Search Results

Search found 15605 results on 625 pages for 'cached exchange mode'.

Page 411/625 | < Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418  | Next Page >

• Hardware recommendations for building an Ubuntu encrypted file server

  - by Robert Mashlan

  I would like to build a file server for my home network using Ubuntu. It will serve files from RAID1 configured disks, either in the OS or in hardware. It will be connected to a Gigabit ethernet LAN. The disks will use an encrypted file system. It will serve samba shares. I would like a recommendation on what kind of processing power/memory I would need to build a box that would be able to sustain the full capacity of the Gigabit ethernet connection in a file transfer for a single connection with the overhead of serving from an encrypted disk. I'm not looking to build a dream server, I just want enough processing capacity for high performance (and reliable) file sharing and spend as little as possible for it. This may be tangential, but what kind of hardware would I need to have a server be able to reliably go into a low power mode when no requests are being made of it?

  Read the article

• Vlan Tagging at Access Port in Switch

  - by singh

  I'm Confused from the fact that Vlan tagging is done at access port and trunk port always gets tagged packets (until its case of native vlan).But I still believe in other fact which says tagging happen only when a frame hit the trunk port which means trunk port gets untagged frame and tagging is not possible at access port. Would like to know where actually this tagging happens ? and also which command we can use to encapsulate 802.1q protocol to access port ? The way we do at trunk port is switchport trunk encapsulation dot1q Is the above command applicable for access mode also?

  Read the article

• Graphics drivers could not find compatible graphics hardware

  - by selak

  I have a desktop with Asus P5KPS/EPU motherboard and Nvidia GF 9600 GT Graphic Adapter. I just set up new windows 7. My problem is that I cannot find a good dirver for my Graphic Adapter. I've downloaded driver from Nvidia.com which say support my GF 9600 GT, but when I installed it, it said This graphics drivers could not find compatible graphics hardware. I go into safe mode, uninstall Standard Graphics Adapter that auto installed then install my Nvidia driver, still not work. Anyone can show me how to solve this problem?

  Read the article

• elastix cdr stop working

  - by dreddko

  CDR was working before 19 march. Unfortunately i dont remember what kind of changes i made to configuration, but this exactly not changes to CDR config. elastix 2.4.0 asterisk 11.7.0 mysql 5.0.95 elastix*CLI> cdr show status Call Detail Record (CDR) settings ---------------------------------- Logging: Disabled Mode: Simple /etc/asterisk/cdr.conf [general] enable=yes unanswered = yes /etc/asterisk/cdr_mysql.conf [global] hostname = localhost dbname=asteriskcdrdb password = *MYPASSWROD* user = asteriskcdruser userfield=1 ;port=3306 ;sock=/tmp/mysql.sock loguniqueid=yes mysql> SHOW GRANTS FOR 'asteriskcdruser'@'localhost'; +-----------------------------------------------------------------------------------------------+ | Grants for asteriskcdruser@localhost | +-----------------------------------------------------------------------------------------------+ | GRANT USAGE ON *.* TO 'asteriskcdruser'@'localhost' IDENTIFIED BY PASSWORD 'HASHHERE' | | GRANT ALL PRIVILEGES ON `asteriskcdrdb`.* TO 'asteriskcdruser'@'localhost' | +-----------------------------------------------------------------------------------------------+ 2 rows in set (0.00 sec)

  Read the article

• How do I program a hardware button on my laptop?

  - by daniel11

  So I have a set of touch screen buttons on the top of my laptop's keyboard, (one turns on power save mode, one disables/enables the mouse touch pad, one toggles the wifi adapter, and two turns the volume up/down). However there's another one that opened a file backup utility that came with my laptop. Since I bought my laptop, I've uninstalled that utility, rendering this button useless. Would it be possible to reprogram that button to open another file or program on my computer? And if so, what are the requirements and how would I go about doing it? Thanks in advance!

  Read the article

• Multi-monitor resolution and position settings lost after reboot

  - by SoftDeveloper

  I've had two 1280x1024 monitors running for years on an nVidia 8800GT card with no problems. I've now replaced one monitor with a new 2560x1440 one. The card seems to support both fine, however every time I reboot the resolutions and monitor positions revert to the old settings. I've tried upgrading, downgrading, stripping out and reinstalling many versions of the nvidia drivers to no avail. Logging in as another user doesn't help - same problem. Booting into another another OS (Win7 64) works OK, so it is just this OS installation. During boot up everything looks fine (ie native 2450x1440 res) until the nVidia control panel or something is loaded which flips it back into the old mode. I have no old saved nvidia profiles. I can't find anything in the registry relating to these old settings. Its driving me crazy having to set resolutions and realign monitors on every reboot! Can anybody help?

  Read the article

• Resolution of monitor is not supported by motherboard

  - by Sandesh

  I have Desktop with configuration Pentium 4,945 intel chipset board,dual booting with win 7 and ubuntu 10.10 (no graphics card) Recently i purchased Dell IN2020M 20" with native resolution of 1600x900 but my display allow maximum of 1024x768 because of this when i play any video in full screen mode it doesn't play smoothly or frames are refreshed jerkily I have tried updating my VGA driver but its doesn't helping me much. Is there any way to solve this problem ? 1if i want to replace monitor what maximum resolution should i buy ? 2if i want to upgrade(graphics card/motherboard) my desktop what is the minimum configuration to support the current system. Thanks in advance

  Read the article

• Access denied to EFS encrypted files after PC joins domain

  - by mjmarsh

  I'm experiencing strange behavior with Windows Encrypted File System: I have a machine that is in workgroup mode (not joined to a domain) I encrypt an entire directory structure on the machine (basically a folder and subfolders with data files for my application). My application writes and reads files from the encrypted file hierarchy as a local Windows user (let's call the account 'SecureUser'). This works fine I then join the PC to a domain (Let's call it 'TEST') Afterwards, processes running as the local 'SecureUser' account can't read the files it wrote originally when it was off the domain (What is also strange is that the files are listed as "read only" now and I cannot unset this flag via Windows Explorer or the command line, even though it looks like it succeeds) I then 'un-join' the PC from the domain and everything works again Is there something about changing domain membership on a PC that changes the behavior of EFS so that previously encrypted files cannot be read, even by the originating user? Thanks in advance

  Read the article

• How can I delete everything after the first column in Notepad++?

  - by Bob J

  I'm trying to get rid of everything after a column in Notepad++. Column mode is not an option. Is it possible? What I have 70.97.110.40 159 ms [n/a] 21 70.97.117.177 134 ms [n/a] 21 70.97.120.10 75 ms [n/a] 21 70.97.122.105 87 ms www.portless.net 21 70.97.122.106 89 ms www.popovetsky.org 21 70.97.122.107 95 ms www.psmythe.net 21 70.97.122.104 98 ms wasabi.prostructure.com 21 70.97.122.108 89 ms crm.prostructure.com 21 70.97.122.109 87 ms internal.prostructure.com21 What I want 70.97.110.40 70.97.117.177 70.97.120.10 70.97.122.105 70.97.122.106 70.97.122.107 70.97.122.104 70.97.122.108 70.97.122.109 Thanks

  Read the article

• Moved VM doesnt work correctly on my Ubuntu machine

  - by tinny

  Hi I have a Windows 7 VM that I have moved onto my Ubuntu 64bit host machine that is running VMware player 3.1.0. I think the VM was created on a Windows host. The problem I have is that when I login to this VM the screen goes blank and stays that way. The login screen is fine, but the desktop never correctly appears and sort of shows some strange pixelation that is all distorted. Seems like a virtual video card issue? If I boot into safe mode the desktop appears fine. Any ideas? Thanks

  Read the article

• Why does my HDD produce a high-pitched noise when the CPU is in use?

  - by CyberOptic

  I know this is strange. Some time ago, I bought a new 7200rpm HDD for my desktop system (I'll look for the model later). Every time the CPU is used, a high frequency cheep comes from the HDD. I'm sure it's the HDD because the problem does not occur if the HDD is not attached or is in energy-saving mode (I cross-checked by booting from a live CD). What could be the reason for the cheep sounds? Could it be the power supply?

  Read the article

• Microsoft mouse screws up my power settings

  - by Patriot

  Running a new computer with Windows 7 and 64-bit OS. Had a wireless Logitech mouse that worked perfectly with this set up. The mouse was old, and the buttons were sticking and causing double clicks, so I bought a new Microsoft Mobile Wireless 3000 mouse to replace it. The new mouse works perfectly, but now my screen saver is disabled and my computer won't go into sleep mode after 15 minutes as per my power setting. If I hook the Logitech mouse back up, screen saver works fine and computer goes to sleep as it should. Am I missing something, or is Microsoft's mouse just junk. Got no software with the new mouse, so no drivers seem available.

  Read the article

• CentOS Can't connect to FTP

  - by Steven

  I'm having troubles connecting to my ftp server. Here's what it says, Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/home/sxxxn" Command: TYPE I Response: 200 Switching to Binary mode. Command: PASV Error: Connection timed out Error: Failed to retrieve directory listing My vsftpd.conf file: local_enable=YES write_enable=YES local_umask=022 dirmessage_enable=YES xferlog_enable=YES connect_from_port_20=YES ftpd_banner=Welcome to xxxx.com xferlog_std_format=NO chroot_local_user=NO chroot_list_enable=NO chroot_list_file=/etc/vsftpd/chroot_list listen=YES pasv_enable=YES pasv_min_port=3000 pasv_max_port=3050 pasv_address=64.xx.xx.xxx pam_service_name=vsftpd userlist_enable=YES userlist_deny=NO userlist_file=/etc/vsftpd/vsftpd.userlist And I've got these 2 in my iptables -A INPUT -p tcp -m tcp --dport 21 -j ACCEPT -A INPUT -p tcp -m tcp --dport 3000:3050 -j ACCEPT I've also disabled selinux.

  Read the article

• Why does internet explorer 8 fail to locate jpg files that other browsers can find?

  - by user278457

  The following URL doesn't display for me in Internet Explorer 8. I even tried compatibility mode and it didn't fix the issue. http://beat.com.au/sites/default/files/images/_DSC5596.jpg It appears just fine in Chrome/Safari/Firefox. I suspect it has something to do with the filename starting with _ but that seems like a fairly big stretch to me. Is this error repeatable on other people's computers? And why on earth would such a strange thing happen anyway?

  Read the article

• Trying to launch old game using wine

  - by rhon

  I'm using wine 1.5.11 on Archlinux, and I try to launch this old game : http://www.cnetfrance.fr/telecharger/waterboy-11006056s.htm?download=1 The problem is that I always get a "Run-time error '13' : Type mismatch" when I try to launch it. I've tried to switch oleaut.dll and ole32.dll to "native", and switch to "Windows 98" mode using winecfg, and then I had this error : err:module:import_dll Library ole32.dll (which is needed by L"Z:\\games\\WaterBoy\\MSVBVM50.DLL") not found err:module:import_dll Library OLEAUT32.dll (which is needed by L"Z:\\games\\WaterBoy\\MSVBVM50.DLL") not found err:module:import_dll Library MSVBVM50.DLL (which is needed by L"Z:\\games\\WaterBoy\\WaterBoy.exe") not found err:module:LdrInitializeThunk Main exe initialization for L"Z:\\games\\WaterBoy\\WaterBoy.exe" failed, status c0000135 I've installed vb5runtime using winetricks, but it didn't help. Am I doing something wrong ?

  Read the article

• Windows has automatically mapped my network drives to my local disk - how do I stop it doing so?

  - by cyborg

  Windows XP decided when I logged on that because the network was unavailable at the time that two of my network drives should be mapped to my local drive so that data would be saved. All well and good but I need it to stop now so I can use my network drives again. I can't find anything relating to the feature but I can't remember the specifics of the message it gave me when it started this operating mode and Google searches for the sort of terms above leads me to a slew of irrelevancies. Any ideas? Thanks.

  Read the article

• Vim Misbehaving

  - by zchtodd

  I'm not sure what changed, but lately Vim has been driving me nuts. Whenever I try to do a column mode insert, vim takes my current character and adds to the last character I inserted. For example, the first time I do a block comment by inserting # on multiple lines, it works fine. The next time, however, I end up with ## inserted on every line, and the problem just compounds from there. To do this, I'm hitting Ctrl-V, down or up arrow, Shift-I, #, and then Esc. This worked for months, but now it seems to be pasting extra stuff in. I've tried disabling all .vimrc files, but the behavior remains the same. Any ideas?

  Read the article

• Is 50% download speed on a wireless G network normal?

  - by Bartlomiej Skwira

  I have a wired connection of about 36Mb/s, but my wireless speed is max at about 18-19Mb/s. I have a WRT54G-TM (T-Mobile, 802.11G) router with DD-WRT firmware - I've upgraded it to latest build. Done some settings changes: changed channel - 13 wireless network mode - G-only ACK Timing - 0 Fragmentation Threshold and RTS Threshold - 2304 Basic Rate - All Signal/Noise ratio: -46/-94, signal quality ~50-60%. Is this normal with G networks? Edit: The AP is located about 2 meters from laptop, no walls or metal objects, but its next to a TV. I've done a channel scan (had problems locating it, go to "Status - Wireless - Site survey" - lame naming) and everybody else is on channels 1 and 6. Switched to channel 11 but it didn't help. As for trasmit power I got best results with default 71mw. The antenna might be a factor, I'm using the default 2 antennas.

  Read the article

• Switch to switch encryption over a wireless bridge (TrustSec?)

  - by metatheorem

  I am planning to connect an existing Cisco 3750 switch to a 3560C switch over a wireless PTP bridge. The bridge will be WPA2 protected, but I am looking for an additional measure of security between the switches to prevent other wireless access through either switch. They do not support IPSec, only 802.1Q tunnels, and buying additional hardware is not likely an option. I am looking into using TrustSec manual mode between the switches. After some effort reading into TrustSec and MACsec, I am mostly certain this is a good choice over the wireless bridge, keeping in mind it is a shared medium. Two questions: Can I reliably prevent other wireless traffic from accessing the switches using TrustSec? Does anyone know of any better options with the 3000 series switches?

  Read the article

• Altering specific configuration values in the On-Screen Keyboard of Windows 7

  - by fnst

  I have to use the On-Screen Keyboard of Windows 7 for typing: (In case you haven't used it yet, you can get it via: All Programs - Accessories - Ease of Access - On-Screen Keyboard or simply search for "osk.exe") It offers a feature to "hover" about the buttons. Microsoft describes it as the following: In hovering mode, you use a mouse or joystick to point to a key for a predefined period of time, and the selected character is typed automatically. There is my specific problem. The predefined period of time is too long to be useful for me. The minimum amount of time is 0.5 seconds (max. 3 seconds). Is there any way to alter this value to something < 0.5? For example via editing the registry? Edit: The entry *'HKEY_CURRENT_USER\Software\Microsoft\Osk\HoverPeriod'* cannot be set lower than 500 ms. Any helpful tip would be great!

  Read the article

• I can see markup characters in vim `:help`

  - by Relax

  I just created a .txt file inside .vim/doc for documenting one little function of my .vimrc, ran :helptags ~/.vim/doc and apparently the whole vim help system went wild. Now, if I open for example :help help, I see things like: This also works together with other characters, for example to find help for CTRL-V in Insert mode: > :help i^V < (notice the < and characters). I can also see the ~ at the end of headlines and the modeline at the end of the help page (thinks like vim:tw=78:ts=8:ft=help:norl:). I have no idea about what happens or how to fix it. Any clue? Thanks in advance!

  Read the article

• URGENT: help recovering lost data

  - by Niels Kristian

  I have made a directory: sudo mkdir /ssd, the directory was supposed to be mounted to a raid array called md3. This was done by adding /dev/md3 /ssd auto defaults 0 0 to fstab. Then after a while where I had used the directory, I realized that I had forgotten to run sudo mount -a - and then I did, and now the data is gone. I tried to uncomment the line in fstab and run sudo mount -a but that didn't get back my data. What can I do!? CONTENT OF FSTAB: proc /proc proc defaults 0 0 none /dev/pts devpts gid=5,mode=620 0 0 /dev/md/0 none swap sw 0 0 /dev/md/1 /boot ext3 defaults 0 0 /dev/md/2 / ext4 defaults 0 0 /dev/md3 /ssd auto defaults 0 0

  Read the article

• Mac OS X 10.6.8 - Can't remove SophosUpdate Packages/Folders on Desktop

  - by Greg_the_Ant

  Every day a new "SophosUpdate" folder/package will appear on my desktop (see screenshot). When I highlight it my trash can turns into an eject button. When I drag them to the eject button nothing happens. Also nothing happens when I right click one of them and select "eject". The only thing that got rid of them once was starting up in safe mode but they keep coming back after that. Does anyone know what I can do? I'm stuck.

  Read the article

• Bootcamp: setup of Windows 7 (64 bit) hanging at "disk.sys"

  - by Skade

  I am having trouble getting Windows 7 Professional (64bit) to install on a Macbook Pro (late 2010 model). The installer hangs when loading the setup from disk. When restarting, I get an option to boot Windows from disk. The installer then starts loading files from disk and suddenly hangs. Using "Safe Mode" (from the advanced menu), it tells me that the installer hangs when loading "disk.sys". The installation is made on a fresh Bootcamp partition, the disk uses GPT. Has anyone seen this before and maybe found a solution?

  Read the article

• Puppet - pass variable with a file create command

  - by Tim Brigham

  I need a way to pass a given variable - lets say thearch - to several different files within a given class. I need to be able to state the contents of this variable for each file individually. I have tried the following: file { "xxx": thearch => "i386", path => "/xxx/yyyy", owner => root, group => root, mode => 644, content => template("module/test.erb"), } This doesn't pass this variable so I can use it with a <%=thearch% statement within the erb file as I expect. What am I doing wrong here?

  Read the article

< Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418  | Next Page >