Search Results

Search found 26179 results on 1048 pages for 'linux from scratch'.

Page 412/1048 | < Previous Page | 408 409 410 411 412 413 414 415 416 417 418 419  | Next Page >

• How to set which IP to use for a HTTP request?

  - by GetFree

  This is probably a silly question. I'm doing some http requests using wget from the command line, and I want those connections to be made through one specific IP of the 4 IPs my server has. Those http requests go to one specific range of IPs so I only want those to be routed differently. The 4 interfaces in my server are eth0, eth0:0, eth0:1, eth0:2. I tried with the following command: route add -net 192.164.10.0/24 dev eth0:0 But when I see the routing table it says: Destination Gateway Genmask Flags MSS Window irtt Iface 192.164.10.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 The interface is set to eth0 not eth0:0 as my command says. What am I doing wrong?

  Read the article

• How to take a proccess from another session to your current.

  - by Gnutt

  I SSH'ed into my server and started a wget-download with an ampersand (&) at the end. Then my connection died. When I SSH back, the process is running (i can see it via ps aux | grep wget). Is there any way to get the output of that WGET to appear at my current session?

  Read the article

• OpenVPN + iptables / NAT routing

  - by Mikeage

  Hi, I'm trying to set up an OpenVPN VPN, which will carry some (but not all) traffic from the clients to the internet via the OpenVPN server. My OpenVPN server has a public IP on eth0, and is using tap0 to create a local network, 192.168.2.x. I have a client which connects from local IP 192.168.1.101 and gets VPN IP 192.168.2.3. On the server, I ran: iptables -A INPUT -i tap+ -j ACCEPT iptables -A FORWARD -i tap+ -j ACCEPT iptables -t nat -A POSTROUTING -s 192.168.2.0/24 -o eth0 -j MASQUERADE On the client, the default remains to route via 192.168.1.1. In order to point it to 192.168.2.1 for HTTP, I ran ip rule add fwmark 0x50 table 200 ip route add table 200 default via 192.168.2.1 iptables -t mangle -A OUTPUT -j MARK -p tcp --dport 80 --set-mark 80 Now, if I try accessing a website on the client (say, wget google.com), it just hangs there. On the server, I can see $ sudo tcpdump -n -i tap0 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on tap0, link-type EN10MB (Ethernet), capture size 96 bytes 05:39:07.928358 IP 192.168.1.101.34941 > 74.125.67.100.80: S 4254520618:4254520618(0) win 5840 <mss 1334,sackOK,timestamp 558838 0,nop,wscale 5> 05:39:10.751921 IP 192.168.1.101.34941 > 74.125.67.100.80: S 4254520618:4254520618(0) win 5840 <mss 1334,sackOK,timestamp 559588 0,nop,wscale 5> Where 74.125.67.100 is the IP it gets for google.com . Why isn't the MASQUERADE working? More precisely, I see that the source showing up as 192.168.1.101 -- shouldn't there be something to indicate that it came from the VPN? Edit: Some routes [from the client] $ ip route show table main 192.168.2.0/24 dev tap0 proto kernel scope link src 192.168.2.4 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.101 metric 2 169.254.0.0/16 dev wlan0 scope link metric 1000 default via 192.168.1.1 dev wlan0 proto static $ ip route show table 200 default via 192.168.2.1 dev tap0

  Read the article

• understanding my site's DNS records

  - by DaveM

  firstly apologies for using the word 'pointage' this is the word my french domain registrar uses so I may have used to wrong term. OK I would like to better understand what is going on on my 'pointage' record on my domain registrars site. for my (currently empty) web site it reports the following details... Type : Host : Destination A : www.mydomain.org : 62.210.176.146 A : mail.mydomain.org : 84.246.225.176 Mx : .mydomain.org : mail.mydomain.org I think I understand the MX record, that simply relays anything onto the mail.mydomain.org location. However why are the destination for the www and mail domains different. Even more confusing (for me) is the fact that if I ping either of www.mydomain.org or mail.mydomain.org the ping returns a different IP address. This IP address is consistent with that of my server (ie 92.39.247.92). So what exactly is going on ? I'm sure I could find the information on the web,I've read a few thing on the debianhelp site regarding DNS records, and it seems to suggest that the record should be a reverse lookup, but certains isn't the reverse of my servers IP ? but I don't what I should be looking for, so links to docs and search terms for google will be happily accepteed (even though they go against the grain of SO answers to question). thanks in advance. David. ps. I should add that everything seems to work just fine, and I've just descovered this part of the management page of my registrar. Edit: Addition of DNS records and ping results. The DNS record for the site. From what I've read there should only realy be a single 'A' record, so has something gone wrong ? should I change it (remove the extras and then just point www.facilitee.org - .facilitee.org and mail.facilitee.org - .facilitee.org here is the DNS record A www.facilitee.org ? 92.39.247.92 A .facilitee.org ? 92.39.247.92 A mail.facilitee.org ? 92.39.247.92 A webmail.facilitee.org ? 92.39.247.92 MX .facilitee.org ? mail.facilitee.org ping results... ~$ ping www.facilitee.org PING www.facilitee.org (92.39.247.92) 56(84) bytes of data. 64 bytes from vps4576-cloud.dns26.com (92.39.247.92): ~$ ping mail.facilitee.org PING mail.facilitee.org (92.39.247.92) 56(84) bytes of data. 64 bytes from vps4576-cloud.dns26.com (92.39.247.92): So the DNS and the ping correspond, but the 'pointage' doesn't. ~ how can I get a report of the pointage records other than from my registrar ?

  Read the article

• Tar dereference only 1 level

  - by Bart van Heukelom

  I use the following pseudo-script to create a TAR of my installed software mkdir tmp ln -s /path/to/app1/bin tmp/app1 ln -s /and/path/going/to/the-app-2 tmp/app2 tar -c --dereference -f apps.tar tmp I need the --dereference option here to follow the links I just made in tmp. The reason I make the links in the first place is to store the directories with a different name in the archive than they have on the filesystem. Until now it has worked fine. However, I now have the situation that /path/to/app1 also contains links, and those I don't want to follow. Is this possible with some changes to the tar command? Or do I need to completely switch around the way I build the archive?

  Read the article

• Determine display or VNC session based on PID

  - by Daniel Kessler

  I frequently VNC into a server where we run many concurrent computationally intensive matlab processes. Sometimes, one of my processes misbehave, which I can see from top, but I have a hard time figuring out which VNC session it's running on, or more specifically, which display it's running on. Suppose I see that PID 8536 looks like a resource hog, and I want to investigate. Because it's a matlab session, I know there is likely an IDE open somewhere, and I want to check to see if anything important is happening before I kill it. We've solved this somewhat awkwardly in the past by identifying which PTY 8536 was launched from, then looking at a process tree to figure out things launched in that context, scrolling up, and seeing the VNC initialization. Seems like there must be a better way to go PID - X Display (or VNC Session).

  Read the article

• installing software configure.in

  - by ant2009

  Hello, Fedora 12 2.6.32.9-70.fc12.i686 I have downloaded kdirstat from cvs. And I want to compile and install it. However, there is no configure script file. The only file I have is a configure.in.in. How can I create the configure script file? Many thanks for any advice,

  Read the article

• How to keep source frame rate with mencoder/ffmpeg?

  - by Sandra

  I would like to crop and rotate a video, and then encode it to mp4 or mkv. mencoder video.mp4 -vf rotate=1,crop=720:1280:0:0 -oac pcm -ovc x264 -x264encopts preset=veryslow:tune=film:crf=15:frameref=15:fast_pskip=0:threads=auto -lavfopts format=matroska -o test.mkv But when I do the above encoding, the frame rate is way too fast. The encoding options were something I found, so I don't know if that is the problem. Question All I want is to crop and rotate the video, and keep the audio/video quality as good as possible. Have anyone tried this?

  Read the article

• Intermittent apt-get 'no installation candidate' error on fabric deploy

  - by jberryman

  I'm experiencing a strange issue with a fabric script I'm using to bootstrap a server on EC2. I launch a stock Ubuntu 12.04 AMI, wait for it to start, then proceed with: with settings(host_string="ubuntu@%s" % i.dns_name, connection_attempts=30): sudo('apt-get -qy update') sudo('apt-get -qy install --no-install-recommends mdadm') # don't install postfix #etc... The apt-get update appears to run fine and gives no errors, however (2/3 of the time or so) installing mdadm throws a "no installation candidate" error. When I ssh into the server and run apt-get install mdadm I get the same error. Running apt-get update by hand, then the package installs fine. Any ideas on what might be happening, or ideas for debugging?

  Read the article

• Why is cron mailing me program output even though I've redirected to /dev/null?

  - by Server Fault

  I'm trying to restart a system process through cron and getting emailed the startup output of the process. I thought redirecting STDOUT and SDTERR to /dev/null would "silence" the output but alas, this has not work. How can I get cron to silently restart this service? crontab entry: 0 6 * * * service sympa stop &>/dev/null; service sympa start &> /dev/null sample output from restart email: Stopping Sympa bounce manager bounced ...done. * Stopping Sympa task manager task_manager ...done. * Stopping Sympa mailing list archive manager archived ...done. * Stopping Sympa mailing list manager sympa ...done. ... waiting Prototype mismatch: sub Lock::LOCK_SH () vs none at /home/sympa/bin/Lock.pm line 38. Constant subroutine LOCK_SH redefined at /home/sympa/bin/Lock.pm line 38. Prototype mismatch: sub Lock::LOCK_EX () vs none at /home/sympa/bin/Lock.pm line 39. Constant subroutine LOCK_EX redefined at /home/sympa/bin/Lock.pm line 39. Prototype mismatch: sub Lock::LOCK_NB () vs none at /home/sympa/bin/Lock.pm line 40. Constant subroutine LOCK_NB redefined at /home/sympa/bin/Lock.pm line 40.

  Read the article

• scp -q isn't quiet between different hosts

  - by pythonic metaphor

  So scp -q file host:file and scp -q host:file file are both quiet, i.e. don't give the progress meter. But when I run scp -q host1:file host2:file, I still get the progress meter as well as a Connection to host1 closed. message. The progress meter can be gotten rid of by redirected stdout to /dev/null (although I'd rather not have to), but the connection closed messages comes on stderr, which I definitely want to keep in case there's a real error. How can I make scp quiet? Do I have to run ssh host1 "scp -q file host2:file"?

  Read the article

• Multiple websites each with an SSL certificate of its own

  - by ServerDown

  Hi, We run cent os, plesk with apache and php, mysql. There are around 25 sites and each of them need an SSL certificate now. The host cannot have more than 16 IPs on the same server. Is it possible to have all these sites use just one IP address and have SSL certificate setup for each site? If yes, please let me know how I can set this up. Thanks

  Read the article

• Rails /tmp/cache/assets permissions issue using Debian virtual machine hosted on OS X Lion

  - by Jim

  I am running Parallels Desktop 7 on OS X Lion. I have a VM with Debian installed, and inside that VM I setup a Rails development environment. I am using Parallels Tools to share out my OS X home directory to the VM - the goal here is to run the Rails server on the VM, but host the files on OS X (so they are automatically backed up, and so I can use tools like Textmate to develop with). Everything seems to work with the shared directory - my Debian user can read, write, and execute files. However, when I cloned a recent Rails project from Git, I got an error message when it tried to compile the CSS assets. My symptoms are exactly the same as in the question: http://stackoverflow.com/questions/7556774/rails-sprocket-error-compiling-css-assest-chown-issue I believe this is permissions-based, but it is really weird. My entire Rails project directory has permissions set to 777 and my Debian user owns it. If I navigate into /tmp/cache/assets, those permissions are the same. However, the three-character directories Rails is creating (DCE, DA1, D05, etc...) are being created without write permissions! If I refresh the Rails page a few times, about 4 or 5 (with Rails creating new three-character directories every time), eventually it will create one of the directories with the proper 777 permissions and everything will work! This will persist until I make a change to the CSS files and it has to recompile. Does anyone have any idea what might be going on here? I can't fathom why it is creating temp directories with incorrect permissions, or why after a few refreshes the good permissions kick in and it works... It definitely seems to be an issue with the share, since if I move the project into a different directory on the VM, it seems to work fine. On the OS X side, I've given the shared folder 777 permissions as well, but no dice...any ideas? Update I've found that the number of times I need to refresh before it works is not random - it has to do with how many assets are being compiled. For example, if I edit one of my CSS files, and there are four CSS files in the app/assets/stylesheets directory, I have to refresh four times before the app will finally work without the operation not permitted error...

  Read the article

• GitLab on a fresh Ubuntu 13 EC2 instance

  - by Polly

  I've spun up a fresh Amazon EC2 instance for a micro Ubuntu 13 server to be used as a GitLab server. I know the specs are a little low, but it should serve well for my purposes. It has an elastic (static) IP address that I have created an A record for git.mydomain.com. The first thing I did to the instance was add 1GB of swap to keep it happy from a memory perspective. I then set the hostname of the box to be git.mydomain.com and followed https://github.com/gitlabhq/gitlabhq/blob/6-2-stable/doc/install/installation.md to the letter. Everything seems to have worked, except for the web server side of things. Doing a gitlab:check shows the following: Checking Environment ... Git configured for git user? ... yes Has python2? ... yes python2 is supported version? ... yes Checking Environment ... Finished Checking GitLab Shell ... GitLab Shell version >= 1.7.4 ? ... OK (1.7.4) Repo base directory exists? ... yes Repo base directory is a symlink? ... no Repo base owned by git:git? ... yes Repo base access is drwxrws---? ... yes update hook up-to-date? ... yes update hooks in repos are links: ... can't check, you have no projects Running /home/git/gitlab-shell/bin/check Check GitLab API access: /usr/local/lib/ruby/2.0.0/net/http.rb:878:in `initialize': Connection refused - connect(2) (Errno::ECONNREFUSED) from /usr/local/lib/ruby/2.0.0/net/http.rb:878:in `open' from /usr/local/lib/ruby/2.0.0/net/http.rb:878:in `block in connect' from /usr/local/lib/ruby/2.0.0/timeout.rb:52:in `timeout' from /usr/local/lib/ruby/2.0.0/net/http.rb:877:in `connect' from /usr/local/lib/ruby/2.0.0/net/http.rb:862:in `do_start' from /usr/local/lib/ruby/2.0.0/net/http.rb:851:in `start' from /home/git/gitlab-shell/lib/gitlab_net.rb:62:in `get' from /home/git/gitlab-shell/lib/gitlab_net.rb:29:in `check' from /home/git/gitlab-shell/bin/check:11:in `<main>' gitlab-shell self-check failed Try fixing it: Make sure GitLab is running; Check the gitlab-shell configuration file: sudo -u git -H editor /home/git/gitlab-shell/config.yml Please fix the error above and rerun the checks. Checking GitLab Shell ... Finished Checking Sidekiq ... Running? ... yes Number of Sidekiq processes ... 1 Checking Sidekiq ... Finished Checking GitLab ... Database config exists? ... yes Database is SQLite ... no All migrations up? ... yes GitLab config exists? ... yes GitLab config outdated? ... no Log directory writable? ... yes Tmp directory writable? ... yes Init script exists? ... yes Init script up-to-date? ... yes projects have namespace: ... can't check, you have no projects Projects have satellites? ... can't check, you have no projects Redis version >= 2.0.0? ... yes Your git bin path is "/usr/bin/git" Git version >= 1.7.10 ? ... yes (1.8.3) Checking GitLab ... Finished It seems like I'm very nearly there. Searching on this error I have only found advice that unfortunately hasn't helped. I'm not using any kind of SSL setup, which a lot of the posts I found were about. I have tried appending 127.0.0.1 git.mydomain.com to /etc/hosts and giving the instance a reboot but there was no change. My config/gitlab.yml file has host: git.mydomain.com in it, and my gitlab-shell/config.yml has gitlab_url: "http://git.mydomain.com/" in it. I'm sure I'm missing something simple, but I've been through every relevant link I can find and have had no positive results; thank you in advance for any help!

  Read the article

• What can impact the throughput rate at tcp or Os level?

  - by Jimm

  I am facing a problem, where running the same application on different servers, yields unexpected performance results. For example, running the application on a particular faster server (faster cpu, more memory), with no load, yields slower performance than running on a less powerful server on the same network. I am suspecting that either OS or TCP is causing the slowness on the faster server. I cannot use IPerf , unless i modify it, because the "performance" in my application is defined as Component A sends a message to Component B. Component B sends an ACK to component A and ONLY then Component A would send the next message. So it is different from what IPerf does, which to my knowledge, simply tries to push as many messages as possible. Is there a tool that can look at OS and TCP configuration and suggest the cause of slowness?

  Read the article

• Cannot increase MTU on gigabit network

  - by RayQuang

  Hi, I have just set up my new gigabit network and when I was about to increase the MTU to use jumbo frames, I get this error: root@rayquang-desktop:~# ifconfig eth1 mtu 9000 SIOCSIFMTU: Invalid argument Could anyone help me to increase the MTU. Details: NIC: NETGEAR GA311; Switch: NETGEAR GS105, running Ubuntu 10.10 and Debian Lenny on desktop, server respectively. Help would be greatly appreciated, RayQuang

  Read the article

• How do I enable a stick pointing device in Ubuntu?

  - by SjB

  How do I enable/disable a stick pointing device in Ubuntu (9.10)? How can I configure clicking and scrolling with the stick pointer? (I can't click with the stick and scroll the page.)

  Read the article

• mount qcow2 snapshots

  - by phhe

  I'm running some Xen-servers and started migrating to KVM. Currently my guests are either running on raw-images or LVMs. I found libvirt providing some very nice snapshot features (virsh snapshot-create, ...) so I decided to use qcow2 instead of raw/lvm. And here is my question: libvirt creates the same sort of snapshots on the qcow2 image as if I use qemu-img - is it possible to mount them ? I read something about qemu-nbd and the possibility of mounting qcow but I could not find a word about snapshots.

  Read the article

• How to record desktop session with sound on Moblin?

  - by Moblin Newbie

  I have tried to record my desktop session with sound on a netbook running Moblin, but I can't seem to be able to record sound. xvidcap just says error accessing /dev/dsp. Are there some options I should pass to xvidcap? Should I use some other recording application? Update: I am using the latest xvidcap (1.1.7) and have read the FAQ. Unfortunately Moblin' gnome-volume-control looks nothing like what is linked to from the xvidcap FAQ; there is no way to to set or even look at the details the screenshot shows, as far as I know. alsamixer shows pulseaudio is used, if that gives anyone any clues. The device is Acer Aspire One.

  Read the article

• How do I run vino-server without a monitor attached in Ubuntu 10.04

  - by Ole

  I just upgraded to Ubuntu 10.04 yesterday on a headless home server. I use the server for a variety of purposes, and what I don't know how to do via SSH I've alway been able to do through VNC. However, since the upgrade vino-server will no longer run if there isn't a monitor attached. Before it used to start up without a problem. Even by attempting to run the server via SSH gives me a "could not load display" error. Summary: I need to get vino-server running at boot time on a server with Ubuntu 10.04, without a monitor attached.

  Read the article

• Using AWStats, cannot get MaxNbOfExtraX to limit rows in Extra Report

  - by user137519

  Folks, got something really odd here I'd like to resolve. I've been using Awstats and have a couple of extra reports. I cannot get any of them to limit the rows using MaxNbOfExtraX to work. Here are two examples: ExtraSectionName1="Top 100 Searches" ExtraSectionCodeFilter1="200 304" ExtraSectionCondition1="URL,/search/search_post.php" ExtraSectionFirstColumnTitle1="Search Parameters" ExtraSectionFirstColumnValues1="QUERY_STRING,(.*)" ExtraSectionFirstColumnFormat1="QueryParameters: %s" ExtraSectionStatTypes1=HL ExtraSectionAddAverageRow1=0 ExtraSectionAddSumRow1=1 MaxNbOfExtra1=100 MinHitExtra1=4 ExtraSectionName2="Top 100 Downloads" ExtraSectionCodeFilter2="200 304" ExtraSectionCondition2="URL,/filedownload.php" ExtraSectionFirstColumnTitle2="File Downloads" ExtraSectionFirstColumnValues2="QUERY_STRING,(.[0-9]{5})(h|p)?." ExtraSectionFirstColumnFormat2="File ID: %s" ExtraSectionStatTypes2=HL ExtraSectionAddAverageRow2=0 ExtraSectionAddSumRow2=1 MaxNbOfExtra2=100 MinHitExtra2=3 According to all documentation I've read the MaxNbOfExtra1 should keep the limit to 100. However when I run this, with the debug messages enabled I get a message indicated that the query will be in excess of of 500 and would not run it. I increased the number of ExtraTrackedRowsLimit to 2000 and it would work. But the option I provided should have lowered that. I even tried without the ExtraTrackedRowsLimit with MaxNbOfExtra1=100 but same error: No limit to 100 and the "excess of 500" error. I have the URLWithQuery=1 and my reports do run properly along with my regex filters. I am using MinHitExtra1 to limit the rows and that works, but why can I not get the MaxObOfExtraX option to work. Any ideas? Thanks in advance.

  Read the article

• Why doesn't NFS recognize a new UID?

  - by user76177

  I have two servers running RHEL6. I have root access to both. The main server, which I will refer to as server, is a database server. The application server, which I will refer to as client, mounts a directory from server via NFS. There is a user, appuser, on both client and server. However, appuser's UID on client is 502. appuser's UID on server is 506. Both users need read and write capability on the NFS share. To facilitate this, I made the share owned by appuser on server. Running id appuser on each yields: uid=506(appuser). Of course, client does not recognize that ownership, since appuser has a different id on client. So I did the following: Changed UID of user in /etc/passwd on client to be 506. Changed ownership of appuser's $HOME on client to be appuser again so that I could log in. Now, when I go to look at the NFS share from the client side, I see that it is owned by 502. 502 is the OLD id for appuser on client. I can't change ownership of the NFS share from client, since that is a volume that physically resides on server. I need to make sure that the NFS share shows ownership of appuser from both server and client. What step have I missed since changing the appuser id on client? NOTE: I have not rebooted client (or anything else.)

  Read the article

• NIC is receiving, but not transmitting at all?

  - by Shtééf

  I'm trying to fix a very strange problem remotely on a machine at a customer site. The machine is a Dell PowerEdge, I believe a 1950 (haven't verified, but the lspci output matches specs I found.) The machine has two similar NICs, identified as Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12) by lspci, and using the bnx2 driver. (I suspect these are on-board and on the same controller, which is what I'm accustomed to for this type of machine.) The primary interface eth0 works perfectly, and is in fact how I am ssh'd in. However, the secondary interface eth1 is not transmitting. I can see this in ifconfig output, for example, where the TX field is always 0. However, it is receiving, and tcpdump shows ARP requests coming from the ISP's gateway on the other side. The interface is physically connected to a Siemens BSTU4 modem, configured by the ISP. The link is properly set to 10MBps and full duplex, without negotation, as the ISP requested. A small /30 subnet is configured. For the sake of anonimity, let's say the machine is 3.3.3.2/30, and the ISP's gateway .1. The machine has no firewall settings whatsoever. Even running something like arping -I eth1 3.3.3.1, and running tcpdump alongside, shows no traffic whatsoever being transmitted on the interface. (But the other side keeps steadily sending ARP requests, and that is all that can be seen.) What could be causing this? Here's some output, anonymized, which may hopefully help: $ ethtool eth1 Settings for eth1: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: Not reported Advertised auto-negotiation: No Speed: 10Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: off Supports Wake-on: d Wake-on: d Link detected: yes $ ip link show eth1 3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:15:c5:xx:xx:xx brd ff:ff:ff:ff:ff:ff $ ip -4 addr show eth1 3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 inet 3.3.3.2/30 brd 3.3.3.3 scope global eth1 $ ip -4 route show match 3.3.3.0/30 3.3.3.0/30 dev eth1 proto kernel scope link src 3.3.3.2 default via 10.0.0.5 dev eth0

  Read the article

• Subversion error: Repository moved permanently to please relocate

  - by Bart S.

  I've set up subversion and apache on my server. If I browse to it through my webbrowser it works fine (http://svn.host.com/reposname). However, if I do a checkout on my machine I get the following error: Command: Checkout from http://svn.host.com/reposname, revision HEAD, Fully recursive, Externals included Error: Repository moved permanently to 'http://svn.host.com/reposname/'; please relocate I checked apache's error log, but it doesn't say anything. (it does now - see edit) My repositories are stored under: /var/www/svn/repos/ My website is stored under: /var/www/vhosts/x/... Here's the conf file for the subdomain: <Location /> DAV svn SVNParentPath /var/www/svn/repos/ AuthType Basic AuthName "Authorization Realm" AuthUserFile /var/www/svn/auth/svn.htpasswd Require valid-user </Location> Authentication works fine. Does anyone know what might be causing this? -- Edit So I restarted apache (again) and tried it again and now it give me an error message, but it doesn't really help. Anyone have an idea what it means? [Wed Mar 31 23:41:55 2010] [error] [client my.ip.he.re] Could not fetch resource information. [403, #0] [Wed Mar 31 23:41:55 2010] [error] [client my.ip.he.re] (2)No such file or directory: The URI does not contain the name of a repository. [403, #190001] -- Edit 2 If I do svn info it doesn't give anything usefull: [root@eduro eduro.nl]# svn info http://svn.domain.com/repos/ Username: username Password for 'username': svn: Repository moved permanently to 'http://svn.domain.com/repos/'; please relocate I also tried doing a local checkout (svn checkout file:///var/www/svn/repos/reposname) and that works fine (also adding / commiting works fine). So it seems is has something to do with apache. Some other information: I'm running CentOs 5.3 Plesk 9.3 Subversion, version 1.6.9 (r901367) -- Edit 3 I tried moving the repositories, but it didn't make any difference. selinux is disabled so that isn't it either. -- Edit 4 Really? Nobody :(?

  Read the article

• Route eth0 to internet traffic and eth1 to local traffic

  - by Romain Caire

  How can I route all my internet traffic on eth0 (everything except 192.168.1.0/24) and route my local traffic through eth1 (192.168.1.0)? Here is my attempt : # Flush ALL THE THINGS. ip route flush table main # Restore the main table. I flushed it because OpenVPN does weird things to it. ip route add 127.0.0.0/8 via 127.0.0.1 dev lo ip route add 0.0.0.0/0 via 164.67.195.1 ip route add 192.168.1.0/24 via 192.168.1.1 ip route flush cache

  Read the article

< Previous Page | 408 409 410 411 412 413 414 415 416 417 418 419  | Next Page >