Search Results

Search found 43110 results on 1725 pages for 'noob question'.

Page 416/1725 | < Previous Page | 412 413 414 415 416 417 418 419 420 421 422 423  | Next Page >

• Searching the head of CVS

  - by bobtheowl2

  I'm looking for a 'relatively' easy way to search through cvs to look for a particular string in the HEAD revisions. I realize the way CVS stores versions makes this difficult. But I'm trying to come up with some script to allow this search (performance is not expected here). Currently this command will output the contents of the head files cvs co -r HEAD -p stdout = file contents (to be grepped for the search string) stderr = the file name/header info (to be grepped for the line that signifies file name). Ideally, I want to grep the contents and display the header + a few lines before and after the searched item (the output of this likely directed to some file). I found a way to grep the stdout and stderr using different values. And the resulting stdout/stderr displayed is in the right order. But any attempt to redirect it to a file messes up the order? { { cvs co -r HEAD -p myModule 4>&- | grep 'myString' 2>&4 4>&- } 4>&2 2>&1 >&3 3>&- | grep 'Check' >&2 3>&- } 3>&1 Question 1. Is there an easier way to do this all together? Question 2. If not, how do I get the output of the code above to append to a file in the same order as displayed on the console?

  Read the article

• How string accepting interface should look like?

  - by ybungalobill

  Hello, This is a follow up of this question. Suppose I write a C++ interface that accepts or returns a const string. I can use a const char* zero-terminated string: void f(const char* str); // (1) The other way would be to use an std::string: void f(const string& str); // (2) It's also possible to write an overload and accept both: void f(const char* str); // (3) void f(const string& str); Or even a template in conjunction with boost string algorithms: template<class Range> void f(const Range& str); // (4) My thoughts are: (1) is not C++ish and may be less efficient when subsequent operations may need to know the string length. (2) is bad because now f("long very long C string"); invokes a construction of std::string which involves a heap allocation. If f uses that string just to pass it to some low-level interface that expects a C-string (like fopen) then it is just a waste of resources. (3) causes code duplication. Although one f can call the other depending on what is the most efficient implementation. However we can't overload based on return type, like in case of std::exception::what() that returns a const char*. (4) doesn't work with separate compilation and may cause even larger code bloat. Choosing between (1) and (2) based on what's needed by the implementation is, well, leaking an implementation detail to the interface. The question is: what is the preffered way? Is there any single guideline I can follow? What's your experience?

  Read the article

• Is std::move really needed on initialization list of constructor for heavy members passed by value?

  - by PiotrNycz

  Recently I read an example from cppreference.../vector/emplace_back: struct President { std::string name; std::string country; int year; President(std::string p_name, std::string p_country, int p_year) : name(std::move(p_name)), country(std::move(p_country)), year(p_year) { std::cout << "I am being constructed.\n"; } My question: is this std::move really needed? My point is that compiler sees that this p_name is not used in the body of constructor, so, maybe, there is some rule to use move semantics for it by default? That would be really annoying to add std::move on initialization list to every heavy member (like std::string, std::vector). Imagine hundreds of KLOC project written in C++03 - shall we add everywhere this std::move? This question: move-constructor-and-initialization-list answer says: As a golden rule, whenever you take something by rvalue reference, you need to use it inside std::move, and whenever you take something by universal reference (i.e. deduced templated type with &&), you need to use it inside std::forward But I am not sure: passing by value is rather not universal reference?

  Read the article

• Why would one want to use the public constructors on Boolean and similar immutable classes?

  - by Robert J. Walker

  (For the purposes of this question, let us assume that one is intentionally not using auto(un)boxing, either because one is writing pre-Java 1.5 code, or because one feels that autounboxing makes it too easy to create NullPointerExceptions.) Take Boolean, for example. The documentation for the Boolean(boolean) constructor says: Note: It is rarely appropriate to use this constructor. Unless a new instance is required, the static factory valueOf(boolean) is generally a better choice. It is likely to yield significantly better space and time performance. My question is, why would you ever want to get a new instance in the first place? It seems like things would be simpler if constructors like that were private. For example, if they were, you could write this with no danger (even if myBoolean were null): if (myBoolean == Boolean.TRUE) It'd be safe because all true Booleans would be references to Boolean.TRUE and all false Booleans would be references to Boolean.FALSE. But because the constructors are public, someone may have used them, which means that you have to write this instead: if (Boolean.TRUE.equals(myBoolean)) But where it really gets bad is when you want to check two Booleans for equality. Something like this: if (myBooleanA == myBooleanB) ...becomes this: if ( (myBooleanA == null && myBooleanB == null) || (myBooleanA == null && myBooleanA.equals(myBooleanB)) ) I can't think of any reason to have separate instances of these objects which is more compelling than not having to do the nonsense above. What say you?

  Read the article

• Is there an algorithm for finding an item that matches certain properties, like a 20 questions game?

  - by lala

  A question about 20 questions games was asked here: However, if I'm understanding it correctly, the answers seem to assume that each question will go down a hierarchal branching tree. A binary tree should work if the game went like this: Is it an animal? Yes. Is it a mammal? Yes. Is it a feline? Yes. Because feline is an example of a mammal and mammal is an example of an animal. But what if the questions go like this? Is it a mammal? Yes. Is it a predator? Yes. Does it have a long nose? No. You can't branch down a tree with those kinds of questions, because there are plenty of predators that aren't mammals. So you can't have your program just narrow it down to mammal and have predators be a subset of mammals. So is there a way to use a binary search tree that I'm not understanding or is there a different algorithm for this problem?

  Read the article

• ASP.net MVC Linq-To-SQL Extended Class Field Binding

  - by user336858

  Hi there, The short version of this question is "Is there a way to get automatic View Object binding for fields defined in a partial class for a Linq-To-SQL generated class?" Apologies if it's been asked before. Example Suppose I have a typical MVC setup with the tables: Posts {PostID, ...} Categories {CategoryID, ...} A post can have more than one category, and a category can identify more than one post. Thus suppose further that I need an extra table: PostCategories {PostID, CategoryID, ...} This handles the many-to-many relationship between posts and categories. As far as I know, there's no way to do this in Linq-to-SQL right now so I have to shoehorn it in by adding a partial Postclass to the project to add that functionality. Something like: public partial class Post { public IEnumerable<Category> Categories{ get { ... } set { ... } } } So here's my question: If a user is accessing my MVC application front-end and begins editing a Post object, they might enter an invalid category. When the server recognizes the invalid input, the usual practice is to return the faulty object to the original view for re-editing along with some error messages. The fields in the edit page are re-populated with the provided values. However I don't know how to get this mechanism to work with the properties I created with the partial class as shown above. Any terminology, links, or tips you can provide would be tremendously helpful!

  Read the article

• PHP sleep() excution sequence while echoeing.

  - by Babiker

  I have the following: echo time()."<br>"; sleep(1); echo time()."<br>"; sleep(1); echo time()."<br>"; I wrote the preceding code with intention to echo time()."<br>" ln 1,echo time()."<br>" ln 4, wait a final second and then echo the final time()."<br>". Altough the time bieng echoed is correct when it comes to the intervals between time(), all echo functions are echoeing after the total of the waiting period/parameters in each sleep function. This is how the script runs: Excutes. Waits 2 secons. echoes 1275540664 1275540665 1275540666 Notice the correct incrementation in time() being echoed. My question is why is it not behaving like expected to where it echoes, waits a second, echoes again, waits one final second and then echos the last parameter? I know my question is a little confusing due to my wording, but i will try my hardest to answer any comments regarding this, thanks.

  Read the article

• Accessing Instance Variables from NSTimer selector

  - by Timbo

  Firstly newbie question: What's the difference between a selector and a method? Secondly newbie question (who would have thought): I need to loop some code based on instance variables and pause between loops until some condition (of course based on instance variables) is met. I've looked at sleep, I've looked at NSThread. In both discussions working through those options many asked why don't I use NSTimer, so here I am. Ok so it's simple enough to get a method (selector? ) to fire on a schedule. Problem I have is that I don't know how to see instance variables I've set up outside the timer from within the code NSTimer fires. I need to see those variables from the NSTimer selector code as I 1) will be updating their values and 2) will set labels based on those values. Here's some code that shows the concept… eventually I'd invalidate the timers based on myVariable too, however I've excluded that for code clarity. MyClass *aMyClassInstance = [MyClass new]; [aMyClassInstance setMyVariable:0]; [NSTimer scheduledTimerWithTimeInterval:1.0 target:self selector:@selector(doStuff) userInfo:nil repeats:YES]; [NSTimer scheduledTimerWithTimeInterval:5.0 target:self selector:@selector(doSomeOtherStuff) userInfo:nil repeats:YES]; - (void) doStuff { [aMyClassInstance setMyVariable:11]; // don't actually have access to set aMyClassInstance.myVariable [self updateSomeUILabel:[NSNumber numberWithInt:aMyClassInstance.myVariable]]; // don't actually have access to aMyClassInstance.myVariable } - (void) doSomeOtherStuff { [aMyClassInstance setMyVariable:22]; // don't actually have access to set aMyClassInstance.myVariable [self updateSomeUILabel:[NSNumber numberWithInt:aMyClassInstance.myVariable]]; // don't actually have access to aMyClassInstance.myVariable } - (void) updateSomeUILabel:(NSNumber *)arg{ int value = [arg intValue]; someUILabel.text = [NSString stringWithFormat:@"myVariable = %d", value]; // Updates the UI with new instance variable values }

  Read the article

• Creating UTF-8 files in Java from a runnable Jar

  - by RuntimeError

  I have a little Java project where I've set the properties of the class files to UTF-8 (I use a lot of foreign characters not found on the default CP1252). The goal is to create a text file (in Windows) containing a list of items. When running the class files from Eclipse itself (hitting Ctrl+F11) it creates the file flawlessly and opening it in another editor (I'm using Notepad++) I can see the characters as I wanted. +--------------------------------------------------+ ¦ Universidade2010 (18/18)¦ ¦ hidden: 0¦ +--------------------------------------------------¦ But, when I export the project (using Eclipse) as a runnable Jar and run it using 'javaw -jar project.jar' the new file created is a mess of question marks ???????????????????????????????????????????????????? ? Universidade2010 (19/19)? ? hidden: 0? ???????????????????????????????????????????????????? I've followed some tips on how to use UTF-8 (which seems to be broken by default on Java) to try to correct this so now I'm using Writer w = new OutputStreamWriter(fos, "UTF-8"); and writing the BOM header to the file like in this question already answered but still without luck when exporting to Jar Am I missing some property or command-line command so Java knows I want to create UTF-8 files by default ?

  Read the article

• OSGi bundle imports packages from non-bundle jars: create bundles for them?

  - by John Simmons

  I am new to OSGi, and am using Equinox. I have done several searches and can find no answer to this. The discussion at OSGI - handling 3rd party JARs required by a bundle helps somewhat, but does not fully answer my question. I have obtained a jar file, rabbitmq-client.jar, that is already packaged as an OSGi bundle (with Bundle-Name and other such properties in its MANIFEST.MF), that I would like to install as a bundle. This jar imports packages org.apache.commons.io and org.apache.commons.io.input from commons-io-1.2.jar. The RabbitMQ client 2.7.1 distribution also includes commons-cli-1.1.jar, so I presume that it is required as well. I examined the manifests of these commons jars and found that they do not appear to be packaged as bundles. That is, their manifests have none of the standard bundle properties. My specific question is: if I install rabbitmq-client.jar as a bundle, what is the proper way to get access to the packages that it needs to import from the commons jars? There are only three alternatives that I can think of, without rebuilding rabbitmq-client.jar. The packages from the commons jars are already included in the Equinox global classpath, and rabbitmq-client.jar will get them automatically from there. I must make another bundle with the two commons jars, export the needed packages, and install that bundle in Equinox. I must put these two commons jars in the global classpath when I start Equinox, and they will be available to rabbitmq-client.jar from there. I have read that one normally does not use the global classpath in an OSGi container. I am not clear on whether items from the global classpath are even available when building individual bundle classpaths. However, I note that rabbitmq-client.jar also imports other packages such as javax.net, which I presume come from the global classpath. Or is there some other bundle that exports them? Thanks for any assistance!

  Read the article

• Methods to see result fo a code change faster

  - by Can't Tell

  This question came to me when developing using Eclipse. I use JBoss Application Server and use hot code replacement. But this option requires that the 'build automatically' option to be enabled. This makes Eclipse build the workspace automatically (periodically or when a file is saved?) and for a large code base this takes too much time and processing which makes the machine freeze for a while. Also sometimes an error message is shown saying that hot code replacement failed. The question that I have is: is there a better way to see the result of a code change? Currently I have the following two suggestions: Have unit tests - this will allow to run a single test and see the result of a code change. ( But for a JavaEE application that uses EJBs is it easy to setup unit tests?) Use OSGi - which allows to add jars to the running system without bringing down the JVM. Any ideas on above suggestions or any other suggestion or a framework that allows to do this is welcome.

  Read the article

• Alternate colors on click with jQuery

  - by Jace Cotton

  I'm sure there is a simple solution to this, and I'm sure this is a duplicate question, though I have been unable to solve my solution particularly because I don't really know how to phrase it in order to search for other questions/solutions, so I'm coming here hoping for some help. Basically, I have spans with classes that assigns a background-color property, and inside those spans are words. I have three of these spans, and each time a user clicks on a span I want the class to change (thus changing the background color and inner text). HTML: <span class="alternate"> <span class="blue showing">Lorem</span> <span class="green">Ipsum</span> <span class="red">Dolor</span> </span> CSS: .alternate span { display : none } .alternate .showing { display : inline } .blue { background : blue } .green { background : green } .red { background : red } jQuery: $(".alternate span").each(function() { $(this).on("click", function() { $(this).removeClass("showing"); $(this).next().addClass("showing"); }); }); This solution works great using $.next until I get to the third click, whereafter .showing is removed, and is not added since there are no more $.next options. How do I, after getting to the last-child, add .showing to the first-child and then start over? I have tried various options including if($(".alternate span:last-child").hasClass("showing")) { etc. etc. }, and I attempted to use an array and for loop though I failed to make it work. Newb question, I know, but I can't seem to solve this so as a last resort I'm coming here.

  Read the article

• How do I efficiently parse a CSV file in Perl?

  - by Mike

  I'm working on a project that involves parsing a large csv formatted file in Perl and am looking to make things more efficient. My approach has been to split() the file by lines first, and then split() each line again by commas to get the fields. But this suboptimal since at least two passes on the data are required. (once to split by lines, then once again for each line). This is a very large file, so cutting processing in half would be a significant improvement to the entire application. My question is, what is the most time efficient means of parsing a large CSV file using only built in tools? note: Each line has a varying number of tokens, so we can't just ignore lines and split by commas only. Also we can assume fields will contain only alphanumeric ascii data (no special characters or other tricks). Also, i don't want to get into parallel processing, although it might work effectively. edit It can only involve built-in tools that ship with Perl 5.8. For bureaucratic reasons, I cannot use any third party modules (even if hosted on cpan) another edit Let's assume that our solution is only allowed to deal with the file data once it is entirely loaded into memory. yet another edit I just grasped how stupid this question is. Sorry for wasting your time. Voting to close.

  Read the article

• Determine asymmetric latencies in a network

  - by BeeOnRope

  Imagine you have many clustered servers, across many hosts, in a heterogeneous network environment, such that the connections between servers may have wildly varying latencies and bandwidth. You want to build a map of the connections between servers my transferring data between them. Of course, this map may become stale over time as the network topology changes - but lets ignore those complexities for now and assume the network is relatively static. Given the latencies between nodes in this host graph, calculating the bandwidth is a relative simply timing exercise. I'm having more difficulty with the latencies - however. To get round-trip time, it is a simple matter of timing a return-trip ping from the local host to a remote host - both timing events (start, stop) occur on the local host. What if I want one-way times under the assumption that the latency is not equal in both directions? Assuming that the clocks on the various hosts are not precisely synchronized (at least that their error is of the the same magnitude as the latencies involved) - how can I calculate the one-way latency? In a related question - is this asymmetric latency (where a link is quicker in direction than the other) common in practice? For what reasons/hardware configurations? Certainly I'm aware of asymmetric bandwidth scenarios, especially on last-mile consumer links such as DSL and Cable, but I'm not so sure about latency. Added: After considering the comment below, the second portion of the question is probably better off on serverfault.

  Read the article

• Phonegap: Will my mobile app 'feel' faster or slower once ported to phonegap?

  - by user15872

  So I'm designing everything in mobile Safari and I know that phonegap is essentially a stripped webview but... Question: Will my application will run better in phonegap? (revised below) a)I imagine my navigation and core app will load faster as the scripts and images are on the hard drive. Is this True? b)I assume since they've been working on it for 2 years now that they may have made some optimizations to make it quicker than just an average safari window. Is this true? (Assuming both html5/js/css code bases are pretty much the same and app is running on iOS.) Update: Sorry, I meant to compare apples to slightly different apples. Question 1 revised: Will my app see any performance benefits running with in a phonegap environment vs standard mobile safari? (compare mobile - to mobile) 1b) In what ways, other than loading time has phonegap optimized performance over standard mobile safari? Follow ups: 1) Are there any pitfalls, other than large libraries, that may cause phonegap to suffer a serious performance hit vs stand mobile safari? 2) Can I mix native and webview rendering? (i.e the top half of my app is rendered in with html/css/js and the bottom half native)

  Read the article

• Newbie - eclipse workflow (PHP development)

  - by engil

  Hi all - this is a bit of a newbie question but hoping I can get some guidance. I've been playing around with Eclipse for a couple months yet I'm still not completely comfortable with my setup and it seems like every time I install it to a new system I end up with different results. What I'm hoping to achieve is (I think) fairly standard. In my environment I'd like SVN (currently using Subclipse), FTP support (currently using Aptana plugin), debugging (going to use XDebug) and all the usual bells and whistles of development (code completion, refactoring, etc.) My biggest current issue is how to set up my environment to support both a 'development' and 'production' server. Optimally I would be able to work directly against the dev server (Eclipse on my Vista desktop against the VM Ubuntu dev server) and then push to production server (shared hosting). I'd prefer to work directly against the dev server (with no local project files, just using the Connections provided by Aptana) but I'm guessing this won't allow for code-completoin or all the other bells and whistles provided for development. Any thoughts? Kind of an open ended question, but maybe this could be an opportunity for some of you with a great deal of experience using Eclipse to describe your setups so people like me can get some insight into good ways to get set up.

  Read the article

• Passing user_id, site_id, and question_id to same table on create...

  - by bgadoci

  I can't seem to figure out how to do this. I am trying to pass four different variables to a single table. To be more specific I am trying to create a "like" in a likes table that also captures the site_id (like an answer), user_id, and the question_id. Here is the set up. class Like < ActiveRecord::Base belongs_to :site belongs_to :user belongs_to :question end I will spare you the reverse, has_many associations but they are there. Here is the likes controller where I think the problem is. class LikesController < ApplicationController def create @user = current_user @site = Site.find(params[:site_id]) @like = @site.likes.create!(params[:like]) @like.user = current_user @like.save respond_to do |format| format.html { redirect_to @site} format.js end end end This code successfully passes the like and site_id but after many different variations of trying I can't get it to pass the question id. Here is my form: /views/sites/_site.html.erb (though the partial is being displayed in the /views/questions/show.html.erb file). <% remote_form_for [site, Like.new] do |f| %> <%= f.hidden_field :site_name, :value => "#{site.name}" %> <%= f.hidden_field :ip_address, :value => "#{request.remote_ip}" %> <%= f.hidden_field :like, :value => "1" %> <%= submit_tag "^" , :class => 'voteup' %> <% end %>

  Read the article

• Port Java Application to Android

  - by mihirk

  I am not so sure about the question or what I should call what I am trying to achieve. I use a dialer called super sify. Here is the download - http://thegoan.com/supersify/supersify.zip The when extracted it has two files for linux, one is a .jar file which consists of some classes. The application was written in java. The other is a .sh file, which is a shell executable and takes some parameters like username and password and machine id and stuff. I want to port this app to android. What exactly would I have to do. Some more information is the .jar file is named supersify.jar and the .sh file is named ss.sh so here is the code for ss.sh java -jar supersify.jar $* if [ $? -eq 1 ] then read fi Please help me out. This is an open source software.So I am not doing any illegal modifications. I need to port this app to android, so would I have to write the whole thing again or just something else. I know some basic hello world android app development, and I have made an app to add two numbers, I am still on my way to become an android app developer, but I need this app and will learn a lot to make this possible unless it involves rewriting all the java classes. Thank you in advance If you have anymore question I will be glad to answer to them :D.

  Read the article

• Arrays not counting correctly

  - by Nick Gibson

  I know I was just asking a question earlier facepalm This is in Java coding by the way. Well after everyones VERY VERY helpful advice (thank you guys alot) I managed to get over half of the program running how I wanted. Everything is pointing in the arrays where I want them to go. Now I just need to access the arrays so that It prints the correct information randomly. This is the current code that im using: http://pastebin.org/301483 The specific code giving me problems is this: long aa; int abc; for (int i = 0; i < x; i++) { aa = Math.round(Math.random()*10); String str = Long.toString(aa); abc = Integer.parseInt(str); String[] userAnswer = new String[x]; if(abc > x) { JOptionPane.showMessageDialog(null,"Number is too high. \nNumber Generator will reset."); break; } userAnswer[i] = JOptionPane.showInputDialog(null,"Question "+quesNum+"\n"+questions[abc]+"\n\nA: "+a[abc]+"\nB: "+b[abc]+"\nC: "+c[abc]+"\nD: "+d[abc]); answer = userAnswer[i].compareTo(answers[i]); if(answer == 0) { JOptionPane.showMessageDialog(null,"Correct. \nThe Correct Answer is "+answers[abc]+""+i); } else { JOptionPane.showMessageDialog(null,"Wrong. \n The Correct Answer is "+answers[abc]+""+i); }//else

  Read the article

• How to close and open access to SQL Server 2008 in Windows application?

  - by hgulyan

  Hi, I have a MS Access 97 application (but the question is general) working directly with SQL Server 2008 (without application server or anything). Numbers of users can be up to 1000. Windows Authentication is used. The question is: How to handle modes, so some users will be allowed to work in read-only mode some users won't have access to db for some time My versions: Using a table with a mode id for every group of users, that will work the same way. On Form Load application will query that table for mode id. Using trigger on the tables, that must work according to that mode. The trigger will query mode value and doesn't work if access is closed or it's in read-only mode I know these are not the best solutions, that's why I'm asking for your advice. There's one more point. If the mode is changed to "access-is-closed" for a group of users, that group must not be able to query to DB starting that moment. With first solution I wrote it won't work, because user can be in application at that moment and no form load event will work. How can I do this? Is there any optimal solution? Thank you. Any help would be appreciated.

  Read the article

• Are we in demand?

  - by dotnetdev

  I was made redundant in the end of November. This wasn't because I lacked required skills (although I'm a youngster and in career levels a junior dev - though I knew a lot more than was called for in my job). Anyway, I was laid off due to the whole recession/credit crunch thing going on. I worked for a small company and money got tight and I had to go. I haven't made a thread about this but I have seen threads about others being laid off and experiencing a similar fate. This leads me to the question: What is the job market like for developers? Are we in demand? I ask this question on a global level, but I live in London UK (in case anyone comes across this thread from the same area). I am a .NET dev but my secondary skillset is Flex (actionscript too) and Java, which my personal portfolio is made with. I hope to be strong enough in this to do this commercially, with a few more months of practise. Then I will have more jobs applicable to me. Unfortunately, I use agencies and sites like Jobserve/Monster.com but no new jobs are ever posted on there so when you apply to all the relevant jobs, then what? Whatsmore, a lot of companies are putting a freeze on recruitment. Thanks

  Read the article

• Cocoa Drag and Drop, reading back the data. [Newbie]

  - by kodai

  Ok, I have a NSOutlineView set up, and I want it to capture PDF's if a pdf is dragged into the NSOutlineView. My first question, I have the following code: [outlineView registerForDraggedTypes:[NSArray arrayWithObjects:NSStringPboardType, NSFilenamesPboardType, nil]]; In all the apple Docs and examples I've seen I've also seen something like MySupportedType being an object registered for dragging. What does this mean? Do I change the code to be: [outlineView registerForDraggedTypes:[NSArray arrayWithObjects:@"pdf", NSStringPboardType, NSFilenamesPboardType, nil]]; Currently I have it set up to recognize drag and drop, and I can even make it spit out the URL of the dragged file once the drag is accepted, however, this leads me to my second question. I want to keep a copy of those PDF's app side. I suppose, and correct me if I'm wrong, that the best way to do this is to grab the data off the clipboard, save it in some persistant store, and that's that. (as apposed to using some sort of copy command and literally copying the file to the app director.) That being said, I'm not sure how to do that. I've the code: - (BOOL)outlineView:(NSOutlineView *)ov acceptDrop:(id <NSDraggingInfo>)info item:(id)item childIndex:(NSInteger)childIndex { NSPasteboard *pboard = [info draggingPasteboard]; NSURL *fileURL; if ( [[pboard types] containsObject:NSURLPboardType] ) { fileURL = [NSURL URLFromPasteboard:pboard]; // Perform operation using the file’s URL } NSData *data = [pboard dataForType:@"NSPasteboardTypePDF"]; But this never actually gets any data. Like I said before, it does get the URL, just not the data. Does anyone have any advise on how to get this going? Thanks so much!

  Read the article

• How to retrieve content via .load() or $.get() with this line

  - by Sin

  hello :) I posted a question a day or two ago about how to retrieve php via ajax method in this modal I was using. I kinda found out the right way to go about it, but there's still something I'm not doing right (obviously lol) Here's the section thats giving me the issues: jQuery('div that holds content').fadeIn(200).css({ 'width': Number( popWidth ) }); $('').load('/something/somewhere/this #content'); So, im using safari, and a local server (mamp), when I check activity in my browser, it shows that it is loading the content with every click, AND the pop up pops up, but no content. When I simply retrieve content via hidden div, ofcourse, i get it. This is what I'm trying to avoid. right now I have that div in my footer stashed as hidden. I'd rather just make a call when its needed, instead of loading it every single time a page is accessed. you can go here to see the whole script i posted in my last question: How to use ajax to show php in a modal pop up Anyone have any idea? I read that .load() has the ability to grab specific content from a request, but im not sure the major difference between that and $.get() I've tried both, and I get the same results. Im using wordpress, and wordpress's ajax requests run smooth as ever, so I know its not a local problem, i'ts my coding lol Ok....Im done typing :)

  Read the article

• What is the correct install process to setup Node.js with Windows Azure Emulator

  - by PazoozaTest Pazman

  This question is related to this question: Node.js running under IIS Express Keeps Crashing to which I need help with reinstalling and getting node.js up and running in windows emulator working. Hello I am reinstalling my machine: Toshiha Laptop 2 GB Ram 32 bit processor What is the correct procedure from start to finish to get node.js development working, so far nothing has worked and the emulator (IIS Express) worker processor keeps crashing. No matter how many instances they all end up crashing. Up until two weeks ago my node development was working fine, but I had to do a reinstall, and since then I haven't been doing any node.js development on windows emulator because the latest June 2012 Azure SDK for Node.js is buggy. These are the steps I have taken: 1) Reformat HD 2) Insert Windows 7 N SP1 CD 3) Reboot machine into CD installation 4) Follow and wait until Windows 7 installed 5) Run Add/Remove programs + enable IIS + IIS management tools 6) Run Windows Update (installed about 53 updates) 7) Go here http://www.windowsazure.com/en-us/develop/nodejs/ 8) Click Windows Installer June 2012 and install Windows Azure SDK for Node.js - June 2012 9) Run Azure Powershell 10) Navigate to c:\node\testSite\webrole1 11) launch site: start-azureemulator -launch 12) Play around on website (then crash!) Problem signature: Problem Event Name: APPCRASH Application Name: iisexpress.exe Application Version: 8.0.8298.0 Application Timestamp: 4f620349 Fault Module Name: iiscore.dll Fault Module Version: 8.0.8298.0 Fault Module Timestamp: 4f63b65c Exception Code: c0000005 Exception Offset: 00021767 OS Version: 6.1.7601.2.1.0.256.28 Locale ID: 1033 Additional Information 1: f66d Additional Information 2: f66d807b515d6b2dc6f28f66db769a01 Additional Information 3: 7b2f Additional Information 4: 7b2f6797d07ebc2c23f2b227e779722e Am I missing a step in my resintall process? Do I have all the required files to do node.js windows azure emulator development? Why is IIS Express crashing all the time? Can I still do node.js windows azure emulator development without using IIS Express and use my local Windows 7 N (SP1) IIS 7.x that comes shipped?

  Read the article

• [IE6] Cannot upload non-existent file

  - by geff_chang

  I am asking the same question as this: http://stackoverflow.com/questions/691323/trying-to-upload-a-non-existent-file-in-internet-explorer-form-is-not-submitted I'm not sure if the topic starter found a solution, since he did not post the answer. So, I'd like to ask you guys this question again. I have type=input in my form, and a submit button. If I type garbage input into the textbox (like the text "abc") in the file control's textbox, and click the submit button, the form is not submitted to the server. AND, no feedback is given to the user. Instead of this "Is-the-submit-button-broken?" behavior, is there a way I could notify the user that the file does not exist? (I am aware this is not possible, except with ActiveX, but I don't want to go into that) My client wants to hide the textbox of the file control, but I'm not sure if this is a good design. What do you guys suggest? (If it makes any difference, I am also using this jquery plugin: http://www.fyneworks.com/jquery/multiple-file-upload/)

  Read the article

< Previous Page | 412 413 414 415 416 417 418 419 420 421 422 423  | Next Page >