Search Results

Search found 12093 results on 484 pages for 'partial classes'.

Page 402/484 | < Previous Page | 398 399 400 401 402 403 404 405 406 407 408 409  | Next Page >

• What can cause my code to run slower when the server JIT is activated?

  - by durandai

  I am doing some optimizations on an MPEG decoder. To ensure my optimizations aren't breaking anything I have a test suite that benchmarks the entire codebase (both optimized and original) as well as verifying that they both produce identical results (basically just feeding a couple of different streams through the decoder and crc32 the outputs). When using the "-server" option with the Sun 1.6.0_18, the test suite runs about 12% slower on the optimized version after warmup (in comparison to the default "-client" setting), while the original codebase gains a good boost running about twice as fast as in client mode. While at first this seemed to be simply a warmup issue to me, I added a loop to repeat the entire test suite multiple times. Then execution times become constant for each pass starting at the 3rd iteration of the test, still the optimized version stays 12% slower than in the client mode. I am also pretty sure its not a garbage collection issue, since the code involves absolutely no object allocations after startup. The code consists mainly of some bit manipulation operations (stream decoding) and lots of basic floating math (generating PCM audio). The only JDK classes involved are ByteArrayInputStream (feeds the stream to the test and excluding disk IO from the tests) and CRC32 (to verify the result). I also observed the same behaviour with Sun JDK 1.7.0_b98 (only that ist 15% instead of 12% there). Oh, and the tests were all done on the same machine (single core) with no other applications running (WinXP). While there is some inevitable variation on the measured execution times (using System.nanoTime btw), the variation between different test runs with the same settings never exceeded 2%, usually less than 1% (after warmup), so I conclude the effect is real and not purely induced by the measuring mechanism/machine. Are there any known coding patterns that perform worse on the server JIT? Failing that, what options are available to "peek" under the hood and observe what the JIT is doing there?

  Read the article

• .Net Entity Framework & POCO ... querying full table problem

  - by Chris Klepeis

  I'm attempting to implement a repository pattern with my poco objects auto generated from my edmx. In my repository class, I have: IObjectSet<E> _objectSet; private IObjectSet<E> objectSet { get { if (_objectSet == null) { _objectSet = this._context.CreateObjectSet<E>(); } return _objectSet; } } public IQueryable<E> GetQuery(Func<E, bool> where) { return objectSet.Where(where).AsQueryable<E>(); } public IList<E> SelectAll(Func<E, bool> where) { return GetQuery(where).ToList(); } Where E is the one of my POCO classes. When I trace the database and run this: IList<Contact> c = contactRepository.SelectAll(r => r.emailAddress == "[email protected]"); It shows up in the sql trace as a select for everything in my Contact table. Where am I going wrong here? Is there a better way to do this? Does an objectset not lazy load... so it omitted the where clause? This is the article I read which said to use objectSet's... since with POCO, I do not have EntityObject's to pass into "E" http://devtalk.dk/CommentView,guid,b5d9cad2-e155-423b-b66f-7ec287c5cb06.aspx

  Read the article

• Resolve php endless recursion issue

  - by Matt

  Hey all, I'm currently running into an endless recursion situation. I'm implementing a message service that calls various object methods.. it's quite similar to observer pattern.. Here's whats going on: Dispatcher.php class Dispatcher { ... public function message($name, $method) { // Find the object based on the name $object = $this->findObjectByName($name); // Slight psuedocode.. for ease of example if($this->not_initialized($object)) $object = new $object(); // This is where it locks up. } return $object->$method(); ... } class A { function __construct() { $Dispatcher->message("B", "getName"); } public function getName() { return "Class A"; } } class B { function __construct() { // Assume $Dispatcher is the classes $Dispatcher->message("A", "getName"); } public function getName() { return "Class B"; } } It locks up when neither object is initialized. It just goes back and forth from message each other and no one can be initialized. I'm looking for some kind of queue implementation that will make messages wait for each other.. One where the return values still get set. I'm looking to have as little boilerplate code in class A and class B as possible Any help would be immensely helpful.. Thanks! Matt Mueller

  Read the article

• Spring MessageSource not being used during validation

  - by Jeremy

  I can't get my messages in messages.properties to be used during Spring validation of my form backing objects. app-config.xml: <bean id="messageSource" class="org.springframework.context.support.ResourceBundleMessageSource"> <property name="basename" value="messages" /> </bean> WEB-INF/classes/messages.properties: NotEmpty=This field should not be empty. Form Backing Object: ... @NotEmpty @Size(min=6, max=25) private String password; ... When I loop through all errors in the BindingResult and output the ObjectError's toString I get this: Field error in object 'settingsForm' on field 'password': rejected value []; codes [NotEmpty.settingsForm.password,NotEmpty.password,NotEmpty.java.lang.String,NotEmpty]; arguments [org.springframework.context.support.DefaultMessageSourceResolvable: codes [settingsForm.password,password]; arguments []; default message [password]]; default message [may not be empty] As you can see the default message is "may not be empty" instead of my message "This field should not be empty". I do get my correct message if I inject the messageSource into a controller and output this: messageSource.getMessage("NotEmpty", new Object [] {"password"}, "default empty message", null); So why isn't the validation using my messages.properties? I'm running Spring 3.1.1. Thanks!

  Read the article

• Classloader issue (GWT)

  - by Banang

  I'm currently working on a gwt app, where the server uses a few third party libs. recently I discovered that one of these libs isn't being properly loaded when running my app in deployed mode, and I just can't seem to figure out what out is I'm doing wrong. In my build script I have the following classpath declaration: <path id="project.class.path"> <pathelement location="${war.dir}/WEB-INF/classes"/> <fileset dir="${war.dir}/WEB-INF/lib" includes="**/*.jar"/> </path> and in a later target I copy the jar I need to the right location: <copy todir="${war.dir}/WEB-INF/lib" file="someJar.jar" /> The project builds as it should, without any errors. The jars are copied to where the should be, and are included in the resulting war file. In development mode everything is working as it should, everything gets loaded properly and I hear no complaints. However, in the deployed version I get this thrown at me: java.lang.NoClassDefFoundError: org/apache/commons/lang/exception/NestableRuntimeException java.lang.ClassLoader.defineClass1(Native Method) java.lang.ClassLoader.defineClass(ClassLoader.java:621) java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124) org.apache.catalina.loader.WebappClassLoader.findClassInternal(WebappClassLoader.java:2331) org.apache.catalina.loader.WebappClassLoader.findClass(WebappClassLoader.java:976) org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1451) org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1329) java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320) my.package.server.util.SomeUtils.doSomethingFantastic(SomeUtils.java:84) Line 84 in SomeUtils is trying to instantiate a class from someJar.jar. I know very little about how the class loader for gwt works, and I sure could use a hand. Anyone got any ideas on how to solve this?

  Read the article

• Objective-C and NSURL: where am I supposed to declare receivedData?

  - by jthomas

  I have a two classes, a controller called "AppController" and a class called "URLDelegate" that encapsulates the sample NSURL code from Apple's URL Loading System Programming Guide. The guide repeatedly mentions declaring the receivedData instance variable "elsewhere." I assume this means outside of the URLDelagate class, because if I declare it in the URLDelegate class, my controller class can't "see" the data that has been downloaded. I know that data is received, because in my connectionDidFinishLoading function, I have NSLog display the results: NSLog(@"Succeeded! Received %d bytes of data",[receivedData length]); receivedText=[[NSString alloc] initWithData:receivedData encoding: NSASCIIStringEncoding]; NSLog(@"receivedText=%@",receivedText); So I'm a bit stumped with the following questions: Where should I declare receivedData? My controller class? A third class? Can I just declare it like any normal NSMutableData variable? How do I give my URLDelegate class "access" to this variable? E.g., if I declare receivedData in my AppController class, wouldn't I have to instantiate AppController within URLDelegate? But how would this possible if it's the AppController class which is instantiating the URLDelegate class in the first place? Especially with regard to the last question, I feel like I must be overlooking something blindingly obvious and fundamental. If anyone could point me in the right direction, I would really appreciate it. Thank you!

  Read the article

• C/C++ Control Structure Limitations?

  - by STingRaySC

  I have heard of a limitation in VC++ (not sure which version) on the number of nested if statements (somewhere in the ballpark of 300). The code was of the form: if (a) ... else if (b) ... else if (c) ... ... I was surprised to find out there is a limit to this sort of thing, and that the limit is so small. I'm not looking for comments about coding practice and why to avoid this sort of thing altogether. Here's a list of things that I'd imagine could have some limitation: Number of functions in a scope (global, class, or namespace). Number of expressions in a single statement (e.g., compound conditionals). Number of cases in a switch. Number of parameters to a function. Number of classes in a single hierarchy (either inheritance or containment). What other control structures/language features have limits such as this? Do the language standards say anything about these limits (perhaps minimum requirements for an implementation)? Has anyone run into a particular language limitation like this with a particular compiler/implementation? EDIT: Please note that the above form of if statements is indeed "nested." It is equivalent to: if (a) { //... } else { if (b) { //... } else { if (c) { //... } else { //... } } }

  Read the article

• Delete element from Set

  - by Blitzkr1eg

  Hi. I have 2 classes Tema(Homework) and Disciplina (course), where a Course has a Set of homeworks. In Hibernate i have mapped this to a one-to-many associations like this: <class name="model.Disciplina" table="devgar_scoala.discipline" > <id name="id" > <generator class="increment"/> </id> <set name="listaTeme" table="devgar_scoala.teme"> <key column="Discipline_id" not-null="true" ></key> <one-to-many class="model.Tema" ></one-to-many> </set> </class> <class name="model.Tema" table="devgar_scoala.teme" > <id name="id"> <generator class="increment" /> </id> <property name="titlu" type="string" /> <property name="cerinta" type="binary"> <column name="cerinta" sql-type="blob" /> </property> </class> The problem is that it will add (insert rows in the table 'Teme') but it won't delete any rows and i get no exceptions thrown. Im using the merge() method.

  Read the article

• Hibernate noob fetch join problem

  - by Bruce

  Hi all I have two classes, Test2 and Test3. Test2 has an attribute test3 that is an instance of Test3. In other words, I have a unidirectional OneToOne association, with test2 having a reference to test3. When I select Test2 from the db, I can see that a separate select is being made to get the details of the associated test3 class. This is the famous 1+N selects problem. To fix this to use a single select, I am trying to use the fetch=join annotation, which I understand to be @Fetch(FetchMode.JOIN) However, with fetch set to join, I still see separate selects. Here are the relevant portions of my setup.. hibernate.cfg.xml: <property name="max_fetch_depth">2</property> Test2: public class Test2 { @OneToOne (cascade=CascadeType.ALL , fetch=FetchType.EAGER) @JoinColumn (name="test3_id") @Fetch(FetchMode.JOIN) public Test3 getTest3() { return test3; } NB I set the FetchType to EAGER out of desperation, even though it defaults to EAGER anyway for OneToOne mappings, but it made no difference. Thanks for any help! Edit: I've pretty much given up on trying to use FetchMode.JOIN - can anyone confirm that they have got it to work ie produce a left outer join? In the docs I see that "Usually, the mapping document is not used to customize fetching. Instead, we keep the default behavior, and override it for a particular transaction, using left join fetch in HQL" If I do a left join fetch instead: query = session.createQuery("from Test2 t2 left join fetch t2.test3"); then I do indeed get the results I want - ie a left outer join in the query.

  Read the article

• capture delete key in CListCtrl and do soem processing

  - by user333422

  Hi, I have a class which inherits from CListCtrl class, say class list. I have another class dlg, which inherits from CDialog. Class dlg contains an instance of class list. I have got a delete button in class dlg, on which I delete the selected item in listCtrl and do lots of other processing. I want the same functionality on delete key. I added OnKeyDown() fn is my class list, where I can capture VK_DELETE key. But my problem is that, how do I do otehr processing that I need to do in dialog class. All that processing is dlg class based not list class based. I have many such dlg classes with different data and in every dlg class processing is different. I tried capturing VK_DELETE in dialog class, but it doesn't capture it if focus is on list class. I am totally stuck and have no idea, how to do this. Please give me some idea how i can do this. Thanks, SG

  Read the article

• Problem using Lazy<T> from within a generic abstract class

  - by James Black

  I have a generic class that all my DAO classes derive from, which is defined below. I also have a base class for all my entities, but that is not generic. The method GetIdOrSave is going to be a different type than how I defined SabaAbstractDAO, as I am trying to get the primary key to fulfill the foreign key relationships, so this function goes out to either get the primary key or save the entity and then get the primary key. The last code snippet has a solution on how it will work if I get rid of the generic part, so I think this can be solved by using variance, but I can't figure out how to write an interface that will compile. public abstract class SabaAbstractDAO<T> { ... public K GetIdOrSave<K>(K item, Lazy<SabaAbstractDAO<BaseModel>> lazyitemdao) where K : BaseModel { if (item != null && item.Id.IsNull()) { var itemdao = lazyitemdao.Value; item.Id = itemdao.retrieveID(item); if (item.Id.IsNull()) { return itemdao.SaveData(item); } } return item; } } I am getting this error, when I try to compile: Argument 2: cannot convert from 'System.Lazy<ORNL.HRD.LMS.Dao.SabaCourseDAO>' to 'System.Lazy<ORNL.HRD.LMS.Dao.SabaAbstractDAO<ORNL.HRD.LMS.Models.BaseModel>>' I am trying to call it this way: GetIdOrSave(input.OfferingTemplate, new Lazy<SabaCourseDAO>( () => { return new SabaCourseDAO() { Dao = Dao }; }) ); If I change the definition to this, it works. public K GetIdOrSave<K>(K item, Lazy<SabaCourseDAO> lazyitemdao) where K : BaseModel { So, how can I get this to compile using variance (if needed) and generics, so I can have a very general method that will only work with BaseModel and AbstractDAO<BaseModel>? I expect I should only need to make the change in the method and perhaps abstract class definition, the usage should be fine.

  Read the article

• Auto-implemented getters and setters vs. public fields

  - by tclem

  I see a lot of example code for C# classes that does this: public class Point { public int x { get; set; } public int y { get; set; } } Or, in older code, the same with an explicit private backing value and without the new auto-implemented properties: public class Point { private int _x; private int _y; public int x { get { return _x; } set { _x = value; } } public int y { get { return _y; } set { _y = value; } } } My question is why. Is there any functional difference between doing the above and just making these members public fields, like below? public class Point { public int x; public int y; } To be clear, I understand the value of getters and setters when you need to do some translation of the underlying data. But in cases where you're just passing the values through, it seems needlessly verbose.

  Read the article

• Creating a Ruby method that pads an Array

  - by CJ Johnson

  I'm working on creating a method that pads an array, and accepts 1. a desired value and 2. an optional string/integer value. Desired_size reflects the desired number of elements in the array. If a string/integer is passed in as the second value, this value is used to pad the array with extra elements. I understand there is a 'fill' method that can shortcut this - but that would be cheating for the homework I'm doing. The issue: no matter what I do, only the original array is returned. I started here: class Array def pad(desired_size, value = nil) desired_size >= self.length ? return self : (desired_size - self.length).times.do { |x| self << value } end end test_array = [1, 2, 3] test_array.pad(5) From what I researched the issue seemed to be around trying to alter self's array, so I learned about .inject and gave that a whirl: class Array def pad(desired_size, value = nil) if desired_size >= self.length return self else (desired_size - self.length).times.inject { |array, x| array << value } return array end end end test_array = [1, 2, 3] test_array.pad(5) The interwebs tell me the problem might be with any reference to self so I wiped that out altogether: class Array def pad(desired_size, value = nil) array = [] self.each { |x| array << x } if desired_size >= array.length return array else (desired_size - array.length).times.inject { |array, x| array << value } return array end end end test_array = [1, 2, 3] test_array.pad(5) I'm very new to classes and still trying to learn about them. Maybe I'm not even testing them the right way with my test_array? Otherwise, I think the issue is I get the method to recognize the desired_size value that's being passed in. I don't know where to go next. Any advice would be appreciated. Thanks in advance for your time.

  Read the article

• Set scaleX property on a Sprite without altering the child inside

  - by grammar

  Is this possible? My site is set up with next and prev buttons on the right and left sides respectively, and as you roll over either of the hit areas around the buttons a Sprite fades in which contains a TextField that describes the next page. Said Sprite calls the StartDrag() method, so it follows the mouse within the bounds, which is all fine and dandy on the left side of the page. Adobe, however, seems to have forgotten to put a way to dynamically alter the registration point of a Sprite, MC, whatever else, so when you roll over the right side of the page, the sprite is displayed from the top left and is mostly off the stage. Trying to hack this problem I have tried numerous things ( classes written by others, other hacks) and the best that I have found is to use the scaleX method on the Sprite, changing the scale to -1. This, of course, makes the Sprite seem like it's reflected from its normal point, which means all its children show up backwards. Is there anyway I can use this hack without it altering the text? OR Does anyone know a different way to go about displaying a Sprite from another corner? Any way to make a Sprite fade in and follow the mouse on the LEFT HAND side of the mouse pointer? Thank you very much in advance. Here is a snippet to give an idea of what's happening: naxtPage.labelBG.scaleX = -1; nextPage.labelBG.startDrag( true, nextHitRect ); nextPage.labelBG.x = nextPage.labelBG.parent.mouseX; nextPage.labelBG.y = nextPage.labelBG.parent.mouseY; Cheers

  Read the article

• problem with running Servlet on Tomcat: InvocationTargetException

  - by Fahim

  Hi, I am new to Tomcat, and trying to run a simple HelloWorld servlet. I have installed Tomcat 6, and Jdk1.6 on Mandriva Linux, set CLASSPATH and JAVA_HOME. I have the following files and directories: $CATALINA_HOME/webapps/MyApp/WEB_INF/classes/TestServlet.class $CATALINA_HOME/webapps/MyApp/WEB_INF/web.xml My web.xml file contains the following: http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" version="2.5" <description>ZibJana Localization</description> <display-name>ZibJana Localization</display-name> <!-- Define the servlets for this application--> <servlet> <servlet-name>ZibJana</servlet-name> <servlet-class>TestServlet</servlet-class> </servlet> <servlet-mapping> <servlet-name>ZibJana</servlet-name> <url-pattern>*</url-pattern> </servlet-mapping> But when I try to invoke my servlet with url http://localhost:8080/MyApp, tomcat fails to launch launch the servlet. I checked in the $CATALINA_HOME/logs/catalina.out log-file and found the following error, which occurs every time I start tomcat service. INFO: Deploying web application directory MyApp 16-Mar-2010 12:05:38 AM org.apache.tomcat.util.digester.Digester endElement SEVERE: End event threw exception java.lang.reflect.InvocationTargetException at sun.reflect.GeneratedMethodAccessor18.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) Please let me know where my mistake is. Thanks in advance.

  Read the article

• Sorting out POCO, Repository Pattern, Unit of Work, and ORM

  - by CoffeeAddict

  I'm reading a crapload on all these subjects: POCO Repository Pattern Unit of work Using an ORM mapper ok I see the basic definitions of each in books, etc. but I can't visualize this all together. Meaning an example structure (DL, BL, PL). So what, you have your DL objects that contain your CRUD methods, then your BL objects which are "mapped" using an ORM back to your DL objects? What about DTOs...they're your DL objects right? I'm confused. Can anyone really explain all this together or send me example code? I'm just trying to put this together. I am determining whether to go LINQ to SQL or EF 4 (not sure about NHibrernate yet). Just not getting the concepts as in physical layers and code layers here and what each type of object contains (just properties for DTOs, and CRUDs for your core DL classes that match the table fields???). I just need some guidance here. I'm reading Fowler's books and starting to read Evans but just not all there yet.

  Read the article

• Java swing app can't find image

  - by KáGé

  Hello, I'm making a torpedo game for school in java with swing gui, please see the zipped source HERE. I use custom button icons and mouse cursors of images stored in the /bin/resource/graphics/default folder's subfolders, where the root folder is the program's root folder (it will be the root in the final .jar as well I suppose) which apart from "bin" contains a "main" folder with all the classes. The relative path of the resources is stored in MapStruct.java's shipPath and mapPath variables. Now Battlefield.java's PutPanel class finds them all right and sets up its buttons' icons fine, but every other class fail to get their icons, e.g. Table.java's setCursor, which should set the mouse cursor for all its elements for the selected ship's image or Field.java's this.button.setIcon(icon); in the constructor, which should set the icon for the buttons of the "water". I watched with debug what happens, and the images stay null after loading, though the paths seem to be correct. I've also tried to write a test file in the image folder but the method returns a filenotfound exception. I've tried to get the path of the class to see if it runs from the supposed place and it seems it does, so I really can't find the problem now. Could anyone please help me? Thank you.

  Read the article

• log4net - why would the same MyLog.Debug line not work at one point of startup, but work at another

  - by Greg

  Hi, During startup of my WinForms application I'm noting that there are a couple of points (before the MainForm renders) that do a "MyDataSet.GetInstance()". For the first one the MyLog.Debug line comes through in the VS2008 output window, but for a later one it does work and come through. What could explain this? What settings could I check at debug time to see why an output line for a MyLog.Debug line doesn't come out in the output window? namespace IntranetSync { public class MyDataSet { private static readonly ILog MyLog = LogManager.GetLogger(typeof(MyDataSet)); public static MyDataSet GetInstance() { MyLog.Debug("MyDataSet GetInstance() ====================================="); if (myDataSet == null) { myDataSet = new MyDataSet(); } return myDataSet; } . . . PS. What I have been doing re log4net repository initialization is putting the following line as a private variables in the classes I use logging - is this OK? static class Program { private static readonly ILog MyLog = LogManager.GetLogger(typeof(MainForm)); . . . public class Coordinator { private static readonly ILog MyLog = LogManager.GetLogger(typeof(MainForm)); . . . public class MyDataSet { private static readonly ILog MyLog = LogManager.GetLogger(typeof(MyDataSet)); . . .

  Read the article

• Passing Derived Class Instances as void* to Generic Callbacks in C++

  - by Matthew Iselin

  This is a bit of an involved problem, so I'll do the best I can to explain what's going on. If I miss something, please tell me so I can clarify. We have a callback system where on one side a module or application provides a "Service" and clients can perform actions with this Service (A very rudimentary IPC, basically). For future reference let's say we have some definitions like so: typedef int (*callback)(void*); // This is NOT in our code, but makes explaining easier. installCallback(string serviceName, callback cb); // Really handled by a proper management system sendMessage(string serviceName, void* arg); // arg = value to pass to callback This works fine for basic types such as structs or builtins. We have an MI structure a bit like this: Device <- Disk <- MyDiskProvider class Disk : public virtual Device class MyDiskProvider : public Disk The provider may be anything from a hardware driver to a bit of glue that handles disk images. The point is that classes inherit Disk. We have a "service" which is to be notified of all new Disks in the system, and this is where things unravel: void diskHandler(void *p) { Disk *pDisk = reinterpret_cast<Disk*>(p); // Uh oh! // Remainder is not important } SomeDiskProvider::initialise() { // Probe hardware, whatever... // Tell the disk system we're here! sendMessage("disk-handler", reinterpret_cast<void*>(this)); // Uh oh! } The problem is, SomeDiskProvider inherits Disk, but the callback handler can't receive that type (as the callback function pointer must be generic). Could RTTI and templates help here? Any suggestions would be greatly appreciated.

  Read the article

• UIActivityIndicatorView in a class without a view

  - by Structurer

  Hi I have defined a class that does a lengthy task and I call it from several other classes. Now I want to show an Activity Indicator while this task is doing it's thing, and then remove it once it's done. Since this is just a boring background task, this class doesn't have a view, and I guess that is where I run into my problem. I can't get this thing to show. This is what I have done in my class: UIActivityIndicatorView *activityIndicator = [[UIActivityIndicatorView alloc] initWithFrame:CGRectMake(0.0f, 0.0f, 32.0f, 32.0f)]; [activityIndicator setCenter:CGPointMake(160.0f, 208.0f)]; activityIndicator.activityIndicatorViewStyle = UIActivityIndicatorViewStyleWhite; UIView *contentView = [[UIView alloc]initWithFrame:[[UIScreen mainScreen] applicationFrame]]; [contentView addSubview:activityIndicator]; [activityIndicator startAnimating]; // Do the class lengthy task that takes several seconds..... [contentView release]; [activityIndicator release]; I guess I do something wrong when I get the contentView, but how should I get it properly? Thanks for any advices...

  Read the article

• UIViewController memory management

  - by jAmi

  Hi I have a very basic issue of memory management with my UIViewController (or any other object that I create); The problem is that in Instruments my Object allocation graph is always rising even though I am calling release on then assigning them nil. I have 2 UIViewController sub-classes each initializing with a NIB; I add the first ViewController to the main window like [window addSubView:first.view]; Then in my first ViewController nib file I have a Button which loads the second ViewController like : -(IBAction)loadSecondView{ if(second!=nil){ //second is set as an iVar and @property (nonatomic, retain)ViewController2* sceond; [second release]; second=nil; } second=[[ViewController2* second]initWithNibName:@"ViewController2" bundle:nil]; [self.view addSubView:second.view]; } In my (second) ViewController2 i have a button with an action method -(IBAction) removeSecond{ [self.view removeFromSuperView]; } Please let me know if the above scheme works in a managed way for memory...? In Instruments It does not show release of any allocation and keeps the bar status graph keeps on rising.

  Read the article

• C++ iterators, default initialization and what to use as an uninitialized sentinel.

  - by Hassan Syed

  The Context I have a custom template container class put together from a map and vector. The map resolves a string to an ordinal, and the vector resolves an ordinal (only an initial string to ordinal lookup is done, future references are to the vector) to the entry. The entries are modified intrusively to contain a a bool "assigned" and an iterator_type which is a const_iterator to the container class's map. My container class will use RCF's serialization code (which models boost::serialization) to serialize my container classes to nodes in a network. Serializing iterator's is not possible, or a can of worms, and I can easily regenerate them onces the vectors and maps are serialized on the remote site. The Question I need to default initialize, and be able to test that the iterator has not been assigned to (if it is assigned it is valid, if not it is invalid). Since map iterators are not invalidated upon operations performed on it (unless of course items are removed :D) am I to assume that map<x,y>::end() is a valid sentinel (regardless of the state of the map -- i.e., it could be empty) to initialize to ? I will always have access to the parent map, I'm just unsure wheather end() is the same as the map contents change. I don't want to use another level of indirection (--i.e., boost::optional) to achieve my goal, I'd rather forego compiler checks to correct logic, but it would be nice if I didn't need to. Misc This question exists, but most of its content seems non-sense. Assigning a NULL to an iterator is invalid according to g++ and clang++. This is another similar question, but it focuses on the common use-cases of iterators, which generally tends to be using the iterator to iterate, ofcourse in this use-case the state of the container isn't meant to change whilst iteration is going on.

  Read the article

• WCF service reference namespace differs from original

  - by Thorarin

  I'm having a problem regarding namespaces used by my service references. I have a number of WCF services, say with the namespace MyCompany.Services.MyProduct (the actual namespaces are longer). As part of the product, I'm also providing a sample C# .NET website. This web application uses the namespace MyCompany.MyProduct. During initial development, the service was added as a project reference to the website and uses directly. I used a factory pattern that returns an object instance that implements MyCompany.Services.MyProduct.IMyService. So far, so good. Now I want to change this to use an actual service reference. After adding the reference and typing MyCompany.Services.MyProduct in the namespace textbox, it generates classes in the namespace MyCompany.MyProduct.MyCompany.Services.MyProduct. BAD! I don't want to have to change using directives in several places just because I'm using a proxy class. So I tried prepending the namespace with global::, but that is not accepted. Note that I hadn't even deleted the original assembly references yet, and "reuse types" is enabled, but no reusing was done, apparently. However, I don't want to keep the assembly references around in my sample website for it to work anyway. The only solution I've come up with so far is setting the default namespace for my web application to MyCompany (because it cannot be empty), and adding the service reference as Services.MyProduct. Suppose that a customer wants to use my sample website as a starting point, and they change the default namespace to OtherCompany.Whatever, this will obviously break my workaround. Is there a good solution to this problem? To summarize: I want to generate a service reference proxy in the original namespace, without referencing the assembly. Note: I have seen this question, but there was no solution provided that is acceptable for my use case. Edit: As John Saunders suggested, I've submitted some feedback to Microsoft about this: Feedback item @ Microsoft Connect

  Read the article

• What is wrong with locking non-static fields? What is the correct way to lock a particular instance?

  - by smartcaveman

  Why is it considered bad practice to lock non-static fields? And, if I am not locking non-static fields, then how do I lock an instance method without locking the method on all other instances of the same or derived class? I wrote an example to make my question more clear. public abstract class BaseClass { private readonly object NonStaticLockObject = new object(); private static readonly object StaticLockObject = new object(); protected void DoThreadSafeAction<T>(Action<T> action) where T: BaseClass { var derived = this as T; if(derived == null) { throw new Exception(); } lock(NonStaticLockObject) { action(derived); } } } public class DerivedClass :BaseClass { private readonly Queue<object> _queue; public void Enqueue(object obj) { DoThreadSafeAction<DerivedClass>(x=>x._queue.Enqueue(obj)); } } If I make the lock on the StaticLockObject, then the DoThreadSafeAction method will be locked for all instances of all classes that derive from BaseClass and that is not what I want. I want to make sure that no other threads can call a method on a particular instance of an object while it is locked.

  Read the article

• Third party multipart request in playframework

  - by Brian

  I'm making an application to post photos to yfrog and twitpic and I am having a little trouble figuring out how to set the parameters. Here is my code: public static Result index() { HttpClient httpclient = new DefaultHttpClient(); WSRequestHolder holder = WS.url("http://api.twitpic.com/2/upload.json"); holder.setHeader("Authorization", ""); return async(holder.post("").map(new Function<WS.Response, Result>() { public Result apply(WS.Response response) { return ok(response.getBody()); } })); } Now, I don't expect this to actually get an ok response from the server, as I am just testing the responses that I get back from the server, and that is one that says I need to provide the api key. I figured as much, but I'm not sure of the syntax for providing that parameter, as I need to also give the name of the file and the file. I tried setting holder.post("key=somekey"), with the hope that I would get a different error message (like the key you provided is invalid) but I just get the same error. I'm assuming that I probably need to send it in the for of a multipart request, but I am not very experienced with this kind of request and can't find any play documentation on how to create a multipart request, other than in an html form. Any suggestions and help will be much appreciated. And fyi, I do know that there are yfrog and twitpic java classes to handle this kind of stuff, but I want to do it myself, more so for learning how to do this kind of stuff. Thanks in advance!

  Read the article

< Previous Page | 398 399 400 401 402 403 404 405 406 407 408 409  | Next Page >