Search Results

Search found 16598 results on 664 pages for 'device center'.

Page 409/664 | < Previous Page | 405 406 407 408 409 410 411 412 413 414 415 416  | Next Page >

• No network adapter drivers after Windows re-install

  - by Arno

  This is a pretty basic question. I got a PC (Packard Bell Easynote TK11-BZ-010BE) that had linux on it, so I thought, just delete the partition and its alright. Well, it wasn't. I went into grub recovery and couldn't do anything, so I re-installed windows again. Now the problem is that everything works expect my network adapter. When I go to device manager, I get that there aren't any driver's for it installed. But without internet, I can't install the so called driver finders. How should I solve this?

  Read the article

• Thinkpad Bluetooth turns itself on upon restart/hibernate

  - by Traveling Tech Guy

  I have a T400 with Windows 7 64bit. About 3 weeks ago, the Lenovo update pushed a Bluetooth update that added a 2.1 driver and device experience. Since then, my bluetooth turns itself on whenever the OS comes up (full restarts as well as waking from hibernation). I can turn it of using the <Fn>+<F5> Radio menu, but it just turns itself on again the next time. If I forget to turn it off, it just eats my battery that much faster.I've been scouring the web and couldn't find similar occurrences. Is this a hardware issue, a BIOS issue (although no reference to BT in any of the BIOS menus), a driver issue or (shudder) a user issue? Thanks for your help.

  Read the article

• How to convert dvr-ms file in Ubuntu to DVD?

  - by edmicman

  I have a .dvr-ms file of a recorded TV show from my Vista Media Center. I would like to burn this to a DVD that can play on any standalone DVD player. My main PC that I want to use to convert it to a DVD format is running Ubuntu 10.04. I am able to play the file in Ubuntu using VLC (which surprised me) so I'm assuming I have what I need to decode it. I guess my questions are: What format do I need to convert this file to so that I could burn it to a playable DVD? I started to go through VLC's conversion process and chose I think H264 and AAC or something, and it gave a message about not having an AAC encoder. I'll look into that some more tonight, but is that something I could then burn to a DVD? Thanks for any help!

  Read the article

• Root partition full? CentOS

  - by Joao Heleno

  Hi! I'm running CentOS 5.4 and my / is full. I wanted to install gparted but in order to do that I must install Priorities and it's when I get an error saying / is full so I can't go forward. Here's some output: fdisk -l Disk /dev/sda: 250.0 GB, 250000000000 bytes 255 heads, 63 sectors/track, 30394 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 2611 20972826 83 Linux /dev/sda2 2612 3251 5140800 82 Linux swap / Solaris /dev/sda3 3252 30394 218026147+ 83 Linux df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 20315812 19365152 0 100% / /dev/sda3 211196248 49228164 151066780 25% /home tmpfs 1552844 0 1552844 0% /dev/shm I'm not using LVM. Please advise. Thanks

  Read the article

• Windows 7 Bluetooth Configuration

  - by ahsteele

  I have Bluetooth installed in my laptop. The Bluetooth is enabled according to the status light. However, I do not see Bluetooth listed in device manager or have a control panel option for it. A scan for new hardware doesn't turn up Bluetooth. Nor are any devices listed with a Yellow Exclamation Point. I do have three USB Hubs Listed as "Generic USB Hub." There is no Bluetooth icon in the notification area and Bluetooth is not listed under Devices and Printers. What am I missing?

  Read the article

• SCCM deploy from VMware XP image

  - by HannesFostie

  We recently set up the latest version of SCCM and I managed to capture a .wim image from a virtual machine (build and capture task sequence). I want to use this .wim file to deploy winXP to different hardware, and therefor need to add device drivers to the task sequence. I created a driver package per laptop type, and deployed for the first time. However, I am getting a BSOD (0x00007B) which leads me to believe theres a problem with the storage drivers. After adjusting the task sequence to try and point to the mass storage drivers (which are applied at F6, I suppose) I do not get a list of compatible drivers (the list is empty). I looked around, and found some issues regarding hdc class drivers that are not recognized as mass storage drivers. The workaround suggested changing the INF file to make the driver a SCSIAdapter class driver, and importing these again, but to no avail. The list remains empty. Any help is much appreciated

  Read the article

• Windows 7 trying to turn off UAC every time Windows starts

  - by Mehper C. Palavuzlar

  I have strange problem on my HP laptop. This began to happen recently. Whenever I start my machine, Windows 7 Action Center displays the following warning: You need to restart your computer for UAC to be turned off. I never disable UAC, but obviously some process or virus (I'm not sure, only guessing) causes this. As soon as I get this warning, I head for the UAC settings, and re-enable UAC to dismiss this warning. This is a bothersome situation as I really don't know what causes the problem. I have run a full scan on the computer for any probable virus activity, but TrendMicro OfficeScan said that no viruses have been found. There are no other strange incidents on the machine. Everthing works fine except this bizarre incident. How can I learn what process is trying to turn off UAC? What way should I follow to overcome this problem?

  Read the article

• VGA no signal on LCD monitor attached to laptop

  - by Paul

  I bought a new Asus vh242h LCD monitor for use with my lenevo T60 laptop running XP professional. Display info under control panel says "Intel(R) 945GM Express Chipset Family". I am connecting via VGA. When I connect the monitor I get "VGA no signal" and the monitor screen stays blank. I have selected the monitor as the display device on the laptop. The information on the monitor displays the correct screen resolution from the laptop, so the monitor is communicating in some way with the laptop. I've successfully tried the monitor with my Dell inspirion 1525 running Windows Vista. I've change the VGA cable to one I know works. Tried different resolutions. I cannot find and specific drivers on the internet for this monitor, so I assume it should work with Plug and Play. Does anyone know what the problem could be?

  Read the article

• dell vostro 1310 with nVidia 8400M display problem

  - by Arthur

  Hi everyone, i hope someone can help me with this problem. I have a Dell vostro 1310 Laptop with 32 bit vista and a 8400M nVidia chip. Recently i have noticed performance issues when my girlfriend was playing Sims 3, and then one day i turned it on and all i got was a thick white line at the bottom of the screen. i heard the OS start up so automatically i thought it was a damaged screen, but i had doubts so i plugged it into an external display via the vga port. it worked but everything appart worm the OS choice menu looks distorted beyond belief. even the bios screen had multicoloured lines running down the screen. The resolution is non existant, the screen only shows a 256 colour pallette and is heavily distorted. i barely managed to get to the device manager where i found the gfx card with an exclamation mark. does anybody have suggestions? should i buy a new mobo or are repairs possible? thanks in advance

  Read the article

• IBM x260m won't boot from PCI SATA card

  - by syrenity

  Hi. We ghosted our old Windows 2003 drive to a new 1TB one, and connected through new PCI SATA card. The x260m server fails to boot with error 1962: "Boot sector not found." When we connect the drive directly to motherboard, it boots fine, so the problem is probably in getting BIOS to boot from the SATA card. Has anyone encountered and solved such issue? EDIT: We tried disabling the on-board Sata controller (Hostraid/SAS?), but there is no such option - only enable, enhanced and compatible. Tried also to chance boot device priority to all possible choices - no luck. Thanks in advance!

  Read the article

• Does Windows 7 support multiple simultaneous nVidia graphics cards with different drivers?

  - by mckenzieg1

  On one of my dev machines at work (currently running XP), I have two nVidia graphics cards: Quadro NVS 440 (my original card, for my three primary monitors) GeForce GTX 275 (just added, for CUDA development) I can get both cards to work OK by installing the latest GeForce drivers, but I get some annoying-but-not-crippling display artifacts on the Quadro's screens (mostly scattered black rectanges where repainting fails for a few bits of UI in certain applications). Under XP, this seems to be the best I can do. I can use Device Manager to supposedly install different nVidia drivers for the two cards (the latest Quadro drivers for the NVS, the latest GeForce drivers for the GTX), but I actually end up with the same driver for both, because the driver dlls all have the same names and get installed on top of one another in the system directory. I have read that Win7 has a new video driver architecture that better supports multiple heterogeneous cards. Does anyone know if that will handle my scenario? If so, it will give me a compelling reason to get that machine on Win7 ASAP.

  Read the article

• One quarter of screen corrupted on MacBook Pro

  - by danyal

  I have a problem with my MacBook Pro's screen - here's a video: http://yfrog.com/4wm63z For those who prefer words, if you divide the screen vertically into 4 columns, the second column is corrupted (flickering, and discoloured, usually with yellow). I took it to an Apple store and they said it could be the screen or the logic board, neither of which will be cheap to replace. However, occasionally this problem will completely go away. So before I part with my cash, or decide to turn this into an overpriced media center for my TV... could the problem be a loose cable, or something else cheaper to fix?

  Read the article

• Avoiding double NAT with PPPoA connection

  - by user498429

  I've got an ASUS RT-N56U wending its way to me and have been thinking about how to set this up on my home network. I currently have a Netgear DG634g V5 and was hoping to use this device as a modem only, with everything else being done by the router. Problem is, my ISP uses PPPoA and the asus seems only to support PPPoE. I'm aware that a double NAT configuration should be avoided and I've seen some instructions here: http://www.tomshardware.co.uk/forum/33700-17-ultimate-modem-router-setup-thread Specifically, I was going to follow the guidance in the section entitled "Chaining Two Networks Together In a Cascading Fashion (Modem handles PPPoA)". That seems like it could work. However, is this a double NAT configuration or even a good way to do it? Would UPnP still work? The other option, I understand, is to buy the Draytek Vigor 120 but I'd ideally like to avoid the cost of that if its not necessary.

  Read the article

• Dye Sub printer with specific prints remaining - can I command-line query this?

  - by Jason N

  Hey, I've got a Sony Dye-Sub printer that holds ink/paper sets - i.e. a very certain amount of ink and paper for ~200 prints. This information is available to me from within Control Panel Printers Preferences Printer Device Information (i.e. current 189 remaining prints). Any way I can perhaps get this information from the command line? I'd like to write a little program to tell me when the number of prints gets low (i.e. < 20), rather than suffer the annoying Windows "run out of paper" popup. I've found the Windows VBScript print utilities, but can't seem to find the request I need for this. Any suggestions? Jason

  Read the article

• Can't find generic USB audio driver for a Samson COU1 USB microphone

  - by marcipollo

  I am unable to use a Samson USB CO1U microphone on a PC running XP, SP3. When I plug it into the USB port, Windows generates the sound indicating that it has found new hardware, and the green LED on the mic lights. But, it does not work, and the device manager reports that it cannot find a driver after searching. The same mic works on a Vista machine. Samson has no driver on their Web site, and insists that the generic audio driver in Windows should work. (http://www.samsontech.com/PRODUCTS/productpage.cfm?prodID=1810). I cannot find a generic USB audio driver at Microsoft.com. Can anyone help? Larry

  Read the article

• HP Cue-Scanning Flow component freezes

  - by Nathan Fellman

  I am trying to scan with an HP network scanner (actually E6500 all-in-one). Whenever I try to scan, it starts up a flash screen with HP Scanning written all over it, which proceeds to do nothing. Digging in, I found that the process that gets stuck is hpqkygrp.exe, aka "HP CUE-Scanning Flow Component". This happened when I tried scanning from onenote or from the HP Solution Center. However, it seems that scanning from Windows' Fax and Scan utility works fine. As a (probably related) side-note, scanning directly from the scanner (using the buttons on its panel) doesn't work either. How can I keep this process from getting stuck?

  Read the article

• Format External HD on Airport Extreme Base Station?

  - by David.Chu.ca

  I just got an Airport Extreme Base Station. I am planning to use this one replace my current Linksys router. This works fine. My another purpose of getting this device is to use its USB port to connect to several external HDs as my backup Time Machine. I can see one 500GB HD through Airport Base Station. However, I cannot format it by using Disk Utility. What I did is to connect the HD to my iMac directly first and then clean and format the disk by Disk Utility application. Then I move the HD to the Airport Base Station. After that I can designate the HD as my Time Machine destination. Is there any way to format the HD connected to Airport Base Station? Any issues to use an external HD through Airport Base Station for Time Machine backups?

  Read the article

• backup software that ignores user rights

  - by Chris

  Hi, As a computer technician I have to reinstall systems allmost daily (when it can't be repaired ;-)) My problem is that I recover user files by hand and a external mounting device. Most of the time it works fine, but also weekly I have systems with passwords and personal files which are often not sucessfull recovered. I know you can change owner, but when people have 30 GB's af data, my backup computer works for ages to change the rights. Can anyone think of software (commercial is no problem) which does the following: * backup user data without having user rights troubles * have a option to choose what to backup (email accounts, documents, etc, etc) even when it's externaly mounted, in short, it reconizes the folder structure) * Works on different OS's like XP, Vista, W7

  Read the article

• Need to upgrade DDR2 RAM on HP Desktop

  - by jds

  I have this HP Pavilion Desktop. As you can see, that page says the memory speed supported is PC2-4200. It currently has a 512 MB stick - CPU-Z Screenshots: hxxp://i41.tinypic.com/j5clj6.jpg and hxxp://i39.tinypic.com/20tldlc.jpg However, a crucial.com scan gives a slightly different report - hxxp://crucial.com/systemscanner/viewscanbyid.aspx?id=5718CFE831D926C3 It says the system can support PC2-5300 memory. So my question is which one should I trust? I want to upgrade the computer's ram to 2 GB (the maximum supported), because XP Media Center is giving me problems and I will install Windows 7 on this. PC2-6400 is the most common DDR2 memory I have been able to find here in the market. Will it cause any problems if I install 2 × 1 GB PC2-6400 DDR2 memory sticks (in dual channel) in this computer, (afaik, it will just run at the lower speed of 533 MHz, or whatever the motherboard supports), or do I absolutely need to get PC2-4200 sticks?

  Read the article

• Juniper J4350 out of order

  - by Benjamin Baron

  I have got two (2) Juniper routers J4350 that are out of order : All the interfaces are down (leds on the interfaces don't ligthen, ping dosen't respond) No output on the console port (even when booting) I've tried to reset the router (holding the RESET CONFIG button on the front panel during 15 seconds) and nothing happened, even while booting the device I've opened the router to check the fans. I've removed some dust and nothing has changed. I wanted to precise that the leds on the front panel are all on: The POWER led is green The STATUS led is red The ALARM led is on and is orange The HA (High Availablity) is on and orange as well I have found nothing on the Internet to solve this problem... Thank you for helping me :)

  Read the article

• 2nd/3rd version of wireless network appears

  - by neildeadman

  I replaced an old SpeedTouch ADSL router with a Netgear DG384 that I have and whilst doing so decided to change the wireless password. For this question assume my wireless network SSID is DeddersHome. On my netbook and macbook pro (running Win7) it won't connect to the Internet. When I hover over the tray icon for wireless it says "DeddersHome 2" and "DeddersHome 3" have no internet connection. What are these additional wireless networks? I can't see them in the wireless network list on any wireless device I have. Wired connections and wireless through my iPhone work fine. I saw this before with the SpeedTouch, but it just went away!! I also have one Apple AirPort Express connected to the wireless network which my Xbox is connected to (wired). This all worked before... I am going to remove AirPort to see if it is this causing the problem, but thought I'd ask the question to give it time for an answer whilst I continue to search. Cheers

  Read the article

• Easy way to restrict permissions in an elementary school computer lab?

  - by Andrew

  I'm putting together an elementary school computer lab. I have nine winxp pro machines that are not networked and do not have internet access (no money to do either). I've created separate student and admin accounts, and have the students set as limited users. However, I'm interested in further restricting their permissions. I want to make it such that they cannot: -delete any files, even just from their own profile -rename any files -move around the icons on the desktop -change any display settings -access a usb device without a password (they bring in their own from home which are chock-full of viruses) Oh, one last thing, they still have to be able to save word documents. Is this even possible? I can download software, but, like I said: no internet, no server.

  Read the article

• Network trials and tribulations

  - by MauiWowie

  Hi, I am in the process of setting up a small (two PC's, both running Windows 7) network using a D-link DI-604 router (which acts only as hub, it's not set up in any way). In the Network and 'Sharing Center' in 'Control Panel' I clicked 'Set up a New (Connection or) Network'. All went well up until the moment I attempted to connect one PC with the other (in the 'Connect' dialog I entered the other PC's IP, no pwd). I can use both PC's to connect to and browse the net though, so the router/hub does not seem to be the problem. And I must have done something right, because the other computer shows up in the 'Network Map'. Any and all help is much appreciated!

  Read the article

• routing traffic between two network cards through firewall

  - by RubyFreak

  I'm trying to test a network device (firewall) using a Linux box, with two network cards, one interface connected to the WAN zone and another interface to LAN zone. The configuration is similar with that |ETH0| <-> | FW | <-> ETH1 So from both interfaces I'm able to ping the respective firewall interface. But i'm not able to fire something like: ping -I eth0 ip.from.eth1 and to get any answer. Is that possible or should the linux network namespace solution or user level tcp stacks (VMs are out of question)

  Read the article

• Using a PC + headset as a telephone without VOIP

  - by user76782

  I'm trying to find a way to realize a decentralized callcenter, so that the callcenter agents can talk from their home office with just a PC + headset. The big challange is that some of the agents have very low bandwith and the quality with VOIP is too bad. So my question is: What other solutions are possible when VOIP is not a option? What exactly do I need to do if I try to achieve this with for example Landline/PBX or GSM? (e.g. Which software do I need to install? Which device do I need?)

  Read the article

< Previous Page | 405 406 407 408 409 410 411 412 413 414 415 416  | Next Page >