Search Results

Search found 14376 results on 576 pages for 'interaction design'.

Page 423/576 | < Previous Page | 419 420 421 422 423 424 425 426 427 428 429 430  | Next Page >

  • Network Server Cabinets - How does the ventilation work?

    - by Nicholas
    Recently I've been looking at a range of network server cabinets with a mesh door at the rear. At the top of the cabinet are ceiling mounted fans with dust filters attached. These fans suck air out of the cabinet - presumably to remove the hot air that has risen to the top. My question is why do these fans have dust filters? What point do they serve? If the air flow is pulled in by these fans through the mesh door, then surely they are not there to protect the hardware inside from dust? Also, there are other minor grilled gaps around the enclosure, how does this kind of ventilation design work?

    Read the article

  • Nginx rewrite rules, some work, some don't

    - by Lawrence Goldstien
    Here are the two rewrite rules: This one works rewrite ^/knowledgebase/([0-9]+)/[a-z0-9_-]+.html$ /./knowledgebase.php?action=displayarticle&id=$1 last; This one doesn't rewrite ^/announcements/([0-9]+)/[a-z0-9_-]+.html$ /./announcements.php?id=$1 last; There is no difference between the two as far as I can see. The url to be rewritten for announcements is: /announcements/2/New-Site-Design.html And should be rewritten to: /announcements.php?id=2 I really can't see how the announcements one doesn't work compared to the knowledgebase one. Any tips would be greatly appreciated.

    Read the article

  • Resilient Linux Mail Server Setup

    - by Coops
    How would people design a resilient mail server setup with Linux? On an application level what the system needs to provide is both an incoming and outgoing mail service (i.e. SMTP & IMAP), along with filtering and archive storage (the archive part isn't critical yet, so we'll look at this later probably). What is required on top of this is a resilient system, i.e. one which will handle individual server failures without interrupting service. As such I would term this a High Availability mail system. This is in contrast to a High Performance mail setup, as in our case the volume of mail being handled isn't the important factor, it's simply that it stays online. Having not approached this problem before, the first thing I thought of was a clustered file system (gfs/gluster/etc), combined with heartbeat to failover a floating IP to another box in the case of a server failure. Combined with postfix & dovecot does this sound feasible to people?

    Read the article

  • University Assignment: Datacenter/Networking Infrastructure for Hosting Company [closed]

    - by TCB13
    My university assigned me to theorizing a data center for an Web Hosting company. The company should provide the following services: Shared WebHosting; Dedicated Servers; VPS (Virtual Private Server); The bandwith (as resquested) is limited to 10 Gbps. Is there any good book / other info I can read (max 100 pages) about how to design a good data center for hosting, what are the best practices and what should be done from a (logical) network perspective, what security policies should be implemented and how the data center should be built (physically)? Thank you ;)

    Read the article

  • Looking for new hosting company

    - by Charles Chadwick
    I am currently looking for a new hosting company for my business. We are a design and development company and have been recommending WestHost to our clients for the last several years. However due to some changes they have implemented in the last year, we have decided to start referring people elsewhere. Most of our clients need affordable Linux hosting with the basics. SSH is also a definite must and 24/7 support (preferably phone, as well as email/ticket system) that won't cost extra. An easy to use and understand control panel would be nice as well. I have heard good things about HostGator, and am wondering if anyone has experience with them. The prices seem right and they have everything we need. We are also thinking of purchasing a dedicated server with them for a specific project that's going to require one. I don't know if I am asking this in the right place, if this is not welcome here please let me know.

    Read the article

  • How Can I Set the OS X Dock to Show Instantly Instead of Waiting Half a Second in Snow Leopard?

    - by Patrik Björklund
    Having a MacBook Pro 13" I find myself trying to maximize the screen real estate constantly which have led me to put the dock at the right hand corner of the screen. Now in an attempt to save a few more pixels I decided to give autohiding of the dock a go and ran into a problem that have plagued me all night... When you toggle the switch to automatically hide the dock you get stuck with a small delay before it appears when hovering the edge of the screen. I have learnt that this is one of the many design principles Apple have put in use. In this case it appears to be their mission to save me from seeing the dock those few times when it's not intentional to touch the screens edge. In Windows there was a way to tweak this setting to have the menubar appear instantly by altering some registry value. Is there some way I can do this in Mac OS X?

    Read the article

  • How to update a keyboard layout DLL on Windows?

    - by user87690
    Information about keyboard layout is stored in keyboard layout DLLs on Windows. One can make a custom layout using a tool like Microsoft Keyboard Layout Creator (http://msdn.microsoft.com/en-us/goglobal/bb964665.aspx). It creates the dynamical library and also an installer which places the DLL at a right place and also puts necessary information to registry so the layout can be used. Now my question. How can one update his custom layout? One could uninstall the layout and install the new version which effectively replaces the DLL file. However this alone doesn't work because it seems that the old copy of the DLL stays loaded somewhere and is used when one sets the layout instead of loading new version. So is there a way how to tell the system that its “keyboard layout cache” is invalid? Of course I could reboot the whole system but I'd like to avoid it as it's annoying and seems to be poor design to reboot whole system just to reload a DLL.

    Read the article

  • How can I get started with BigData?

    - by ????? ????????
    I have a programming background, and I've done lots of database design and written lots of queries with Sql Server. I am really excited about looking at bigdata solutions. I know almost nothing about it. The way I want to learn is to sign up for a sandbox where I can try things out. questions Is there a sandbox where I can play around with hadoop? It does not have to be free. Would amazon EMR be the right path to go? What technologies should I be looking at to get started quickly? Is there a 'bigdata' dataset that is available to play with? Thank you so much for your guidance.

    Read the article

  • Big noise from Power Supply Unity Fa? Should I replace it immediately?

    - by EApubs
    Recently, I started to get a large noise from my PC when switched on. After some time, it disappears. I discovered that the issue is with the Power Supply Unit. Does this mean I have a failing PSU? Will it harm the PC if I didn't replace it immediately? Several years ago I bought a new computer casing which is very weird. Its small and compact. Normally, we have the PSU in the top. But in here, the PSU is on the bottom and right below the hard drive. Recently, two of my hard drives started to show problems. Read errors and bad sectors. Can it be the PSU and the design of the casing? Here's an image of the PSU and the hard drive :

    Read the article

  • Connecting to localhost with smartphone: possible?

    - by Arturas Molcanovas
    I am currently developing a mobile PHP project on localhost (or, to be more precise, a locally hosted website reachable at http://azgoth/) on my desktop computer and wish to check out how the design looks on my phone's various browsers, however, since the project's actually in my computer rather than the public net, I am unable to do so. Both my Desktop computer and smartphone connect to the internet via the same router, so I wondered, would it be possible to somehow make http://azgoth/ accessible to my smartphone in a similar way that my desktop computer accesses it, without making it public for everyone to see? OS: Windows XP SP 3 Service: Apache HTTPD Router: D-Link DIR-300 FTP Directory

    Read the article

  • How can I audit a Linux filesystem for files which have been changed or added within a specific time

    - by Bcos
    We are a website design/hosting company running several sites on a Linux server using Joomla 1.5.14 and recently someone was able exploit a vulnerability in the RW Cards component to write arbitrary files/modify existing files on our filesystem enabling them to do some nasty things to our customers sites. We have removed vulnerable modules from all sites but are still seeing some problems. We suspect that they still have some scripts installed and need a way to audit anything that has been changed or added in the last 10 days. Is there a command or script we can run to do this?

    Read the article

  • NVIDIA Driver Crashing on Custom-Built Windows 7 PC

    - by srunni
    I've got a custom-built PC with these specs: Fractal Design Define R3 ASUS P8Z77-V motherboard Intel Core i7-2700k with Thermalright HR-02 Macho Cooler NVIDIA GeForce GTX 560 with Arctic Cooling Accelero Twin Turbo II Cooler Crucial M4 128 GB SSD 1 TB Hitachi HDD G.SKILL Ares Series 2x8 GB RAM (x2) SeaSonic 520W PSU Windows 7 Ultimate SP1 (x64) NVIDIA driver version 301.42 Upon building the PC, I overclocked the CPU (but never the GPU), and there were no problems for 1-2 months. Then I started getting crashes with this error when doing anything that's computationally or graphically intensive: I un-overclocked the CPU, but that hasn't fixed anything. This is what the inside of my case looks like: I'd appreciate any guidance on resolving this problem. I did get some of the thermal paste on the graphics card when installing the aftermarket cooler, but there were no issues for a month or two. Update I did a clean install and the issue persisted - looks like it's a hardware issue. I will try removing/cleaning/reseating all the parts.

    Read the article

  • Managing hosts and iptables in scalable architecture

    - by hakunin
    Let's say I have a load balancer in front of 3 app servers. Let's say I also have these services available at certain IPs: Postgres server Redis server ElasticSearch server Memcached server 1 Memcached server 2 Memcached server 3 So that's 6 nodes at 6 different IP addresses. Naturally, every one of my 3 app servers needs to talk to these 6 servers above. Then, to make it a bit funkier, I also have 3 worker servers. And each worker also talks to the above 6 servers, but thankfully workers and apps never need to talk to each other. Now's the kicker. Everything is on Digital Ocean VPS. What that means is: you have no private network, no private IPs. You only have separate, random IP address on each machine. You can't mask them or anything. So in order to build a secure environment I would have to configure some iptables. For example: Open app servers be accessed by load balancer server Open redis, ES, PG, and each memcached servers to be accessed by each app's IP and each worker's IP This means that every time I add an app or worker I have to also reconfigure iptables in those above 6 servers to welcome the new app or worker. Is there a way to simplify this type of setup? I was thinking — what if there was a gateway machine between apps/workers and the above 6 machines. This way all the interaction would always happen via the gateway server, and when I add a new app or worker I wouldn't need to teach the 6 servers to let it in. If I went this route, then I'd hope a small 512mb server could handle that perhaps, and there wouldn't be almost any overhead. Or would there? Please help with best way to handle this situation. I would appreciate an answer as concrete as possible. I don't think this is too specific, because this general architecture is very common, and Digital Ocean is becoming increasingly popular. A concrete solution here would be much appreciated by many.

    Read the article

  • Linux bonded Interfaces hanging periodically

    - by David
    I've several hosts that are showing problems with connectivity. When working from the command line, for example, typing is frozen for a second or so, then recovers - then it does it again. The most egregious example host would freeze (input) for 15-30 seconds, then recover and go out 5 seconds later. Switching cables didn't do anything - but removing one of the physical cables caused everything to clear up instantly (which why I think this is a network problem). Looking at the network I couldn't see any packets floating that would explain this. These ethernet interfaces (Gigabit Dell) were working normally previously, but since we moved the systems - and put them on a new set of switches - this has been a problem on multiple theoretically identically-configured hosts. The original switches were an HP Procurve 1810-24G and an HP Procurve 1800-24G connected with LLDP; the new switches are both Cisco SG 200-26, which I understand are rebranded Linksys switches. Is this caused by a problem with the switches? Is it the switch configurations? Are the Cisco switches incapable of handling this? I don't see where the configuration is located; I searched the usual /etc/sysconfig/network/devices but there's nothing in there about options (like mii polling) and nothing about the method of balancing the two. Searching scripts, I can't find anything in /etc/init.d/network either. The hosts are almost all Red Hat Enterprise Linux 5.x systems (5.6, 5.7) but some are Ubuntu Server 10.04.3 Lucid Lynx. I need help with both if it comes to that. UPDATE: We're also seeing some problems with servers on the original switches. The HP switches and the Cisco switches are also interconnected (temporarily); there is a cable run from one switch to the next. Pings on any of these hosts show about one ICMP packet out of every 5-6 getting dropped (timed out). Could there be an interaction between the two switches? Oh, and the hosts are using bonding with Balance-RR as the method.

    Read the article

  • Is there a limit on the number of USB external drives?

    - by Beska
    I've got three external HDDs, all My Books, 500 GB, 750 GB, and 1 TB. If I hook one or two of them up to a computer, everything seems fine. If I hook all three of them to a computer (I've tried this on two different computers, one running Windows XP, one running Windows Vista), the bootup time goes up by more than an order of magnitude. It can suddenly take about 10-20 minutes to boot the machine, whereas before it might take a minute. All three drives work fine on their own. I'm not using any kind of hub; all three are plugged directly into the machine. Is this associated with some kind of inherent limit in USB? Is this bad hardware design in the CPU box? Is this a My Book problem?

    Read the article

  • How to define a Crystal Report to Windows Default-Printer with a certain papertray

    - by Ice
    I got the job to design some reports with crystal reports XI for a user-group of nearby 20 peoples. Each user has his own printer on his desk. These printers are attached to the network and are served by a print server. The users have thin-clients and are served by citrix with desktops and so has each user his own windows default printer defined. All printers are from the same type and have some papertrays. the reports in question have to go on paper-tray number 3. I have one *.rpt File and so there is one possibility to define a printer and a paper-tray, but how do i define the windows 'default' printer?

    Read the article

  • Domain Controller Placement

    - by Matt
    I've been working through some Exchange training documentation (the official MS e-learning package) and all of the design scenarios allude to placing at least one DC from your forest root domain in every site. I'm not sure whether this just relates to Exchange, but I can think of a number of issues we experience in our forest that would be resolved by this. For example, a Microsoft support engineer has stated that EVERY client in a child domain (i.e. all workstations and member servers) need access to a forest root DC to check certificate/template permissions, even on a subordinate CA. I have attempted to locate documentation or guidelines from Microsoft on this, but have not been able to find anything. I found the Domain Controller Placement guide, but it's only a form - you would use it to document where you will place your DCs, but it doesn't give any guidance on where you should deploy them. Does anyone know where, or if, I can find any such documentation?

    Read the article

  • Preferred apache permissions for www files with several authors

    - by user1316464
    I can't for the life of me figure out how to design my permissions scheme for my apache files. My requirements seem pretty simple: Apache should have standard permissions of RX for Directories and R for files Web authors should have RWX for Directories and RW for files Don't want to give any access to "other" Want new files/folders to inherit the proper permissions Here are the schemes I've tried 570 for directories and 460 for files Owner: Apache Group: Webdev The problem here is that new files created by users int the Webdev group are owned by user:Webdev and Apache can't read them. If Apache were in the group Webdev then it would also have the wrong permissions (ie it would have Write permissions to files) 750 for directories and 640 for files Owner: Webdev Group: Apache (Webdev is a member of Apache) The problem here is that there is only one webdev account and I have multiple people who need access to contribute. In theory this would work with only one developer if Webdev were also a member of the Apache group. Any ideas?

    Read the article

  • Setting up Multiple Routers (as Hardware Firewalls) behind a Home Router

    - by Synetech
    I’ve currently got one computer behind a router with built-in firewall functionality, connected to a home cable-modem that has a single Ethernet port and one IP. I’m going to have to set up another computer for the rest of the family to use which of course will need to be connected to the Internet, probably wirelessly since the modem is in my room and the new system would not be. What I would like to do is to get two more small routers with firewall capability and connect each computer to a router, which would in turn connect to the main router which connects to the cable-modem. That way, both systems have a hardware firewall protecting them (particularly the wireless system) and the burden of blocking would be reduced on both the computer CPUs and the main router because the secondary routers would handle some of the workload. I’m trying to find out about the complexities inherent in this design and how I could set it up to work, specifically the IP handling and NAT aspect. Thanks a lot.

    Read the article

  • Font display issue (Mac OS X)?

    - by avenas8808
    I used a font manager on Mac OS X, for additional fonts in my graphic design projects without installing them to the fonts folder (I think that's how it works) - using Font Book and Font Explorer X Version 1.2.3 on OS X 10.6. Most fonts work fine, but Interstate has a problem: Interstate Regular is installed, but for some reason it's probably not seeing it; it's seeing all the Bold and Condensed versions fine. In the above image, it displays the second font as Interstate Regular, but it isn't that font... why? Also, how do I reset the system fonts folder back to the default-installed fonts (I think it's in the library folder) if worst comes to worst, and is using a font manager on Mac or Windows a good idea? I don't want to wreck my system, fairly new to using Mac, especially OS X, so any help would be gratefully accepted.

    Read the article

  • Mac OS 10.7 DMG files don't pop up anymore?

    - by Sosukodo
    Has anybody noticed that double-clicking on a DMG file no longer raises the mounted image to the front of all windows? It used to be that when you double-clicked a dmg file, it would pop-up but now you have to click Finder and click on the mounted image. Is this a bug, by design or a setting that I can change? Update: As per Daniel Beck's suggestion, I created a new account and downloaded the most recent version of Firefox via Safari. It still exhibited the same behavior. However, I noticed that if I double-click thew DMG from within the Downloads folder in Finder, it does pop up. But when I double-click the DMG within Safari (and Firefox also) it does not pop up over all other windows.

    Read the article

  • Acrobat Reader, and indeed all Adobe products are freezing and crashing on print

    - by 5tratus
    Everything was working fine, right up till I had to do some driver work to get my scanner to work - now I can't seem to print from any Adobe product. I click print and the program freezes, it stops responding, and in the case of Acrobat Reader, it crashes. In the case of In-design CS4, I have to stop the process in task manager, in the case of Fireworks CS3 - I think it just crashes. Printing a PDF hangs and crashes inside of Firefox and IE browsers too. My printer works and I can print from MS Word, Excel and directly by right clicking on a non-Adobe file and choosing print. But when I try it in an Adobe product. I'm running Windows 7 64-bit, my version of Adobe Reader is: 10.1.11, Windows is updated, and I don't have any unusual extensions.

    Read the article

  • Building a network at home, what cables to use (if any)?

    - by Faruz
    My house is currently in ruins and am building it. While doing so, I wanted to design a home network. My main objectives are surfing and HD streaming. The house is one-level, 100 sq/m (about 300 sq/ft), and one of the rooms is a safety room with Reinforced concrete walls. About a year ago, when I started planning, I thought about putting Cat 6 STP cables in the walls and create network points in the rooms. Should I use STP or FTP? I heard that STP is a problem regarding connectors and stuff. Is it really beneficial? Will it work OK if I transfer the wire together with the telephone line? Should I maybe go with WLan and count on 802.11n to enable me to stream HD across the house? is 802.11n that good?

    Read the article

  • Why isn't Adobe software multilingual?

    - by Takowaki
    I work in a design studio with several non-native English speakers (in this case, into Japanese and Chinese). I have installed the latest Creative Suite (CS5) on our mac stations and was once again disappointed that unlike so many modern software packages there is still no option to change the language of the software. Most of the team has been good enough to work on their English, but it would be much more helpful for them to work in their native language. Why does Adobe continue to require separate licenses based on language? Are they operating under the assumption that only a single language is ever spoken in any given country? Are there any other third party options or does Adobe at least have some sort of statement regarding this policy?

    Read the article

  • Can you set up a Linode VPS as a reseller type scenario?

    - by MAZUMA
    First, I'm a fairly green on this subject. So, go easy. I do web design and development and would like to set up a way to be the central host so to speak for my clients. Currently they are scattered across multiple hosting companies. I've looked at some the cheapy options like a LunarPages and some of the more robust options like RackSpace Cloud and Linode. RackSpace has a reseller program, but it's managed and more at the top end on cost. I'm not seeing any type of reseller program in place for Linode. Can I purchase a higher Linode plan and use Apache2's VirtualHost configuration to handle multiple domains (about 8 domains, but hopefully will grow.). Or, am I not thinking about this correctly?

    Read the article

< Previous Page | 419 420 421 422 423 424 425 426 427 428 429 430  | Next Page >