Search Results

Search found 18380 results on 736 pages for 'index usage'.

Page 411/736 | < Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418  | Next Page >

  • Using VLC to Unicast High Definition Webcam over local gigabit LAN with low/zero delay

    - by Robin Day
    We're setting up a webcam "window" between two offices in the same buildilng. The two PC's are connected to the same gigabit switch. We're using VLC to stream the webcam over HTTP using the following commands. vlc dshow:// :dshow-caching="0" :dshow-size="640x480" :sout=#transcode{vcodec=h264,vb=0,scale=0}:http{mux=ffmpeg{mux=flv},dst=:8080/} :no-sout-rtp-sap :no-sout-standard-sap :ttl=1 :sout-keep vlc http://192.168.0.1:8080 :http-caching="0" Even with the caching set to zero, the delay in the image is a good 2-3 seconds. The CPU usage of each pc is also maxed. I'm guessing it's the transcoding that's causing much of the delay. Can anyone give me some changes to these command lines that will reduce the transcoding power, or send the webcam over a different protocol, or anything that will reduce the delay of the cameras? Bandwidth is not an issue at all as the pc's can be connected to a dedicated switch/vlan if required.

    Read the article

  • How to handle authorization in the view layout

    - by mathk
    Authorize attribute are good to do some access control base on Action but suppose that I have some UI element in the layout that should note be output unless the user is authorize. I could possibly set some boolean in the ViewBag but that is not the good solution I guess. Somewhere in the Layout.cshtml: @if (ViewBag.IsAuthorized) { <li>@Html.ActionLink("Index", "Admin")</li> } Let me know if there is a better solution. Thanks.

    Read the article

  • Using .htaccess to force https on all requests in Zend MVC

    - by davykiash
    I have been battling with .htaccess to get all the requests to use https on my Zend MVC. What am seeing is that SSL turns "on" and then goes "off" as the page loads. Below is my .htaccess file. SetEnv APPLICATION_ENV production RewriteEngine On RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] RewriteRule ^.*$ index.php [NC,L] RewriteEngine On RewriteCond %{HTTPS} off RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI} What do I need to adjust to get my https working properly?

    Read the article

  • Still failing a function, not sure why...ideas on test cases to run?

    - by igor
    I've been trying to get this Sudoku game working, and I am still failing some of the individual functions. All together the game works, but when I run it through an "autograder", some test cases fail.. Currently I am stuck on the following function, placeValue, failing. I do have the output that I get vs. what the correct one should be, but am confused..what is something going on? EDIT: I do not know what input/calls they make to the function. What happens is that "invalid row" is outputted after every placeValue call, and I can't trace why.. Here is the output (mine + correct one) if it's at all helpful: http://pastebin.com/Wd3P3nDA Here is placeValue, and following is getCoords that placeValue calls.. void placeValue(Square board[BOARD_SIZE][BOARD_SIZE]) { int x,y,value; if(getCoords(x,y)) { cin>>value; if(board[x][y].permanent) { cout<< endl << "That location cannot be changed"; } else if(!(value>=1 && value<=9)) { cout << "Invalid number"<< endl; clearInput(); } else if(validMove(board, x, y, value)) { board[x][y].number=value; } } } bool getCoords(int & x, int & y) { char row; y=0; cin>>row>>y; x = static_cast<int>(toupper(row)); if (isalpha(row) && (x >= 'A' && x <= 'I') && y >= 1 && y <= 9) { x = x - 'A'; // converts x from a letter to corresponding index in matrix y = y - 1; // converts y to corresponding index in matrix return (true); } else if (!(x >= 'A' && x <= 'I')) { cout<<"Invalid row"<<endl; clearInput(); return false; } else { cout<<"Invalid column"<<endl; clearInput(); return false; } }

    Read the article

  • Getting "uninitialized constant" in Rails app

    - by Robert McCabe
    I'm new to Rails and feeling my way, but this has me stumped. I moved some constants to a separate module ie: module Fns Fclick = "function() { alert(\"You clicked the map.\");}\n" ... end then in my controller added: require "fns" class GeomapController < ApplicationController def index fstring = Fns::Fclick ... end but when I run the server I get: uninitialized constant Fns::Fclick what am I missing?

    Read the article

  • Fixed top element and anchors

    - by elmarco
    With the following CSS, anchor links end up being hidden by the navigation bar. What solution would you proposed to have the anchor link text being shown just under it? /* style and size the navigation bar */ table.navigation#top { position: fixed; margin-top: 0; margin-bottom: 0; top: 0; left: 0; z-index: 10; } thanks

    Read the article

  • google maps marker draggable doesn't work

    - by ArmenGrigoryan
    I try all methods but in my google map on the marker doesn't work events, I try enable events and write (clickable: true), but it did not help, in test server working good, but on phpfox marker not clickable, help me please correct it go to it http://iguansystems.com/phpfoxdev/index.php?do=/pages/24/quickstart/step2/ link login - [email protected], and pass- tryuser in center frontend right at "Primary Venue" have "Can't find venue? Add New" click on "Add New" and window with a map open

    Read the article

  • Searching temporal data

    - by user321299
    I developing an application (in C#) where objects are active under a period of time, they have from and to properties of DateTime-type. Now I want to speed up my search routine for queries like: Are there other active objects in this timeperiod/at this time. Is there any existing temporal index I can use or can I use QuadTree/other tree-structures to search in an efficient way.

    Read the article

  • Deployment from OVA format

    - by Manvendra Bele
    I am deploying a VM using a OVA format. The size of OVA format is 57 GB. Currently free space on my datastore is 388 GB. At the time of selecting Disk Format type if shows me in red that the disk size required is 1 TB therefore you cannot select THICK provisioning. Therefore, i selected THIN provisiong. It THIN provisioing i am showed that Estimated Disk Usage is 112 GB which is less than the free space available. But even after selecting THIN proviosing at the time of deployment it throws an error that it cannot create disk as the size of disk is larger than the maximum specified limit. My block size is of 1 MB. Pasting my exact error here: Failed to deploy OVF package:File [datastore1] IMS Tester 1/IMS Tester1_2.vmdk is larger than maximum size supported by datastore 'datastore1

    Read the article

  • How to select the account on the login screen of Windows7 by start typing the name?

    - by akira
    When MacOS boots up and the users is prompted to select the account (s)he wants to login into, the users can either click the name / icon of the account with the mouse or just type in the name of the account. I want to do the same at the login screen of Windows7: Login screen pops up, I start to type my account name, I select the account with enter and then I type the password and enter again. No usage of the mouse involved. (I am aware of tab-cycling and hard-to-follow-the-almost-invisible-marker-of-where-the-focus-is-right-now)

    Read the article

  • Why does HDTune report better performing drives 2 months after installing them?

    - by Rolnik
    OK, so this is really weird. I ran HDTune on a newly set-up home-built computer and got the following readings from my drives in mid-November. SSD 154 MB/s RAID1 87 RAID0 198 (software installs) RAID0 98 Swap drive Today, in January, I run HDTune (same version) and get these results, in MB/s: SSD 186 RAID1 98 RAID0 241 RAID0 98 (Swap drive) Here are more details that HDTune reports on the SSD drive: HD Tune: OCZ-VERTEX Benchmark Blockquote Transfer Rate Minimum : 135.4 MB/sec Transfer Rate Maximum : 219.4 MB/sec Transfer Rate Average : 185.7 MB/sec Access Time : 0.1 ms Burst Rate : 187.3 MB/sec CPU Usage : -1.0% To get to my question: Why are my hard drives improving in performance? Most of my logical drives are in some form of RAID, except for the SSD. Will this performance ever deteriorate? Note, none of my drives are a hybrid drive that uses some form of SSD to enhance the write/reads on actual platters.

    Read the article

  • Is there a free tool/package that can monitor web traffic and display URLS accessed? [closed]

    - by Anthony
    I couldn't find a similar question but then maybe I am searching for the wrong terms. A few years ago I used a router like device, I'm pretty sure it was a SonicWall, that did this on a clients site. Basically all traffic would be routed through this device and it allowed the manager/administrator to inspect web usage of the workers, determine how often certain resources were accessed and block them if necessary (much like content filter). It showed reports based on domain name reached etc. Facebbok.com, Bebo.com and so on. It also displayed the usual IP traffic information etc. it was a UTM also. I have tried Endian firewall, with it's NTOP install, but I don't think that will show URLs browsed. Maybe I just haven't found it in NTOP yet? I need this to troubleshoot connection and traffic issue at my home, with about twenty devices/users so didn't want to buy a dedicated solution and have spare hardware to use a community product.

    Read the article

  • Question regarding MySQL indices and their functionality

    - by user281434
    Hi Say I have an ordinary table in my db like so ---------------------------- | id | username | password | ---------------------------- | 24 | blah | blah | ---------------------------- A primary key is assigned to the id column. Now when I run a Mysql query like this: SELECT id FROM table WHERE username = 'blah' LIMIT 1 Does that primary key index even help? If I am telling it to match usernames, then shouldn't the username column be indexed instead? Thanks for your time

    Read the article

  • Show Hide Subnav

    - by Jon
    How can I toggle the subnav for each item, and if one is open, hide the open one to show the current one? If there are none shown, just toggle. If you click one and show subnav then and click another hide previous and show current. Here is my html - <header> <div class="content-wrapper"> <div class="user-menu-wrapper"> <div class="hsn-logo"></div> <div class="user-greeting-wrapper"> <div class="user-greeting">Hi, Abraham</div> </div> <div class="user-menu"> <ul class="user-menu-items"> <li>@Html.ActionLink(" ", "Index", "Home", new { @class = "my-account" })</li> <li>@Html.ActionLink(" ", "Index", "Home", new { @class = "my-favorites" })</li> <li>@Html.ActionLink(" ", "Index", "Home", new { @class = "my-bag" })</li> </ul> </div> </div> <div class="hsn-nav-wrapper"> <div class="hsn-nav"> <ul class="hsn-nav-items"> <li style="width: 25%"> <a class="shop" href="#"> <span class="hsn-nav-item-wrap"> <span>SHOP</span><span class="drop-down-arrow"></span> </span> </a> </li> <li style="width: 25%"> <a class="watch" href="#"> <span class="hsn-nav-item-wrap"> <span>WATCH</span><span class="drop-down-arrow"></span> </span> </a> </li> <li style="width: 25%"> <a class="play" href="#"> <span class="hsn-nav-item-wrap"> <span>PLAY</span><span class="drop-down-arrow"></span> </span> </a> </li> <li style="width: 15%"> <a href=""><span class="hsn-search-icon"></span> </a> </li> </ul> </div> <br class="clear" /> </div> </div> </header> <subnav id="shop" class="shop-subnav"> <div class="hsn-subnav-wrapper"> <div class="hsn-subnav"> <div class="hsn-subnav-left"> <ul> <li>SubnavItem</li> <li>SubnavItem</li> <li>SubnavItem</li> <li>SubnavItem</li> <li>SubnavItem</li> <li>SubnavItem</li> <li>SubnavItem</li> <li><span class="hsn-subnav-callout">Deals</span></li> </ul> </div> <div class="hsn-subnav-right"> <ul> <li>SubnavItem</li> <li>SubnavItem</li> <li>SubnavItem</li> <li>SubnavItem</li> <li>SubnavItem</li> <li>SubnavItem</li> <li>SubnavItem</li> <li><span class="hsn-subnav-callout">Clearance</span></li> </ul> </div> </div> </div> </subnav> <subnav id="watch" class="watch-subnav"> <div class="hsn-subnav-wrapper"> <div class="hsn-subnav"> <div class="hsn-subnav-left"> <ul> <li>SubnavItem2</li> <li>SubnavItem2</li> <li>SubnavItem2</li> <li>SubnavItem2</li> </ul> </div> <div class="hsn-subnav-right"> <ul> <li>SubnavItem2</li> <li>SubnavItem2</li> <li>SubnavItem2</li> <li>SubnavItem2</li> </ul> </div> </div> </div> </subnav> Here is my Jquery / JS - $(document).ready(function () { $('ul.hsn-nav-items li a').click(function () { var navitem = $(this).attr('id') , id = $(this).attr('class') , subnav = $('subnav.' + id + '-subnav'); $('a.selected').not(this).removeClass('selected'); $(this).toggleClass('selected'); $('#'+id).toggle(); }); });

    Read the article

  • <object> for PDF is blocking drop-down menu

    - by Tumharyyaaden
    URL: http://hartford.uconn.edu/director/academic_plan.html It is an HTML page, and using to display PDF document. Which is blocking the jQuery drop down menu. I have tried using CSS z-index property with positioning specified. Also tried setting wmode="transparent" / wmode="opaque" / and other variations but nothing seems to work.

    Read the article

  • Loading Ajax within a Google Maps InfoWindow

    - by McCrum
    I have put together a 5 star rating system using PHP and Ajax which will write the rating into a database. (See link below) http://andrewmccrum.com/maps/rate/5star.php I want this rating system to work within a Google Maps InfoWindow but at the minute I can only get the InfoWindow to read and display the rating. It will not let the user vote like the top link. And I have no idea why www.andrewmccrum.com/maps/database/index.php

    Read the article

  • How do I get the Jetty 6 FileServerXml example to work?

    - by Norm
    I have followed along with the Tutorial and the examples. Yet I always get this error when I copy and paste the code: Exception in thread "main" java.lang.NullPointerException at net.test.FileServerXml.main(FileServerXml.java:13) In Eclipse I have the directory structured as such: package net.test -FileServerXml.java -fileserver.xml -index.html FileServerXml.java package net.test; import org.mortbay.jetty.Server; import org.mortbay.resource.Resource; import org.mortbay.xml.XmlConfiguration; public class FileServerXml { public static void main(String[] args) throws Exception { Resource fileserver_xml = Resource.newSystemResource("fileserver.xml"); XmlConfiguration configuration = new XmlConfiguration(fileserver_xml.getInputStream()); Server server = (Server)configuration.configure(); server.start(); server.join(); } } ` fileserver.xml `<?xml version="1.0"?> <Call name="addConnector"> <Arg> <New class="org.eclipse.jetty.server.nio.SelectChannelConnector"> <Set name="port">8080</Set> </New> </Arg> </Call> <Set name="handler"> <New class="org.eclipse.jetty.server.handler.HandlerList"> <Set name="handlers"> <Array type="org.eclipse.jetty.server.Handler"> <Item> <New class="org.eclipse.jetty.server.handler.ResourceHandler"> <Set name="directoriesListed">true</Set> <Set name="welcomeFiles"> <Array type="String"><Item>index.html</Item></Array> </Set> <Set name="resourceBase">.</Set> </New> </Item> <Item> <New class="org.eclipse.jetty.server.handler.DefaultHandler"> </New> </Item> </Array> </Set> </New> </Set> ` Thanks for your input. Norm

    Read the article

  • Android Soft Keyboard value using array

    - by Shubh
    Hi friends, Yet I use Soft Keyboard sample from http://developer.android.com/resources/samples/SoftKeyboard/index.html Here we uses ASCII value from XML ,now at the place of XML I want to generate these value using array. How can I do this Thanks in Advance

    Read the article

  • ruby search drop down

    - by cesia
    I have a drop down list of Type in my Products model. I want to be able to search in the Products index.html.erb so a user selects a type from a drop down list, clicks search and all the products matching that type are returned. I can get normal search methods working where the user enters in their search in a text box but I cannot get it working when they just select from a dropdown. Can anyone help?

    Read the article

  • Web Farm Application deployment best practices

    - by rauts
    Hi All, We are having a web farm which hosts multiple ASP.Net applications. We typically have 4 servers on the farm. The dilemma which i am having is in terms of capacity issue of the farm. Lets say i have currently got 200 apps in total. Should I deploy all 200 apps on all 4 servers (i.e. all the servers in the farm are identical) or should i split the applications between 2 sets of server and create 2 smaller farms so that i can then manage the application based on its criticality and usage etc. Any best practices in this area would be highly appreciated. Thanks Rauts

    Read the article

  • How do I Scroll parent page to top when child page is click within iframe?

    - by Evan
    Hello, When someone clicks on a link within an iframe (child page), how do I get the parent page to scroll to the top? The issue is the child page will remain in the same spot of the page, because the iframe has a lot of height larger than the parent page. Please note: the parent and child pages are on different sub domains. I created a demo to show this: http://www.apus.edu/_test/iframe/index.htm

    Read the article

  • From mod_rewrite to isapi_rewrite

    - by Ty
    Hi, I have a Modx htaccess file which needs to be rewritten from mod_rewrite to isapi_rewrite 2. Can someone please help me? The following lines need to be changed for isapi_rewrite 2: Options +FollowSymlinks RewriteEngine On RewriteBase / RewriteCond %{HTTP_USER_AGENT} ^.internal\ dummy\ connection.$ [NC] RewriteRule .* - [F,L] RewriteRule ^(manager|assets) - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ index.php?q=$1 [L,QSA] Many thanks.

    Read the article

< Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418  | Next Page >