errors while Western Digital always seems to report 0. Now for my question. How do I normalize this data? Is Seagate producing millions of errors while Western digital is producing none? Wikipedia's article on S.M.A.R.T status says that manufacturers have different ways of reporting this data. Here is my hypothesis: I think I found a way to normalize (is that the right term?) the data. Seagate drives have an additional attribute that Western Digital drives do not have (Hardware ECC Recovered). When you subtract the Read error count from the ECC Recovered count, you'll probably end up with 0. This seems to be equivalent to Western Digitals reported "Read Error" count. This means that Western Digital only reports read errors that it cannot correct while Seagate counts up all read errors and tells you how many of those it was able to fix. I had a Seagate drive where the ECC Recovered count was less than the Read error count and I noticed that many of my files were becoming corrupt. This is how I came up with my hypothesis. The millions of seek errors that Seagate produces are still a mystery to me. Please confirm or correct my hypothesis if you have additional information. Here is the smart status of my western digital drive just so you can see what I'm talking about: james@ubuntu:~$ sudo smartctl -a /dev/sda smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: WDC WD1001FALS-00E3A0 Serial Number: WD-WCATR0258512 Firmware Version: 05.01D05 User Capacity: 1,000,204,886,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Jun 10 19:52:28 2010 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 179 175 021 Pre-fail Always - 4033 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 270 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 1468 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 262 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 46 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 223 194 Temperature_Celsius 0x0022 105 102 000 Old_age Always - 42 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0

    Read the article

  • Naming conventions: camelCase versus underscore_case ? what are your thoughts about it? [closed]

    - by poelinca
    I've been using underscore_case for about 2 years and I recently switched to camelCase because of the new job (been using the later one for about 2 months and I still think underscore_case is better suited for large projects where there are alot of programmers involved, mainly because the code is easier to read). Now everybody at work uses camelCase because (so they say) the code looks more elegant . What are you're thoughts about camelCase or underscore_case p.s. please excuse my bad english Edit Some update first: platform used is PHP (but I'm not expecting strict PHP platform related answers , anybody can share their thoughts on which would be the best to use , that's why I came here in the first place) I use camelCase just as everibody else in the team (just as most of you recomend) we use Zend Framework which also recommends camelCase Some examples (related to PHP) : Codeigniter framework recommends underscore_case , and honestly the code is easier to read . ZF recomends camelCase and I'm not the only one who thinks ZF code is a tad harder to follow through. So my question would be rephrased: Let's take a case where you have the platform Foo which doesn't recommend any naming conventions and it's the team leader's choice to pick one. You are that team leader, why would you pick camelCase or why underscore_case? p.s. thanks everybody for the prompt answers so far

    Read the article

< Previous Page | 396 397 398 399 400 401 402 403 404 405 406 407  | Next Page >