Search Results

Search found 46646 results on 1866 pages for 'operating system'.

Page 408/1866 | < Previous Page | 404 405 406 407 408 409 410 411 412 413 414 415  | Next Page >

  • WiFi slow sometimes, reboot helps, how do I debug it?

    - by January
    Ubuntu 12.04.1 with all updates installed. Laptop Lenovo Thinkpad X230 with Intel Corporation Centrino Advanced-N 6205. WiFi sometimes becomes extremely slow. Often this occurs when I wake the system from suspend and connect to a different network. I find no obvious clues in system logs. /etc/init.d/network-manager restart doesn't help, but a reboot does. How can I go on with debugging this issue? In specific, which parts of the system should I try to restart (without a complete reboot)? I know of problems with Intel WiFi (see for example this question and the instructions here), but if that was the problem, I would expect the WiFi to be slow at all times, and not just sometimes. Also, I have a gut feeling that it might be a DNS issue (for example, getting a page from a known server is faster than accessing a new server), but I don't know how to tackle it. Update: despite numerous updates in the meanwhile, I still observe this behavior. It happens always when I access my WiFi router at home after returning from work; when I reboot my laptop, the connection speed is good again.

    Read the article

  • New SPC2 benchmark- The 7420 KILLS it !!!

    - by user12620172
    This is pretty sweet. The new SPC2 benchmark came out last week, and the 7420 not only came in 2nd of ALL speed scores, but came in #1 for price per MBPS. Check out this table. The 7420 score of 10,704 makes it really fast, but that's not the best part. The price one would have to pay in order to beat it is ridiculous. You can go see for yourself at http://www.storageperformance.org/results/benchmark_results_spc2The only system on the whole page that beats it was over twice the price per MBPS. Very sweet for Oracle. So let's see, the 7420 is the fastest per $. The 7420 is the cheapest per MBPS. The 7420 has incredible, built-in features, management services, analytics, and protocols. It's extremely stable and as a cluster has no single point of failure. It won the Storage Magazine award for best NAS system this year. So how long will it be before it's the number 1 NAS system in the market? What are the biggest hurdles still stopping the widespread adoption of the ZFSSA? From what I see, it's three things: 1. Administrator's comfort level with older legacy systems. 2. Politics 3. Past issues with Oracle Support.   I see all of these issues crop up regularly. Number 1 just takes time and education. Number 3 takes time with our new, better, and growing support team. many of them came from Oracle and there were growing pains when they went from a straight software-model to having to also support hardware. Number 2 is tricky, but it's the job of the sales teams to break through the internal politics and help their clients see the value in oracle hardware systems. Benchmarks like this will help.

    Read the article

  • Why do I get disk I/O errors booting the 3.2 kernel on a xen vps server?

    - by Doug
    I have a xen vps, which I just upgraded to the new LTS 12 Precise Pangolin. However, I see this error on booting: [ 12.848076] end_request: I/O error, dev xvda, sector 12841 [ 12.848093] end_request: I/O error, dev xvda, sector 12841 [ 12.848103] Buffer I/O error on device xvda1, logical block 1605 [ 12.848110] lost page write due to I/O error on xvda1 [ 12.848129] Aborting journal on device xvda1. Results in / being mounted read-only. Reboot: [ 3.087257] EXT3-fs (xvda1): warning: ext3_clear_journal_err: Marking fs in need of filesystem check. [ 3.087677] EXT3-fs (xvda1): recovery complete [ 3.088514] EXT3-fs (xvda1): mounted filesystem with ordered data mode Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. fsck from util-linux 2.20.1 PRGMRDISK1 contains a file system with errors, check forced. Checking disk drives for errors. This may take several minutes. Press C to cancel all checks in progress PRGMRDISK1: ***** REBOOT LINUX ***** PRGMRDISK1: 371152/6001184 files (2.8% non-contiguous), 4727949/12000000 blocks mountall: fsck / [308] terminated with status 3 mountall: System must be rebooted: / [ 151.566949] Restarting system. Name ID Mem VCPUs State Time(s) shadowmint 236 2048 1 --p--- 0.0 Reboot - back to 1. This is definitely an issue with the 3.2 kernel, because booting the 3.0.0 or 2.6.38 kernel series make this issue magically disappear. I'm certain this is some kind of weird xen thing, but no idea. Anyone? Anyhow, until this is resolve I strongly recommend against upgrading if you're running a xen server.

    Read the article

  • Banshee doesn't like opening websites

    - by Allan
    I have come across two bugs (which will be added to launchpad if it's not resolved here) When I open any of the websites in Banshee Amazon or Miro Guide as soon as the site is finished loading it crashes Banshee. If I play any video local or remote it will show 1 frame maybe 0.5 sec of video then I get a black screen and audio continues in the backgound. Specs & Details I have a Fujitsu Amilo 1718 laptop with 2 gig of ram (original 1 gig) graphics is provided by ATI Radeon Xpress 200M (don't laugh it works with compiz....just) I have a link to the output of banshee --debug Here Don't have time to read? Here are the Highlights [2 Warn 11:52:34.814] Caught an exception - System.ArgumentNullException: Argument cannot be null. then abit later Debug info from gdb: Could not attach to process. If your uid matches the uid of the target process, check the setting of /proc/sys/kernel/yama/ptrace_scope, or try again as the root user. For more details, see /etc/sysctl.d/10-ptrace.conf ptrace: Operation not permitted. ================================================================= Got a SIGSEGV while executing native code. This usually indicates a fatal error in the mono runtime or one of the native libraries used by your application. ================================================================= Aborted Not music to my ears as you can expect. The version I am using is 1.9.4 from the daily ppa but these bugs happen in any version of banshee from 1.8.1 and up. So if any one has come across a fix for this problem please share!! additional info Both VLC and Miro work on my system so there isn't a system wide problem with video and I haven't mentioned mono so no trolling it will get voted down.

    Read the article

  • Disaster Recovery Example

    Previously, I use to work for a small internet company that sells dental plans online. Our primary focus concerning disaster prevention and recovery is on our corporate website and private intranet site. We had a multiphase disaster recovery plan that includes data redundancy, load balancing, and off-site monitoring. Data redundancy is a key aspect of our disaster recovery plan. The first phase of this is to replicate our data to multiple database servers and schedule daily backups of the databases that are stored off site. The next phase is the file replication of data amongst our web servers that are also backed up daily by our collocation. In addition to the files located on the server, files are also stored locally on development machines, and again backed up using version control software. Load balancing is another key aspect of our disaster recovery plan. Load balancing offers many benefits for our system, better performance, load distribution and increased availability. With our servers behind a load balancer our system has the ability to accept multiple requests simultaneously because the load is split between multiple servers. Plus if one server is slow or experiencing a failure the traffic is diverted amongst the other servers connected to the load balancer allowing the server to get back online. The final key to our disaster recovery plan is off-site monitoring that notifies all IT staff of any outages or errors on the main website encountered by the monitor. Messages are sent by email, voicemail, and SMS. According to Disasterrecovery.org, disaster recovery planning is the way companies successfully manage crises with minimal cost and effort and maximum speed compared to others that are forced to make decision out of desperation when disasters occur. In addition Sun Guard stated in 2009 that the first step in disaster recovery planning is to analyze company risks and factor in fixed costs for things like hardware, software, staffing and utilities, as well as indirect costs, such as floor space, power protection, physical and information security, and management. Also availability requirements need to be determined per application and system as well as the strategies for recovery.

    Read the article

  • FOSS Development: Who develops the OS-specific packages?

    - by achristi
    I have a couple of FOSS projects. They can be a bit of a pain to get running unless you've got dependencies in place already, which I figure is par for the course for FOSS projects. We know that each free operating system out there has its own package management systems. A few of them, such as homebrew on Mac OS or AUR on Arch linux are very friendly to community contributions. What I am wondering is, who exactly is expected to contribute packages? Primarily I am concerned with the case of small or developing projects, since it's pretty standard for the big projects to be put in there by the OS maintainers. From my perspective, it is something of a chicken-egg problem, because your software will not make its way into a package system if it does not have users, and it is less likely to gain users if it is not easy to install and use. For the sake of discussion, let's assume that the software in question is actually legitimately useful. I can see where people could create crapware or spam and that should obviously be kept out of any package system. So, in summary, whose job is this? Is it spammy for a FOSS software dev to put his own work into various OS package repositories?

    Read the article

  • correct way to implement auth/acl in mvc

    - by WiseStrawberry
    I am looking into making a correctly laid out MVC auth/acl system. I think I want the authentication of a user (and the session handling) to be seperate from the ACL system. (I don't know why but this seems a good idea from the things I've read) What does mvc have to do with this question you ask? Because I wish for the application to be well integrated with my acl. An example of a controller (CodeIgniter) <?php class forums extends MX_Controller { $allowed = array('users', 'admin'); $need_login = true; function __construct() { //example of checking if logged in. if($this->auth->logged_in() && $this->auth->is_admin()) { echo "you're logged in!"; } } public function add_topic() { if($this->auth->allowed('add_topic') { //some add topic things. } else { echo 'not allowed to add topic'; } } } ?> My thoughts $this->auth would be autoloaded in the system. I would like to check the $allowed array against the user currently (not) logged in and react accordingly. Is this a good way of doing things? I haven't seen much literature on mvc integration and auth. I want to make things as easy as possible.

    Read the article

  • Floating point undesirable in highly critical code?

    - by Kirt Undercoffer
    Question 11 in the Software Quality section of "IEEE Computer Society Real-World Software Engineering Problems", Naveda, Seidman, lists fp computation as undesirable because "the accuracy of the computations cannot be guaranteed". This is in the context of computing acceleration for an emergency braking system for a high speed train. This thinking seems to be invoking possible errors in small differences between measurements of a moving object but small differences at slow speeds aren't a problem (or shouldn't be), small differences between two measurements at high speed are irrelevant - can there be a problem with small roundoff errors during deceleration for an emergency braking system? This problem has been observed with airplane braking systems resulting in hydroplaning but could this actually happen in the context of a high speed train? The concern about fp errors seems to not be well-founded in this context. Any insight? The fp is used for acceleration so perhaps the concern is inching over a speed limit? But fp should be just fine if they use a double in whatever implementation language. The actual problem in the text states: During the inspection of the code for the emergency braking system of a new high speed train (a highly critical, real-time application), the review team identifies several characteristics of the code. Which of these characteristics are generally viewed as undesirable? The code contains three recursive functions (well that one is obvious). The computation of acceleration uses floating point arithmetic. All other computations use integer arithmetic. The code contains one linked list that uses dynamic memory allocation (second obvious problem). All inputs are checked to determine that they are within expected bounds before they are used.

    Read the article

  • Win7 no longer available after installing 12.04

    - by Michael
    I have installed Ubuntu 12.04 but my Windows 7 partition seems to have been lost. It is in sda2. Can anyone help me how to get this Windows 7 partition back without having to reinstall Windows 7? Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd45cd45c Device Boot Start End Blocks Id System /dev/sda1 2048 61433855 30715904 83 Linux /dev/sda2 * 61433856 122873855 30720000 7 HPFS/NTFS/exFAT /dev/sda3 122873856 976769023 426947584 7 HPFS/NTFS/exFAT Disk /dev/sdb: 203.9 GB, 203928109056 bytes 255 heads, 63 sectors/track, 24792 cylinders, total 398297088 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x03ee03ee Device Boot Start End Blocks Id System /dev/sdb1 * 63 20482874 10241406 c W95 FAT32 (LBA) /dev/sdb2 20482875 40965749 10241437+ 1c Hidden W95 FAT32 (LBA) /dev/sdb3 40965750 398283479 178658865 f W95 Ext'd (LBA) /dev/sdb5 40965813 76694309 17864248+ 7 HPFS/NTFS/exFAT /dev/sdb6 76694373 108856439 16081033+ 7 HPFS/NTFS/exFAT /dev/sdb7 108856503 398283479 144713488+ 7 HPFS/NTFS/exFAT Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 240 heads, 63 sectors/track, 129201 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000001 Device Boot Start End Blocks Id System /dev/sdc1 * 63 20480543 10240240+ 82 Linux swap / Solaris /dev/sdc2 20480605 1953519119 966519257+ f W95 Ext'd (LBA) /dev/sdc5 20480607 1953519119 966519256+ 7 HPFS/NTFS/exFAT

    Read the article

  • "The volume filesystem root has only..."

    - by jcslzr
    I am having this problem in ubuntu 12.04, but I fin strange that when I go to /tmp it wont allow me to delete some files, with message "Operation not permitted" or "this file could not be handled because you dont have permissions to read it". It is only a PC and I have the root password. I was trying to get at least 2000 MB of free space on the root file system to upgrade to 12.10 and see if that resolved the problem. Currently free space on root file system is 190 MB. This is my output: root@jcsalazar-Vostro-3550:~# df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda6 7688360 7112824 184984 98% / udev 2009288 4 2009284 1% /dev tmpfs 806636 1024 805612 1% /run none 5120 0 5120 0% /run/lock none 2016584 5316 2011268 1% /run/shm /dev/sda5 472036 255920 191745 58% /boot /dev/sda7 30758848 7085480 22110900 25% /home root@jcsalazar-Vostro-3550:~# sudo parted -l Model: ATA TOSHIBA MK3261GS (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 106MB 105MB primary fat16 2 106MB 15.8GB 15.7GB primary ntfs boot 3 15.8GB 278GB 262GB primary ntfs 4 278GB 320GB 41.9GB extended 5 278GB 279GB 499MB logical ext4 6 279GB 287GB 7999MB logical ext4 7 287GB 319GB 32.0GB logical ext4 8 319GB 320GB 1443MB logical linux-swap(v1) I apprecciate any new ideas that can help me. Thnx Carlos

    Read the article

  • Grub2 attempting to boot hd1 when it should boot hd0

    - by JoBu1324
    I'm attempting to perform a "normal" install on a USB3 SSD (I don't know if it is noteworthy, but I don't have a swap partition). The installation proceeds normally (I'm installing from a USB2 device I created using LiLi Boot, with a copy of Ubuntu 12.10 64bit that I downloaded directly from the source. The system I'm running Ubuntu on has had a more traditional installation of ubuntu running on it without issue (also 12.10), so I know that everything works A-OK when booting from a 7200RPM internal disk. There are a number of oddities that I've noticed so far, including graphics corruption, but the first and most pressing issue is that Grub2 refuses to recognize the correct hd. From /boot/grub/grub.cfg: if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_msdos insmod ext2 set root='hd1,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 b58ee4f7-d41d-400a-b7b8-18bd1f0ae9d3 else search --no-floppy --fs-uuid --set=root b58ee4f7-d41d-400a-b7b8-18bd1f0ae9d3 fi font="/usr/share/grub/unicode.pf2" fi This is from a 100% fresh install of linux (first boot), which was installed while no hard drives were connected to the system, other than the USB2 LiLi drive. The system refuses to boot unless I change the hd1,msdos1 - hd0,msdos1 in the grub menu at boot, when it is the only disk device connected to the PC. What options are left for me to troubleshoot this issue? I've been racking my brains and taxing the internet trying to dig up something on this problem, but now I'd like to see if the Ubuntu community can rise to the challenge and help me fix this boot problem. This is the second time I've attempted this particular setup. The first time, after days of wasted time, I managed to get it to boot every other boot - i.e. every even boot it would boot into Ubuntu like it was happy; every odd boot it would boot into the BusyBox or Grub prompt. At one point it complained that it couldn't find /dev/disk/by-uuid/[the disk], which I found most perplexing, since the disk was there and booted before and after the occurrence (with intervention).

    Read the article

  • Dynamic (C# 4.0) &amp; Var in a nutshell.

    - by mbcrump
    A Var is static typed - the compiler and runtime know the type. This can be used to save some keystrokes. The following are identical. Code Snippet var mike = "var demo"; Console.WriteLine(mike.GetType());  //Returns System.String   string mike2 = "string Demo"; Console.WriteLine(mike2.GetType()); //Returns System.String A dynamic behaves like an object, but with dynamic dispatch. The compiler doesn’t know anything about it at compile time. Code Snippet dynamic duo = "dynamic duo"; Console.WriteLine(duo.GetType()); //System.String //duo.BlowUp(); //A dynamic type does not know if this exist until run-time. Console.ReadLine(); To further illustrate this point, the dynamic type called “duo” calls a method that does not exist called BlowUp(). As you can see from the screenshot below, the compiler is reporting no errors even though BlowUp() does not exist. The program will compile fine. It will however throw a runtimebinder exception after it hits that line of code in runtime. Let’s try the same thing with a Var. This time, we get a compiler error that says BlowUp() does not exist. This program will not compile until we add a BlowUp() method.  I hope this helps with your understand of the two. If not, then drop me a line and I’ll be glad to answer it.

    Read the article

  • Ubuntu 13.10, kernel 3.11 blank screen issue with hybrid graphics

    - by Lagerbaer
    On my HP Envy, which has both an Intel on-chip graphics card and an Nvidia Geforce: *-display UNCLAIMED description: 3D controller product: GK208M [GeForce GT 740M] vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: cap_list configuration: latency=0 resources: memory:d2000000-d2ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:5000(size=128) memory:b2000000-b207ffff *-display description: VGA compatible controller product: 4th Gen Core Processor Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 06 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:d3000000-d33fffff memory:c0000000-cfffffff ioport:6000(size=64) I have trouble with all newer kernels. I basically had to install 12.04 LTS and use their 3.5 kernel family to get the system to boot. The 3.8 from 12.10 or the newest 3.11 from Ubuntu 13.10 leave me with a black screen upon boot. On one occasion I did hear the "log in" sound, but the screen did not display anything. I have purged all nvidia drivers so I guess it should just use the intel drivers, but apparently this is all messed up with newer kernel versions. This is different from the other "nvidia boots into blank screen" bug in that I don't rely solely on an nvidia card. Surely the intel on-chip card should be supported and leave me with something different from a blank screen? Again, it only works with kernel versions 3.5.0-41-generic, not with the 3.11.0-12 one that ships with Ubuntu 13.10. When I go into the grub menu and change the boot options from 'quiet splash' to 'nomodeset' I am able to boot the system, but then I don't get any graphics and trying 'sudo service lightdm start' doesn't succeed (I get 100% CPU for apport, but this doesn't do anything either, so I kill it). Help, I'm all out of ideas. EDIT: Let me add that I'm using the EFI boot system and have a dual-boot installation with Windows 8.

    Read the article

  • Minimum percentage of free physical memory that Linux require for optimal performance

    - by csoto
    Recently, we have been getting questions about this percentage of free physical memory that OS require for optimal performance, mainly applicable to physical compute nodes. Under normal conditions you may see that at the nodes without any application running the OS take (for example) between 24 and 25 GB of memory. The Linux system reports the free memory in a different way, and most of those 25gbs (of the example) are available for user processes. IE: Mem: 99191652k total, 23785732k used, 75405920k free, 173320k buffers The MOS Doc Id. 233753.1 - "Analyzing Data Provided by '/proc/meminfo'" - explains it (section 4 - "Final Remarks"): Free Memory and Used Memory Estimating the resource usage, especially the memory consumption of processes is by far more complicated than it looks like at a first glance. The philosophy is an unused resource is a wasted resource.The kernel therefore will use as much RAM as it can to cache information from your local and remote filesystems/disks. This builds up over time as reads and writes are done on the system trying to keep the data stored in RAM as relevant as possible to the processes that have been running on your system. If there is free RAM available, more caching will be performed and thus more memory 'consumed'. However this doesn't really count as resource usage, since this cached memory is available in case some other process needs it. The cache is reclaimed, not at the time of process exit (you might start up another process soon that needs the same data), but upon demand. That said, focusing more specifically on the percentage question, apart from this memory that OS takes, how much should be the minimum free memory that must be available every node so that they operate normally? The answer is: As a rule of thumb 80% memory utilization is a good threshold, anything bigger than that should be investigated and remedied.

    Read the article

  • How to make a iOS plugin for Unity3d

    - by DannoEterno
    I've passed last 2 days reading articles and book for understand how can i make a plugin for iOS in Unity. Basically i need just a demo for understand how it work. For now i've tried to make this process (with really poor luck): I've started a new project in Unity and writed a simple script using UnityEngine; using System.Collections; using System; using System.Runtime.InteropServices; public class CallPlugin : MonoBehaviour { [DllImport ("__Internal")] private static extern int test(); void Start () { Debug.Log(test()); } } Then i've created a project in Xcode with this simple script: extern "C"{ int test() { int che = 5; return che; } } Then i've tried: to put the .mm and .h in the Assets/Plugins/iOS = nothing to build the unity project and than add the .h and .mm in the Xcode project = nothing In Unity i will always get the EntryPointNotFoundException, so unity see the file but is unable to reach the method. The problem is... how?! :) Maybe i miss something or i've done something wrong? Thanks a lot for every help that you can give me :)

    Read the article

  • Using ConcurrentQueue for thread-safe Performance Bookkeeping.

    - by Strenium
    Just a small tidbit that's sprung up today. I had to book-keep and emit diagnostics for the average thread performance in a highly-threaded code over a period of last X number of calls and no more. Need of the day: a thread-safe, self-managing stats container. Since .NET 4.0 introduced new thread-safe 'Collections.Concurrent' objects and I've been using them frequently - the one in particular seemed like a good fit for storing each threads' performance data - ConcurrentQueue. But I wanted to store only the most recent X# of calls and since the ConcurrentQueue currently does not support size constraint I had to come up with my own generic version which attempts to restrict usage to numeric types only: unfortunately there is no IArithmetic-like interface which constrains to only numeric types – so the constraints here here aren't as elegant as they could be. (Note the use of the Average() method, of course you can use others as well as make your own).   FIFO FixedSizedConcurrentQueue using System;using System.Collections.Concurrent;using System.Linq; namespace xxxxx.Data.Infrastructure{    [Serializable]    public class FixedSizedConcurrentQueue<T> where T : struct, IConvertible, IComparable<T>    {        private FixedSizedConcurrentQueue() { }         public FixedSizedConcurrentQueue(ConcurrentQueue<T> queue)        {            _queue = queue;        }         ConcurrentQueue<T> _queue = new ConcurrentQueue<T>();         public int Size { get { return _queue.Count; } }        public double Average { get { return _queue.Average(arg => Convert.ToInt32(arg)); } }         public int Limit { get; set; }        public void Enqueue(T obj)        {            _queue.Enqueue(obj);            lock (this)            {                T @out;                while (_queue.Count > Limit) _queue.TryDequeue(out @out);            }        }    } }   The usage case is straight-forward, in this case I’m using a FIFO queue of maximum size of 200 to store doubles to which I simply Enqueue() the calculated rates: Usage var RateQueue = new FixedSizedConcurrentQueue<double>(new ConcurrentQueue<double>()) { Limit = 200 }; /* greater size == longer history */   That’s about it. Happy coding!

    Read the article

  • Is this the correct approach to an OOP design structure in php?

    - by Silver89
    I'm converting a procedural based site to an OOP design to allow more easily manageable code in the future and so far have created the following structure: /classes /templates index.php With these classes: ConnectDB Games System User User -Moderator User -Administrator In the index.php file I have code that detects if any $_GET values are posted to determine on which page content to build (it's early so there's only one example and no default): function __autoload($className) { require "classes/".strtolower($className).".class.php"; } $db = new Connect; $db->connect(); $user = new User(); if(isset($_GET['gameId'])) { System::buildGame($gameId); } This then runs the BuildGame function in the system class which looks like the following and then uses gets in the Game Class to return values, such as $game->getTitle() in the template file template/play.php: function buildGame($gameId){ $game = new Game($gameId); $game->setRatio(900, 600); require 'templates/play.php'; } I also have .htaccess so that actual game page url works instead of passing the parameters to index.php Are there any major errors of how I'm setting this up or do I have the general idea of OOP correct?

    Read the article

  • 11.10 install hangs at different places

    - by TreefrogInc
    I've been trying to install Oneiric for some time now, and I've looked everywhere for a solution to the problems I've been having. So far, I've attempted four times to install it, so now I'm up to a point of panic. So I grabbed the 11.10 x64 iso from the website, and after verifying that the md5 hash is correct, I burned that onto my last remaining clean CD. On my first attempt, everything went perfectly up to the middle of the installation, and the progress bar stopped when it said: "configuring target system." I could do everything else, only the installation seemed to have stopped. After I googled my problem, I went and used the "check disc for errors" option, which said everything was fine. Then I tried the installation again, only this time, I selected "Install Ubuntu Now" instead of the "try before installing". Again, the same problem. My second and third tries didn't even reach the installation phase. It just stopped at the 5 blinking dots and never went any further. I used the same non-rewritable cd for all the attempts, as the error check didn't show any problems and because I'm currently out of usable cds. System: Core i3 CPU @ 3.4 GHz, 500 GB HDD (250g used for Win7, 70g used for preexisting system partitions, 180g unallocated).

    Read the article

  • SSD on USB 3.0 doesnt always mount

    - by juergen
    I would like to ask you for some support for this issue. The SSD I use is apparently slightly damaged. Atm it shows this popular Corsair Series 3 problem. symptom: the disk is working for some minutes and then just suddenly stops. Two months ago it worked like a charm. This was my boot device in these days. So now I still need to copy some data out of the device which leads me to my question. Usually the SSD is working again for some minutes, when i unplug and replug its power. It gets detected by the system again and I can continue my backup. The problem on Ubuntu is, that it is not recognized again after two or three replugs. I have to reboot to bring it back. To specify this situation: when i unplug and replug my USB mouse before i reboot it is not recognized as well. So something seems to be wrong with the system also. my question: how do i fix this rebooting issue? I will post all the logs you need to analyse. The problem doesnt depend on the interface. I tried USB3.0, 2.0 and Sata already. Thank you! cheers my system: Ubuntu 11.10, Gigabyte G41MT-S2P, Intel E6750 Corsair Force Series 2 - F120, Digitus USB 3.0 Adapter, USB 3.0 interface card

    Read the article

  • Engineered Systems and PCI

    - by Joel Weise
    Oracle has a number of different engineered systems.  These are design to be highly integrated, optimized and secure systems.  The Exadata database engineered system and the Exalogic application engineered system are two good examples.  Often I am asked how these comply with different standards and regulations.  Exalogic is the Oracle engineered system that supports applications and the focus of today's blog.  First, we must recognize that as a collection of hardware and software, we cannot simply state that Exalogic is "compliant" with PCI DSS.  This is because Exalogic must be implemented within the context of one's existing IT infrastructure, the security features of that infrastructure, the governance framework that exists, security policies, operational procedures, and other factors.  What we can say though, is that Exalogic has been designed with various security capabilities that can be utilized to support compliance to PCI DSS as well as other standards and regulations (e.g., NIST and HIPAA).  Given that, Exalogic can be an excellant platform for running PCI related payment applications.  Coalfire Systems, a leading QSA in the US, has evaluated Exalogic against PCI DSS and supports this position.  Their evaluation can be found here: Exalogic and PCI Compliance. I hope you find it useful. 

    Read the article

  • Payables Master Generic Datafix (MGD) Now Checks For Even More EBTax Corruption!!

    - by MargaretW
    The Payables MGD is a vital diagnostic that all R12/12.1 customers need to run regularly to check the data integrity of their Payables system. This script does not make any changes to your system, so it’s risk free and it produces a HTML formatted output showing which data corruption issues have been detected and provides the Doc ID’s that will be needed to fix them. This MGD diagnostic (version 120.92 and above) is even better than it used to be as it now checks for 11 new EBTax corruption signatures that Support was seeing on a consistent basis. These lengthy Service Requests could have been avoided with one run of the MGD which tells you right away if you have data corruption. It’s the first thing our Payables support engineers will have you run when you log an SR so why not be one step ahead? The new EBTax signatures that were included in this latest update to the MGD are pulled from the following common solutions documents: R12 E-Business Tax/Payables Data-Fixes: Cause and action to handle ZX_LINES_SUMMARY_U1 issue Doc ID 1152123.1 EB-Tax Data Corruption Issues & Recommended Solutions Doc ID 1316316.1 The specific issues that are now screened are detailed below: 1. TAXABLE_BASIS_FORMULA and MANUALLY_ENTERED_FLAG mismatch 2. ESTABLISHMENT_ID mismatch 3. TRX_NUMBER mismatch 4. TAX_RATE mismatch 5. Currency Conversion related columns mismatch in Migrated Invoices 6. HISTORICAL_FLAG and RECORD_TYPE_CODE mismatch 7. ADJUSTED_DOC_TRX_LEVEL_TYPE is NULL or APPLIED_FROM_TRX_LEVEL_TYPE is NULL 8. Missing Reversal Tax Distributions For Tax Distributions 9. Tax Lines for discarded or cancelled Transaction Lines are not marked as cancelled 10. Error AP_ERR_TAX_DIST_SYNC 11. AP_UNFROZEN_DIST_EXIST/Unfrozen Tax Distributions exist for this invoice Get Proactive – Check your system for these common EBTax issues and fix the data before it causes a problem. Access the MGD note and watch the video that explains how it works here - R12: Master GDF Diagnostic to Validate Data Related to Invoices, Payments, Accounting, Suppliers and EBTax [VIDEO] Doc ID 1360390.1

    Read the article

  • Storing editable site content?

    - by hmp
    We have a Django-based website for which we wanted to make some of the content (text, and business logic such as pricing plans) easily editable in-house, and so we decided to store it outside the codebase. Usually the reason is one of the following: It's something that non-technical people want to edit. One example is copywriting for a website - the programmers prepare a template with text that defaults to "Lorem ipsum...", and the real content is inserted later to the database. It's something that we want to be able to change quickly, without the need to deploy new code (which we currently do twice a week). An example would be features currently available to the customers at different tiers of pricing. Instead of hardcoding these, we read them from database. The described solution is flexible but there are some reasons why I don't like it. Because the content has to be read from the database, there is a performance overhead. We mitigate that by using a caching scheme, but this also adds some complexity to the system. Developers who run the code locally see the system in a significantly different state compared to how it runs on production. Automated tests also exercise the system in a different state. Situations like testing new features on a staging server also get trickier - if the staging server doesn't have a recent copy of the database, it can be unexpectedly different from production. We could mitigate that by committing the new state to the repository occasionally (e.g. by adding data migrations), but it seems like a wrong approach. Is it? Any ideas how best to solve these problems? Is there a better approach for handling the content that I'm overlooking?

    Read the article

  • High Availability

    - by mattjgilbert
    Udi Dahan presented at the UK Connected Systems User Group last night. He discussed High Availability and pointed out that people often think this is purely an infrastructure challenge. However, the implications of system crashes, errors and resulting data loss need to be considered and managed by software developers. In addition a system should remain both highly reliable (backwardly compatible) and available during deployments and upgrades. The argument is that you cannot be considered highly available if your system is always down every time you upgrade. For our recent BizTalk 2009 upgrade we made use of our Business Continuity servers (note the name, rather than calling them Disaster Recovery servers ? ) to ensure our clients could continue to operate while we upgraded the Production BizTalk servers. Then we failed back to the newly built 2009 environment and rebuilt the BC servers. Of course, in the event of an actual disaster there was a window where either one or the other set were not available to take over – however, our Staging machines were already primed to switch to production settings, having been used for testing the upgrade in the first place.   While not perfect (the failover between environments was not automatic and without some minimal outage) planning the upgrade in this way meant BizTalk was online during the rebuild and upgrade project, we didn’t have to rush things to get back on-line and planning meant we were ready to be as available as we could be in the event of an actual disaster.

    Read the article

  • Sub-systems in game engines

    - by Hillel
    So here's the problem- I'm writing my own engine library, and it works fine with stuff like menus and the actual game screen. The thing is, I can't really figure out how to integrate something like an intro or dialogue preceding certain levels into this system. Let's look at another example- say I have a game-specific engine which gets a Level object and runs it. Engine would have its own collision and physics system, all hard coded. Now, what if at some point in a level, I want the player to enter a mini-game with different rules? How do I morph the Engine class to support these sub-systems without having to deal with their code all the time (as in: if(regular game) ... else if(mini game) ...)? And what if I want an intro animation at the start of a level, and I want the player to be able to assume control of his character once the animation ends, do I implement the animation into the Engine class itself? Or maybe I need to run another class, CutScene, and when it ends, it calls Engine and starts the level? What if I want to add a dialogue system, where at the start of each level there's a short dialogue and the player can't control his character, and once it ends, he can? Would I then run the dialogue code inside the Engine code? Maybe these sub-systems should all be scripted? I don't know anything about scripting, is it necessary for this kind of situation? Any help would be appreciated.

    Read the article

  • Ubuntu 12.10 won't display properly after kernel upgrade

    - by Daniel
    After updating a system today, Ubuntu's doesn't display correctly. The desktop now looks like this. It was working properly before. I had to use the terminal to run synaptic package manager, so I could view the update history; which is as follows: Commit Log for Wed Nov 7 11:50:36 2012 Upgraded the following packages: linux-image-generic (3.5.0.17.19) to 3.5.0.18.21 Installed the following packages: linux-image-3.5.0-18-generic (3.5.0-18.29) linux-image-extra-3.5.0-18-generic (3.5.0-18.29) Prior to this issue, the last active driver was nvidia-current-updates, version 304.51. I tried using the nvidia-current driver, version 304.51.really.304.43 instead, but the problem persists. I tried running nvidia-settings from terminal, so I could try configuring something, but the application informs that the Nvidia driver is not being used. As the x-swat repository has nothing for Quantal, I desperately used the unstable x-edgers repository & upgraded, but to no avail; so I purged it. The display should normally be full HD, but the only available resolutions now are 1024x768(4:3) and 800x600(4:3). The system is Dell XPS-L702X, with NVIDIA GeForce GT 555M, and 17" screen. How can I fix this problem? Update: I tried using the Nouveau third-party driver & this fixes the issue. However, if you have any idea how to get the Nvidia drivers working properly with the latest kernel, please share; as I've noticed some videos playing very slowly on the system, though I'm not sure exactly why.

    Read the article

< Previous Page | 404 405 406 407 408 409 410 411 412 413 414 415  | Next Page >