Search Results

Search found 41561 results on 1663 pages for 'linux command'.

Page 406/1663 | < Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >

• Having an issue trying to get Gigabit speed across my network (Ubuntu Server)

  - by user94217

  I've just started looking into the network speeds at my office, the entire network is setup to be "Gigabit". This includes Gb switches, Gb Network cards and Cat 5e cabling. I'm not expecting the full speed, I just want more than ~90 Mb/s. I've been running some tests with iperf the linux tools and checking the hardware with ethtool. I have 3 servers and when doing my checks/test I discovered that the two backup servers can access each other at around 450 Mb/s but when using either one of them to connect and test the main server, I only get the 90Mb/s even though ethtool shows the networking card running at 1000/Full. The only difference between all the server/networking cards is the "Port" which ethtool shows. On the two backup servers the "Port" is shown as MII yet on the other it's shown as "Twisted Pair". When using ethtool -s to manually set the "Port" to MII on the main server, it looses all connectivity and does not show "Speed" or "Duplex". Anyway, Am i doing something wrong? Is there a specific reason my main server cannot use Gb when there appears to be no difference except the "Port"?

  Read the article

• Virtual Server HDD shrinks without apparent reason

  - by Christian

  We have a virtual hosted Linux server, and in the last few months every now and then the HDD shrinks from 400GB down to the exact byte count that is in use. All existing data can be downloaded and displayed without a problem, but we can't upload or edit any files because of the "full" hard drive. Here is a screenshot, where "size" should be 400GB: This has happened twice before, and again today. The last times, when I reported the issue to the host, they said "that isn't possible, you must be doing it wrong", but soon after the call, the problem vanished without us doing anything, so I suppose that they have some kind of problem they're not willing to admit. Even after the fact, they acted like nothing was wrong and wrote me a mail in which they explained that I can use "df -h" to view available disk space (well duh, how do you think I noticed this particular issue?). Questions about if and what they had done were ignored. It has happened around the 25th to 28th of the month, so I suspect that they might have a cronjob running every 30 days or so which wreaks havoc with some VM configs. I just want to understand the problem, but the host support hasn't been very helpful in that regard. I have tried Googling the issue, but any combination of search terms I can come up with just gives me tutorials on how to change HDD size in a virtual machine. a) What could be the cause of shrinking HDD size in a Ubuntu 12.04.3 LTS server? Could there be anything in our virtual machine or is it more likely to be an issue with the vm host? b) Can I do anything about it without needing to contact the host's support? c) Is there anyway I can prevent this from happening at all?

  Read the article

• Explain why .bash_logout won't run commands?

  - by Droogans

  So I've been wondering how to run these two lines of code everytime I close an open instance of Terminal: history -c cat /dev/null > ~/.bash_history I export HISTFILE=5 on startup, but still want to flush that out when I'm done. I've tried looking around a bit in a couple of places, and haven't had much luck. I run Linux Mint, and would also note here that I ran into a similar issue with .bash_profile; eventually, I discovered I needed to place all start up code in .bashrc, so maybe that has something to do with it. Here's my .bash_logout file: #!/bin/bash # ~/.bash_logout: executed by bash(1) when login shell exits. # when leaving the console clear the screen to increase privacy if [ "$SHLVL" = 1 ]; then history -c cat /dev/null > ~/.bash_history [ -x /usr/bin/clear_console ] && /usr/bin/clear_console -q fi #this does nothing on exit... echo 'logout'; sleep 2s I've tried re-arranging this script many ways, I'm not sure if I don't understand how bash works, and if any of this is running in the first place. Does the fact that I run Xserver make bash consider Terminal something that isn't a log-out on exit?

  Read the article

• Fedora Core 6 Migration

  - by Matthew Sprankle

  I am at a loss as to what I should to for this server. I need it to run php5.3 and corresponding version of mysql. I received a client today through work that is using Fedora core 6 running 10 very small websites on some very hodge podge setup. My original idea was just upgrade to php5.3. I have yum (installed 3.0.8) reconfigured for the fedora archive. The latest version of php it allows is 5.1.8. I am still relatively new to server setups and am nervous about wiping their server to upgrade it. Since it is about 6-8 years old I'm not sure if it will even support the newest version of fedora. The server specs are: Parallels Plesk Panel version 9.5.4 Operating system Linux 2.6.9-023stab048.4-smp CPU GenuineIntel, Intel(R) Xeon(R)CPU E5335 @ 2.00GHz (10gb disk space and 1gb of memory). I use fedora for my personal server so I was a little familiar with it. I haven't done anything too extravagant. Is there a way I can escape this nightmare with installing php5.3 or do I need to migrate these sites to a new server?

  Read the article

• SSH - SFTP/SCP only + additional command running in background

  - by Chris

  there are many solutions described to get ur SSH-connection forced to only run SFTP by modifying the sshd_config by adding a new group match and give that new group a Forcecommand internal-sftp Well that works great but i would love to have a little more feature. My servers automatically ban IP's which try to connect often in a short time. So when you use any SFTP-Client, which opens multiple connections to work faster it can get banned instandly by the server for a long time. The servers have a script to whitelist users by administrator. I've modified this script to whitelist the user, which runs the script. All i need to do is now get the server to execute that script, when somebody logins. On SSH it's no problem, just put it in .bashrc or something like, but the Forcecommand don't runs these scripts on login. Is there any way to run such a shellscript before or at the same time as the Forcecommand get fired?

  Read the article

• Apache downloads php files instead of running their source

  - by Devils Child

  I have just recently upgraded PHP 5.3 to 5.4 on my Debian Squeeze server. Now, instead of executing PHP files, Apache just downloads them, which is really bad. When I try to follow these steps, I get "broken packages" upon installing the libapache2-mod-php5 package. Also the answer tells me to add something to my httpd.conf, but it's empty. Question: How can I make apache execute php files again, instead of just passing them through as download? dpkg -l | grep php returns this rc libapache2-mod-php5 5.3.3-7+squeeze15 server-side, HTML-embedded scripting language (Apache 2 module) rc php5-cli 5.3.3-7+squeeze15 command-line interpreter for the php5 scripting language ii php5-common 5.4.15-1~dotdeb.2 Common files for packages built from the php5 source rc php5-gd 5.3.3-7+squeeze15 GD module for php5 rc php5-mcrypt 5.3.3-7+squeeze15 MCrypt module for php5 rc php5-mysql 5.3.3-7+squeeze15 MySQL module for php5 rc php5-suhosin 0.9.32.1-1 advanced protection module for php5 rc phpmyadmin 4:3.3.7-7 MySQL web administration tool And apt-get install libapache2-mod-php5 produces this error The following packages have unmet dependencies: libapache2-mod-php5 : Depends: libdb5.1 but it is not installable Depends: libssl1.0.0 (>= 1.0.0) but it is not installable Depends: libxml2 (>= 2.8.0) but 2.7.8.dfsg-2+squeeze7 is to be installed Recommends: php5-cli but it is not going to be installed E: Broken packages

  Read the article

• Tunnell network requests with Windows 7

  - by mark

  I've Windows 7 64bit Pro client in a private LAN behind a Netgear wgr614v7 router. I've also a remote Debian server machine outside. I'd like to tunnel all (or specified ports/protocols) over this outside server, so when I'm on the Windows machine and I request serverfault.com it would not appear from the wgr614v7 public IP but from the server. But it's not only about HTTP traffic, it's basically about everything I'd like to: other TCP ports, even UDP, etc. It must be transparent to the application, e.g. they shouldn't be aware of this. All their requests just appear as being from the server and the tunnel between them takes care about the packets. I'm aware of e.g. Putty and forwarding individual ports or using it as a socks proxy, however not many applications to support this and the support in windows itself looks non-existent to me. I might add it should be something "reasonable" easy to set up. I've heard about PPTP but I'm unsure about it's security implications (by design). Should I go for VPN? There seem to be two common solutions for Linux (OpenSwan and StrongSwan), why would I pick the one over the other? I also fear that setting up a VPN might be quite complex, OTOH maybe it's the only sane way to do the things right? Or is OpenVPN sufficient? I'm seeking for open (source) solutions, what other options to I have or which direction should I head to?

  Read the article

• Adding Command-Line Switches To Windows Shortcuts

  - by jaytea

  Is there a way to, in general, create a Windows shortcut to a file and instruct Windows to pass certain switches to the application before passing the filename? For example: I have an Excel file, abc.xlsx. If I want to create a shortcut to open this file read-only, I would change the target to "C:\Program Files\Microsoft Office\Office12\EXCEL.EXE" /r abc.xlsx, but this fails when another person on my network opens the shortcut and their EXCEL.EXE is not in that same folder. Surely there's a way to tell Windows to pass the /r switch without supplying the path/filename of the application that is supposed to open the file?

  Read the article

• How to prevent response to who-has requests on virtual eth interface?

  - by user42881

  Hi, we use small embedded X86 linux servers equipped with a single physical ethernet port as a gateway for an IP video surveillance application. Each downstream IP cam is mapped to a separate virtual IP address like this: real eth0 IP address= 192.168.1.1, camera 1 (eth0:1) =192.168.1.61, camera 2 (eth0:2) =192.168.1.62, etc. etc. all on the same eth0 physical port. This approach works well, except that a specific third-party windows video recording application running on a separate PC on the same LAN, automatically pings the virtual IPs looking for unique who-has responses on system startup and, when it gets back the same eth0 MAC address for each virtual interface, freaks out and won't allow us to subsequently manually enter those addresses. The windows app doesn't mind, tho, if it receives no answer to the who-has ping. My question - how can we either (a) shut off the who-has responses just for the virtual eth0:x interfaces while keeping them for the primary physical eth0 port, or, in the alternative, spoof a valid but different MAC address for each virtual interface? Thanks!

  Read the article

• How to keep multiple servers in sync file wise?

  - by GForceSys

  I'm currently managing a cluster of PHP-FPM servers, all of which tend to get out of sync with each other. The application that I'm using on top of the app servers (Magento) allows for admins to modify various files on the system, but now that the site is in a clustered set up modifying a file only modifies it on a single instance (on one of the app servers) of the various machines in the cluster. Is there an open-source application for Linux that may allow me to keep all of these servers in sync? I have no problem with creating a small VM instance that can listen for changes from machines to sync. In theory, the perfect application would have small clients that run on each machine to be synced, which would talk to the master server which would then decide how/what to sync from each machine. I have already examined the possibilities of running a centralized file server, but unfortunately my app servers are spread out between EC2 and physical machines, which makes this unfeasible. As there are multiple app servers (some of which are dynamically created depending on the load of the site), simply setting up a rsync cron job is not efficient as the cron job would have to be modified on each machine to send files to every other machine in the cluster, and that would just be a whole bunch of unnecessary data transfers/ssh connections.

  Read the article

• Man command surprisingly accepts arguments ``git diff``

  - by artistoex

  Today, I accidentally typed man git diff which should give no results, as it should, according to the manual, be interpretated as page diff in section git. However, page git-diff(1) is actually shown. How can that be? (Using man 2.5.7 as included in Ubuntu Lucid)

  Read the article

• Very high CPU and low RAM usage - is it possible to place some of swap some of the CPU usage to the RAM (with CloudLinux LVE Manager installed)?

  - by Chriswede

  I had to install CloudLinux so that I could somewhat controle the CPU ussage and more importantly the Concurrent-Connections the Websites use. But as you can see the Server load is way to high and thats why some sites take up to 10 sec. to load! Server load 22.46 (8 CPUs) (!) Memory Used 36.32% (2,959,188 of 8,146,632) (ok) Swap Used 0.01% (132 of 2,104,504) (ok) Server: 8 x Intel(R) Xeon(R) CPU E31230 @ 3.20GHz Memory: 8143680k/9437184k available (2621k kernel code, 234872k reserved, 1403k data, 244k init) Linux Yesterday: Total of 214,514 Page-views (Awstat) Now my question: Can I shift some of the CPU usage to the RAM? Or what else could I do to make the sites run faster (websites are dynamic - so SQL heavy) Thanks top - 06:10:14 up 29 days, 20:37, 1 user, load average: 11.16, 13.19, 12.81 Tasks: 526 total, 1 running, 524 sleeping, 0 stopped, 1 zombie Cpu(s): 42.9%us, 21.4%sy, 0.0%ni, 33.7%id, 1.9%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 8146632k total, 7427632k used, 719000k free, 131020k buffers Swap: 2104504k total, 132k used, 2104372k free, 4506644k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 318421 mysql 15 0 1315m 754m 4964 S 474.9 9.5 95300:17 mysqld 6928 root 10 -5 0 0 0 S 2.0 0.0 90:42.85 kondemand/3 476047 headus 17 0 172m 19m 10m S 1.7 0.2 0:00.05 php 476055 headus 18 0 172m 18m 9.9m S 1.7 0.2 0:00.05 php 476056 headus 15 0 172m 19m 10m S 1.7 0.2 0:00.05 php 476061 headus 18 0 172m 19m 10m S 1.7 0.2 0:00.05 php 6930 root 10 -5 0 0 0 S 1.3 0.0 161:48.12 kondemand/5 6931 root 10 -5 0 0 0 S 1.3 0.0 193:11.74 kondemand/6 476049 headus 17 0 172m 19m 10m S 1.3 0.2 0:00.04 php 476050 headus 15 0 172m 18m 9.9m S 1.3 0.2 0:00.04 php 476057 headus 17 0 172m 18m 9.9m S 1.3 0.2 0:00.04 php 6926 root 10 -5 0 0 0 S 1.0 0.0 90:13.88 kondemand/1 6932 root 10 -5 0 0 0 S 1.0 0.0 247:47.50 kondemand/7 476064 worldof 18 0 172m 19m 10m S 1.0 0.2 0:00.03 php 6927 root 10 -5 0 0 0 S 0.7 0.0 93:52.80 kondemand/2 6929 root 10 -5 0 0 0 S 0.3 0.0 161:54.38 kondemand/4 8459 root 15 0 103m 5576 1268 S 0.3 0.1 54:45.39 lvest

  Read the article

• cisco parse show command

  - by tintifaxx

  I want to write a perl script which logs into cisco switches via telnet and parses the output of show mac-address-table. The problem is that different switches show me a different field layout. The WS-C3548-XL shows the fields in the order Destination Address Address Type VLAN Destination Port while the C2960 shows it like Vlan Mac Address Type Ports is there a way to tell show to print the fields in a predefined order?

  Read the article

• How can I recover my data from a damaged hard drive?

  - by krk

  a few days ago when I was working on windows my laptop was beaten on the side where the hard drive is located. As a result, it was damaged and I couldn't access the windows partition. I had to boot the linux one, which is working without any trouble. I have 2 partition formatted with ntfs, the one with windows on it, and the other one intended to store data. I mounted the windows partition from ubuntu and I could see all my files. But when I tried to mount the data partition it was impossible. It threw me an error, it couldn't recognize ntfs partition. I try to copy the damaged disk into an external hard drive using the command: dd if=/dev/sda of=/dev/sdb conv=noerror,sync The progress stopped at 60%. I was still unable to mount the data partition. Now I'm trying to backup my files using an utility called Photorec. The problem is that it is recovering my files in a disorderly way, it is all mixed up and I need my original directory structure, it will become an endless task to organize the files as they were before. Is there any way I can get my partition back?

  Read the article

• where is my disk space?

  - by user166241

  I recently had a problem with .xsession-errors file - it became very big ( 90GB) and took all disk space: How I can check what takes disk space in /tmp?. I cleaned it with command > .xsession-errors but after an hour it became large again. So I deleted it (rm .xsession-errors) - it helped because it wasn't recreated but again after hour disk space disappeared - now there is no .xsession-errors anymore but I don't know where is the memory: df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 106640456 101223392 4 100% / udev 8166744 8 8166736 1% /dev tmpfs 3270224 972 3269252 1% /run none 5120 0 5120 0% /run/lock none 8175552 152 8175400 1% /run/shm du -sc * .[^.]* | sort -n 0 initrd.img 0 initrd.img.old 0 proc 0 sys 0 vmlinuz 0 vmlinuz.old 4 cdrom 4 lib64 4 media 4 mnt 4 selinux 8 dev 12 srv 16 lost+found 68 tmp 1124 run 3396 lib32 5164 .rpmdb 5540 root 8888 sbin 9120 bin 17132 etc 106080 opt 116956 boot 861908 lib 3530584 usr 3821836 var 13371260 home 21859112 total So there is around 100GB used but executing du -sc * .[^.]* | sort -n in root directory finds only ~21 GB - so what takes 80GB?? How to check it? I suspect that when I deleted the `.xsession-errors' file the errors were redirected somwhere else - but where?

  Read the article

• Using Monit to monitor Resque

  - by Alex

  I'm trying to use resque as a job runner for Rails. I've tried this config, and many other ways of demonizing the rescue task (because running rake resque:work leaves the terminal tied to that command). Unfortunately, their example configuration doesn't work for me. Does the configuration look correct? Or is there another way to turn the process into a daemon? Thank you :) check process resque_worker_QUEUE with pidfile /data/APP_NAME/current/tmp/pids/resque_worker_QUEUE.pid start program = "/bin/sh -c 'cd /data/APP_NAME/current; RAILS_ENV=production QUEUE=queue_name VERBOSE=1 nohup rake environment resque:work& > log/resque_worker_QUEUE.log && echo $! > tmp/pids/resque_worker_QUEUE.pid'" as uid deploy and gid deploy stop program = "/bin/sh -c 'cd /data/APP_NAME/current && kill -s QUIT `cat tmp/pids/resque_worker_QUEUE.pid` && rm -f tmp/pids/resque_worker_QUEUE.pid; exit 0;'" if totalmem is greater than 300 MB for 10 cycles then restart # eating up memory?

  Read the article

• mac replace, what is the unix command?

  - by all-R

  Hi, on Mac, you know there is no 'merge files' when you ctrl+c/ctrl+v some folder on another one, it actually replaces it. I'm simply wondering on what UNIX is this based? because correct me if I'm wrong, but "cp - R" DOES merge files, no? And that's what I'm doing via the Finder, copying some files and folders... thanks!

  Read the article

• TGT validation fails, but only for one user

  - by wzzrd

  I'm seeing the weirdest thing here. I have a couple of RHEL3, 4 and 5 machines that validate user credentials through Kerberos with an Active Directoy domain controller as their KDC. This works for all of my users, save one. There is one account that is unable to log into RHEL3 Linux machines and generates the following errors there: May 31 13:53:19 mybox sshd(pam_unix)[7186]: authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=10.0.0.1 user=user May 31 13:53:20 mybox sshd[7186]: pam_krb5: TGT verification failed for `user' May 31 13:53:20 mybox sshd[7186]: pam_krb5: authentication fails for `user' Other accounts, like my own, are fine: May 31 17:25:30 mybox sshd(pam_unix)[12913]: authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=10.0.0.1 user=myuser May 31 17:25:31 mybox sshd[12913]: pam_krb5: TGT for myuser successfully verified May 31 17:25:31 mybox sshd[12913]: pam_krb5: authentication succeeds for `myuser' May 31 17:25:31 mybox sshd(pam_unix)[12915]: session opened for user myuser by (uid=0) As you can see, TGT validation fails. This only happens for this specific account, not for any other. The failing useraccount's password has been reset, I inspected both user objects in Active Directory, but I see nothing out of the ordinary. If I have the failing useraccount log into a RHEL4 or 5 box, there is not problem, so it must be RHEL3 specific, but the fact that only one account suffers from this, alludes me. Maybe someone has seen this before?

  Read the article

• Finding other computers on network over command line

  - by Jonathan Haddad

  I've got a handful of Macs on my home network, and shell access to only one of them from the outside. How can I figure out what IP address of the other machines are?

  Read the article

• how can a web page change my mouse speed?

  - by Tekaholic

  I usually have many tabs open in Firefox and I haven't been able to find one specific website that causes this because I don't seem to notice it right away. I'm going to click on something on my desktop and I am lifting up the mouse several times to get across the screen. It doesn't seem to matter what program I might be using because this happens on all desktops and in Firefox, too. So I go in my settings and I turn up the mouse speed all the way and it's still not really acceptable. It doesn't matter if I click on different tabs but when I close the browser, my mouse is way too sensitive, like I'd expect at the max setting. Then I go back to Control Center and return my mouse speed and acceleration to normal. When I restart my browser, the mouse remains normal. So is there something to this before I start wasting my time hunting through my history to discover which website or sites are having this effect? ...and if it is a specific site and I locate it, what can I change to stop it's effect on my mouse besides not visiting it? I am using Linux Mint 13 on a box with an AMD Athlon processor and 2gigs of ram. I never installed another browser because everything works for me.

  Read the article

• Passive mode FTP file download hangs from specific machine

  - by chiptuned

  I have a server which is an AWS instance that just cannot download files from a specific FTP server. I can connect to the FTP server fine and run some commands, but when I request a file it just hangs. Here is the debug output of the base linux ftp client after login: ---> SYST 215 UNIX Type: Apache FtpServer Remote system type is UNIX. ftp> get outgoing/catalog.gz catalog.gz local: catalog.gz remote: outgoing/catalog.gz ---> PASV 227 Entering Passive Mode (64,156,167,125,135,191) ---> RETR outgoing/catalog.gz 150 File status okay; about to open data connection. Thats it. Then it just sits there and nothing transfers. I have verified that a data connection is made but the client gets no data. ? ss -nt dst 64.156.167.125 State Recv-Q Send-Q Local Address:Port Peer Address:Port ESTAB 0 0 10.185.147.150:41190 64.156.167.125:21 ESTAB 0 0 10.185.147.150:48871 64.156.167.125:48557 The FTP server is not in my control and downloads from other FTP servers in passive mode have worked. Active mode does not work as the system is behind a firewall. Every FTP client I've tried has the same problem. The download works from other systems, even from other AWS instances I have with the same Security Group. Not necessarily the same distro or config though. I understand it may be some issue on the server side, but I want to know what it is about my particular machine where the transfer hangs and where on every other machine I can get my hands on, it works. Please let me know what the culprit on the client side could be or ideas on what else to look at.

  Read the article

• MAC-Address based routing

  - by d-fens

  Here is what i want to do: I have a bunch of systems, some might have the same Public-IP, i disable ARP. I have a Firewall (either IP Layer or bridge-FW) between these systems and the internet. Depending on the destination port of incoming IP-Packets to some of these Public-IPs i want to set the destinsation-Ethernet-Adress. So for instance System A has IP 8.8.8.8, mac de:ad:be:ef:de:ad, arp disabled System B has IP 8.8.8.8, mac 1f:1f:1f:1f:1f:1f, arp disabled Firewall has IP 8.8.8.1, arp disabled on that interface Incoming packet to IP 8.8.8.8 tcp dest port 100 Incoming packet to IP 8.8.8.8 tcp dest port 101 Firewall sets dest-mac for 1.) - de:ad:be:ef:de:ad Firewall sets dest-mac for 2.) - 1f:1f:1f:1f:1f:1f Second scenario: System A and System B establish outgoing TCP-Connections, and the firewall matches the dst-mac of the incoming IP-Packets (response packets) to the senders-mac address. is this possible in any way with linux and iptables? edit: i read ebtables might "work" in a hackish way for this purpose but i am not sure...

  Read the article

• My Ubuntu 10.04 server kills all WAN bandwidth when it's attached to my LAN. Where do you begin troubleshooting?

  - by rrc7cz

  First I should say that my Linux knowledge is minimal; just enough to set up some servers (Apache, Tomcat, Couch, etc). I built a MiniITX server to host some simple sites, act as an SSH tunnel while I'm away, and act as a torrent server. It was not properly secured for a long time (iptables was empty, all ports open, no firewall) though my router did not have much port forwarding set up beyond HTTP, FTP, and SSH. A week or two ago my bandwidth at home dropped from around 27Mbps to 2Mbps and my upload went from 7Mbps to 0.06Mbps. When I unplug the server from the LAN, by bandwidth shoots back up. I threw up a restrictive iptables, removed most of the port forwarding, and checked my router logs to see if there were any open connections from the server (malware?) but there were none. What would you do? What are the first things you'd check? I can of course reinstall everything from scratch, but I'd like to find the root cause.

  Read the article

• Global Email Forwarding with EXIM?

  - by Dexirian

  Been trying to find a solution to this for a while without success so here i go : I was given the task to build a High-Availability Load-Balanced Network Cluster for our 2 linux servers. I did some workaround and managed to get a DNS + SQL + Web Folders + Mails synchronisation going between both. Now i would like my server 2 to only do mailing and server 1 to only do web hosting. I transfered all the accounts for 1 to 2 using the WHM built-in account transfert feature. I created 2 different rsync jobs that sync, update, and delete the files for mail and websites. Now i was able to successfully transfer 1 mail accounts from 1 to 2, and the server 2 works flawlessly. All i had to do was change the MX entries to point to the new server and bingo. Now my problem is, some clients have their mail softwares configured so that they point to oldserver.domain.com. I cant make the (A) entry of oldserver.domain.com point to the new server for obvious reasons. I thought of using .foward files and add them to the home directories of the concerned users but that would be very difficult. So my question is : Is there a way to configure exim so that it will only foward mails to the new server? I need to change all the users so they use their mail on server 2 without them doing anything. Thanks! EDIT : TO CLARIFY MY PROBLEM Some clients have their mail point to oldserver.xyz instead of mail.olderserver.xyz I want to know if i can do something to prevent modifying the clients configuration I would also like to know is there is a way to find out what clients aren't properly configured

  Read the article

• Raspberry Pi how to format HDD

  - by Speed

  Hi I am very new to Raspberry Pi environment, so looking for a bit of help to format a usb hard disk drive. I ran lsblk and got sda 8:0 0 37.3G 0 disk sda1 8:1 0 37.3G 0 part looking on web, if tried the following "sudo mkfs.ext4 /dev/sda1 -L USB40gb" it did something but when I tried to mount the drive again, it still showed the files that were there before and I can not create new file/folder "Error creating directory: Permission denied" I am writing this from my windows 8.1 pc so can not cut and paste from the pi. trying to format its output is a bit hard. Oh, there is Nothing written after the word "part" above. There use to be /media/USB40gb so I have done something because this has disappeared. I am using PCManFM 0.9.10 It does not have a format option, which would make life a lot easier, but then its not windows. I think I am running the basic linux os for the pi. It boots to a graphic environment, but I do not know how to advise what it is. I think its OpenBox 2.0.4 Thanks in advance Speed PS: I reran the format string above but this time I changed the label to read USB37gb. I did this to confirm that I was in fact formatting the right drive. Low and behold, it actually formatted the drive, wiping everything from it. Great ... testing it by creating a new folder on the drive and get error msg Permission Denied! So I have fixed the formatting issue by trial and error but still can't use the drive... Suggestions anyone?

  Read the article

< Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >