Search Results

Search found 25974 results on 1039 pages for 'source routing'.

Page 406/1039 | < Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >

• 2 routers, both DHCP, no IP assigned

  - by piobyz

  I can't get DHCP to assign IP to my wireless devices. My network config is as follows: Nanostation5 Linksys WRT350N, which is connected with Nanostation via its INTERNET port. Nanostation: LAN IP Address: 192.168.1.20 WLAN IP Address: 192.168.0.79 Network Mode: Router and is getting its IP via DHCP from my ISP Netmask: 255.255.255.0 Gateway IP: 192.168.1.1 LAN Network settings: IP Address: 192.168.1.20 Netmask: 255.255.255.0 Enable NAT: YES ENABLE DHCP Server: YES Range 192.168.1.100 ~ 250 Netmask: 255.255.255.0 Enable DNS Proxy: YES Linksys: Internet Connection Type: DHCP Router IP: 192.168.2.1 Subnet Mask: 255.255.255.0 DHCP: Enabled Start IP: 192.168.2.100 ~ 120 Advanced Routing: NAT: Enabled What I can do is connecting manually with this config: IP: 192.168.2.101 Subnet Mask: 255.255.255.0 Router: 192.168.2.1 DNS: 192.168.1.20 Search domains: WRT350N I want to be able to connect to both routers independently(now its 192.168.1.20 for Nanostation, and 192.168.2.1 for Linksys) and connect any wireless device using DHCP. What should be IP ranges, masks, etc. on both devices?

  Read the article

• MSSQLSERVER Will Not Start - Event ID 913 and 1814

  - by ThaKidd

  Hello ServerFault! I need some serious help. I have a major database server down and am scratching my head at how to fix it. The server was hit by rolling black outs last week in Dallas and sense then, Microsoft SQL 2005 SP2 will not start up. I am getting the following errors (both when starting the service and while trying to execute mssqlsrv.exe -c -f -m: Event Type: Error Event Source: MSSQLSERVER Event ID: 913 Could not find database ID 3. Database may not be activated yet or may be in transition. Reissue the query once the database is available. If you do not think this error is due to a database that is transitioning its state and this error continues to occur, contact your primary support provider. Please have available for review the Microsoft SQL Server error log and any additional information relevant to the circumstances when the error occurred. and... Event Type: Information Event Source: MSSQLSERVER Event ID: 1814 Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in the event log that may indicate why the tempdb files could not be initialized. I have tried to rename the tempdb.mdf to tempdb.old with no success. I have checked and have 193 GB of free hard drive space. What else might cause this problem? Could the server need a chkdsk ran on it or do I need to be looking at some area of the database server? Any help is greatly appreciated. Thank you in advance.

  Read the article

• Permanent Routes Centos Questions

  - by user65053

  So with a little help I figured out how to setup these routes and I can set them in rc.local route add -net 208.82.236.0 netmask 255.255.255.0 dev ppp0 metric 1 route add -net 208.82.236.0 netmask 255.255.255.0 dev eth0 metric 10 my question is being that the first route is ppp0 as soon as I disconnect the modem the route is dropped how do I maintain the route or make it permanent so that next time the modem connects it will follow the route. Currently after ppp0 disconnects the route is dropped netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface laxapx03.o1.com * 255.255.255.255 UH 0 0 0 ppp0 208.82.236.0 * 255.255.255.0 U 0 0 0 eth0 10.0.1.0 * 255.255.255.0 U 0 0 0 eth0 169.254.0.0 * 255.255.0.0 U 0 0 0 eth0 default 10.0.1.1 0.0.0.0 UG 0 0 0 eth0

  Read the article

• FreeBSD slow transfers - RFC 1323 scaling issue?

  - by Trey

  I think I may be having an issue with window scaling (RFC 1323) and am hoping that someone can enlighten me on what's going on. Server: FreeBSD 9, apache22, serving a static 100MB zip file. 192.168.18.30 Client: Mac OS X 10.6, Firefox 192.168.17.47 Network: Only a switch between them - the subnet is 192.168.16/22 (In this test, I also have dummynet filtering simulating an 80ms ping time on all IP traffic. I've seen nearly identical traces with a "real" setup, with real internet traffic/latency also) Questions: Does this look normal? Is packet #2 specifying a window size of 65535 and a scale of 512? Is packet #5 then shrinking the window size so it can use the 512 scale and still keep the overall calculated window size near 64K? Why is the window scale so high? Here are the first 6 packets from wireshark. For packets 5 and 6 I've included the details showing the window size and scaling factor being used for the data transfer. Code: No. Time Source Destination Protocol Length Info 108 6.699922 192.168.17.47 192.168.18.30 TCP 78 49190 http [SYN] Seq=0 Win=65535 Len=0 MSS=1460 WS=8 TSval=945617489 TSecr=0 SACK_PERM=1 115 6.781971 192.168.18.30 192.168.17.47 TCP 74 http 49190 [SYN, ACK] Seq=0 Ack=1 Win=65535 Len=0 MSS=1460 WS=512 SACK_PERM=1 TSval=2617517338 TSecr=945617489 116 6.782218 192.168.17.47 192.168.18.30 TCP 66 49190 http [ACK] Seq=1 Ack=1 Win=524280 Len=0 TSval=945617490 TSecr=2617517338 117 6.782220 192.168.17.47 192.168.18.30 HTTP 490 GET /utils/speedtest/large.file.zip HTTP/1.1 118 6.867070 192.168.18.30 192.168.17.47 TCP 375 [TCP segment of a reassembled PDU] Details: Transmission Control Protocol, Src Port: http (80), Dst Port: 49190 (49190), Seq: 1, Ack: 425, Len: 309 Source port: http (80) Destination port: 49190 (49190) [Stream index: 4] Sequence number: 1 (relative sequence number) [Next sequence number: 310 (relative sequence number)] Acknowledgement number: 425 (relative ack number) Header length: 32 bytes Flags: 0x018 (PSH, ACK) Window size value: 130 [Calculated window size: 66560] [Window size scaling factor: 512] Checksum: 0xd182 [validation disabled] Options: (12 bytes) No-Operation (NOP) No-Operation (NOP) Timestamps: TSval 2617517423, TSecr 945617490 [SEQ/ACK analysis] TCP segment data (309 bytes) Note: originally posted http://forums.freebsd.org/showthread.php?t=32552

  Read the article

• ISA Server dropping packets as it believes they are spoofed

  - by RB

  We have ISA Server 2004 running on Windows Server 2003 SP2. It has 2 NICs - one internal called LAN on 192.168.16.2, with a subnet of 255.255.255.0, and one external called WAN on 93.x.x.2. The default gateway is 93.x.x.1 (our modem). This machine also accepts VPN connections. We are having a problem with a scanner, which is trying to save a scan into a network share. Every time we try to scan, ISA Server logs the following Denied Connection Log type: Firewall service Status: A packet was dropped because ISA Server determined that the source IP address is spoofed. Rule: Source: Internal ( 192.168.16.54:1024) Destination: Internal ( 192.168.16.255:137) Protocol: NetBios Name Service Pinging 192.168.16.54 from the ISA Server works fine. In ISA Server, going into Configuration → Networks, there are 5 Networks : - External (inbuilt) - Internal (defined as 192.168.16.0 → 192.168.16.255) - Local Host (inbuilt) - Quarantined VPN Clients (inbuilt) - VPN Clients (inbuilt) Finally, under Network Connections → Advanced → Advanced Settings..., the connections are in the following order : - LAN - WAN - [Remote Access Connections] If we try to scan onto a workstation it works fine. Please let me know if you need any more info - many thanks. RB.

  Read the article

• CryptSvc not matched by Windows 7 Firewall rule

  - by theultramage

  I am using Windows Firewall in conjunction with a third-party tool to get notified about new outbound connection attempts (Windows Firewall Notifier or Windows Firewall Control). The way these tools do it is by setting the firewall to deny by default, and to add an auditing policy to log blocked connections into the Security event log. Then they watch the log, and display notification about newly added entries. netsh advfirewall set allprofiles firewallpolicy blockinbound,blockoutbound auditpol /set /subcategory:{0CCE9226-69AE-11D9-BED3-505054503030} /failure:enable With this configuration in place, I now need to craft outbound allow rules for applications and system services. Here is the rule for CryptSvc, the service frequently used for certificate validation and revocation checking: netsh advfirewall firewall add rule name="Windows Cryptographic Services" action=allow enable=yes profile=any program="%SystemRoot%\system32\svchost.exe" service="CryptSvc" dir=out protocol=tcp remoteport=80,443 The problem is, this rule does not work. Unless I change the scope to "all programs and services" (which is really unhealthy), connection denied events like the following will keep appearing in the security log: Event 5157, Microsoft Windows security auditing. The Windows Filtering Platform has blocked a connection. Application Information: Process ID: 1476 (<- svchost.exe with CryptSvc and nothing else) Application Name: \device\harddiskvolume1\windows\system32\svchost.exe Network Information: Direction: Outbound Source Address: 192.168.0.1 Source Port: 49616 Destination Address: 2.16.52.16 Destination Port: 80 Protocol: 6 (<- TCP) To make sure it's CryptSvc, I have let the connection through and reviewed its traffic; I also configured CryptSvc to run in its own svchost instance to make it more obvious: ;sc config CryptSvc type= share sc config CryptSvc type= own So... why is it not matching the firewall rule, and how to fix that?

  Read the article

• IIS7 - how to place application in a folder inside application web site

  - by Nir

  I have a static web site with a blog (an asp.net application), the blog is in a subdirectory of the web site so: example.com/, example.com/Something.htm, example.com/folder/somefile.htm, etc. - are all static files example.com/blog, example.com/blog/categories.aspx, example.com/blog/2011/11/09/post-name.aspx, etc. - all go to the blog app I'm upgrading the static part of the web site to a dynamic site (also an asp.net application) and the blog is incompatible with the new app (the app needs handlers and modules loaded in web.config that don't work with the blog) Also, I have to keep all the old URLs the same - so I can't move the blog to a subdomain or the new app to a folder and the blog generates links based on its folder so clever redirection tricks wouldn't work. Is there a way to place an asp.net application in a folder inside another application (either as a real or virtual folder) so that the root web.config settings don't apply to the application folder? Or some other trick I didn't think of? The system is running IIS7 on Windows Server 2008 64bit, I have full control over the server's configuration. I can't modify the blog's source code but I can edit its web.config and other configuration. I can modify the source of the new application but I can't make it compatible with the blog (most of its usefulness comes from a 3rd party library that is not compatible with the blog). The blog in an asp.net 3.5 webforms application The new root application is an asp.net 4.0 mvc application

  Read the article

• Unable to logon using terminal server connection

  - by satch

  I have several W2K3 SP2 servers, admin TS enabled. I discovered this morning, I was unable to logon into some of them. I've a couple of Citrix servers in different farms, a SAP (IA64) app server and a cvs server. All of them show same sympthoms; remote connections are refused. I've been able to logon locally, and terminal server service is up, there are no users (so connections are not depleted). There are no errors in log in most servers. One of the Citrix ones, reported following errors: Event ID 50 Source TermDD Type Error Description The RDP protocol component X.224 detected an error in the protocol stream and has disconnected the client. and Event ID 1006 Source TermService Type Error Description The terminal server received large number of incomplete connections. The system may be under attack. Anyway, I suppose these errors appear because server isn't working, and Citrix users try to logon massively. (I nmap'ed server and port seems up). I've solved this problem rebooting before, but with so many servers affected it seems like a crappy workaround. Any idea about troubleshooting it properly? Thanks in advance

  Read the article

• svnsync loses revision properties although hook installed

  - by roesslerj

  Hello all! I have a pretty weird problem. We have setup an SVN-Mirror via cronjob (because it needs to go from inside to outside of a firewall, so no post-commit-hook possible) and svnsync. We installed a pre-revprop-hook just as told. Everything seems to work fine, except that it doesn't. E.g. when manually executing the script. # svnsync --non-interactive sync file://<path-to-mirror> --source-username <usr> --source-password <pwd> Committed revision 19817. Copied properties for revision 19817. No error, no complaints. But if checking for the revision properties it says: # svnlook info <path-to-mirror> 0 # svn info -r HEAD file://<path-to-mirror> 2>&1 Path: <root-of-mirror> URL: file://<path-to-mirror> Repository Root: file://<path-to-mirror> Repository UUID: <uid> Revision: 19817 Node Kind: directory Last Changed Rev: 19817 So somehow the author and timestamp information gets lost. But we need that information for our internal processes. Since no error or warning is produced I have absolutely no idea even where to start to look. Everything is local (except for the remote master), so there are no server-logs to look at. I also tried to manually recopy via svnsync copy-revprops (http://chestofbooks.com/computers/revision-control/subversion-svn/svnsync-Copy-revprops-Ref-svnsync-C-Copy-revprops.html). It says Copied properties for revision 19885. But when I query them, it's just the same. Any ideas how I could approach that problem, or even better -- how to solve it? Any ideas appreciated.

  Read the article

• Adding add-ins to excel - strange communicates

  - by Jacob

  I am using Excel 2010 and 2013. I would like to add an excel add-in from page http://xlloop.sourceforge.net/ . There is file with name xlloop-0.3.2 and extension Microsoft Excel XLL Add-In. I added this file from menu File - Options - Add-Ins - In combobox Manage i choosed Excel Add-Ins - Go... - Browse and I choosed my file. I see the following comunicate: "C:\...\xlloop-0.3.2.xll" is not a valid add-in. Thus, I do next attempt. I go from menu File - Open - and I choosed my file. I see comunicate: The file you are trying to open "xlloop-0.3.2.xll", is in a difference format than specified by the file extension. Verify that the file is not corrupted and is from a trusted source before opening the file. Do you want to open the file now? After I clicked Yes I see a lot of signs (something like from chinese :)) My last attempt was double clicked on file. I see: The file format and extension of "xlloop-0.3.2.xll" don't match. The file could be corrupted or unsafe. Unless you trust its source , don't open it. Do you want open it anyway? After clicked yes I see something like the second attempt. I am really very confused because some of my friends have the same version of excel and they don't have these communicates. Do you have any idea where is the problem in my excel? I very need this addin to work with Java. I will very grateful for your help! Thanks in advance!

  Read the article

• Remote Desktop to Server 2008 fails from one particular Win7 client

  - by Jesse McGrew

  I have a VPS running Windows Web Server 2008 R2. I'm able to connect using Remote Desktop from my home PC (Windows 7), personal laptop (Windows 7), and work laptop (Windows XP). However, I cannot connect from my work PC (Windows 7). I receive the error "The logon attempt failed" in the RDP client, and the server event log shows "An account failed to log on" with this explanation: Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: username Account Domain: hostname Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc0000064 Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: JESSE-PC Source Network Address: - Source Port: - Detailed Authentication Information: Logon Process: NtLmSsp Authentication Package: NTLM Transited Services: - Package Name (NTLM only): - Key Length: 0 I can connect from the offending work PC if I start up Windows XP Mode and use the RDP client inside that. The server is part of a domain but my account is local, so I'm logging in using a username of the form hostname\username. None of the clients are part of a domain. The server uses a self-signed certificate, and connecting from home I get a warning about that, but connecting from work I just get the logon error.

  Read the article

• Force local IP traffic to an external interface

  - by calandoa

  I have a machine with several interfaces that I can configure as I want, for instance: eth1: 192.168.1.1 eth2: 192.168.2.2 I would like to be able to forward all the traffic to one of these local address trhough the other interface. For instance, all requests to an iperf, ftp, http server at 192.168.1.1 are not just routed internally, but forwarded through eth2 (and the external network will take care of re-routing the packet to eth1). I tried and looked at several commands, like iptables, ip route, etc... but nothing worked. The closest behavior I could get was done with: ip route change to 192.168.1.1/24 dev eth2 which send all 192.168.1.x on eth2, except for 192.168.1.1 which is still routed internally. The goal of this setup is to do interface driver testing without using two PCs. I am using Linux, but if you know how to do that with Windows, I'll buy it!

  Read the article

• Wrong CSS mime type with Roundcube 0.5 beta and nginx

  - by Julien Vehent

  I'm running into a CSS problem. This is a setup based on Debian Squeeze (nginx/0.7.67, php5/cgi) on which I installed the latest Roundcube 0.5 beta. PHP is properly processed, login works fine but the CSS files are not loaded and Firefox is throwing the following errors: Error: The stylesheet https://webmail.example.net:10443/roundcube/skins/default/common.css?s=1290600165 was not loaded because its MIME type, "text/html", is not "text/css". Source File: https://webmail.example.net:10443/roundcube/?_task=login Line: 0 Error: The stylesheet https://webmail.example.net:10443/roundcube/skins/default/mail.css?s=1290156319 was not loaded because its MIME type, "text/html", is not "text/css". Source File: https://webmail.example.net:10443/roundcube/?_task=login Line: 0 As far as I understand, nginx doesn't see the .css extension (because ofthe ?s= argument) and thus set the mime type with the default value, being text/html. Should I fix this in nginx (and how ?) or is it roundcube's related ? Edit: It seems that it's nginx related. The content-type isn't set for any other type than text/html. I had to include manually the following declarations to force CSS and JS content-types. That's ugly, and I never had the problem before... any idea ? location ~ \.css { add_header Content-Type text/css; } location ~ \.js { add_header Content-Type application/x-javascript; }

  Read the article

• Reasonable automatic HTML to PDF conversion (in UNIX/Linux environment)

  - by Alex Balashov

  Is there a way to generate PDF documents from HTML files automatically in Linux where the PDF offers some kind of reasonable level of resemblance to the input file? A command-line tool - as opposed to an interactive GUI of some kind - is key. I have tried htmldoc and some related cousins, of course. But these tools are hopelessly stone-age; htmldoc doesn't support CSS at all. You won't find a lot of HTML documents these days that don't have at least some CSS styling. I don't really care about stupid effects or minor embellishments, but the issue is that CSS is at the core of most layouts these days; not many folks are using 6 layers of nested tables anymore. So, if the conversion tool has no grasp of CSS whatsoever, it's not just a matter of "the document doesn't look quite right"; it is likely to not meet the minimum standard of usability at all. It has been suggested to me by some folks to try to use the Gecko rendering engine to generate images that can be converted to PDFs, but I have no idea how one would go about doing this, let alone easily. I have no trouble believing that there are good commercial tools that do this, but I'm really looking for an open-source package if possible, as the endeavour itself is an open-source one and doesn't pay. Thanks in advance!

  Read the article

• How to connect to Oracle DB via ODBC

  - by Mat

  I am attempting to connect to a remote Oracle DB via ODBC. I am totally inexperienced and fail to connect. What I have installed: Oracle 'ODBC Driver for RDB' A program I want to connect from (Altova Mapforce, an ETL) What I do: Under Administrative tools I open the Windows "ODBC Data Source Administrator I click 'Add..' and select the Oracle ODBC Driver The Window 'Oracle RDB Driver Setup' opens. I fill in: Data source name: free choice Description: I leave blank Transport: I choose TCP/IP Server: I input the IP address of the server Service: I leave 'generic' UserID: I enter the user name (that belongs to the password I have) Attach Statement: no idea what do do here?? Upon choosing 'OK', the 'Oracle RDB ODBC Driver Connect' opens and I am prompted the password. I enter the password and the connection fails. Questions Do I need further programs on my computer, e.g. the Oracle client of Instant client? I am never prompted the port of the server - isn't this relevant? I am never prompted SID - isn't this relevant? I connected from SQL developer easily - it prompted only server IP, port, username, password and SID.

  Read the article

• L2TP server - site-to-site vpn connection

  - by Pyro

  I am not sure this is the right place for this question but here goes. We want to connect users using an L2TP VPN connection to a users at the other end of a SonicWall site-to-site VPN. Currently we have a SonicWall firewall/router contraption in the home-office that is connected to a far-office over a VPN. Communications with machines in the home-office and far-office is fine. We also have an L2TP server running on the SonicWall that outside users can connect to. This gives them access to machines in the home-office. Communication between outside users and the home-office is fine. However outside users connected to the home-office via the L2TP server can't communicate with machines in the far-office. Will there need to be network bridging or routing needed? Or will this simply be a firewall setting to get this working? Thanks for any help or clues you provide! Rob

  Read the article

• Configuring NAT and static IP on Cisco 877W

  - by David M Williams

  Hi all, I'm having trouble setting up a static IP reservation on a network. What I want to do is assign IP 192.168.1.105 to MAC address 00:21:5d:2f:58:04 and then port forward 35394 to it. If it helps, output from show ver says Cisco IOS software, C870 software (C870-ADVSECURITYK9-M), version 12.4(4)T7, release software (fc1) ROM: System bootstrap, version 12.3(8r)YI4, release software I have done this - service dhcp ip routing ip dhcp excluded-address 192.168.1.1 192.168.1.99 ip dhcp excluded-address 192.168.1.200 192.168.1.255 ip dhcp pool ClientDHCP network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 192.168.1.1 lease 7 ip dhcp pool NEO host 192.168.1.105 255.255.255.0 hardware-address 0021.5D2F.5804 ip nat inside source static tcp 192.168.1.105 35394 <PUBLIC_IP> 35394 extendable However, the machine is getting assigned IP address 192.168.1.101 not .105 ... any suggestions? Thanks !

  Read the article

• Cisco ASA 5505 and slow download speeds for Apple devices

  - by James

  For traffic routing through my ASA 5505, downloads for all Apple devices, including AppleTV iPad gen 1 IMac MacBook Pro are very slow. speedof.me show less than 1 Mbps download (where I should have 20 Mbps +), yet for any Windows-based device, the download speeds are in excess of 20 Mbps. The Windows device, including the iMac and MacBook Pro machines, are connected via ethernet cable. Why are Apple devices experiencing such pain? Is it an ASA setting, or something else? Thanks.

  Read the article

• MX record configuration for hosted email?

  - by Paul Sanwald

  I am helping a friend with his website, and am having a problem with his webmail configuration, which I suspect is due to a misconfigured MX record. His domain is registered and hosted by hostmonster, they have a webmail option. A record: Host Points To TTL webmail 12.345.789.101 14400 CNAME: mail webmail.d.com 14400 MX Record: 0 @ mail.d.com 14400 I've created an email account on hostmonster, [email protected]: however, when I sent an email to this account, it appears to be routing to /dev/null. I know that it's not actually, but am unsure of the steps I can take to track this down? I've tried using dig, but am unsure where to start. How can I track down where this email is being routed to?

  Read the article

• NTBackup Error: C: is not a valid drive

  - by Chris

  I'm trying to use NtBackup to back up the C: Drive on a Microsoft Windows Small Business Server 2003 machine and get the following error in the log file: Backup Status Operation: Backup Active backup destination: 4mm DDS Media name: "Media created 04/02/2011 at 21:56" Error: The device reported an error on a request to read data from media. Error reported: Invalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. Error: C: is not a valid drive, or you do not have access. The operation did not successfully complete. I'm using a brand new SATA Quantum Dat-72 drive with a brand new tape (tried a couple of tapes). I carry out the following: Open NTBackup Select Backup Tab Tick the box next to C: Ensure Destination is 4mm DDS Media is set to New Press Start Backup Choose Replace the data on the media and press Start Backup NTBackup tries to mount the media Error Message shows: The device reported an error on a request to read data from media. Error reported: INvalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. On checking the log I find the following: Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8018 Date: 04/02/2011 Time: 22:02:02 User: N/A Computer: SERVER Description: Begin Operation For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. and then; Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8019 Date: 04/02/2011 Time: 22:02:59 User: N/A Computer: SERVER Description: End Operation: The operation was successfully completed. Consult the backup report for more details. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Read the article

• Durability of Websockets Server

  - by smitchell360

  I am starting to experiment with websockets. Does anyone know of a websockets server (open source or paid) that provides a durable store of the websocket "channel"? All of the examples that I have found do not address durability -- if a websockets server goes down, all "channel" data is lost. Services such as Pusher do not really discuss whether they address the durability issue (and I have not received a response from tech support yet). Happy to roll my own, but would rather not reinvent the wheel. EDIT: I'm not looking for websockets 101 information. That is readily available and understood. I'm looking for a server (open source or paid) that supports websockets and has a durable store for the websocket data so that, in the event that a server fails, a new server can take over where the original one left off. Two main purposes: 1. support failover scenarios contemplated by the websockets Network Working Group http://tools.ietf.org/html/draft-ibc-websocket-dns-srv-02#section-5.1 (most importantly so that missed messages are sent when a client connects to a failover server) 2. support scenarios where new subscribers must receive all past messages that were published. Of course this can be handled at the application layer...but that is not what I am looking for.

  Read the article

• SQL server agent job to execute SSIS package fails, package succeds if run manually

  - by growse

  I've got a SSIS package installed on a SQL server (SQL Server 2012). It's fairly simple and just fetches data from a remote data source and adds it into a local table. The remote connection string is using SQL server authentication, while the local connection is using Windows auth. The remote connection password is protected, and the package was imported setting the protection level to Rely on server storage and roles for access control. If I run the SSIS package manually, it works. If I run it from the command line using dtexec, it works. If I use runas to switch to the domain account that the SQL server agent is running under, and then run the package using dtexec, it works. If I create a SQL Agent job with a single step to run the package, it fails, providing very little detail as to what's going on. I'm guessing it's not able to get the password to log into the remote SQL server, because it fails very quickly. Also, if I tick 'log to table' and view the resulting file, I get the following: Description: ADO NET Source has failed to acquire the connection {0D8F2CD4-A763-4AEB-8B52-B8FAE0621ED3} with the following error message: "Login failed for user 'username'.". If I try to add the password in the connection string manually under data sources in the job step dialog, it refuses to save it, always seeming to remove the 'password' bit of the connection string. I thought that SQL server agent jobs always ran under the context of the account which the SQL server agent is running under. This account is a sysadmin on the local SQL server, and the package works using dtexec under that account, so why would it fail when trying to run as an agent job?

  Read the article

• Robocopy silently missing files

  - by John Hunt

  I'm using Robocopy to sync data from our server's hard disk to an external disk as a backup. It's a pretty simple solution but pretty much the best/easiest one we could come up with - we use two external disks and rotate them offsite. Anyway, here's the script (with the comments taken out) that I'm using to do it. It works very well, it's quick and almost 100% complete - however it's acting pretty strange with a few files (note company name has been changed in paths to protect the innocent): @ECHO OFF set DATESTAMP=%DATE:~10,4%/%DATE:~4,2%/%DATE:~7,2% %TIME:~0,2%:%TIME:~3,2%:%TIME:~6,2% SET prefix="E:\backup_log-" SET source_dir="M:\Company Names Data\Working Folder\_ADMIN_BACKUP_FILES\COMPA AANY Business Folder_Backup_040407\COMPANY_sales order register\BACKUP CLIENT FOLDERS & CURRENT JOBS pre 270404\CLIENT SALES ORDER REGISTER" SET dest_dir="E:\dest" SET log_fname=%prefix%%date:~-4,4%%date:~-10,2%%date:~-7,2%.log SET what_to_copy=/COPY:DAT /MIR SET options=/R:0 /W:0 /LOG+:%log_fname% /NFL /NDL ROBOCOPY %source_dir% %dest_dir% %what_to_copy% %options% set DATESTAMP=%DATE:~10,4%/%DATE:~4,2%/%DATE:~7,2% %TIME:~0,2%:%TIME:~3,2%:%TIME:~6,2% cscript msg.vbs "Backup completed at %DATESTAMP% - Logs can be found on the E: drive." :END Normally the source would just be M:\Comapany name data\ but I altered the script a bit to test the problem. The following files in the source are not copied to the dest: Someclient\SONICP~1.DOC Someclient\SONICP~2.DOC Someclient\SONICP~3.DOC However, files in the same directory named: TIMESH~1.XLS TIMESH~2.XLS are copied. I'm able to open the files that aren't copied with no trouble at all, and they certainly weren't opened when I ran robocopy so it's not a locking issue. Robocopy is running as administrator so it's not a permissions issue. There's no trace these files were even attempted to be copied as there are no errors being output in the log or in my command prompt. Does anyone have any suggestions as to what this might be? Busted hard disk? Cheers, John.

  Read the article

• Simple, manageable DNS on EC2?

  - by dkulchenko

  I'm working on a large network of servers sitting on EC2, and need a way for the servers to know about each other's locations in the cloud. I thought the simplest way would be to use DNS, because if I replace the EC2 instance, I simply update the DNS record, and the rest of the servers will know about it (with names like users.db.mysoft.com, routing.mysoft.com, cluster1.memcached.mysoft.com). I'm considering setting up a master DNS server on a micro/small instance to accommodate this. I'd preferably need something that's as simple as a key-value store (hostname - IP) into which the platform could remotely add/remove entries. Can I do this with BIND? Or is there a better solution?

  Read the article

• Wall jacks to patch panel?

  - by rj454me

  OK, I'm by no means a seasoned networking pro and I had no say so in the design of our current server room which is in dire need of an extreme makeover. Basically, in our server room we have 12 wall plates with 4 RJ-45 ports on each - 48 total RJ-45 ports. From these 48 ports is a spaghetti bowl of network cables feeding our servers located in a rack - there is no patch panel currently, just straight from the wall jack to each server. What I was wondering is, is it feasible to mount a 48 port patch panel in our server rack and feed into this patch panel from the wall jacks (of course nicely routing this cable through some new cable trays)? We really don't have the funds to mount the patch panel and have it fed directly from the switches in the telcom closet which is several hundred feet away. Current: Switch (Telcom Closet) - Wall Jacks - Servers Proposed: Switch (Telcom Closet) - Wall Jacks - Patch Panel - Servers

  Read the article

< Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >