Search Results

Search found 13752 results on 551 pages for 'ip protocol'.

Page 411/551 | < Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418  | Next Page >

• Windows Server 2008 SOMETIMES blocks connection to an FTP Site

  - by ssilver2k2

  Hello Everyone Recently, our company has been having issue connecting to a special FTP server that we use offsite to upload small files. We can connect to the test server perfectly fine, but when we use the production ftp, it only randomly connects. If I plug my laptop directly into the modem and pull one of our other static IP addresses, I can connect just fine, but if I use our internal network, it is hit or miss. Also, turning OFF the firewall does NOT change the status of our connection problems. It will still time out. The weird issue is that it sometimes works, and when it does, it instantly asks for credentials and logs us on for that session, but if we disconnect and try again, it may or may not work. This also coincidentally occurred after uninstalling hamachi, and it blew away our internet settings on our Windows Server 2008 box, but everything else is working fine, and it was working fine before hamachi was installed.

  Read the article

• I can only see the first website alphabetically

  - by Victor

  I have 3 subdomains websites. Those are subdomain1.mydomain.com, subdomain2.mydomain.com, subdomain3.mydomain.com. I have point these to the external IP address. bind is ok, dig is onerror, Apache2 reload ok 1.) If I set the following, I can only see the first one alphabetically. NameVirtualHost *:80 <VirtualHost *:80> ServerName subdomain1.mydomain.com ... <VirtualHost *:80> ServerName subdomain2.mydomain.com ... 2.) If I set the following, I get file not found. Apache2 reload ok. NameVirtualHost mydomain.com:80 <VirtualHost mydomain.com:80> ServerName subdomain1.mydomain.com ... <VirtualHost mydomain.com:80> ServerName subdomain2.mydomain.com Please Help! What else should I do.

  Read the article

• test if master dns has trasnfered copt to slave

  - by su55

  Hello, I setup my master and slave using freebsd. im currently running the Bind 9.X version, so far everything is working successfully. Just one small problem. I cant get the master copy of my dns to transfer it to the slave server. i included transfer-allow {192.168.1.111;}; // this is the slave servers ip i ran the rndc reload command to check but i dont see the copy in the /etc/named/master/? Any help would be necessary and if you like the layout of my dns, I can provide that too.

  Read the article

• Ping Flooding in router log

  - by Freeman

  I've had recently a period of repeated disconnections from my router with connection problems. I checked my router log I found several Ping Flooding entries all originating from the IP 69.171.227.232 which turned out to be one of Facebook IPs! I'm wondering what does that means? Can Facebook chat cause such a condition? My router is DLink dir 600 and the condition that devices were disconnected from router, not router from internet.. Connection is WAN And how to solve this router problem?? My wifi clients were about 3-5 at that time..

  Read the article

• spam email forwarding by server

  - by kikio

  Let's start with this scenario: We have a mailbox (i.e. in yahoo), every message is sent by this account, marked as spam by Gmail spam filter. (because the address or sender IP is blacklisted, not because of content) There is a server which is able to forward incoming messages to another address (email forwarding), for example, to a Gmail mailbox. And it is not blacklisted. The question is: If we send a message, through the dirty mailbox to the server, and server forward it to a Gmail mailbox, will it marked as spam by spam filters?

  Read the article

• virtualbox port forwarding - firewall config

  - by Roose

  i have a ubuntu host system with virtualbox running a windows server. In Virtualbox i have configured the network with a NAT interface and port forwarding for the RDP deamon running inside the vm. That works really well - i can connect to the windows rdp service over the internet. TCP *:3389 - *:3389 Now i like to restrict the access to the rdp service to only 3 public ip addresses and have no idea how to do that via iptables / shorewall. Something like: ACCEPT net:91.x.x.x fw tcp 3389 (shorewall rule) isn't working. Would be glad for any hint.

  Read the article

• Apache: How can I make my localhost on 192.168.1.101 visible from 192.168.1.102?

  - by takpar

  Hi, I've setup a Apache web server on Ubuntu Linux. I can see http://localhost well. But I can't see localhost from other machines in my network using IP address: http://192.168.1.101 I added the lines below to my apache conf: `Allow from 192.168.1` but it did not work. It says "the connection has timed out". what should i do? PS: adp@adp-desktop:~$ sudo netstat -ap | grep apache tcp 0 0 *:www *:* LISTEN 10581/apache2 tcp 0 0 localhost:www localhost:46017 ESTABLISHED 10586/apache2

  Read the article

• Accessing VMware Player across the network

  - by Tiffany Walker

  My network: 192.168.2.2 (computer) 255.255.255.0 (mask) 192.168.2.254 (gateway) The VMplayer is: 192.168.233.129 (ip) 255.255.255.0 (mask) 192.168.233.255(bcast) It's obvious the player can't be access from other systems because of the wrong network settings. However, I am not sure as to how to change that. Obviously I have to edit the ifcg-eth0 but I know I also need to edit it on the host system to make it accessably. Is this done from inside VMware Player? Or do I need to edit the network devices? The host box is Windows. Inside VMware is Linux.

  Read the article

• One vs. many domain user accounts in a server farm

  - by mjustin

  We are in a migration process of a group of related computers (Intranet servers, SQL, application servers of one application) to a new domain. In the past we used one domain user account for every computer (web1, web2, appserver1, appserver2, sql1, sqlbackup ...) to access central Windows resources like network shares. Every computer also has a local user account with the same name. I am not sure if this is necessary, or if it would be easier to configure and maintain to use one domain user account. Are there key advantages / disadvantages of having one single user account vs. dedicated accounts per computer for this group of background servers? If I am not wrong, one advantage besides easier administration of the user account could be that moving installed applications and services around between the computers does not require a check of the access rights anymore. (Except where IP addresses or ports are used)

  Read the article

• nginx automatic failover load balancing

  - by robinmag

  Hi, I'm using nginx and NginxHttpUpstreamModule for loadbalancing. My config is very simple: upstream lb { server 127.0.0.1:8081; server 127.0.0.1:8082; } server { listen 89; server_name localhost; location / { proxy_pass http://lb; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } } But with this config, when one of 2 backend server is down, nginx still routes request to it and it results in timeout half of the time :( Is there any solution to make nginx to automatically route the request to another server when it detects a downed server. Thank you.

  Read the article

• Bind dns server in Solaris 10 and win xp clients

  - by stevecomptech

  Hi, Added this in zone db file, I am running solaris 10 _ldap._tcp.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.mydomain.com. SRV 0 0 88 dc.mydomain.com. _ldap._tcp.dc._msdcs.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.dc._msdcs.mydomain.com. SRV 0 0 88 host.mydomain.com. Now I get this error when I try to join win xp to the domain The query was for the SRV record for _ldap._tcp.dc._msdcs.mydomain.com The following domain controllers were identified by the query: host.mydomain.com Common causes of this error include: Host (A) records that map the name of the domain controller to its IP addresses are missing or contain incorrect addresses. Domain controllers registered in DNS are not connected to the network or are not running. What do I need to change in order my win xp join the domain

  Read the article

• Remote connection to Mysql not working

  - by Fillipe Silva

  We have an application running with CodeIgniter and MySQL in cestacerta.com. Ther are two versions: One that is in production and it works perfectly, and one that is our Development version. This runs locally on my machine and the other developers. The development version needs to remotely connect to the database, and it rather suddenly stopped working. I've given permission to access any IP settings on the server. I can access the database through the MySQL Gui Tools. I have tested access to several different codes, including a newly downloaded version of CodeIgniter and always got the same error: "A Database Error Occurred Unable to connect to your database server using the provided settings. Filename: C: \ xampp \ htdocs \ cestacerta \ system \ database \ DB_driver.php Line Number: 119 " What troubleshooting steps can I take determine if the error is on our workstations (which all have the same error) or on our server.

  Read the article

• VPN is working, except for DNS lookups. Firewall (Cisco ASA 5505) issue?

  - by macke

  I've got the following set up: LAN -> DHCP / DNS / VPN server (OSX 10.6) -> Cisco ASA 5505 -> WAN Connecting to the LAN via VPN works fine. I get all the details properly and I can ping any host on the internal network using their IP. However, I can't do any host lookups whatsoever. I've looked through the logs on and found this nugget in the firewall log: 3 Sep 08 2010 10:46:40 305006 10.0.0.197 65371 portmap translation creation failed for udp src inside:myhostname.local/53 dst inside:10.0.0.197/65371 Port 53 is dns services, no? Because of that log entry, I'm thinking that the issue is with the firewall, not the server. Any ideas? Please keep in mind that I have very little knowledge and experience with this kind of firewall and the little experience I do have is with the ASDM GUI console, not the CLI console.

  Read the article

• How to troubleshoot ping request time out [closed]

  - by user28317

  I have a Windows 7 and an XP machine connected to a NETGEAR wireless router. Both machines can log into the network and surf the web. Both are connecting wirelessly. I can ping the router from each machine and get a reply. I can ping each machine from the router and get a reply. But i cannot ping each machine from the other; getting a request time out. Subnet IP Addresses are 192.168.1.* Router =1; Win7 = 10; XP = 11; Firewall is currently off in both systems. Since i can ping from router im picking that not the problem anyway. If i try to ping from xp to win7 i get Request Timed Out. If i try to ping from Win7 to Xp i get destination host unreachable. What should i do now? Thanks

  Read the article

• ftp server over internet using different port

  - by ???? ????

  I want to make my ftp server over the internet i made it on Debian linux computer and i changed the port of it to 201 my local ip is 192.168.1.3 so i can access it from any computer on my network through ftp :// mylocalip:201 it appear to me the login page i login with my linux user and can see the files on my ftp server to make it public i make port mapping on my router for port 201 when i try ftp :// mypublicip:201 it give me the login page and when i entered the login data it is loading infinity without open my ftp server files when i made it over default port 21 it works fine. can any one tell me what is the problem here?

  Read the article

• Any good phone system on a Windows Environment ?

  - by Kedare

  Hello, I am looking for a phone system that integrate well with a (almost) 100% Microsoft. I would like something that can integrate with Exchange and Active Directory (in-phone searching/calling by name (is this possible using SIP ?), etc) and if possible something not too expensive (Bye bye Cisco !), what do you recommend me ? I've heard of 3CX as IPBX and Aastra as Phones, are they good for this ? Or do you know something else good at this ? I've also seen some Alcatel IP Phones doing this (search by name, but I think that was a separated address book and not loaded from AD/Exchange) Thank you !

  Read the article

• Automatically reboot Windows8 if no internet activity

  - by GrapeCamel

  I have a media server located in a very inconvenient part of my house. Occasionally I will have to reset my router or it will reset itself. The issue is the PC loses connectivity for some reason, and I am forced to walk outside, around the house, into the basement, over a bunch of toys and weights and boxes, to push a button to reboot it. I would love to have it check itself every 5-10 minutes and auto reboot if it is unable to ping a given address/IP. Any ideas how to accomplish this?

  Read the article

• Cannot resolve a single A Record from client machine

  - by Alex

  I set up a simple Bind server on my VPS and it is working properly. The problem occurs with my local windows machines, which are connected to internet through the home router. I created an A-record named 'dev' and it is invisible from my local network for some reason, though people from other locations can resolve dev.mydomain.com. Ironically, dev.mydomain.com cannot be resolved for myself only. If I add another A-record, say, 'gamma' then it becomes visible from my local windows machines instantly. So this is just for that particular 'dev' name. The only difference is that I had dev.mydomain.com server on another IP but that was a month ago; all nameservers have been changed since then. I tried to reboot my router and flushed dns cache on windows machines: no result. Thank you in advance.

  Read the article

• How to connect 2 virtual hosts running on the same machine?

  - by Gabrielle

  I have 2 virtual hosts running on my Windows XP laptop. One is Ubuntu running inside vmware player. The other is MS virtual PC (so I can test with IE6 ). The Ubuntu virtual host is running my web application with apache. I can point my browser on my laptop at the Ubuntu IP and view my web app. I read this post http://stackoverflow.com/questions/197792/how-to-connect-to-host-machine-from-within-virtual-pc-image and was able to get my Virtual PC to ping my physical machine using the loopback adapter. But I'm stuck on getting my Virtual PC to see my web application running in the Ubuntu vmware player host. I appreciate any suggestions.

  Read the article

• Taskbar Disappears Over Remote Desktop Connection When Outside Local Network

  - by CMikeB1

  I've got a machine on my home network running Windows Server 2012 (Based on Win8) and rather than attach a monitor I remote desktop in and it works fine on my local network. The problem is, when I try to access it from outside my local network the taskbar disappears completely. When I minimize an application rather than minimize to the taskbar it simply closes the window as small as it can as if the taskbar never existed (see photos at ). I've messed with the connection properties (show/hide desktop background, etc.) with no luck. I've used the following methods to remote in and they all are fine when on the local network and taskbar-less from outside: Remote Desktop Connection on Mac Remote Desktop Connection on Windows Jump Desktop on iOS using RDP To access the computer from outside my local network I'm using a Linksys router and mapping to the server IP, port 3389. See Photos: http://i.stack.imgur.com/FyUeQ.png http://i.stack.imgur.com/9MnVr.png

  Read the article

• Automatically reboot Windows8 if no internet activity [migrated]

  - by Patrick

  I have a media server located in a very inconvenient part of my house. Occasionally I will have to reset my router or it will reset itself. The issue is the PC loses connectivity for some reason, and I am forced to walk outside, around the house, into the basement, over a bunch of toys and weights and boxes, to push a button to reboot it. I would love to have it check itself every 5-10 minutes and auto reboot if it is unable to ping a given address/IP. Any ideas how to accomplish this?

  Read the article

• Can you link to a good MySQL dumper PHP script?

  - by Ivan

  I need to migrate a website to another host. I have only FTP server access and MySQL name+pass (the MySQL server's IP I was provided is 127.0.0.1, and there's neither PhpMyAdmin nor SSHell to use). A web app run there can access the DB using credentials I know and localhost server. So I'd need a PHP script, that will correctly dump all the available databases of the MySQL server so that they can be imported on the new server. Can you recommend a good one?

  Read the article

• Remove a known network from Windows 8

  - by Edward Brey

  When Windows 8 detects a network based on the assigned IP address, netmask, default gateway, etc., it remembers the network along with the setting you give it as a public or private network. If you change the configuration of a network (e.g. reconfigure your router), Windows may determine you are on a new network and assign it a name of Network 2 or YourAPN 2. This less-than-friendly name shows up in many places in the Windows 8 UI, but unlike the good old days of Windows 7, there doesn't appear to be any UI to merge or delete these networks. What's the best way to merge or delete networks you don't want?

  Read the article

• What could be the maximum number of hosts on a 100BaseTX ethernet network ?

  - by snowflake

  Hello, I'm having two ip networks (192.168.1.x and 192.168.2.x) bridged on a server, but all hosts (fixed IPs) are on the same physical 100BaseTX ethernet (with a daisy chain of 48ports switchs). Often, I loose link between the server and hosts of the second network. Usually if I reboot the host, the connection work again, and if I force connection to be active, the connection keep alive until I ping after a while without active connection. I'm wondering how many hosts can be connected on the same network without troubles, and eventually how many switches can be daisy chained ? I suppose maximum length between hosts to be 100meters to the hub or 200meters between extremity of the network. Somebody is suggesting 8 switches here : http://www.tek-tips.com/viewthread.cfm?qid=1137879&page=12 Any comments on how to find a solution to the problem and not answering directly to the question are welcomed!

  Read the article

• DNS not responding

  - by Born2win

  I have a Dlink DIR-615 router and I have it around six mounths. My internet connection is VPN (PPTP) based i.e. I have been give a username and password from my isp and my ip address is dynamic. But from few days I am experiencing a serious problem. My router connects normally (i can see yellow light) but my computer is giving "DNS not responding" error. I have tried everything (reset,reboot etc) but no sucess. Any help would be appreciated :)

  Read the article

< Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418  | Next Page >