Search Results

Search found 12283 results on 492 pages for 'tcp port'.

Page 417/492 | < Previous Page | 413 414 415 416 417 418 419 420 421 422 423 424  | Next Page >

• Media Center setup won't complete for watching TV

  - by Robert

  I have a problem watching TV in Media Center. The TV constantly pauses 1/2 second then plays 1 second, pauses 1/2 second, plays 1 second - it is constant and does not vary. This problem occurs on all channels, live or recorded. The bottom 5th of the screen is solid green. I know the problem is Media Center because I can use Pinnacle's TVCenterPro and there is no skipping/pausing (and not green on bottom). I was using cable, and switched to DirecTV (satellite). Trying to do "Set up TV signal" in Media Center seems to be what broke it. I get an error "IR Hardware not detected." I can use the remote to "try again" - so the IR hardware works fine (Media Center's remote/sensor). I tried plugging the IR Blaster into both ports, and I tried a different USB port for the IR receiver. I can't complete the setup. Media Center was playing it okay before I tried to run setup. (I ran setup to try to do recording with Media Center.) Pinnacle PCTV 800i HD PCI card (coax cable from DirecTV tuner), ATI Radeon HD 3200 Graphics, Windows XP SP3 Media Center Edition, AMD Athlon Dual Core 2.5 GHz, 1.75 GB RAM.

  Read the article

• Windows server 2008, Dns. I'm confused

  - by Dejan.S

  Hi. I recently setup a window server 2008 server at work. Keep in mind I have never worked with it before:). Background story is I try to host a couple of sites on the server through iis7, I got domains (currently hosted at other hosters for the moment). I want to point the domain NS to my server on all of them. I have read how to setup a DNS on the server, so far so good. now my dns is companyname.com in the server manager I got DNS / companyname.com in there I got ns.comanyname.com, in there I got Host(A) with the server ip now this is where I get confused about how things work with DNS, NS & Host(A). I dont know how to assign(so to speak) the Host(A) to one of my webapps hosted on the iis7, because that is the pointer right?. To leave an example to work with lets say, Hosted.com is hosted on my iis7, on port 81. You don't understand how great full I would be if somebody could explain this confusion. EDIT: Do I need to create a DNS for every site hosted on my server? Or just make a A Host/Record? Thanks guys

  Read the article

• Postfix a lot of relay acces denied errors in maillog

  - by tester3

  I'm on Centos 6.5 with Postfix/Dovecot and some virtual domains. Postfix works fine, but I've got a lot of messages like this "NOQUEUE: reject: RCPT from 1-160-127-12.dynamic.hinet.net[1.160.127.12]: 454 4.7.1 : Relay access denied; from= to= proto=SMTP" in my maillog. I've tried to close port 25 with iptables, when I do so - I got no such messages, but my mail system starts work incorrectly and can't receive mail from other hosts. Please help! My postconf -n: alias_database = $alias_maps alias_maps = hash:/etc/postfix/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 html_directory = no inet_interfaces = all inet_protocols = ipv4 mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man message_size_limit = 20971520 mydestination = localhost.$mydomain, localhost newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES relay_domains = * sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtp_tls_cert_file = /etc/pki/tls/certs/example.com.crt smtp_tls_key_file = /etc/pki/tls/private/example.com.key smtp_tls_loglevel = 1 smtp_tls_session_cache_database = btree:/etc/postfix/smtp_tls_session_cache smtp_tls_session_cache_timeout = 3600s smtp_use_tls = yes smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = example.com smtpd_sasl_path = /var/run/dovecot/auth-client smtpd_sasl_security_options = noanonymous smtpd_sasl_tls_security_options = $smtpd_sasl_security_options smtpd_sasl_type = dovecot smtpd_tls_cert_file = /etc/pki/tls/certs/example.com.crt smtpd_tls_key_file = /etc/pki/tls/private/example.com.key smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_database = btree:/etc/postfix/smtpd_tls_session_cache smtpd_tls_session_cache_timeout = 3600s smtpd_use_tls = yes soft_bounce = yes tls_random_source = dev:/dev/urandom unknown_local_recipient_reject_code = 550 virtual_alias_maps = hash:/etc/postfix/vmail_aliases virtual_gid_maps = static:2222 virtual_mailbox_base = /var/vmail virtual_mailbox_domains = hash:/etc/postfix/vmail_domains virtual_mailbox_maps = hash:/etc/postfix/vmail_mailbox virtual_minimum_uid = 2222 virtual_transport = virtual virtual_uid_maps = static:2222 Please help! Will attach master.cf or anything other if needed.

  Read the article

• how does a computer know which IP address will route information to the internet? [closed]

  - by JohnMerlino

  Possible Duplicate: How does IPv4 Subnetting Work? For example, I have a computer with a Network Inteface Card (NIC) which is an Ethernet card that is connected by Ethernet cables to a router. There is also another computer with a cable that is connected in another port of the router. This is a Belkin router operating over an Ethernet in the LAN. When I connect to serverfault.com, it maps to an IP address. My computer now has a task of connecting to that IP address. But my computer itself cannot connect to the serverfault IP address. Only the router can. So the task of my computer is to find the IP address associated with the node that will do the routing to the public internet. How does my computer know that a particular IP address in the local network belongs to the router, and is not another computer connected to the network? Is this information configured manually in the operating system itself? Somehow my computer must know that it must send ethernet frames to the router with the expectation that the router will then send the packet to a public IP. How does it know to send it to the router? Is the router's ip address stored in my computer like a key/value pair e.g. "router"="192.168.2.6", so that when I put a public ip address, my computer first knows to connect to 192.168.2.6?

  Read the article

• Setup git repository on gentoo server using gitosis & ssh

  - by ikso

  I installed git and gitosis as described here in this guide Here are the steps I took: Server: Gentoo Client: MAC OS X 1) git install emerge dev-util/git 2) gitosis install cd ~/src git clone git://eagain.net/gitosis.git cd gitosis python setup.py install 3) added git user adduser --system --shell /bin/sh --comment 'git version control' --no-user-group --home-dir /home/git git In /etc/shadow now: git:!:14665:::::: 4) On local computer (Mac OS X) (local login is ipx, server login is expert) ssh-keygen -t dsa got 2 files: ~/.ssh/id_dsa.pub ~/.ssh/id_dsa 5) Copied id_dsa.pub onto server ~/.ssh/id_dsa.pub Added content from file ~/.ssh/id_dsa.pub into file ~/.ssh/authorized_keys cp ~/.ssh/id_dsa.pub /tmp/id_dsa.pub sudo -H -u git gitosis-init < /tmp/id_rsa.pub sudo chmod 755 /home/git/repositories/gitosis-admin.git/hooks/post-update 6) Added 2 params to /etc/ssh/sshd_config RSAAuthentication yes PubkeyAuthentication yes Full sshd_config: Protocol 2 RSAAuthentication yes PubkeyAuthentication yes PasswordAuthentication no UsePAM yes PrintMotd no PrintLastLog no Subsystem sftp /usr/lib64/misc/sftp-server 7) Local settings in file ~/.ssh/config: Host myserver.com.ua User expert Port 22 IdentityFile ~/.ssh/id_dsa 8) Tested: ssh [email protected] Done! 9) Next step. There I have problem git clone [email protected]:gitosis-admin.git cd gitosis-admin SSH asked password for user git. Why ssh should allow me to login as user git? The git user doesn't have a password. The ssh key I created is for the user expert. How this should work? Do I have to add some params to sshd_config?

  Read the article

• Unable to logon using terminal server connection

  - by satch

  I have several W2K3 SP2 servers, admin TS enabled. I discovered this morning, I was unable to logon into some of them. I've a couple of Citrix servers in different farms, a SAP (IA64) app server and a cvs server. All of them show same sympthoms; remote connections are refused. I've been able to logon locally, and terminal server service is up, there are no users (so connections are not depleted). There are no errors in log in most servers. One of the Citrix ones, reported following errors: Event ID 50 Source TermDD Type Error Description The RDP protocol component X.224 detected an error in the protocol stream and has disconnected the client. and Event ID 1006 Source TermService Type Error Description The terminal server received large number of incomplete connections. The system may be under attack. Anyway, I suppose these errors appear because server isn't working, and Citrix users try to logon massively. (I nmap'ed server and port seems up). I've solved this problem rebooting before, but with so many servers affected it seems like a crappy workaround. Any idea about troubleshooting it properly? Thanks in advance

  Read the article

• Using NX with no PasswordAuthentication SSH setup

  - by benmccann

  I'm trying to setup passwordless SSH access. My username is bmccann, so in /etc/ssh/sshd_config I added: PermitRootLogin no PasswordAuthentication no AllowUsers bmccann nx I ran ssh-keygen on the client and put ~/.ssh/id_rsa.pub from the client into ~/.ssh/authorized_keys on the server. I can now login with no password using the ssh command. However, I can no longer access the machine via NX as long as /etc/ssh/sshd_config has "PasswordAuthentication no". Server error logs: $ grep NX /var/log/messages Feb 11 01:25:51 bmccann-htpc NXSERVER-3.4.0-12[23552]: ERROR: Failed authentication. NXSsh exit status is:255 'NXNssUserManager::auth' Feb 11 01:25:51 bmccann-htpc NXSERVER-3.4.0-12[23552]: Failed SSHd authentication for user 'bmccann', to '127.0.0.1', port '22': 'NX> 204 Authentication failed.\n ' 'NXNssUserManager::auth' Feb 11 01:25:51 bmccann-htpc NXSERVER-3.4.0-12[23552]: ERROR: Error while trying to authenticate user:bmccann. NXNssUserManager::auth returned 255 'NXShell::handler_login' Feb 11 01:25:51 bmccann-htpc NXSERVER-3.4.0-12[23552]: ERROR: failed 'sshd authentication' for user 'bmccann' from '108.29.137.64'. NXShell::handler_login NXShell 373 What do I need to do to restore my NX access? Is there something I need to setup in the NX client so that it no longer asks me for a password?

  Read the article

• VNC on Xen failure

  - by BCable

  The following config works and creates a good VM in Xen: # Kernel Setup kernel = "/boot/vmlinuz-2.6.18.8-xenU" # Memory memory = "256" # Disk disk = [ "file:/opt/xen/domains/110/sda1.img,sda1,w", "file:/opt/xen/domains/110/swap.img,sda2,w" ] # container name name = "110" hostname = "boo" # Networking vif = ["type=ieomu, bridge=xenbr0"] # VNC vnc = 1 #vfb = [ 'type=vnc,vncdisplay=2,vnclisten=0.0.0.0,vncpasswd=110' ] # Behavior Settings root = "/dev/sda1" extra = "fastboot" But when I uncomment the VFB line, I get the following error after it hangs for at least 30 seconds: [root@customer 110]# xm create boo.cfg Using config file "./boo.cfg". Error: Device 0 (vkbd) could not be connected. Hotplug scripts not working. Any ideas? Part two of this question: Sometimes it actually works, and a port is opened. When this happens, nmap shows the VNC ports open and I can connect via the VNC client, but it just hangs at "Connection established." and no VNC display shows up. I've tried multiple VNC clients (TightVNC, TightVNC Java Console, RealVNC), but they all fail to connect. Does VNC through Xen require X to be started in order to function? I was under the impression that it would show the console screen, so I'm confused as to why all these issues are occurring. Thanks!

  Read the article

• Issue with SSL using HAProxy and Nginx

  - by Ben Chiappetta

  I'm building a highly available site using a multiple HAProxy load balancers, Nginx web serves, and MySQL servers. The site needs to be able to survive load balancer or web servers nodes going offline without any interruption of service to visitors. Currently, I have two boxes running HAProxy sharing a virtual IP using keepalived, which forward to two web servers running Nginx, which then tie into two MySQL boxes using MySQL replication and sharing a virtual IP using heartbeat. Everything is working correctly except for SSL traffic over HAProxy. I'm running version 1.5 dev12 with openssl support compiled in. When I try to navigate to the virtual IP for haproxy over https, I get the message: The plain HTTP request was sent to HTTPS port. Here's my haproxy.cfg so far, which was mainly assembled from other posts: global log 127.0.0.1 local0 log 127.0.0.1 local1 notice # log 127.0.0.1 local0 user haproxy group haproxy daemon maxconn 20000 defaults log global option dontlognull balance leastconn clitimeout 60000 srvtimeout 60000 contimeout 5000 retries 3 option redispatch listen front bind :80 bind :443 ssl crt /etc/pki/tls/certs/cert.pem mode http option http-server-close option forwardfor reqadd X-Forwarded-Proto:\ https if { is_ssl } reqadd X-Proto:\ SSL if { is_ssl } server web01 192.168.25.34 check inter 1s server web02 192.168.25.32 check inter 1s stats enable stats uri /stats stats realm HAProxy\ Statistics stats auth admin:********* Any idea why SSL traffic isn't being passed correctly? Also, any other changes you would recommend? I still need to configure logging, so don't worry about that section. Thanks in advance your help.

  Read the article

• Suggestions for accessing SQL Server from internet

  - by Ian Boyd

  i need to be able to access a customer's SQL Server, and ideally their entire LAN, remotely. They have a firewall/router, but the guy responsible for it is unwilling to open ports for SQL Server, and is unable to support PPTP forwarding. The admin did open VNC, on a non-stanrdard port, but since they have a dynamic IP it is difficult to find them all the time. In the past i have created a VPN connection that connects back to our network. But that didn't work so well, since when i need access i have to ask the computer-phobic users to double-click the icon and press Connect i did try creating a scheduled task that attempts to keep the VPN connection back to our office up at all times by running: >rasdial "vpn to me" But after a few months the VPN connection went insane, and thought it was both, and neither, connected an disconnected; and the vpn connection wouldn't work again until the server was rebooted. Can anyone think of a way where i can access the customer's LAN that doesn't involve opening ports on the router needing to know their external IP customer interaction of any kind Blah blah blah use vpn vnc protocol has known weaknesses you are unwise to lower your defenses it's not wise to expose SQL Server directly to the internet you stole that line from Empire Customer doesn't care about any of that. Customer wants things to work.

  Read the article

• How do I compile DarWINE in PowerPC Mac OS X 10.4.11...?

  - by Craig W. Davis

  So far I've tried using MacPorts which gives me this error: /Error: Cannot install wine for the arch(s) 'powerpc' because Error: its dependency pkgconfig is only installed for the archs 'i386 ppc'. Error: Unable to execute port: architecture mismatch To report a bug, etc... (I'm not allowed to post two links due to being a new poster...)./ I've also tried using the build script I found in the DarWINE 0.9.12 SDK download that I found on the DarWINE SourceForge.net Project Page... I've also tried the build script that I found at http://code.google.com/p/osxwinebuilder/#Building_Wine_via_the_script... None of these attempts to build DarWINE have actually worked. Whenever I build using the DarWINE build script I run it as follows: /1. I decompress the WINE tarball into ~/Downloads/WINE 2. I cd into ~/Downloads/DarWINE. 3. I run ./winemaker ~/Downloads/WINE/wine-1.2.2 or ./winemaker ~/Downloads/WINE/wine-1.2-rc2 (the reason for trying WINE 1.2-rc2 is that some people managed to get it to build on PowerPC Macs running 10.5.8...)./ I made sure to install Xcode Tools 2.5 & all the SDKs too... The net result is either a syntax type error resulting from trying to run the checked out Google Code DarWINE build script or a bunch of make errors when trying to run the official DarWINE build script that I forcefully extracted from the DarWINE 0.9.12 SDK .dmg file by using Pacifist. I trying to build DarWINE on mid-April 2006 1.42 GHz eMac with DL SuperDrive with Bluetooth 2.0+EDR with 2 GBs of RAM running 10.4.11 as I mentioned earlier... (it came with 10.4.4 on the Mac's Restore DVD-ROM that I ordered from 1-800-SOS-APPL & coconutIdentityCard told me it was made on April 12th 2006 & I know that's right because when I reinstalled Mac OS X 10.4.4 it displayed that it was registered/previously owned by a Hawaiian school...): /make[1]: winegcc: Command not found make[1]: * [main.o] Error 127 make: * [dlls/acledit] Error 2./

  Read the article

• Verify client certificate CN in Tomcat(APR)

  - by Petter

  I'm running a tomcat installation with the APR libraries installed (with the OpenSSL HTTPS stack that comes with it). What I'm trying to do is to lock a specific HTTPS connector down to users of a specific certificate. Adding client certificate verification is no issue, but I can't get it to validate against a specific Common name only. I was perhaps a bit naïve and thought the mod_ssl attribute SSLRequire typically used in Apache Httpd would work, but that property is not recognized by the Tomcat implementation. (http://tomcat.apache.org/tomcat-7.0-doc/config/http.html#SSL%20Support points to some mod_ssl docs, but the Tomcat implementation does not seem to cover all aspects of mod_ssl). I can get this to work by using the Java version of the connector instead of APR (losing some performance) and just add a trust store with that one certificate in it. However, using openssl without the SSLRequire expressions, I'm not sure how to do this with Tomcat7 (on Windows if that matters). <Connector protocol="HTTP/1.1" port="443" maxThreads="150" scheme="https" secure="true" SSLEnabled="true" SSLCertificateFile="mycert.pem" SSLCertificateKeyFile="privkey.pem" SSLCACertificateFile="CABundle.pem" SSLVerifyClient="require" SSLProtocol="TLSv1" SSLRequire="(%{SSL_CLIENT_S_DN_CN} eq &quot;host.example.com&quot;)"/> Can you suggest a way to make this work using Tomcat/APR/OpenSSL?

  Read the article

• FTP Server on Centos 5.8 - Transfer fails randomly

  - by Diego

  Hi have ProFTPD runningon a brand new CentOS 5.8 server with Plesk, and its behaviour is inconsistent at best. I tried to transfer a directory from my PC, and every time I get a transfer failed on a random file. It's never the same one that fails, it just fails. Sometimes it's a .gif, sometimes it's a .css, sometimes it's a JPG. Of several hundred files, a dozen is always failing for no apparent reason. The error that I get is the following: COMMAND:> [27/11/2012 11:43:52] STOR main_border.gif [27/11/2012 11:43:53] 500 Invalid command: try being more creative ERROR:> [27/11/2012 11:43:53] Syntax error: command unrecognized. The above is just an example, the "command unrecognized" occurs with LIST and other commands as well. Here's the ProFTPD configuration, just in case: ServerName "ProFTPD" #ServerType standalone ServerType inetd DefaultServer on <Global> DefaultRoot ~ psacln AllowOverwrite on </Global> DefaultTransferMode binary UseFtpUsers on TimesGMT off SetEnv TZ :/etc/localtime Port 21 Umask 022 MaxInstances 30 ScoreboardFile /var/run/proftpd/scoreboard TransferLog /usr/local/psa/var/log/xferlog #Change default group for new files and directories in vhosts dir to psacln <Directory /var/www/vhosts> GroupOwner psacln </Directory> # Enable PAM authentication AuthPAM on AuthPAMConfig proftpd IdentLookups off UseReverseDNS off AuthGroupFile /etc/group Include /etc/proftpd.include Note: file /etc/proftpd.include is blank. The above is the default configuration set by Plesk 11. I don't know much of why is that way, my knowledge of Linux System Administration is very basic and the one of ProFTPD is a complete zero. Thanks in advance for the help. Update Issue experienced with CuteFTP and FileZilla. Update Replaced ProFTPd with PureFTPd, issue persists. Sometimes I get "command unrecognized", sometimes "failed to establish data connection". I'm starting to think that it could be a network issue, but I have completely zero knowledge of networking.

  Read the article

• first time setting up ssl, running into a strange problem, tutorials haven't been too helpful

  - by pedalpete

  This is my first time trying to set-up an ssl for one a site, and I'm running it on a server that has 3 other sites already hosted. I'm running apache2.?? and the install came with an ssl.conf page. The ssl.conf has the following settings LoadModule ssl_module modules/mod_ssl.so Listen 443 AddType application/x-x509-ca-cert .crt AddType application/x-pkcs7-crl .crl <VirtualHost *:443> ServerAdmin [email protected] DocumentRoot /var/www/html/securesite ServerName securesite.com ErrorLog logs/securesite-error_log CustomLog logs/securesite-access_log common SSLEngine on SSLCertificateFile /etc/httpd/ssl.crt/securesite.com.crt SSLCertificateKeyFile /etc/httpd/ssl.key/server.key SSLCertificateChainFile /etc/httpd/ssl.crt/gd_bundle.crt </VirtualHost> When I run 'apachectl configtest', I don't get any errors, but running 'apachectl -k restart', I get 'httpd not running, trying to start'. I have two questions 1) Is there an error in the way I'm defining my virtualhost for 443?? the rest of my entries point to <VirtualHost *:80. When I comment out the above entry, apache runs fine. 2) do I need to set-up a redirect from port 80 for secure site? Because most users are going to go to http: or www. , and I need to send them to https: does apache do this automatically? or do i need to create an entry with a redirect?

  Read the article

• Appears to be "randomly" switching between the acl matched backend and the default backend

  - by Xoor

  I have HAProxy acting as a proxy in front of: An NGinx instance An in-house load balancer in front of multiple dynamic services exposed with socket.io (websockets) My problem is that from time to time my connections are proxied correctly to my socket.io cluster, and then randomly it fallsback to routing to NGinx which obviously is annoying and meaningless since NGinx isn't mean't to handle the request. This happens when requesting for URLs of the format : http://mydomain.com/backends/* There's an ACL in the HAProxy config to match the '/backends/*' path. Here's a simplified version of my HAProxy config (removed extra unrelated entries and changed names): global daemon maxconn 4096 user haproxy group haproxy nbproc 4 defaults mode http timeout server 86400000 timeout connect 5000 log global #this frontend interface receives the incoming http requests frontend http-in mode http #process all requests made on port 80 bind *:80 #set a large timeout for websockets timeout client 86400000 # Default Backend default_backend www_backend # Loadfire (socket cluster) acl is_loadfire_backends path_beg /backends use_backend loadfire_backend if is_loadfire_backends # NGinx backend backend www_backend server www_nginx localhost:12346 maxconn 1024 # Loadfire backend backend loadfire_backend option forwardfor # This sets X-Forwarded-For option httpclose server loadfire localhost:7101 maxconn 2048 It's really quite confusing for me why the behaviour appears to be "random", since being hard to reproduce it's hard to debug. I appreciate any insight on this.

  Read the article

• Server 2003 Terminal Services Printers not redirecting, no sessions created.

  - by mikerdz

  Ok, odd scenario on a Windows Server 2003 Server Standard running as Terminal Server. Friday, installed 2 new Windows 7 machines to replace older XP machines. After adding these machines and their local printers, none of the otehr 16 Windows 7 machines can redirect printing to the server. I have checked Global Policy on domain controller, nothing is being blocked. In Terminal Services Manager, the client settings are set to User Client Settings. On RDP client, port redirection is enabled. I have tried disabling the Use Client Settings option and manually selected the options for print redirection and default printer connection, but still does not work. After some reaserching, I found this MS article: http://support.microsoft.com/kb/2492632 I went ahead and added the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\Wds\rdpwd\fEnablePrintRDR DWORD that the article references and set it to "1" to enable the option. I restarted the server, but still would not print. I am getting quite desperate with this issue because nothing seems to have changed when installing the two new clients and printers. I uninstalled the print drivers for the printers from the server. I have even gone as far as connecting each of the printers manually via UPD (\computername\printer) but even thought it works, it prints awfully slow. Please help!!!!

  Read the article

• PC won't boot after hanging during Windows 8 automatic repair [closed]

  - by Mun

  I've got a custom built PC using an ASUS P5E motherboard and Intel Q6600 CPU. I plugged in my mp3 player to the USB port yesteday, and when I came back to the machine after about an hour or so, the Windows 8 automatic repair message was on the screen. It seemed to stick there for an hour, after which I decided to just hit reset and try and figure out what was going on. However, the machine rebooted to a black screen before even getting to the BIOS, with the monitor lights just blinking indicating there was no signal. Tried powering down completely, waiting a few minutes and then powering back up again with no difference; black screen with monitor lights blinking. Tried leaving it on for a while and then pinging from another machine or accessing it via something like LogMeIn, but everything showed the machine as being offline. There were also no error beeps or anything like that. Also tried unplugging all of the memory and rebooting and that also caused no error beeps. Removed one of the display cards and left the other one in there, and still only a black screen. I'm inclined to think that the motherboard or CPU is fried, but there is no indication of damage on any components and the CPU fan seems to be working fine as it always has, so overheating seems unlikely. It's also plugged into a surge protector. The motherboard also has a green light which still lights up. As everything was still working fine before hitting the reset button during Windows 8 automatic repair screen, at which point everything stopped working, it seems unlikely that this problem is down to component failure. Has anyone else experienced anything like this or have any ideas on what could be causing this behavior?

  Read the article

• Domain to apache, subdomain or subdirectory to tomcat

  - by hofmeister

  I set up an Apache2.2 and Tomcat7 Windows Server. Now I would like to use the domain for the apache and a subdomain or a subdirectory for the tomcat webapps. But I don’t know how to configure the httpd.conf. At the moment the httpd.conf looks like: <IfModule !mod_jk.c> LoadModule jk_module modules/mod_jk.so </IfModule> <IfModule mod_jk.c> JkWorkersFile conf/workers.jetty.properties JkLogFile logs/mod_jk.log JkLogLevel info JkLogStampFormat "[%a %b %d %H:%M:%S %Y]" JkOptions +ForwardKeySize +ForwardURICompat </IfModule> <VirtualHost servername:*> ServerName servername ServerAdmin [email protected] JkMount /* jetty </VirtualHost> My idea was to change the VirtualHost to sub.servername:* but this doesn’t work. How could I use a subdomain or directory for the webapps? At the moment, every call will me directed tomcat. My tomcat runs on the port 8081. Maybe edit the server.xml from tomcat? It would be awesome, if someone could help me. Greetz.

  Read the article

• How to set up that specific domains are tunneled to another server

  - by Peter Smit

  I am working at an university as research assistant. Often I would like to connect from home to university resources over http or ssh, but they are blocked from outside access. Therefore, they have a front-end ssh server where we can ssh into and from there to other hosts. For http access they advise to set up an ssh tunnel like this ssh -L 1234:proxyserver.university.fi:8080 publicsshserver.university.fi and put the proxy settings of your browser to point to port 1234 All nice and working, but I would not like to let all my other internet traffic go over this proxy server, and everytime I want to connect to the university I have to do this steps again. What would I like: - Set up a ssh tunnel everytime I log in my computer. I have a certificate, so no passwords are needed - Have a way to redirect some wildcard-domains always through the ssh-server first. So that when I type intra.university.fi in my browser, transparently the request is going through the tunnel. Same when I want to ssh into another resource within the university Is this possible? For the http part I think I maybe should set up my own local transparent proxy to have this easily done. How about the ssh part?

  Read the article

• Remote Desktop to Server 2008 fails from one particular Win7 client

  - by Jesse McGrew

  I have a VPS running Windows Web Server 2008 R2. I'm able to connect using Remote Desktop from my home PC (Windows 7), personal laptop (Windows 7), and work laptop (Windows XP). However, I cannot connect from my work PC (Windows 7). I receive the error "The logon attempt failed" in the RDP client, and the server event log shows "An account failed to log on" with this explanation: Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: username Account Domain: hostname Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc0000064 Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: JESSE-PC Source Network Address: - Source Port: - Detailed Authentication Information: Logon Process: NtLmSsp Authentication Package: NTLM Transited Services: - Package Name (NTLM only): - Key Length: 0 I can connect from the offending work PC if I start up Windows XP Mode and use the RDP client inside that. The server is part of a domain but my account is local, so I'm logging in using a username of the form hostname\username. None of the clients are part of a domain. The server uses a self-signed certificate, and connecting from home I get a warning about that, but connecting from work I just get the logon error.

  Read the article

• Why is OpenSSH not using the user specified in ssh_config?

  - by Jordan Evens

  I'm using OpenSSH from a Windows machine to connect to a Linux Mint 9 box. My Windows user name doesn't match the ssh target's user name, so I'm trying to specify the user to use for login using ssh_config. I know OpenSSH can see the ssh_config file since I'm specifying the identify file in it. The section specific to the host in ssh_config is: Host hostname HostName hostname IdentityFile ~/.ssh/id_dsa User username Compression yes If I do ssh username@hostname it works. Trying using ssh_config only gives: F:\>ssh -v hostname OpenSSH_5.6p1, OpenSSL 0.9.8o 01 Jun 2010 debug1: Connecting to hostname [XX.XX.XX.XX] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /cygdrive/f/progs/OpenSSH/home/.ssh/id_rsa type -1 debug1: identity file /cygdrive/f/progs/OpenSSH/home/.ssh/id_rsa-cert type -1 debug1: identity file /cygdrive/f/progs/OpenSSH/home/.ssh/id_dsa type 2 debug1: identity file /cygdrive/f/progs/OpenSSH/home/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3p1 Debia n-3ubuntu5 debug1: match: OpenSSH_5.3p1 Debian-3ubuntu5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'hostname' is known and matches the RSA host key. debug1: Found key in /cygdrive/f/progs/OpenSSH/home/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /cygdrive/f/progs/OpenSSH/home/.ssh/id_rsa debug1: Offering DSA public key: /cygdrive/f/progs/OpenSSH/home/.ssh/id_dsa debug1: Authentications that can continue: publickey debug1: No more authentication methods to try. Permission denied (publickey). I was under the impression that (as outlined in this question: How to make ssh log in as the right user?) specifying User username in ssh_config should work. Why isn't OpenSSH using the username specified in ssh_config?

  Read the article

• Windows 8 Internet Explorer proxy automation script

  - by Stefan Bollmann

  Similar to this post, I'd like to change my proxy settings using a script. However, it fails. When I am behind the proxy, IE does not connect to the internet. Here I try the first solution from craig: function FindProxyForURL(url, host) { if (isInNet(myIpAddress(), "myactualip", "myactualsubnetip")) return "PROXY proxyasshowninpicture:portihavetouseforthisproxy_see_picture"; else return "DIRECT"; } Also this test, where isInNet should surely return true does not help: function FindProxyForURL(url, host) { if (isInNet("myactualip", "myactualip", "myactualsubnetip")) return "PROXY proxyasshowninpicture:portihavetouseforthisproxy_see_picture"; else return "DIRECT"; } **This script is saved as proxy.pac in c:\windows and my configuration is* in LAN settings: No automatically detected settings, yes, use automatic config script: file://c:/windows/proxy.pac No proxy server. *(i am not allowed to post screenshots..) So, what am I doing wrong? ---------------- update -------------- However, when I set up a proxy in my LAN configurations: IE -> Internet Options -> Connections -> LAN Settings check: Use a proxy Server for your LAN Address: <a pingable proxy> Port: <portnr> everything is fine for this environment. Now I try a simpler script like function FindProxyForURL(url, host) { return "PROXY <pingable proxy>:<portnr>; DIRECT"; } With a configuration described above** I am not able to get through the proxy.

  Read the article

• How do I solve this error: ssh_exchange_identification: Connection closed by remote host

  - by bernie

  data@server01:~$ ssh [email protected] -vvv OpenSSH_5.5p1 Debian-6, OpenSSL 0.9.8o 01 Jun 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 10.7.4.1 [10.7.4.1] port 22. debug1: Connection established. debug3: Not a RSA1 key file /home/data/.ssh/id_rsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/data/.ssh/id_rsa type 1 debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-2048 debug1: Checking blacklist file /etc/ssh/blacklist.RSA-2048 debug1: identity file /home/data/.ssh/id_rsa-cert type -1 debug1: identity file /home/data/.ssh/id_dsa type -1 debug1: identity file /home/data/.ssh/id_dsa-cert type -1 ssh_exchange_identification: Connection closed by remote host

  Read the article

• Why won't dhclient use the static IP I'm telling it to request?

  - by mike

  Here's my /etc/dhcp3/dhclient.conf: request subnet-mask, broadcast-address, time-offset, routers, domain-name, domain-name-servers, domain-search, host-name, netbios-name-servers, netbios-scope, interface-mtu; timeout 60; reject 192.168.1.27; alias { interface "eth0"; fixed-address 192.168.1.222; } lease { interface "eth0"; fixed-address 192.168.1.222; option subnet-mask 255.255.255.0; option broadcast-address 255.255.255.255; option routers 192.168.1.254; option domain-name-servers 192.168.1.254; } When I run "dhclient eth0", I get this: There is already a pid file /var/run/dhclient.pid with pid 6511 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ wmaster0: unknown hardware address type 801 wmaster0: unknown hardware address type 801 Listening on LPF/eth0/00:1c:25:97:82:20 Sending on LPF/eth0/00:1c:25:97:82:20 Sending on Socket/fallback DHCPREQUEST of 192.168.1.27 on eth0 to 255.255.255.255 port 67 DHCPACK of 192.168.1.27 from 192.168.1.254 bound to 192.168.1.27 -- renewal in 1468 seconds. I used strace to make sure that dhclient really is reading that conf file. Why isn't it paying attention to my "reject 192.168.1.27" and "fixed-address 192.168.1.222" lines?

  Read the article

• Can't login to phpMyAdmin on a WAMP server running Windows 2008

  - by Richard West

  I am setting up a new server. I have installed Apache 2.2.17, PHP 5.3.3, MySQL 5.1.53 and phpMyAdmin 3.3.8 running on a Windows 2008 (32 bit) OS. I have configured Apache and PHP so they appear to be working fine. I have created the standard test php page with the following code and everything appears to be working fine. <?php //index.php phpinfo(); ?> I also see the mySQL and mySQLi section in the above webpage, so it appears that that I have the proper extensions loaded for mySQL access. The problem that I am having centeres around myPHPAdmin. I have this installed and I can access to the login screen at http://localhost/pma I login using "root" and the password I have setup for root. After a delay of 30 seconds or so the web page goes to a blank screen, and the url is now http://localhost/pma/index.php?token= No error is ever displayed - however nothing usable is either. I have confirmed that mySQL is running by going to the command line and logging into mySQL from there. I have double checked my configuration but I am not having any luck getting this to work. I have also disabled the Windows firewall, but that did not change anything. I installed mySQL using the standard port 3306. Any advice would be greatly appreciated.

  Read the article

< Previous Page | 413 414 415 416 417 418 419 420 421 422 423 424  | Next Page >