Search Results

Search found 29612 results on 1185 pages for 'script console'.

Page 420/1185 | < Previous Page | 416 417 418 419 420 421 422 423 424 425 426 427  | Next Page >

• Installed Ubuntu 14.04LTS

  - by user291729

  On my laptop which came pre-installed with Windows 8.1. Felt I needed to see the competition for myself to establish which was a better OS. So I followed the channels to dual boot. All seemed fine and I accessed Ubuntu with no issues after selecting this from the menu to select the OS. I should add that the boot method was changed to legacy. However, since using Ubuntu, I no longer have the ability to select the OS. The laptop simply logs straight into Ubuntu. I therefore attempted to access the recovery options, only it appears the Windows 8 bootloader has somehow been corrupted as I am now told to use the Windows 8 recovery disc (which, as this was pre-installed - I do not have). Left with no other alternative, I have scoured these forums without success, and so I am hoping someone in the know (or who has experienced similar) can help. I have tried boot repair again without success. On rebooting I am only presented with a basic splash screen asking me to select Ubuntu, Memtest, Windows 8 Recovery or Windows 8 Bootloader (The bootloaders again require I insert the disc). I have tried Code: cat /boot/grub/grub.cfg df -h sudo fdisk -l cat /proc/partitions # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi if [ "${next_entry}" ] ; then set default="${next_entry}" set next_entry= save_env next_entry set boot_once=true else set default="0" fi if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=800x600 load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ] ; then set timeout=-1 else if [ x$feature_timeout_style = xy ] ; then set timeout_style=menu set timeout=20 # Fallback normal timeout code in case the timeout_style feature is # unavailable. else set timeout=20 fi fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff initrd /boot/initrd.img-3.13.0-29-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { menuentry 'Ubuntu, with Linux 3.13.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry 'Memory test (memtest86+)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi knetbsd /boot/memtest86+.elf } menuentry 'Memory test (memtest86+, serial console 115200)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry 'Windows Recovery Environment (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-7A6A69D66A698FA5' { insmod part_gpt insmod ntfs set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7A6A69D66A698FA5 else search --no-floppy --fs-uuid --set=root 7A6A69D66A698FA5 fi drivemap -s (hd0) ${root} chainloader +1 } menuentry 'Windows 8 (loader) (on /dev/sda3)' --class windows --class os $menuentry_id_option 'osprober-chain-8C88-80F7' { insmod part_gpt insmod fat set root='hd0,gpt3' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 8C88-80F7 else search --no-floppy --fs-uuid --set=root 8C88-80F7 fi drivemap -s (hd0) ${root} chainloader +1 } set timeout_style=menu if [ "${timeout}" = 0 ]; then set timeout=10 fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi if [ "${next_entry}" ] ; then set default="${next_entry}" set next_entry= save_env next_entry set boot_once=true else set default="0" fi if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=800x600 load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ] ; then set timeout=-1 else if [ x$feature_timeout_style = xy ] ; then set timeout_style=menu set timeout=20 # Fallback normal timeout code in case the timeout_style feature is # unavailable. else set timeout=20 fi fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff initrd /boot/initrd.img-3.13.0-29-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { menuentry 'Ubuntu, with Linux 3.13.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry 'Memory test (memtest86+)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi knetbsd /boot/memtest86+.elf } menuentry 'Memory test (memtest86+, serial console 115200)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry 'Windows Recovery Environment (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-7A6A69D66A698FA5' { insmod part_gpt insmod ntfs set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7A6A69D66A698FA5 else search --no-floppy --fs-uuid --set=root 7A6A69D66A698FA5 fi drivemap -s (hd0) ${root} chainloader +1 } menuentry 'Windows 8 (loader) (on /dev/sda3)' --class windows --class os $menuentry_id_option 'osprober-chain-8C88-80F7' { insmod part_gpt insmod fat set root='hd0,gpt3' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 8C88-80F7 else search --no-floppy --fs-uuid --set=root 8C88-80F7 fi drivemap -s (hd0) ${root} chainloader +1 } set timeout_style=menu if [ "${timeout}" = 0 ]; then set timeout=10 fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### john@john-SVE1713Y1EB:~$ ^C john@john-SVE1713Y1EB:~$ ^C john@john-SVE1713Y1EB:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda9 84G 7.1G 73G 9% / none 4.0K 0 4.0K 0% /sys/fs/cgroup udev 3.9G 4.0K 3.9G 1% /dev tmpfs 794M 1.4M 793M 1% /run none 5.0M 0 5.0M 0% /run/lock none 3.9G 80K 3.9G 1% /run/shm none 100M 52K 100M 1% /run/user /dev/sdc1 7.5G 2.2G 5.4G 29% /media/john/DYLANMUSIC /dev/sr0 964M 964M 0 100% /media/john/Ubuntu 14.04 LTS amd64 /dev/sdb1 1.9T 892G 972G 48% /media/john/Storage Main WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x4e2ccf75 Device Boot Start End Blocks Id System /dev/sda1 1 1953525167 976762583+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdc: 8011 MB, 8011120640 bytes 41 heads, 41 sectors/track, 9307 cylinders, total 15646720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdc1 8064 15646719 7819328 b W95 FAT32 Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc7d968ff Device Boot Start End Blocks Id System /dev/sdb1 64 3907029119 1953514528 7 HPFS/NTFS/exFAT major minor #blocks name 8 0 976762584 sda 8 1 266240 sda1 8 2 1509376 sda2 8 3 266240 sda3 8 4 131072 sda4 8 5 841012780 sda5 8 6 358400 sda6 8 7 35376128 sda7 8 8 1024 sda8 8 9 89501696 sda9 8 10 8337408 sda10 11 0 987136 sr0 8 32 7823360 sdc 8 33 7819328 sdc1 8 16 1953514584 sdb 8 17 1953514528 sdb1 I am no expert on this and I'm at a loss as how to correct this without having to re-format everything and reinstall Windows 8. However, if I'm to try using Ubuntu again then there is the risk this problem may come back. Again, I did not do anything manually - the installer did everything (with the exception of changing the boot to Legacy to allow the booting of another bootloader). LiveCD works but doesn't give me the options that I've seen here and as mentioned earlier, only boot recovery only gives me the options as mentioned earlier. Also this fails to load via USB (possibly because HDD comes before USB in the boot order?). Being used to a Windows environment, the Ubuntu (and Linux) environment is a dive at a less than comfortable depth at present (but one I fully intend to get to grips with - especially the commands being more common via Terminal). I very much appreciate the help with this guys.

  Read the article

• PHP: gethostbyname() suddenly no longer resolves names to IPs when run in Apache

  - by hurikhan77

  One of our older legacy servers which gets no further updates or reconfigurations suddenly stopped resolving hostnames to IPs when PHP is executed within Apache. However, it still works fine when executed from the CLI. From the RSS caches last modification time, I deduce that it stopped working on around Mar, 28th. To reproduce the problem, I created a script using fsockopen() and it said "connection failed (errno 2)". I further reduced the problem to being related with a failed name resolution: <?php $addr = gethostbyname("twitter.com"); echo "ADDR($addr)"; ?> When I run this through Apache, the output is ADDR(twitter.com), which is wrong. When I run this from the CLI, the output is ADDR(aaa.bbb.ccc.ddd) with varying IP addresses, as expected. Nothing on the server setup has changed. CLI and Apache module share the same php.ini. PHP is version v4.4.9 with Zend Optimizer v2.5.10. Apache is v1.3.31. I know the versions are old. But since nothing has been changed, a solution like "try to upgrade versions first" is no solution as the server's feature set/versioning is frozen and will be replaced soon. Still we need a solution. If I run dig through the script, it works in both environments (mod_php and CLI) but this is more than an ugly hack as it would involve many edits and testing throughout the whole script base which is also undesired as the PHP application on the server is frozen, too, and only receives security updates. It will be replaced by a complete rewrite (on the new server). But as the rewrite will take some time and successive replace parts of the legacy application, we need a fix for the resolver problem. I already googled a bit and while the problem is known, many did not find a fix. The fix to raise memory limits did not work. Restarts did not work. The resolver in mod_php just did stop working for no apparent reason. :-(

  Read the article

• Have a service start on startup with Ubuntu

  - by Joseph Silvashy

  I'm not clear on how to start a service when the server boots, I read on some of the other questions asked about adding the script to /etc/init.d, but It's just one line that I need to execute in the commandline: sudo /etc/init.d/avahi-daemon restart But I have a few issues with this, firstly, I apparently need to use sudo, and it gives me the following: ngl-server-01:~% sudo /etc/init.d/avahi-daemon start Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service avahi-daemon start Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the start(8) utility, e.g. start avahi-daemon But when I try just avahi-daemon start I get: Too many arguments Why is this? and how would you start this service?

  Read the article

• Jenkins swarm-plugin jar file, won't run in background

  - by JeanMertz

  We're working on an automation script for our Jenkins slaves on a local Unix server. To connect the slaves to the Jenkins master, we use the swarm plugin. Setting up the master was easy, and connecting clients is also easy with a single command. However, I am trying to get the slave command (a java application) to run in the background without stalling the current process, this doesn't seem to work. I've created an init.d file and added it to update-rc.d but that doesn't work. #!/bin/bash /usr/bin/java -jar /root/swarm-client-1.7-jar-with-dependencies.jar -executors 4 I've also tried to run it with an ampersand & to start the process in the background, but that doesn't work either because - from looking at the source - the jar file actually boots another process that is then started in the foreground. Any ideas on how to make this jar file start without stopping the bootstrap script?

  Read the article

• Can't boot after recent system update

  - by Ron

  Dear all, After recent system update (I think I saw something kernelish but don't really remember) my Ubuntu becomes unbootable. When I select "Ubuntu" from the boot menu, I'm greeted by a GRUB console and I don't know what to do (typing help shows some helpful commands for gods, unfortunately I'm a mere mortal). I'm doing this on Windows XP now. How do I go back to the future? Edit: The Ubuntu was installed using WUBI

  Read the article

• Anatomy of a .NET Assembly - PE Headers

  - by Simon Cooper

  Today, I'll be starting a look at what exactly is inside a .NET assembly - how the metadata and IL is stored, how Windows knows how to load it, and what all those bytes are actually doing. First of all, we need to understand the PE file format. PE files .NET assemblies are built on top of the PE (Portable Executable) file format that is used for all Windows executables and dlls, which itself is built on top of the MSDOS executable file format. The reason for this is that when .NET 1 was released, it wasn't a built-in part of the operating system like it is nowadays. Prior to Windows XP, .NET executables had to load like any other executable, had to execute native code to start the CLR to read & execute the rest of the file. However, starting with Windows XP, the operating system loader knows natively how to deal with .NET assemblies, rendering most of this legacy code & structure unnecessary. It still is part of the spec, and so is part of every .NET assembly. The result of this is that there are a lot of structure values in the assembly that simply aren't meaningful in a .NET assembly, as they refer to features that aren't needed. These are either set to zero or to certain pre-defined values, specified in the CLR spec. There are also several fields that specify the size of other datastructures in the file, which I will generally be glossing over in this initial post. Structure of a PE file Most of a PE file is split up into separate sections; each section stores different types of data. For instance, the .text section stores all the executable code; .rsrc stores unmanaged resources, .debug contains debugging information, and so on. Each section has a section header associated with it; this specifies whether the section is executable, read-only or read/write, whether it can be cached... When an exe or dll is loaded, each section can be mapped into a different location in memory as the OS loader sees fit. In order to reliably address a particular location within a file, most file offsets are specified using a Relative Virtual Address (RVA). This specifies the offset from the start of each section, rather than the offset within the executable file on disk, so the various sections can be moved around in memory without breaking anything. The mapping from RVA to file offset is done using the section headers, which specify the range of RVAs which are valid within that section. For example, if the .rsrc section header specifies that the base RVA is 0x4000, and the section starts at file offset 0xa00, then an RVA of 0x401d (offset 0x1d within the .rsrc section) corresponds to a file offset of 0xa1d. Because each section has its own base RVA, each valid RVA has a one-to-one mapping with a particular file offset. PE headers As I said above, most of the header information isn't relevant to .NET assemblies. To help show what's going on, I've created a diagram identifying all the various parts of the first 512 bytes of a .NET executable assembly. I've highlighted the relevant bytes that I will refer to in this post: Bear in mind that all numbers are stored in the assembly in little-endian format; the hex number 0x0123 will appear as 23 01 in the diagram. The first 64 bytes of every file is the DOS header. This starts with the magic number 'MZ' (0x4D, 0x5A in hex), identifying this file as an executable file of some sort (an .exe or .dll). Most of the rest of this header is zeroed out. The important part of this header is at offset 0x3C - this contains the file offset of the PE signature (0x80). Between the DOS header & PE signature is the DOS stub - this is a stub program that simply prints out 'This program cannot be run in DOS mode.\r\n' to the console. I will be having a closer look at this stub later on. The PE signature starts at offset 0x80, with the magic number 'PE\0\0' (0x50, 0x45, 0x00, 0x00), identifying this file as a PE executable, followed by the PE file header (also known as the COFF header). The relevant field in this header is in the last two bytes, and it specifies whether the file is an executable or a dll; bit 0x2000 is set for a dll. Next up is the PE standard fields, which start with a magic number of 0x010b for x86 and AnyCPU assemblies, and 0x20b for x64 assemblies. Most of the rest of the fields are to do with the CLR loader stub, which I will be covering in a later post. After the PE standard fields comes the NT-specific fields; again, most of these are not relevant for .NET assemblies. The one that is is the highlighted Subsystem field, and specifies if this is a GUI or console app - 0x20 for a GUI app, 0x30 for a console app. Data directories & section headers After the PE and COFF headers come the data directories; each directory specifies the RVA (first 4 bytes) and size (next 4 bytes) of various important parts of the executable. The only relevant ones are the 2nd (Import table), 13th (Import Address table), and 15th (CLI header). The Import and Import Address table are only used by the startup stub, so we will look at those later on. The 15th points to the CLI header, where the CLR-specific metadata begins. After the data directories comes the section headers; one for each section in the file. Each header starts with the section's ASCII name, null-padded to 8 bytes. Again, most of each header is irrelevant, but I've highlighted the base RVA and file offset in each header. In the diagram, you can see the following sections: .text: base RVA 0x2000, file offset 0x200 .rsrc: base RVA 0x4000, file offset 0xa00 .reloc: base RVA 0x6000, file offset 0x1000 The .text section contains all the CLR metadata and code, and so is by far the largest in .NET assemblies. The .rsrc section contains the data you see in the Details page in the right-click file properties page, but is otherwise unused. The .reloc section contains address relocations, which we will look at when we study the CLR startup stub. What about the CLR? As you can see, most of the first 512 bytes of an assembly are largely irrelevant to the CLR, and only a few bytes specify needed things like the bitness (AnyCPU/x86 or x64), whether this is an exe or dll, and the type of app this is. There are some bytes that I haven't covered that affect the layout of the file (eg. the file alignment, which determines where in a file each section can start). These values are pretty much constant in most .NET assemblies, and don't affect the CLR data directly. Conclusion To summarize, the important data in the first 512 bytes of a file is: DOS header. This contains a pointer to the PE signature. DOS stub, which we'll be looking at in a later post. PE signature PE file header (aka COFF header). This specifies whether the file is an exe or a dll. PE standard fields. This specifies whether the file is AnyCPU/32bit or 64bit. PE NT-specific fields. This specifies what type of app this is, if it is an app. Data directories. The 15th entry (at offset 0x168) contains the RVA and size of the CLI header inside the .text section. Section headers. These are used to map between RVA and file offset. The important one is .text, which is where all the CLR data is stored. In my next post, we'll start looking at the metadata used by the CLR directly, which is all inside the .text section.

  Read the article

• How to make HOME or END keys work in mc running on OS X (ssh)

  - by Sorin Sbarnea

  I installed MacPorts on OS X 10.5 and I found out that when I connect to the computer using SSH and use mc - Midnight Commander - the HOME and END keys do not work. I have to mention that I'm using putty and I am able to use the keyboard very well on Linux machines like Fedora, Ubuntu,... Here is putty keyboard configuration (a configuration I found to be optimal over time): Backspace key: 127 Home/End keys: Standard Function keys: Xterm R6 Cursor keys: Normal Numpad: normal Terminal type string: xterm-color I'm looking for a command line solution/script that does these changes, this make much easier to create a prepare OS script for configuring a new OS.

  Read the article

• JRockit Virtual Edition Debug Key

  - by changjae.lee

  There are a few keys that can help the debugging of the JRVE env in console. you can type in each keys in JRVE console to see what's happening under the hood. key '0' : System information key '5' : Enable shutdown key '7' : Start JRockit Management Server (port 7091) key '8' : Statistics Counters key '9' : Full Thread Dump key '0' : Status of Debug-key Below is the sample out from each keys. Debug-key '1' pressed ============ JRockitVE System Information ============ JRockitVE version : 11.1.1.3.0-67-131044 Kernel version : 6.1.0.0-97-131024 JVM version : R27.6.6-28_o-125824-1.6.0_17-20091214-2104-linux-ia32 Hypervisor version : Xen 3.4.0 Boot state : 0x007effff Uptime : 0 days 02:04:31 CPU : uniprocessor @2327 Mhz CPU usage : 0% ctx/s: 285 preempt/s: 0 migrations/s: 0 Physical pages : 82379/261121 (321/1020 MB) Network info : 10.179.97.64 (10.179.97.64/255.255.254.0) GateWay : 10.179.96.1 MAC address : 00:16:3e:7e:dc:78 Boot options : vfsCwd : /application/user_projects/domains/wlsve_domain mainArgs : java -javaagent:/jrockitve/services/sshd/sshd.jar -cp /jrockitve/jrockit/lib/tools.jar:/jrockitve/lib/common.jar:/application/patch_wls1032/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/application/wlserver_10.3/server/lib/weblogic.jar -Dweblogic.Name=WlsveAdmin -Dweblogic.Domain=wlsve_domain -Dweblogic.management.username=weblogic -Dweblogic.management.password=welcome1 -Dweblogic.management.GenerateDefaultConfig=true weblogic.Server consLog : /jrockitve/log/jrockitve.log mounts : ext2 / dev0; posixLocale : en_US posixTimezone : Asia/Seoul posixEncoding : ISO-8859-1 Local disk : Size: 1024M, Used: 728M, Free: 295M ======================================================== Debug-key '5' pressed Shutdown enabled. Debug-key '7' pressed [JRockit] Management server already started. Ignoring request. Debug-key '8' pressed Starting stat recording Debug-key '8' pressed ========= Statistics Counters for the last second ========= dev.eth0_rx.cnt : 22 packets dev.eth0_rx_bytes.cnt : 2704 bytes dev.net_interrupts.cnt : 22 interrupts evt.timer_ticks.cnt : 123 ticks hyper.priv_entries.cnt : 144 entries schedule.context_switches.cnt : 271 switches schedule.idle_cpu_time.cnt : 997318849 nanoseconds schedule.idle_cpu_time_0.cnt : 997318849 nanoseconds schedule.total_cpu_time.cnt : 1000031757 nanoseconds time.system_time.cnt : 1000 ns time.timer_updates.cnt : 123 updates time.wallclock_time.cnt : 1000 ns ======================================= Debug-key '9' pressed ===== FULL THREAD DUMP =============== Fri Jun 4 08:22:12 2010 BEA JRockit(R) R27.6.6-28_o-125824-1.6.0_17-20091214-2104-linux-ia32 "Main Thread" id=1 idx=0x4 tid=1 prio=5 alive, in native, waiting -- Waiting for notification on: weblogic/t3/srvr/T3Srvr@0x646ede8[fat lock] at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method) at java/lang/Object.wait(J)V(Native Method) at java/lang/Object.wait(Object.java:485) at weblogic/t3/srvr/T3Srvr.waitForDeath(T3Srvr.java:919) ^-- Lock released while waiting: weblogic/t3/srvr/T3Srvr@0x646ede8[fat lock] at weblogic/t3/srvr/T3Srvr.run(T3Srvr.java:479) at weblogic/Server.main(Server.java:67) at jrockit/vm/RNI.c2java(IIIII)V(Native Method) -- end of trace "(Signal Handler)" id=2 idx=0x8 tid=2 prio=5 alive, in native, daemon Open lock chains ================ Chain 1: "ExecuteThread: '0' for queue: 'weblogic.socket.Muxer'" id=23 idx=0x50 tid=20 waiting for java/lang/String@0x630c588 held by: "ExecuteThread: '1' for queue: 'weblogic.socket.Muxer'" id=24 idx=0x54 tid=21 (active) ===== END OF THREAD DUMP =============== Debug-key '0' pressed Debug-keys enabled Happy Cloud Walking :)

  Read the article

• SQL SERVER – Poll – What would you love to see in SQL in Sixty Seconds?

  - by Pinal Dave

  Last week, I had my very first SQL in Sixty Seconds Video of this year. Lots of people send me email asking for me to continue this series as it was extremely fun at times to watch the video. I am going to start the series again in the month of June. However, I need your help to decide what would like to see in SQL in Sixty Seconds Videos. Here are quick poll and I requesting you to help me with the poll. Take Our Poll (function(d,c,j){if(!d.getElementById(j)){var pd=d.createElement(c),s;pd.id=j;pd.src='http://s1.wp.com/wp-content/mu-plugins/shortcodes/js/polldaddy-shortcode.js';s=d.getElementsByTagName(c)[0];s.parentNode.insertBefore(pd,s);} else if(typeof jQuery !=='undefined')jQuery(d.body).trigger('pd-script-load');}(document,'script','pd-polldaddy-loader')); Contest  If you leave a comment to this blog post and if I build a SQL in Sixty Seconds Video on it. I will send you a surprise gift (worth USD 25). Earlier Videos Here are few of my previous SQL in Sixty Seconds Video. Please check them out they should give you an idea what I usually cover in Sixty Seconds. Reference: Pinal Dave (https://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL in Sixty Seconds, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Video

  Read the article

• Segmentation fault in Ubuntu One Music

  - by maxroby

  When clicking on the "My Downloads" button in Ubuntu One Music the application crashes with a segmentation fault, showing the following terminal messages: ** Message: console message: @0: The page at https://one.ubuntu.com/music/store/library displayed insecure content from http://media.one.ubuntu.com/media/img/favicon.ico. Errore di segmentazione (core dump creato) So i can't access my Ubuntu One Music downloads from inside Rhythmbox.

  Read the article

• Performance Alert Writing to event Log but not running program

  - by TooFat

  I followed the instructions here How to create and configure performance alerts in Windows Server 2003 to set up an alert if the available logical disk space on one of my drives goes below a certain number. I selected the option to write to the application event log and select the "run this program" option and put in the path to a script that sends me an email. If I copy the path to the script and run it everything works and I get the email. When I start the alert I can see that the limit I set is being exceeded and the logs are being written to the application log, but the email is never being sent. I have the runas user and pword set to a Domain Admin. If I make the "run this program path" to C:\Windows\System32\calc.exe" it also doesn't start up the calculator. The Performance Logs and alerts services is running as Local Admin with allow to interact with desktop. What am I doing wrong?

  Read the article

• syslogd: Logfile format (not configuration format)

  - by chris_l

  Hi, I'd like to parse logfiles. Is the logfile format of syslogd the same for all systems? On my system (Debian Lenny), it's: Mar 7 04:22:40 my-host-name ... (I'm not much interested in the ... part) Can I rely on this? And is there maybe some more-or-less official description? The manpage of syslogd describes the config format, but not the logfile format. Ideally, the description would give the fields official names like (date, time, host, entry) or (datetime, hostname, message). Maybe additionally some regular expressions. I'd like to use the names and regexes in my script, to avoid an unnecessary deviation from the standard, and to make sure, that the script runs everywhere. Thanks Chris

  Read the article

• Scripting a database copy from MS Sql 2005 to 2008 without detach/backup/RDP

  - by James Santiago

  My goal is to move a single SQL 2005 database to a seperate 2008 server. The issue is my level of access to both servers. On each I can only access the database and nothing else. I cant create a backup file or detach the database because I don't have access to the file system or to create a proxy. I've tried using the generate script function of sql 2005 management studio express to restore the schema but receive command not supported errors when attempting to execute the sql on the new database. Similarly I tried using EMS SQL Manager 2005 Lite to script a backup of the schema and data but ran into similar problems. How do I go about acomplishing this? I can't seem to find any solutions outside of using the detach and backup functions.

  Read the article

• Why are all logins disabled in the virtual terminal after enabling root account from desktop?

  - by Mitch

  Just for testing purposes, I went a head and enabled the root account, by using the commands below: sudo passwd root [sudo] password for abed: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully Once that happened, I went ahead and did Ctrl+Alt+F1, to get to the first virtual console, and at the login prompt I try logging in as abed, su, root, all comeback with login incorrect. Why is that happening, and how can I fix it.

  Read the article

• How to set up secure cookie on weblogic server

  - by adejuanc

  WebLogic Server allows a user to securely access HTTPS resources in a session that was initiated using HTTP, without loss of session data. To enable this feature, add AuthCookieEnabled="true" to the WebServer element in config.xml: <WebServer Name="myserver" AuthCookieEnabled="true"/>Setting AuthCookieEnabled to true, which is the default setting, causes the WebLogic Server instance to send a new secure cookie, _WL_AUTHCOOKIE_JSESSIONID, to the browser when authenticating via an HTTPS connection. Once the secure cookie is set, the session is allowed to access other security-constrained HTTPS resources only if the cookie is sent from the browser.Thus, WebLogic Server uses two cookies: the JSESSIONID cookie and the _WL_AUTHCOOKIE_JSESSIONID cookie. By default, the JSESSIONID cookie is never secure, but the _WL_AUTHCOOKIE_JSESSIONID cookie is always secure. A secure cookie is only sent when an encrypted communication channel is in use. Assuming a standard HTTPS login (HTTPS is an encrypted HTTP connection), your browser gets both cookies.For subsequent HTTP access, you are considered authenticated if you have a valid JSESSIONID cookie, but for HTTPS access, you must have both cookies to be considered authenticated. If you only have the JSESSIONID cookie, you must re-authenticate.To configure on Admin Console : Log into WebLogic Admin Console. Under Domain Structure, press click on <domainname> Select the "Web Applications" tab Select "Lock and Edit" in change center. Click on  "Auth Cookie Enabled" checkbox. Restart to confirm changes. Test an application and view the cookie which got stored as "JSESSIONID" To Configure the Web application's weblogic-application.xml file: Run the following to extract the file from the web application's weblogic-application.xml: $PATH_JDK_HOME\binjar -xvf easy-web-examples.ear META-INF/weblogic-application.xml Add <cookie-secure>true</cookie-secure> between <session-descriptor> </session-descriptor> to the weblogic-application.xml. Run the following to repackage the file to the application: $PATH_JDK_HOME\bin\jar -uvf easy-web-examples.ear META-INF/weblogic-application.xml Deploy the application into WebLogic For further information, please read the documentation on "Using Secure Cookies to Prevent Session Stealing " : http://download.oracle.com/docs/cd/E12840_01/wls/docs103/security/thin_client.html#wp1053780

  Read the article

• I have 2 different GEdits?

  - by aserwin

  When I load GEdit, it is different from sudo GEdit. Normal GEdit gives me Gtk warnings in the console, and ithas a different look. When I install plugins on either version, it doesn't reflect on the other. I tried removing gedit and reinstalling, but I get the exact setups (in other words, GEdit didn't actually go away when I removed it) Any advice on how I can actually remove gedit and start over? (I have tried sudo apt-get remove --purge gedit - no joy)

  Read the article

• Windows Azure Database (SQL Azure) Development Tip

  - by BuckWoody

  When you create something in the cloud, it's real, and you're charged for it. There are free offerings, and you even get free resources with your Microsoft Developer Network (MSDN) subscription, but there are limits within those. Creating a 1 GB database - even with nothing in it - is a 1 GB Database. If you create it, drop it, and create it again 2 minutes later, that's 2 GB of space you've used for the month. Wait - how do I develop in this kind of situation? With Windows Azure, you can simply install the free Software Development Kit (SDK) and develop your entire application for free - you need never even log in to Windows Azure to code. Once you're done, you simply deploy the app and you start making money from the application as you're paying for it. Windows Azure Databases (The Artist Formerly Known As SQL Azure) is a bit different. It's not emulated in the SDK - because it doesn't have to be. It's just SQL Server, with some differences in feature set. To develop in this environment, you can use SQL Server, any edition. Be aware of the feature differences, of course, but just develop away - even in the free "Express" or LocalDB flavors - and then right-click in SQL Server Management Studio to script objects. Script the database, but change the "Advanced" selection to the Engine Type of "SQL Azure". Bing. Although most all T-SQL ports directly, one thing to keep in mind is that you need a Clustered Index on every table. Often the Primary Key (PK) is a good choice for that.

  Read the article

• How to setup a simple self-hosted dynamic DNS server

  - by Cerin

  I have a small internal network of physical machines running hypervisors, which in turn run several KVM Ubuntu virtual machines. How would I setup an internal dynamic DNS server so that when I run a script to create a new virtual machine, that VM could automatically register itself in the DNS server? Bind seems to be the standard DNS server for Linux, but it seems designed for a much more "static" DNS model. Dynamically updating this would require a complicated script that would have to SSH into the DNS server, edit configuration files, and then restart the server. This doesn't seem like a very elegant solution. Are there better options? I saw a similar question, although they're asking for a solution for a public setting on Amazon. My servers are entirely private, and I don't want to rely on an external VM host or Dynamic DNS provider.

  Read the article

• How to execute with /bin/false shell

  - by Amar

  I am trying to setup per-user fastcgi scripts that will run each on a different port and with a different user. Here is example of my script: #!/bin/bash BIND=127.0.0.1:9001 USER=user PHP_FCGI_CHILDREN=2 PHP_FCGI_MAX_REQUESTS=10000 etc... However, if I add user with /bin/false (which I want, since this is about to be something like shared hosting and I don't want users to have shell access), the script is run under 1001, 1002 'user' which, as my Google searches showed, might be a security hole. My question is: Is it possible to allow user(s) to execute shell scripts but disable them so they cannot log in via SSH?

  Read the article

• What does the -P option do to mount?

  - by Simon

  I'm migrating from an archaic version of Red Hat to Ubuntu 9. When going through my old nfs mount script, I found that it contained the -P option. So my script looks like: sudo mount -t nfs -o -P ... It looks like the -P is one of the -o options. My question is: what does the -P option do? I've searched every man page I can find, with no luck. Could it have to do with privileged ports?

  Read the article

• links for 2011-03-04

  - by Bob Rhubart

  Joao Oliveira: Forms and Reports 11g Fusion Startup Script "After Fusion Middleware 11g Linux installation (Weblogic, Forms, Reports, Discoverer and Portal or others) probably most of the newcomers will wonder how to create a startup script to start the Weblogic managed Servers when the server starts up or reboots." (tags: oracle fusionmiddleware weblogic) Anthony Shorten: SOA Suite Integration: Part 3: Loading files Anthony says: "One of the most common scenarios in SOA Integration is the loading of a file into the product from an external source. In Oracle SOA Suite there is a File Adapter that can process many file types into your BPEL process." (tags: oracle otn soa soasuite) Francisco Munoz Alvarez: Playing with Oracle 11gR2, OEL 5.6 and VirtualBox 4.0.2 (1st Part) Oracle ACE Francisco Munoz Alvarez kicks off a tutorial on creating an Oracle Database 11gR2 instance using Oracle VirtualBox and OEL. (tags: oracle database virtualbox virtualization) ORACLENERD: VirtualBox and Shared Folders Oracle ACE Chet Justice shares some tips. (tags: oracle otn oracleace virtualization virtualbox) Chris Muir: Check out the ADF content at this year's ODTUG KScope11 conference Oracle ACE Director Chris Muir shares information on this year's ODTUD Kaleidoscope event in Long Beach, CA, June 26-30. (tags: oracle otn oracleace odtug adf) Edwin Biemond: Setting a virtual IP on a specific Network interface with WebLogic 10.3.4 PS3 Edwin says: "If you want High Availability in WebLogic you need to enable the WebLogic server migration, configure the nodemanager, use a virtual / floating IP in your managed servers and channels." (tags: oracle otn oracleace highavailability weblogic virtualization) Markus Eisele: High Performance JPA with GlassFish and Coherence - Part 3 Markus says: "In this third part of my four part series I'll explain strategy number two of using Coherence with EclipseLink and GlassFish. This is all about using Coherence as Second Level Cache (L2) with EclipseLink." (tags: oracle otn oracleace glassfish coherence) Michel Schildmeijer: Set Oracle ESB montoring with Enterprise Manager Grid Control "Monitoring your Oracle SOA Suite environment...can be very complicated, but if you are using Grid Control, Oracle provides you the SOA Management Pack. Unfortunately this SOA Management Pack has pretty detailed OOTB info about BPEL, but for ESB you won’t find any OOTB metrics." (tags: oracle otn soa grid servicebus)

  Read the article

• Checking if your SIMPLE databases need a log backup

  - by Fatherjack

  Hopefully you have read the blog by William Durkin explaining why your SIMPLE databases need a log backup in some cases. There is a SQL Server bug that means in some cases databases are marked as being in SIMPLE RECOVERY but have a log wait type that shows they are not properly configured. Please read his blog for the full explanation and a great description of how to reproduce the issue. As part of our (William happens to be my Boss) work to recover our affected databases I wrote this small PowerShell script to quickly check our servers for databases that needed the attention that William details.  cls $Servers = “Server01″,”Server02″,”etc”,”etc” foreach($Server in $Servers){ write-host “************” $server “****************”     $server = New-Object Microsoft.sqlserver.management.smo.server $Server     foreach($db in $Server.databases){         $db | where {$_.RecoveryModel -eq “Simple” -and $_.logreusewaitstatus -ne “nothing”} | select name, LogReuseWaitStatus     } } If you get any results from this query then you should consult Williams blog for the details on what action you should take. This script does give out false positives if in some circumstances depending on how busy your databases are. Hopefully this will let you check your servers quickly and if you find any problems you can reference Williams blog to understand what you need to do.

  Read the article

• rsync problems and security concerns

  - by MB.

  Hi I am attempting to use rsync to copy files between two linux servers. both on 10.04.4 I have set up the ssh and a script running under a cron job. this is the message i get back from the cron job. To: mark@ubuntu Subject: Cron ~/rsync.sh Content-Type: text/plain; charset=ANSI_X3.4-1968 X-Cron-Env: X-Cron-Env: X-Cron-Env: X-Cron-Env: Message-Id: <20120708183802.E0D54FC2C0@ubuntu Date: Sun, 8 Jul 2012 14:38:01 -0400 (EDT) rsync: link_stat "/home/mark/#342#200#223rsh=ssh" failed: No such file or directory (2) rsync: opendir "/Library/WebServer/Documents/.cache" failed: Permission denied (13) rsync: recv_generator: mkdir "/Library/Library" failed: Permission denied (13) * Skipping any contents from this failed directory * rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1060) [sender=3.0.7] Q.1 can anyone tell me why I get this message -- rsync: link_stat "/home/mark/#342#200#223rsh=ssh" failed: No such file or directory (2) the script is: #!/bin/bash SOURCEPATH='/Library' DESTPATH='/Library' DESTHOST='192.168.1.15' DESTUSER='mark' LOGFILE='rsync.log' echo $'\n\n' >> $LOGFILE rsync -av –rsh=ssh $SOURCEPATH $DESTUSER@$DESTHOST:$DESTPATH 2>&1 >> $LOGFILE echo “Completed at: `/bin/date`” >> $LOGFILE Q2. I know I have several problems with the permissions all of the files I am copying usually require me to use sudo to manipulate them. My question is then is there a way i can run this job without giving my user root access or using root in the login ?? Thanks for the help .

  Read the article

• OpenJs mysql not reading database [migrated]

  - by Benedikt Wutzi

  I try to access a mysql table using OpenJs Grid. I already doublechecked if the database "partsdb" and the table "parts" exists and it can be accessed from the commandline. Currently I'm using the must basic example: members.php: <!DOCTYPE html> <html lang="en"> <head> <meta charset="utf-8"> <title>Members Page</title> <script> $(function() { $(".parts").grid(); }); </script> </head> <body> <div id="container"> <h1>Members Page</h1> <table action="ajax.php"> <tr> <th col="id">Id</th> <th col="name">Name</th> </tr> </table> <a href='<?php echo base_url()."main/logout" ?>'>Logout</a> </div> and ajax.php <?php mysql_connect("localhost","****","*****"); mysql_select_db("partsdb"); require_once("grid.php"); $grid = new Grid("parts"); ?> When I run php directly on ajax.php I get an error telling me: " Unknown column 'parts.' in 'field list' " and the table shows only the headers. What am I doing wrong?

  Read the article

• Need help generating a core dump from apache segfault

  - by blockhead

  I have a script which intermittently returns a white screen of death in firefox and Error 324 (net::ERR_EMPTY_RESPONSE): Unknown error. chrome. When I try to access the script using a PHP HTTP client (like Zend_Http_Client), intermittently I get an exception (sorry I don't have the exact message on me at the moment). I suspect a segfault. This is further buttressed by the lines in my error log that look like this: [Thu Mar 18 16:03:02 2010] [notice] child pid 845 exit signal Segmentation fault (11) Now, I'm running RedHat, and I know that RedHat doesn't generate core dumps out-of-the-box. I followed the instructions here http://kbase.redhat.com/faq/docs/DOC-5353, but I'm not seeing any core dumps. How do I generate a core dump?

  Read the article

< Previous Page | 416 417 418 419 420 421 422 423 424 425 426 427  | Next Page >