Search Results

Search found 48020 results on 1921 pages for 'void return'.

Page 404/1921 | < Previous Page | 400 401 402 403 404 405 406 407 408 409 410 411  | Next Page >

• Decreasing the Height of the PinkMatter Flamingo Ribbon Bar

  - by Geertjan

  The one and only thing prohibiting wide adoption of PinkMatter's amazing Flamingo ribbon bar integration for NetBeans Platform applications (watch the YouTube movie here and follow the tutorial here) is... the amount of real estate taken up by the height of the taskpane: I was Skyping with Bruce Schubert about this and he suggested that a first step might me to remove the application menu. OK, once that had been done there was still a lot of height: But then I configured a bit further and now have this, which is pretty squishy but at least shows there are possibilities: How to get to the above point? Get the PinkMatter Flamingo ribbon bar from java.net (http://java.net/projects/nbribbonbar), which is now the official place where it is found, and then look in the "Flaming Integration" module. There you'll find com.pinkmatter.modules.flamingo.LayerRibbonComponentProvider. Do the following: Comment out "addAppMenu(ribbon);" in "createRibbon()". That's the end of the application menu. Change the "addTaskPanes(JRibbon ribbon)" method from this... private void addTaskPanes(JRibbon ribbon) { RibbonComponentFactory factory = new RibbonComponentFactory(); for (ActionItem item : ActionItems.forPath("Ribbon/TaskPanes")) {// NOI18N ribbon.addTask(factory.createRibbonTask(item)); } } ...to the following: private void addTaskPanes(JRibbon ribbon) { RibbonComponentFactory factory = new RibbonComponentFactory(); for (ActionItem item : ActionItems.forPath("Ribbon/TaskPanes")) { // NOI18N RibbonTask rt = factory.createRibbonTask(item); List<AbstractRibbonBand<?>> bands = rt.getBands(); for (AbstractRibbonBand arb : bands) { arb.setPreferredSize(new Dimension(40,60)); } ribbon.addTask(rt); } } Hurray, you're done. Not a very great result yet, but at least you've made a start in decreasing the height of the PinkMatter Flamingo ribbon bar. If anyone gets further with this, I'd be very happy to hear about it!

  Read the article

• Is 2 lines of push/pop code for each pre-draw-state too many?

  - by Griffin

  I'm trying to simplify vector graphics management in XNA; currently by incorporating state preservation. 2X lines of push/pop code for X states feels like too many, and it just feels wrong to have 2 lines of code that look identical except for one being push() and the other being pop(). The goal is to eradicate this repetitiveness,and I hoped to do so by creating an interface in which a client can give class/struct refs in which he wants restored after the rendering calls. Also note that many beginner-programmers will be using this, so forcing lambda expressions or other advanced C# features to be used in client code is not a good idea. I attempted to accomplish my goal by using Daniel Earwicker's Ptr class: public class Ptr<T> { Func<T> getter; Action<T> setter; public Ptr(Func<T> g, Action<T> s) { getter = g; setter = s; } public T Deref { get { return getter(); } set { setter(value); } } } an extension method: //doesn't work for structs since this is just syntatic sugar public static Ptr<T> GetPtr <T> (this T obj) { return new Ptr<T>( ()=> obj, v=> obj=v ); } and a Push Function: //returns a Pop Action for later calling public static Action Push <T> (ref T structure) where T: struct { T pushedValue = structure; //copies the struct data Ptr<T> p = structure.GetPtr(); return new Action( ()=> {p.Deref = pushedValue;} ); } However this doesn't work as stated in the code. How might I accomplish my goal? Example of code to be refactored: protected override void RenderLocally (GraphicsDevice device) { if (!(bool)isCompiled) {Compile();} //TODO: make sure state settings don't implicitly delete any buffers/resources RasterizerState oldRasterState = device.RasterizerState; DepthFormat oldFormat = device.PresentationParameters.DepthStencilFormat; DepthStencilState oldBufferState = device.DepthStencilState; { //Rendering code } device.RasterizerState = oldRasterState; device.DepthStencilState = oldBufferState; device.PresentationParameters.DepthStencilFormat = oldFormat; }

  Read the article

• Visual Tree Enumeration

  - by codingbloke

  I feel compelled to post this blog because I find I’m repeatedly posting this same code in silverlight and windows-phone-7 answers in Stackoverflow. One common task that we feel we need to do is burrow into the visual tree in a Silverlight or Windows Phone 7 application (actually more recently I found myself doing this in WPF as well).  This allows access to details that aren’t exposed directly by some controls.  A good example of this sort of requirement is found in the “Restoring exact scroll position of a listbox in Windows Phone 7”  question on stackoverflow.  This required that the scroll position of the scroll viewer internal to a listbox be accessed. A caveat One caveat here is that we should seriously challenge the need for this burrowing since it may indicate that there is a design problem.  Burrowing into the visual tree or indeed burrowing out to containing ancestors could represent significant coupling between module boundaries and that generally isn’t a good idea. Why isn’t this idea just not cast aside as a no-no?  Well the whole concept of a “Templated Control”, which are in extensive use in these applications, opens the coupling between the content of the visual tree and the internal code of a control.   For example, I can completely change the appearance and positioning of elements that make up a ComboBox.  The ComboBox control relies on specific template parts having set names of a specified type being present in my template.  Rightly or wrongly this does kind of give license to writing code that has similar coupling. Hasn’t this been done already? Yes it has.  There are number of blogs already out there with similar solutions.  In fact if you are using Silverlight toolkit the VisualTreeExtensions class already provides this feature.  However I prefer my specific code because of the simplicity principle I hold to.  Only write the minimum code necessary to give all the features needed.  In this case I add just two extension methods Ancestors and Descendents, note I don’t bother with “Get” or “Visual” prefixes.  Also I haven’t added Parent or Children methods nor additional “AndSelf” methods because all but Children is achievable with the addition of some other Linq methods.  I decided to give Descendents an additional overload for depth hence a depth of 1 is equivalent to Children but this overload is a little more flexible than simply Children. So here is the code:- VisualTreeEnumeration public static class VisualTreeEnumeration {     public static IEnumerable<DependencyObject> Descendents(this DependencyObject root, int depth)     {         int count = VisualTreeHelper.GetChildrenCount(root);         for (int i = 0; i < count; i++)         {             var child = VisualTreeHelper.GetChild(root, i);             yield return child;             if (depth > 0)             {                 foreach (var descendent in Descendents(child, --depth))                     yield return descendent;             }         }     }     public static IEnumerable<DependencyObject> Descendents(this DependencyObject root)     {         return Descendents(root, Int32.MaxValue);     }     public static IEnumerable<DependencyObject> Ancestors(this DependencyObject root)     {         DependencyObject current = VisualTreeHelper.GetParent(root);         while (current != null)         {             yield return current;             current = VisualTreeHelper.GetParent(current);         }     } }   Usage examples The following are some examples of how to combine the above extension methods with Linq to generate the other axis scenarios that tree traversal code might require. Missing Axis Scenarios var parent = control.Ancestors().Take(1).FirstOrDefault(); var children = control.Descendents(1); var previousSiblings = control.Ancestors().Take(1)     .SelectMany(p => p.Descendents(1).TakeWhile(c => c != control)); var followingSiblings = control.Ancestors().Take(1)     .SelectMany(p => p.Descendents(1).SkipWhile(c => c != control).Skip(1)); var ancestorsAndSelf = Enumerable.Repeat((DependencyObject)control, 1)     .Concat(control.Ancestors()); var descendentsAndSelf = Enumerable.Repeat((DependencyObject)control, 1)     .Concat(control.Descendents()); You might ask why I don’t just include these in the VisualTreeEnumerator.  I don’t on the principle of only including code that is actually needed.  If you find that one or more of the above  is needed in your code then go ahead and create additional methods.  One of the downsides to Extension methods is that they can make finding the method you actually want in intellisense harder. Here are some real world usage scenarios for these methods:- Real World Scenarios //Gets the internal scrollviewer of a ListBox ScrollViewer sv = someListBox.Descendents().OfType<ScrollViewer>().FirstOrDefault(); // Get all text boxes in current UserControl:- var textBoxes = this.Descendents().OfType<TextBox>(); // All UIElement direct children of the layout root grid:- var topLevelElements = LayoutRoot.Descendents(0).OfType<UIElement>(); // Find the containing `ListBoxItem` for a UIElement:- var container = elem.Ancestors().OfType<ListBoxItem>().FirstOrDefault(); // Seek a button with the name "PinkElephants" even if outside of the current Namescope:- var pinkElephantsButton = this.Descendents()     .OfType<Button>()     .FirstOrDefault(b => b.Name == "PinkElephants"); //Clear all checkboxes with the name "Selector" in a Treeview foreach (CheckBox checkBox in elem.Descendents()     .OfType<CheckBox>().Where(c => c.Name == "Selector")) {     checkBox.IsChecked = false; }   The last couple of examples above demonstrate a common requirement of finding controls that have a specific name.  FindName will often not find these controls because they exist in a different namescope. Hope you find this useful, if not I’m just glad to be able to link to this blog in future stackoverflow answers.

  Read the article

• Proportional speed movement between mouse and cube

  - by user1350772

  Hi i´m trying to move a cube with the freeglut mouse "glutMotionFunc(processMouseActiveMotion)" callback, my problem is that the movement is not proportional between the mouse speed movement and the cube movement. MouseButton function: #define MOVE_STEP 0.04 float g_x=0.0f; glutMouseFunc(MouseButton); glutMotionFunc(processMouseActiveMotion); void MouseButton(int button, int state, int x, int y){ if(button == GLUT_LEFT_BUTTON && state== GLUT_DOWN){ initial_x=x; } } When the left button gets clicked the x cordinate is stored in initial_x variable. void processMouseActiveMotion(int x,int y){ if(x>initial_x){ g_x-= MOVE_STEP; }else{ g_x+= MOVE_STEP; } initial_x=x; } When I move the mouse I look in which way it moves comparing the mouse new x coordinate with the initial_x variable, if xinitial_x the cube moves to the right, if not it moves to the left. Any idea how can i move the cube according to the mouse movement speed? Thanks EDIT 1 The idea is that when you click on any point of the screen and you drag to the left/right the cube moves proportionally of the mouse mouvement speed.

  Read the article

• What's the equivalent name of "procedure" in OOP?

  - by AeroCross

  In several of my programming courses in the University, my teachers always told me the following: A function and a procedure are basically the same thing: the only difference is that a function returns a value, and the procedure doesn't. That means that this: function sum($a, $b) { return $a + $b; } ... is a function, and this: function sum($a, $b) { echo $a + $b; } ... is a procedure. In the same train of thought, I've seen that a method is the equivalent of a function in the OOP world. That means that this: class Example { function sum($a, $b) { return $a + $b; } } Is a method — but how do you call this? class Example { function sum($a, $b) { echo $a + $b; } } What's the equivalent name, or how do you call a method that doesn't returns anything?

  Read the article

• Drawing a texture at the end of a trace (crosshair?) UDK

  - by Dave Voyles

  I'm trying to draw a crosshair at the end of my trace. If my crosshair does not hit a pawn or static mesh (ex, just a skybox) then the crosshair stays locked on a certain point at that actor - I want to say its origin. Ex: Run across a pawn, then it turns yellow and stays on that pawn. If it runs across the skybox, then it stays at one point on the box. Weird? How can I get my crosshair to stay consistent? I've included two images for reference, to help illustrate. Note: The wrench is actually my crosshair. The "X" is just a debug crosshair. Ignore that. /// Image 1 /// /// Image 2 /// /*************************************************************************** * Draws the crosshair ***************************************************************************/ function bool CheckCrosshairOnFriendly() { local float CrosshairSize; local vector HitLocation, HitNormal, StartTrace, EndTrace, ScreenPos; local actor HitActor; local MyWeapon W; local Pawn MyPawnOwner; /** Sets the PawnOwner */ MyPawnOwner = Pawn(PlayerOwner.ViewTarget); /** Sets the Weapon */ W = MyWeapon(MyPawnOwner.Weapon); /** If we don't have an owner, then get out of the function */ if ( MyPawnOwner == None ) { return false; } /** If we have a weapon... */ if ( W != None) { /** Values for the trace */ StartTrace = W.InstantFireStartTrace(); EndTrace = StartTrace + W.MaxRange() * vector(PlayerOwner.Rotation); HitActor = MyPawnOwner.Trace(HitLocation, HitNormal, EndTrace, StartTrace, true, vect(0,0,0),, TRACEFLAG_Bullet); DrawDebugLine(StartTrace, EndTrace, 100,100,100,); /** Projection for the crosshair to convert 3d coords into 2d */ ScreenPos = Canvas.Project(HitLocation); /** If we haven't hit any actors... */ if ( Pawn(HitActor) == None ) { HitActor = (HitActor == None) ? None : Pawn(HitActor.Base); } } /** If our trace hits a pawn... */ if ((Pawn(HitActor) == None)) { /** Draws the crosshair for no one - Grey*/ CrosshairSize = 28 * (Canvas.ClipY / 768) * (Canvas.ClipX /1024); Canvas.SetDrawColor(100,100,128,255); Canvas.SetPos(ScreenPos.X - (CrosshairSize * 0.5f), ScreenPos.Y -(CrosshairSize * 0.5f)); Canvas.DrawTile(class'UTHUD'.default.AltHudTexture, CrosshairSize, CrosshairSize, 600, 262, 28, 27); return false; } /** Draws the crosshair for friendlies - Yellow */ CrosshairSize = 28 * (Canvas.ClipY / 768) * (Canvas.ClipX /1024); Canvas.SetDrawColor(255,255,128,255); Canvas.SetPos(ScreenPos.X - (CrosshairSize * 0.5f), ScreenPos.Y -(CrosshairSize * 0.5f)); Canvas.DrawTile(class'UTHUD'.default.AltHudTexture, CrosshairSize, CrosshairSize, 600, 262, 28, 27); return true; }

  Read the article

• WP7&ndash;Samsung Owners Should Hold Off on the Update

  - by D'Arcy Lussier

  Microsoft released an update for WP7 that’s meant to improve updating the devices going forward. They’ve identified a glitch though, specifically with Samsung phones. From Winrumors: A number of Windows Phone 7 users applied the patch on Monday and some Samsung Omnia owners devices have been left in a “bricked” state. Devices simply instruct users to connect them to a PC, hard resetting the device or connecting it to a PC does not appear to solve the issue. Microsoft has also been advising users with broken devices to return them to stores for exchange. The scary thing about this is the resolution: return the “broken” devices to stores for exchange. Many Samsung Focus owners in Canada purchased unlocked phones from the US, and supposedly that act alone voided the warranty. So applying the update has very dire implications for those who might be left with a very pretty brick. I’m going to wait until there are successful installs of the patched update before going ahead with it on my device.

  Read the article

• Have you used the ExecutionValue and ExecValueVariable properties?

  The ExecutionValue execution value property and it’s friend ExecValueVariable are a much undervalued feature of SSIS, and many people I talk to are not even aware of their existence, so I thought I’d try and raise their profile a bit. The ExecutionValue property is defined on the base object Task, so all tasks have it available, but it is up to the task developer to do something useful with it. The basic idea behind it is that it allows the task to return something useful and interesting about what it has performed, in addition to the standard success or failure result. The best example perhaps is the Execute SQL Task which uses the ExecutionValue property to return the number of rows affected by the SQL statement(s). This is a very useful feature, something people often want to capture into a variable, and start using the result set options to do. Unfortunately we cannot read the value of a task property at runtime from within a SSIS package, so the ExecutionValue property on its own is a bit of a let down, but enter the ExecValueVariable and we have the perfect marriage. The ExecValueVariable is another property exposed through the task (TaskHost), which lets us select a SSIS package variable. What happens now is that when the task sets the ExecutionValue, the interesting value is copied into the variable we set on the ExecValueVariable property, and a variable is something we can access and do something with. So put simply if the ExecutionValue property value is of interest, make sure you create yourself a package variable and set the name as the ExecValueVariable. Have  look at the 3 step guide below: 1 Configure your task as normal, for example the Execute SQL Task, which here calls a stored procedure to do some updates. 2 Create variable of a suitable type to match the ExecutionValue, an integer is used to match the result we want to capture, the number of rows. 3 Set the ExecValueVariable for the task, just select the variable we created in step 2. You need to do this in Properties grid for the task (Short-cut key, select the task and press F4) Now when we execute the sample task above, our variable UpdateQueueRowCount will get the number of rows we updated in our Execute SQL Task. I’ve tried to collate a list of tasks that return something useful via the ExecutionValue and ExecValueVariable mechanism, but the documentation isn’t always great. Task ExecutionValue Description Execute SQL Task Returns the number of rows affected by the SQL statement or statements. File System Task Returns the number of successful operations performed by the task. File Watcher Task Returns the full path of the file found Transfer Error Messages Task Returns the number of error messages that have been transferred Transfer Jobs Task Returns the number of jobs that are transferred Transfer Logins Task Returns the number of logins transferred Transfer Master Stored Procedures Task Returns the number of stored procedures transferred Transfer SQL Server Objects Task Returns the number of objects transferred WMI Data Reader Task Returns an object that contains the results of the task. Not exactly clear, but I assume it depends on the WMI query used.

  Read the article

• List has no value after adding values in

  - by Sigh-AniDe

  I am creating a a ghost sprite that will mimic the main sprite after 10 seconds of the game. I am storing the users movements in a List<string> and i am using a foreach loop to run the movements. The problem is when i run through the game by adding breakpoints the movements are being added to the List<string> but when the foreach runs it shows that the list has nothing in it. Why does it do that? How can i fix it? this is what i have: public List<string> ghostMovements = new List<string>(); public void UpdateGhost(float scalingFactor, int[,] map) { // At this foreach, ghostMovements has nothing in it foreach (string s in ghostMovements) { // current position of the ghost on the tiles int mapX = (int)(ghostPostition.X / scalingFactor); int mapY = (int)(ghostPostition.Y / scalingFactor); if (s == "left") { switch (ghostDirection) { case ghostFacingUp: angle = 1.6f; ghostDirection = ghostFacingRight; Program.form.direction = ""; break; case ghostFacingRight: angle = 3.15f; ghostDirection = ghostFacingDown; Program.form.direction = ""; break; case ghostFacingDown: angle = -1.6f; ghostDirection = ghostFacingLeft; Program.form.direction = ""; break; case ghostFacingLeft: angle = 0.0f; ghostDirection = ghostFacingUp; Program.form.direction = ""; break; } } } } // The movement is captured here and added to the list public void captureMovement() { ghostMovements.Add(Program.form.direction); }

  Read the article

• Creating classed in JavaScript

  - by Renso

  Goal:Creating class instances in JavaScript is not available since you define "classes" in js with object literals. In order to create classical classes like you would in c#, ruby, java, etc, with inheritance and instances.Rather than typical class definitions using object literals, js has a constructor function and the NEW operator that will allow you to new-up a class and optionally provide initial properties to initialize the new object with.The new operator changes the function's context and behavior of the return statement.var Person = function(name) {   this.name = name;};   //Init the personvar dude= new Person("renso");//Validate the instanceassert(dude instanceof Person);When a constructor function is called with the new keyword, the context changes from global window to a new and empty context specific to the instance; "this" will refer in this case to the "dude" context.Here is class pattern that you will need to define your own CLASS emulation library:var Class = function() {   var _class = function() {      this.init.apply(this, arguments);   };   _class.prototype.init = function(){};   return _class;}var Person a new Class();Person.prototype.init = function() {};var person = new Person;In order for the class emulator to support adding functions and properties to static classes as well as object instances of People, change the emulator:var Class = function() {   var _class = function() {      this.init.apply(this, arguments);   };   _class.prototype.init = function(){};   _class.fn = _class.prototype;   _class.fn.parent = _class;   //adding class properties   _class.extend = function(obj) {      var extended = obj.extended;      for(var i in obj) {         _class[i] = obj[i];      };      if(extended) extended(_class);   };   //adding new instances   _class.include = function(obj) {      var included = obj.included;      for(var i in obj) {         _class.fn[i] = obj[i];      };      if(included) included(_class);   };   return _class;}Now you can use it to create and extend your own object instances://adding static functions to the class Personvar Person = new Class();Person.extend({   find: function(name) {/*....*/},      delete: function(id) {/*....*/},});//calling static function findvar person = Person.find('renso');   //adding properties and functions to the class' prototype so that they are available on instances of the class Personvar Person = new Class;Person.extend({   save: function(name) {/*....*/},   delete: function(id) {/*....*/}});var dude = new Person;//calling instance functiondude.save('renso');

  Read the article

• Empty interface to combine multiple interfaces

  - by user1109519

  Suppose you have two interfaces: interface Readable { public void read(); } interface Writable { public void write(); } In some cases the implementing objects can only support one of these but in a lot of cases the implementations will support both interfaces. The people who use the interfaces will have to do something like: // can't write to it without explicit casting Readable myObject = new MyObject(); // can't read from it without explicit casting Writable myObject = new MyObject(); // tight coupling to actual implementation MyObject myObject = new MyObject(); None of these options is terribly convenient, even more so when considering that you want this as a method parameter. One solution would be to declare a wrapping interface: interface TheWholeShabam extends Readable, Writable {} But this has one specific problem: all implementations that support both Readable and Writable have to implement TheWholeShabam if they want to be compatible with people using the interface. Even though it offers nothing apart from the guaranteed presence of both interfaces. Is there a clean solution to this problem or should I go for the wrapper interface? UPDATE It is in fact often necessary to have an object that is both readable and writable so simply seperating the concerns in the arguments is not always a clean solution. UPDATE2 (extracted as answer so it's easier to comment on) UPDATE3 Please beware that the primary usecase for this is not streams (although they too must be supported). Streams make a very specific distinction between input and output and there is a clear separation of responsibilities. Rather, think of something like a bytebuffer where you need one object you can write to and read from, one object that has a very specific state attached to it. These objects exist because they are very useful for some things like asynchronous I/O, encodings,...

  Read the article

• Mocking concrete class - Not recommended

  - by Mik378

  I've just read an excerpt of "Growing Object-Oriented Software" book which explains some reasons why mocking concrete class is not recommended. Here some sample code of a unit-test for the MusicCentre class: public class MusicCentreTest { @Test public void startsCdPlayerAtTimeRequested() { final MutableTime scheduledTime = new MutableTime(); CdPlayer player = new CdPlayer() { @Override public void scheduleToStartAt(Time startTime) { scheduledTime.set(startTime); } } MusicCentre centre = new MusicCentre(player); centre.startMediaAt(LATER); assertEquals(LATER, scheduledTime.get()); } } And his first explanation: The problem with this approach is that it leaves the relationship between the objects implicit. I hope we've made clear by now that the intention of Test-Driven Development with Mock Objects is to discover relationships between objects. If I subclass, there's nothing in the domain code to make such a relationship visible, just methods on an object. This makes it harder to see if the service that supports this relationship might be relevant elsewhere and I'll have to do the analysis again next time I work with the class. I can't figure out exactly what he means when he says: This makes it harder to see if the service that supports this relationship might be relevant elsewhere and I'll have to do the analysis again next time I work with the class. I understand that the service corresponds to MusicCentre's method called startMediaAt. What does he mean by "elsewhere"? The complete excerpt is here: http://www.mockobjects.com/2007/04/test-smell-mocking-concrete-classes.html

  Read the article

• MapReduce

  - by kaleidoscope

  MapReduce is a programming model and an associated implementation for processing and generating large data sets. Users specify a map function that processes a key/value pair to generate a set of  intermediate key/value pairs, and a reduce function that merges all intermediate values associated with the same intermediate key. Many real world tasks are expressible in this model, as shown in the paper. Programs written in this functional style are automatically parallelized and executed on a large cluster of commodity machines. The run-time system takes care of the details of partitioning the input data,  scheduling the program's execution across a set of machines, handling machine failures, and managing the required inter-machine communication. This allows programmers without any experience with parallel and distributed systems to easily utilize the resources of a large distributed system. Example: A process to count the appearances of each different word in a set of documents void map(String name, String document):   // name: document name   // document: document contents   for each word w in document:     EmitIntermediate(w, 1); void reduce(String word, Iterator partialCounts):   // word: a word   // partialCounts: a list of aggregated partial counts   int result = 0;   for each pc in partialCounts:     result += ParseInt(pc);   Emit(result); Here, each document is split in words, and each word is counted initially with a "1" value by the Map function, using the word as the result key. The framework puts together all the pairs with the same key and feeds them to the same call to Reduce, thus this function just needs to sum all of its input values to find the total appearances of that word.   Sarang, K

  Read the article

• How to minimize the usage of static variables and objects

  - by Peter Penzov

  I'm trying to implement this JavaFX code where I want to call remote Java class and pass boolean flag: final CheckMenuItem toolbarSubMenuNavigation = new CheckMenuItem("Navigation"); toolbarSubMenuNavigation.setOnAction(new EventHandler<ActionEvent>() { @Override public void handle(ActionEvent e) { //DataTabs.renderTab = toolbarSubMenuNavigation.isSelected(); DataTabs.setRenderTab(toolbarSubMenuNavigation.isSelected()); // call here the getter setter and send boolean flag System.out.println("subsystem1 #1 Enabled!"); } }); Java class which I want to call: public class DataTabs { private static boolean renderTab; // make members *private* private static TabPane tabPane; public static boolean isRenderTab() { return DataTabs.renderTab; } public static void setRenderTab(boolean renderTab) { DataTabs.renderTab = renderTab; tabPane.setVisible(renderTab); } // somewhere below // set visible the tab pane TabPane tabPane = DataTabs.tabPane = new TabPane(); tabPane.setVisible(renderTab); } This implementation works but I want to optimize it to use less static variables and objects. Can you tell me which sections of the code how can be optimized?

  Read the article

• Finding furthermost point in game world

  - by user13414

  I am attempting to find the furthermost point in my game world given the player's current location and a normalized direction vector in screen space. My current algorithm is: convert player world location to screen space multiply the direction vector by a large number (2000) and add it to the player's screen location to get the distant screen location convert the distant screen location to world space create a line running from the player's world location to the distant world location loop over the bounding "walls" (of which there are always 4) of my game world check whether the wall and the line intersect if so, where they intersect is the furthermost point of my game world in the direction of the vector Here it is, more or less, in code: public Vector2 GetFurthermostWorldPoint(Vector2 directionVector) { var screenLocation = entity.WorldPointToScreen(entity.Location); var distantScreenLocation = screenLocation + (directionVector * 2000); var distantWorldLocation = entity.ScreenPointToWorld(distantScreenLocation); var line = new Line(entity.Center, distantWorldLocation); float intersectionDistance; Vector2 intersectionPoint; foreach (var boundingWall in entity.Level.BoundingWalls) { if (boundingWall.Intersects(line, out intersectionDistance, out intersectionPoint)) { return intersectionPoint; } } Debug.Assert(false, "No intersection found!"); return Vector2.Zero; } Now this works, for some definition of "works". I've found that the further out my distant screen location is, the less chance it has of working. When digging into the reasons why, I noticed that calls to Viewport.Unproject could result in wildly varying return values for points that are "far away". I wrote this stupid little "test" to try and understand what was going on: [Fact] public void wtf() { var screenPositions = new Vector2[] { new Vector2(400, 240), new Vector2(400, -2000), }; var viewport = new Viewport(0, 0, 800, 480); var projectionMatrix = Matrix.CreatePerspectiveFieldOfView(MathHelper.PiOver4, viewport.Width / viewport.Height, 1, 200000); var viewMatrix = Matrix.CreateLookAt(new Vector3(400, 630, 600), new Vector3(400, 345, 0), new Vector3(0, 0, 1)); var worldMatrix = Matrix.Identity; foreach (var screenPosition in screenPositions) { var nearPoint = viewport.Unproject(new Vector3(screenPosition, 0), projectionMatrix, viewMatrix, worldMatrix); var farPoint = viewport.Unproject(new Vector3(screenPosition, 1), projectionMatrix, viewMatrix, worldMatrix); Console.WriteLine("For screen position {0}:", screenPosition); Console.WriteLine(" Projected Near Point = {0}", nearPoint.TruncateZ()); Console.WriteLine(" Projected Far Point = {0}", farPoint.TruncateZ()); Console.WriteLine(); } } The output I get on the console is: For screen position {X:400 Y:240}: Projected Near Point = {X:400 Y:629.571 Z:599.0967} Projected Far Point = {X:392.9302 Y:-83074.98 Z:-175627.9} For screen position {X:400 Y:-2000}: Projected Near Point = {X:400 Y:626.079 Z:600.7554} Projected Far Point = {X:390.2068 Y:-767438.6 Z:148564.2} My question is really twofold: what am I doing wrong with the unprojection such that it varies so wildly and, thus, does not allow me to determine the corresponding world point for my distant screen point? is there a better way altogether to determine the furthermost point in world space given a current world space location, and a directional vector in screen space?

  Read the article

• andEngine dynamic sprites

  - by Blucreation

  Ive just started with andEngine the past week and i only started learning java/android 3 weeks. I can use a for loop to add multiple sprites to the screen but when i try to check collisions on them it only does it to one and not the rest. I want to be able to add a specific number for sprites made from the same texture to the scene, add collision detection to them and also make them slide across the screen (im making a game where you avoid the obstacles). My simple code: private void createobstacle(float pX, float pY) { obstacle = new AnimatedSprite(pX, pY, this.mObjTextureRegion.deepCopy(), getVertexBufferObjectManager()); obstacle.setScale(MathUtils.random(0.5f, 3f)); scene.attachChild(obstacle); } private void createobstacle(int num) { for(int i=0; i<=num; i++ ) { final float xPos = MathUtils.random(30.0f, (CAMERA_WIDTH - 30.0f)); final float yPos = MathUtils.random(30.0f, (CAMERA_HEIGHT - 30.0f)); createobstacle(xPos, yPos); } } Ive read about arrays but i cannot find any tutorials about anything im stuck with. Any help would be great!

  Read the article

• OpenGL VertexBuffer won'e render in GLFW3

  - by sm81095

  So I have started to try to learn OpenGL, and I decided to use GLFW to assist in window creation. The problem is, since GLFW3 is so new, there are no tutorials on it yet and how to use it with modern OpenGL (3.3, specifically). Using the GLFW3 tutorial found on the website, which uses older OpenGL rendering (glBegin(GL_TRIANGLES), glVertex3f()), and such, I can get a triangle to render to the screen. The problem is, using new OpenGL, I can't get the same triangle to render to the screen. I am new to OpenGL, and GLFW3 is new to most people, so I may be completely missing something obvious, but here is my code: static const GLuint g_vertex_buffer_data[] = { -1.0f, -1.0f, 0.0f, 1.0f, -1.0f, 0.0f, 0.0f, 1.0f, 0.0f }; int main(void) { GLFWwindow* window; if(!glfwInit()) { fprintf(stderr, "Failed to initialize GLFW."); return -1; } glfwWindowHint(GLFW_SAMPLES, 4); glfwWindowHint(GLFW_CONTEXT_VERSION_MAJOR, 3); glfwWindowHint(GLFW_CONTEXT_VERSION_MINOR, 3); glfwWindowHint(GLFW_OPENGL_FORWARD_COMPAT, GL_TRUE); glfwWindowHint(GLFW_OPENGL_PROFILE, GLFW_OPENGL_CORE_PROFILE); window = glfwCreateWindow(800, 600, "Test Window", NULL, NULL); if(!window) { glfwTerminate(); fprintf(stderr, "Failed to create a GLFW window"); return -1; } glfwMakeContextCurrent(window); glewExperimental = GL_TRUE; GLenum err = glewInit(); if(err != GLEW_OK) { glfwTerminate(); fprintf(stderr, "Failed to initialize GLEW"); fprintf(stderr, (char*)glewGetErrorString(err)); return -1; } GLuint VertexArrayID; glGenVertexArrays(1, &VertexArrayID); glBindVertexArray(VertexArrayID); GLuint programID = LoadShaders("SimpleVertexShader.glsl", "SimpleFragmentShader.glsl"); GLuint vertexBuffer; glGenBuffers(1, &vertexBuffer); glBindBuffer(GL_ARRAY_BUFFER, vertexBuffer); glBufferData(GL_ARRAY_BUFFER, sizeof(g_vertex_buffer_data), g_vertex_buffer_data, GL_STATIC_DRAW); while(!glfwWindowShouldClose(window)) { glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glUseProgram(programID); glEnableVertexAttribArray(0); glBindBuffer(GL_ARRAY_BUFFER, vertexBuffer); glVertexAttribPointer(0, 3, GL_FLOAT, GL_FALSE, 0, (void*)0); glDrawArrays(GL_TRIANGLES, 0, 3); glDisableVertexAttribArray(0); glfwSwapBuffers(window); glfwPollEvents(); } glDeleteBuffers(1, &vertexBuffer); glDeleteProgram(programID); glfwDestroyWindow(window); glfwTerminate(); exit(EXIT_SUCCESS); } I know it is not my shaders, they are super simple and I've checked them against GLFW 2.7 so I know that they work. I'm assuming that I've missed something crucial to using the OpenGL context with GLFW3, so any help locating the problem would be greatly appreciated.

  Read the article

• How can I make a universal construction more efficient?

  - by VF1

  A "universal construction" is a wrapper class for a sequential object that enables it to be linearized (a strong consistency condition for concurrent objects). For instance, here's an adapted wait-free construction, in Java, from [1], which presumes the existence of a wait-free queue that satisfies the interface WFQ (which only requires one-time consensus between threads) and assumes a Sequential interface: public interface WFQ<T> // "FIFO" iteration { int enqueue(T t); // returns the sequence number of t Iterable<T> iterateUntil(int max); // iterates until sequence max } public interface Sequential { // Apply an invocation (method + arguments) // and get a response (return value + state) Response apply(Invocation i); } public interface Factory<T> { T generate(); } // generate new default object public interface Universal extends Sequential {} public class SlowUniversal implements Universal { Factory<? extends Sequential> generator; WFQ<Invocation> wfq = new WFQ<Invocation>(); Universal(Factory<? extends Sequential> g) { generator = g; } public Response apply(Invocation i) { int max = wfq.enqueue(i); Sequential s = generator.generate(); for(Invocation invoc : wfq.iterateUntil(max)) s.apply(invoc); return s.apply(i); } } This implementation isn't very satisfying, however, since it presumes determinism of a Sequential and is really slow. I attempted to add memory recycling: public interface WFQD<T> extends WFQ<T> { T dequeue(int n); } // dequeues only when n is the tail, else assists other threads public interface CopyableSequential extends Sequential { CopyableSequential copy(); } public class RecyclingUniversal implements Universal { WFQD<CopyableSequential> wfqd = new WFQD<CopyableSequential>(); Universal(CopyableSequential init) { wfqd.enqueue(init); } public Response apply(Invocation i) { int max = wfqd.enqueue(i); CopyableSequential cs = null; int ctr = max; for(CopyableSequential csq : wfq.iterateUntil(max)) if(--max == 0) cs = csq.copy(); wfqd.dequeue(max); return cs.apply(i); } } Here are my specific questions regarding the extension: Does my implementation create a linearizable multi-threaded version of a CopyableSequential? Is it possible extend memory recycling without extending the interface (perhaps my new methods trivialize the problem)? My implementation only reduces memory when a thread returns, so can this be strengthened? [1] provided an implementation for WFQ<T>, not WFQD<T> - one does exist, though, correct? [1] Herlihy and Shavit, The Art of Multiprocessor Programming.

  Read the article

• Platform game collisions with Block

  - by Sri Harsha Chilakapati

  I am trying to create a platform game and doing wrong collision detection with the blocks. Here's my code // Variables GTimer jump = new GTimer(1000); boolean onground = true; // The update method public void update(long elapsedTime){ MapView.follow(this); // Add the gravity if (!onground && !jump.active){ setVelocityY(4); } // Jumping if (isPressed(VK_SPACE) && onground){ jump.start(); setVelocityY(-4); onground = false; } if (jump.action(elapsedTime)){ // jump expired jump.stop(); } // Horizontal movement setVelocityX(0); if (isPressed(VK_LEFT)){ setVelocityX(-4); } if (isPressed(VK_RIGHT)){ setVelocityX(4); } } // The collision method public void collision(GObject other){ if (other instanceof Block){ // Determine the horizontal distance between centers float h_dist = Math.abs((other.getX() + other.getWidth()/2) - (getX() + getWidth()/2)); // Now the vertical distance float v_dist = Math.abs((other.getY() + other.getHeight()/2) - (getY() + getHeight()/2)); // If h_dist > v_dist horizontal collision else vertical collision if (h_dist > v_dist){ // Are we moving right? if (getX()<other.getX()){ setX(other.getX()-getWidth()); } // Are we moving left? else if (getX()>other.getX()){ setX(other.getX()+other.getWidth()); } } else { // Are we moving up? if (jump.active){ jump.stop(); } // We are moving down else { setY(other.getY()-getHeight()); setVelocityY(0); onground = true; } } } } The problem is that the object jumps well but does not fall when moved out of platform. Here's an image describing the problem. I know I'm not checking underneath the object but I don't know how. The map is a list of objects and should I have to iterate over all the objects??? Thanks

  Read the article

• Incorrect results for frustum cull

  - by DeadMG

  Previously, I had a problem with my frustum culling producing too optimistic results- that is, including many objects that were not in the view volume. Now I have refactored that code and produced a cull that should be accurate to the actual frustum, instead of an axis-aligned box approximation. The problem is that now it never returns anything to be in the view volume. As the mathematical support library I'm using does not provide plane support functions, I had to code much of this functionality myself, and I'm not really the mathematical type, so it's likely that I've made some silly error somewhere. As follows is the relevant code: class Plane { public: Plane() { r0 = Math::Vector(0,0,0); normal = Math::Vector(0,1,0); } Plane(Math::Vector p1, Math::Vector p2, Math::Vector p3) { r0 = p1; normal = Math::Cross((p2 - p1), (p3 - p1)); } Math::Vector r0; Math::Vector normal; }; This class represents one plane as a point and a normal vector. class Frustum { public: Frustum( const std::array<Math::Vector, 8>& points ) { planes[0] = Plane(points[0], points[1], points[2]); planes[1] = Plane(points[4], points[5], points[6]); planes[2] = Plane(points[0], points[1], points[4]); planes[3] = Plane(points[2], points[3], points[6]); planes[4] = Plane(points[0], points[2], points[4]); planes[5] = Plane(points[1], points[3], points[5]); } Plane planes[6]; }; The points are passed in order where (the inverse of) each bit of the index of each point indicates whether it's the left, top, and back of the frustum, respectively. As such, I just picked any three points where they all shared one bit in common to define the planes. My intersection test is as follows (based on this): bool Intersects(Math::AABB lhs, const Frustum& rhs) const { for(int i = 0; i < 6; i++) { Math::Vector pvertex = lhs.TopRightFurthest; Math::Vector nvertex = lhs.BottomLeftClosest; if (rhs.planes[i].normal.x <= -0.0f) { std::swap(pvertex.x, nvertex.x); } if (rhs.planes[i].normal.y <= -0.0f) { std::swap(pvertex.y, nvertex.y); } if (rhs.planes[i].normal.z <= -0.0f) { std::swap(pvertex.z, nvertex.z); } if (Math::Dot(rhs.planes[i].r0, nvertex) < 0.0f) { return false; } } return true; } Also of note is that because I'm using a left-handed co-ordinate system, I wrote my Cross function to return the negative of the formula given on Wikipedia. Any suggestions as to where I've made a mistake?

  Read the article

• Recasting and Drawing in SDL

  - by user1078123

  I have some code that essentially draws a column on the screen of a wall in a raycasting-type 3d engine. I am trying to optimize it, as it takes about 10 milliseconds do draw a million pixels using this, and the vast majority of game time is spent in this loop. However, I don't quite understand what's occurring, particularly the recasting (I modified the "pixel manipulation" sample code from the SDL documentation). "canvas" is the surface I am drawing to, and "hello" is the surface containing the texture for the column. int c = (curcol)* canvas->format->BytesPerPixel; void *canvaspixels = canvas->pixels; Uint16 texpitch = hello->pitch; int lim = (drawheight +startdraw) * canvpitch +c + (int) canvaspixels; Uint8 *k = (Uint8 *)hello->pixels + (hit)* hello->format->BytesPerPixel; for (int j= (startdraw)*(canvpitch)+c + (int) canvaspixels; (j< lim); j+= canvpitch){ Uint8 *q = (Uint8 *) ((int(h))*(texpitch)+k); *(Uint32 *)j = *(Uint32 *)q; h += s; } We have void pointers (not sure how those are even represented), 8, 16, and 32 bit ints (h and s are floats), all being intermingled, and while it works, it is quite confusing.

  Read the article

• curl can't verify cert using capath, but can with cacert option

  - by phylae

  I am trying to use curl to connect to a site using HTTPS. But curl is failing to verify the SSL cert. $ curl --verbose --capath ./certs/ --head https://example.com/ * About to connect() to example.com port 443 (#0) * Trying 1.1.1.1... connected * Connected to example.com (1.1.1.1) port 443 (#0) * successfully set certificate verify locations: * CAfile: none CApath: ./certs/ * SSLv3, TLS handshake, Client hello (1): * SSLv3, TLS handshake, Server hello (2): * SSLv3, TLS handshake, CERT (11): * SSLv3, TLS alert, Server hello (2): * SSL certificate problem, verify that the CA cert is OK. Details: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed * Closing connection #0 curl: (60) SSL certificate problem, verify that the CA cert is OK. Details: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed More details here: http://curl.haxx.se/docs/sslcerts.html curl performs SSL certificate verification by default, using a "bundle" of Certificate Authority (CA) public keys (CA certs). If the default bundle file isn't adequate, you can specify an alternate file using the --cacert option. If this HTTPS server uses a certificate signed by a CA represented in the bundle, the certificate verification probably failed due to a problem with the certificate (it might be expired, or the name might not match the domain name in the URL). If you'd like to turn off curl's verification of the certificate, use the -k (or --insecure) option. I know about the -k option. But I do actually want to verify the cert. The certs directory has been properly hashed with c_rehash . and it contains: A Verisign intermediate cert Two self-signed certs The above site should be verified with the Verisign intermediate cert. When I use the --cacert option instead (and point directly to the Verisign cert) curl is able to verify the SSL cert. $ curl --verbose --cacert ./certs/verisign-intermediate-ca.crt --head https://example.com/ * About to connect() to example.com port 443 (#0) * Trying 1.1.1.1... connected * Connected to example.com (1.1.1.1) port 443 (#0) * successfully set certificate verify locations: * CAfile: ./certs/verisign-intermediate-ca.crt CApath: /etc/ssl/certs * SSLv3, TLS handshake, Client hello (1): * SSLv3, TLS handshake, Server hello (2): * SSLv3, TLS handshake, CERT (11): * SSLv3, TLS handshake, Server finished (14): * SSLv3, TLS handshake, Client key exchange (16): * SSLv3, TLS change cipher, Client hello (1): * SSLv3, TLS handshake, Finished (20): * SSLv3, TLS change cipher, Client hello (1): * SSLv3, TLS handshake, Finished (20): * SSL connection using RC4-SHA * Server certificate: * subject: C=US; ST=State; L=City; O=Company; OU=ou1; CN=example.com * start date: 2011-04-17 00:00:00 GMT * expire date: 2012-04-15 23:59:59 GMT * common name: example.com (matched) * issuer: C=US; O=VeriSign, Inc.; OU=VeriSign Trust Network; OU=Terms of use at https://www.verisign.com/rpa (c)10; CN=VeriSign Class 3 Secure Server CA - G3 * SSL certificate verify ok. > HEAD / HTTP/1.1 > User-Agent: curl/7.19.7 (x86_64-pc-linux-gnu) libcurl/7.19.7 OpenSSL/0.9.8k zlib/1.2.3.3 libidn/1.15 > Host: example.com > Accept: */* > < HTTP/1.1 404 Not Found HTTP/1.1 404 Not Found < Cache-Control: must-revalidate,no-cache,no-store Cache-Control: must-revalidate,no-cache,no-store < Content-Type: text/html;charset=ISO-8859-1 Content-Type: text/html;charset=ISO-8859-1 < Content-Length: 1267 Content-Length: 1267 < Server: Jetty(7.2.2.v20101205) Server: Jetty(7.2.2.v20101205) < * Connection #0 to host example.com left intact * Closing connection #0 * SSLv3, TLS alert, Client hello (1): In addition, if I try hitting one of the sites using a self signed cert and the --capath option, it also works. (Let me know if I should post an example of that.) This implies that curl is finding the cert directory, and it is properly hash. Finally, I am able to verify the SSL cert with openssl, using its -CApath option. $ openssl s_client -CApath ./certs/ -connect example.com:443 CONNECTED(00000003) depth=3 /C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority verify return:1 depth=2 /C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=(c) 2006 VeriSign, Inc. - For authorized use only/CN=VeriSign Class 3 Public Primary Certification Authority - G5 verify return:1 depth=1 /C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=Terms of use at https://www.verisign.com/rpa (c)10/CN=VeriSign Class 3 Secure Server CA - G3 verify return:1 depth=0 /C=US/ST=State/L=City/O=Company/OU=ou1/CN=example.com verify return:1 --- Certificate chain 0 s:/C=US/ST=State/L=City/O=Company/OU=ou1/CN=example.com i:/C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=Terms of use at https://www.verisign.com/rpa (c)10/CN=VeriSign Class 3 Secure Server CA - G3 --- Server certificate -----BEGIN CERTIFICATE----- <cert removed> -----END CERTIFICATE----- subject=/C=US/ST=State/L=City/O=Company/OU=ou1/CN=example.com issuer=/C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=Terms of use at https://www.verisign.com/rpa (c)10/CN=VeriSign Class 3 Secure Server CA - G3 --- No client certificate CA names sent --- SSL handshake has read 1563 bytes and written 435 bytes --- New, TLSv1/SSLv3, Cipher is RC4-SHA Server public key is 2048 bit Secure Renegotiation IS NOT supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : RC4-SHA Session-ID: D65C4C6D52E183BF1E7543DA6D6A74EDD7D6E98EB7BD4D48450885188B127717 Session-ID-ctx: Master-Key: 253D4A3477FDED5FD1353D16C1F65CFCBFD78276B6DA1A078F19A51E9F79F7DAB4C7C98E5B8F308FC89C777519C887E2 Key-Arg : None Start Time: 1303258052 Timeout : 300 (sec) Verify return code: 0 (ok) --- QUIT DONE How can I get curl to verify this cert using the --capath option?

  Read the article

• Create a thread in xna Update method to find path?

  - by Dan

  I am trying to create a separate thread for my enemy's A* pathfinder which will give me a list of points to get to the player. I have placed the thread in the update method of my enemy. However this seems to cause jittering in the game every-time the thread is called. I have tried calling just the method and this works fine. Is there any way I can sort this out so that I can have the pathfinder on its own thread? Do I need to remove the thread start from the update and start it in the constructor? Is there any way this can work. Here is the code at the moment: bool running = false; bool threadstarted; System.Threading.Thread thread; public void update() { if (running == false && threadstarted == false) { thread = new System.Threading.Thread(PathThread); //thread.Priority = System.Threading.ThreadPriority.Lowest; thread.IsBackground = true; thread.Start(startandendobj); //PathThread(startandendobj); threadstarted = true; } } public void PathThread(object Startandend) { object[] Startandendarray = (object[])Startandend; Point startpoint = (Point)Startandendarray[0]; Point endpoint = (Point)Startandendarray[1]; bool runnable = true; // Path find from 255, 255 to 0,0 on the map foreach(Tile tile in Map) { if(tile.Color == Color.Red) { if (tile.Position.Contains(endpoint)) { runnable = false; } } } if(runnable == true) { running = true; Pathfinder p = new Pathfinder(Map); pathway = p.FindPath(startpoint, endpoint); running = false; threadstarted = false; } }

  Read the article

• Make a flowchart to demonstrate closure behavior

  - by thomas

  I saw below test question the other day in which the author's used a flow chart to represent the logic of loops. And I got to thinking it would be interesting to do this with some more complex logic. For example, the closure in this IIFE sort of boggles me. while (i <= qty_of_gets) { // needs an IIFE (function(i) promise = promise.then(function(){ return $.get("queries/html/" + product_id + i + ".php"); }); }(i++)); } I wonder if seeing a flowchart representation of what happens in it could be more elucidating. Could such a thing be done? Would it be helpful? Or just messy? I haven't the foggiest clue where to start, but thought maybe someone would like to take a stab. Probably all the ajax could go and it could just be a simple return within the IIFE.

  Read the article

• How to make an Actor follow my finger

  - by user48352

  I'm back with another question that may be really simple. I've a texture drawn on my spritebatch and I'm making it move up or down (y-axis only) with Libgdx's Input Handler: touchDown and touchUp. @Override public boolean touchDown(int screenX, int screenY, int pointer, int button) { myWhale.touchDownY = screenY; myWhale.isTouched = true; return true; } @Override public boolean touchUp(int screenX, int screenY, int pointer, int button) { myWhale.isTouched = false; return false; } myWhale is an object from Whale Class where I move my texture position: public void update(float delta) { this.delta = delta; if(isTouched){ dragWhale(); } } public void dragWhale() { if(Gdx.input.getY(0) - touchDownY < 0){ if(Gdx.input.getY(0)<position.y+height/2){ position.y = position.y - velocidad*delta; } } else{ if(Gdx.input.getY(0)>position.y+height/2){ position.y = position.y + velocidad*delta; } } } So the object moves to the center of the position where the person is pressing his/her finger and most of the time it works fine but the object seems to take about half a second to move up or down and sometimes when I press my finger it wont move. Maybe there's another simplier way to do this. I'd highly appreciate if someone points me on the right direction.

  Read the article

< Previous Page | 400 401 402 403 404 405 406 407 408 409 410 411  | Next Page >