Search Results

Search found 24623 results on 985 pages for 'linux'.

Page 415/985 | < Previous Page | 411 412 413 414 415 416 417 418 419 420 421 422  | Next Page >

• Configure iptables with a bridge and static IPs

  - by Andrew Koester

  I have my server set up with several public IP addresses, with a network configuration as follows (with example IPs): eth0 \- br0 - 1.1.1.2 |- [VM 1's eth0] | |- 1.1.1.3 | \- 1.1.1.4 \- [VM 2's eth0] \- 1.1.1.5 My question is, how do I set up iptables with different rules for the actual physical server as well as the VMs? I don't mind having the VMs doing their own iptables, but I'd like br0 to have a different set of rules. Right now I can only let everything through, which is not the desired behavior (as br0 is exposed). Thanks!

  Read the article

• How can I measure actual memory usage from my running processes?

  - by NullUser

  I have two servers, server1 and server2. Both of them are identical HP blades, running the exact same OS (RHEL 5.5). Here's the output of free for both of them: ### server1: total used free shared buffers cached Mem: 8017848 2746596 5271252 0 212772 1768800 -/+ buffers/cache: 765024 7252824 Swap: 14188536 0 14188536 ### server2: total used free shared buffers cached Mem: 8017848 4494836 3523012 0 212724 3136568 -/+ buffers/cache: 1145544 6872304 Swap: 14188536 0 14188536 If I understand correctly, server2 is using significantly more memory for disk I/O caching, which still counts as memory used. But both are running the same OS and if I remember correctly, I configured both with the same parameters when they were installed. I did a diff on /etc/sysctl.conf and they are identical. The problem is, I am collecting memory usage and other metrics over a period of time, (eg: vmstat, iostat, etc.) while a load is generated on the system. The memory used for caching is throwing off my calculations on the results. How can I measure actual memory usage from my running processes, rather than system usage? Is used - (buffers + cached) a valid way to measure this?

  Read the article

• What can impact the throughput rate at tcp or Os level?

  - by Jimm

  I am facing a problem, where running the same application on different servers, yields unexpected performance results. For example, running the application on a particular faster server (faster cpu, more memory), with no load, yields slower performance than running on a less powerful server on the same network. I am suspecting that either OS or TCP is causing the slowness on the faster server. I cannot use IPerf , unless i modify it, because the "performance" in my application is defined as Component A sends a message to Component B. Component B sends an ACK to component A and ONLY then Component A would send the next message. So it is different from what IPerf does, which to my knowledge, simply tries to push as many messages as possible. Is there a tool that can look at OS and TCP configuration and suggest the cause of slowness?

  Read the article

• I have a perl script that is supposed to run indefinitely. It's being killed... how do I determine who or what kills it?

  - by John O

  I run the perl script in screen (I can log in and check debug output). Nothing in the logic of the script should be capable of killing it quite this dead. I'm one of only two people with access to the server, and the other guy swears that it isn't him (and we both have quite a bit of money riding on it continuing to run without a hitch). I have no reason to believe that some hacker has managed to get a shell or anything like that. I have very little reason to suspect the admins of the host operation (bandwidth/cpu-wise, this script is pretty lightweight). Screen continues to run, but at the end of the output of the perl script I see "Killed" and it has dropped back to a prompt. How do I go about testing what is whacking the damn thing? I've checked crontab, nothing in there that would kill random/non-random processes. Nothing in any of the log files gives any hint. It will run from 2 to 8 hours, it would seem (and on my mac at home, it will run well over 24 hours without a problem). The server is running Ubuntu version something or other, I can look that up if it matters.

  Read the article

• rdisk value in boot.ini maps to which disk?

  - by MA1

  Hi All Following are the contents of a sample boot.ini: [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /NOEXECUTE=OPTIN /FASTDETECT multi(0)disk(0)rdisk(0)partition(2)\WINNT="Windows 2000 Professional" /fastdetect multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /NOEXECUTE=OPTIN /FASTDETECT rdisk value tells the physical disk number. so, if i have three hard disks say: /dev/sda /dev/sdb /dev/sdc than how to know which disk(/dev/sda or /dev/sdb or /dev/sdc) is rdisk(0) and which disk is rdisk(1) etc Regards,

  Read the article

• Closing idle connections with iptables.

  - by kyku

  Hi, I have a server application that does not remove idle connections (resulting from for example client or communication failures). Is it possible to configure iptables to monitor activity on sockets and close connections haven't had any activity for a specified amount of time?

  Read the article

• How to echo current document.title with Firefox Vimperator -> autocmd?

  - by shox

  When I try to do this :autocmd LocationChange .* echo document.title the first page that gets displayed makes no echo. If I proceed to the next tab, the title of the last tab gets echoed. Does anybody know how I can get for every landing on the page the title echoed instantly instead of when "leaving" the tab? And it only works every two times. If I go through my tabs 1,2,3,4,5,6,7,8 (next tab) the output will be (being at 1 currently) _blank Title of 1 _ Title of 3 _ Title of 5 _ Title of 7 _ (now being at tab 8) But I want Title of 1 Title of 2 ... Any ideas?

  Read the article

• setting up a second monitor in centos

  - by Rob

  I have CentOS installed on my laptop. I hooked up my TV via VGA and it works, just not as I'd like it to. The left side (on the tv) is cut off, like the image is justified too far left. I want it to be centered, but I also want to use a different resolution. You see, I use a netbook, and thus my laptop screen is tiny, meaning some things cant fit in the same window without scrolling. I want my TV to fix that for me.

  Read the article

• A way to auto cycle (close) through all screen sessions

  - by JBWhitmore

  I frequently use screen when I log into the interactive nodes to a supercomputer that I have access to -- and I often run things and move on. There are about 20 separate nodes that I can log into; and if I check any one of them I'll have something like 4 detached sessions. Each of those sessions will have maybe 5 screen sessions within that. Is there a quick way to cycle through all of these and close them down if they are not running any processes? My current process is to screen -ls and then screen -r #### then type exit until I'm back to the base screen.

  Read the article

• How do I stop someone from saturating my line & wasting CPU cycles

  - by JoshRibs

  My web host shows inbound & outbound traffic with mrtg. I have a steady 3.5mbps inbound traffic from Nigeria. Even assuming the source IPs & destination ports are blocked with Iptables & verifying nothing is listening on those ports, will the traffic still always pass through the switch & "get" to my server (where my server wastes CPU cycles "dropping" the packets)? Assuming I was setup with a hardware firewall, the traffic would still show in mrtg assuming the firewall is behind the switch? So is there any way to stop someone from saturating your 100mbps line, if they also have a 100mbps line? Other than filing an abuse complaint with the kind folks in Nigeria?

  Read the article

• Is Fedora a bad choice for a server?

  - by Jakobud

  I'm taking over IT responsibilities at a small company. Most of the servers appear to be running various releases of Fedora (file servers, backup servers, oracle servers, etc). I don't have much experience with Fedora, but I was under the impression its geared for end user desktops/workstations/laptops. Is Fedora a bad choice for servers?

  Read the article

• Preventing - Large Number of Failed Login Attempts from IP

  - by Silver89

  I'm running a CentOS 6.3 server and currently receive emails entitled "Large Number of Failed Login Attempts from IP" from my server every 15 minutes or so. Surely with the below configured it should mean only the person using the (my static ip) should be able to even try and log in? If that's the case where are these remote unknown users trying to log into which is generating these emails? Current Security Steps: root login is only allowed without-password StrictModes yes SSH password login is disabled - PasswordAuthentication no SSH public keys are used SSH port has been changed to a number greater than 40k cPHulk is configured and running Logins limited to specific ip address cPanel and WHM limited to my static ip only hosts.allow sshd: (my static ip) vsftpd: (my static ip) whostmgrd: (my static ip) hosts.deny ALL : ALL

  Read the article

• dnsmasq Client TTL

  - by user548971

  I have a situation where my hosts file is constantly changing. Because of this I don't want clients to cache ip addresses resolved using the hosts file. Here is the command that starts dnsmasq for me: /usr/sbin/dnsmasq -K -R -y -Z -b -E -S 8.8.8.8 -l /tmp/dhcp.leases -r /tmp/resolv.conf.auto --stop-dns-rebind --rebind-localhost-ok --dhcp-range=lan,192.168.2.2,192.168.2.249,255.255.255.0,12h -2 eth0 In looking at this site: http://www.thekelleys.org.uk/dnsmasq/docs/dnsmasq-man.html I see that the -T option has this description: -T, --local-ttl=<time> When replying with information from /etc/hosts or the DHCP leases file dnsmasq by default sets the time-to-live field to zero, meaning that the requester should not itself cache the information. This is the correct thing to do in almost all situations. This option allows a time-to-live (in seconds) to be given for these replies. This will reduce the load on the server at the expense of clients using stale data under some circumstances. My command doesn't have the -T option. Do I need it or does dnsmasq default TTL to zero without it?

  Read the article

• How to search a text file for strings between two tokens in Ubuntu terminal and save the output?

  - by Blue

  How can I search a text file for this pattern in Ubuntu terminal and save the output as a text file? I'm looking for everything between the string "abc" and the string "cde" in a long list of data. For example: blah blah abc fkdljgn cde blah blah blah blah blah blah abc skdjfn cde blah In the example above I would be looking for an output such as this: fkdljgn skdjfn It is important that I can also save the data output as a text file. Can I use grep or agrep and if so, what is the format?

  Read the article

• push commits to git (gitolite) repository messes up file permissions (no more trac access)

  - by klemens

  already posted here so feel free to answer there. everytime i commit/push something to the git server the file permissions change (all added/edited files in the repository have no read and execute access for the group). thus trac can't access the repository. do I need to change permissions of the folder differently? chmod u=rwx,g=rx,o= -R /home/git/repositories or do i need to setup gitolite somehow to write files with different permissions??? regards, klemens

  Read the article

• Fastest reliable way to open the terminal?

  - by meder

  I actually had my SUPER_L ( left windows key ) binded to gnome-terminal, but for whatever reason ever since upgrading to 9.04 Ubuntu from 8.10 Intrepid it seemed to break the key binding. It was very handy because I could throw open the terminal with one key ( sorry but alt-f2 and typing gnome-terminal isn't practical for me ). Or perhaps it reset all the keybindings? I remember using xev and some gui type interface that was akin to Win32 registry editor. Anyway, I'm curious as to what you guys use to open the terminal.

  Read the article

• proftpd initial directory for each user

  - by Dels

  After successfully setting up proftpd server, i want to add initial directory for each users, i have 2 user, webadmin that can access all folder and upload that can only access upload folder ... # Added config DefaultRoot ~ RequireValidShell off AuthUserFile /etc/proftpd/passwd # VALID LOGINS <Limit LOGIN> AllowUser webadmin, upload DenyALL </Limit> <Directory /home/webadmin> <Limit ALL> DenyAll </Limit> <Limit DIRS READ WRITE> AllowUser webadmin </Limit> </Directory> <Directory /home/webadmin/upload> <Limit ALL> DenyAll </Limit> <Limit DIRS READ WRITE> AllowUser upload </Limit> </Directory> All set ok, but i need to tell my ftp client initial directory for each user (otherwise it keep fail to retrieve directory), which i think it should be automatically set for each user (no need to type initial directory in ftp client)

  Read the article

• Input/output (read) errors in Bacula while setting up a Tape Drive + Autochanger

  - by Kyle Brandt

  When running the label barcode command in bacula I am getting Input/output errors. I am just getting started in trying to set this up: Connecting to Storage daemon TapeDevice at ny-back01.ny.stackoverflow.com:9103 ... Sending label command for Volume "ACJ332" Slot 1 ... 3307 Issuing autochanger "unload slot 8, drive 0" command. 3304 Issuing autochanger "load slot 1, drive 0" command. 3305 Autochanger "load slot 1, drive 0", status is OK. block.c:1010 Read error on fd=5 at file:blk 0:0 on device "ULTRIUM-HH4" (/dev/st0). ERR=Input/output error. 3000 OK label. VolBytes=64512 DVD=0 Volume="ACJ332" Device="ULTRIUM-HH4" (/dev/st0) Catalog record for Volume "ACJ332", Slot 1 successfully created. Sending label command for Volume "ACJ331" Slot 2 ... 3307 Issuing autochanger "unload slot 1, drive 0" command. 3304 Issuing autochanger "load slot 2, drive 0" command. 3305 Autochanger "load slot 2, drive 0", status is OK. block.c:1010 Read error on fd=5 at file:blk 0:0 on device "ULTRIUM-HH4" (/dev/st0). ERR=Input/output error. 3000 OK label. VolBytes=64512 DVD=0 Volume="ACJ331" Device="ULTRIUM-HH4" (/dev/st0) Catalog record for Volume "ACJ331", Slot 2 successfully created. Sending label command for Volume "ACJ328" Slot 3 ... 3307 Issuing autochanger "unload slot 2, drive 0" command. 3304 Issuing autochanger "load slot 3, drive 0" command. 3305 Autochanger "load slot 3, drive 0", status is OK. block.c:1010 Read error on fd=5 at file:blk 0:0 on device "ULTRIUM-HH4" (/dev/st0). ERR=Input/output error. 3000 OK label. VolBytes=64512 DVD=0 Volume="ACJ328" Device="ULTRIUM-HH4" (/dev/st0) Catalog record for Volume "ACJ328", Slot 3 successfully created. Sending label command for Volume "ACJ329" Slot 4 ... 3307 Issuing autochanger "unload slot 3, drive 0" command. 3304 Issuing autochanger "load slot 4, drive 0" command. 3305 Autochanger "load slot 4, drive 0", status is OK. block.c:1010 Read error on fd=5 at file:blk 0:0 on device "ULTRIUM-HH4" (/dev/st0). ERR=Input/output error. 3000 OK label. VolBytes=64512 DVD=0 Volume="ACJ329" Device="ULTRIUM-HH4" (/dev/st0) Catalog record for Volume "ACJ329", Slot 4 successfully created. Sending label command for Volume "ACJ335" Slot 5 ... 3307 Issuing autochanger "unload slot 4, drive 0" command. 3304 Issuing autochanger "load slot 5, drive 0" command. 3305 Autochanger "load slot 5, drive 0", status is OK. block.c:1010 Read error on fd=5 at file:blk 0:0 on device "ULTRIUM-HH4" (/dev/st0). ERR=Input/output error. 3000 OK label. VolBytes=64512 DVD=0 Volume="ACJ335" Device="ULTRIUM-HH4" (/dev/st0) Catalog record for Volume "ACJ335", Slot 5 successfully created. Sending label command for Volume "ACJ334" Slot 6 ... 3307 Issuing autochanger "unload slot 5, drive 0" command. 3304 Issuing autochanger "load slot 6, drive 0" command. 3305 Autochanger "load slot 6, drive 0", status is OK. block.c:1010 Read error on fd=5 at file:blk 0:0 on device "ULTRIUM-HH4" (/dev/st0). ERR=Input/output error. 3000 OK label. VolBytes=64512 DVD=0 Volume="ACJ334" Device="ULTRIUM-HH4" (/dev/st0) Catalog record for Volume "ACJ334", Slot 6 successfully created. Sending label command for Volume "ACJ333" Slot 7 ... 3307 Issuing autochanger "unload slot 6, drive 0" command. 3304 Issuing autochanger "load slot 7, drive 0" command. 3305 Autochanger "load slot 7, drive 0", status is OK. block.c:1010 Read error on fd=5 at file:blk 0:0 on device "ULTRIUM-HH4" (/dev/st0). ERR=Input/output error. 3000 OK label. VolBytes=64512 DVD=0 Volume="ACJ333" Device="ULTRIUM-HH4" (/dev/st0) Catalog record for Volume "ACJ333", Slot 7 successfully created. Sending label command for Volume "ACJ330" Slot 8 ... 3307 Issuing autochanger "unload slot 7, drive 0" command. Bacula-dir: # Definition of file storage device Storage { Name = TapeDevice # Do not use "localhost" here Address = ny-back01.... # N.B. Use a fully qualified name here SDPort = 9103 Password = "..." Device = ULTRIUM-HH4 Media Type = LTO-4 Media Type = File Autochanger = Yes } Bacula-sd: Autochanger { Name = StorageLoader1U Device = ULTRIUM-HH4 Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d" Changer Device = /dev/sg5 } Device { Name = ULTRIUM-HH4 Media Type = LTO-4 Archive Device = /dev/st0 AutomaticMount = yes; AlwaysOpen = yes; RemovableMedia = yes; RandomAccess = no; AutoChanger = yes; RandomAccess = no; } Anyone knows what this means / why I am getting this?

  Read the article

• Prefork or Worker MPM for amazon xlarge server?

  - by Netismine

  I'm trying to measure would it be better to have prefork or worker mpm apache module for the server I'm working on, which is Amazon X-Large 15 GB memory 8 EC2 Compute Units (4 virtual cores with 2 EC2 Compute Units each) and that will run a Magento website with about 50 active users at once. Site serves a lot of images and about 45 requests per page. Images sometimes hang, so it seems worker would be a better option? Thanks

  Read the article

• Best server OS for running up-to date software

  - by rjstelling

  I need to configure a server (*nix) that runs our (bespoke) CMS and Applications. In the bast I have defaulted to using Cent OS 5, but I find this difficult to upgrade the software to the versions we require. For example, we need PHP 5.3, but CentOS 5 has 5.2. Updating is fine but breaks something else (normally MySQL support in PHP). Eventually it will get to a situation where I can't upgrade because of missing dependancies and incompatible versions. Error: Missing Dependency: httpd = 2.2.3-43.el5.centos.3 is needed by package httpd-devel-2.2.3-43.el5.centos.3.i386 (updates) Is there a better alternative OS for hassle free updates, I need: Apache 2.2.17 (the development version for apxs) MySQL 5.5.8 PHP 5.3.5

  Read the article

• Force ID of user created by apt-get

  - by Bart van Heukelom

  Context: I'm automatically installing postgresql-9.1 on an Ubuntu server with apt-get. This creates the required postgres user. The Postgres data is on an external volume that survives reinstalls. This data is obviously owned by the postgres user. The problem I'm having is that the ownership is not recorded under the name postgres, but under the UID that postgres had at creation time. When the server is reinstalled, postgres sometimes gets a different UID, and no longer owns the data directory, and thus does not work. Question: Can I force the UID of the user postgres created by apt-get to something fixed? Or is there another way to solve my problem? (As you may have deduced, this is on Amazon EC2 with the data on an EBS volume)

  Read the article

• How would I recognize the "spoon-feeding problem" on a dynamic webapp server?

  - by Don Spaulding

  The "spoon-feeding problem", as it was recently explained to me, happens when connections to your application server are tied up feeding data across slow network connections to your clients. This makes sense to me and now I understand the importance of putting a highly-concurrent proxy in front of my app servers. My question is, how did the first person to recognize this problem figure it out? What *nix tools and troubleshooting techniques would help me to recognize this problem if I hadn't had it explained to me?

  Read the article

• df says disk is full, but it is not

  - by Chris

  On a virtualized server running Ubuntu 10.04, df reports the following: # df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 7.4G 7.0G 0 100% / none 498M 160K 498M 1% /dev none 500M 0 500M 0% /dev/shm none 500M 92K 500M 1% /var/run none 500M 0 500M 0% /var/lock none 500M 0 500M 0% /lib/init/rw /dev/sda3 917G 305G 566G 36% /home This is puzzling me for two reasons: 1.) df says that /dev/sda1, mounted at /, has a 7.4 gigabyte capacity, of which only 7.0 gigabytes are in use, yet it reports / being 100 percent full; and 2.) I can create files on / so it clearly does have space left. Possibly relevant is that the directory /www is a symbolic link to /home/www, which is on a different partition (/dev/sda3, mounted at /home). Can anyone offer suggestions on what might be going on here? The server appears to be working without issue, but I want to make sure there's not a problem with the partition table, file systems or something else which might result in implosion (or explosion) later.

  Read the article

• How do I make a Minecraft kiosk for portable USB drive that boots on most computers

  - by user2044589

  Some time ago, someone referred me to a cool website called Rapid Rollout. It worked fine until I tried to install an OS onto a netbook. To put it short, it didn't work as well as I expected it to. It also didn't install USB flash drives. I'm trying to build a system (or use a service that would create a system) that would open up the Minecraft Launcher (jar) and show it in full-screen with no background. It would also all have to fit into 8 Gigabytes (as this is the most that I can use right now). How can I accomplish this?

  Read the article

• How to mount LUKS partition securely on server

  - by Ency

  I'm curious if it is possible to mount a partition encrypted by cryptsetup with LUKS securely and automatically on Ubuntu 10.0.4 LTS. For example, if I use the key for the encrypted partition, than that key has to be presented on a device that is not encrypted and if someone steals my disk they'll be able to find the key and decrypt the partition. Is there any safe way to mount an encrypted partition? If not, does anything exist to do what I want?

  Read the article

< Previous Page | 411 412 413 414 415 416 417 418 419 420 421 422  | Next Page >