Search Results

Search found 30087 results on 1204 pages for 'default package'.

Page 417/1204 | < Previous Page | 413 414 415 416 417 418 419 420 421 422 423 424  | Next Page >

  • Cisco ASA 5505 - L2TP over IPsec

    - by xraminx
    I have followed this document on cisco site to set up the L2TP over IPsec connection. When I try to establish a VPN to ASA 5505 from my Windows XP, after I click on "connect" button, the "Connecting ...." dialog box appears and after a while I get this error message: Error 800: Unable to establish VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. ASA version 7.2(4) ASDM version 5.2(4) Windows XP SP3 Windows XP and ASA 5505 are on the same LAN for test purposes. Edit 1: There are two VLANs defined on the cisco device (the standard setup on cisco ASA5505). - port 0 is on VLAN2, outside; - and ports 1 to 7 on VLAN1, inside. I run a cable from my linksys home router (10.50.10.1) to the cisco ASA5505 router on port 0 (outside). Port 0 have IP 192.168.1.1 used internally by cisco and I have also assigned the external IP 10.50.10.206 to port 0 (outside). I run a cable from Windows XP to Cisco router on port 1 (inside). Port 1 is assigned an IP from Cisco router 192.168.1.2. The Windows XP is also connected to my linksys home router via wireless (10.50.10.141). Edit 2: When I try to establish vpn, the Cisco device real time Log viewer shows 7 entries like this: Severity:5 Date:Sep 15 2009 Time: 14:51:29 SyslogID: 713904 Destination IP = 10.50.10.141, Decription: No crypto map bound to interface... dropping pkt Edit 3: This is the setup on the router right now. Result of the command: "show run" : Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name default.domain.invalid enable password HGFHGFGHFHGHGFHGF encrypted passwd NMMNMNMNMNMNMN encrypted names name 192.168.1.200 WebServer1 name 10.50.10.206 external-ip-address ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address external-ip-address 255.0.0.0 ! interface Vlan3 no nameif security-level 50 no ip address ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name default.domain.invalid object-group service l2tp udp port-object eq 1701 access-list outside_access_in remark Allow incoming tcp/http access-list outside_access_in extended permit tcp any host WebServer1 eq www access-list outside_access_in extended permit udp any any eq 1701 access-list inside_nat0_outbound extended permit ip any 192.168.1.208 255.255.255.240 access-list inside_cryptomap_1 extended permit ip interface outside interface inside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool PPTP-VPN 192.168.1.210-192.168.1.220 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www WebServer1 www netmask 255.255.255.255 access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport crypto map outside_map 1 match address inside_cryptomap_1 crypto map outside_map 1 set transform-set TRANS_ESP_3DES_MD5 crypto map outside_map interface inside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd enable inside ! group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.1.1 vpn-tunnel-protocol IPSec l2tp-ipsec username myusername password FGHFGHFHGFHGFGFHF nt-encrypted tunnel-group DefaultRAGroup general-attributes address-pool PPTP-VPN default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! ! prompt hostname context Cryptochecksum:a9331e84064f27e6220a8667bf5076c1 : end

    Read the article

  • CodePlex Daily Summary for Sunday, August 12, 2012

    CodePlex Daily Summary for Sunday, August 12, 2012Popular ReleasesThisismyusername's codeplex page.: Run! Thunderstorm! Classic Multiplatform: The classic edition now on any device, you don't have to get the touch edition for touch screens!SharePoint Developers & Admins: SPTaxCleaner Tool - Cleaner Taxonomy Data: For more information on the tool and how to use it: SPTaxCleaner Run the tool at your own risk!BugNET Issue Tracker: BugNET 1.1: This release includes bug fixes from the 1.0 release for email notifications, RSS feeds, and several other issues. Please see the change log for a full list of changes. http://support.bugnetproject.com/Projects/ReleaseNotes.aspx?pid=1&m=76 Upgrade Notes The following changes to the web.config in the profile section have occurred: Removed <add name="NotificationTypes" type="String" defaultValue="Email" customProviderData="NotificationTypes;nvarchar;255" />Added <add name="ReceiveEmailNotifi...Virtual Keyboard: Virtual Keyboard v2.0 Source Code: This release has a few added keys that were missing in the earlier versions.????: ????2.0.5: 1、?????????????。RiP-Ripper & PG-Ripper: PG-Ripper 1.4.01: changes NEW: Added Support for Clipboard Function in Mono Version NEW: Added Support for "ImgBox.com" links FIXED: "PixHub.eu" links FIXED: "ImgChili.com" links FIXED: Kitty-Kats Forum loginPlayer Framework by Microsoft: Player Framework for Windows 8 (Preview 5): Support for Smooth Streaming SDK beta 2 Support for live playback New bitrate meter and SD/HD indicators Auto smooth streaming track restriction for snapped mode to conserve bandwidth New "Go Live" button and SeekToLive API Support for offset start times Support for Live position unique from end time Support for multiple audio streams (smooth and progressive content) Improved intellisense in JS version Support for Windows 8 RTM ADDITIONAL DOWNLOADSSmooth Streaming Client SD...Media Companion: Media Companion 3.506b: This release includes an update to the XBMC scrapers, for those who prefer to use this method. There were a number of behind-the-scene tweaks to make Media Companion compatible with the new TMDb-V3 API, so it was considered important to get it out to the users to try it out. Please report back any important issues you might find. For this reason, unless you use the XBMC scrapers, there probably isn't any real necessity to download this one! The only other minor change was one to allow the mc...Avian Mortality Detection Entry Application: Detection Entry: The most recent and up-to-date version of the Detection Entry application. Please click on the CLICKONCE link above to install.NVorbis: NVorbis v0.3: Fix Ogg page reader to correctly handle "split" packets Fix "zero-energy" packet handling Fix packet reader to always merge packets when needed Add statistics properties to VorbisReader.Stats Add multi-stream API (for Ogg files containing multiple Vorbis streams)The Ftp Library - Most simple, full-featured .NET Ftp Library: TheFtpLibrary v1.0: First version. Please report any bug and discuss how to improve this library in 'Discussion' section.VisioAutomation: Visio Power Tools 2010 (Beta): Visio Power Tools 2010 An Add-in for Visio 2010. In Beta but should be very stable. Some Cool Features Import Colors - From Kuler, ColourLovers, or manually enter RGB values Create a Document containing images of all masters in multiple stencils Toggle text case Copy All text from all shapes Export document to XHTML (with embedded SVG) Export document to XAML Updates2012-08-10 - Fixed path handling when generating the HTML stencil catalogXBMC for LCDSmartie: v 0.7.1: Changes: Version 0.7.1 - Removed unused configuration options: You can remove the user and pass section from your LCDSmartie.exe.config Version 0.7.0 - Changed JSON-Protocol to TCP: This means the plugin will run much faster and chances that LCDSmartie will stutter are minimized Note: You will have to change some settings in your LCDSmartie.exe.config, as TCP uses a different port than HTTP (9090 is default in XBMC)WPF RSS Feed Reader: WPF RSS Feed Reader 4.1: WPF RSS Feed Reader 4.1.x This application has been developed using Visual Studio 2010 with .NET 4.0 and Microsoft Expression Blend. It makes use of the MVVM Light Toolkit, more information can be found here Fixed bug when first installed - handle null reference on _proxySetting Fixed bug if trying to open error log but error log doesn't exist yet Added strings to resources Moved AsssemblyInfo centrally and linked to other projectsScutex: Scutex 4th Preview Release 0.4: This is the fourth preview release for the new Scutex 0.4 Beta. This preview release is unstable and contains some UI issues that are being worked on due to an installation of a brand new GUI. The stable version of the 0.4 Beta will be out shortly as soon as this release passes QA. The following were fixed in this release *Fixed an issue with the Upload Product dialog that would cause it to throw an exception. Known Issues *The download service logs grid does not display properlySystem.Net.FtpClient: System.Net.FtpClient 2012.08.08: 2012.08.08 Release. Several changes, see commit notes in source code section. CHM help as well as source for this release are included in the download. Remember that Windows 7 by default (and possibly older versions) will block you from opening the CHM by default due to trust settings. To get around the problem, right click on the CHM, choose properties and click the Un-block button. Please note that this will be the last release tested to compile with the .net 2.0 framework. I will be remov...Isis2 Cloud Computing Library: Isis2 Alpha V1.1.967: This is an alpha pre-release of the August 2012 version of the system. I've been testing and fixing many problems and have also added a new group "lock" API (g.Lock("lock name")/g.Unlock/g.Holder/g.SetLockPolicy); with this, Isis2 can mimic Chubby, Google's locking service. I wouldn't say that the system is entirely stable yet, and I haven't rechecked every single problem I had seen in May/June, but I think it might be good to get some additional use of this release. By now it does seem to...JSON C# Class Generator: JSON CSharp Class Generator 1.3: Support for native JSON.net serializer/deserializer (POCO) New classes layout option: nested classes Better handling of secondary classesAxiom 3D Rendering Engine: v0.8.3376.12322: Changes Since v0.8.3102.12095 ===================================================================== Updated ndoc3 binaries to fix bug Added uninstall.ps1 to nuspec packages fixed revision component in version numbering Fixed sln referencing VS 11 Updated OpenTK Assemblies Added CultureInvarient to numeric parsing Added First Visual Studio 2010 Project Template (DirectX9) Updated SharpInputSystem Assemblies Backported fix for OpenGL Auto-created window not responding to input Fixed freeInterna...DotSpatial: DotSpatial 1.3: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Tutorials are available. Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components ...New ProjectsAppFabric Cache Admin Tool: Appfabric Admin tool is a GUI tool provided for Cache Administration. This tool can be used for both Appfabric 1.0 and 1.1 versions.Bootstrap XML Navigation: Bootstrap XML Navigation is an ASP.NET Server Control which provide the ability to off-load your Bootstrap navigation structure to external XML files.Classic MVC: Classic MVC is an MVC framework written entirely in JScript for Microsoft's Classic ASP. Separation of concerns, controllers, partial views and more.Component Spectrum: Component Spectrum is an E-Commerce Application project.Developments in Java: Free Develop JavaDongGPrj: DongGPrjEsShop: ???????,????。。。F# Indent Visual Studio addon: The addon to show how to use SmartIndent and change the indent behavior in F# content.FizzBuzzAssignment: This is HeadSpring assignment.hotfighter: a act game!!!iSoilHotel: It is a hotel management system that using Microsoft N-Layer Architecture as the primary thoughts.KVBL (K's VB6 library) VB6????,????????.: KVBL??VB6??????、???????,????????,??????,????VB????,??????????。????:??????、???、??、????、??、????、??、??、?????、?????、???????,???????……Meteorite: c# game 3d wp7 space ship meteoriteMetro App Helpers: Helper classes for building Metro style app on Windows 8.MobileShop: Mobile shop for Iphone & AndroidMomentum: this is q project pqrticipqtion between meir and david concerning student university project on physics.OneLine: dfgfdgPreflight: Summary HereResilient FileSystemWatcher for monitoring network folders: Drop in replacement for FileSystemWatcher that works for network folders and compensate for network outages, server restarts ect.SkyPoint: A Windows Phone 7 app aimed at novice astronomers.test20120811: summary of this projectVS Unbind Source Control: Remove Source Control bindings from Visual Studio Solution and Project FilesWcf SWA (SFTI) implementation: First releasewebstart: new web tech testwinform_framework: winform_frameworkwtopenapi: wtopen sina weibo sdk txweibosdk qzone sdk

    Read the article

  • XFCE ~ Volume Hot Keys Not Working

    - by fleamour
    Just installed vanilla Xubuntu 12.04 LTS & updated on a ThinkPad E325 with Conexant CX20671 sound card. I notice volume hot keys work under Xubuntu DE but not XFCE. You can summon sound settings under Xubuntu but they are missing under XFCE. Also sound bar is greyed out though sound will still function. Muting/decreasing/increasing volume with hot keys has no effect. Is there a workaround? If not what package would I report a bug against?

    Read the article

  • Download Speed is 0.12 Mbps when tested with servers in U.S, but it is 0.76 Mbps when tested with local servers, normal? [closed]

    - by Graviton
    Feeling that my ISP is cheating my money ( My subscription package is 1 Mbps), I did a speed test on my internet connection using www.speedtest.net. I tried to test the connection speed on two servers, one local ( Malaysia), another in U.S. I found that while the upload speed remain constant, but the download speed is different; 0.76 Mbps for servers in Malaysia, and 0.12 Mbps for servers in U.S. I called the ISP, and they blamed it on the intercontinental signal lost. But how can it be that the speed differs by that much? If it really differs by that much than we should always take a grain of salt of what is advertised as the broadband speed because the advertised speed is not the speed we are getting. No?

    Read the article

  • DotNetNuke 5.3.1 Released

    I am happy to announce that the DotNetNuke 5.3.1 release is now available for download. This release was focused on fixing 3 significant issues with the 5.3.0 release which caused us to remove the release from CodePlex and our DotNetNuke Support Network. It is never easy to admit that significant issues slipped through testing and made it into a release package forcing you to take drastic actions. The only thing we can do is to re-evaluate our processes and continue to find areas for improvement...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Why can't I upgrade my kernel via the terminal?

    - by Alvar
    If I type sudo apt-get update && sudo apt-get upgrade I can only see that the kernel packages are kept back, and not installed. As the screenshot shows. If I then start the update manager I can install the kernel, with no problems at all. As the second screenshot shows. Why is this? The kernel is a new package and not an upgrade of an old one, this is why you can't use the command upgrade that upgrades packages. You need to use the command dist-upgrade to install new packages.

    Read the article

  • Blu-ray player?

    - by Dox
    I'd like to play bluray discs in my laptop. I found the official documentation, and there it's explained that one should use mplayer and ffmpeg. Looking at the repositories, there exist two different mplayer packages (in conflict with each other) mplayer mplayer2 Any ideas with of them should I install? On the other hand the official documentation seems to be out of date since no mention to Ubuntu after 9.04 is done. Does the DumpHD package from the repositories work? Finally, Where could the keydb.cfg keys be found? I'm open to suggestions, specially of people who had done the job of making it work. Cheers

    Read the article

  • CodePlex Daily Summary for Wednesday, August 15, 2012

    CodePlex Daily Summary for Wednesday, August 15, 2012Popular ReleasesTFS Workbench: TFS Workbench v2.2.0.10: Compiled installers for TFS Workbench 2.2.0.10 Bug Fix Fixed bug that stopped the change workspace action from working.MoltenMercury: MoltenMercury 1.0 beta 1: This is initial implementation of the MoltenMercury with everything running but not throughoutly tested. Release contains a zip file with program binaries and a zip file containing resources. Before using please create a new directory named data in the same directory with program executables and extract DefaultCharacter zip file in there. If you have ???????????, you can simply place executables into the same directory with the program mentioned above. MoltenMercury supports character resour...SharePoint Column & View Permission: SharePoint Column and View Permission v1.0: Version 1.0 of this project. If you will find any bugs please let me know at enti@zoznam.sk or post your findings in Issue TrackerSPListViewFilter: Version 1.6: Layout selection: http://blog.vitalyzhukov.ru/imagelibrary/120815/Settings_Layouts.pngConsoleHoster: ConsoleHoster Version 1.2: Cleanup some logging UI impreovements: Fixed the bug with _ character in project-name Fixed the bug with tab close button to be X style Fixed the style of search content bar Fixed the bug with disappearing Edit project window Moved the Clear History button to the taskbar and added also a menu item Changed the QC button to CH Applied project colors to tab headersMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.60: Allow for CSS3 grid-column and grid-row repeat syntax. Provide option for -analyze scope-report output to be in XML for easier programmatic processing; also allow for report to be saved to a separate output file.Diablo III Drop Statistics Service: 1.0: Client OnlyClosedXML - The easy way to OpenXML: ClosedXML 0.67.2: v0.67.2 Fix when copying conditional formats with relative formulas v0.67.1 Misc fixes to the conditional formats v0.67.0 Conditional formats now accept formulas. Major performance improvement when opening files with merged ranges. Misc fixes.Umbraco CMS: Umbraco 4.8.1: Whats newBug fixes: Fixed: When upgrading to 4.8.0, the database upgrade didn't run Update: unfortunately, upgrading with SQLCE is problematic, there's a workaround here: http://bit.ly/TEmMJN The changes to the <imaging> section in umbracoSettings.config caused errors when you didn't apply them during the upgrade. Defaults will now be used if any keys are missing Scheduled unpublishes now only unpublishes nodes set to published rather than newest Work item: 30937 - Fixed problem with Fi...MySqlBackup.NET - MySQL Backup Solution for C#, VB.NET, ASP.NET: MySqlBackup.NET 1.4.4 Beta: MySqlBackup.NET 1.4.4 beta Fix bug: If the target database's default character set is not UTF8, UTF8 character will be encoded wrongly during Import. Now, database default character set will be recorded into Dump File at line of "SET NAMES". During import(restore), MySqlBackup will again detect and use the target database default character char set. MySqlBackup.NET 1.4.2 beta Fix bug: MySqlConnection is not closed when AutoCloseConnection set to true after Export or Import completed/halted. M...patterns & practices - Unity: Unity 3.0 for .NET 4.5 and WinRT - Preview: The Unity 3.0.1208.0 Preview enables Unity to work on .NET 4.5 with both the WinRT and desktop profiles. This is an updated version of the port after the .NET Framework 4.5 and Windows 8 have RTM'ed. Please see the Release Notes Providing feedback Post your feedback on the Unity forum Submit and vote on new features for Unity on our Uservoice site.LiteBlog (MVC): LiteBlog 1.31: Features of this release Windows8 styled UI Namespace and code refactoring Resolved the deployment issues in the previous release Added documentation Help file Help file is HTML based built using SandCastle Help file works in all browsers except IE10Self-Tracking Entity Generator for WPF and Silverlight: Self-Tracking Entity Generator v 2.0.0 for VS11: Self-Tracking Entity Generator for WPF and Silverlight v 2.0.0 for Entity Framework 5.0 and Visual Studio 2012Coding4Fun Tools: Coding4Fun.Phone.Toolkit v1.6.0: New Stuff ImageTile Control - think People Tile MicrophoneRecorder - Coding4Fun.Phone.Audio GzipWebClient - Coding4Fun.Phone.Net Serialize - Coding4Fun.Phone.Storage this is code I've written countless times. JSON.net is another alternative ChatBubbleTextBox - Added in Hint TimeSpan languages added: Pl Bug Fixes RoundToggleButton - Enable Visual State not being respected OpacityToggleButton - Enable Visual State not being respected Prompts VS Crash fix for IsPrompt=true More...AssaultCube Reloaded: 2.5.2 Unnamed: Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we try to pack it. Try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compile your own for Linux (source included) Added 3rd person Added mario jumps Fixed nextprimary code exploit ...NPOI: NPOI 2.0: New features a. Implement OpenXml4Net (same as System.Packaging from Microsoft). It supports both .NET 2.0 and .NET 4.0 b. Excel 2007 read/write library (NPOI.XSSF) c. Word 2007 read/write library(NPOI.XWPF) d. NPOI.SS namespace becomes the interface shared between XSSF and HSSF e. Load xlsx template and save as new xlsx file (partially supported) f. Diagonal line in cell both in xls and xlsx g. Support isRightToLeft and setRightToLeft on the common spreadsheet Sheet interface, as per existin...BugNET Issue Tracker: BugNET 1.1: This release includes bug fixes from the 1.0 release for email notifications, RSS feeds, and several other issues. Please see the change log for a full list of changes. http://support.bugnetproject.com/Projects/ReleaseNotes.aspx?pid=1&m=76 Upgrade Notes The following changes to the web.config in the profile section have occurred: Removed <add name="NotificationTypes" type="String" defaultValue="Email" customProviderData="NotificationTypes;nvarchar;255" />Added <add name="ReceiveEmailNotifi...????: ????2.0.5: 1、?????????????。RiP-Ripper & PG-Ripper: PG-Ripper 1.4.01: changes NEW: Added Support for Clipboard Function in Mono Version NEW: Added Support for "ImgBox.com" links FIXED: "PixHub.eu" links FIXED: "ImgChili.com" links FIXED: Kitty-Kats Forum loginPlayer Framework by Microsoft: Player Framework for Windows 8 (Preview 5): Support for Smooth Streaming SDK beta 2 Support for live playback New bitrate meter and SD/HD indicators Auto smooth streaming track restriction for snapped mode to conserve bandwidth New "Go Live" button and SeekToLive API Support for offset start times Support for Live position unique from end time Support for multiple audio streams (smooth and progressive content) Improved intellisense in JS version Support for Windows 8 RTM ADDITIONAL DOWNLOADSSmooth Streaming Client SD...New ProjectsA Java Open Platform: A Java Open PlatformAutomation Tools: noneAzManPermissions: Allows AzMan (Authorization Manager) operation permission checks declaratively and imperatively. It can connect to AzMan stores directly or through a service.Configuration Manager 2012 Automation: Configuration Manager 2012 Automation is a powershell project to help perform the basic implementation of a CM12 infrastructure...Dynamicweb Blog Engine 2012: A simple blog engine built on Dynamicweb.E Lixo: Projeto E_LIXOEasy Windows Service Manager: Easy Windows Service Manager (ewsm) is a desktop utility that enables the easily management of Windows services. flexwork: A Flex Pluggable Extension FrameworkGit On Codeplex: Just trying git on CodePlexGT.BlogBox: Blogsite-Webtemplate for SharePoint 2010gvPoco: gvPoco is a .NET class library for the Google Visualization Charts API. IAllenSoft: IAllenSoft is a silverlight control library, which originates from some idea. Its target is to improve development productivity for silverlight projects. ListNetRanker: ListNetRanker is a listwise ranker based on machine learning. Given documents and query's feature set, ListNetRanker will rank these documents by ranking score.lvyao: stillMetro Tic-Tac-Toe: Tic-Tac-Toe is a Windows 8 developed using MonoGame for Windows 8. The intent of this code is to help XNA developers with porting their XNA apps to Windows 8myProject: my private code Nintemulator: Nintemulator is a work in progress multi-system emulator. Plans for emulated systems are NES, SNES, GB/GBC, GBA.Picnic Game: Picnic Game is a 2D game written in Small Basic. The objective is to get the pizza to the basket before you get stung or time runs out.Picnic Level Editor: Picnic Game is a 2D 3rd person game where you are an ant, and you have to gather the pizza and bring it to the basket before you get stung by a bee.ResCom: ResCom is a community response system for Windows Phone 8Scalable Object Persistence (SOP) Framework: Scalable object persistence (SOP) framework. RDBMS "index" like performance and scale on data Stores but without the unnecessary baggage, fine grained control.self-balancing-avl-tree: Self balancing AVL tree with Concat and Split operations.SEMS(synthetical evaluation management system): that's itsergionadal-mvc: Mvc para sistemas AndroidTFS Test Plan Builder: TFS Test plan builder is a tool to assis users of Microst Test Manager to build new test plans then moving from sprint to sprint or release to release The Excel Library: DExcelLibrary is a project that allows you to load and display "any" excel file given a specificaction of with areas/grids to loadTimePunch Metro Wpf Library: This library contains WPF controls and MVVM Implementation to create touch optimized applications in the new Windows 8 UI style formerly known as "Metro". UniPie: UniPie is a system wide pie menu system for sending key-mouse button combinations to certain applications. It can also convert one combo to another.xref: This is an extension of the classic FizzBuzz problem.ZombieRPG: Basic Zombie RPG game made using Game Maker??????: ZHJP

    Read the article

  • Strange GTK3 issue with Audacious and Evince (Document Viewer)

    - by Sman789
    I find that, in some GTK3 apps such as Audacious and Evince (Document Viewer), parts of the UI are pure black, which looks ugly and out-of-place. It is not intentional, as the screenshots on both websites show the app looking different. I only have this issue with the Adwaita GTK theme, but since it comes with Gnome 3 and is the main theme these apps are designed for, I'm guessing the problem is not simply the theme having some bug (though the Ubuntu package might). I have had this issue on two laptops now, running both Ubuntu 12.04 and Xubunu 12.10 with Gnome Shell and Adwaita. The screenshots below show the problem: Audcious's is visible in the search area around the text box, and behind the playlist tabs, and Evince's is visible in more or less the same position and around the document itself. Compare this from the Audacious homepage: With this image from my system: And Evince too:

    Read the article

  • Computer Boot/Installation Failure

    - by Marcus
    I recently tried to insatll Kubuntu and it failed. It completely removed everything off of my HDD and there is no operating system. Everytime I try to install a Distro it fails during instillation. I got Ubuntu 13.04 to work but it required a reboot and after that it did not work. I tried to re-install Ubuntu but it failed. I have tried Ubuntu, Kubuntu, and Xubuntu and they all failed. With Kubuntu and Xubuntu I get an error saying, "The 'grub-efi-amd64-signed' package failed to install into /target/. Without the GRUB boot loader, the installed system will not boot". When I select try (distro) it loads up but the installation won't finish. I do not want to have to try the distro everytime I want to get on it. Any help?

    Read the article

  • Including slick2d or slick-util in maven build?

    - by BotskoNet
    I'm converting a project to lwjgl and trying to use slick-util as well. There's no slick-util maven repo anywhere (nor slick2d itself anymore). I've included local dependancies before using <dependency> <groupId>org.newdawn</groupId> <artifactId>slick</artifactId> <version>237</version> <scope>system</scope> <systemPath>${project.basedir}/lib/slick-util.jar</systemPath> </dependency> The maven package process runs without issue, but when I try to run the jar, it errors out with a ClassNotFoundException. There's no mention of slick-util in the manifest and I can't find out how to make my game load that jar properly. Side question: how do I ensure when I distribute my applications, the game properly installs these libraries?

    Read the article

  • Trying to implement fling events on an object

    - by Adam Short
    I have a game object, well a bitmap, which I'd like to "fling". I'm struggling to get it to fling ontouchlistener due to it being a bitmap and not sure how to proceed and I'm struggling to find the resources to help. Here's my code so far: https://github.com/addrum/Shapes GameActivity class: package com.main.shapes; import android.app.Activity; import android.content.Context; import android.graphics.Bitmap; import android.graphics.BitmapFactory; import android.graphics.Canvas; import android.os.Bundle; import android.view.GestureDetector; import android.view.MotionEvent; import android.view.SurfaceHolder; import android.view.SurfaceView; import android.view.View.OnTouchListener; import android.view.Window; public class GameActivity extends Activity { private GestureDetector gestureDetector; View view; Bitmap ball; float x, y; @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); //Remove title bar this.requestWindowFeature(Window.FEATURE_NO_TITLE); view = new View(this); ball = BitmapFactory.decodeResource(getResources(), R.drawable.ball); gestureDetector = new GestureDetector(this, new GestureListener()); x = 0; y = 0; setContentView(view); ball.setOnTouchListener(new OnTouchListener() { @Override public boolean onTouch(android.view.View v, MotionEvent event) { // TODO Auto-generated method stub return false; } }); } @Override protected void onPause() { super.onPause(); view.pause(); } @Override protected void onResume() { super.onResume(); view.resume(); } public class View extends SurfaceView implements Runnable { Thread thread = null; SurfaceHolder holder; boolean canRun = false; public View(Context context) { super(context); holder = getHolder(); } public void run() { while (canRun) { if (!holder.getSurface().isValid()) { continue; } Canvas c = holder.lockCanvas(); c.drawARGB(255, 255, 255, 255); c.drawBitmap(ball, x - (ball.getWidth() / 2), y - (ball.getHeight() / 2), null); holder.unlockCanvasAndPost(c); } } public void pause() { canRun = false; while (true) { try { thread.join(); } catch (InterruptedException e) { e.printStackTrace(); } break; } thread = null; } public void resume() { canRun = true; thread = new Thread(this); thread.start(); } } } GestureListener class: package com.main.shapes; import android.view.GestureDetector.SimpleOnGestureListener; import android.view.MotionEvent; public class GestureListener extends SimpleOnGestureListener { private static final int SWIPE_MIN_DISTANCE = 120; private static final int SWIPE_THRESHOLD_VELOCITY = 200; @Override public boolean onFling(MotionEvent e1, MotionEvent e2, float velocityX, float velocityY) { if (e1.getX() - e2.getX() > SWIPE_MIN_DISTANCE && Math.abs(velocityX) > SWIPE_THRESHOLD_VELOCITY) { //From Right to Left return true; } else if (e2.getX() - e1.getX() > SWIPE_MIN_DISTANCE && Math.abs(velocityX) > SWIPE_THRESHOLD_VELOCITY) { //From Left to Right return true; } if (e1.getY() - e2.getY() > SWIPE_MIN_DISTANCE && Math.abs(velocityY) > SWIPE_THRESHOLD_VELOCITY) { //From Bottom to Top return true; } else if (e2.getY() - e1.getY() > SWIPE_MIN_DISTANCE && Math.abs(velocityY) > SWIPE_THRESHOLD_VELOCITY) { //From Top to Bottom return true; } return false; } @Override public boolean onDown(MotionEvent e) { //always return true since all gestures always begin with onDown and<br> //if this returns false, the framework won't try to pick up onFling for example. return true; } }

    Read the article

  • Is extensive documentation a code smell?

    - by Griffin
    Every library, open-source project, and SDK/API I've ever come across has come packaged with a (usually large) documentation file, and this seems contradictory to the wide-spread belief that good code needs little to no comments. What separates documentation from this programming methodology? a one to two page overview of a package seems reasonable, but elegant code combined with standard intelisense should have theoretically deprecated the practice of documentation by now IMO. I feel like companies only create detailed documentation and tutorials because its what they've always done. Why should developers have to constantly be searching through online documentation in order to learn how to do things when such information should be intrinsic to the classes, methods and namespaces?

    Read the article

  • Cannot ping router with a static IP assigned?

    - by Uriah
    Alright. I am running Ubuntu LTS 12.04 and am trying to configure a local caching/master DNS server so I am using Bind9. First, here are some things via default DHCP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # The primary network interface - STATIC #auto eth0 #iface eth0 inet static # address 192.168.2.113 # netmask 255.255.255.0 # network 192.168.2.0 # broadcast 192.168.2.255 # gateway 192.168.2.1 # dns-search uclemmer.net # dns-nameservers 192.168.2.113 8.8.8.8 /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 search uclemmer.net ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.103 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1067 errors:0 dropped:0 overruns:0 frame:0 TX packets:2504 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:153833 (153.8 KB) TX bytes:214129 (214.1 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:915 errors:0 dropped:0 overruns:0 frame:0 TX packets:915 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:71643 (71.6 KB) TX bytes:71643 (71.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. 64 bytes from 192.168.2.1: icmp_req=1 ttl=64 time=0.368 ms 64 bytes from 192.168.2.1: icmp_req=2 ttl=64 time=0.224 ms 64 bytes from 192.168.2.1: icmp_req=3 ttl=64 time=0.216 ms 64 bytes from 192.168.2.1: icmp_req=4 ttl=64 time=0.237 ms --- 192.168.2.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2997ms rtt min/avg/max/mdev = 0.216/0.261/0.368/0.063 ms ping -c 4 google.com PING google.com (74.125.134.102) 56(84) bytes of data. 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=1 ttl=48 time=15.1 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=2 ttl=48 time=11.4 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=3 ttl=48 time=11.6 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=4 ttl=48 time=11.5 ms --- google.com ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 11.488/12.465/15.118/1.537 ms ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.103 As you can see, with DHCP everything seems to work fine. Now, here are things with static IP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface #auto eth0 #iface eth0 inet dhcp # The primary network interface - STATIC auto eth0 iface eth0 inet static address 192.168.2.113 netmask 255.255.255.0 network 192.168.2.0 broadcast 192.168.2.255 gateway 192.168.2.1 dns-search uclemmer.net dns-nameservers 192.168.2.1 8.8.8.8 I have tried dns-nameservers in various combos of *.2.1, *.2.113, and other reliable, public nameservers. /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 nameserver 8.8.8.8 search uclemmer.net Obviously, when I change the nameservers in the /etc/network/interfaces file, the nameservers change here too. ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.113 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1707 errors:0 dropped:0 overruns:0 frame:0 TX packets:2906 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:226230 (226.2 KB) TX bytes:263497 (263.4 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:985 errors:0 dropped:0 overruns:0 frame:0 TX packets:985 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:78625 (78.6 KB) TX bytes:78625 (78.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3023ms ping -c 4 google.com ping: unknown host google.com Lastly, here are my bind zone files: /etc/bind/named.conf.options cat /etc/bind/named.conf.options options { directory "/etc/bind"; // // // query-source address * port 53; notify-source * port 53; transfer-source * port 53; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. // forwarders { // 0.0.0.0; // }; forwarders { // My local 192.168.2.113; // Comcast 75.75.75.75; 75.75.76.76; // Google 8.8.8.8; 8.8.4.4; // DNSAdvantage 156.154.70.1; 156.154.71.1; // OpenDNS 208.67.222.222; 208.67.220.220; // Norton 198.153.192.1; 198.153.194.1; // Verizon 4.2.2.1; 4.2.2.2; 4.2.2.3; 4.2.2.4; 4.2.2.5; 4.2.2.6; // Scrubit 67.138.54.100; 207.255.209.66; }; // // // //allow-query { localhost; 192.168.2.0/24; }; //allow-transfer { localhost; 192.168.2.113; }; //also-notify { 192.168.2.113; }; //allow-recursion { localhost; 192.168.2.0/24; }; //======================================================================== // If BIND logs error messages about the root key being expired, // you will need to update your keys. See https://www.isc.org/bind-keys //======================================================================== dnssec-validation auto; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.local cat /etc/bind/named.conf.local // // Do any local configuration here // // Consider adding the 1918 zones here, if they are not used in your // organization //include "/etc/bind/zones.rfc1918"; zone "example.com" { type master; file "/etc/bind/zones/db.example.com"; }; zone "2.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/db.2.168.192.in-addr.arpa"; /etc/bind/zones/db.example.com cat /etc/bind/zones/db.example.com ; ; BIND data file for example.com interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 192.168.2.113 @ IN AAAA ::1 @ IN MX 10 yossarian.example.com. ; yossarian IN A 192.168.2.113 router IN A 192.168.2.1 printer IN A 192.168.2.200 ; ns01 IN CNAME yossarian.example.com. www IN CNAME yossarian.example.com. ftp IN CNAME yossarian.example.com. ldap IN CNAME yossarian.example.com. mail IN CNAME yossarian.example.com. /etc/bind/zones/db.2.168.192.in-addr.arpa cat /etc/bind/zones/db.2.168.192.in-addr.arpa ; ; BIND reverse data file for 2.168.192.in-addr interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 255.255.255.0 ; 113 IN PTR yossarian.example.com. 1 IN PTR router.example.com. 200 IN PTR printer.example.com. ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.113 I can SSH in to the machine locally at *.2.113 or at whatever address is dynamically assigned when in DHCP "mode". *2.113 is in my router's range and I have ports open and forwarding to the server. Pinging is enabled on the router too. I briefly had a static configuration working but it died after the first reboot. Please let me know what other info you might need. I am beyond frustrated/baffled.

    Read the article

  • No bass from the speakers

    - by Bhavesh Jogadia
    In Ubuntu 11.10 no bass sound at all when try to play mp3 or 2channels audio. I have 5.1/6 channels speakers. When I test speakers from the sound preference it works perfectly fine and then I try to play any MP3 there is no bass only the speakers work, I play 5.1 movies it plays fine bass sounds good. Also tried to to some changes as instructed with deamon.conf file but no go... When I turn my speakers on play speakers only mode it plays the bass but sound quality is not good compared to normal playing. I have a Creative 5.1 vx ca0160 sound card. In Windows also had the same problem unless I do bass redirection crossover frequency so is there any kinda software package or any kinda changes i can make in system file so that my speaker bass works fine or any thing who can let me change the bass redirection crossover frequency?

    Read the article

  • Interactive manifest editing with the Automated Installer Manifest Wizard

    - by Glynn Foster
    Oracle Solaris 11.2 adds a new Automated Installer (AI) Manifest Wizard to allow administrators to more easily create AI manifests for use in provisioning new client systems in the data center. The AI Manifest Wizard is a web web based interface that steps administrators through the basics of the AI manifest - target disks and layout selection, additional ZFS pools and datasets, IPS publisher and package selection, and the creation of any Oracle Solaris Zone virtual environments. The end result is an AI manifest without having to directly edit XML, and this can then be associated with an appropriate AI service. To get started, check out How To Create an Automated Installer Manifest with an Interactive Wizard

    Read the article

  • cannot run c compiled programs. if you meant to cross compile use --host' Ubuntu

    - by Ali.A
    I'm completely new to Ubuntu I downloaded and unpacked a tar.gz package, after extraction, it is said in its documentation : "type ./configure --disable-gts" But when i run this command alone it tells me "Permission Denied" error. Then i tried to use "sh ./configure --disable-gts" insted, but this time i faced this error: configure: error: cannot run C compiled programs. If you meant to cross compile, use `--host'. How can i overcome these two problems? (I mean permission and compile error) I'm just a rookie and i need urgent help. Thanx

    Read the article

  • Change font programmatically for GTK3 TextView (quickly-widgets TextEditor)

    - by monotasker
    In an app using PyGI and GTK3, I'm trying to let the user set the font family and size in a TextView through my app's settings dialog. In PyGI the TextView object has "set" methods for several properties, but not for font properties. I can set the font family via CSS using a CSS style provider. But I can't change that CSS dynamically to respect the font selected by a user. So how can I do this? (Note that the widget in question is actually the TextEditor from the quickly-widgets package and I'm using Quickly to build the app.) Thanks, Ian

    Read the article

  • Installing drivers using DPInst

    - by Sreejith S
    You can use DPInst (Driver Package Installer) to install driver files for your device on Windows Operating Systems. DPInst.exe is part of DIFx (Driver Install Framework tools) which comes along with the Windows Driver Kit (WDK). You can find DPInst redistributable inside the redist\DIFx\DPInst folder of the WDK. Using DPInst to install driver: 1)  http://msdn.microsoft.com/en-us/library/ff553601(VS.85).aspx  2) http://blogs.technet.com/svengruenitz/archive/2008/07/02/driver-installation-and-updating-made-easy-dpinst-exe.aspx How to ? 1. Copy dpinst.exe to the folder where the driver files (sys, inf, dll) reside. 2. Optionally create a dpinst.xml file which is used to configure dpinst (http://msdn.microsoft.com/en-us/library/ff550803(VS.85).aspx) If your drivers are not signed you must use the <legacyMode/> tag in dpinst.xml. 3. Run dpinst.exe to install drivers using a 'device driver update' wizard.

    Read the article

  • Kinetic Scroll in Maverick

    - by Shoaib
    I have Sony VAIO FW 230J laptop. I was using Lucid and upgraded my system to Maverick beta in September 2010. Although there were few issues with beta release on my system although I did not felt myself in any deadlock. The most notable experience on my ubuntu was the smooth and kinetic scrolling and very sensitive touch pad experience with finer control that was oddly normal in previous releases and even on windows 7 currently. Definitely this release of ubuntu is improved for touch UI experience. I believe that this is magic of 10.10. For my official system I waited until the final release was out. After installing (upgrading) official system to Maverick I am not feeling the same smooth and kinetic scroll experience. My laptop has Graphics: Intel DMA-X4500MHD while my official desktop has Graphics: Intel DMA-X4500HD Do I need to install or update some software package to have similar kinetic scroll experience?

    Read the article

  • installing my Graphic Card on ubuntu12.04

    - by lamouchi amine
    I have a HP Pavillion G6 series 1225, i5 laptop with Radeon HD 6470M switchable VGA. i installed Ubuntu 12.04 LTS but the VGA drivers don't work properly. I want to install drivers into the Ubuntu. But when I do it arrived error message like this: sorry, installation of this driver failed. Please have a look at the log file for details: /var/log/jockey.log I found a solution in a link: http://ubuntuforums.org/showthread.php?t=1930450 It works for a few steps and then in the installation of the package of the AMD driver, a message pops up 'fatal error' and it redirects me to Ask Ubuntu to find a solution, please help me, I need to make it work.

    Read the article

  • Need Help Unable to Mount Location

    - by Don't ASk Ubun
    I am not able to start Windows and am using a DVD copy of Ubuntu to start up. I see my 750 GB Hard Disk, but if I click it i get this error: Error mounting: mount exited with exit code 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error Failed to read NTFS $Bitmap: Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. After googling for a while I think I need to do sudo apt-get install ntfsprogs but when I try that: E: Package 'ntfsprogs' has no installation candidate My problem is a lot like this thread

    Read the article

  • Why does update-notifier contains system-crash-notification?

    - by int_ua
    I just had "System Program Problem Detected" window appearing several times before user session even started (I have KDM with autologin to locked session). I traced it with xprop to being /usr/lib/update-notifier/system-crash-notification which is binary (while I expected it to be some script) and belongs to update-notifier package (while I expected it to be somewhere from apport*). P.S. Clicking on Report problem... button didn't do anything. $ dpkg -s update-notifier | grep Version Version: 0.147 $ dpkg -L update-notifier | grep system-crash /usr/lib/update-notifier/system-crash-notification $ grep RELEASE /etc/lsb-release DISTRIB_RELEASE=13.10

    Read the article

  • How to apply a changelog file to packages in a PPA when building from recipe?

    - by rafalcieslak
    When my package gets build by launchpad using a recipe, it ignores the ./debian/changelog file I provide, and it generates a useless one, like following: harmonyseq (0.14~natty1) maverick; urgency=low * Auto build. -- Rafal Cieslak <[email protected]> Tue, 25 Jan 2011 16:56:57 +0000 It would be much better if launchpad stored the list of changes I prepared in the changelog file, rather than just putting there "Auto build". How do I force launchpad to use the list of changes from my changelog file, when building packages from a recipe?

    Read the article

  • A deadlock was detected while trying to lock variables in SSIS

    Error: 0xC001405C at SQL Log Status: A deadlock was detected while trying to lock variables "User::RowCount" for read/write access. A lock cannot be acquired after 16 attempts. The locks timed out. Have you ever considered variable locking when building your SSIS packages? I expect many people haven’t just because most of the time you never see an error like the one above. I’ll try and explain a few key concepts about variable locking and hopefully you never will see that error. First of all, what is all this variable locking all about? Put simply SSIS variables have to be locked before they can be accessed, and then of course unlocked once you have finished with them. This is baked into SSIS, presumably to reduce the risk of race conditions, but with that comes some additional overhead in that you need to be careful to avoid lock conflicts in some scenarios. The most obvious place you will come across any hint of locking (no pun intended) is the Script Task or Script Component with their ReadOnlyVariables and ReadWriteVariables properties. These two properties allow you to enter lists of variables to be used within the task, or to put it another way, these lists of variables to be locked, so that they are available within the task. During the task pre-execute phase the variables and locked, you then use them during the execute phase when you code is run, and then unlocked for you during the post-execute phase. So by entering the variable names in one of the two list, the locking is taken care of for you, and you just read and write to the Dts.Variables collection that is exposed in the task for the purpose. As you can see in the image above, the variable PackageInt is specified, which means when I write the code inside that task I don’t have to worry about locking at all, as shown below. public void Main() { // Set the variable value to something new Dts.Variables["PackageInt"].Value = 199; // Raise an event so we can play in the event handler bool fireAgain = true; Dts.Events.FireInformation(0, "Script Task Code", "This is the script task raising an event.", null, 0, ref fireAgain); Dts.TaskResult = (int)ScriptResults.Success; } As you can see as well as accessing the variable, hassle free, I also raise an event. Now consider a scenario where I have an event hander as well as shown below. Now what if my event handler uses tries to use the same variable as well? Well obviously for the point of this post, it fails with the error quoted previously. The reason why is clearly illustrated if you consider the following sequence of events. Package execution starts Script Task in Control Flow starts Script Task in Control Flow locks the PackageInt variable as specified in the ReadWriteVariables property Script Task in Control Flow executes script, and the On Information event is raised The On Information event handler starts Script Task in On Information event handler starts Script Task in On Information event handler attempts to lock the PackageInt variable (for either read or write it doesn’t matter), but will fail because the variable is already locked. The problem is caused by the event handler task trying to use a variable that is already locked by the task in Control Flow. Events are always raised synchronously, therefore the task in Control Flow that is raising the event will not regain control until the event handler has completed, so we really do have un-resolvable locking conflict, better known as a deadlock. In this scenario we can easily resolve the problem by managing the variable locking explicitly in code, so no need to specify anything for the ReadOnlyVariables and ReadWriteVariables properties. public void Main() { // Set the variable value to something new, with explicit lock control Variables lockedVariables = null; Dts.VariableDispenser.LockOneForWrite("PackageInt", ref lockedVariables); lockedVariables["PackageInt"].Value = 199; lockedVariables.Unlock(); // Raise an event so we can play in the event handler bool fireAgain = true; Dts.Events.FireInformation(0, "Script Task Code", "This is the script task raising an event.", null, 0, ref fireAgain); Dts.TaskResult = (int)ScriptResults.Success; } Now the package will execute successfully because the variable lock has already been released by the time the event is raised, so no conflict occurs. For those of you with a SQL Engine background this should all sound strangely familiar, and boils down to getting in and out as fast as you can to reduce the risk of lock contention, be that SQL pages or SSIS variables. Unfortunately we cannot always manage the locking ourselves. The Execute SQL Task is very often used in conjunction with variables, either to pass in parameter values or get results out. Either way the task will manage the locking for you, and will fail when it cannot lock the variables it requires. The scenario outlined above is clear cut deadlock scenario, both parties are waiting on each other, so it is un-resolvable. The mechanism used within SSIS isn’t actually that clever, and whilst the message says it is a deadlock, it really just means it tried a few times, and then gave up. The last part of the error message is actually the most accurate in terms of the failure, A lock cannot be acquired after 16 attempts. The locks timed out.  Now this may come across as a recommendation to always manage locking manually in the Script Task or Script Component yourself, but I think that would be an overreaction. It is more of a reminder to be aware that in high concurrency scenarios, especially when sharing variables across multiple objects, locking is important design consideration. Update – Make sure you don’t try and use explicit locking as well as leaving the variable names in the ReadOnlyVariables and ReadWriteVariables lock lists otherwise you’ll get the deadlock error, you cannot lock a variable twice!

    Read the article

< Previous Page | 413 414 415 416 417 418 419 420 421 422 423 424  | Next Page >