Search Results

Search found 13318 results on 533 pages for 'svn config'.

Page 414/533 | < Previous Page | 410 411 412 413 414 415 416 417 418 419 420 421  | Next Page >

  • Phpmyadmin location for nginx

    - by multiformeinggno
    I installed nginx and phpmyadmin. I set up a domain with these parameters to test phpmyadmin: server { listen 80; server_name domain.com; root /usr/share/phpmyadmin; index index.php; fastcgi_index index.php; location ~ \.php$ { include /etc/nginx/fastcgi.conf; fastcgi_param SCRIPT_FILENAME /usr/share/phpmyadmin$fastcgi_script_name; fastcgi_pass unix:/var/run/php5-fpm.sock; } } And everything works properly (if I visit the domain I can login to phpmyadmin). The problem is that it was just for testing phpmyadmin, now I'd like to move this to my 'default' site. But I can't figure out how to have it on /phpmyadmin. Here's the config for the 'default' nginx site (where I'd like to put this /phpmyadmin location): server { server_name blabla; access_log /var/log/nginx/$host.access.log; error_log /var/log/nginx/error.log; root /var/www/default; index index.php index.html; location / { try_files $uri $uri/ index.php; } location ~ \.php$ { include /etc/nginx/fastcgi.conf; fastcgi_pass unix:/var/run/php5-fpm.sock; } ### NginX Status location /nginx_status { stub_status on; access_log off; } ### FPM Status location ~ ^/(status|ping)$ { fastcgi_pass unix:/var/run/php5-fpm.sock; access_log off; } }

    Read the article

  • Unexpected behaviour when dynamically add node in HAproxy server

    - by Anand Soni
    I wanted to use HAProxy for my web app for load balancing purpose. I am trying to add a new rabbitmq node dynamically in HAProxy server using command : haproxy -p /var/run/haproxy.pid -sf $(cat /var/run/haproxy.pid). I am doing tcp connection mode with leastconn balance algorithm in load balancing. What is expected is when there is 3 connection in one rabbitmq, I add a new rabbit server in HAProxy server. so the next connection would pass to 2nd rabbitmq server which is not happening in my case. It distributes the connection in haphazardly manner. Here is my config file: defaults log global mode http option httplog option dontlognull retries 3 option redispatch maxconn 2000 contimeout 5000 clitimeout 5000 srvtimeout 5000 listen rabbitmq 0.0.0.0:5672 mode tcp stats enable balance leastconn option tcplog server rabbit01 xx.xx.xx.xx:5672 check server rabbit02 xx.xx.xx.xx:5672 check listen tomcatq 0.0.0.0:80 mode http stats enable balance roundrobin stats refresh 10s stats refresh 10s stats uri /lb?stats stats auth admin:admin option httplog What is the problem causing this behavior? Any suggestion will appreciated.

    Read the article

  • How to tunnel a local port onto a remote server

    - by Trevor Rudolph
    I have a domain that i bought from DynDNS. I pointed the domain at my ip adress so i can run servers. The problem I have is that I don't live near the server computer... Can I use an ssh tunnel? As I understand it, this will let me access to my servers. I want the remote computer to direct traffic from port 8080 over the ssh tunnel to the ssh client, being my laptop's port 80. Is this possible? EDIT: verbose output of tunnel macbookpro:~ trevor$ ssh -R *:8080:localhost:80 -N [email protected] -v OpenSSH_5.2p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /Users/trevor/.ssh/config debug1: Reading configuration data /etc/ssh_config debug1: Connecting to site.com [remote ip address] port 22. debug1: Connection established. debug1: identity file /Users/trevor/.ssh/identity type -1 debug1: identity file /Users/trevor/.ssh/id_rsa type -1 debug1: identity file /Users/trevor/.ssh/id_dsa type 2 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'site.com' is known and matches the RSA host key. debug1: Found key in /Users/trevor/.ssh/known_hosts:9 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /Users/trevor/.ssh/identity debug1: Trying private key: /Users/trevor/.ssh/id_rsa debug1: Offering public key: /Users/trevor/.ssh/id_dsa debug1: Authentications that can continue: publickey,password debug1: Next authentication method: password [email protected]'s password: debug1: Authentication succeeded (password). debug1: Remote connections from *:8080 forwarded to local address localhost:80 debug1: Requesting [email protected] debug1: Entering interactive session. debug1: remote forward success for: listen 8080, connect localhost:80 debug1: All remote forwarding requests processed

    Read the article

  • MAMP - Host name changes to first vhost SSL entry for project with two localhosts

    - by user1322092
    I have two projects that are a copy of each other on my Mac with MAMP. They both have SSL pages. However, whenever I hit the a secured SSL page of project 2, the base_url or host changes to project1 instead of remaining project2. I know this is an issue with the vhosts, because if I switch the order of the entries, the reverse happens. Here's my config files: /Applications/MAMP/conf/extra/httpd-ssl.conf <VirtualHost _default_:443> DocumentRoot "/Applications/MAMP/htdocs/proj1" ServerName proj1.localhost:443 ErrorLog "/Applications/MAMP/Library/logs/error_log" TransferLog "/Applications/MAMP/Library/logs/access_log" SSLEngine on SSLCertificateFile "/Applications/MAMP/conf/apache/ssl/server.crt" SSLCertificateKeyFile "/Applications/MAMP/conf/apache/ssl/server.key" </VirtualHost> <VirtualHost _default_:443> DocumentRoot "/Applications/MAMP/htdocs/proj2" ServerName proj2.localhost:443 ErrorLog "/Applications/MAMP/Library/logs/error_log" TransferLog "/Applications/MAMP/Library/logs/access_log" SSLEngine on SSLCertificateFile "/Applications/MAMP/conf/apache/ssl/server.crt" SSLCertificateKeyFile "/Applications/MAMP/conf/apache/ssl/server.key" </VirtualHost> -------------------- cat /etc/hosts ## # Host Database # # localhost is used to configure the loopback interface # when the system is booting. Do not change this entry. ## 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost 127.0.0.1 proj1.localhost 127.0.0.1 proj2.localhost

    Read the article

  • Blue screen of death while installing any Adobe Air application

    - by Gaurav Sharma
    Whenever I try to install an Air application I get a Blue Screen and then my system restarts. I cannot even take a screenshot of it. This happens with every air application I try to install. I also searched for the same on Adobe forums and found the same problem being faced by someone else. His problem was resolved by uninstalling a software named "Folder Lock". I searched my hard disk for this software and found one, so I deleted that software (shift+delete) and removed all it's traces from registry too but that still doesn't solved the problem. I also tried disabling the antivirus software and then install the air application but this also didn't helped. Here is the screenshot of the BSOD. I was able to install air applications earlier, but now I can't. Anybody having same sort of problem. One colleague of mine is also having the same problem. Please help me out. My system's config is as follows: Windows XP Home sp3 Flash Builder 4, with SDK 4.1, 3.5 installed in it. Adobe Air v 2.5 1.5 GB RAM 1.66 MHz processor Thanks

    Read the article

  • Sharepoint db issue after DB move to SQL 08

    - by JohnyV
    Recently we have moved our sharepoint 2007 db from sql 2000 server to 2008 x64 SQL server. All seems well, however there is a problem where the sql server stops running and the service has to be restarted. The errors mention insufficient internal memory etc. I have tried to start the db using -g384 which is the default in sql 2000 but 256 is default for 2008 I believe. This has not rectified the issue. I was advised that perhaps the issue may be rectified by upgrading to wss 3.0 sp2 however When I have tried to install this i get another error post sp2 update and have to refer back to a vm snapshot. The error after the service pack is Server error: http://go.microsoft.com/fwlink?LinkID=96177 So I guess I have a few questions How can I fix the first issue and the 2nd issue. I have checked out many forums and posts and have tried a few things and still get no joy. Any assistance would be great. UPDATE I have fixed the Server error: http://go.microsoft.com/fwlink?LinkID=96177 the i needed to run the wss sp2 as well as the office servers sp2 then the config wizard then the moss configuration worked. The errors I am getting in SQL are SQL Server was unable to run a new system task, either because there is insufficient memory or the number of configured sessions exceeds the maximum allowed in the server. Verify that the server has adequate memory. Use sp_configure with option 'user connections' to check the maximum number of user connections allowed. Use sys.dm_exec_sessions to check the current number of sessions, including user processes. A read operation on a large object failed while sending data to the client. A common cause for this is if the application is running in READ UNCOMMITED isolation level. The connection will be terminated. There is insufficient system memory in resource pool 'internal' to run this query. These errors are by a user that was created as a service for sharepoint.

    Read the article

  • Can't setup 3 nodes MongoDB recplica set

    - by Victor Lin
    I just follow instructions in MongoDB document Replica Sets - Basics to setup a 3-node Replica set. Everything goes fine when I do the initiate and add first node in the primary. [foo@host-a mongodb]$ bin/mongo localhost MongoDB shell version: 1.8.2 connecting to: localhost > rs.initiate() { "info2" : "no configuration explicitly specified -- making one", "info" : "Config now saved locally. Should come online in about a minute.", "ok" : 1 } > rs.add("host-b") { "ok" : 1 } So far so good, but when I try to add third node myset:PRIMARY> rs.addArb("host-c") Sun Aug 7 22:57:09 MessagingPort recv() errno:104 Connection reset by peer 127.0.0.1:27017 Sun Aug 7 22:57:09 SocketException: remote: error: 9001 socket exception [1] Sun Aug 7 22:57:09 DBClientCursor::init call() failed Sun Aug 7 22:57:09 query failed : local.$cmd { count: "system.replset", query: {}, fields: {} } to: 127.0.0.1 Sun Aug 7 22:57:09 Error: error doing query: failed shell/collection.js:150 Sun Aug 7 22:57:09 trying reconnect to 127.0.0.1 Sun Aug 7 22:57:09 reconnect 127.0.0.1 ok As result, the current primary became secondary, and the host-b was marked as dead, but actually, it is still alive. myset:SECONDARY> rs.status() { "set" : "myset", "date" : ISODate("2011-08-08T04:03:23Z"), "myState" : 2, "members" : [ { "_id" : 0, "name" : "host-a:27017", "health" : 1, "state" : 2, "stateStr" : "SECONDARY", "optime" : { "t" : 1312775799000, "i" : 1 }, "optimeDate" : ISODate("2011-08-08T03:56:39Z"), "self" : true }, { "_id" : 1, "name" : "host-b", "health" : 0, "state" : 6, "stateStr" : "(not reachable/healthy)", "uptime" : 0, "optime" : { "t" : 0, "i" : 0 }, "optimeDate" : ISODate("1970-01-01T00:00:00Z"), "lastHeartbeat" : ISODate("2011-08-08T04:03:22Z"), "errmsg" : "still initializing" } ], "ok" : 1 } How could this happen? I just follow the guide in the document, did I do something wrong? Moreover, I can't do anything on current secondary server. It doesn't allow me to reconfig on the secondary node, but the problem is there is no primary node. myset:SECONDARY> rs.reconfig({}) { "errmsg" : "replSetReconfig command must be sent to the current replica set primary.", "ok" : 0 } Any ideas?

    Read the article

  • Cisco 837 not passing UDP traffic properly (was: DNS query problem)

    - by TessellatingHeckler
    We have a setup of ADSL line - Cisco 837 ADSL router - Zyxel ZyWall 35 firewall/NAT - Switch - LAN. It has been fine for years, suddenly DNS resolution stopped working from the LAN to public DNS servers. No changes that I know of, so I can't revert anything. Current behaviour: DNS requests from the LAN using TCP show up in the oubound firewall log, in the Cisco debug log, in the dns-server-firewall, in tcpdump on the DNS server, the answer comes back, it works fine. DNS requests from the LAN using UDP show up in the outbound firewall log, in the Cisco debug log, but does NOT show in the dns-server-firewall, not in tcpdump on the DNS server, times out. DNS requests from the Cisco using UDP show up in the dns-server-firewall and in tcpdump on the DNS server, answer received, works fine. netcat connections to port 53 or a random port by TCP show up in the dns-server-firewall netcat connections to port 53 or a random port by UDP do not show up in the dns-server-firewall Summary: TCP seems fine throughought. UDP works from the Cisco over the ADSL, and it works from the LAN to the Cisco, but it doesn't seem to cross the Cisco 837 properly. Update: confirmed with netcat that any UDP traffic from the LAN is affected, not just traffic to port 53. Update: If I change the firewall's external IP to any other IP in the subnet, this starts working. When I put it back, it stops working. I now suspect it's an ISP issue (does that sound plausible?), and am removing the Cisco config.

    Read the article

  • getting "No LoginModules configured" for JAAS login under WebSphere security domain

    - by user1739040
    I have a JAX-RPC web service running on WebSphere V7. It requires a UserNameToken for security. I have a custom login module (MyLoginModule) which extracts the username and password, and that module is defined as a JAAS application login in the websphere admin console. Using IBM RAD 8.0, I have bound the token consumer to the login module using the JAAS config name of the module. This all works fine and happy on my development server. Now I realize, that for deployment to another server, I am required to move the JAAS login from global security to a security domain. When I do that, it breaks my web service. I get this SOAP Fault message: com.ibm.wsspi.wssecurity.SoapSecurityException: WSEC6520E: Construction of the login context failed. The exception is : javax.security.auth.login.LoginException: No LoginModules configured for MyLoginModule According to the IBM docs: The JAAS application logins, the JAAS system logins, and the JAAS J2C authentication data aliases can all be configured at the domain level. By default, all of the applications in the system have access to the JAAS logins configured at the global level. The security runtime first checks for the JAAS logins at the domain level. If it does not find them, it then checks for them in the global security configuration. Configure any of these JAAS logins at a domain only when you need to specify a login that is used exclusively by the applications in the security domain. So I am looking to make sure my application is in the domain, and I have tried everything I can think of. (I have assigned the domain to "all scopes", to the entire cell, etc.) No luck, I keep getting the same error response to my web service client. Any help or hints are appreciated.

    Read the article

  • nginx+passenger +static websites= problems

    - by Eugene K
    I've got a Rails app that nginx serves through passenger. I'd also like to serve some static content for a different domain name. But when I add another server block to my config, both websites become unavailable returning HTTP 204. What have I done wrong? What can I do to fix it? Here's the http block of my nginx.conf: https://gist.github.com/4243256 Here's what I added : server { listen 80; server_name website2; root /var/www/website2; location / { index index.html; } } It's going to be a Rails app as well at some point in the future (though I'm not really sure about that, maybe I'm going to use a different back-end solution.) Either way, I don't want anything dynamic to eat away the resources just yet. As of now, this website consists of nothing but index.html and stylesheet.css files in the root directory. What should I do? Thank you in advance. Sincerely yours, Eugene.

    Read the article

  • Apache2: not defined domains directing to the same virtual host

    - by rafaame
    I have Apache2 configured in a debian box with virtual hosts. I have several domains pointing to the box's IP address. The domains whose virtual hosts are configured works perfectly. But if I type in the browser a domain that is pointing to the box but whose the virtual host is not configured, I get to a random virtual host of another domain in the box. Not a random, but one of the virtual hosts (always the same) but I dunno why it is it. The correct would be that the domains that are not configured as virtual hosts return a hostname error or something, right? Does someone know how to fix the problem? One of my virtual hosts config file: <VirtualHost *:80> ServerAdmin [email protected] ServerName dl.domain.com DocumentRoot /var/www/dl.domain.com/public_html/ <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/dl.domain.com/public_html/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> My apache2.conf http://www.speedyshare.com/files/29107024/apache2.conf Thanks for the help

    Read the article

  • Is it possible to shrink the size of an HP Smart Array logical drive?

    - by ewwhite
    I know extension is quite possible using the hpacucli utility, but is there an easy way to reduce the size of an existing logical drive (not array)? The controller is a P410i in a ProLiant DL360 G6 server. I'd like to reduce logicaldrive 1 from 72GB to 40GB. => ctrl all show config detail Smart Array P410i in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: 5001438006FD9A50 Cache Serial Number: PAAVP9VYFB8Y RAID 6 (ADG) Status: Disabled Controller Status: OK Chassis Slot: Hardware Revision: Rev C Firmware Version: 3.66 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 3 secs Surface Scan Mode: Idle Queue Depth: Automatic Monitor and Performance Delay: 60 min Elevator Sort: Enabled Degraded Performance Optimization: Disabled Inconsistency Repair Policy: Disabled Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 15 secs Cache Board Present: True Cache Status: OK Accelerator Ratio: 25% Read / 75% Write Drive Write Cache: Enabled Total Cache Size: 512 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True Array: A Interface Type: SAS Unused Space: 412476 MB Status: OK Logical Drive: 1 Size: 72.0 GB Fault Tolerance: RAID 1+0 Heads: 255 Sectors Per Track: 32 Cylinders: 18504 Strip Size: 256 KB Status: OK Array Accelerator: Enabled Unique Identifier: 600508B1001C132E4BBDFAA6DAD13DA3 Disk Name: /dev/cciss/c0d0 Mount Points: /boot 196 MB, / 12.0 GB, /usr 8.0 GB, /var 4.0 GB, /tmp 2.0 GB OS Status: LOCKED Logical Drive Label: AE438D6A5001438006FD9A50BE0A Mirror Group 0: physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 146 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 146 GB, OK) Mirror Group 1: physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 146 GB, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 146 GB, OK) SEP (Vendor ID PMCSIERA, Model SRC 8x6G) 250 Device Number: 250 Firmware Version: RevC WWID: 5001438006FD9A5F Vendor ID: PMCSIERA Model: SRC 8x6G

    Read the article

  • MAC addresses on dual-NIC mainboards

    - by Tom O'Connor
    Here's a weird problem. We've got a number of devices with dual-NIC mainboards. Some are Realtek NICs, which suck. Some are Intel e1000s, which don't. I've just noticed on 2 machines, one is an Intel NIC, one is a Realtek, that when I put the MAC address of one machine into the dhcpd.conf file on our DHCP server to get it to PXE boot the machine into a rebuild environment, initially everything is fine. The server gets a DHCP allocation, and PXE boots into the Ubuntu preseed enviroment. On one or two machines, it gets as far as Ubuntu's DHCP network configuration, and fails. If i pull up a busybox shell (on tty2 on the installing machine), and run ip link, I can see that the UP flag is set on the other NIC. Here's some stuff. host xeon16-ghz240-gb48-node1 { hardware ethernet BC:AE:C5:07:1F:18; filename "pxelinux.0"; next-server 192.168.123.80; } That's what's in dhcpd.conf This is what ip link on the evil machine looks like. Only one NIC is actually connected (deliberately). As you can see, the NIC that's in the dhcpd config, is not marked as UP, and the link that is UP, isn't the one in DHCP. So far I've seen this on two brands of dual-NIC configuration. Does anyone know 1) what's causing it, and b) What we can do about it?

    Read the article

  • 2 Server FC SAN Configuration

    - by BSte
    I have 2 identical servers: -48GB Ram -8GigE NIC's -2FC NIC's -2x72GB RAID1 Hard Drives -Server 2008R2 Host I also Have a Fibre Channel SAN: -16x146GB RAID10 Hard Drives -2xDual-port FC Controllers (Controller A and B both have ports 1 and 2) -Server 1 has Fiber to Ports A1 and B1 -Server 2 has Fiber to Ports A2 and B2 -I kept the default config with 1 Virtual Disk and 1 Volume -The default mappings show ports A1,A2,B1,B2 on LUN 0 with read-write My goal is: -2xVM's with IIS and Guest Level Failover -2xVM's with SQL 2008 Enterprise using a Single DB and Guest Level Failover -1xVM that is an application server, preferable with Host Failover. From what I read, this will also need AD for clustering to work. -I need at least 1 VM always running for IIS and the SQLDB. This includes hardware failover and application (ie: reboot a VM for Critical updates) I was told I could install the VM's and run them from the SAN, and this is what I've tried: Installed MPIO and HyperV on Server1 and Server 2 Added the SAN as Disk E: on both servers, made it GPT and formatted NTFS Configured HyperV on both server to store use E:\VD and E:\VHD On server1, I was able to install 3 VM's on the SAN and all worked well. On server2, I would start installing the other 2 VM's, but always at some point the VM's would get a corrupt .VHD message (either server). Everything I found about the message typically related to antivirus, so I removed all antivirus on both Host servers (now only running 2008R2). I reformatted drive E: (SAN), recreated the VHD and VD directories, installed 3 VM's on Server 1, and then had the same issue when installing VM's on Server2. Obviously something is wrong, but I'm not certain what exactly. My questions: 1) Are my goals possible with this hardware setup? -I've read 2008R2 supports FC SAN's, but a lot of articles seem to only give examples with iSCSCI setups 2) What would be the suggested route on setting up the SAN (disks,volumes,LUN's)? I've worked with HyperV on a single machine before and never had issues. Actual experience working on SAN's and clustering is new to me. Any suggestions or recommendations to get me in the right direction would be much appreciated.

    Read the article

  • Why does my Belkin wireless router has eMule port open?

    - by Jeremy Powell
    I have a Belkin F6D4230-4 v1 router. When I port scan it with nmap I get the following: $ sudo nmap -sS -A -T5 192.168.2.1 -p- Starting Nmap 5.00 ( http://nmap.org ) at 2010-04-17 11:40 CDT Interesting ports on 192.168.2.1: Not shown: 65532 closed ports PORT STATE SERVICE VERSION 80/tcp open http Belkin 2307 wifi router http config (IP_SHARER httpd 1.0) |_ html-title: '+i1+' 4661/tcp filtered unknown 4662/tcp filtered edonkey MAC Address: 00:22:75:5D:52:D8 (Belkin International) Device type: WAP|broadband router|firewall|printer|specialized|webcam Running (JUST GUESSING) : Linksys embedded (95%), TRENDnet embedded (95%), Netgear embedded (92%), Canon embedded (89%), On Time RTOS (89%), Symantec embedded (89%), D-Link embedded (86%), Polycom embedded (85%) Aggressive OS guesses: Linksys WRT54GC or TRENDnet TEW-431BRP wireless broadband router (95%), TRENDnet TW100-BRF114 broadband router (95%), Netgear FR114P ProSafe VPN firewall (92%), Canon PIXMA MX850 printer (89%), On Time RTOS (89%), Symantec Firewall/VPN 100 (89%), D-Link DI-714P+ wireless broadband router (86%), Polycom ViewStation video conferencing system (85%) No exact OS matches for host (test conditions non-ideal). Network Distance: 1 hop Service Info: Device: WAP OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 21.57 seconds Why are the 4461 and 4462 ports open? This is a basic, out-of-the-box installation.

    Read the article

  • Xen hipervisor 4.1 Kernel Panic on Ubuntu 12.04

    - by rkmax
    I have a fresh Ubuntu 12.04.1 amd64 server install following this guide I have used LVM option used all disk and make 2 LV /dev/mapper/vg-root / (80GB) vg-swap swap (4GB) now i install xen with apt-get install xen-hypervisor-4.1-amd64 and config /etc/default/grub like the guide and add GRUB_CMDLINE_XEN_DEFAULT="dom0_mem=768M" later all this i exec update-grub and reboot. but when i try to boot with Xen 4.1-amd64 always i get a kernel panic with the message Domain-0 allocation is too small for kernel image my questions are: this error is about what? where i can grow this allocation for avoid this error? grub.cfg menuentry 'Ubuntu GNU/Linux, with Xen 4.1-amd64 and Linux 3.2.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os --class xen { insmod part_gpt insmod ext2 set root='(hd0,gpt2)' search --no-floppy --fs-uuid --set=root 3541e241-7f39-4ebe-8d99-c5306294c266 echo 'Loading Xen 4.1-amd64 ...' multiboot /xen-4.1-amd64.gz placeholder dom0_mem=768M echo 'Loading Linux 3.2.0-29-generic ...' module /vmlinuz-3.2.0-29-generic placeholder root=/dev/mapper/backup--xen-root ro rootdelay=180 echo 'Loading initial ramdisk ...' module /initrd.img-3.2.0-29-generic } Note: I've followed this guide too

    Read the article

  • Apache2 Modpython : IOError: Write failed, client closed connection.

    - by llazzaro
    This is the error : [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] mod_python (pid=9528, interpreter='realpage.com', phase='PythonHandler', handler='django.core.handlers.modpython'): Application error [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] ServerName: 'realpage.dom' [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] DocumentRoot: '/htdocs' [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] URI: '/' [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] Location: '/' [Mon Mar 01 12:19:50 2010] [error] [client XXX.XX.248.60] Directory: None [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] Filename: '/htdocs' [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] PathInfo: '/' [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] Traceback (most recent call last): [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] File "/usr/lib/python2.5/site-packages/mod_python/importer.py", line 1537, in HandlerDispatch\n default=default_handler, arg=req, silent=hlist.silent) [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] File "/usr/lib/python2.5/site-packages/mod_python/importer.py", line 1229, in _process_target\n result = _execute_target(config, req, object, arg) [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] File "/usr/lib/python2.5/site-packages/mod_python/importer.py", line 1128, in _execute_target\n result = object(arg) [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] File "/usr/lib/python2.5/site-packages/django/core/handlers/modpython.py", line 228, in handler\n return ModPythonHandler()(req) [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] File "/usr/lib/python2.5/site-packages/django/core/handlers/modpython.py", line 220, in call\n req.write(chunk) [Mon Mar 01 12:19:50 2010] [error] [client XXX.XX.248.60] IOError: Write failed, client closed connection. Please! I am sure you need more information in order to find the bug, please tell me what and how to get it. The error is throwing every time!

    Read the article

  • solaris zpool SSD cache device "faulted"

    - by John-ZFS
    I am trying to get over these SATA SSD errors - smartctl command failed to read the SATA SSD - SATA is not supported what could be the reason for errors? does this mean that SSD has reached EOL & needs to be replacement? errors: No known data errors pool: zpool1216 state: DEGRADED status: One or more devices are faulted in response to persistent errors. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Replace the faulted device, or use 'zpool clear' to mark the device repaired. scan: scrub repaired 0 in 0h24m with 0 errors on Fri May 18 14:31:08 2012 config: NAME STATE READ WRITE CKSUM zpool1216 DEGRADED 0 0 0 raidz1-0 ONLINE 0 0 0 c11t10d0 ONLINE 0 0 0 c11t11d0 ONLINE 0 0 0 c11t12d0 ONLINE 0 0 0 c11t13d0 ONLINE 0 0 0 c11t14d0 ONLINE 0 0 0 c11t15d0 ONLINE 0 0 0 c11t16d0 ONLINE 0 0 0 c11t1d0 ONLINE 0 0 0 c11t2d0 ONLINE 0 0 0 c11t3d0 ONLINE 0 0 0 c11t4d0 ONLINE 0 0 0 c11t5d0 ONLINE 0 0 0 c11t6d0 ONLINE 0 0 0 c11t7d0 ONLINE 0 0 0 c11t8d0 ONLINE 0 0 0 c11t9d0 ONLINE 0 0 0 logs c9d0 FAULTED 0 0 0 too many errors cache c10d0 FAULTED 0 17 0 too many errors

    Read the article

  • Force dual-mono audio (L+L or R+R) in Youtube video playback for one-channel audio movies

    - by jakub.g
    Occasionally, I find Youtube videos that have only one audio channel (only left or only right); example video (left channel only). This is quite annoying, especially with headphones on, as I hear sound in one ear, and no sound in the other. So, I want to be able to easily force dual mono (Left+Left or Right+Right) when I find that kind of video, and switch to normal stereo after I finish watching it. I have my headphones plugged well / I don't create audio/video - I want it for real-time playback only, In Windows audio config, setting balance 100% to Left / Right doesn't help (I have either still only left when moved to left, and no sound at all when moved to right), I've checked all the configurations in Control Panel > Sounds and Audio Devices > Audio > Sound Playback > Advanced like suggested in this post, in conjunction with moving balance left/right, and it doesn't seem to have any impact on actual sound I hear in headphones, No need to mix L with R, I just want L+L or R+R, I prefer software solutions to buying a stereo-to-mono adapter, Free solutions please, no $$$ ones, neither trials etc., In Control Panel > Realtek HD Sound Effect Manager I can turn on various mumbo-jumbo effects like: Concert Hall / Hangar / Bathroom / whatever environment (and in fact it makes the sound appear in two ears, but well, it's ridiculous to do this;), but there is no Dual Mono option. Finally, I know I can force L+L or R+R in VLC Player which supports Youtube (well, a little hack is needed, because Youtube internals change from time to time) but it is not very convenient to launch VLC just to play Youtube video - I want to keep it in the browser, I use Firefox generally (but well, if I don't find easier way, I will launch it in VLC).

    Read the article

  • Samba authentication problem when attempting to connect from Windows client

    - by Camsoft
    I've got a Linux server running Ubuntu and Samba. I've created two shares in Samba that point to directories that are owned by the user "cameron". When I attempt to connect to these shares on Windows 7 is connects and allows me to see the files but they are read-only. This is the desired action for guest users but not for authenticated users. My user on the Windows client is "Cameron" and has the same password as the Linux user "cameron". I don't think my Windows user has authenticated against the Linux user. I even created a users.map file to map the user cameron (linux) to Cameron (windows) but still it does not work. Here is my samba config file (UPDATED): [global] server string = %h server (Samba, Ubuntu) map to guest = Bad User passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . username map = /etc/samba/users.map syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 os level = 65 preferred master = Yes dns proxy = No wins support = Yes usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d valid users = cameron write list = cameron [www] path = /usr/local/apache2/htdocs write list = @www-data force group = www-data guest ok = Yes [cameron] path = /home/cameron write list = @www-data force group = www-data guest ok = Yes

    Read the article

  • Using virtual IP with stunnel and haproxy

    - by beardtwizzle
    Hi there, We have a load-balancer setup, in which an HTTPS Request flows through the following steps:- Client -> DNS -> stunnel on Load-Balancer -> HAProxy on LB -> Web-Server This setup works perfectly when stunnel is listening to the local IP of the Load-Balancer. However in our setup we have 2 load-balancers and we want to be able to listen to a virtual IP, which only ever exists on one LB at a time (keepalived flips the IP to the second LB if the first one falls over). HAProxy has no problem in doing this (and I can ping the assigned virtual IP on the load-balancer I'm testing), but it seems stunnel hates the concept. Has anyone achieved this before (below is my stunnel config - as you can see I'm actually listening for ALL traffic on 443):- cert= /etc/ssl/certs/mycert.crt key = /etc/ssl/certs/mykey.key ;setuid = nobody ;setgid = nogroup pid = /etc/stunnel/stunnel.pid debug = 3 output = /etc/stunnel/stunnel.log socket=l:TCP_NODELAY=1 socket=r:TCP_NODELAY=1 [https] accept=443 connect=127.0.0.1:8443 TIMEOUTclose=0 xforwardedfor=yes Sorry for the long-winded question!

    Read the article

  • NRPE unable to read output, but why?

    - by ticktockhouse
    I have this problem with NRPE, all the stuff I've found so far on the net seems to point me at things I've already tried. # /usr/local/nagios/plugins/check_nrpe -H nrpeclient gives NRPE v2.12 as expected. Running the command by hand (as defined in nrpe.cfg on "nrpeclient", gives the expected response nrpe.cfg: command[check_openmanage]=/usr/lib/nagios/plugins/additional/check_openmanage -s -e -b ctrl_driver=0 bat_charge "Expected response" But if I try to run the command from the Nagios server I get the following: # /usr/local/nagios/plugins/check_nrpe -H comxps -c check_openmanage NRPE: Unable to read output Can anyone think of anywhere else I might have made a mistake with this? I've done the same thing on multiple other servers with no problem. The only difference I can think of with this is that this box is RHEL 5 based, whereas the others are RHEL 4 based. Those two bits above that I've tested are the what most people seem to suggest when people have had this problem. I should mention that I get a weird error in the logs when I restart nrpe: nrpe[14534]: Unable to open config file '/usr/local/nagios/etc/nrpe.cfg' for reading nrpe[14534]: Continuing with errors... nrpe[14535]: Starting up daemon nrpe[14535]: Warning: Daemon is configured to accept command arguments from clients! nrpe[14535]: Listening for connections on port 5666 nrpe[14535]: Allowing connections from: bodbck,combck,nam-bck Even though, it's plainly reading that /usr/local/nagios/etc/nrpe.cfg file to get the stuff it's talking about further down..

    Read the article

  • OpenVPN via DD-WRT

    - by user140491
    I am using DD-WRT with my Buffalo G300NH. I notice in my log files: Wed Oct 10 01:08:25 2012 us=343000 Cannot open /tmp/openvpn/dh.pem for DH parameters: error:02001003:system library:fopen:No such process: error:2006D080:BIO routines:BIO_new_file:no such file I have looked at other answers regarding this error. I have tried to no avail. 755 are chmod rights to /tmp/openvpn. At this point, I can not connect outside my LAN via OpenVPN. My server config looks like this: #mode server #tls-server push "route 192.168.11.1 255.255.255.0" push "dhcp-option DNS 10.8.0.1" server 10.8.0.0 255.255.255.0 port 1194 proto udp dev tun0 ifconfig 10.8.0.1 10.8.0.2 #secret /tmp/static.key ca /tmp/openvpn/ca.crt cert /tmp/openvpn/cert.pem key /tmp/openvpn/key.pem dh /tmp/openvpn/dh.pem keepalive 10 120 comp-lzo persist-key persist-tun verb 5 management localhost 5001 Can someone, knowledgeable, of this error kindly help? i have been going on several days, trying to sort it out. I like all nighters though!!

    Read the article

  • Easyphp Web Setup

    - by Dominique
    I've tried to setup an EasyPHP in local and make it visible from the Web via DynDNS, which I've already successed many times before, but now this just doesn't work, maybe I've forgotten something... *The "server" is a common workstation. Here is what I have done : 1) Installed EasyPhp (with a index.php/html file in WWW folder) 2) Changed the port in the config to port 80 3) Forwarded port 80 to the server IP in my router configuration 4) Added the server to the router DMZ *Also tried removing antivirus/firewall I've installed PortListener, pointed it on port 80, and when I access "myname.dyndns.com" it says Client connected GET / HTTP/1.1 Host: xyz.dyndns-remote.com User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.0; fr; rv:1.9.2.12) Gecko/20101026 Firefox/3.6.12 (.NET CLR 3.5.30729) Accept: text/html,application/xhtml+xml,application/xml;q=0.9,/;q=0.8 Accept-Language: fr,fr-fr;q=0.8,en-us;q=0.5,en;q=0.3 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 115 Connection: keep-alive So the server is accessible via Web, receive the connection successfully, but in my browser it says that the connection failed and show nothing...

    Read the article

  • How to verify PostgreSQL 9 has installed correctly on a CentOS server?

    - by A4J
    I'm trying to install the PG (postgres) gem on a CentoOS server, but it keeps saying Postgres is too old, even though I have upgraded it to 9.1.3 (as per the instructions here http://www.davidghedini.com/pg/entry/install_postgresql_9_on_centos). I am using CentOS 5.8 (and Ruby 1.9.3) Here is the error message: Building native extensions. This could take a while... ERROR: Error installing pg: ERROR: Failed to build gem native extension. /usr/local/bin/ruby extconf.rb checking for pg_config... yes Using config values from /usr/bin/pg_config checking for libpq-fe.h... yes checking for libpq/libpq-fs.h... yes checking for pg_config_manual.h... yes checking for PQconnectdb() in -lpq... yes checking for PQconnectionUsedPassword()... no Your PostgreSQL is too old. Either install an older version of this gem or upgrade your database. *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. psql --version confirms my version: psql (PostgreSQL) 9.1.3 I can confirm packages installed: Setting up Install Process Package postgresql91-9.1.3-1PGDG.rhel5.x86_64 already installed and latest version Package postgresql91-devel-9.1.3-1PGDG.rhel5.x86_64 already installed and latest version Package postgresql91-server-9.1.3-1PGDG.rhel5.x86_64 already installed and latest version Package postgresql91-libs-9.1.3-1PGDG.rhel5.x86_64 already installed and latest version Package postgresql91-contrib-9.1.3-1PGDG.rhel5.x86_64 already installed and latest version Nothing to do Any ideas on how to troubleshoot this? Thanks in advance.

    Read the article

< Previous Page | 410 411 412 413 414 415 416 417 418 419 420 421  | Next Page >