app dev - Page 411 - Developer IT

Submitting an iPad for final review

- by harekam_taj

Hello, My initial app for iPad was approved, how do I go about submitting for final review. DO I create another app in itunesconnect or update the binary of the initial app review?

What Android version to target?

I'm about to write my first Android app. It's a fairly basic app that doesn't use any special features beyond being able to schedule notifications and read/write image files to the device's local storage. Reaching the broadest audience is my top priority. If I target Android 1.5, is the app guaranteed to run fine all the way up to ICS? Should I target Android 2.1, which seems to be the new baseline for common phones in use? Since the app is fairly basic, if I target ICS, would it run on versions going all the way back to 2.1? Maybe this is a stupid question.

Read the article

rewrite condition for directory along with file

- by RHR

Any one please help me.I am new to .htaccess I want to check the following condition RewriteCond : IF !index.html AND !app/facebookapp/{[a-zA-Z0-9-/]}.html RewriteRule : ..... My code is RewriteCond %{REQUEST_URI} !index\.html RewriteCond %{REQUEST_URI} app/facebookapp/^([a-zA-Z0-9-/]+).html$ RewriteRule ...... its not working And one more question if the request url is header.html RewriteCond %{REQUEST_URI} header.html$ RewriteRule ^([a-zA-Z0-9-/]+).html$ position.php?position=$1 [L] $l will return header. if the request url is app/facebookapp/header.html we write the same above condition $l will return app/facebookapp/header.my question is how to get only the filename ?? thanks

Read the article

vb6 Open File For Append issue Path Not Found

- by Schwayday

Open App.Path & "\Folder\" & str(0) For Output Seems to get a path not found however if directly before that I do MsgBox App.Path & "\Folder\" & str(0) It Provides the correct directory/filename that I want and if I replace that string with the direct path in quotes it works fine however that won't be very good for other users of my app :( Anyone know why this doesn't work?

Read the article

iPhone: trouble with wrong credentials

- by user331396

I am writing an iPhone App that uses a HTTPS/SOAP service which needs user credentials. After I change the password used for these credentials from a valid to an invalid one I still get a valid response from the service, as if the password was never changed. When I restart the app (with the invalid password) the app immediately receives the expected '401' message. Any hints what I might left out to code? Thx :)

Read the article

What's the recommended way of create Android libraries for use in apps?

- by mabutt

I have an app, say MyApp Free. I want to create MyApp Pro which I can charge for that has some additional functionality. The obvious way is to have a library that contains almost all my app code, then two Android app projects for the Free and Pro versions which reference that library. Suggestions?

Read the article

Building applications with WPF, MVVM and Prism(aka CAG)

- by skjagini

In this article I am going to walk through an application using WPF and Prism (aka composite application guidance, CAG) which simulates engaging a taxi (cab). The rules are simple, the app would have3 screens A login screen to authenticate the user An information screen. A screen to engage the cab and roam around and calculating the total fare Metered Rate of Fare The meter is required to be engaged when a cab is occupied by anyone $3.00 upon entry $0.35 for each additional unit The unit fare is: one-fifth of a mile, when the cab is traveling at 6 miles an hour or more; or 60 seconds when not in motion or traveling at less than 12 miles per hour. Night surcharge of $.50 after 8:00 PM & before 6:00 AM Peak hour Weekday Surcharge of $1.00 Monday - Friday after 4:00 PM & before 8:00 PM New York State Tax Surcharge of $.50 per ride. Example: Friday (2010-10-08) 5:30pm Start at Lexington Ave & E 57th St End at Irving Pl & E 15th St Start = $3.00 Travels 2 miles at less than 6 mph for 15 minutes = $3.50 Travels at more than 12 mph for 5 minutes = $1.75 Peak hour Weekday Surcharge = $1.00 (ride started at 5:30 pm) New York State Tax Surcharge = $0.50 Before we dive into the app, I would like to give brief description about the framework. If you want to jump on to the source code, scroll all the way to the end of the post. MVVM MVVM pattern is in no way related to the usage of PRISM in your application and should be considered if you are using WPF irrespective of PRISM or not. Lets say you are not familiar with MVVM, your typical UI would involve adding some UI controls like text boxes, a button, double clicking on the button, generating event handler, calling a method from business layer and updating the user interface, it works most of the time for developing small scale applications. The problem with this approach is that there is some amount of code specific to business logic wrapped in UI specific code which is hard to unit test it, mock it and MVVM helps to solve the exact problem. MVVM stands for Model(M) – View(V) – ViewModel(VM), based on the interactions with in the three parties it should be called VVMM, MVVM sounds more like MVC (Model-View-Controller) so the name. Why it should be called VVMM: View – View Model - Model WPF allows to create user interfaces using XAML and MVVM takes it to the next level by allowing complete separation of user interface and business logic. In WPF each view will have a property, DataContext when set to an instance of a class (which happens to be your view model) provides the data the view is interested in, i.e., view interacts with view model and at the same time view model interacts with view through DataContext. Sujith, if view and view model are interacting directly with each other how does MVVM is helping me separation of concerns? Well, the catch is DataContext is of type Object, since it is of type object view doesn’t know exact type of view model allowing views and views models to be loosely coupled. View models aggregate data from models (data access layer, services, etc) and make it available for views through properties, methods etc, i.e., View Models interact with Models. PRISM Prism is provided by Microsoft Patterns and Practices team and it can be downloaded from codeplex for source code, samples and documentation on msdn. The name composite implies, to compose user interface from different modules (views) without direct dependencies on each other, again allowing loosely coupled development. Well Sujith, I can already do that with user controls, why shall I learn another framework? That’s correct, you can decouple using user controls, but you still have to manage some amount of coupling, like how to do you communicate between the controls, how do you subscribe/unsubscribe, loading/unloading views dynamically. Prism is not a replacement for user controls, provides the following features which greatly help in designing the composite applications. Dependency Injection (DI)/ Inversion of Control (IoC) Modules Regions Event Aggregator Commands Simply put, MVVM helps building a single view and Prism helps building an application using the views There are other open source alternatives to Prism, like MVVMLight, Cinch, take a look at them as well. Lets dig into the source code. 1. Solution The solution is made of the following projects Framework: Holds the common functionality in building applications using WPF and Prism TaxiClient: Start up project, boot strapping and app styling TaxiCommon: Helps with the business logic TaxiModules: Holds the meat of the application with views and view models TaxiTests: To test the application 2. DI / IoC Dependency Injection (DI) as the name implies refers to injecting dependencies and Inversion of Control (IoC) means the calling code has no direct control on the dependencies, opposite of normal way of programming where dependencies are passed by caller, i.e inversion; aside from some differences in terminology the concept is same in both the cases. The idea behind DI/IoC pattern is to reduce the amount of direct coupling between different components of the application, the higher the dependency the more tightly coupled the application resulting in code which is hard to modify, unit test and mock. Initializing Dependency Injection through BootStrapper TaxiClient is the starting project of the solution and App (App.xaml) is the starting class that gets called when you run the application. From the App’s OnStartup method we will invoke BootStrapper. namespace TaxiClient { /// <summary> /// Interaction logic for App.xaml /// </summary> public partial class App : Application { protected override void OnStartup(StartupEventArgs e) { base.OnStartup(e); (new BootStrapper()).Run(); } } } BootStrapper is your contact point for initializing the application including dependency injection, creating Shell and other frameworks. We are going to use Unity for DI and there are lot of open source DI frameworks like Spring.Net, StructureMap etc with different feature set and you can choose a framework based on your preferences. Note that Prism comes with in built support for Unity, for example we are deriving from UnityBootStrapper in our case and for any other DI framework you have to extend the Prism appropriately namespace TaxiClient { public class BootStrapper: UnityBootstrapper { protected override IModuleCatalog CreateModuleCatalog() { return new ConfigurationModuleCatalog(); } protected override DependencyObject CreateShell() { Framework.FrameworkBootStrapper.Run(Container, Application.Current.Dispatcher); Shell shell = new Shell(); shell.ResizeMode = ResizeMode.NoResize; shell.Show(); return shell; } } } Lets take a look into FrameworkBootStrapper to check out how to register with unity container. namespace Framework { public class FrameworkBootStrapper { public static void Run(IUnityContainer container, Dispatcher dispatcher) { UIDispatcher uiDispatcher = new UIDispatcher(dispatcher); container.RegisterInstance<IDispatcherService>(uiDispatcher); container.RegisterType<IInjectSingleViewService, InjectSingleViewService>( new ContainerControlledLifetimeManager()); . . . } } } In the above code we are registering two components with unity container. You shall observe that we are following two different approaches, RegisterInstance and RegisterType. With RegisterInstance we are registering an existing instance and the same instance will be returned for every request made for IDispatcherService and with RegisterType we are requesting unity container to create an instance for us when required, i.e., when I request for an instance for IInjectSingleViewService, unity will create/return an instance of InjectSingleViewService class and with RegisterType we can configure the life time of the instance being created. With ContaienrControllerLifetimeManager, the unity container caches the instance and reuses for any subsequent requests, without recreating a new instance. Lets take a look into FareViewModel.cs and it’s constructor. The constructor takes one parameter IEventAggregator and if you try to find all references in your solution for IEventAggregator, you will not find a single location where an instance of EventAggregator is passed directly to the constructor. The compiler still finds an instance and works fine because Prism is already configured when used with Unity container to return an instance of EventAggregator when requested for IEventAggregator and in this particular case it is called constructor injection. public class FareViewModel:ObservableBase, IDataErrorInfo { ... private IEventAggregator _eventAggregator; public FareViewModel(IEventAggregator eventAggregator) { _eventAggregator = eventAggregator; InitializePropertyNames(); InitializeModel(); PropertyChanged += OnPropertyChanged; } ... 3. Shell Shells are very similar in operation to Master Pages in asp.net or MDI in Windows Forms. And shells contain regions which display the views, you can have as many regions as you wish in a given view. You can also nest regions. i.e, one region can load a view which in itself may contain other regions. We have to create a shell at the start of the application and are doing it by overriding CreateShell method from BootStrapper From the following Shell.xaml you shall notice that we have two content controls with Region names as ‘MenuRegion’ and ‘MainRegion’. The idea here is that you can inject any user controls into the regions dynamically, i.e., a Menu User Control for MenuRegion and based on the user action you can load appropriate view into MainRegion. <Window x:Class="TaxiClient.Shell" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:Regions="clr-namespace:Microsoft.Practices.Prism.Regions;assembly=Microsoft.Practices.Prism" Title="Taxi" Height="370" Width="800"> <Grid Margin="2"> <ContentControl Regions:RegionManager.RegionName="MenuRegion" HorizontalAlignment="Stretch" VerticalAlignment="Stretch" HorizontalContentAlignment="Stretch" VerticalContentAlignment="Stretch" /> <ContentControl Grid.Row="1" Regions:RegionManager.RegionName="MainRegion" HorizontalAlignment="Stretch" VerticalAlignment="Stretch" HorizontalContentAlignment="Stretch" VerticalContentAlignment="Stretch" />  </Grid> </Window> 4. Modules Prism provides the ability to build composite applications and modules play an important role in it. For example if you are building a Mortgage Loan Processor application with 3 components, i.e. customer’s credit history, existing mortgages, new home/loan information; and consider that the customer’s credit history component involves gathering data about his/her address, background information, job details etc. The idea here using Prism modules is to separate the implementation of these 3 components into their own visual studio projects allowing to build components with no dependency on each other and independently. If we need to add another component to the application, the component can be developed by in house team or some other team in the organization by starting with a new Visual Studio project and adding to the solution at the run time with very little knowledge about the application. Prism modules are defined by implementing the IModule interface and each visual studio project to be considered as a module should implement the IModule interface. From the BootStrapper.cs you shall observe that we are overriding the method by returning a ConfiguratingModuleCatalog which returns the modules that are registered for the application using the app.config file and you can also add module using code. Lets take a look into configuration file. <?xml version="1.0"?> <configuration> <configSections> <section name="modules" type="Microsoft.Practices.Prism.Modularity.ModulesConfigurationSection, Microsoft.Practices.Prism"/> </configSections> <modules> <module assemblyFile="TaxiModules.dll" moduleType="TaxiModules.ModuleInitializer, TaxiModules" moduleName="TaxiModules"/> </modules> </configuration> Here we are adding TaxiModules project to our solution and TaxiModules.ModuleInitializer implements IModule interface 5. Module Mapper With Prism modules you can dynamically add or remove modules from the regions, apart from that Prism also provides API to control adding/removing the views from a region within the same module. Taxi Information Screen: Engage the Taxi Screen: The sample application has two screens, ‘Taxi Information’ and ‘Engage the Taxi’ and they both reside in same module, TaxiModules. ‘Engage the Taxi’ is again made of two user controls, FareView on the left and TotalView on the right. We have created a Shell with two regions, MenuRegion and MainRegion with menu loaded into MenuRegion. We can create a wrapper user control called EngageTheTaxi made of FareView and TotalView and load either TaxiInfo or EngageTheTaxi into MainRegion based on the user action. Though it will work it tightly binds the user controls and for every combination of user controls, we need to create a dummy wrapper control to contain them. Instead we can apply the principles we learned so far from Shell/regions and introduce another template (LeftAndRightRegionView.xaml) made of two regions Region1 (left) and Region2 (right) and load FareView and TotalView dynamically. To help with loading of the views dynamically I have introduce an helper an interface, IInjectSingleViewService, idea suggested by Mike Taulty, a must read blog for .Net developers. using System; using System.Collections.Generic; using System.ComponentModel; namespace Framework.PresentationUtility.Navigation { public interface IInjectSingleViewService : INotifyPropertyChanged { IEnumerable<CommandViewDefinition> Commands { get; } IEnumerable<ModuleViewDefinition> Modules { get; } void RegisterViewForRegion(string commandName, string viewName, string regionName, Type viewType); void ClearViewFromRegion(string viewName, string regionName); void RegisterModule(string moduleName, IList<ModuleMapper> moduleMappers); } } The Interface declares three methods to work with views: RegisterViewForRegion: Registers a view with a particular region. You can register multiple views and their regions under one command. When this particular command is invoked all the views registered under it will be loaded into their regions. ClearViewFromRegion: To unload a specific view from a region. RegisterModule: The idea is when a command is invoked you can load the UI with set of controls in their default position and based on the user interaction, you can load different contols in to different regions on the fly. And it is supported ModuleViewDefinition and ModuleMappers as shown below. namespace Framework.PresentationUtility.Navigation { public class ModuleViewDefinition { public string ModuleName { get; set; } public IList<ModuleMapper> ModuleMappers; public ICommand Command { get; set; } } public class ModuleMapper { public string ViewName { get; set; } public string RegionName { get; set; } public Type ViewType { get; set; } } } 6. Event Aggregator Prism event aggregator enables messaging between components as in Observable pattern, Notifier notifies the Observer which receives notification it is interested in. When it comes to Observable pattern, Observer has to unsubscribes for notifications when it no longer interested in notifications, which allows the Notifier to remove the Observer’s reference from it’s local cache. Though .Net has managed garbage collection it cannot remove inactive the instances referenced by an active instance resulting in memory leak, keeping the Observers in memory as long as Notifier stays in memory. Developers have to be very careful to unsubscribe when necessary and it often gets overlooked, to overcome these problems Prism Event Aggregator uses weak references to cache the reference (Observer in this case) and releases the reference (memory) once the instance goes out of scope. Using event aggregator is very simple, declare a generic type of CompositePresenationEvent by inheriting from it. using Microsoft.Practices.Prism.Events; using TaxiCommon.BAO; namespace TaxiCommon.CompositeEvents { public class TaxiOnMoveEvent:CompositePresentationEvent<TaxiOnMove> { } } TaxiOnMove.cs includes the properties which we want to exchange between the parties, FareView and TotalView. using System; namespace TaxiCommon.BAO { public class TaxiOnMove { public TimeSpan MinutesAtTweleveMPH { get; set; } public double MilesAtSixMPH { get; set; } } } Lets take a look into FareViewodel (Notifier) and how it raises the event. Here we are raising the event by getting the event through GetEvent<..>() and publishing it with the payload private void OnAddMinutes(object obj) { TaxiOnMove payload = new TaxiOnMove(); if(MilesAtSixMPH != null) payload.MilesAtSixMPH = MilesAtSixMPH.Value; if(MinutesAtTweleveMPH != null) payload.MinutesAtTweleveMPH = new TimeSpan(0,0,MinutesAtTweleveMPH.Value,0); _eventAggregator.GetEvent<TaxiOnMoveEvent>().Publish(payload); ResetMinutesAndMiles(); } And TotalViewModel(Observer) subscribes to notifications by getting the event through GetEvent<..>() namespace TaxiModules.ViewModels { public class TotalViewModel:ObservableBase { .... private IEventAggregator _eventAggregator; public TotalViewModel(IEventAggregator eventAggregator) { _eventAggregator = eventAggregator; ... } private void SubscribeToEvents() { _eventAggregator.GetEvent<TaxiStartedEvent>() .Subscribe(OnTaxiStarted, ThreadOption.UIThread,false,(filter) => true); _eventAggregator.GetEvent<TaxiOnMoveEvent>() .Subscribe(OnTaxiMove, ThreadOption.UIThread, false, (filter) => true); _eventAggregator.GetEvent<TaxiResetEvent>() .Subscribe(OnTaxiReset, ThreadOption.UIThread, false, (filter) => true); } ... private void OnTaxiMove(TaxiOnMove taxiOnMove) { OnMoveFare fare = new OnMoveFare(taxiOnMove); Fares.Add(fare); SetTotalFare(new []{fare}); } .... 7. MVVM through example In this section we are going to look into MVVM implementation through example. I have all the modules declared in a single project, TaxiModules, again it is not necessary to have them into one project. Once the user logs into the application, will be greeted with the ‘Engage the Taxi’ screen which is made of two user controls, FareView.xaml and TotalView.Xaml. As you can see from the solution explorer, each of them have their own code behind files and ViewModel classes, FareViewMode.cs, TotalViewModel.cs Lets take a look in to the FareView and how it interacts with FareViewModel using MVVM implementation. FareView.xaml acts as a view and FareViewMode.cs is it’s view model. The FareView code behind class namespace TaxiModules.Views { /// <summary> /// Interaction logic for FareView.xaml /// </summary> public partial class FareView : UserControl { public FareView(FareViewModel viewModel) { InitializeComponent(); this.Loaded += (s, e) => { this.DataContext = viewModel; }; } } } The FareView is bound to FareViewModel through the data context and you shall observe that DataContext is of type Object, i.e. the FareView doesn’t really know the type of ViewModel (FareViewModel). This helps separation of View and ViewModel as View and ViewModel are independent of each other, you can bind FareView to FareViewModel2 as well and the application compiles just fine. Lets take a look into FareView xaml file <UserControl x:Class="TaxiModules.Views.FareView" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:Toolkit="clr-namespace:Microsoft.Windows.Controls;assembly=WPFToolkit" xmlns:Commands="clr-namespace:Microsoft.Practices.Prism.Commands;assembly=Microsoft.Practices.Prism"> <Grid Margin="10" > .... <Border Style="{DynamicResource innerBorder}" Grid.Row="0" Grid.Column="0" Grid.RowSpan="11" Grid.ColumnSpan="2" Panel.ZIndex="1"/> <Label Grid.Row="0" Content="Engage the Taxi" Style="{DynamicResource innerHeader}"/> <Label Grid.Row="1" Content="Select the State"/> <ComboBox Grid.Row="1" Grid.Column="1" ItemsSource="{Binding States}" Height="auto"> <ComboBox.ItemTemplate> <DataTemplate> <TextBlock Text="{Binding Name}"/> </DataTemplate> </ComboBox.ItemTemplate> <ComboBox.SelectedItem> <Binding Path="SelectedState" Mode="TwoWay"/> </ComboBox.SelectedItem> </ComboBox> <Label Grid.Row="2" Content="Select the Date of Entry"/> <Toolkit:DatePicker Grid.Row="2" Grid.Column="1" SelectedDate="{Binding DateOfEntry, ValidatesOnDataErrors=true}" /> <Label Grid.Row="3" Content="Enter time 24hr format"/> <TextBox Grid.Row="3" Grid.Column="1" Text="{Binding TimeOfEntry, TargetNullValue=''}"/> <Button Grid.Row="4" Grid.Column="1" Content="Start the Meter" Commands:Click.Command="{Binding StartMeterCommand}" /> <Label Grid.Row="5" Content="Run the Taxi" Style="{DynamicResource innerHeader}"/> <Label Grid.Row="6" Content="Number of Miles <@6mph"/> <TextBox Grid.Row="6" Grid.Column="1" Text="{Binding MilesAtSixMPH, TargetNullValue='', ValidatesOnDataErrors=true}"/> <Label Grid.Row="7" Content="Number of Minutes @12mph"/> <TextBox Grid.Row="7" Grid.Column="1" Text="{Binding MinutesAtTweleveMPH, TargetNullValue=''}"/> <Button Grid.Row="8" Grid.Column="1" Content="Add Minutes and Miles " Commands:Click.Command="{Binding AddMinutesCommand}"/> <Label Grid.Row="9" Content="Other Operations" Style="{DynamicResource innerHeader}"/> <Button Grid.Row="10" Grid.Column="1" Content="Reset the Meter" Commands:Click.Command="{Binding ResetCommand}"/> </Grid> </UserControl> The highlighted code from the above code shows data binding, for example ComboBox which displays list of states has it’s ItemsSource bound to States property, with DataTemplate bound to Name and SelectedItem to SelectedState. You might be wondering what are all these properties and how it is able to bind to them. The answer lies in data context, i.e., when you bound a control, WPF looks for data context on the root object (Grid in this case) and if it can’t find data context it will look into root’s root, i.e. FareView UserControl and it is bound to FareViewModel. Each of those properties have be declared on the ViewModel for the View to bind correctly. To put simply, View is bound to ViewModel through data context of type object and every control that is bound on the View actually binds to the public property on the ViewModel. Lets look into the ViewModel code (the following code is not an exact copy of FareViewMode.cs, pasted relevant code for this section) namespace TaxiModules.ViewModels { public class FareViewModel:ObservableBase, IDataErrorInfo { public List<USState> States { get { return USStates.StateList; } } public USState SelectedState { get { return _selectedState; } set { _selectedState = value; RaisePropertyChanged(_selectedStatePropertyName); } } public DateTime? DateOfEntry { get { return _dateOfEntry; } set { _dateOfEntry = value; RaisePropertyChanged(_dateOfEntryPropertyName); } } public TimeSpan? TimeOfEntry { get { return _timeOfEntry; } set { _timeOfEntry = value; RaisePropertyChanged(_timeOfEntryPropertyName); } } public double? MilesAtSixMPH { get { return _milesAtSixMPH; } set { _milesAtSixMPH = value; RaisePropertyChanged(_distanceAtSixMPHPropertyName); } } public int? MinutesAtTweleveMPH { get { return _minutesAtTweleveMPH; } set { _minutesAtTweleveMPH = value; RaisePropertyChanged(_minutesAtTweleveMPHPropertyName); } } public ICommand StartMeterCommand { get { if(_startMeterCommand == null) { _startMeterCommand = new DelegateCommand<object>(OnStartMeter, CanStartMeter); } return _startMeterCommand; } } public ICommand AddMinutesCommand { get { if(_addMinutesCommand == null) { _addMinutesCommand = new DelegateCommand<object>(OnAddMinutes, CanAddMinutes); } return _addMinutesCommand; } } public ICommand ResetCommand { get { if(_resetCommand == null) { _resetCommand = new DelegateCommand<object>(OnResetCommand); } return _resetCommand; } } } private void OnStartMeter(object obj) { _eventAggregator.GetEvent<TaxiStartedEvent>().Publish( new TaxiStarted() { EngagedOn = DateOfEntry.Value.Date + TimeOfEntry.Value, EngagedState = SelectedState.Value }); _isMeterStarted = true; OnPropertyChanged(this,null); } And views communicate user actions like button clicks, tree view item selections, etc using commands. When user clicks on ‘Start the Meter’ button it invokes the method StartMeterCommand, which calls the method OnStartMeter which publishes the event to TotalViewModel using event aggregator and TaxiStartedEvent. namespace TaxiModules.ViewModels { public class TotalViewModel:ObservableBase { ... private IEventAggregator _eventAggregator; public TotalViewModel(IEventAggregator eventAggregator) { _eventAggregator = eventAggregator; InitializePropertyNames(); InitializeModel(); SubscribeToEvents(); } public decimal? TotalFare { get { return _totalFare; } set { _totalFare = value; RaisePropertyChanged(_totalFarePropertyName); } } .... private void SubscribeToEvents() { _eventAggregator.GetEvent<TaxiStartedEvent>().Subscribe(OnTaxiStarted, ThreadOption.UIThread,false,(filter) => true); _eventAggregator.GetEvent<TaxiOnMoveEvent>().Subscribe(OnTaxiMove, ThreadOption.UIThread, false, (filter) => true); _eventAggregator.GetEvent<TaxiResetEvent>().Subscribe(OnTaxiReset, ThreadOption.UIThread, false, (filter) => true); } private void OnTaxiStarted(TaxiStarted taxiStarted) { Fares.Add(new EntryFare()); Fares.Add(new StateTaxFare(taxiStarted)); Fares.Add(new NightSurchargeFare(taxiStarted)); Fares.Add(new PeakHourWeekdayFare(taxiStarted)); SetTotalFare(Fares); } private void SetTotalFare(IEnumerable<IFare> fares) { TotalFare = (_totalFare ?? 0) + TaxiFareHelper.GetTotalFare(fares); } .... } } TotalViewModel subscribes to events, TaxiStartedEvent and rest. When TaxiStartedEvent gets invoked it calls the OnTaxiStarted method which sets the total fare which includes entry fee, state tax, nightly surcharge, peak hour weekday fare. Note that TotalViewModel derives from ObservableBase which implements the method RaisePropertyChanged which we are invoking in Set of TotalFare property, i.e, once we update the TotalFare property it raises an the event that allows the TotalFare text box to fetch the new value through the data context. ViewModel is communicating with View through data context and it has no knowledge about View, helping in loose coupling of ViewModel and View. I have attached the source code (.Net 4.0, Prism 4.0, VS 2010) , download and play with it and don’t forget to leave your comments.

Read the article

500 Metro Style WP7 Icons

- by Bil Simser

I was inspired by The Noun Project, a project that offers up “Metro-style” icons in SVG format. The project is licensed under a public domain license and while it’s a great project, all of the content is in SVG format. Jon Galloway has a great post (from 2007) talking about the differences between SVG and XAML so I highly recommend that for some background. I thought it would be helpful to the WPF/Windows Phone 7/Silverlight community to provide the content in alternative formats for use in your applications. The Goods I’ve put together a package of the 500 icons (502 actually) in PNG, XAML and the original SVG format along with a couple of sample projects so you can see them in action. There’s a WPF desktop app: And a Windows Phone 7 app: Building It To get all the content first I wrote up a quick program to suck the original SVG files. Luckily they’re all in a common path just named 1.SVG, 2.SVG, and so on. Easy sleazy to grab the contents. Once I had 500 SVG files I used the latest copy of XamlTune, an open source CodePlex project that has a command line conversion tool to convert the directory of SVG files into XAML (the tool also created a PNG file of each SVG so that’s just icing on the cake). Conversions The conversion from SVG to XAML isn’t 100%. While you can just drop the content into a WPF app, it doesn’t work that way for WP7. There are just some small adjustments I made to each format so you’ll have to do the same. Follow the information below or refer to the sample applications. As a sample, here’s an icon we want to use: Here’s the original SVG file: <svg version="1.0" id="Layer_1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" x="0px" y="0px" width="100px" height="94.616px" viewBox="0 0 100 94.616" enable-background="new 0 0 100 94.616" xml:space="preserve"> <path d="M25.076,15.639c4.324,0.009,7.824-3.488,7.82-7.82C32.9,3.512,29.4,0.012,25.076,0c-4.313,0.012-7.814,3.512-7.821,7.819 C17.262,12.15,20.763,15.648,25.076,15.639L25.076,15.639z"/> <path d="M4.593,43.388h6.861l4.137-15.135h1.716L13.22,43.388h24.318l-4.389-15.135h1.817l2.32,7.415 c1.08,3.131,3.852,3.851,6.003,1.162l8.375-10.142c2.651-3.42-2.104-7.021-4.844-4.035l-4.993,5.952 c0.007,0.095-0.96-3.278-0.96-3.278c-1.135-3.978-4.918-7.903-10.595-7.922H19.576c-5.071,0.019-9.043,4.434-9.888,7.214 L4.593,43.388L4.593,43.388z"/> <polygon points="56.206,22.753 56.206,7.163 49.192,7.163 49.192,22.753 56.206,22.753 "/> <path d="M79.87,15.738c4.332-0.014,7.831-3.516,7.82-7.82c0.011-4.332-3.488-7.833-7.82-7.82c-4.306-0.013-7.806,3.488-7.821,7.82 C72.064,12.222,75.564,15.725,79.87,15.738L79.87,15.738z"/> <path d="M89.759,89.556v-43.19h5.751V22.804c0.007-3.079-2.757-5.448-6.71-5.449H70.436c-3.65,0.001-4.539,1.186-5.551,2.168 L49.597,37.889c-3.098,3.848,2.428,8.333,5.55,4.743L69.88,25.226v64.43c-0.019,6.475,9.06,6.686,9.081,0.201v-36.58h1.765v36.379 C80.748,96.109,89.772,96.13,89.759,89.556L89.759,89.556z"/> <polygon points="100,54.035 100,45.155 0,45.155 0,54.035 100,54.035 "/> </svg> Here’s the XAML that XamlTune created. It can be used in any WPF app without any changes: <Canvas Name="Layer_1" Width="100" Height="94.616" ClipToBounds="True" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"> <Path Fill="#FF000000"> <Path.Data> <PathGeometry FillRule="Nonzero" Figures="M25.076,15.639C29.4,15.648 32.9,12.151 32.896,7.819 32.9,3.512 29.4,0.012 25.076,0 20.763,0.012 17.262,3.512 17.255,7.819 17.262,12.15 20.763,15.648 25.076,15.639L25.076,15.639z" /> </Path.Data> </Path> <Path Fill="#FF000000"> <Path.Data> <PathGeometry FillRule="Nonzero" Figures="M4.593,43.388L11.454,43.388 15.591,28.253 17.307,28.253 13.22,43.388 37.538,43.388 33.149,28.253 34.966,28.253 37.286,35.668C38.366,38.799,41.138,39.519,43.289,36.83L51.664,26.688C54.315,23.268,49.56,19.667,46.82,22.653L41.827,28.605C41.834,28.7 40.867,25.327 40.867,25.327 39.732,21.349 35.949,17.424 30.272,17.405L19.576,17.405C14.505,17.424,10.533,21.839,9.688,24.619L4.593,43.388 4.593,43.388z" /> </Path.Data> </Path> <Path Fill="#FF000000"> <Path.Data> <PathGeometry FillRule="Nonzero" Figures="M56.206,22.753L56.206,7.163 49.192,7.163 49.192,22.753 56.206,22.753z" /> </Path.Data> </Path> <Path Fill="#FF000000"> <Path.Data> <PathGeometry FillRule="Nonzero" Figures="M79.87,15.738C84.202,15.724 87.701,12.222 87.69,7.918 87.701,3.586 84.202,0.0849999999999991 79.87,0.097999999999999 75.564,0.084999999999999 72.064,3.586 72.049,7.918 72.064,12.222 75.564,15.725 79.87,15.738L79.87,15.738z" /> </Path.Data> </Path> <Path Fill="#FF000000"> <Path.Data> <PathGeometry FillRule="Nonzero" Figures="M89.759,89.556L89.759,46.366 95.51,46.366 95.51,22.804C95.517,19.725,92.753,17.356,88.8,17.355L70.436,17.355C66.786,17.356,65.897,18.541,64.885,19.523L49.597,37.889C46.499,41.737,52.025,46.222,55.147,42.632L69.88,25.226 69.88,89.656C69.861,96.131,78.94,96.342,78.961,89.857L78.961,53.277 80.726,53.277 80.726,89.656C80.748,96.109,89.772,96.13,89.759,89.556L89.759,89.556z" /> </Path.Data> </Path> <Path Fill="#FF000000"> <Path.Data> <PathGeometry FillRule="Nonzero" Figures="M100,54.035L100,45.155 0,45.155 0,54.035 100,54.035z" /> </Path.Data> </Path> </Canvas> The XAML works AS-IS in a WPF application but there are some changes I did to get it to work in a WP7 app. Here’s the modified XAML in a WP7 application: <Canvas Grid.Row="0" Grid.Column="0" Name="Icon_1" Width="100" Height="94.616"> <Path Fill="#FF000000" Data="M25.076,15.639C29.4,15.648 32.9,12.151 32.896,7.819 32.9,3.512 29.4,0.012 25.076,0 20.763,0.012 17.262,3.512 17.255,7.819 17.262,12.15 20.763,15.648 25.076,15.639L25.076,15.639z"> </Path> <Path Fill="#FF000000" Data="M4.593,43.388L11.454,43.388 15.591,28.253 17.307,28.253 13.22,43.388 37.538,43.388 33.149,28.253 34.966,28.253 37.286,35.668C38.366,38.799,41.138,39.519,43.289,36.83L51.664,26.688C54.315,23.268,49.56,19.667,46.82,22.653L41.827,28.605C41.834,28.7 40.867,25.327 40.867,25.327 39.732,21.349 35.949,17.424 30.272,17.405L19.576,17.405C14.505,17.424,10.533,21.839,9.688,24.619L4.593,43.388 4.593,43.388z"> </Path> <Path Fill="#FF000000" Data="M56.206,22.753L56.206,7.163 49.192,7.163 49.192,22.753 56.206,22.753z"> </Path> <Path Fill="#FF000000" Data="M79.87,15.738C84.202,15.724 87.701,12.222 87.69,7.918 87.701,3.586 84.202,0.0849999999999991 79.87,0.097999999999999 75.564,0.084999999999999 72.064,3.586 72.049,7.918 72.064,12.222 75.564,15.725 79.87,15.738L79.87,15.738z"> </Path> <Path Fill="#FF000000" Data="M89.759,89.556L89.759,46.366 95.51,46.366 95.51,22.804C95.517,19.725,92.753,17.356,88.8,17.355L70.436,17.355C66.786,17.356,65.897,18.541,64.885,19.523L49.597,37.889C46.499,41.737,52.025,46.222,55.147,42.632L69.88,25.226 69.88,89.656C69.861,96.131,78.94,96.342,78.961,89.857L78.961,53.277 80.726,53.277 80.726,89.656C80.748,96.109,89.772,96.13,89.759,89.556L89.759,89.556z"> </Path> <Path Fill="#FF000000" Data="M100,54.035L100,45.155 0,45.155 0,54.035 100,54.035z"> </Path> </Canvas> All I did was take the data portion and put it directly into a Data attribute on the Path. Note that while it does show up in the app (on the emulator or device) it wouldn’t show up in Visual Studio for me. Maybe some XAML guru out there can tell me why. You can just as easily use the PNG files in WP7 but if you want the crispness of vector graphics, go for the XAML version. Of course with XamlTune being open source you could always modify the output of that program to cater it to your app. If you do make a change that’s worthy please consider submitting a patch to the project so everyone can benefit. Hope this helps and happy programming! Resources and Links Sample Project and Icons XamlTune an open source project to convert SVG to XAML The Noun Project source of the original files Jon Galloways post on SVG and XAML StackOverflow question on converting SVG to XAML

Read the article

Native packaging for JavaFX

- by igor

JavaFX 2.2 adds new packaging option for JavaFX applications, allowing you to package your application as a "native bundle". This gives your users a way to install and run your application without any external dependencies on a system JRE or FX SDK. I'd like to give you an overview of what is it, motivation behind it, and finally explain how to get started with it. Screenshots may give you some idea of user experience but first hand experience is always the best. Before we go into all of the boring details, here are few different flavors of Ensemble for you to try: exe, msi, dmg, rpm installers and zip of linux bundle for non-rpm aware systems. Alternatively, check out native packages for JFXtras 2. Whats wrong with existing deployment options? JavaFX 2 applications are easy to distribute as a standalone application or as an application deployed on the web (embedded in the web page or as link to launch application from the webpage). JavaFX packaging tools, such as ant tasks and javafxpackager utility, simplify the creation of deployment packages even further. Why add new deployment options? JavaFX applications have implicit dependency on the availability of Java and JavaFX runtimes, and while existing deployment methods provide a means to validate the system requirements are met -- and even guide user to perform required installation/upgrades -- they do not fully address all of the important scenarios. In particular, here are few examples: the user may not have admin permissions to install new system software if the application was certified to run in the specific environment (fixed version of Java and JavaFX) then it may be hard to ensure user has this environment due to an autoupdate of the system version of Java/JavaFX (to ensure they are secure). Potentially, other apps may have a requirement for a different JRE or FX version that your app is incompatible with. your distribution channel may disallow dependencies on external frameworks (e.g. Mac AppStore) What is a "native package" for JavaFX application? In short it is A Wrapper for your JavaFX application that makes is into a platform-specific application bundle Each Bundle is self-contained and includes your application code and resources (same set as need to launch standalone application from jar) Java and JavaFX runtimes (private copies to be used by this application only) native application launcher metadata (icons, etc.) No separate installation is needed for Java and JavaFX runtimes Can be distributed as .zip or packaged as platform-specific installer No application changes, the same jar app binaries can be deployed as a native bundle, double-clickable jar, applet, or web start app What is good about it: Easy deployment of your application on fresh systems, without admin permissions when using .zip or a user-level installer No-hassle compatibility. Your application is using a private copy of Java and JavaFX. The developer (you!) controls when these are updated. Easily package your application for Mac AppStore (or Windows, or...) Process name of running application is named after your application (and not just java.exe) Easily deploy your application using enterprise deployment tools (e.g. deploy as MSI) Support is built in into JDK 7u6 (that includes JavaFX 2.2) Is it a silver bullet for the deployment that other deployment options will be deprecated? No. There are no plans to deprecate other deployment options supported by JavaFX, each approach addresses different needs. Deciding whether native packaging is a best way to deploy your application depends on your requirements. A few caveats to consider: "Download and run" user experienceUnlike web deployment, the user experience is not about "launch app from web". It is more of "download, install and run" process, and the user may need to go through additional steps to get application launched - e.g. accepting a browser security dialog or finding and launching the application installer from "downloads" folder. Larger download sizeIn general size of bundled application will be noticeably higher than size of unbundled app as a private copy of the JRE and JavaFX are included. We're working to reduce the size through compression and customizable "trimming", but it will always be substantially larger than than an app that depends on a "system JRE". Bundle per target platformBundle formats are platform specific. Currently a native bundle can only be produced for the same system you are building on. That is, if you want to deliver native app bundles on Windows, Linux and Mac you will have to build your project on all three platforms. Application updates are the responsibility of developerWeb deployed Java applications automatically download application updates from the web as soon as they are available. The Java Autoupdate mechanism takes care of updating the Java and JavaFX runtimes to latest secure version several times every year. There is no built in support for this in for bundled applications. It is possible to use 3rd party libraries (like Sparkle on Mac) to add autoupdate support at application level. In a future version of JavaFX we may include built-in support for autoupdate (add yourself as watcher for RT-22211 if you are interested in this) Getting started with native bundles First, you need to get the latest JDK 7u6 beta build (build 14 or later is recommended). On Windows/Mac/Linux it comes with JavaFX 2.2 SDK as part of JDK installation and contains JavaFX packaging tools, including: bin/javafxpackagerCommand line utility to produce JavaFX packages. lib/ant-javafx.jar Set of ant tasks to produce JavaFX packages (most recommended way to deploy apps) For general information on how to use them refer to the Deploying JavaFX Application guide. Once you know how use these tools to package your JavaFX application for other deployment methods there are only a few minor tweaks necessary to produce native bundles: make sure java is used from JDK7u6 bundle you have installed adjust your PATH settings if needed if you are using ant tasks add "nativeBundles=all" attribute to fx:deploy task if you are using javafxpackager pass "-native" option to deploy command or if you are using makeall command then it will try build native packages by default result bundles will be in the "bundles" folder next to other deployment artifacts Note that building some types of native packages (e.g. .exe or .msi) may require additional free 3rd party software to be installed and available on PATH. As of JDK 7u6 build 14 you could build following types of packages: Windows bundle image EXE Inno Setup 5 or later is required Result exe will perform user level installation (no admin permissions are required) At least one shortcut will be created (menu or desktop) Application will be launched at the end of install MSI WiX 3.0 or later is required Result MSI will perform user level installation (no admin permissions are required) At least one shortcut will be created (menu or desktop) MacOS bundle image dmg (drag and drop) installer Linux bundle image rpm rpmbuild is required shortcut will be added to the programs menu If you are using Netbeans for producing the deployment packages then you will need to add custom build step to the build.xml to execute the fx:deploy task with native bundles enabled. Here is what we do for BrickBreaker sample: <target name="-post-jfx-deploy"> <fx:deploy width="${javafx.run.width}" height="${javafx.run.height}" nativeBundles="all" outdir="${basedir}/${dist.dir}" outfile="${application.title}"> <fx:application name="${application.title}" mainClass="${javafx.main.class}"> <fx:resources> <fx:fileset dir="${basedir}/${dist.dir}" includes="BrickBreaker.jar"/> </fx:resources> <info title="${application.title}" vendor="${application.vendor}"/> </fx:application> </fx:deploy> </target> This is pretty much regular use of fx:deploy task, the only special thing here is nativeBundles="all". Perhaps the easiest way to try building native bundles is to download the latest JavaFX samples bundle and build Ensemble, BrickBreaker or SwingInterop. Please give it a try and share your experience. We need your feedback! BTW, do not hesitate to file bugs and feature requests to JavaFX bug database! Wait! How can i ... This entry is not a comprehensive guide into native bundles, and we plan to post on this topic more. However, I am sure that once you play with native bundles you will have a lot of questions. We may not have all the answers, but please do not hesitate to ask! Knowing all of the questions is the first step to finding all of the answers.

Read the article

Install NPM Packages Automatically for Node.js on Windows Azure Web Site

- by Shaun

In one of my previous post I described and demonstrated how to use NPM packages in Node.js and Windows Azure Web Site (WAWS). In that post I used NPM command to install packages, and then use Git for Windows to commit my changes and sync them to WAWS git repository. Then WAWS will trigger a new deployment to host my Node.js application. Someone may notice that, a NPM package may contains many files and could be a little bit huge. For example, the “azure” package, which is the Windows Azure SDK for Node.js, is about 6MB. Another popular package “express”, which is a rich MVC framework for Node.js, is about 1MB. When I firstly push my codes to Windows Azure, all of them must be uploaded to the cloud. Is that possible to let Windows Azure download and install these packages for us? In this post, I will introduce how to make WAWS install all required packages for us when deploying. Let’s Start with Demo Demo is most straightforward. Let’s create a new WAWS and clone it to my local disk. Drag the folder into Git for Windows so that it can help us commit and push. Please refer to this post if you are not familiar with how to use Windows Azure Web Site, Git deployment, git clone and Git for Windows. And then open a command windows and install a package in our code folder. Let’s say I want to install “express”. And then created a new Node.js file named “server.js” and pasted the code as below. 1: var express = require("express"); 2: var app = express(); 3: 4: app.get("/", function(req, res) { 5: res.send("Hello Node.js and Express."); 6: }); 7: 8: console.log("Web application opened."); 9: app.listen(process.env.PORT); If we switch to Git for Windows right now we will find that it detected the changes we made, which includes the “server.js” and all files under “node_modules” folder. What we need to upload should only be our source code, but the huge package files also have to be uploaded as well. Now I will show you how to exclude them and let Windows Azure install the package on the cloud. First we need to add a special file named “.gitignore”. It seems cannot be done directly from the file explorer since this file only contains extension name. So we need to do it from command line. Navigate to the local repository folder and execute the command below to create an empty file named “.gitignore”. If the command windows asked for input just press Enter. 1: echo > .gitignore Now open this file and copy the content below and save. 1: node_modules Now if we switch to Git for Windows we will found that the packages under the “node_modules” were not in the change list. So now if we commit and push, the “express” packages will not be uploaded to Windows Azure. Second, let’s tell Windows Azure which packages it needs to install when deploying. Create another file named “package.json” and copy the content below into that file and save. 1: { 2: "name": "npmdemo", 3: "version": "1.0.0", 4: "dependencies": { 5: "express": "*" 6: } 7: } Now back to Git for Windows, commit our changes and push it to WAWS. Then let’s open the WAWS in developer portal, we will see that there’s a new deployment finished. Click the arrow right side of this deployment we can see how WAWS handle this deployment. Especially we can find WAWS executed NPM. And if we opened the log we can review what command WAWS executed to install the packages and the installation output messages. As you can see WAWS installed “express” for me from the cloud side, so that I don’t need to upload the whole bunch of the package to Azure. Open this website and we can see the result, which proved the “express” had been installed successfully. What’s Happened Under the Hood Now let’s explain a bit on what the “.gitignore” and “package.json” mean. The “.gitignore” is an ignore configuration file for git repository. All files and folders listed in the “.gitignore” will be skipped from git push. In the example below I copied “node_modules” into this file in my local repository. This means, do not track and upload all files under the “node_modules” folder. So by using “.gitignore” I skipped all packages from uploading to Windows Azure. “.gitignore” can contain files, folders. It can also contain the files and folders that we do NOT want to ignore. In the next section we will see how to use the un-ignore syntax to make the SQL package included. The “package.json” file is the package definition file for Node.js application. We can define the application name, version, description, author, etc. information in it in JSON format. And we can also put the dependent packages as well, to indicate which packages this Node.js application is needed. In WAWS, name and version is necessary. And when a deployment happened, WAWS will look into this file, find the dependent packages, execute the NPM command to install them one by one. So in the demo above I copied “express” into this file so that WAWS will install it for me automatically. I updated the dependencies section of the “package.json” file manually. But this can be done partially automatically. If we have a valid “package.json” in our local repository, then when we are going to install some packages we can specify “--save” parameter in “npm install” command, so that NPM will help us upgrade the dependencies part. For example, when I wanted to install “azure” package I should execute the command as below. Note that I added “--save” with the command. 1: npm install azure --save Once it finished my “package.json” will be updated automatically. Each dependent packages will be presented here. The JSON key is the package name while the value is the version range. Below is a brief list of the version range format. For more information about the “package.json” please refer here. Format Description Example version Must match the version exactly. "azure": "0.6.7" >=version Must be equal or great than the version. "azure": ">0.6.0" 1.2.x The version number must start with the supplied digits, but any digit may be used in place of the x. "azure": "0.6.x" ~version The version must be at least as high as the range, and it must be less than the next major revision above the range. "azure": "~0.6.7" * Matches any version. "azure": "*" And WAWS will install the proper version of the packages based on what you defined here. The process of WAWS git deployment and NPM installation would be like this. But Some Packages… As we know, when we specified the dependencies in “package.json” WAWS will download and install them on the cloud. For most of packages it works very well. But there are some special packages may not work. This means, if the package installation needs some special environment restraints it might be failed. For example, the SQL Server Driver for Node.js package needs “node-gyp”, Python and C++ 2010 installed on the target machine during the NPM installation. If we just put the “msnodesql” in “package.json” file and push it to WAWS, the deployment will be failed since there’s no “node-gyp”, Python and C++ 2010 in the WAWS virtual machine. For example, the “server.js” file. 1: var express = require("express"); 2: var app = express(); 3: 4: app.get("/", function(req, res) { 5: res.send("Hello Node.js and Express."); 6: }); 7: 8: var sql = require("msnodesql"); 9: var connectionString = "Driver={SQL Server Native Client 10.0};Server=tcp:tqy4c0isfr.database.windows.net,1433;Database=msteched2012;Uid=shaunxu@tqy4c0isfr;Pwd=P@ssw0rd123;Encrypt=yes;Connection Timeout=30;"; 10: app.get("/sql", function (req, res) { 11: sql.open(connectionString, function (err, conn) { 12: if (err) { 13: console.log(err); 14: res.send(500, "Cannot open connection."); 15: } 16: else { 17: conn.queryRaw("SELECT * FROM [Resource]", function (err, results) { 18: if (err) { 19: console.log(err); 20: res.send(500, "Cannot retrieve records."); 21: } 22: else { 23: res.json(results); 24: } 25: }); 26: } 27: }); 28: }); 29: 30: console.log("Web application opened."); 31: app.listen(process.env.PORT); The “package.json” file. 1: { 2: "name": "npmdemo", 3: "version": "1.0.0", 4: "dependencies": { 5: "express": "*", 6: "msnodesql": "*" 7: } 8: } And it failed to deploy to WAWS. From the NPM log we can see it’s because “msnodesql” cannot be installed on WAWS. The solution is, in “.gitignore” file we should ignore all packages except the “msnodesql”, and upload the package by ourselves. This can be done by use the content as below. We firstly un-ignored the “node_modules” folder. And then we ignored all sub folders but need git to check each sub folders. And then we un-ignore one of the sub folders named “msnodesql” which is the SQL Server Node.js Driver. 1: !node_modules/ 2: 3: node_modules/* 4: !node_modules/msnodesql For more information about the syntax of “.gitignore” please refer to this thread. Now if we go to Git for Windows we will find the “msnodesql” was included in the uncommitted set while “express” was not. I also need remove the dependency of “msnodesql” from “package.json”. Commit and push to WAWS. Now we can see the deployment successfully done. And then we can use the Windows Azure SQL Database from our Node.js application through the “msnodesql” package we uploaded. Summary In this post I demonstrated how to leverage the deployment process of Windows Azure Web Site to install NPM packages during the publish action. With the “.gitignore” and “package.json” file we can ignore the dependent packages from our Node.js and let Windows Azure Web Site download and install them while deployed. For some special packages that cannot be installed by Windows Azure Web Site, such as “msnodesql”, we can put them into the publish payload as well. With the combination of Windows Azure Web Site, Node.js and NPM it makes even more easy and quick for us to develop and deploy our Node.js application to the cloud. Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

Read the article

Using LINQ to Twitter OAuth with Windows 8

- by Joe Mayo

In previous posts, I explained how to use LINQ to Twitter with Windows 8, but the example was a Twitter Search, which didn’t require authentication. Much of the Twitter API requires authentication, so this post will explain how you can perform OAuth authentication with LINQ to Twitter in a Windows 8 Metro-style application. Getting Started I have earlier posts on how to create a Windows 8 app and add pages, so I’ll assume it isn’t necessary to repeat here. One difference is that I’m using Visual Studio 2012 RC and some of the terminology and/or library code might be slightly different. Here are steps to get started: Create a new Windows metro style app, selecting the Blank App project template. Create a new Basic Page and name it OAuth.xaml. Note: You’ll receive a prompt window for adding files and you should click Yes because those files are necessary for this demo. Add a new Basic Page named TweetPage.xaml. Open App.xaml.cs and change !rootFrame.Navigate(typeof(MainPage)) to !rootFrame.Navigate(typeof(TweetPage)). Now that the project is set up you’ll see the reason why authentication is required by setting up the TweetPage. Setting Up to Tweet a Status In this section, I’ll show you how to set up the XAML and code-behind for a tweet. The tweet logic will check to see if the user is authenticated before performing the tweet. To tweet, I put a TextBox and Button on the XAML page. The following code omits most of the page, concentrating primarily on the elements of interest in this post: <StackPanel Grid.Row="1"> <TextBox Name="TweetTextBox" Margin="15" /> <Button Name="TweetButton" Content="Tweet" Click="TweetButton_Click" Margin="15,0" /> </StackPanel> Given the UI above, the user types the message they want to tweet, and taps Tweet. This invokes TweetButton_Click, which checks to see if the user is authenticated. If the user is not authenticated, the app navigates to the OAuth page. If they are authenticated, LINQ to Twitter does an UpdateStatus to post the user’s tweet. Here’s the TweetButton_Click implementation: void TweetButton_Click(object sender, RoutedEventArgs e) { PinAuthorizer auth = null; if (SuspensionManager.SessionState.ContainsKey("Authorizer")) { auth = SuspensionManager.SessionState["Authorizer"] as PinAuthorizer; } if (auth == null || !auth.IsAuthorized) { Frame.Navigate(typeof(OAuthPage)); return; } var twitterCtx = new TwitterContext(auth); Status tweet = twitterCtx.UpdateStatus(TweetTextBox.Text); new MessageDialog(tweet.Text, "Successful Tweet").ShowAsync(); } For authentication, this app uses PinAuthorizer, one of several authorizers available in the LINQ to Twitter library. I’ll explain how PinAuthorizer works in the next section. What’s important here is that LINQ to Twitter needs an authorizer to post a Tweet. The code above checks to see if a valid authorizer is available. To do this, it uses the SuspensionManager class, which is part of the code generated earlier when creating OAuthPage.xaml. The SessionState property is a Dictionary<string, object> and I’m using the Authorizer key to store the PinAuthorizer. If the user previously authorized during this session, the code reads the PinAuthorizer instance from SessionState and assigns it to the auth variable. If the user is authorized, auth would not be null and IsAuthorized would be true. Otherwise, the app navigates the user to OAuthPage.xaml, which I’ll discuss in more depth in the next section. When the user is authorized, the code passes the authorizer, auth, to the TwitterContext constructor. LINQ to Twitter uses the auth instance to build OAuth signatures for each interaction with Twitter. You no longer need to write any more code to make this happen. The code above accepts the tweet just posted in the Status instance, tweet, and displays a message with the text to confirm success to the user. You can pull the PinAuthorizer instance from SessionState, instantiate your TwitterContext, and use it as you need. Just remember to make sure you have a valid authorizer, like the code above. As shown earlier, the code navigates to OAuthPage.xaml when a valid authorizer isn’t available. The next section shows how to perform the authorization upon arrival at OAuthPage.xaml. Doing the OAuth Dance This section shows how to authenticate with LINQ to Twitter’s built-in OAuth support. From the user perspective, they must be navigated to the Twitter authentication page, add credentials, be navigated to a Pin number page, and then enter that Pin in the Windows 8 application. The following XAML shows the relevant elements that the user will interact with during this process. <StackPanel Grid.Row="2"> <WebView x:Name="OAuthWebBrowser" HorizontalAlignment="Left" Height="400" Margin="15" VerticalAlignment="Top" Width="700" /> <TextBlock Text="Please perform OAuth process (above), enter Pin (below) when ready, and tap Authenticate:" Margin="15,15,15,5" /> <TextBox Name="PinTextBox" Margin="15,0,15,15" Width="432" HorizontalAlignment="Left" IsEnabled="False" /> <Button Name="AuthenticatePinButton" Content="Authenticate" Margin="15" IsEnabled="False" Click="AuthenticatePinButton_Click" /> </StackPanel> The WebView in the code above is what allows the user to see the Twitter authentication page. The TextBox is for entering the Pin, and the Button invokes code that will take the Pin and allow LINQ to Twitter to complete the authentication process. As you can see, there are several steps to OAuth authentication, but LINQ to Twitter tries to minimize the amount of code you have to write. The two important parts of the code to make this happen are the part that starts the authentication process and the part that completes the authentication process. The following code, from OAuthPage.xaml.cs, shows a couple events that are instrumental in making this process happen: public OAuthPage() { this.InitializeComponent(); this.Loaded += OAuthPage_Loaded; OAuthWebBrowser.LoadCompleted += OAuthWebBrowser_LoadCompleted; } The OAuthWebBrowser_LoadCompleted event handler enables UI controls when the browser is done loading – notice that the TextBox and Button in the previous XAML have their IsEnabled attributes set to False. When the Page.Loaded event is invoked, the OAuthPage_Loaded handler starts the OAuth process, shown here: void OAuthPage_Loaded(object sender, RoutedEventArgs e) { auth = new PinAuthorizer { Credentials = new InMemoryCredentials { ConsumerKey = "", ConsumerSecret = "" }, UseCompression = true, GoToTwitterAuthorization = pageLink => Dispatcher.RunAsync(CoreDispatcherPriority.Normal, () => OAuthWebBrowser.Navigate(new Uri(pageLink, UriKind.Absolute))) }; auth.BeginAuthorize(resp => Dispatcher.RunAsync(CoreDispatcherPriority.Normal, () => { switch (resp.Status) { case TwitterErrorStatus.Success: break; case TwitterErrorStatus.RequestProcessingException: case TwitterErrorStatus.TwitterApiError: new MessageDialog(resp.Error.ToString(), resp.Message).ShowAsync(); break; } })); } The PinAuthorizer, auth, a field of this class instantiated in the code above, assigns keys to the Credentials property. These are credentials that come from registering an application with Twitter, explained in the LINQ to Twitter documentation, Securing Your Applications. Notice how I use Dispatcher.RunAsync to marshal the web browser navigation back onto the UI thread. Internally, LINQ to Twitter invokes the lambda expression assigned to GoToTwitterAuthorization when starting the OAuth process. In this case, we want the WebView control to navigate to the Twitter authentication page, which is defined with a default URL in LINQ to Twitter and passed to the GoToTwitterAuthorization lambda as pageLink. Then you need to start the authorization process by calling BeginAuthorize. This starts the OAuth dance, running asynchronously. LINQ to Twitter invokes the callback assigned to the BeginAuthorize parameter, allowing you to take whatever action you need, based on the Status of the response, resp. As mentioned earlier, this is where the user performs the authentication process, enters the Pin, and clicks authenticate. The handler for authenticate completes the process and saves the authorizer for subsequent use by the application, as shown below: void AuthenticatePinButton_Click(object sender, RoutedEventArgs e) { auth.CompleteAuthorize( PinTextBox.Text, completeResp => Dispatcher.RunAsync(CoreDispatcherPriority.Normal, () => { switch (completeResp.Status) { case TwitterErrorStatus.Success: SuspensionManager.SessionState["Authorizer"] = auth; Frame.Navigate(typeof(TweetPage)); break; case TwitterErrorStatus.RequestProcessingException: case TwitterErrorStatus.TwitterApiError: new MessageDialog(completeResp.Error.ToString(), completeResp.Message).ShowAsync(); break; } })); } The PinAuthorizer CompleteAuthorize method takes two parameters: Pin and callback. The Pin is from what the user entered in the TextBox prior to clicking the Authenticate button that invoked this method. The callback handles the response from completing the OAuth process. The completeResp holds information about the results of the operation, indicated by a Status property of type TwitterErrorStatus. On success, the code assigns auth to SessionState. You might remember SessionState from the previous description of TweetPage – this is where the valid authorizer comes from. After saving the authorizer, the code navigates the user back to TweetPage, where they can type in a message, click the Tweet button, and observe that they have successfully tweeted. Summary You’ve seen how to get started with using LINQ to Twitter in a Metro-style application. The generated code contained a SuspensionManager class with way to manage information across multiple pages via its SessionState property. You also saw how LINQ to Twitter performs authorization in two steps of starting the process and completing the process when the user provides a Pin number. Remember to marshal callback thread back onto the UI – you saw earlier how to use Dispatcher.RunAsync to accomplish this. There were a few steps in the process, but LINQ to Twitter did minimize the amount of code you needed to write to make it happen. You can download the MetroOAuthDemo.zip sample on the LINQ to Twitter Samples Page. @JoeMayo

Read the article

Capistrano asks for SSH password when deploying from local machine to server

- by GhostRider

When I try to ssh to a server, I'm able to do it as my id_rsa.pub key is added to the authorized keys in the server. Now when I try to deploy my code via Capistrano to the server from my local project folder, the server asks for a password. I'm unable to understand what could be the issue if I'm able to ssh and unable to deploy to the same server. $ cap deploy:setup "no seed data" triggering start callbacks for `deploy:setup' * 13:42:18 == Currently executing `multistage:ensure' *** Defaulting to `development' * 13:42:18 == Currently executing `development' * 13:42:18 == Currently executing `deploy:setup' triggering before callbacks for `deploy:setup' * 13:42:18 == Currently executing `db:configure_mongoid' * executing "mkdir -p /home/deploy/apps/development/flyingbird/shared/config" servers: ["dev1.noob.com", "176.9.24.217"] Password: Cap script: # gem install capistrano capistrano-ext capistrano_colors begin; require 'capistrano_colors'; rescue LoadError; end require "bundler/capistrano" # RVM bootstrap # $:.unshift(File.expand_path('./lib', ENV['rvm_path'])) require 'rvm/capistrano' set :rvm_ruby_string, 'ruby-1.9.2-p290' set :rvm_type, :user # or :user # Application setup default_run_options[:pty] = true # allow pseudo-terminals ssh_options[:forward_agent] = true # forward SSH keys (this will use your SSH key to get the code from git repository) ssh_options[:port] = 22 set :ip, "dev1.noob.com" set :application, "flyingbird" set :repository, "repo-path" set :scm, :git set :branch, fetch(:branch, "master") set :deploy_via, :remote_cache set :rails_env, "production" set :use_sudo, false set :scm_username, "user" set :user, "user1" set(:database_username) { application } set(:production_database) { application + "_production" } set(:staging_database) { application + "_staging" } set(:development_database) { application + "_development" } role :web, ip # Your HTTP server, Apache/etc role :app, ip # This may be the same as your `Web` server role :db, ip, :primary => true # This is where Rails migrations will run # Use multi-staging require "capistrano/ext/multistage" set :stages, ["development", "staging", "production"] set :default_stage, rails_env before "deploy:setup", "db:configure_mongoid" # Uncomment if you use any of these databases after "deploy:update_code", "db:symlink_mongoid" after "deploy:update_code", "uploads:configure_shared" after "uploads:configure_shared", "uploads:symlink" after 'deploy:update_code', 'bundler:symlink_bundled_gems' after 'deploy:update_code', 'bundler:install' after "deploy:update_code", "rvm:trust_rvmrc" # Use this to update crontab if you use 'whenever' gem # after "deploy:symlink", "deploy:update_crontab" if ARGV.include?("seed_data") after "deploy", "db:seed" else p "no seed data" end #Custom tasks to handle resque and redis restart before "deploy", "deploy:stop_workers" after "deploy", "deploy:restart_redis" after "deploy", "deploy:start_workers" after "deploy", "deploy:cleanup" 'Create symlink for public uploads' namespace :uploads do task :symlink do run <<-CMD rm -rf #{release_path}/public/uploads && mkdir -p #{release_path}/public && ln -nfs #{shared_path}/public/uploads #{release_path}/public/uploads CMD end task :configure_shared do run "mkdir -p #{shared_path}/public" run "mkdir -p #{shared_path}/public/uploads" end end namespace :rvm do desc 'Trust rvmrc file' task :trust_rvmrc do run "rvm rvmrc trust #{current_release}" end end namespace :db do desc "Create mongoid.yml in shared path" task :configure_mongoid do db_config = <<-EOF defaults: &defaults host: localhost production: <<: *defaults database: #{production_database} staging: <<: *defaults database: #{staging_database} EOF run "mkdir -p #{shared_path}/config" put db_config, "#{shared_path}/config/mongoid.yml" end desc "Make symlink for mongoid.yml" task :symlink_mongoid do run "ln -nfs #{shared_path}/config/mongoid.yml #{release_path}/config/mongoid.yml" end desc "Fill the database with seed data" task :seed do run "cd #{current_path}; RAILS_ENV=#{default_stage} bundle exec rake db:seed" end end namespace :bundler do desc "Symlink bundled gems on each release" task :symlink_bundled_gems, :roles => :app do run "mkdir -p #{shared_path}/bundled_gems" run "ln -nfs #{shared_path}/bundled_gems #{release_path}/vendor/bundle" end desc "Install bundled gems " task :install, :roles => :app do run "cd #{release_path} && bundle install --deployment" end end namespace :deploy do task :start, :roles => :app do run "touch #{current_path}/tmp/restart.txt" end desc "Restart the app" task :restart, :roles => :app do run "touch #{current_path}/tmp/restart.txt" end desc "Start the workers" task :stop_workers do run "cd #{current_path}; RAILS_ENV=#{default_stage} bundle exec rake resque:stop_workers" end desc "Restart Redis server" task :restart_redis do "/etc/init.d/redis-server restart" end desc "Start the workers" task :start_workers do run "cd #{current_path}; RAILS_ENV=#{default_stage} bundle exec rake resque:start_workers" end end

Read the article

MySQL 5.5 (Percona) assertion failure log.. what would cause this?

- by Tom Geee

256GB, 64 Core , AMD running Ubuntu 12.04 with Percona MySQL 5.5.28. Below is the assertion failure. We just had a second assertion failure (different "in file", position, etc) while running a large set of inserts. After the first failure, MySQL restarted after a reboot only - after continuously looping on the same error after trying to recover. I decided to do a mysqlcheck with -o for optimize. Since these are all Innodb tables (very large tables, 60+GB) this would do an alter table on all tables. In the middle of this , the below assertion failure happened again: 121115 22:30:31 InnoDB: Assertion failure in thread 140086589445888 in file btr0pcur.c line 452 InnoDB: Failing assertion: btr_page_get_prev(next_page, mtr) == buf_block_get_page_no(btr_pcur_get_block(cursor)) InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.5/en/forcing-innodb-recovery.html InnoDB: about forcing recovery. 03:30:31 UTC - mysqld got signal 6 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. Please help us make Percona Server better by reporting any bugs at http://bugs.percona.com/ key_buffer_size=536870912 read_buffer_size=131072 max_used_connections=404 max_threads=500 thread_count=90 connection_count=90 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1618416 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. Thread pointer: 0x14edeb710 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 7f687366ce80 thread_stack 0x30000 /usr/sbin/mysqld(my_print_stacktrace+0x2e)[0x7b52ee] /usr/sbin/mysqld(handle_fatal_signal+0x484)[0x68f024] /lib/x86_64-linux-gnu/libpthread.so.0(+0xfcb0)[0x7f9cbb23fcb0] /lib/x86_64-linux-gnu/libc.so.6(gsignal+0x35)[0x7f9cbaea6425] /lib/x86_64-linux-gnu/libc.so.6(abort+0x17b)[0x7f9cbaea9b8b] /usr/sbin/mysqld[0x858463] /usr/sbin/mysqld[0x804513] /usr/sbin/mysqld[0x808432] /usr/sbin/mysqld[0x7db8bf] /usr/sbin/mysqld(_Z13rr_sequentialP11READ_RECORD+0x1d)[0x755aed] /usr/sbin/mysqld(_Z17mysql_alter_tableP3THDPcS1_P24st_ha_create_informationP10TABLE_LISTP10Alter_infojP8st_orderb+0x216b)[0x60399b] /usr/sbin/mysqld(_Z20mysql_recreate_tableP3THDP10TABLE_LIST+0x166)[0x604bd6] /usr/sbin/mysqld[0x647da1] /usr/sbin/mysqld(_ZN24Optimize_table_statement7executeEP3THD+0xde)[0x64891e] /usr/sbin/mysqld(_Z21mysql_execute_commandP3THD+0x1168)[0x59b558] /usr/sbin/mysqld(_Z11mysql_parseP3THDPcjP12Parser_state+0x30c)[0x5a132c] /usr/sbin/mysqld(_Z16dispatch_command19enum_server_commandP3THDPcj+0x1620)[0x5a2a00] /usr/sbin/mysqld(_Z24do_handle_one_connectionP3THD+0x14f)[0x63ce6f] /usr/sbin/mysqld(handle_one_connection+0x51)[0x63cf31] /lib/x86_64-linux-gnu/libpthread.so.0(+0x7e9a)[0x7f9cbb237e9a] /lib/x86_64-linux-gnu/libc.so.6(clone+0x6d)[0x7f9cbaf63cbd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort. Query (7f6300004b60): is an invalid pointer Connection ID (thread ID): 876 Status: NOT_KILLED You may download the Percona Server operations manual by visiting http://www.percona.com/software/percona-server/. You may find information in the manual which will help you identify the cause of the crash. 121115 22:31:07 [Note] Plugin 'FEDERATED' is disabled. 121115 22:31:07 InnoDB: The InnoDB memory heap is disabled 121115 22:31:07 InnoDB: Mutexes and rw_locks use GCC atomic builtins .. Then it recovered , without a reboot this time. from the log, what would cause this? I am currently running a dump to see if the problem resurfaces. edit: data partition is all in / since this is a hosted, defaulted file system unfortunately: Filesystem Size Used Avail Use% Mounted on /dev/vda3 742G 445G 260G 64% / udev 121G 4.0K 121G 1% /dev tmpfs 49G 248K 49G 1% /run none 5.0M 0 5.0M 0% /run/lock none 121G 0 121G 0% /run/shm /dev/vda1 99M 54M 40M 58% /boot my.cnf: [client] port = 3306 socket = /var/run/mysqld/mysqld.sock [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] skip-name-resolve innodb_file_per_table default_storage_engine=InnoDB user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /data/mysql tmpdir = /tmp skip-external-locking key_buffer = 512M max_allowed_packet = 128M thread_stack = 192K thread_cache_size = 64 myisam-recover = BACKUP max_connections = 500 table_cache = 812 table_definition_cache = 812 #query_cache_limit = 4M #query_cache_size = 512M join_buffer_size = 512K innodb_additional_mem_pool_size = 20M innodb_buffer_pool_size = 196G #innodb_file_io_threads = 4 #innodb_thread_concurrency = 12 innodb_flush_log_at_trx_commit = 1 innodb_log_buffer_size = 8M innodb_log_file_size = 1024M innodb_log_files_in_group = 2 innodb_max_dirty_pages_pct = 90 innodb_lock_wait_timeout = 120 log_error = /var/log/mysql/error.log long_query_time = 5 slow_query_log = 1 slow_query_log_file = /var/log/mysql/slowlog.log [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] [isamchk] key_buffer = 16M

Read the article

Why wireless adatper stop to work?

- by AndreaNobili

today I correctly installed the driver for the TP-LINK TL-WN725N USB wireless adapter on my RaspBerry Pi (I use RaspBian that is a Debian), then I setted up the wifi using the wpa-supplicant as explained in this tutorial: http://www.maketecheasier.com/setup-wifi-on-raspberry-pi/ This worked fine untill this evening. Then suddenly it stopped to work when I try to connect in SSH and the Raspberry is on the wireless (or rather it should be, as this is not in the list of my router's DHCP connected Client) The strange thing is that the USB wirless adapter blink so I think that this is not a driver problem. If I try to connect it by the ethernet I have no problem. It appear in my router's DHCP connected Client and I can connect to it by SSH. When I connect to it using ethernet if I perform an ifconfig command I obtain: pi@raspberrypi ~ $ ifconfig eth0 Link encap:Ethernet HWaddr b8:27:eb:2a:9f:b0 inet addr:192.168.1.9 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:48 errors:0 dropped:0 overruns:0 frame:0 TX packets:59 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:6006 (5.8 KiB) TX bytes:8268 (8.0 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1104 (1.0 KiB) TX bytes:1104 (1.0 KiB) wlan0 Link encap:Ethernet HWaddr e8:94:f6:19:80:4c UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) So it seems that the wlan0 USB wireless adapter driver is correctly loaded. If I remove the USB wireless adapter and put it again into the USB port, the lasts lines of dmesg log is: [ 20.303172] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 20.306340] RTL871X: set bssid:00:00:00:00:00:00 [ 20.306726] RTL871X: set ssid [g\xffffffc6isQ\xffffffffJ\xffffffec)\xffffffcd\xffffffba\xffffffba\xffffffab\xfffffff2\xfffffffb\xffffffe3F|\xffffffc2T\xfffffff8\x1b\xffffffe8\xffffffe7\xffffff8dvZ.c3\xffffff9f\xffffffc9\xffffff9a\xffffff9aD\xffffffa7\x1a\xffffffa0\x1a\xffffff8b] fw_state=0x00000008 [ 21.614585] RTL871X: indicate disassoc [ 21.908495] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 25.006282] Adding 102396k swap on /var/swap. Priority:-1 extents:1 across:102396k SSFS [ 26.247997] RTL871X: nolinked power save enter As you can see some of these line are related to the RTL871X that is my USB wireless adapter, but I don't know is that these line report an error or if it is all ok. Looking at the adapter status I obtain: pi@raspberrypi ~ $ ip link list dev wlan0 3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DORMANT qlen 1000 link/ether e8:94:f6:19:80:4c brd ff:ff:ff:ff:ff:ff As you can see the mode is DORMANT but I think that this is normal because now I am connected using ethernet. I tryied to set up the adapter but it seems that I obtain no result, infact: pi@raspberrypi ~ $ sudo ip link set dev wlan0 up pi@raspberrypi ~ $ ip link list dev wlan0 3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DORMANT qlen 1000 link/ether e8:94:f6:19:80:4c brd ff:ff:ff:ff:ff:ff pi@raspberrypi ~ $ sudo ip link set dev wlan0 up This is my /etc/network/interfaces file content and it is ok: auto lo iface lo inet loopback iface eth0 inet dhcp allow-hotplug wlan0 iface wlan0 inet manual wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf iface default inet dhcp and it is the /etc/wpa_supplicant/wpa_supplicant.conf that I think is ok (I did not change it compared to when it worked): ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev update_config=1 network={ ssid="MY-NETWORK" psk="mypassword" key_mgmt=WPA-PSK } and infact if I execute a network scan I correctly find MY-NETWORK in the network list,infact: pi@raspberrypi ~ $ sudo iwlist wlan0 scan | grep ESSID ESSID:"TeleTu_74888B0060AD" ESSID:"MY-NETWORK" ESSID:"FASTWEB-1-PT6NtjL4TOSe" ESSID:"DC" So I reboot the system and I remove the ethernet cable but when I try to connect again to my raspberry I obatin the following error message: andrea@andrea-virtual-machine:~$ sudo ssh [email protected] ssh: connect to host 192.168.1.9 port 22: No route to host It seems that it can't connect using wireless. What could be the problem? What am I missing? How can I solve this situation? Tnx

Read the article

Unable to connect to OpenVPN server

- by Incognito

I'm trying to get a working setup of OpenVPN on my VM and authenticate into it from a client. I'm not sure but it looks to me like it's socket related, as it's not set to LISTEN, and localhost seems wrong. I've never set up VPN before. # netstat -tulpn | grep vpn Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name udp 0 0 127.0.0.1:1194 0.0.0.0:* 24059/openvpn I don't think this is set up correctly. Here's some detail into what I've done. I have a VPS from MediaTemple: These are my interfaces before starting openvpn: lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:39482 errors:0 dropped:0 overruns:0 frame:0 TX packets:39482 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:3237452 (3.2 MB) TX bytes:3237452 (3.2 MB) venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:127.0.0.1 P-t-P:127.0.0.1 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 RX packets:4885284 errors:0 dropped:0 overruns:0 frame:0 TX packets:4679884 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:835278537 (835.2 MB) TX bytes:1989289617 (1.9 GB) venet0:0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:205.[redacted] P-t-P:205.186.148.82 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 I've followed this guide on setting up a basic server and getting a .p12 file, however, I was receiving an error that stated /dev/net/tun was missing, so I created it mkdir -p /dev/net mknod /dev/net/tun c 10 200 chmod 600 /dev/net/tun This resolved the error preventing the service from launching, however, I am unable to connect. On the server I've set up the myserver.conf file (as per the tutorial) to indicate local 127.0.0.1 (I've also attempted with the public IP address, perhaps I don't understand what they mean by local IP?). The server launches without error, this is what the log looks like when it starts: Sun Apr 1 17:21:27 2012 OpenVPN 2.1.3 x86_64-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [MH] [PF_INET6] [eurephia] built on Mar 11 2011 Sun Apr 1 17:21:27 2012 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Sun Apr 1 17:21:27 2012 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Sun Apr 1 17:21:27 2012 /usr/bin/openssl-vulnkey -q -b 1024 -m <modulus omitted> Sun Apr 1 17:21:27 2012 TUN/TAP device tun0 opened Sun Apr 1 17:21:27 2012 /sbin/ifconfig tun0 10.8.0.1 pointopoint 10.8.0.2 mtu 1500 Sun Apr 1 17:21:27 2012 GID set to openvpn Sun Apr 1 17:21:27 2012 UID set to openvpn Sun Apr 1 17:21:27 2012 UDPv4 link local (bound): [AF_INET]127.0.0.1:1194 Sun Apr 1 17:21:27 2012 UDPv4 link remote: [undef] Sun Apr 1 17:21:27 2012 Initialization Sequence Completed This creates a tun0 interface that looks like this: tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) And the netstat command still indicates the state is not set to LISTEN. On the client-side I've installed the p12 certs onto two devices (one is an android tablet, the other is an Ubuntu desktop). I don't see port 1194 as open either. Both clients install the cert files and then ask me for the L2TP secret (which was set on the file), but then they oddly ask me for a username and a password, which I don't know where I could possibly get those from. I attempted all of my logins, and some whacky guesses that were frantically pulling at straws. If there's any more information I could provide let me know.

Read the article

Nginx + PHP - No input file specified for 1 server block. Other server block works fine

- by F21

I am running Ubuntu Desktop 12.04 with nginx 1.2.6. PHP is PHP-FPM 5.4.9. This is the relevant part of my nginx.conf: http { include mime.types; default_type application/octet-stream; sendfile on; keepalive_timeout 65; server { server_name testapp.com; root /www/app/www/; index index.php index.html index.htm; location ~ \.php$ { fastcgi_intercept_errors on; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } } server { listen 80 default_server; root /www index index.html index.php; location ~ \.php$ { fastcgi_intercept_errors on; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } } } Relevant bits from php-fpm.conf: ; Chroot to this directory at the start. This value must be defined as an ; absolute path. When this value is not set, chroot is not used. ; Note: you can prefix with '$prefix' to chroot to the pool prefix or one ; of its subdirectories. If the pool prefix is not set, the global prefix ; will be used instead. ; Note: chrooting is a great security feature and should be used whenever ; possible. However, all PHP paths will be relative to the chroot ; (error_log, sessions.save_path, ...). ; Default Value: not set ;chroot = ; Chdir to this directory at the start. ; Note: relative path can be used. ; Default Value: current directory or / when chroot chdir = /www In my hosts file, I redirect 2 domains: testapp.com and test.com to 127.0.0.1. My web files are all stored in /www. From the above settings, if I visit test.com/phpinfo.php and test.com/app/www, everything works as expected and I get output from PHP. However, if I visit testapp.com, I get the dreaded No input file specified. error. So, at this point, I pull out the log files and have a look: 2012/12/19 16:00:53 [error] 12183#0: *17 FastCGI sent in stderr: "Unable to open primary script: /www/app/www/index.php (No such file or directory)" while reading response header from upstream, client: 127.0.0.1, server: testapp.com, request: "GET / HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "testapp.com" This baffles me because I have checked again and again and /www/app/www/index.php definitely exists! This is also validated by the fact that test.com/app/www/index.php works which means the file exists and the permissions are correct. Why is this happening and what are the root causes of things breaking for just the testapp.com v-host? Just an update to my investigation: I have commented out chroot and chdir in php-fpm.conf to narrow down the problem If I remove the location ~ \.php$ block for testapp.com, then nginx will send me a bin file which contains the PHP code. This means that on nginx's side, things are fine. The problem is that something must be mangling the file paths when passing it to PHP-FPM. Having said that, it is quite strange that the default_server v-host works fine because its root is /www, where as things just won't work for the testapp.com v-host because the root is /www/app/www.

Read the article

Cannot create zpool, how to get rid of intel raid volume?

- by nagylzs

This is a FreeBSD 9.1 amd64 computer. It has 5 disks installed. The ada0 and ada1 disks are used with a hw raid to provide the root filesystem: root@gw:/home/gandalf # ls /dev | grep ada ada0 ada1 ada2 ada3 ada4 root@gw:/home/gandalf # zpool status pool: zroot state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM zroot ONLINE 0 0 0 raid/r0s1a ONLINE 0 0 0 errors: No known data errors I want to create a raidz pool for the remaining disks: root@gw:/home/gandalf # zpool create -f data raidz1 ada2 ada3 ada4 cannot create 'data': one or more devices is currently unavailable root@gw:/home/gandalf # dmesg | grep ada2 ada2 at ata4 bus 0 scbus6 target 0 lun 0 ada2: <WDC WD20EARS-00MVWB0 51.0AB51> ATA-8 SATA 2.x device ada2: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada2: Previously was known as ad16 root@gw:/home/gandalf # dmesg | grep ada3 ada3 at ata5 bus 0 scbus7 target 0 lun 0 ada3: <SAMSUNG HD103UJ 1AA01118> ATA-7 SATA 2.x device ada3: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada3: 953868MB (1953523055 512 byte sectors: 16H 63S/T 16383C) ada3: Previously was known as ad18 GEOM_RAID: Intel-fb8732fa: Disk ada3 state changed from NONE to ACTIVE. GEOM_RAID: Intel-fb8732fa: Subdisk Volume0:0-ada3 state changed from NONE to ACTIVE. root@gw:/home/gandalf # dmesg | grep ada4 ada4 at ata6 bus 0 scbus8 target 0 lun 0 ada4: <TOSHIBA DT01ACA100 MS2OA750> ATA-8 SATA 3.x device ada4: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada4: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada4: Previously was known as ad20 root@gw:/home/gandalf # dmesg | grep GEOM_RAID Aha, so ada3 is already part of another raid volume? Let's see: root@gw:/home/gandalf # dmesg | grep GEOM_RAID GEOM_RAID: SiI-130628113902: Array SiI-130628113902 created. GEOM_RAID: SiI-130628113902: Disk ada0 state changed from NONE to ACTIVE. GEOM_RAID: SiI-130628113902: Subdisk SiI Raid1 Set:1-ada0 state changed from NONE to STALE. GEOM_RAID: SiI-130628113902: Disk ada1 state changed from NONE to ACTIVE. GEOM_RAID: SiI-130628113902: Subdisk SiI Raid1 Set:0-ada1 state changed from NONE to STALE. GEOM_RAID: SiI-130628113902: Array started. GEOM_RAID: SiI-130628113902: Subdisk SiI Raid1 Set:0-ada1 state changed from STALE to ACTIVE. GEOM_RAID: SiI-130628113902: Subdisk SiI Raid1 Set:1-ada0 state changed from STALE to RESYNC. GEOM_RAID: SiI-130628113902: Subdisk SiI Raid1 Set:1-ada0 rebuild start at 0. GEOM_RAID: SiI-130628113902: Volume SiI Raid1 Set state changed from STARTING to SUBOPTIMAL. GEOM_RAID: SiI-130628113902: Provider raid/r0 for volume SiI Raid1 Set created. GEOM_RAID: Intel-fb8732fa: Array Intel-fb8732fa created. GEOM_RAID: Intel-fb8732fa: Force array start due to timeout. GEOM_RAID: Intel-fb8732fa: Disk ada3 state changed from NONE to ACTIVE. GEOM_RAID: Intel-fb8732fa: Subdisk Volume0:0-ada3 state changed from NONE to ACTIVE. GEOM_RAID: Intel-fb8732fa: Array started. GEOM_RAID: Intel-fb8732fa: Volume Volume0 state changed from STARTING to DEGRADED. GEOM_RAID: Intel-fb8732fa: Provider raid/r1 for volume Volume0 created. root@gw:/home/gandalf # Yes, indeed. I want to get rid of raid/r1 completely. However, the controller was already set to "IDE" mode in the BIOS. So why it is creating a raid volume??? I have also tried overwritting the first 16k data of ada3 and reboot the computer, but it did not help. How can I delete /dev/raid/r1 ? root@gw:/home/gandalf # graid status Name Status Components raid/r0 SUBOPTIMAL ada0 (ACTIVE (RESYNC 4%)) ada1 (ACTIVE (ACTIVE)) raid/r1 DEGRADED ada3 (ACTIVE (ACTIVE)) root@gw:/home/gandalf # graid delete raid/r1 graid: Array 'raid/r1' not found. root@gw:/home/gandalf # graid delete /dev/raid/r1 graid: Array '/dev/raid/r1' not found. root@gw:/home/gandalf # Thanks

Read the article

DRBD not syncing between my nodes when IP is reset

- by ramdaz

I am trying to setup DRBD by following the article at http://www.howtoforge.com/setting-up-network-raid1-with-drbd-on-ubuntu-11.10-p2 I am using Ubuntu 10.04 DRBD - 8.3.11 In the first run I had everything working perfectly and when shifting the systems to a production environment I decided to restart the Meta Data creation part and start from scratch. The IPs had changed entirely in the production environment. Issuing drdbadm create-md r0 in both the servers runs successfully. But when I do "drbdadm -- --overwrite-data-of-peer primary all" on the primary it fails to start the re sync. My config file is as given below resource r0 { protocol C; syncer { rate 50M; } startup { wfc-timeout 15; degr-wfc-timeout 60; } net { cram-hmac-alg sha1; shared-secret "aklsadkjlhdbskjndsf8738734jkfkjfkjf"; } on primaryds { device /dev/drbd0; disk /dev/md2; address 172.16.7.1:7788; meta-disk internal; } on secondaryds { device /dev/drbd0; disk /dev/md2; address 172.16.7.3:7788; meta-disk internal; } } Status on primary root at primaryds:~# cat /proc/drbd version: 8.3.7 (api:88/proto:86-91) GIT-hash: ea9e28dbff98e331a62bcbcc63a6135808fe2917 build by root at primaryds, 2012-05-12 15:08:01 0: cs:WFBitMapS ro:Primary/Secondary ds:UpToDate/Inconsistent C r---- ns:0 nr:0 dw:0 dr:200 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b oos:5690352828 Status on secondary root at secondaryds:/etc/drbd.d# cat /proc/drbd version: 8.3.7 (api:88/proto:86-91) GIT-hash: ea9e28dbff98e331a62bcbcc63a6135808fe2917 build by root at secondaryds, 2012-05-12 15:25:25 0: cs:WFBitMapT ro:Secondary/Primary ds:Inconsistent/UpToDate C r---- ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b oos:5690352828 Log of Primary May 30 13:42:23 primaryds kernel: [ 1584.057076] block drbd0: role( Secondary -> Primary ) disk( Inconsistent -> UpToDate ) May 30 13:42:23 primaryds kernel: [ 1584.086264] block drbd0: Forced to consider local data as UpToDate! May 30 13:42:23 primaryds kernel: [ 1584.086303] block drbd0: Creating new current UUID May 30 13:42:26 primaryds kernel: [ 1586.405551] block drbd0: drbd_sync_handshake: May 30 13:42:26 primaryds kernel: [ 1586.405564] block drbd0: self E8A075F378173D4B:0000000000000004:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:26 primaryds kernel: [ 1586.405574] block drbd0: peer 0000000000000004:0000000000000000:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:26 primaryds kernel: [ 1586.405582] block drbd0: uuid_compare()=2 by rule 30 May 30 13:42:26 primaryds kernel: [ 1586.405587] block drbd0: Becoming sync source due to disk states. May 30 13:42:26 primaryds kernel: [ 1586.405592] block drbd0: Writing the whole bitmap, full sync required after drbd_sync_handshake. May 30 13:42:27 primaryds kernel: [ 1588.171638] block drbd0: 5427 GB (1422588207 bits) marked out-of-sync by on disk bit-map. May 30 13:42:27 primaryds kernel: [ 1588.172769] block drbd0: conn( Connected -> WFBitMapS ) Log in Secondary May 30 13:42:24 secondaryds kernel: [ 1563.304894] block drbd0: peer( Secondary - Primary ) pdsk( Inconsistent - UpToDate ) May 30 13:42:24 secondaryds kernel: [ 1563.339674] block drbd0: drbd_sync_handshake: May 30 13:42:24 secondaryds kernel: [ 1563.339685] block drbd0: self 0000000000000004:0000000000000000:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:24 secondaryds kernel: [ 1563.339695] block drbd0: peer E8A075F378173D4B:0000000000000004:0000000000000000:0000000000000000 bits:1422588207 flags:0 May 30 13:42:24 secondaryds kernel: [ 1563.339703] block drbd0: uuid_compare()=-2 by rule 20 May 30 13:42:24 secondaryds kernel: [ 1563.339709] block drbd0: Becoming sync target due to disk states. May 30 13:42:24 secondaryds kernel: [ 1563.339714] block drbd0: Writing the whole bitmap, full sync required after drbd_sync_handshake. May 30 13:42:26 secondaryds kernel: [ 1565.652342] block drbd0: 5427 GB (1422588207 bits) marked out-of-sync by on disk bit-map. May 30 13:42:26 secondaryds kernel: [ 1565.652965] block drbd0: conn( Connected - WFBitMapT ) The serves are not responding once it reaches this stage. Tried redoing it couple of time but noting happens. Why could the resync not be taking place? I would like some advice? Directions?

Read the article

Installation of Access Database Engine 32-bit Fails

- by Rayzor78

I am trying to install Access Database Engine 2007 32-bit. The splash screen comes up, you click "Next", then it fails with the error: Installation ended prematurely because of an error You click "OK" and another error window says: The installation of the package failed. The exact same situation happens when I try this with Access Database Engine 2010 32-bit. This production server is running Windows Server 2008 R2 SP1 64-bit. Before I tried installing Access Database Engine 32-bit, I first needed to install Microsoft Office 2010 Pro (Excel and Office Tools only). I tried the 32-bit version on the production server since that is how I set it up in our Dev environment. No luck. The 32-bit version would not install. I did NOT get the error "You have 64-bit components of Office installed". I simply received the exact same two errors listed above. So, I knew that 32-bit/64-bit did not really matter for the Office install for my project, so I installed 64-bit of Office Pro 2010 (Excel and Office Tools only) with no problems. I have a requirement that I need to have the 32-bit version of the Access Database Engine installed. 2007 or 2010, doesn't matter. I cannot use the 64-bit version of Access Database Engine 2010 because my SSIS package will not work with it. I require the 32-bit version. I've tried several steps to try to get it installed. I seriously think that the production server has some aversion to installing 32-bit applications. Here's what I've tried: Tried installing via command line with the "/passive" switch....no luck. Tried numerous iterations to copy the install file to the server (downloaded a fresh copy directly to the server, downloaded a fresh copy to my local machine then copied it over, copied it over zipped up) (http://social.msdn.microsoft.com/Forums/en-US/sqldataaccess/thread/efd3c1f0-07cd-45ca-a626-2dd0c7ac3e9f). Tried Method 1 from this link. Could not try Method 2 because it requires a server reboot and in my environment that requires a long change management process. I've verified that I am a local administrator on the server. (Evidence, I am able to install other applications (office 64-bit per above)). Verified that there are no other office products that should be blocking the installation. The fore-mentioned install of Excel 2010 64-bit was the first Office product installed on the server. VERY ODD: To test my theory that the production server does not like 32-bit applications, I installed something lightweight. I installed 7-Zip 32-bit on the production server with no problems whatsoever. Here are some things that I have not tried (i will follow-up once I do): Method 2 (as mentioned above). Requires a server reboot. Have not verified that the Dev and Production environments are 100% identical. I've done a cursory check and on the surface they appear to be the same (same OS and SP version). I need to do a deeper dive to be 100% certain. I had no problems in my Dev environment. In Dev, I installed Office 2010 Pro 64-bit (Excel & Office Tools only) then via command line w/ the "/passive" switch, installed Access Database Engine 2010 32-bit. I don't know what else to try. Any suggestions or comments?

Read the article

What's wrong with this vcl config for varnish-cache as load balancer?

- by dabito

I have the current configurations active on my default.vcl varnish file on the machine that balances the load for other two machines (the other two machines also have varnish active). My intention is to have this server do only the load balancing and the other machines do the processing and also their own caching. My problem is that even with the config testing (not even a stress test or anything, just a few requests a minute) I get the guru meditation error and have to restart varnish. This is the default.vcl for the load balancing server: backend vader { .host = "app1.server.com"; .probe = { .url = "/"; .interval = 10s; .timeout = 4s; .window = 5; .threshold = 3; } } backend malgus { .host = "app2.server.com"; .probe = { .url = "/"; .interval = 10s; .timeout = 4s; .window = 5; .threshold = 3; } } director dooku round-robin { { .backend = vader; } { .backend = malgus; } } sub vcl_recv { if (req.http.host ~ "^balancer.server.com$") { set req.backend = dooku; } } Am I doing something wrong or missing something? EDIT: This is varnishlog's output: 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1345839995 1.0 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1345839998 1.0 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1345840001 1.0 0 Backend_health - malgus Still sick 4--X--- 0 3 5 0.000000 3.846876 0 Backend_health - vader Still sick 4--X--- 0 3 5 0.000000 3.839194 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1345840004 1.0 14 SessionOpen c 10.150.7.151 38272 :80 14 ReqStart c 10.150.7.151 38272 458200540 14 RxRequest c GET 14 RxURL c / 14 RxProtocol c HTTP/1.1 14 RxHeader c Host: dooku-dev.excelsior.com 14 RxHeader c Connection: keep-alive 14 RxHeader c User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11 14 RxHeader c Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 14 RxHeader c Accept-Encoding: gzip,deflate,sdch 14 RxHeader c Accept-Language: en-US,en;q=0.8,es-419;q=0.6,es;q=0.4 14 RxHeader c Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 14 RxHeader c Cookie: SESSa87d6c6da0c61037a9169122dc5e4a19=HR_0Srhgc-uDArT3aJFzOBy31FtzneTXg38byr1eGMU; __atuvc=4%7C33 14 VCL_call c recv pass 14 VCL_call c hash 14 Hash c / 14 Hash c dooku-dev.excelsior.com 14 VCL_return c hash 14 VCL_call c pass pass 14 FetchError c no backend connection 14 VCL_call c error deliver 14 VCL_call c deliver deliver 14 TxProtocol c HTTP/1.1 14 TxStatus c 503 14 TxResponse c Service Unavailable 14 TxHeader c Server: Varnish 14 TxHeader c Content-Type: text/html; charset=utf-8 14 TxHeader c Retry-After: 5 14 TxHeader c Content-Length: 418 14 TxHeader c Accept-Ranges: bytes 14 TxHeader c Date: Fri, 24 Aug 2012 20:26:44 GMT 14 TxHeader c X-Varnish: 458200540 14 TxHeader c Age: 0 14 TxHeader c Via: 1.1 varnish 14 TxHeader c Connection: close 14 Length c 418 14 ReqEnd c 458200540 1345840004.916415691 1345840004.965190172 0.020933390 0.048741817 0.000032663 14 SessionClose c error 14 StatSess c 10.150.7.151 38272 0 1 1 0 1 0 256 418 14 SessionOpen c 10.150.7.151 38273 :80 14 ReqStart c 10.150.7.151 38273 458200541 14 RxRequest c GET 14 RxURL c /favicon.ico 14 RxProtocol c HTTP/1.1 14 RxHeader c Host: dooku-dev.excelsior.com 14 RxHeader c Connection: keep-alive 14 RxHeader c Accept: */* 14 RxHeader c User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11 14 RxHeader c Accept-Encoding: gzip,deflate,sdch 14 RxHeader c Accept-Language: en-US,en;q=0.8,es-419;q=0.6,es;q=0.4 14 RxHeader c Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 14 RxHeader c Cookie: SESSa87d6c6da0c61037a9169122dc5e4a19=HR_0Srhgc-uDArT3aJFzOBy31FtzneTXg38byr1eGMU; __atuvc=4%7C33 14 VCL_call c recv pass 14 VCL_call c hash 14 Hash c /favicon.ico 14 Hash c dooku-dev.excelsior.com 14 VCL_return c hash 14 VCL_call c pass pass 14 FetchError c no backend connection 14 VCL_call c error deliver 14 VCL_call c deliver deliver 14 TxProtocol c HTTP/1.1 14 TxStatus c 503 14 TxResponse c Service Unavailable 14 TxHeader c Server: Varnish 14 TxHeader c Content-Type: text/html; charset=utf-8 14 TxHeader c Retry-After: 5 14 TxHeader c Content-Length: 418 14 TxHeader c Accept-Ranges: bytes 14 TxHeader c Date: Fri, 24 Aug 2012 20:26:45 GMT 14 TxHeader c X-Varnish: 458200541 14 TxHeader c Age: 0 14 TxHeader c Via: 1.1 varnish 14 TxHeader c Connection: close 14 Length c 418 14 ReqEnd c 458200541 1345840005.226389885 1345840005.226457834 0.000026941 0.000043154 0.000024796 14 SessionClose c error 14 StatSess c 10.150.7.151 38273 0 1 1 0 1 0 256 418

Read the article

How can I recover an ext4 filesystem corrupted after a fsck?

- by Regan

I have an ext4 filesystem on luks over software raid5. The filesystem was operating "just fine" for several years when I was beginning to run out of space. I had a 9T volume on 6x2T drives. I began upgrading to 3T drives by doing the mdadm fail, remove, add, rebuild, repeat process until I had a larger array. I then grew the luks container, and then when I unmounted and tried to resize2fs I was given the message the filesystem was dirty and needed e2fsck. Without thinking I just did e2fsck -y /dev/mapper/candybox and it began spewing all kinds of inode being removed type messages (can't remember exactly) I killed e2fsck and tried to remount the filesystem to backup data I was concerned about. When trying to mount at this point I get: # mount /dev/mapper/candybox /candybox mount: wrong fs type, bad option, bad superblock on /dev/mapper/candybox, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Looking back at my older logs I noticed the filesystem was giving this error each time the machine booted: kernel: [79137.275531] EXT4-fs (dm-2): warning: mounting fs with errors, running e2fsck is recommended So shame on me for not paying attention :( I then tried to mount using every backup superblock (one after another) and each attempt left this in my log: EXT4-fs (dm-2): ext4_check_descriptors: Checksum for group 0 failed (26534!=65440) EXT4-fs (dm-2): ext4_check_descriptors: Checksum for group 1 failed (38021!=36729) EXT4-fs (dm-2): ext4_check_descriptors: Checksum for group 2 failed (18336!=39845) ... EXT4-fs (dm-2): ext4_check_descriptors: Checksum for group 11911 failed (28743!=44098) BUG: soft lockup - CPU#0 stuck for 23s! [mount:2939] Attempts to restart e2fsck results in: # e2fsck /dev/mapper/candybox e2fsck 1.41.14 (22-Dec-2010) e2fsck: Group descriptors look bad... trying backup blocks... candy: recovering journal e2fsck: unable to set superblock flags on candy At this point, I decided it best to order some more drives and make an image using ddrescue Now two weeks later I have an image of the luks partition in a .img file. # ls -lh total 14T -rw-r--r-- 1 root root 14T Oct 25 01:57 candybox.img -rw-r--r-- 1 root root 271 Oct 20 14:32 candybox.logfile After numerous attempts using everything I could find online I could not coerce e2fsck to do anything on the image, so I used mkfs.ext4 -L candy candybox.img -m 0 -S and I was able to mount the dirty filesystem readonly without the journal and recover 960G of data. It gave all kinds of errors of various directories not existing and so forth but I was able to get some stuff. Which gave me some hope! I then ran e2fsck again and it had to recreate the root inode and gave a massive list of correcting group counts, I accepted the root inode creation and said no to everything else, leaving a completely empty filesystem. Re-ran again and said yes to all questions with the same result but now a "clean" but empty filesystem. extundelete gives me 0 recoverable inodes found. And now I'm stuck again, I can't come up with any other methods other than dropping to something like photorec which will give me an absolute mess with how large the filesystem was. I'm willing to re-copy the image from the original array and start over, if I can get any suggestions or ideas on a way to get more of my files back. I wish I could give more detailed logs of the commands that have run, but the output is long scrolled passed except for what gets logged to syslog and my memory is not as detailed due to the timeframe this has occurred over. Any help is greatly appreciated!

Read the article

Installing .NET application on IIS 7.5 issues

- by Juw

Really need some help here. I am at a loss. I am trying to install a webservice that some other guy wrote in .NET. I have some basic IIS understanding. The webservice works just fine on my dev computer. But now i try to move the webservice to a production server and bad things happens. The webservice has been located in C:\inetpub\wwwroot\ dir on the dev server. But on this production server it is to be located in D:\services\ I have managed to install an application on the production server and everything seems fine and dandy. But when i "Test Settings" in the initial setup i get "Invalid application path" error. But i can just close it down and still install it. But when i try to access the webservice with: http://myserver.com/webservice/GetData nothing happens. Just a blank page and when i check the response headers...500 error. I don´t know what is going on here or where the problem is. I post the config file here so someone hopefully might notice something odd. Thanx in advance! EDIT: The config file is from my dev server. I just copied it to my production server...but that obviously didn´t work :-) UPDATE: I noticed that my dev server run in an Application pool with Net 4 and in "classic" "mode". On the production server it was in NET 4 but in "integrated" mode. So i changed it to "classic". I still get a blank page. But checking the log will output this: 2012-10-03 14:57:00 ip removed GET /boo/GetData - 80 - ip removed Mozilla/5.0+(Windows+NT+6.1;+WOW64;+rv:15.0)+Gecko/20100101+Firefox/15.0.1 404 2 1260 203 <?xml version="1.0" encoding="UTF-8"?> <configuration> <system.web> <identity impersonate="true" />  <compilation targetFramework="4.0"> <assemblies> <add assembly="System.Data.Entity, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b7735c561131e089" /> </assemblies> </compilation> <pages controlRenderingCompatibilityVersion="3.5" clientIDMode="AutoID" /> </system.web> <system.webServer> <modules runAllManagedModulesForAllRequests="true" /> <httpErrors existingResponse="PassThrough" /> <httpProtocol> <customHeaders> <add name="Access-Control-Allow-Origin" value="*" /> </customHeaders> </httpProtocol> <directoryBrowse enabled="false" /> </system.webServer> <system.serviceModel> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" /> <standardEndpoints> <webHttpEndpoint>  <standardEndpoint name="" helpEnabled="true" automaticFormatSelectionEnabled="true" /> </webHttpEndpoint> </standardEndpoints> </system.serviceModel> <connectionStrings> <add name="Entities" connectionString="metadata=res://*/DataModel.csdl|res://*/DataModel.ssdl|res://*/DataModel.msl;provider=System.Data.SqlClient;provider connection string="data source=someip;initial catalog=db_90;User ID=user1;Password=access2;multipleactiveresultsets=True;App=EntityFramework"" providerName="System.Data.EntityClient" /> </connectionStrings> </configuration>

Read the article

Tomcat and ASP site under IIS6 with SSL

- by Rafe

I've been working on migrating our companies' website from it's original server to a new one and am having two different but possibly related problems. The box this is sitting on is a Windows 2003 server x64 running IIS 6. The Tomcat version is 5.5.x as it was the version the original deployment was built on. There are two other sites on the server one in plain HTML, another in PHP and the one I am trying to migrate is a combination of Java and ASP (the introductory/sign in pages being Java as well as many reports used for our clients and the administration pages being in ASP) First of all I can only access the site if I enter the ip followed by :8080 (xxx.xxx.xxx.xxx:8080). The original setup had an index.html file in the root of the site with a bit of javascript in the header that pointed the site to 'www.mysite.com/app/public' but if I try going directly to the site without the 8080 I get a 'page not found error' and the javascript redirector causes the same problem because it doesn't add the 8080 into the URL even though on the original site the 8080 wasn't present so I don't understand why it would need it now. The js redirect looks like this: <script language="JavaScript">  </script> When setting the site up I used the command line to unbind IIS from all of the ip's on the system (there are 12 ip's on this box) because I was led to believe Tomcat wanted to use localhost which wasn't accessible. I'm not sure if this was the right thing to do but I'm throwing it in for the sake of completeness. And actually, at this point trying to go to localhost from the server itself throws up a 'could not connect to localhost' error. If I go to localhost:8080 I get the tomcat welcome page. If I do localhost:8080/app/public I get the intro page to our website. So I'm not sure what I'm even looking at in this case, that is what the proper behavior should be. The second part of the problem is that if I do go to either the ip or localhost such as above (localhost:8080/app/public) and click on our login link it is supposed to transfer me to our login page yet instead I receive a 'could not connect' error and the url has changed to localhost:8443/app/secure. From my research I see that port 8443 is Tomcats SSL port and the server.xml alludes to it as follows: <Connector port="8080" maxHttpHeaderSize="8192" maxThreads="150" minSpareThreads="25" maxSpareThreads="75" enableLookups="false" redirectPort="8443" acceptCount="100" connectionTimeout="20000" disableUploadTimeout="true" /> I have an SSL certificate assigned to the site via IIS and was under the impression that by default Tomcat allowed IIS to handle secure connections but apparently something is munged because it's not working. There is another section in the server.xml that reads like this: <Connector port="8009" enableLookups="false" redirectPort="443" protocol="AJP/1.3" /> Which I'm not sure what it is for although port 443 is the SSL port that IIS uses so I'm confused as to what this is supposed to be doing. Another question I have is when does the isap_redirector actually come into play? How does it know when to try and serve pages through Tomcat and when not to? I've hunted around the 'net for an answer and have yet to find a clear dialogue on the subject. Anyone have any pointers as to where to look for a solution to all of this?

Read the article

Configuring nginx server to handle requests from multiple domains

- by KillABug

Use Case:- I am working on a web application which allows to create HTML templates and publish them on amazon S3.Now to publish the websites I use nginx as a proxy server. What the proxy server does is,when a user enters the website URL,I want to identify how to check if the request comes from my application i.e app.mysite.com(This won't change) and route it to apache for regular access,if its coming from some other domain like a regular URL www.mysite.com(This needs to be handled dynamically.Can be random) it goes to the S3 bucket that hosts the template. My current configuration is: user nginx; worker_processes 1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; charset utf-8; keepalive_timeout 65; server_tokens off; sendfile on; tcp_nopush on; tcp_nodelay off; Default Server Block to catch undefined host names server { listen 80; server_name app.mysite.com; access_log off; error_log off; location / { proxy_pass http://127.0.0.1:8080; proxy_set_header X-Real-IP $remote_addr; proxy_set_header Host $host; proxy_redirect off; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; client_max_body_size 10m; client_body_buffer_size 128k; proxy_buffer_size 4k; proxy_buffers 4 32k; proxy_busy_buffers_size 64k; } } } Load all the sites include /etc/nginx/conf.d/*.conf; Updates as I was not clear enough :- My question is how can I handle both the domains in the config file.My nginx is a proxy server on port 80 on an EC2 instance.This also hosts my application that runs on apache on a differnet port.So any request coming for my application will come from a domain app.mysite.com and I also want to proxy the hosted templates on S3 which are inside a bucket say sites.mysite.com/coolsite.com/index.html.So if someone hits coolsite.com I want to proxy it to the folder sites.mysite.com/coolsite.com/index.html and not to app.syartee.com.Hope I am clear The other server block: # Server for S3 server { # Listen on port 80 for all IPs associated with your machine listen 80; # Catch all other server names server_name _; //I want it to handle other domains then app.mysite.com # This code gets the host without www. in front and places it inside # the $host_without_www variable # If someone requests www.coolsite.com, then $host_without_www will have the value coolsite.com set $host_without_www $host; if ($host ~* www\.(.*)) { set $host_without_www $1; } location / { # This code rewrites the original request, and adds the host without www in front # E.g. if someone requests # /directory/file.ext?param=value # from the coolsite.com site the request is rewritten to # /coolsite.com/directory/file.ext?param=value set $foo 'http://sites.mysite.com'; # echo "$foo"; rewrite ^(.*)$ $foo/$host_without_www$1 break; # The rewritten request is passed to S3 proxy_pass http://sites.mysite.com; include /etc/nginx/proxy_params; } } Also I understand I will have to make the DNS changes in the cname of the domain.I guess I will have to add app.mysite.com under the CNAME of the template domain name?Please correct if wrong. Thank you for your time

Read the article

failing to establish connection between Postgres db and gwt

- by sprasad12

Hi, I am using Postgres and gwt 2.0 for one of my applications. I am facing problem connecting to the database. When I try to connect it gives "ClassNotFoundException". Here is what I get when I try to connect to database: java.lang.ClassNotFoundException: org.postgresql.Driver at java.net.URLClassLoader$1.run(URLClassLoader.java:200) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:307) at com.google.appengine.tools.development.IsolatedAppClassLoader.loadClass(IsolatedAppClassLoader.java:151) at java.lang.ClassLoader.loadClass(ClassLoader.java:252) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320) at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java:169) at com.e.r.d.server.db.SQLManager.<init>(SQLManager.java:18) at com.e.r.d.server.db.EntityRelationManager.<init>(EntityRelationManager.java:10) at com.e.r.d.server.EntityRelationServiceImpl.<clinit>(EntityRelationServiceImpl.java:21) at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:513) at java.lang.Class.newInstance0(Class.java:355) at java.lang.Class.newInstance(Class.java:308) at org.mortbay.jetty.servlet.Holder.newInstance(Holder.java:153) at org.mortbay.jetty.servlet.ServletHolder.getServlet(ServletHolder.java:339) at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:463) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1093) at com.google.appengine.api.blobstore.dev.ServeBlobFilter.doFilter(ServeBlobFilter.java:51) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1084) at com.google.apphosting.utils.servlet.TransactionCleanupFilter.doFilter(TransactionCleanupFilter.java:43) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1084) at com.google.appengine.tools.development.StaticFileFilter.doFilter(StaticFileFilter.java:121) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1084) at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:360) at org.mortbay.jetty.security.SecurityHandler.handle(SecurityHandler.java:216) at org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181) at org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:712) at org.mortbay.jetty.webapp.WebAppContext.handle(WebAppContext.java:405) at com.google.apphosting.utils.jetty.DevAppEngineWebAppContext.handle(DevAppEngineWebAppContext.java:70) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:139) at com.google.appengine.tools.development.JettyContainerService$ApiProxyHandler.handle(JettyContainerService.java:352) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:139) at org.mortbay.jetty.Server.handle(Server.java:313) at org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:506) at org.mortbay.jetty.HttpConnection$RequestHandler.content(HttpConnection.java:844) at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:644) at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:211) at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:381) at org.mortbay.io.nio.SelectChannelEndPoint.run(SelectChannelEndPoint.java:396) at org.mortbay.thread.BoundedThreadPool$PoolThread.run(BoundedThreadPool.java:442) Mar 15, 2010 1:17:41 AM com.google.apphosting.utils.jetty.JettyLogger warn WARNING: Nested in javax.servlet.ServletException: init: java.lang.ExceptionInInitializerError at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:513) at java.lang.Class.newInstance0(Class.java:355) at java.lang.Class.newInstance(Class.java:308) at org.mortbay.jetty.servlet.Holder.newInstance(Holder.java:153) at org.mortbay.jetty.servlet.ServletHolder.getServlet(ServletHolder.java:339) at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:463) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1093) at com.google.appengine.api.blobstore.dev.ServeBlobFilter.doFilter(ServeBlobFilter.java:51) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1084) at com.google.apphosting.utils.servlet.TransactionCleanupFilter.doFilter(TransactionCleanupFilter.java:43) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1084) at com.google.appengine.tools.development.StaticFileFilter.doFilter(StaticFileFilter.java:121) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1084) at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:360) at org.mortbay.jetty.security.SecurityHandler.handle(SecurityHandler.java:216) at org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181) at org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:712) at org.mortbay.jetty.webapp.WebAppContext.handle(WebAppContext.java:405) at com.google.apphosting.utils.jetty.DevAppEngineWebAppContext.handle(DevAppEngineWebAppContext.java:70) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:139) at com.google.appengine.tools.development.JettyContainerService$ApiProxyHandler.handle(JettyContainerService.java:352) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:139) at org.mortbay.jetty.Server.handle(Server.java:313) at org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:506) at org.mortbay.jetty.HttpConnection$RequestHandler.content(HttpConnection.java:844) at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:644) at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:211) at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:381) at org.mortbay.io.nio.SelectChannelEndPoint.run(SelectChannelEndPoint.java:396) at org.mortbay.thread.BoundedThreadPool$PoolThread.run(BoundedThreadPool.java:442) Caused by: java.security.AccessControlException: access denied (java.lang.RuntimePermission exitVM.1) at java.security.AccessControlContext.checkPermission(AccessControlContext.java:323) at java.security.AccessController.checkPermission(AccessController.java:546) at java.lang.SecurityManager.checkPermission(SecurityManager.java:532) at com.google.appengine.tools.development.DevAppServerFactory$CustomSecurityManager.checkPermission(DevAppServerFactory.java:166) at java.lang.SecurityManager.checkExit(SecurityManager.java:744) at java.lang.Runtime.exit(Runtime.java:88) at java.lang.System.exit(System.java:906) at com.e.r.d.server.db.SQLManager.<init>(SQLManager.java:22) at com.e.r.d.server.db.EntityRelationManager.<init>(EntityRelationManager.java:10) at com.e.r.d.server.EntityRelationServiceImpl.<clinit>(EntityRelationServiceImpl.java:21) ... 33 more Mar 15, 2010 1:17:41 AM com.google.apphosting.utils.jetty.JettyLogger warn WARNING: Nested in java.lang.ExceptionInInitializerError: java.security.AccessControlException: access denied (java.lang.RuntimePermission exitVM.1) at java.security.AccessControlContext.checkPermission(AccessControlContext.java:323) at java.security.AccessController.checkPermission(AccessController.java:546) at java.lang.SecurityManager.checkPermission(SecurityManager.java:532) at com.google.appengine.tools.development.DevAppServerFactory$CustomSecurityManager.checkPermission(DevAppServerFactory.java:166) at java.lang.SecurityManager.checkExit(SecurityManager.java:744) at java.lang.Runtime.exit(Runtime.java:88) at java.lang.System.exit(System.java:906) at com.e.r.d.server.db.SQLManager.<init>(SQLManager.java:22) at com.e.r.d.server.db.EntityRelationManager.<init>(EntityRelationManager.java:10) at com.e.r.d.server.EntityRelationServiceImpl.<clinit>(EntityRelationServiceImpl.java:21) at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:513) at java.lang.Class.newInstance0(Class.java:355) at java.lang.Class.newInstance(Class.java:308) at org.mortbay.jetty.servlet.Holder.newInstance(Holder.java:153) at org.mortbay.jetty.servlet.ServletHolder.getServlet(ServletHolder.java:339) at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:463) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1093) at com.google.appengine.api.blobstore.dev.ServeBlobFilter.doFilter(ServeBlobFilter.java:51) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1084) at com.google.apphosting.utils.servlet.TransactionCleanupFilter.doFilter(TransactionCleanupFilter.java:43) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1084) at com.google.appengine.tools.development.StaticFileFilter.doFilter(StaticFileFilter.java:121) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1084) at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:360) at org.mortbay.jetty.security.SecurityHandler.handle(SecurityHandler.java:216) at org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181) at org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:712) at org.mortbay.jetty.webapp.WebAppContext.handle(WebAppContext.java:405) at com.google.apphosting.utils.jetty.DevAppEngineWebAppContext.handle(DevAppEngineWebAppContext.java:70) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:139) at com.google.appengine.tools.development.JettyContainerService$ApiProxyHandler.handle(JettyContainerService.java:352) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:139) at org.mortbay.jetty.Server.handle(Server.java:313) at org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:506) at org.mortbay.jetty.HttpConnection$RequestHandler.content(HttpConnection.java:844) at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:644) at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:211) at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:381) at org.mortbay.io.nio.SelectChannelEndPoint.run(SelectChannelEndPoint.java:396) at org.mortbay.thread.BoundedThreadPool$PoolThread.run(BoundedThreadPool.java:442) Mar 15, 2010 1:17:41 AM com.google.apphosting.utils.jetty.JettyLogger warn WARNING: Nested in javax.servlet.ServletException: init: java.lang.NoClassDefFoundError: Could not initialize class com.e.r.d.server.EntityRelationServiceImpl at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:513) at java.lang.Class.newInstance0(Class.java:355) at java.lang.Class.newInstance(Class.java:308) at org.mortbay.jetty.servlet.Holder.newInstance(Holder.java:153) at org.mortbay.jetty.servlet.ServletHolder.getServlet(ServletHolder.java:339) at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:463) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1093) at com.google.appengine.api.blobstore.dev.ServeBlobFilter.doFilter(ServeBlobFilter.java:51) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1084) at com.google.apphosting.utils.servlet.TransactionCleanupFilter.doFilter(TransactionCleanupFilter.java:43) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1084) at com.google.appengine.tools.development.StaticFileFilter.doFilter(StaticFileFilter.java:121) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1084) at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:360) at org.mortbay.jetty.security.SecurityHandler.handle(SecurityHandler.java:216) at org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181) at org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:712) at org.mortbay.jetty.webapp.WebAppContext.handle(WebAppContext.java:405) at com.google.apphosting.utils.jetty.DevAppEngineWebAppContext.handle(DevAppEngineWebAppContext.java:70) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:139) at com.google.appengine.tools.development.JettyContainerService$ApiProxyHandler.handle(JettyContainerService.java:352) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:139) at org.mortbay.jetty.Server.handle(Server.java:313) at org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:506) at org.mortbay.jetty.HttpConnection$RequestHandler.content(HttpConnection.java:844) at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:644) at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:211) at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:381) at org.mortbay.io.nio.SelectChannelEndPoint.run(SelectChannelEndPoint.java:396) at org.mortbay.thread.BoundedThreadPool$PoolThread.run(BoundedThreadPool.java:442) Mar 15, 2010 1:17:41 AM com.google.apphosting.utils.jetty.JettyLogger warn WARNING: /erd1/erpath java.lang.ExceptionInInitializerError at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:513) at java.lang.Class.newInstance0(Class.java:355) at java.lang.Class.newInstance(Class.java:308) at org.mortbay.jetty.servlet.Holder.newInstance(Holder.java:153) at org.mortbay.jetty.servlet.ServletHolder.getServlet(ServletHolder.java:339) at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:463) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1093) at com.google.appengine.api.blobstore.dev.ServeBlobFilter.doFilter(ServeBlobFilter.java:51) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1084) at com.google.apphosting.utils.servlet.TransactionCleanupFilter.doFilter(TransactionCleanupFilter.java:43) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1084) at com.google.appengine.tools.development.StaticFileFilter.doFilter(StaticFileFilter.java:121) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1084) at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:360) at org.mortbay.jetty.security.SecurityHandler.handle(SecurityHandler.java:216) at org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181) at org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:712) at org.mortbay.jetty.webapp.WebAppContext.handle(WebAppContext.java:405) at com.google.apphosting.utils.jetty.DevAppEngineWebAppContext.handle(DevAppEngineWebAppContext.java:70) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:139) at com.google.appengine.tools.development.JettyContainerService$ApiProxyHandler.handle(JettyContainerService.java:352) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:139) at org.mortbay.jetty.Server.handle(Server.java:313) at org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:506) at org.mortbay.jetty.HttpConnection$RequestHandler.content(HttpConnection.java:844) at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:644) at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:211) at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:381) at org.mortbay.io.nio.SelectChannelEndPoint.run(SelectChannelEndPoint.java:396) at org.mortbay.thread.BoundedThreadPool$PoolThread.run(BoundedThreadPool.java:442) Caused by: java.security.AccessControlException: access denied (java.lang.RuntimePermission exitVM.1) at java.security.AccessControlContext.checkPermission(AccessControlContext.java:323) at java.security.AccessController.checkPermission(AccessController.java:546) at java.lang.SecurityManager.checkPermission(SecurityManager.java:532) at com.google.appengine.tools.development.DevAppServerFactory$CustomSecurityManager.checkPermission(DevAppServerFactory.java:166) at java.lang.SecurityManager.checkExit(SecurityManager.java:744) at java.lang.Runtime.exit(Runtime.java:88) at java.lang.System.exit(System.java:906) at com.e.r.d.server.db.SQLManager.<init>(SQLManager.java:22) at com.e.r.d.server.db.EntityRelationManager.<init>(EntityRelationManager.java:10) at com.e.r.d.server.EntityRelationServiceImpl.<clinit>(EntityRelationServiceImpl.java:21) ... 33 more Mar 15, 2010 1:17:41 AM com.google.apphosting.utils.jetty.JettyLogger warn WARNING: Nested in java.lang.ExceptionInInitializerError: java.security.AccessControlException: access denied (java.lang.RuntimePermission exitVM.1) at java.security.AccessControlContext.checkPermission(AccessControlContext.java:323) at java.security.AccessController.checkPermission(AccessController.java:546) at java.lang.SecurityManager.checkPermission(SecurityManager.java:532) at com.google.appengine.tools.development.DevAppServerFactory$CustomSecurityManager.checkPermission(DevAppServerFactory.java:166) at java.lang.SecurityManager.checkExit(SecurityManager.java:744) at java.lang.Runtime.exit(Runtime.java:88) at java.lang.System.exit(System.java:906) at com.e.r.d.server.db.SQLManager.<init>(SQLManager.java:22) at com.e.r.d.server.db.EntityRelationManager.<init>(EntityRelationManager.java:10) at com.e.r.d.server.EntityRelationServiceImpl.<clinit>(EntityRelationServiceImpl.java:21) at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:513) at java.lang.Class.newInstance0(Class.java:355) at java.lang.Class.newInstance(Class.java:308) at org.mortbay.jetty.servlet.Holder.newInstance(Holder.java:153) at org.mortbay.jetty.servlet.ServletHolder.getServlet(ServletHolder.java:339) at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:463) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1093) at com.google.appengine.api.blobstore.dev.ServeBlobFilter.doFilter(ServeBlobFilter.java:51) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1084) at com.google.apphosting.utils.servlet.TransactionCleanupFilter.doFilter(TransactionCleanupFilter.java:43) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1084) at com.google.appengine.tools.development.StaticFileFilter.doFilter(StaticFileFilter.java:121) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1084) at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:360) at org.mortbay.jetty.security.SecurityHandler.handle(SecurityHandler.java:216) at org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181) at org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:712) at org.mortbay.jetty.webapp.WebAppContext.handle(WebAppContext.java:405) at com.google.apphosting.utils.jetty.DevAppEngineWebAppContext.handle(DevAppEngineWebAppContext.java:70) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:139) at com.google.appengine.tools.development.JettyContainerService$ApiProxyHandler.handle(JettyContainerService.java:352) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:139) at org.mortbay.jetty.Server.handle(Server.java:313) at org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:506) at org.mortbay.jetty.HttpConnection$RequestHandler.content(HttpConnection.java:844) at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:644) at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:211) at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:381) at org.mortbay.io.nio.SelectChannelEndPoint.run(SelectChannelEndPoint.java:396) at org.mortbay.thread.BoundedThreadPool$PoolThread.run(BoundedThreadPool.java:442) Mar 15, 2010 1:17:41 AM com.google.apphosting.utils.jetty.JettyLogger warn WARNING: /erd1/erpath java.lang.NoClassDefFoundError: Could not initialize class com.e.r.d.server.EntityRelationServiceImpl at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:513) at java.lang.Class.newInstance0(Class.java:355) at java.lang.Class.newInstance(Class.java:308) at org.mortbay.jetty.servlet.Holder.newInstance(Holder.java:153) at org.mortbay.jetty.servlet.ServletHolder.getServlet(ServletHolder.java:339) at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:463) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1093) at com.google.appengine.api.blobstore.dev.ServeBlobFilter.doFilter(ServeBlobFilter.java:51) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1084) at com.google.apphosting.utils.servlet.TransactionCleanupFilter.doFilter(TransactionCleanupFilter.java:43) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1084) at com.google.appengine.tools.development.StaticFileFilter.doFilter(StaticFileFilter.java:121) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1084) at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:360) at org.mortbay.jetty.security.SecurityHandler.handle(SecurityHandler.java:216) at org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181) at org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:712) at org.mortbay.jetty.webapp.WebAppContext.handle(WebAppContext.java:405) at com.google.apphosting.utils.jetty.DevAppEngineWebAppContext.handle(DevAppEngineWebAppContext.java:70) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:139) at com.google.appengine.tools.development.JettyContainerService$ApiProxyHandler.handle(JettyContainerService.java:352) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:139) at org.mortbay.jetty.Server.handle(Server.java:313) at org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:506) at org.mortbay.jetty.HttpConnection$RequestHandler.content(HttpConnection.java:844) at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:644) at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:211) at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:381) at org.mortbay.io.nio.SelectChannelEndPoint.run(SelectChannelEndPoint.java:396) at org.mortbay.thread.BoundedThreadPool$PoolThread.run(BoundedThreadPool.java:442) I have included the Postgres jar file to the build path of the project. Question: Is there anywhere else i have to include the postgre? While creating GWT project i did not uncheck app engine. is it a problem? can someone tell me what i am doing wrong? Any input will be of great help. Thank you.

Search Results

Search found 35753 results on 1431 pages for 'app dev'.

Page 411/1431 | < Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418 | Next Page >

- by harekam_taj

- by Richard Eng

- by RHR

- by Schwayday

- by user331396

- by mabutt

- by skjagini

- by Bil Simser

- by igor

- by Shaun

- by Joe Mayo

- by GhostRider

- by Tom Geee

- by AndreaNobili

- by Incognito

- by F21

- by nagylzs

- by ramdaz

- by Rayzor78

- by dabito

- by Regan

- by Juw

- by Rafe

- by KillABug

- by sprasad12

< Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418 | Next Page >