Search Results

Search found 20905 results on 837 pages for 'universal image loader'.

Page 412/837 | < Previous Page | 408 409 410 411 412 413 414 415 416 417 418 419  | Next Page >

  • Cloned screen on monitors with different resolutions

    - by jrtokarz
    I want to set up a system with two displays connected. One display will be a 22inch monitor with a native resolution of 1920x1080. The other display is a 19inch display native resolution 1024x768. I want to clone the 1920x1080 display on to the 1024x768 display. I have tried this and the 1080p image is squashed on to the smaller display. Is it possible to set it up such that rather than squashing the image, I can get the smaller display to use a virtual resolution of 1920x1080 and pan the display?

    Read the article

  • Unable to burn Windows ISO from Fedora

    - by user331947
    First of all, English is not my native tongue, so apologies for any mistakes. My computer recently started prompting that it can't launch Windows successfully. So I just choose start Windows normally. Then, I found that the startup freezes at the Windows screen (before the login prompt). I have tried rebooting several times and get the same results. So I just gave up. After few days, I tried to boot up my laptop again. This time it got to the desktop, but it's extremely slow and the icons on my Desktop don't show up. I decided to format the Windows partition and reinstall a new one. (It is usually faster that way since I kept my 400GB+ data on aother partition and programs and the rest in the same partition as Windows). The thing is I get the Windows disc at the moment (Traveling aboard). But I have a Windows 7 disc image on my hard disk. So, I downloaded Ubuntu 14.04 LTS, made a Live USB, and then try to burn the image from Ubuntu. But the program just freezes and I don't know why. I tried several times and it's still the same. So I tried using Fedora instead, just to see if it will work. The Disk Image Writer report something like this. Error unmounting /dev/dm-0: Command-line `umount "/dev/dm-0"' exited with non-zero exit status 32: umount: /: target is busy (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1).) (udisks-error-quark, 14) Also, I tried installing linux on the windows partition. The installation program freezes (both Ubuntu and Fedora). So, I thought that maybe something are wrong with my hard disk. I seek the solution on the internet and found that gparted can be used to format a partition. And it also froze at "Searching /dev/sda/ partition ...". I'm using Lenovo Y570. Spec below. http://www.notebookreview.com/notebookreview/lenovo-ideapad-y570-review-a-lenovo-bestseller/3/ Can anyone suggest a next step in diagnosing and fixing this problem? Thanks in advance.

    Read the article

  • Skype sounds sizzle/distorted/bad

    - by Filubuntu
    I have the same problem as described in the questions skype notification sounds sizzled and bad sound on login to skype. But it is not only the login, notification, but also when talking to somebody. I tried the solution to remove/re-install skype and most of the solutions in this questions, e.g. checking mixer, sound settings and installing alsa-hda-dkms (incl. system restart). After installing skype (and even after upgrade to skype 4.0) in Ubuntu 12.04 (AMD 64) there was no sound at all. I followed the first step of the SoundTroubleshootingProcedure and at least there is now sound: sudo add-apt-repository ppa:ubuntu-audio-dev/ppa; sudo apt-get update;sudo apt-get dist-upgrade; sudo apt-get install linux-sound-base alsa-base alsa-utils gdm ubuntu-desktop linux-image-`uname -r` libasound2; sudo apt-get -y --reinstall install linux-sound-base alsa-base alsa-utils gdm ubuntu-desktop linux-image-`uname -r` libasound2; killall pulseaudio; rm -r ~/.pulse*; sudo usermod -aG `cat /etc/group | grep -e '^pulse:' -e '^audio:' -e '^pulse-access:' -e '^pulse-rt:' -e '^video:' | awk -F: '{print $1}' | tr '\n' ',' | sed 's:,$::g'` `whoami` The jittering sound would sometimes disappear, e.g. on the Echo-Testcall after replaying the recorded part. And I noticed that if I let music play in the rhythmbox and then start skype, the sound is fine. So I have a weak solution, but I would be glad it would work without this detour. As requested: My sound card is a an "AMD High Definition Audio Device" called Advanced Micro Devices (AMD) Hudson Azalia controller (rev01), subsystem Lenovo Device 21ea (according to sysinfo) on a Lenovo Thinkpad Edge 525.

    Read the article

  • CodePlex Daily Summary for Thursday, November 15, 2012

    CodePlex Daily Summary for Thursday, November 15, 2012Popular ReleasesMVC Bootstrap: MVC Boostrap 0.5.6: A small demo site, based on the default ASP.NET MVC 3 project template, showing off some of the features of MVC Bootstrap. Added features to the Membership provider, a "lock out" feature to help fight brute force hacking of accounts. After a set number of log in attempts, the account is locked for a set time. If you download and use this project, please give some feedback, good or bad!Home Access Plus+: v8.4: This release only contains fixes for the 97576 release, you can download the v8.3 release files which aren't in this release from 97576 Changes: Fixed: Setup.aspx wrong jquery reference Fixed: Issue with loading the user's photo Changed: The JSON Urls to use a number of a date rather than a string Added: Code to hopefully, finally, fix the AD Browser not working some times File Changes: ~/bin/hap.ad.dll ~/bin/hap.web.dll ~/bin/hap.web.configuration.dll ~/bin/hap.web.livetiles.dl...OnTopReplica: Release 3.4: Update to the 3 version with major fixes and improvements. Compatible with Windows 8. Now runs (and requires) .NET Framework v.4.0. Added relative mode for region selection (allows the user to select regions as margins from the borders of the thumbnail, useful for windows which have a variable size but fixed size controls, like video players). Improved window seeking when restoring cloned thumbnail or cloning a window by title or by class. Improved settings persistence. Improved co...DotSpatial: DotSpatial 1.4: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Tutorials are available. Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components ...JSLint for Resharper: 0.2.4701 (Resharper 7.1): Added settings dialog. May now prioritize before Resharper JS messages JSLint settings may be set as default. (For example browser: true, indent: 2) Added support for JSLint directives in mixed language files. Upgraded to Resharper 7.1.WinRT XAML Toolkit: WinRT XAML Toolkit - 1.3.5: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features Attachable Behaviors AwaitableUI extensions Controls Converters Debugging helpers Extension methods Imaging helpers IO helpers VisualTree helpers Samples Recent changes Docum...Social Network Importer for NodeXL: SocialNetImporter(v.1.6.1): This new version includes: - Fixes for some reported bugs. To use the new graph data provider, do the following: Unzip the Zip file into the "PlugIns" folder that can be found in the NodeXL installation folder (i.e "C:\Program Files\Social Media Research Foundation\NodeXL Excel Template\PlugIns") Open NodeXL template and you can access the new importer from the "Import" menuAcDown?????: AcDown????? v4.3: ??●AcDown??????????、??、??、???????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown??????????????????,????????????????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???,????????.NET Framework 2.0???(x86),?????"?????????"??? (2)???????????Linux???,????????Mono?? ??2...SoftRenderer: SoftRenderer v0.2: SPONZA DEMO SoftRender is a CPU based renderer. It render 3D scene only on CPU. It's a project for learning purpose. SoftRender ????????,??????????。 http://i3.codeplex.com/Download?ProjectName=sr&DownloadId=528732 ?????????????,???compilehwshader.bat???????shader SoftRenderer.exe?vc10???????bin?? SoftRenderer_avx.exe?intel????????avx???cpu?????bin??WallSwitch: WallSwitch 1.2.1: Version 1.2.1 Changes: Improved collage image distribution to overlap older images first. Set default collage background blur distance to 4 (provides a more gradual effect). Fixed issue where wallpaper not displayed on Windows Vista when Cross-Fade transitions enabled. Fixed issue with duplicated themes not updating history view correctly.????: ???? 1.0: ????Unicode IVS Add-in for Microsoft Office: Unicode IVS Add-in for Microsoft Office: Unicode IVS Add-in for Microsoft Office ??? ?????、Unicode IVS?????????????????Unicode IVS???????????????。??、??????????????、?????????????????????????????。Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.74: fix for issue #18836 - sometimes throws null-reference errors in ActivationObject.AnalyzeScope method. add back the Context object's 8-parameter constructor, since someone has code that's using it. throw a low-pri warning if an expression statement is == or ===; warn that the developer may have meant an assignment (=). if window.XXXX or window"XXXX" is encountered, add XXXX (as long as it's a valid JavaScript identifier) to the known globals so subsequent references to XXXX won't throw ...???????: Monitor 2012-11-11: This is the first releasehttpclient?????????: httpclient??????? 1.0: httpclient??????? (1)?????????? (2)????????? (3)??2012-11-06??,???????。VidCoder: 1.4.5 Beta: Removed the old Advanced user interface and moved x264 preset/profile/tune there instead. The functionality is still available through editing the options string. Added ability to specify the H.264 level. Added ability to choose VidCoder's interface language. If you are interested in translating, we can get VidCoder in your language! Updated WPF text rendering to use the better Display mode. Updated HandBrake core to SVN 5045. Removed logic that forced the .m4v extension in certain ...ImageGlass: Version 1.5: http://i1214.photobucket.com/albums/cc483/phapsuxeko/ImageGlass/1.png v1.5.4401.3015 Thumbnail bar: Increase loading speed Thumbnail image with ratio Support personal customization: mouse up, mouse down, mouse hover, selected item... Scroll to show all items Image viewer Zoom by scroll, or selected rectangle Speed up loading Zoom to cursor point New background design and customization and others... v1.5.4430.483 Thumbnail bar: Auto move scroll bar to selected image Show / Hi...Building Windows 8 Apps with C# and XAML: Full Source Chapters 1 - 10 for Windows 8 Fix 002: This is the full source from all chapters of the book, compiled and tested on Windows 8 RTM. Includes: A fix for the Netflix example from Chapter 6 that was missing a service reference A fix for the ImageHelper issue (images were not being saved) - this was due to the buffer being inadequate and required streaming the writeable bitmap to a buffer first before encoding and savingmyCollections: Version 2.3.2.0: New in this version : Added TheGamesDB.net API for Games and NDS Added Support for Windows Media Center Added Support for myMovies Added Support for XBMC Added Support for Dune HD Added Support for Mede8er Added Support for WD HDTV Added Fast search options Added order by Artist/Album for music You can now create covers and background for games You can now update your ID3 tag with the info of myCollections Fixed several provider Performance improvement New Splash ...Draw: Draw 1.0: Drawing PadNew ProjectsCreatorRSS: CreatorRSS - A Simple Desktop tray RSS Reader This is a simple desktop RSS reader that will help in managing your feeds and get notifications. CreatorRSS is based on .NET framework 2.0 and is coded in C#. This was tested only on Windows Xp Professional Sp2 but it should work on any Windows operating systems that support .NET framework. Extensions Library: Extension Library adds several helpful extensions to your project including: - SharePoint Logging - Event Viewer Logging - Exception Handling - .Net ExtensionsHoliday Calendar: This project contains a holiday calendar user control to be used in Windows Form applications.InputSQL: C# InputSQLInstall Visual Basic 6 in Windows 8: Please see the home page.KaartenSolution: A very simple card game.MezanmiNet_TaxiReviews: just a review application on the mobile platformMSHelpMeHD: A Windows 8 Store App.ProjectSocial: This is just a project to try coding.Rabbit MQ Client for Windows Store apps: rabbitmq client support for windows apps storeRFC 822 DateTime: Parse or write a date and time formatted according to the RFC 822 specification. RxJS TypeScript difinition: TypeScript d.ts files for RxJS(ReactiveExtensions for JavaScript)Samurai Blades - Webapp: A mimic of a classic board game (Shogun) created for web using HTML5 and ASP.NET MVC 4 (including the new typescript js compiler). servicehook: testSIMS Bulk Import: SIMS .net is the most popular MIS system used by schools across the UK. This tool allows you to bulk import email addresses and information into UDF fields.SpaceFlight: This project is a browser for the SloanDigital Sky Survey Data sets that allows for unconstrained movement within the data set.Sparse matrix format converter: Convert matrix market files to CSR0, CSR1 format. SPAutoSuggestion: A JavaScript application to show auto-suggestions in SharePoint search site's text boxes like in Google.SpreadsheetLight by Vincent Tan: For the latest release of SpreadsheetLight always go to http://www.spreadsheetlight.com, Anele MbangaSSTU: SSTU - this is simple client for Russian "Saratov State Technical University" web-site.Username generator library: Helps generate usernamesVideoStream: First attempt at a Windows Store Style App, aims to make it easy to browse videos from links provided in social media streams.WP8 Async WebClient: Provides async/await (TPL) capability to WebClient within Windows Phone 8wsccprototype: this is a prototype of what the main website will look like. Every other customization will be made in time.wsubi: A spiced-up way to manage scripts. This is a Windows port of the the 'sub' project from 37signals (https://github.com/37signals/sub).??C#????????: ?????????????ROYcms?????????! 1.?????????,?????? 2.????????,?????????? 3.?????,?????,????????????????,??????????? 4.???????????,????

    Read the article

  • Unable to print login-required images in IE

    - by Tim Fountain
    I have some images in a section of a site that require the user to be logged in in order to view. These images are served by a PHP script, which checks the user's login state and if valid, serves the binary data with the appropriate headers. This all works fine. The issue comes when a user tries to print one of these images. In Internet Explorer, when they go to print preview they get the broken image box with a red cross in the corner instead of the actual file. This is what gets printed also. All other browsers can print the images without issue. I have some images elsewhere on the site that are also served via. PHP but these don't require a login. These print fine. The PHP-powered HTML pages on the site that require a login also print fine in IE. It's just login-required images. The user hitting print preview does not seem to result in additional HTTP request to the server for the file. However I do see an additional HTTP request a few seconds later that comes from the same IP (may or may not be related), This request includes no host header, no REQUEST_URI and no user agent. The 'please login' page sends an appropriate 403 header. I've also added a far-in-future expires header to the image response itself to ensure that browsers can serve/print the files from their own cache but this hasn't made any difference. Why can't IE print the images and what else can I do to investigate or fix the problem?

    Read the article

  • Logitech M185 Wirless Mouse issue

    - by Elliot Harrison
    An issue with a Logitech M185 mouse today. A user is unable to use the device. The device works perfectly fine on my PC (It appears as HID-compliant mouse), but not on her laptop. It does not appear in her device manager on the 'Mice and other pointing devices' section. I did notice an unknown device in the Universal Serial Bus Controllers section, but when I try to update the driver, it says it has the most up to date driver. We've tried plugging in the dongle in multiple USB slots but no luck. Any advice? It's a HP 620 Laptop on Windows 7. Thank you :)

    Read the article

  • Server 2008 R2 - Cannot add HP UPD PCL 6 - Failed with error 0x000000002

    - by Rasmus
    I am having a problem with adding a print driver to one of our 2008 R2 RDS servers. On all other RDS servers in the farm there is no problem. The print server is 2008 R2. The HP Universal Print Driver PCL 6 is installed on the print server. When trying to add a printer with the driver on the failing RDS server i just get the error "Cannnot connect to the printer. Failed with errorcode 0x00000002" I have tried to add the driver to the RDS server localy but it fails with the same error. The driver has been installed before and is currently visible in the printmanagement.msc. When trying to remove the print driver i am unable to do it because it's "Currently in use" What to do? Have tried everyting - i think :-) Thanks. /Rasmus

    Read the article

  • Ubuntu stops using Nvidia driver after kernel upgrade

    - by Daniel
    Just updated and restarted, Ubuntu's doesn't display correctly. After restart, the desktop now looks like this. I've temporarily switched to the Nouveau driver. The update history reveals the kernel was updated, amongst many things; and the following were installed: linux-image-3.5.0-19-generic (3.5.0-19.30) linux-image-extra-3.5.0-19-generic (3.5.0-19.30) I've encountered this type of problem quite recently, so I decided to reapply the same steps, to solve the problem, as follows: sudo apt-get install linux-headers-3.5.0-19 sudo apt-get install linux-headers-3.5.0-19-generic sudo depmod -a sudo modprobe nvidia sudo /etc/init.d/*dm restart When installing linux-headers-3.5.0-19-generic, I get an error, message from terminal as follows: Setting up linux-headers-3.5.0-19-generic (3.5.0-19.30) ... Examining /etc/kernel/header_postinst.d. run-parts: executing /etc/kernel/header_postinst.d/dkms 3.5.0-19-generic /boot/vmlinuz-3.5.0-19-generic Error! Problems with depmod detected. Automatically uninstalling this module. DKMS: Install Failed (depmod problems). Module rolled back to built state. However, I ignored the above error and continued the steps with sudo depmod -a, installed nvidia-current, then did sudo modprobe nvidia, which yielded the following error: FATAL: Error inserting nvidia_current (/lib/modules/3.5.0-19-generic/updates/dkms/nvidia_current.ko): No such device Upon restart, the Nvidia driver now works! BTW, do those error messages imply I broke something? Just curious, cause I don't want to get happy I've fixed it, then it stops working later on. The system is Dell XPS-L702X, with NVIDIA GeForce GT 555M, and 17" screen.

    Read the article

  • Slick 2d scrolling off screen

    - by Peter
    I have something scrolling in and out of the screen. Now when it goes off screen, I want it to scroll into the screen at another location. What I do is I grab the last pixels at the screens edge using g.copyArea and then g.drawImage on the edge of the screen. And then I do a g.translate to create room for the next row which is next render cycle. My problem is that I get a single pixel row, which is not copied onto the canvas. Where as I want each row to be added and then translated, so that the image that scrolled off screen is recreated on the other side of the screen. Here is my code, maybe there is a better way of doing this, open to any suggests, cause I'm totally stuck @Override public void render(GameContainer gc, Graphics g) throws SlickException { //g.setClip(0, 0, 300, gc.getHeight()); g.translate(0, y); g.drawImage(image,0,200); g.resetTransform(); //g.clearClip(); g.copyArea(rightImage, 0, gc.getHeight() - 1); g.drawImage(rightImage, 300, 0); g.translate(0, y); y=y+3; }

    Read the article

  • Converting 3 dimension byte array to a single byte array [on hold]

    - by Andrew Simpson
    I have a 3 dimensional byte array. The 3-d array represents a jpeg image. Each channel/array represents part of the RGB spectrum. I am not interested in retaining black pixels. A black pixel is represented by this atypical arrangement: myarray[0,0,0] =0; myarray[0,0,1] =0; myarray[0,0,2] =0; So, I have flattened this 3d array out to a 1d array by doing this byte[] AFlatArray = new byte[width x height x 3] and then assigning values respective to the coordinate. But like I said I do not want black pixels. So this array has to only contain color pixels with the x,y coordinate. The result I want is to re-represent the image from the i dimension byte array that only contains non-black pixels. How do I do that? It looks like I have to store black pixels as well because of the xy coordinate system. I have tried writing to a binary file but the size of that file is greater than the jpeg file as the jpeg file is compressed. I am using c#.

    Read the article

  • Which network performance management software do you use?

    - by Jamie Keeling
    Hello, I am looking at the various options available for network performance management software, some of the solutions I've found so far are: Proprietary: HP - ProCurve Universal: SolarWinds - Orion Open Source: OpenNMS I am trying to discover the benefits of each package over the other and reasons as to why you would go for one (Such as size of the network, overall cost etc..). I'm curious as to which ones other people use and why? Each customer has their own needs and requirements and it would be great to hear some of yours. Thank you for your time.

    Read the article

  • How to code Time Stop or Bullet Time in a game?

    - by David Miler
    I am developing a single-player RPG platformer in XNA 4.0. I would like to add an ability that would make the time "stop" or slow down, and have only the player character move at the original speed(similar to the Time Stop spell from the Baldur's Gate series). I am not looking for an exact implementation, rather some general ideas and design-patterns. EDIT: Thanks all for the great input. I have come up with the following solution public void Update(GameTime gameTime) { GameTime newGameTime = new GameTime(gameTime.TotalGameTime, new TimeSpan(gameTime.ElapsedGameTime.Ticks / DESIRED_TIME_MODIFIER)); gameTime = newGameTime; or something along these lines. This way I can set a different time for the player component and different for the rest. It certainly is not universal enough to work for a game where warping time like this would be a central element, but I hope it should work for this case. I kinda dislike the fact that it litters the main Update loop, but it certainly is the easiest way to implement it. I guess that is essentialy the same as tesselode suggested, so I'm going to give him the green tick :)

    Read the article

  • First Experience with Web Services

    When I first started programming with Microsoft .Net (1.0 Framework) I had a strong desire to learn how search engines indexed web sites. At that time I was a working as a search engine spammer creating web pages to generate traffic for specific themes for various clients. One way I attempted to better understand .Net was to build a web spider that analyzed web pages on demand. An example of the spider is hosted at AddLinkz.com. After my spider was built I had no real idea what I could/should do with it until I found the MSN Search API. I used this web service to compare its results with my spider. Additionally, I used the API to feed my .Net web spider new URLs from the API based on specific search terms. MSN’s search API was very easy to use, I just had to request information by calling a web URL with parameters via a Get request and the results were returned in XML. At that time all requests were limited to XML responses and a maximum of 1,000 results per query.   Since then the entire API has gone through several reconstructions, rebranding and new search services.  Microsoft’s new Bing API replaced the older MSN search API and added several new search capabilities. These new features allow search data to be returned for web searches, image searches, new searches, and related search terms to name a few. Bing API Version 2.0 SourceTypes Web Searches for web content Sushi Image Searches for images on the web Sushi News Searches news stories Sushi InstantAnswer Searches Encarta online what is sushi, convert 5 feet to meters, x*5=7, and 2 plus 2 Spell Searches Encarta dictionary for spelling suggestions Phonebook Searches phonebook entries sushi in Los Angeles RelatedSearch Returns the query strings most similar to yours Ad Returns advertisements to incorporate with results I currently plan to start using the web search feature from the new Bing 2.0 API in an open source project related to exception management. Currently, it is still in the conception phase.

    Read the article

  • Using 12.04 installation as a persistent pen drive

    - by Cawas
    Disclaimer: I aim to build a self contained pen drive with my application inside, so no matter about updates. Maybe I'm looking at the wrong linux distribution to do this... Please let me know if you think so. I've tried knoppix and even lubuntu, but they don't come with enough "drivers" for Unity3D to work. Creating a custom live persistent pen drive is a real pain and I'm trying for 1 day without any success. Sure, being able to do it would probably be ideal and occupy the minimum space. Using the installation image on a pen drive, however, is good enough and is really easy to create. We can even do it from any OS, using UNetBootin, LiLi USB Creator or some other methods. Straight forward. Some recommend installing it on a pen drive. But that requires a lot of space and, I believe, it won't behave as good as something meant to be installed on a usb disk, because of memory management. So, there are only a few negative points on using the installation image that I can think of. Question here, is how to remove those drawbacks: Having to press "Try Ubuntu". That's the big one. Couldn't find how. Unable to load everything on memory and keep on running without the pen drive (like this) Unable to remove "Install Ubuntu 12.04 LTS" app. Setting the ISO to use maximum amount of space for the OS will leave pen drive with zero space left and any file saved within it from ubuntu is inaccessible from the outside (when plugin the pen drive and not booting from it). Am I missing something? Can those points be fixed?

    Read the article

  • How to fix poor rendering in Windows Movie Maker?

    - by Cyberherbalist
    I am using CamStudio to make some instructional videos about Visual Studio for our development team, and one of the videos needed some editing to remove audio and video mistakes and to add in a better ending. CamStudio outputs to .avi files, and they look pretty good, with the program source code being quite readable. However, after making the edits using WMM, it has rendered the results to a noticeable loss in quality. It has gone from from fairly sharp in focus and adequately readable to recognizable but somewhat blurred. It has also inflated the size of the new .avi file to three times its original size (before cropping half of the vido out!). And the .wmv I attempted to render was was certainly smaller but simply horrible-looking. The left image here is the original video, and the right image is WMM's rendering in .avi format: I have to be doing something wrong, but I know nothing about how to use WMM (my first use of it). I am using default settings to the best of my knowledge. Any suggestions welcomed!

    Read the article

  • Boot problems w/ External HDD

    - by JeremyT
    I'm having a problem with booting a live image off of a USB Hard Drive. I used Startup Disk Creator to make an Ubuntu 11.10 live image on a partition on my external so that I can use it on various computers. I set it up with ~4GB of persistent data So far I've tried it on two computers. One, a Dell, will boot to my external but it loads the select boot device very slowly. It hangs on a screen with an underscore for up to 5 minutes until it allows me to select which drive I want to boot from. After that, it works great. However, on my primary computer it doesn't work at all. It's an Acer from 2009 and it won't even recognize the drive. I don't see it anywhere in BIOS or the select boot disk list. The light on the external will come on at boot just fine so I know it's powering it at this time. Both computers worked perfectly with my 4GB flash drive that I had partitioned half and half (1st half FAT32 and second Ubuntu 11.10 live)

    Read the article

  • Ubuntu 12.04 VPS doesn't boot with mysql in nsswitch.conf

    - by chrisv
    1and1 VPS ("dynamic cloud server") does not boot any more as soon as mysql lookup is enabled in nsswitch.conf - any suggestions appreciated. Minimal setup to reproduce the problem: install Ubuntu 12.04 / LTS minimal server image install mysql-server, libnss-mysql-bg, nscd configure /etc/libnss-mysql.cfg and /etc/libnss-mysql-root.cfg set up appropriate database tables configure nss lookups through mysql in nsswitch.conf passwd: compat mysql group: compat mysql shadow: compat mysql Now, when I try to reboot the server it just hangs. No logs (maybe due to /var not yet being mounted), and I can't see console output (since this is a VPS). Booting into recovery image and removing "mysql" from /etc/nsswitch.conf makes the system bootable again, so this is definitely related to nsswitch/libnss-mysql-bg. There's a thread on gentoo-users which seems to describe a similar problem, unfortunately there's no real solution described, also the thread is rather old (from 2006) so I'm not sure whether this applies to me at all.

    Read the article

  • Should I split my website into different servers

    - by Nyxynyx
    I have a website where a user uploads photos, the photos gets resized and thumbnailed, and stored on the server. At the same time, there are some INSERTS into a MySQL table regarding the photo uploaded (like description, user id etc). The site currently runs off a managed VPS, and I love the support it provides. However it is expensive to store the many small photos and the resizing and thumbnailing processes do cause spikes on the app performance. (Amazon S3 is pretty expensive, especially considering the costs for uploading many small files) Question: Will it be a good idea to move the image processing operations and image storage to another server which is an unmanaged dedicated server with a much lower cost/gb and keep the current VPS for its 24/7 support and hosting the webapp? Or should I move the entire site to the dedicated server? VPS Specs 16 cores 2.4GHz (E5620) 1GB memory 60GB Storage 3.5TB transfer $43/mth Managed (24/7) Dedicated Specs i3 2130 2 cores 3.4+ GHz 16 GB DDR3 2 x 1TB SATA2 storage 15 TB transfer $79/mth Unmanaged (Weekdays support) Software used Apache PHP MySQL Solr PostgreSQL ImageMagick

    Read the article

  • How do I fix the HDMI/DVI display output with Intel HD 4000 Graphics in 12.04?

    - by YumYumYum
    I have an Alienware Dell PC with Intel HD 4000 Graphics (Ivy Bridge) as verified by the output of lspci | grep VGA posted below. 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) The PC only has HDMI and DVI display outputs and using the HDMI output I am only being offered abnormal resolutions. As you can see below it does not even list HDMI1 or DVI1 but just only a fallback. $ export DISPLAY=:0.0 && xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 1360 x 768, maximum 1360 x 768 default connected 1360x768+0+0 0mm x 0mm 1360x768 0.0* 1024x768 0.0 800x600 0.0 640x480 0.0 How can I fix this? Does it just need to be configured differently or will I need to use a newer kernel (as Intel Graphics drivers are included in the kernel)? Follow up: kernel to latest Step 1: Go to: http://kernel.ubuntu.com/~kernel-ppa/mainline/ Go to last: http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/ Download: http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/linux-headers-3.6.0-030600rc3-generic_3.6.0-030600rc3.201208221735_amd64.deb http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/linux-headers-3.6.0-030600rc3_3.6.0-030600rc3.201208221735_all.deb http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/linux-image-3.6.0-030600rc3-generic_3.6.0-030600rc3.201208221735_amd64.deb http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/linux-image-extra-3.6.0-030600rc3-generic_3.6.0-030600rc3.201208221735_amd64.deb Step 2: sudo dpkg -i linux*.deb Step 3: reboot which shows that i have Ubuntu 12.04 with latest $ uname -a Linux sun-Alienware-X51 3.6.0-030600rc3-generic #201208221735 SMP Wed Aug 22 21:36:32 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux But still same problem remain.

    Read the article

  • Are animated GIFs supported in Google Chrome?

    - by user30852
    I have recently been testing a website and found animated gif images that seem to show fine in IE and Firefox but in Google Chrome they only show briefly and then dissapear! This happens if I view the image on the page or view the file directly. Are there any reported problems in displaying GIFs in Chrome, or is it just being fussy? There seemed to have been some problems in older versions of Chrome, but it's hard to believe something as simple as this wouldn't have been fixed by now. The version of Google Chrome I am using is: 4.1.249.1021 Not sure if this is relevant, but some info about the image: Width: 216 pixels Height: 36 pixels Horizontal resolution: 96dpi Vertical resolution: 96dpi Bit Depth: 32 Frame Count: 3 EDIT: Seems to be a problem relating to the latest beta version of Chrome, as it works fine in 4.0.249

    Read the article

  • Elliptical orbit modeling

    - by Nathon
    I'm playing with orbits in a simple 2-d game where a ship flies around in space and is attracted to massive things. The ship's velocity is stored in a vector and acceleration is applied to it every frame as appropriate given Newton's law of universal gravitation. The point masses don't move (there's only 1 right now) so I would expect an elliptical orbit. Instead, I see this: I've tried with nearly circular orbits, and I've tried making the masses vastly different (a factor of a million) but I always get this rotated orbit. Here's some (D) code, for context: void accelerate(Vector delta) { velocity = velocity + delta; // Velocity is a member of the ship class. } // This function is called every frame with the fixed mass. It's a // method of the ship's. void fall(Well well) { // f=(m1 * m2)/(r**2) // a=f/m // Ship mass is 1, so a = f. float mass = 1; Vector delta = well.position - loc; float rSquared = delta.magSquared; float force = well.mass/rSquared; accelerate(delta * force * mass); }

    Read the article

  • Packaging python software with custom dependencies

    - by viraptor
    Hi, I'm looking for a good way to package a Python application that is going to be deployed on a Debian server. The application itself depends on some modules which are not included in base Debian repository, although they might be in the future. This creates some problems... I depend on some patches to those modules. If the original module gets installed one day, the application will break. However if I install everything I need in a virtualenv just for that application, I lose the ability to upgrade Python itself (in case of security updates). The third option would be to rename my fork of the upstream module and just treat it as a completely separate one. But that would mean changing the code (not much work, but it wouldn't be that clean / universal anymore). Are there any other options that I missed? Are there any pros / cons I didn't see in the solutions above?

    Read the article

  • Sprite transparency not effected libGDX

    - by Aon GoltzCrank
    I am making a game using libGDX and Tween Universal Engine. My problem is as follows: I have 2 screens so fars, a splash screen with the logo, and a second one which is the main menu. In the splash screen I use a SpriteBatch and a Sprite with the Texture of the image I want (which goes through some scaling.) Now I use the Tween engine, along with a created SpriteAccessor to control the alpha of the sprite. I fade the picture in, then fade it out, then change it to the next screen. In the next screen I have a single sprite, and a single, 3 slot, sprite array. In this screen I also use the tween engine, I fade the single sprite into the screen (it's the background image) then I try to, using the same method, (Tween.to) to change the alpah of the sprite array (each sprite by itself.), I first set it to 0 using Tween.set, then using the method I change it. This didn't work, after some tests I tried setting the alpha of a single sprite from the array to 0, and that didn't work. It's like the program is ignoring the alpha value, I even printed out the alpha value, it saying 0, but the sprite is visible. How can I fix this, or why might it be caused?

    Read the article

  • How many hours of use before I need to clean a tape drive?

    - by codeape
    I do backups to a HP Ultrium 2 tape drive (HP StorageWorks Ultrium 448). The drive has a 'Clean' LED that supposedly will light up or blink when the drive needs to be cleaned. The drive has been in use since october 2005, and still the 'Clean' light has never been lit. The drive statistics are: Total hours in use: 1603 Total bytes written: 19.7 TB Total bytes read: 19.3 TB My question is: How many hours of use can I expect before I need to clean the drive? Edit: I have not encountered any errors using the drive. I do restore tests every two months, and every backup is verified. Edit 2: The user manual says: "HP StorageWorks Ultrium tape drives do not require regular cleaning. An Ultrium universal cleaning cartridge should only be used when the orange Clean LED is flashing." Update: It is now May 2010 (4.5 years of use), and the LED is still off, I have not cleaned, backups verify and regular restore tests are done.

    Read the article

  • Solaris 10 opencsw git package issue with bitbucket git hosting

    - by zephyrus00jp
    Has anyone tried using `git' from opencsw package in order to work with bitbucket source hosting service (under solaris10)? I tried to use git as the bitbucket documentation explains, and - under Debian GNU/Linux, it worked flawlessly as described, but - under Solaris 10, I got Authentication Failed message. I even tried to run truss to see anything is suspicious but could not find any smoking gun under solaris why it failed. ldd git-binary didnd't show anything suspicious either (except for the libcrypt library which could be a suspicious to think about export restrictions. Have they shipped incompatible version? BUT since the password is typed into https: connection, I suspect it is only a matter of web-level cryptography and should be universal these days.) I am now tempted to compile git suite under solaris 10, but I did find people who seem to be using git with bitbucket under solaris 10 and am wondering what could be wrong.

    Read the article

< Previous Page | 408 409 410 411 412 413 414 415 416 417 418 419  | Next Page >