Search Results

Search found 32375 results on 1295 pages for 'dnn module development'.

Page 424/1295 | < Previous Page | 420 421 422 423 424 425 426 427 428 429 430 431  | Next Page >

  • Having a hard time having consecutive animations for an attack

    - by Kelby Styler
    So I've been trying to figure this out for about 8 hours now...It's driving me nuts because I am pretty sure that it is something dead simple that I am just not understanding. I had everything working fine when I was just cycling through the animation: Idle - Attack - Attack 1 - Attack 2. Just in an infinite loop. The problem now is that I want it to go Attack - check if x time passes if ctrl pressed before x passes move to Attack 1, if not move back to Idle - Then either Attack 1 or Idle depending on how long has passed. I've almost gotten it a few time, but something always happens where it falls apart if I press ctrl too fast or after multiple cycles of the animation. Any help would be appreciated, I'm just at my wits end on this one. I've been looking at this so long that I just don't know where to go anymore. Code is below, here is the controller using UnityEngine; using System.Collections; public class MeleeAttack : MonoBehaviour { public int damage; public bool Attack; public bool Attack1; public bool Attack2; public bool Idle; private Animator animator; private int attnum = 0; private float count = 2f; private float timeLeft; //Gives value to damage output void MAttackDmg () { if (Input.GetKeyDown (KeyCode.RightControl) || Input.GetKeyDown (KeyCode.LeftControl)) { switch (attnum) { case (0): Attack = true; damage = 2; animator.SetBool ("Attack", Attack); attnum++; Idle = false; animator.SetBool ("Idle", Idle); timeLeft = count; break; case (1): Attack1 = true; damage = 2; animator.SetBool ("Attack1", Attack1); attnum++; Idle = false; animator.SetBool ("Idle", Idle); timeLeft = count; break; case (2): Attack2 = true; damage = 2; animator.SetBool ("Attack2", Attack2); attnum = 0; Idle = false; animator.SetBool ("Idle", Idle); timeLeft = count; break; } } if (Input.GetKeyUp (KeyCode.RightControl) || Input.GetKeyUp (KeyCode.LeftControl)) { switch (attnum) { case (0): Debug.Log ("false"); damage = 0; if (timeLeft <= 0f) { Attack2 = false; animator.SetBool ("Attack2", Attack2); Debug.Log ("t1"); Idle = true; animator.SetBool ("Idle", Idle); attnum = 0; timeLeft = count; } break; case (1): Debug.Log ("false1"); damage = 0; if (timeLeft <= 0f) { Debug.Log ("t2"); Attack = false; animator.SetBool ("Attack", Attack); Idle = true; animator.SetBool ("Idle", Idle); attnum = 0; timeLeft = count; } break; case (2): Debug.Log ("false2"); damage = 0; if (timeLeft <= 0f) { Attack1 = false; animator.SetBool ("Attack1", Attack1); Debug.Log ("t3"); Idle = true; animator.SetBool ("Idle", Idle); attnum = 0; timeLeft = count; } break; } } } // Use this for initialization void Awake () { animator = GetComponent<Animator> (); } // Update is called once per frame void Update () { timeLeft -= Time.deltaTime;; MAttackDmg (); } void Start (){ timeLeft = count; } }

    Read the article

  • Is there a market for a Text-based empire-building game?

    - by Vishnu
    I am working on building a text-based in-browser empire building game. The screen will be split into a console and an EXTREMELY rough vector map of your empire (just squares in a bigger square). Commands such as building and expanding would be typed into the console and automatically reflected in the map. Would there be any market for such a game? Would anyone want to play? To clarify, it would be online and everyone's empire would be in the same 'world'.

    Read the article

  • SharpDx: using maximized RenderForm

    - by ceiling cat
    I'm trying to learn DirectX via SharpDX, very new to this. What I want to do is be able to draw 2D shapes for a game I'm trying to make. So I started with the demo "MiniRect" that came with SharpDX. Since I want my game to be full-screen, I changed the RenderForm to be maximized (using WindowState) and set the FromBorderStyle to None. I noticed that even if the form is set to maximized, it's size is always 800 by 600. In my renderloop, if I specify the location for the rectangle has 400 by 300, it is drawn in the middle of the screen. If I try to set the location via mouse-click (using the RenderForm's MouseClick event, there is always an offset present between where the mouse was clicked and where the drawing shows up. My system DPI is set to the standard (96) so there shouldn't be any scaling. But it looks like there is a scaling factor of about 2.4 If it's not the DPI settings, does anyone have any idea what this be related to? The problem doesnt happen if the RenderForm is not maximized. Is there another way to be drawing full-screen using SharpDX? Thanks

    Read the article

  • 3DS Max 2012 OBJ file import missing polygons

    - by Vit
    I started learning OpenGL. I got to a point I want to import some "real" objects. After "Googling" I decided I will go with OBJ file for start, since it is simple to understand, and there are plenty of tutorials on how to read them properly. I have from university access to 3DS Max 2012. So I tried to create very simple model (just deformated cube) and exporting it using OBJ file, just to vertices and triangles for the moment, without textures, so I can examine its structure by myself. But if I imported it right back to 3DS from OBJ file, now it renders somewhat strange, like its smoothen, and with lightsource, even I have none in scene. But the geometry, its wireframe is intact. So I thought maybe it is problem of exporting only vertices and triangles so I downloaded Enterprise-D model from internet, exported with everything on (normals, textures everything), and again imported it. Now, some polygons are missing. So, I want to ask, am I doing something terribly wrong, or is there some incompatibility issue between .max and .obj file ? Even it is only simple textured model without any lightsources, animation etc.? Thanks. Edit: I tried objects with MeshLab, the first, deformated cube was absolutelly OK. But still bothers me that 3DS Max doesen´t render it properly. In Enterprise-D model, there are polygons missing even in MeshLab. I uploaded rar archive with .max model of Enterprise, same .obj model exported from 3DS, and obj model of deformated cube. Download here (2.5 MB, filesonic).

    Read the article

  • Voxel Engine in Multiplayer?

    - by Oliver Schöning
    This is a question more out of Interest for now, because I am not even near to the point that I could create this project at the moment. I really like the progress on the Atomontage Engine. A Voxel engine that is WIP at the moment. I would like to create a Voxel SERVER eventually. First in JavaScript (That's what I am learning right now) later perhaps in C++ for speed. Remember, I am perfectly aware that this is very hard! This is a brainstorm for the next 10 years as for now. What I would like to achieve one day is a Multiplayer Game in the Browser where the voxels positions are updated by XYZ input from the server. The Browser Does only 3 things: sending player input to the server, updating Voxel positions send from the server and rendering the world. I imagine using something like the Three.js libary on the client side. So that would be my programming dream right there... Now to something simpler for the near future. Right now I am learning javascript. And I am making games with Construct2. (A really cool JavaScript "game maker") The plan is to create a 2D Voxel enviorment (Block Voxels) on the Socket.IO Server* and send the position of the Voxels and Players to the Client side which then positions the Voxel Blocks to the Server Output coordinates. I think that is a bit more manageable then the other bigger idea. And also there should be no worries about speed with this type of project in JavaScript (I hope). Extra Info: *I am using nodejs (Without really knowing what it does besides making Socket.IO work) So now some questions: Is the "dream project" doable in JavaScript? Or is C++ just the best option because it does not take as long to be interpreted at run time like JavaScript? What are the limitations? I can think of some: Need of a Powerful server depending on how much information the server has to process. Internet Speed; Sending the data of the Voxel positions to every player could add up being very high! The browser FPS might go down quickly if rendering to many objects. One way of fixing reducing the packages Could be to let the browser calculate some of the Voxel positions from Several Values. But that would slow down the Client side too. What about the more achievable project? I am almost 100% convinced that this is possible in JavaScript, and that there are several ways of doing this. This is just XY position Updating for now.. Hope this did make some sense. Please comment if you got something to say :D

    Read the article

  • Different methods of ammo resupply

    - by Chris Mantle
    I'm writing a small game at the moment. Presently, I have one or two design elements that aren't locked down yet, and I wanted to ask for input on one of these. For dramatic effect, the player's character in my game is immobilised, alone and has a supposedly limited amount of ammo for their weapons. However, I would like to periodically resupply the player with ammo (for the purpose of balancing the level of difficulty and to allow the player to continue if they're doing well). I'm trying to think of a method of resupply that's different to the more familiar strategies of making ammo magically appear or having the antagonists drop some when they die. I'd like to emphasise the notion of the player's isolation as much as possible, and finding a way of 'sneaking' ammo to the player without removing too much of that emphasis is basically what I'm trying to think of (it's definitely a valid argument that resupplying the player removes it anyway) I have considered a sort of simple in-game 'store', where kills get you points that you can spend on ammo for your favourite weapon. This might work well, and may also be good for supporting a simple micro-transaction business model within the game. However, you'd have to pause the game often to make purchases, which would interrupt the action, and it works against the notion of isolation. Any thoughts?

    Read the article

  • coloring box2d body in LibGDX

    - by ved
    I want to color polygon of box2d in LibGDX. Found below useful class for that. http://libgdx.badlogicgames.com/nightlies/docs/api/com/badlogic/gdx/graphics/glutils/ShapeRenderer.html But, it is not coloring the body instead making colored shapes. I want colored bodies having all the property like gravity, restitution etc. In brief, I want to make colored ball and surface.And i don't want to attach sprite on bodies. Want just fill color in bodies. Need some guidance????

    Read the article

  • How to render 2D particles as fluid?

    - by luke
    Suppose you have a nice way to move your 2D particles in order to simulate a fluid (like water). Any ideas on how to render it? This is for a 2D game, where the perspective is from the side, like this. The water will be contained in boxes that can be broken in order to let it fall down and interact with other objects. The simplest way that comes to my mind is to use a small image for each particle. I am interested in hearing more ways of rendering water.

    Read the article

  • When to detect collisions in game loop

    - by Ciaran
    My game loop uses a fixed time step to do "physics" updates, say every 20 ms. In here I move objects. I draw frames as frequently as possible. I work out a value between 0 and 1 to represent the proportion of the physics tick that is complete and interpolate between the previous and current physics state before drawing. It results in a smoother game assuming the frame rate is higher than the physics update rate. I am currently doing the collision detection in the physics update routine. I was wondering should it instead take place in the interpolated draw routine where the positions match what the user sees? Collisions can result in explosions by the way.

    Read the article

  • 3d transformation of game world keeping gameplay 2d - COCOS2D 2.0

    - by samfisher
    Using: COCOS2D + iOS. I want to rotate the game world, may be loading another .tmx file for another dimensions when user want to switch dimension. the effect what I am looking for is something like this:CLICK HERE What I have thought of till now: rotating CCCamera will be mandatory. Question: How will I have the other part of the level in place while the camera rotates/rotating? I can load a CCSprite and rotate it accordingly to the 3rd dimension. phew..!! Question: When the camera and world is rotated, will the player controls work properly.. I think not...? I think a better option would be to checkout with COCOS3D... there I could implement 3d world... right?? Question: Not sure how well 2d dynamics will work there as I want to user Box2d as physics engine.. could anyone provide suggestions? Regards, Sam

    Read the article

  • genetic algorithm for leveling/build test

    - by Renan Malke Stigliani
    I'm starting o build a online PVP (duel like, one-to-one) game, where there is leveling, skill points, special attacks and all the common stuff. Since I never did anything like that, I'm still thinking about the maths behind the level/skill/special balances. So I thought good way of testing the best/combo builds would implement a Genetic Algorith. It'd be like that: Generate a big portion of random characters Make them fight, level them up accordingly to the victories(more XP)/losses(less XP) Mate the winners, crossing their builds, to try to make even best characters Add some more random chars, emulating new players Repeat the process for some time, or util find some chars who can beat everyone butts So I could play with the math and try to find the balance where the top x% chars would be a mix of various build types. So, is it a good idea, or there are some other easier method to do the balance? PS: I like this also, because it sounds funny

    Read the article

  • Vehicle: Boat accelerating and turning in Unity

    - by Emilios S.
    I'm trying to make a player-controllable boat in Unity and I'm running into problems with my code. 1) I want to make the boat to accelerate and decelerate steadily instead of simply moving the speed I'm telling it to right away. 2) I want to make the player unable to steer the boat unless it is moving. 3) If possible, I want to simulate the vertical floating of a boat during its movement (it going up and down) My current code (C#) is this: using UnityEngine; using System.Collections; public class VehicleScript : MonoBehaviour { public float speed=10; public float rotationspeed=50; // Use this for initialization // Update is called once per frame void Update () { // Forward movement if(Input.GetKey(KeyCode.I)) speed = transform.Translate (Vector3.left*speed*Time.deltaTime); // Backward movement if(Input.GetKey(KeyCode.K)) transform.Translate (Vector3.right*speed*Time.deltaTime); // Left movement if(Input.GetKey(KeyCode.J)) transform.Rotate (Vector3.down*rotationspeed*Time.deltaTime); // Right movement if(Input.GetKey(KeyCode.L)) transform.Rotate (Vector3.up*rotationspeed*Time.deltaTime); } } In the current state of my code, when I press the specified keys, the boat simply moves 10 units/sec instantly, and also stops instantly. I'm not really sure how to make the things stated above, so any help would be appreciated. Just to clarify, I don't necessarily need the full code to implement those features, I just want to know what functions to use in order to achieve the desired effects. Thank you very much.

    Read the article

  • Ogre3D Fog with overlays

    - by Yourdoom
    I'm building a game with Ogre3d, I've got fog working properly with: scenemanager->setFog(Ogre::FOG_LINEAR, Ogre::ColourValue( 0.23f, 0.725f, 1.0f ), 0, 18, 20 ); However I'm currently implementing a GUI system (libRocket) which is rendered on top of everything else, and this removes the fog, does anyone know how to fix this? (I'm using the default libRocket rendering system for ogre as included in the samples, but this problem also appears when using a semi-transparent overlay).

    Read the article

  • help animating a player in Corona SDK

    - by andrew McCutchan
    Working on a game in the Corona SDK with Lua and I need help so the player animates on the line drawn. Right now he animates at the beggining and the end but not on the line. Here is the player code: function spawnPlayerObject(xPlayerSpawn,yPlayerSpawn,richTurn) --spawns Rich where we need him. -- riches sprite sheet and all his inital spirites. We need to adjust this so that animations 3-6 are the only ones that animate when moving horizontally local richPlayer = sprite.newSpriteSet(richSheet1,1,6) sprite.add(richPlayer, "rich", 1,6,500,1) rich = sprite.newSprite(richPlayer) rich.x = xPlayerSpawn rich.y = yPlayerSpawn rich:scale(_W*0.0009, _W*0.0009) -- scale is used to adjust the size of the object. richDir = richTurn rich.rotation = richDir rich:prepare("rich") rich:play() physics.addBody( rich, "static", { friction=1, radius = 15 } ) -- needs a better physics body for collision detection. end And here is the code for the line: function movePlayerOnLine(event) --for the original image replace all rich with player. if posCount ~= linePart then richDir = math.atan2(ractgangle_hit[posCount].y-rich.y,ractgangle_hit[posCount].x-rich.x)*180/math.pi playerSpeed = 5 rich.x = rich.x + math.cos(richDir*math.pi/180)*playerSpeed rich.y = rich.y + math.sin(richDir*math.pi/180)*playerSpeed if rich.x < ractgangle_hit[posCount].x+playerSpeed*10 and rich.x > ractgangle_hit[posCount].x-playerSpeed*10 then if rich.y < ractgangle_hit[posCount].y+playerSpeed*10 and rich.y > ractgangle_hit[posCount].y-playerSpeed*10 then posCount = posCount + 1 end end I don't think anything has changed recently but I have been getting an error when testing of "attempt to upvalue "rich" a nil value" on the second line, richDir = etc.

    Read the article

  • Do I need to store a generic rotation point/radius for rotating around a point other than the origin for object transforms?

    - by Casey
    I'm having trouble implementing a non-origin point rotation. I have a class Transform that stores each component separately in three 3D vectors for position, scale, and rotation. This is fine for local rotations based on the center of the object. The issue is how do I determine/concatenate non-origin rotations in addition to origin rotations. Normally this would be achieved as a Transform-Rotate-Transform for the center rotation followed by a Transform-Rotate-Transform for the non-origin point. The problem is because I am storing the individual components, the final Transform matrix is not calculated until needed by using the individual components to fill an appropriate Matrix. (See GetLocalTransform()) Do I need to store an additional rotation (and radius) for world rotations as well or is there a method of implementation that works while only using the single rotation value? Transform.h #ifndef A2DE_CTRANSFORM_H #define A2DE_CTRANSFORM_H #include "../a2de_vals.h" #include "CMatrix4x4.h" #include "CVector3D.h" #include <vector> A2DE_BEGIN class Transform { public: Transform(); Transform(Transform* parent); Transform(const Transform& other); Transform& operator=(const Transform& rhs); virtual ~Transform(); void SetParent(Transform* parent); void AddChild(Transform* child); void RemoveChild(Transform* child); Transform* FirstChild(); Transform* LastChild(); Transform* NextChild(); Transform* PreviousChild(); Transform* GetChild(std::size_t index); std::size_t GetChildCount() const; std::size_t GetChildCount(); void SetPosition(const a2de::Vector3D& position); const a2de::Vector3D& GetPosition() const; a2de::Vector3D& GetPosition(); void SetRotation(const a2de::Vector3D& rotation); const a2de::Vector3D& GetRotation() const; a2de::Vector3D& GetRotation(); void SetScale(const a2de::Vector3D& scale); const a2de::Vector3D& GetScale() const; a2de::Vector3D& GetScale(); a2de::Matrix4x4 GetLocalTransform() const; a2de::Matrix4x4 GetLocalTransform(); protected: private: a2de::Vector3D _position; a2de::Vector3D _scale; a2de::Vector3D _rotation; std::size_t _curChildIndex; Transform* _parent; std::vector<Transform*> _children; }; A2DE_END #endif Transform.cpp #include "CTransform.h" #include "CVector2D.h" #include "CVector4D.h" A2DE_BEGIN Transform::Transform() : _position(), _scale(1.0, 1.0), _rotation(), _curChildIndex(0), _parent(nullptr), _children() { /* DO NOTHING */ } Transform::Transform(Transform* parent) : _position(), _scale(1.0, 1.0), _rotation(), _curChildIndex(0), _parent(parent), _children() { /* DO NOTHING */ } Transform::Transform(const Transform& other) : _position(other._position), _scale(other._scale), _rotation(other._rotation), _curChildIndex(0), _parent(other._parent), _children(other._children) { /* DO NOTHING */ } Transform& Transform::operator=(const Transform& rhs) { if(this == &rhs) return *this; this->_position = rhs._position; this->_scale = rhs._scale; this->_rotation = rhs._rotation; this->_curChildIndex = 0; this->_parent = rhs._parent; this->_children = rhs._children; return *this; } Transform::~Transform() { _children.clear(); _parent = nullptr; } void Transform::SetParent(Transform* parent) { _parent = parent; } void Transform::AddChild(Transform* child) { if(child == nullptr) return; _children.push_back(child); } void Transform::RemoveChild(Transform* child) { if(_children.empty()) return; _children.erase(std::remove(_children.begin(), _children.end(), child), _children.end()); } Transform* Transform::FirstChild() { if(_children.empty()) return nullptr; return *(_children.begin()); } Transform* Transform::LastChild() { if(_children.empty()) return nullptr; return *(_children.end()); } Transform* Transform::NextChild() { if(_children.empty()) return nullptr; std::size_t s(_children.size()); if(_curChildIndex >= s) { _curChildIndex = s; return nullptr; } return _children[_curChildIndex++]; } Transform* Transform::PreviousChild() { if(_children.empty()) return nullptr; if(_curChildIndex == 0) { return nullptr; } return _children[_curChildIndex--]; } Transform* Transform::GetChild(std::size_t index) { if(_children.empty()) return nullptr; if(index > _children.size()) return nullptr; return _children[index]; } std::size_t Transform::GetChildCount() const { if(_children.empty()) return 0; return _children.size(); } std::size_t Transform::GetChildCount() { return static_cast<const Transform&>(*this).GetChildCount(); } void Transform::SetPosition(const a2de::Vector3D& position) { _position = position; } const a2de::Vector3D& Transform::GetPosition() const { return _position; } a2de::Vector3D& Transform::GetPosition() { return const_cast<a2de::Vector3D&>(static_cast<const Transform&>(*this).GetPosition()); } void Transform::SetRotation(const a2de::Vector3D& rotation) { _rotation = rotation; } const a2de::Vector3D& Transform::GetRotation() const { return _rotation; } a2de::Vector3D& Transform::GetRotation() { return const_cast<a2de::Vector3D&>(static_cast<const Transform&>(*this).GetRotation()); } void Transform::SetScale(const a2de::Vector3D& scale) { _scale = scale; } const a2de::Vector3D& Transform::GetScale() const { return _scale; } a2de::Vector3D& Transform::GetScale() { return const_cast<a2de::Vector3D&>(static_cast<const Transform&>(*this).GetScale()); } a2de::Matrix4x4 Transform::GetLocalTransform() const { Matrix4x4 p((_parent ? _parent->GetLocalTransform() : a2de::Matrix4x4::GetIdentity())); Matrix4x4 t(a2de::Matrix4x4::GetTranslationMatrix(_position)); Matrix4x4 r(a2de::Matrix4x4::GetRotationMatrix(_rotation)); Matrix4x4 s(a2de::Matrix4x4::GetScaleMatrix(_scale)); return (p * t * r * s); } a2de::Matrix4x4 Transform::GetLocalTransform() { return static_cast<const Transform&>(*this).GetLocalTransform(); } A2DE_END

    Read the article

  • Does XNA 4 support 3D affine transformations for 2D images?

    - by Paul Baker Salt Shaker
    Looooong story short I'm essentially trying to code Mode 7 in XNA. Before I continue bashing my brains out in research and various failed matrix math equations; I just want to make sure that XNA supports this just out-of-the-box (so to speak). I'd prefer not to have to import other libraries, because I want to learn how it works myself that way I understand the whole thing better. However that's all for naught if it won't work at all. So no opengl, directx, etc if possible (will eventually do it just to optimize everything, but not for now). tl;dr: Can I has Mode 7 in XNA?

    Read the article

  • Making an interface for input in C - How?

    - by tloszk
    I have a big question. I started to develop a simple 3D engine (or should I call it framework?). I use OpenGL for rendering and it is developed for Windows. It is all written in C. But I don't know, how to write an "interface" for the keyboard/mouse input. I would like to keep it as simple as possible and nice - what the Win32 "native" input system is not. If anyone has suggestions about the topic, please, tell me. Thanks for everyone, who answers to my question!

    Read the article

  • ASSIMP in my program is much slower to import than ASSIMP view program

    - by Marco
    The problem is really simple: if I try to load with the function aiImportFileExWithProperties a big model in my software (around 200.000 vertices), it takes more than one minute. If I try to load the very same model with ASSIMP view, it takes 2 seconds. For this comparison, both my software and Assimp view are using the dll version of the library at 64 bit, compiled by myself (Assimp64.dll). This is the relevant piece of code in my software // default pp steps unsigned int ppsteps = aiProcess_CalcTangentSpace | // calculate tangents and bitangents if possible aiProcess_JoinIdenticalVertices | // join identical vertices/ optimize indexing aiProcess_ValidateDataStructure | // perform a full validation of the loader's output aiProcess_ImproveCacheLocality | // improve the cache locality of the output vertices aiProcess_RemoveRedundantMaterials | // remove redundant materials aiProcess_FindDegenerates | // remove degenerated polygons from the import aiProcess_FindInvalidData | // detect invalid model data, such as invalid normal vectors aiProcess_GenUVCoords | // convert spherical, cylindrical, box and planar mapping to proper UVs aiProcess_TransformUVCoords | // preprocess UV transformations (scaling, translation ...) aiProcess_FindInstances | // search for instanced meshes and remove them by references to one master aiProcess_LimitBoneWeights | // limit bone weights to 4 per vertex aiProcess_OptimizeMeshes | // join small meshes, if possible; aiProcess_SplitByBoneCount | // split meshes with too many bones. Necessary for our (limited) hardware skinning shader 0; cout << "Loading " << pFile << "... "; aiPropertyStore* props = aiCreatePropertyStore(); aiSetImportPropertyInteger(props,AI_CONFIG_IMPORT_TER_MAKE_UVS,1); aiSetImportPropertyFloat(props,AI_CONFIG_PP_GSN_MAX_SMOOTHING_ANGLE,80.f); aiSetImportPropertyInteger(props,AI_CONFIG_PP_SBP_REMOVE, aiPrimitiveType_LINE | aiPrimitiveType_POINT); aiSetImportPropertyInteger(props,AI_CONFIG_GLOB_MEASURE_TIME,1); //aiSetImportPropertyInteger(props,AI_CONFIG_PP_PTV_KEEP_HIERARCHY,1); // Call ASSIMPs C-API to load the file scene = (aiScene*)aiImportFileExWithProperties(pFile.c_str(), ppsteps | /* default pp steps */ aiProcess_GenSmoothNormals | // generate smooth normal vectors if not existing aiProcess_SplitLargeMeshes | // split large, unrenderable meshes into submeshes aiProcess_Triangulate | // triangulate polygons with more than 3 edges //aiProcess_ConvertToLeftHanded | // convert everything to D3D left handed space aiProcess_SortByPType | // make 'clean' meshes which consist of a single typ of primitives 0, NULL, props); aiReleasePropertyStore(props); if(!scene){ cout << aiGetErrorString() << endl; return 0; } this is the relevant piece of code in assimp view code // default pp steps unsigned int ppsteps = aiProcess_CalcTangentSpace | // calculate tangents and bitangents if possible aiProcess_JoinIdenticalVertices | // join identical vertices/ optimize indexing aiProcess_ValidateDataStructure | // perform a full validation of the loader's output aiProcess_ImproveCacheLocality | // improve the cache locality of the output vertices aiProcess_RemoveRedundantMaterials | // remove redundant materials aiProcess_FindDegenerates | // remove degenerated polygons from the import aiProcess_FindInvalidData | // detect invalid model data, such as invalid normal vectors aiProcess_GenUVCoords | // convert spherical, cylindrical, box and planar mapping to proper UVs aiProcess_TransformUVCoords | // preprocess UV transformations (scaling, translation ...) aiProcess_FindInstances | // search for instanced meshes and remove them by references to one master aiProcess_LimitBoneWeights | // limit bone weights to 4 per vertex aiProcess_OptimizeMeshes | // join small meshes, if possible; aiProcess_SplitByBoneCount | // split meshes with too many bones. Necessary for our (limited) hardware skinning shader 0; aiPropertyStore* props = aiCreatePropertyStore(); aiSetImportPropertyInteger(props,AI_CONFIG_IMPORT_TER_MAKE_UVS,1); aiSetImportPropertyFloat(props,AI_CONFIG_PP_GSN_MAX_SMOOTHING_ANGLE,g_smoothAngle); aiSetImportPropertyInteger(props,AI_CONFIG_PP_SBP_REMOVE,nopointslines ? aiPrimitiveType_LINE | aiPrimitiveType_POINT : 0 ); aiSetImportPropertyInteger(props,AI_CONFIG_GLOB_MEASURE_TIME,1); //aiSetImportPropertyInteger(props,AI_CONFIG_PP_PTV_KEEP_HIERARCHY,1); // Call ASSIMPs C-API to load the file g_pcAsset->pcScene = (aiScene*)aiImportFileExWithProperties(g_szFileName, ppsteps | /* configurable pp steps */ aiProcess_GenSmoothNormals | // generate smooth normal vectors if not existing aiProcess_SplitLargeMeshes | // split large, unrenderable meshes into submeshes aiProcess_Triangulate | // triangulate polygons with more than 3 edges aiProcess_ConvertToLeftHanded | // convert everything to D3D left handed space aiProcess_SortByPType | // make 'clean' meshes which consist of a single typ of primitives 0, NULL, props); aiReleasePropertyStore(props); As you can see the code is nearly identical because I copied from assimp view. What could be the reason for such a difference in performance? The two software are using the same dll Assimp64.dll (compiled in my computer with vc++ 2010 express) and the same function aiImportFileExWithProperties to load the model, so I assume that the actual code employed is the same. How is it possible that the function aiImportFileExWithProperties is 100 times slower when called by my sotware than when called by assimp view? What am I missing? I am not good with dll, dynamic and static libraries so I might be missing something obvious. ------------------------------ UPDATE I found out the reason why the code is going slower. Basically I was running my software with "Start debugging" in VC++ 2010 Express. If I run the code outside VC++ 2010 I get same performance of assimp view. However now I have a new question. Why does the dll perform slower in VC++ debugging? I compiled it in release mode without debugging information. Is there any way to have the dll go fast in debugmode i.e. not debugging the dll? Because I am interested in debugging only my own code, not the dll that I assume is already working fine. I do not want to wait 2 minutes every time I want to load my software to debug. Does this request make sense?

    Read the article

  • How do I animate a spritesheet in cocos2d Android

    - by user729053
    I'm trying to animate a sprite in a spritesheet, the goal is to make the character walk from left to right. I subclassed CCSprite: CharacterSprite. this is my code: CCSpriteFrameCache.sharedSpriteFrameCache().addSpriteFrames("WalkAnimation.plist"); CCSpriteSheet spriteSheet = CCSpriteSheet.spriteSheet("WalkAnimation.png"); w.addChild(spriteSheet); ArrayList<CCSpriteFrame> walkSprites = new ArrayList<CCSpriteFrame>(); for(int i = 1; i<=8;++i) { walkSprites.add(CCSpriteFrameCache.sharedSpriteFrameCache().spriteFrameByName("walk"+ i +".png")); } //float randomFactor = (float)Math.random()*10; CCAnimation walkAnimation = CCAnimation.animation("walk", 0.1f, walkSprites); Log.v("addEnemy", "Show"); this.character = CCSprite.sprite(walkSprites.get(0)); Log.v("addEnemy", "Don't Show"); this.walkAction = CCRepeatForever.action(CCAnimate.action(walkAnimation, false)); character.runAction(walkAction); for(int k =0; k<amount; k++) { float randomFactor = (float)Math.random()*10; character.setPosition(CGPoint.ccp(-randomFactor * character.getContentSize().width/2, winSize.height / 6.0f)); spriteSheet.addChild(character); } This code is in my 2nd scene. And whenever I press on Start Game, nothing happens. But the code is executed till: character = CharacterSprite.sprite("walk1.png"); Can someone provide me of a snippet of animation using a spritesheet?

    Read the article

  • frame lock networking

    - by kochol
    I'm developing an RTS game and I want to add multiplayer support to my game. I picked the easiest technique to implement for start frame locking technique. I used server client networking architecture (I think it's my first mistake I think using peer to peer is a better one for this) On game update every clients send their commands and maybe receive some command then render the frame and wait for all clients to send their update complete message then all of them can go for the next frame. I send commands and all logic is calculated on the clients based on commands but the clients can go out of sync easily. Every AI controlled units make different decisions on each clients What I have to do to sync my game? Do you suggest me a better network architecture or technique?

    Read the article

  • How do I break an image into 6 or 8 pieces of different shapes?

    - by Anil gupta
    I am working on puzzle game, where the player can select an image from iPhone photo gallery. The selected image will save in puzzle page and after 3 second wait the selected image will be broken into 6 or 8 parts of different shapes. Then player will arrange these broken parts of images to make the original image. I am not getting idea how to break the image and merged so that player arrange the broken part. I want to break image like this below frame. I am developing this game in cocos2d.

    Read the article

  • How do I detect and handle collisions using a tile property with Slick2D?

    - by oracleCreeper
    I am trying to set up collision detection in Slick2D based on a tilemap. I currently have two layers on the maps I'm using, a background layer, and a collision layer. The collision layer has a tile with a 'blocked' property, painted over the areas the player can't walk on. I have looked through the Slick documentation, but do not understand how to read a tile property and use it as a flag for collision detection. My method of 'moving' the player is somewhat different, and might affect how collisions are handled. Instead of updating the player's location on the window, the player always stays in the same spot, updating the x and y the map is rendered at. I am working on collisions with objects by restricting the player's movement when its hitbox intersects an object's hitbox. The code for the player hitting the right side of an object, for example, would look like this: if(Player.bounds.intersects(object.bounds)&&(Player.x<=(object.x+object.width+0.5))&&Player.isMovingLeft){ isInCollision=true; level.moveMapRight(); } else if(Player.bounds.intersects(object.bounds)&&(Player.x<=(object.x+object.width+0.5))&&Player.isMovingRight){ isInCollision=true; level.moveMapRight(); } else if(Player.bounds.intersects(object.bounds)&&(Player.x<=(object.x+object.width+0.5))&&Player.isMovingUp){ isInCollision=true; level.moveMapRight(); } else if(Player.bounds.intersects(object.bounds)&&(Player.x<=(object.x+object.width+0.5))&&Player.isMovingDown){ isInCollision=true; level.moveMapRight(); } and in the level's update code: if(!Player.isInCollision) Player.manageMovementInput(map, i); However, this method still has some errors. For example, when hitting the object from the right, the player will move up and to the left, clipping through the object and becoming stuck inside its hitbox. If there is a more effective way of handling this, any advice would be greatly appreciated.

    Read the article

  • Computing pixel's screen position in a vertex shader: right or wrong?

    - by cubrman
    I am building a deferred rendering engine and I have a question. The article I took the sample code from suggested computing screen position of the pixel as follows: VertexShaderFunction() { ... output.Position = mul(worldViewProj, input.Position); output.ScreenPosition = output.Position; } PixelShaderFunction() { input.ScreenPosition.xy /= input.ScreenPosition.w; float2 TexCoord = 0.5f * (float2(input.ScreenPosition.x,-input.ScreenPosition.y) + 1); ... } The question is what if I compute the position in the vertex shader (which should optimize the performance as VSF is launched significantly less number of times than PSF) would I get the per-vertex lighting insted. Here is how I want to do this: VertexShaderFunction() { ... output.Position = mul(worldViewProj, input.Position); output.ScreenPosition.xy = output.Position / output.Position.w; } PixelShaderFunction() { float2 TexCoord = 0.5f * (float2(input.ScreenPosition.x,-input.ScreenPosition.y) + 1); ... } What exactly happens with the data I pass from VS to PS? How exactly is it interpolated? Will it give me the right per-pixel result in this case? I tried launching the game both ways and saw no visual difference. Is my assumption right? Thanks. P.S. I am optimizing the point light shader, so I actually pass a sphere geometry into the VS.

    Read the article

  • How to make custom shaped holes in terrain

    - by Guy Ben-Moshe
    So I'm trying to create a game where you fit certain shaped objects into the hole that fits them (similar to the young children's game with different shaped blocks) in Unity 3D. I've encountered a problem, how do I make the holes in the terrain? Or what type of object should I use for making holes in? So far I've tried to make a 3d model in unity by using other cubes and planes, it just doesn't feel right. I guess I need to create a model in another software and import to unity, I don't know any other software I can use. Tips would help.

    Read the article

  • Converting to and from local and world 3D coordinate spaces?

    - by James Bedford
    Hey guys, I've been following a guide I found here (http://knol.google.com/k/matrices-for-3d-applications-view-transformation) on constructing a matrix that will allow me to 3D coordinates to an object's local coordinate space, and back again. I've tried to implement these two matrices using my object's look, side, up and location vectors and it seems to be working for the first three coordinates. I'm a little confused as to what I should expect for the w coordinate. Here are couple of examples from the print outs I've made of the matricies that are constructed. I'm passing a test vector of [9, 8, 14, 1] each time to see if I can convert both ways: Basic example: localize matrix: Matrix: 0.000000 -0.000000 1.000000 0.000000 0.000000 1.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 5.237297 -45.530716 11.021271 1.000000 globalize matrix: Matrix: 0.000000 0.000000 1.000000 0.000000 -0.000000 1.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 -11.021271 -45.530716 -5.237297 1.000000 test: Vector4f(9.000000, 8.000000, 14.000000, 1.000000) localTest: Vector4f(14.000000, 8.000000, 9.000000, -161.812256) worldTest: Vector4f(9.000000, 8.000000, 14.000000, -727.491455) More complicated example: localize matrix: Matrix: 0.052504 -0.000689 -0.998258 0.000000 0.052431 0.998260 0.002068 0.000000 0.997241 -0.052486 0.052486 0.000000 58.806095 2.979346 -39.396252 1.000000 globalize matrix: Matrix: 0.052504 0.052431 0.997241 0.000000 -0.000689 0.998260 -0.052486 0.000000 -0.998258 0.002068 0.052486 0.000000 -42.413120 5.975957 -56.419727 1.000000 test: Vector4f(9.000000, 8.000000, 14.000000, 1.000000) localTest: Vector4f(-13.508600, 8.486917, 9.290090, 2.542114) worldTest: Vector4f(9.000190, 7.993863, 13.990230, 102.057129) As you can see in the more complicated example, the coordinates after converting both ways loose some precision, but this isn't a problem. I'm just wondering how I should deal with the last (w) coordinate? Should I just set it to 1 after performing the matrix multiplication, or does it look like I've done something wrong? Thanks in advance for your help!

    Read the article

< Previous Page | 420 421 422 423 424 425 426 427 428 429 430 431  | Next Page >