Search Results

Search found 18728 results on 750 pages for 'setup deployment'.

Page 419/750 | < Previous Page | 415 416 417 418 419 420 421 422 423 424 425 426  | Next Page >

• Why do msi installations use slower drives over faster ones in windows 7?

  - by Joshua C

  I have noticed that the slowest drive in my system is used most during an msi installation. I mainly notice this when running windows updates but it seems to be msi installs in general. The setup I last saw this occur on was running Windows 7 with the following drives: Sata: 240GB SSD NTFS ~515MB/s Operating system drive 1TB NTFS ~110MB/s Firewire: 4TB ExFAT ~80MB/s I would think that windows would choose the fastest drive with available space for temporary files. But it will instead choose the external drive with the slowest transfer speed. I could also understand choosing the 1TB for not being an ssd in an attempt to preserve the longevity of the ssd write capacity. Why does this happen? Is there a way to force these installations to use the OS drive or a specific drive?

  Read the article

• Radeon 5850 Why am I not getting 3 monitors up as a choice ??

  - by Jan

  Ive just bought the top end ATI Radeon card with 2 normal monitor ports and a HDMI. The idea was to continue using my dual screen setup as always and to use the last plug, the HDMI on my TV. I got a new 52 inch HD TV with all the necessary bits. This should work fine. But.. in Display Properties I still get only my 2 monitors up as options. Not the Digital TV. When I unplug 1 monitor and restart the computer, I get the TV and the other monitor. But never all 3 at the same time. Why is this ? Where can I go to tell it that I need all 3 screens at the same time. Also I get a message saying my gfx card also gives sound through the HDMI cable.. But the TV tells me its recieving a sound format that it does not understand. Any ideas on that too while were at it ?

  Read the article

• Problem with Jumbo Frames

  - by Spookyone

  Hello, I am trying to set up jumbo frames on my gigabit home LAN but no luck so far. My setup is: * D-Link DIR-655 router, HW Revision A3, Firmware 1.21 EU * Synology DS107+, Firmware 3.0-1337 * Laptop w/ Win7 x64, external PCIx NIC managed by "Generic Marvel Yukon 88E8053 based Ethernet Controller" The router is supposed to support jumbo frames but doesn't feature any relevant setting. I set the Jumbo Packet value to 9000 on both the NIC and the Synobox but it doesn't work, ping -f -l 8972 says "Packet needs to be fragmented but DF set". Is there any other setting I overlooked, the DIR-655 doesn't actually support jumbo frames, or what else could be the problem?

  Read the article

• VMware Workstation 9 Security Best Practice Guides

  - by slickboy

  Could someone please point me in the direction of where I could find some best practice securiy guides for VMware Workstation 9 please? I've searched the VMware site and to say it's badly organised is an understatement! I've been able to find general setup guides but nothing with a specific focus on security. I'm also wondering is there any best practice guides that I should follow when installing Windows 7 Professional and Windows Server 2008 R2 on VMware Workstation 9? I obviously will be implementing Microsofts recommended security best practices but I'd be very interested in any recommendations for virtualizing these operating systems. Any help is much appreciated.

  Read the article

• Keep printed documents on Windows Server 2008 R2 Print Server

  - by MadBoy

  I've setup Windows 2008 R2 as print server. I have checked option Keep printed document option for all printers and it works fine. Users print their stuff and i can see what they are doing. Problem is everyone sees all documents that are getting printed which is not always the best idea. Is there a way to: Limit print jobs to be only seen by people who printed them and admins Limit print jobs to be only seen on server (from within Server Manager) and so print jobs dissapear when print job is done from user queue (but then admins are still able to see it and track what's printed and when for reporting purposes). Create some kind of access level list so that some people can see everything geting printed, some people see their print jobs and some people see nothing :-)

  Read the article

• Lost in Translation – Common Mistakes Interpreting Patterns – Mark Simpson, Griffiths-Waite @ SOA, Cloud & Service Technology Symposium 2012

  - by JuergenKress

  ORACLE PROMOTIONAL DISCOUNT FOR EXCLUSIVE ORACLE DISCOUNT, ENTER PROMO CODE: DJMXZ370 For details please visit the registration page International SOA, Cloud + Service Technology Symposium is a yearly event that features the top experts and authors from around the world, providing a series of keynotes, talks, demonstrations, and panels, as well as training and certification workshops - all dedicated to empowering IT professionals to realize modern service technologies and practices in the real world. Click here for a two-page printable conference overview (PDF). Speaker: Mark Simpson, Griffiths-Waite Mark has been specialising in Oracle technology for 13 years, the last 10 of these with Griffiths Waite. Mark leads our SOA technology practice (covering SOA, Business Process Management and Enterprise Architecture). He is a much sought after presenter on the Oracle and SOA conference circuits, and a respected authority on these technologies. Mark has advised a host of UK leading organisations on the deployment of BPM / SOA solutions. Working closely with Oracle US Product Development Mark has contributed to Oracle's SOA Methodology and Oracle's SOA Maturity Model. Lost in Translation – Common Mistakes Interpreting Patterns Learn how small misinterpretations of high-level design patterns can have large and costly project ramifications. Good SOA design benefits from the use of a reference architecture and standardised design patterns. However both of these concepts give an abstracted view of the intended solution, which needs to be interpreted to become realised. A reference implementation is important to demonstrate how key design guidelines can be implemented in the toolset of choice, but the main success factor is how these are used through the build and post live phases of the project. This session will introduce practical design patterns with supporting implementation examples that, if used correctly, will give long term benefit. We will highlight implementations where misinterpretations or misalignment from pattern aims have led to issues post implementation. The session will add depth to the pattern discussions you are already having enabling confidence in proceeding to the next level of realisation whilst considering how they may be implemented within your solution and chosen toolset. September 25, 2012 - 13:55 KEYNOTES & SPEAKERS More than 80 international subject matter experts will be speaking at the Symposium. Below are confirmed keynotes and speakers so far. Over 50% of the agenda has not yet been finalized. Many more speakers to come. View the partial program calendars on the Conference Agenda page. CONFERENCE THEMES & TRACKS Cloud Computing Architecture & Patterns New SOA & Service-Orientation Practices & Models Emerging Service Technology Innovation Service Modeling & Analysis Techniques Service Infrastructure & Virtualization Cloud-based Enterprise Architecture Business Planning for Cloud Computing Projects Real World Case Studies Semantic Web Technologies (with & without the Cloud) Governance Frameworks for SOA and/or Cloud Computing Projects Service Engineering & Service Programming Techniques Interactive Services & the Human Factor New REST & Web Services Tools & Techniques Oracle Specialized SOA & BPM Partners Oracle Specialized partners have proven their skills by certifications and customer references. To find a local Specialized partner please visit http://solutions.oracle.com SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: Mark Simpson,Griffiths Waite,SOA Patterns,SOA Symposium,Thomas Erl,SOA Community,Oracle SOA,Oracle BPM,BPM,Community,OPN,Jürgen Kress

  Read the article

• Booting from e-sata drive

  - by petersohn

  I have a HP EliteBook laptop (don't know exact product number), which has an internal hard drive with Windows installed on it. I have an external hard drive with e-sata and USB ports, linux installed on it. When I try to boot from the external drive, it works if I use USB but not if I use e-sata. In the BIOS setup, I have the following boot order set: External SATA drive USB Hard Drive Notebook Upgrade Bay Notebook Hard Drive etc. When I boot from another drive (such as the internal hard drive or from CD-ROM), and have the e-sata cable connected, it works perfectly. Is there any way to boot from the e-sata drive?

  Read the article

• Permanent Routes Centos Questions

  - by user65053

  So with a little help I figured out how to setup these routes and I can set them in rc.local route add -net 208.82.236.0 netmask 255.255.255.0 dev ppp0 metric 1 route add -net 208.82.236.0 netmask 255.255.255.0 dev eth0 metric 10 my question is being that the first route is ppp0 as soon as I disconnect the modem the route is dropped how do I maintain the route or make it permanent so that next time the modem connects it will follow the route. Currently after ppp0 disconnects the route is dropped netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface laxapx03.o1.com * 255.255.255.255 UH 0 0 0 ppp0 208.82.236.0 * 255.255.255.0 U 0 0 0 eth0 10.0.1.0 * 255.255.255.0 U 0 0 0 eth0 169.254.0.0 * 255.255.0.0 U 0 0 0 eth0 default 10.0.1.1 0.0.0.0 UG 0 0 0 eth0

  Read the article

• can't configure openfire

  - by SnOrfus

  I'm trying to setup openfire on one of the servers here and I've gone through the windows installer, installed the service, started the service and I can't connect to the admin console. If I go to http://127.0.0.1:9090 (or http://127.0.0.1/index.html) all I get is a blank page. I also tried running the GUI instead of the service, and it said that it was listening on 127.0.0.1:9090 and when I navigate there or click "launch admin" I still get a blank page. What could be the problem? It's a windows server 2k3 machine with IIS running (runs a couple of other sites). edit openfire 3.6.4 I installed on my local machine without problems, so it's obviously something on the server that's causing it. There is no firewall installed on that server so I'm not sure what would be stopping it.

  Read the article

• Wireless Repeating with two Netgear N750 (WNDR4300)

  - by jomo1911

  I have a Netgear N750 as my main router, which connects to the internet via a modem. I have a second Netgear N750 which I want to use to repeat the wireless signal of the main router. I logged in to routerlogin of my main router (192.168.1.1) and set up the "Wireless Repeating Function". I set it as the "Wireless Base Station" and filled in the MAC adress of my second Netgear N750. Then I logged in to routerlogin of my second router and set it up as the "Wireless Repeater", I gave it the IP 192.168.1.11 and filled in the MAC adress of the base station. During the setup of the second router (Repeater) I had to disable all security functions. If I connect to the repeaters' WLAN signal, I get no internet connection. Maybe you can help me, thanks

  Read the article

• How to check system performance?

  - by Woltan

  Hi all, I am a new Ubuntu user and really like the look and the features of the OS. However, I have a feeling that the performance could be better. With that I mean: Somehow the scrolling within firefox of sites seems laggy. I do not know how I should measure it but there is a difference. Not that it is unusable but it is aggravating. Java programs are running really slow. As a comparison (I know it is not a fair one), I tried to run a game using wine. The graphic specifications using windows were much higher (1600x1200) with a high level of detail, and in ubuntu with the lowest level of detail 1024x768 was the maximum. (My graphics card is a GeForce GTS 450 with 1gb RAM) Coming to my question: Is there a way to measure the performance of 3D acceleration, java applets, firefox scrolling etc. with a tool and compare it with lets say a windows OS or other users having almost the same hardware? Maybe it is a setup issue where some fundamental drivers are missing or something!? Any help, link, suggestion is appreciated! Cherio Woltan

  Read the article

• AZURE - Stairway To Heaven

  - by Waclaw Chrabaszcz

  Originally posted on: http://geekswithblogs.net/Wchrabaszcz/archive/2014/08/02/azure---stairway-to-heaven.aspx  Before you’ll start reading please start to play this song.   OK boys and girls, time get familiar with clouds. Time to become a meteorologist. To be honest I don’t know how to start. Is cloud better or worse than on campus resources … hmm … it is just different. I think for successful adoption in cloud world IT Dinosaurs need to forget some “Private Cloud” virtualization bad habits, and learn new way of thinking. Take a look: - I don’t need any  tapes or  CDs  (Physical Kingdom of Windows XP and 2000) - I don’t need any locally stored MP3s (CD virtualization :-) - I can just stream music to your computer no matter whether my on-site infrastructure is powered on. Why not to do exactly the same with WebServer, SQL, or just rented for a while Windows server ? Let’s go, to the other side of the mirror. 1st  - register yourself for free one month trial, as happy MSDN subscriber you’ve got monthly budget to spent. In addition in default setting your limit protects you against loosing real money, if your toys will consume too much traffic and space. http://azure.microsoft.com/en-us/pricing/free-trial/ Once your account is ready forget WebPortal, we are PowerShell knights. http://go.microsoft.com/?linkid=9811175&clcid=0x409 #Authenticate yourself in Azure Add-AzureAccount #download once your settings file Get-AzurePublishSettingsFile #Import it to your PowerShell Module Import-AzurePublishSettingsFile "C:\Azure\[filename].publishsettings" #validation Get-AzureAccount Get-AzureSubscription #where are Azure datacenters Get-AzureLocation #You will need it Update-Help #storage account is related to physical location, there are two datacenters on each continent, try nearest to you # all your VMs will store VHD files on your storage account #your storage account must be unique globally, so I assume that words account or server are already used New-AzureStorageAccount -StorageAccountName "[YOUR_STORAGE_ACCOUNT]" -Label "AzureTwo" -Location "West Europe" Get-AzureStorageAccount #it looks like you are ready to deploy first VM, what templates we can use Get-AzureVMImage | Select ImageName #what a mess, let’s choose Server 2012 $ImageName = (Get-AzureVMImage)[74].ImageName $cloudSvcName = '[YOUR_STORAGE_ACCOUNT]' $AdminUsername = "[YOUR-ADMIN]" $adminPassword = '[YOUR_PA$$W0RD]' $MediaLocation = "West Europe" $vmnameDC = 'DC01' #burn baby burn !!! $vmDC01 = New-AzureVMConfig -Name $vmnameDC -InstanceSize "Small" -ImageName $ImageName   `     | Add-AzureProvisioningConfig -Windows -Password $adminPassword -AdminUsername $AdminUsername   `     | New-AzureVM -ServiceName $cloudSvcName #ice, ice baby … Get-AzureVM Get-AzureRemoteDesktopFile -ServiceName "[YOUR_STORAGE_ACCOUNT]" -Name "DC01" -LocalPath "c:\AZURE\DC01.rdp" As you can see it is not just a new-VM, you need to associate your VM with AzureVMConfig (it sets your template), AzureProvisioningConfig (it sets your customizations), and Storage account. In next releases you’ll need to put this machine in specific subnet, attach a HDD and many more. After second reading I found that I am using the same name for STORAGE and SERVICE account, please be aware of it if you need to split these values. Conclusions: - pipe rules ! - at the beginning it is hard to change your mind and agree with fact that it is easier to remove and recreate a VM than move it to different subnet - by default everything is firewalled, limited access to DNS, but NATed outside on custom ports. It is good to check these translations sometimes on the webportal. - if you remove your VMs your harddrives remains on storage and MS will charge you . Remove-AzureVM -DeleteVHD For me AZURE it is a lot of fun, once again I can be newbie and learn every page. For me Azure offers real freedom in deployment of VMs without arguing with NetAdmins, WinAdmins, DBAs, PMs and other Change Managers. Unfortunately soon or later they will come to my haven and change it into …

  Read the article

• Switching from Amazon EC2 instance-store to EBS Volume

  - by Adam

  Hi, I have an Amazon EC2 instance that is using an instance-store as its root device. It has no EBS volumes attached to it. It has a database and a running web application on it. If I understand correctly this is a bad setup as I would lose all the data on the instance if it were to reboot. I would like to correct this mistake. I'd like to move all the data on the running instance to a new EBS volume and make that new volume the root device. How do I go about doing this? Thanks!

  Read the article

• Can't connect to Apple Time Capsule in home network using Home Plugs from Win 7 Machine

  - by Eugene

  I have the following home network setup with subnet 255.255.255.0 but recently moved my time capsule to a different location when I added a third Home Plug and can no longer ping or map a network drive to it from the Windows 7 Machine. However using Airport Utility on the Windows 7 machine I can manually configure the Time Capsule. Using a Macbook on WIFI Network 1 or 2 - I can backup to the time capsule, so its accessible via both the router wifi network and the time capsule wifi network. The Time Capsule is set to BRIDGE function - ie no NAT or DHCP server enabled. Any bright sparks out there that can help diagnose the problem? Router (192.168.1.254) WIFI Network 1 | | |---- Home Plug one |---- Home Plug Two | |---- Computer A Windows 7 (192.168.1.160) | |---- Printer (192.168.1.69) |---- Home Plug Three | |---- Apple Time Capsule (192.168.1.150) WIFI Network 2 |---- Smart TV (192.168.1.70) | |---- Apple TV (192.168.1.4)

  Read the article

• Compiling the Linux kernel, how much size is needed?

  - by ant2009

  I have downloaded the newest most stable Linux kernel, 2.6.33.2. I thought I would test this using VirtualBox. So I create a dynamically sized harddisk of 4 GB. And installed CentOS 5.3 with just the minimum packages. I setup the make menuconfig with just the default settings. After that I ran make and got the following error: net/bluetooth/hci_sysfs.o: final close failed: No space left on device make[2]: *** [net/bluetooth/hci_sysfs.o] Error 1 make[1]: *** [net/bluetooth] Error 2 make: *** [net] Error 2 The amount of space I have left is: # df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 3.3G 3.3G 0 100% / /dev/hda1 99M 12M 82M 13% /boot tmpfs 125M 0 125M 0% /dev/shm My virtual size is 4 GB, but the actual size is 3.5 GB. $ ls -hl total 7.5G -rw-------. 1 root root 3.5G 2010-04-13 14:08 LFS.vdi How much size should I give when compiling and installing a Linux kernel? Are there any guidelines to follow when doing this? This is my first time, so just experimenting with this.

  Read the article

• Disk full, du tells different. How to further investigate?

  - by initall

  I have a SCSI disk in a server (hardware Raid 1), 32G, ext3 filesytem. df tells me that the disk is 100% full. If I delete 1G this is correctly shown. However, if I run a du -h -x / then du tells me that only 12G are used (I use -x because of some Samba mounts). So my question is not about subtle differences between the du and df commands but about how I can find out what causes this huge difference? I rebooted the machine for a fsck that went w/out errors. Should I run badblocks? lsof shows me no open deleted files, lost+found is empty and there is no obvious warn/err/fail statement in the messages file. Feel free to ask for further details of the setup.

  Read the article

• Invitation: HARNESSING THE POWER OF FUSION

  - by mseika

  HARNESSING THE POWER OF FUSION: IMPLEMENT AND EXTEND ORACLE'S NEXT-GENERATION APPLICATIONS TO MEET CHANGING CLIENT NEEDSBRUSSELS, BELGIUM, APRIL 23RD, 2012 - APRIL 24th, 2012 The pace of business continues to accelerate. Clients demand solutions that not only meet their needs today, but evolve as quickly as markets, competition and technology. Oracle Fusion Applications can help you to anticipate and satisfy your clients changing needs. Designed for an era of business disruption, they co-exist with existing IT investments, but leverage new technologies (such as mobility and SOA) and breakthrough Cloud computing delivery models as you need them. They also support unprecedented levels of extensibility. To show you how, Oracle's Product Development organization invites you to join an exclusive Fusion Applications presentation and demonstration event for Oracle partners in Europe. This intensive 2-day event will illustrate Fusion Applications capabilities that can enhance ROI for your clients across four major product families: Financials, Procurement and Project Portfolio Management (ERP) Customer Relationship Management (CRM) Human Capital Management (HCM) Supply Chain Management (SCM) Led by Oracle Product Development personnel, this event will also demonstrate how to extend the Fusion Applications user experience, data model, business process and reporting using new Functional Setup and Composer technologies. These can help you address unique client needs without impacting future upgrades. This presentation and demonstration event is intended for consulting business development and delivery personnel. Reserve your Seats today for April 23rd - 24th event To register to this event CLICK HERE For further information please contact me at [email protected]. Best regards Paul ThompsonSenior Director EMEA Alliances and Solutions Partner Programs Markku RouhiainenDirector, Applications Partner EnablementWestern Europe

  Read the article

• Invitation: HARNESSING THE POWER OF FUSION

  - by mseika

  HARNESSING THE POWER OF FUSION: IMPLEMENT AND EXTEND ORACLE'S NEXT-GENERATION APPLICATIONS TO MEET CHANGING CLIENT NEEDSBRUSSELS, BELGIUM, APRIL 23RD, 2012 - APRIL 24th, 2012 The pace of business continues to accelerate. Clients demand solutions that not only meet their needs today, but evolve as quickly as markets, competition and technology. Oracle Fusion Applications can help you to anticipate and satisfy your clients changing needs. Designed for an era of business disruption, they co-exist with existing IT investments, but leverage new technologies (such as mobility and SOA) and breakthrough Cloud computing delivery models as you need them. They also support unprecedented levels of extensibility. To show you how, Oracle's Product Development organization invites you to join an exclusive Fusion Applications presentation and demonstration event for Oracle partners in Europe. This intensive 2-day event will illustrate Fusion Applications capabilities that can enhance ROI for your clients across four major product families: Financials, Procurement and Project Portfolio Management (ERP) Customer Relationship Management (CRM) Human Capital Management (HCM) Supply Chain Management (SCM) Led by Oracle Product Development personnel, this event will also demonstrate how to extend the Fusion Applications user experience, data model, business process and reporting using new Functional Setup and Composer technologies. These can help you address unique client needs without impacting future upgrades. This presentation and demonstration event is intended for consulting business development and delivery personnel. Reserve your Seats today for April 23rd - 24th event To register to this event CLICK HERE For further information please contact me at [email protected]. Best regards Paul ThompsonSenior Director EMEA Alliances and Solutions Partner Programs Markku RouhiainenDirector, Applications Partner EnablementWestern Europe

  Read the article

• Partner Blog: Hub City Media Introduces iPad Application for Oracle Identity Analytics

  - by Tanu Sood

  About the Writer:Steve Giovannetti is CTO of Hub City Media, Inc., a company that specializes in implementation and product development on the Oracle Identity Management platform. Recently, Hub City Media announced the introduction of iPad application IdentityCert for Oracle Identity Analytics. This post explore the business use cases and application of IdentityCert.Hub City Media(HCM) has been deploying certification solutions based on Oracle Identity Analytics since it first appeared on the market as Vaau RBACx. With each deployment we've seen the same pattern repeat time and time again:1. Customers suffering under the weight of manual access certification regimens deploy Oracle Identity Analytics (OIA) for automated certification. 2. OIA improves the frequency, speed, accuracy, and participation of certifications across the organization. 3. Then the certifiers, typically managers and supervisors, ask, “Is there any easier way to do these certifications offline?”The current version of OIA has a way to export certification data to a spreadsheet.  For some customers, we've leveraged this feature and combined it with some of our own custom code to provide a solution based on spreadsheet exports and imports.  Customers export the certification to Microsoft Excel, complete it, and then import the spreadsheet to OIA. It worked well for offline certification, but if the user accidentally altered the format of the spreadsheet, the import of the data could fail. We were close to a solution but it wasn’t reliable.Over the past few years, we've seen the proliferation of Apple iOS devices, specifically the iPhone and iPad, in the enterprise.  As our customers were asking for offline certification, we noticed the same population of users traditionally responsible for access certification, were early adopters of the iPad. The environment seemed ideal for us to create an iPad application to support offline certifications using Oracle Identity Analytics. That’s why we created IdentityCert™.IdentityCert allows users to view their analytics dashboard, complete user certifications, and resolve policy violations with OIA, from their iPads.The current IdentityCert analytics dashboard displays the same charts that are available in the Oracle Identity Analytics product. However, we plan to expand the number of available analytics in future releases.The main function of IdentityCert is user certification which can be performed quickly and efficiently using a simple touch interface. Managers tap into a certification, use simple gestures to claim users and certify their access.  Certifications can be securely downloaded to IdentityCert and can be completed with or without a network connection. The user can upload the completed certifications once they are connected to a cellular or wi-fi network.Oracle Identity Analytics can generate policy violation notifications based on detective scans of identity warehouse or via preventative analysis of identity access requests. IdentityCert allows users to view all policy violations, resolve, or delegate them to appropriate users. IdentityCert also analyzes the policy violation expression and produces more human friendly descriptions of the policy violation which improves the ability of users to resolve the violation. IdentityCert can be deployed quickly into a customer's environment. It is deployed with Hub City Media's ID Services to connect Oracle Identity Analytics securely with the iPad application.Oracle Identity Management 11g R2 is an important evolutionary release. Oracle's Identity Management suite has more characteristics of a cohesive platform. This platform provides an integrated set of identity services that can be used to protect, manage, and audit security within the enterprise. At HCM we take the platform concept a step further and see it as an opportunity to create unique solutions for Oracle Identity Management customers. IdentityCert is our commitment to this platform. You can download IdentityCert from the Apple iOS App Store today. It includes a demo dataset that you can use to explore the functions of the product without any server infrastructure. Download it. Give it a try. We would appreciate your interest and welcome any feedback.Resources:Press Release: Hub City Media Introduces iPad Application IdentityCert™ for Oracle Identity AnalyticsApp Store Download: http://bit.ly/IdentityCertOracle Identity Governance Suite

  Read the article

• Craftsmanship Tour Day 1: Didit Long Island

  - by Liam McLennan

  On Monday I was at Didit for my first ever craftsmanship visit. Didit seem to occupy a good part of a non-descript building in Rockville Centre Long Island. Since I had arrived early from Seattle I had some time to kill, so I stopped at the Rockville Diner on the corner of N Park Ave and Sunrise Hwy. I thoroughly enjoyed the pancakes and the friendly service. After walking to the Didit office I met Rik Dryfoos, the Didit Engineering Manager who organised my visit, and got the introduction to Didit and the work they are doing. I spent the morning in the room shared by the Didit developers, who are working on some fascinating deep engineering problems. After lunch at a local Thai place I setup a webcam to record an interview with Rik and Matt Roman (Didit VP of Engineering). I had a lot of trouble with the webcam, including losing several minutes of conversation, but in the end I was very happy the result. Here are the full interviews with Rik and Matt: Interview with Rik Dryfoos Interview with Matt Roman We had a great chat, much of which is captured in the recording. It was such great conversation that I almost missed my train to Manhattan. I’m sure Didit will continue to do well with such a dedicated and enthusiastic team. I sincerely thank them for hosting me for the day. If you are looking for a true agile environment and the opportunity to work with a high quality team then you should talk to Didit.

  Read the article

• postgres memory allocation tuning 2

  - by pstanton

  i've got a Ubuntu Linux system with 12Gb memory most of which (at least 10Gb) can be allocated solely to postgres. the system also has a 6 disk 15k SCSI RAID 10 setup. The process i'm trying to optimise is twofold. firstly a single threaded, single connection will do many inserts into 2-4 tables linked by foreign key. secondly many different complex queries are run against the resulting data, using group by extensively. this part especially needs to be optimised. i have four of these processes running at once in order to make use of the quad core CPU, therefore there will generally be no more than 5 concurrent connections (1 spare for admin tasks). what configuration changes to the default Postgres config would you recommend? I'm looking for the optimum values for things like work_mem, shared_buffers etc. relevant doco thanks!

  Read the article

• Considering building a new system; but undecided about chassis

  - by J.C. Bengtson

  I'm considering a new system build, and was thinking that this particular motherboard has features I need and like: http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=667651&pagenumber=1&RSort=1&csid=ITD&recordsPerPage=5&body=REVIEWS#CustomerReviewsBlock .. but am unsure which model chassis to pair it with. I'd strongly prefer something from Cooler Master, as I'm a fan of their products, but am having a hard time deciding, and also don't want to get into some odd situation where the board doesn't properly fit. I plan on having two optical drives (5.25"), two internal HDs (3.5"), and will likely go with an SLI setup of 2 or possibly even 3 cards, so I'd need a chassis that is roomy enough to accomodate all of that, as well as the motherboard itself. Based on the stock available at that same site, do you all have any suggestions? The larger, the better, as I hate having components crammed together. Your help is most appreciated!

  Read the article

• Demantra Performance Clustering Factor Out of Order Ratio TABLE_REORG CHECK_REORG (Doc ID 1594372.1)

  - by user702295

  Hello!   There is a new document available: Demantra Performance Clustering Factor Out of Order Ratio TABLE_REORG CHECK_REORG (Doc ID 1594372.1) Demantra Performance Clustering Factor Out of Order Ratio TABLE_REORG CHECK_REORG The table reorganization can be setup to automatically run in version 7.3.1.5.  In version 12.2.2 we run the TABLE_REORG.CHECK_REORG function at every appserver restart. If the function recommends a reorg then we strongly encourage to reorg the database object.  This is documented in the official docs. In versions 7.3.1.3 and 7.3.1.4, the TABLE_REORG module exists and can be used. It has two main functions that are documented in the Implementation Guide Supplement, Release 7.3, Part No. E26760-03, chapter 4. In short, if you are using version 7.3.1.3 or higher, you can check for the need to run a reorg by doing the following 2 steps: 1. Run TABLE_REORG.CHECK_REORG('T'); 2. Check the table LOG_TABLE_REORG for recommendations If you are on a version before 7.3.1.3, you will need to follow the instructions below to determine if you need to do a manual reorg. How to determine if a table reorg is needed 1. It is strongly encouraged by DEV that You gather statistics on the required table.  The prefered percentage for the gather is 100%. 2. Run the following SQL to evaluate how table reorg might affect Primary Key (PK) based access:   SELECT ui.index_name,trunc((ut.num_rows/ui.clustering_factor)/(ut.num_rows/ut.blocks),2) FROM user_indexes ui, user_tables ut, user_constraints uc WHERE ui.table_name=ut.table_name AND ut.table_name=uc.table_name AND ui.index_name=uc.index_name AND UC.CONSTRAINT_TYPE='P' AND ut.table_name=upper('&enter_table_name');   3. Based on the result: VALUE ABOVE 0.75 - DOES NOT REQUIRE REORG VALUE BETWEEN 0.5 AND 0.75 - REORG IS RECOMMENDED VALUE LOWER THAN 0.5 - IT IS HIGHLY RECOMMENDED TO REORG

  Read the article

• Apache2 alias in virtual host

  - by 0x7c00

  I have multiple virtual host in one server and plan to has some alias setup in one virtualhost. So I add the Alias /foo/ /path/to/foo/ in virtualhost directive,but it has no effect. request of host1/foo/ will return 404. But if I add this to /etc/apache2/mods-available/alias.conf, it works. But the problem is host2 will also share this alias. Is there a way to make the alias work only for host1? B.T.W, I use apache2ctl -l, there's no mod_alias.c listed, weird.

  Read the article

• vqadmin "invalid language file" with google chrome

  - by MrStatic

  We have been running our qmail setup for awhile with no issues. One of our admins has moved to Google Chrome as his main browser and we have noticed something odd. No matter what, when he loads the vqadmin page it errors on him with simply invalid language file. Yet if he loads Firefox, Opera, Safari or shudders IE8 it works fine. Searching google only results in 'Use IE' or 'Set english as your language in the browser'. A: I try to have people avoid IE if possible and B: There is no english option in Chrome.

  Read the article

< Previous Page | 415 416 417 418 419 420 421 422 423 424 425 426  | Next Page >