Search Results

Search found 12445 results on 498 pages for 'memory fragmentation'.

Page 425/498 | < Previous Page | 421 422 423 424 425 426 427 428 429 430 431 432  | Next Page >

  • Understanding Flash SWC's imported into Flex Builder 3 and key framed animation

    - by Hank Scorpio
    I am trying to understand what is going on in a SWC that I am importing from Flash CS4 into Flex Builder 3. Specifically I am using a SWC supplied by a Designer as the animation for a custom preloader (a subclassed DownloadProgressBar). The issue I am trying to understand is, once the FlexEvent.INIT_COMPLETE is fired, I cleanup by removing the swc by running this : removeChild(myPreloader); myPreloader = null; though even after I have removed this (which is successful, as I have checked by comparing this.numChildren before and after the call) the key framed animation still continues to run (not visibly). This has been detected by the Designer placing a trace in the time line of the animation (in Flash). Can anyone tell me why is it, that even after I have removed the animation from the subclassed DownloadProgressBar, it still keeps running ? Also, is it standard practice when importing SWCs to manage the cleanup of resources from the Flash side of things (much like releasing memory in obj-c). I find it counter intuitive that removing the child from the Flex side does not stop the animation. Any clues to this would be greatly appreciated.

    Read the article

  • Write asynchronously to file in perl

    - by Stefhen
    Basically I would like to: Read a large amount of data from the network into an array into memory. Asynchronously write this array data, running it thru bzip2 before it hits the disk. repeat.. Is this possible? If this is possible, I know that I will have to somehow read the next pass of data into a different array as the AIO docs say that this array must not be altered before the async write is complete. I would like to background all of my writes to disk in order as the bzip2 pass is going to take much longer than the network read. Is this doable? Below is a simple example of what I think is needed, but this just reads a file into array @a for testing. use warnings; use strict; use EV; use IO::AIO; use Compress::Bzip2; use FileHandle; use Fcntl; my @a; print "loading to array...\n"; while(<>) { $a[$. - 1] = $_; } print "array loaded...\n"; my $aio_w = EV::io IO::AIO::poll_fileno, EV::WRITE, \&IO::AIO::poll_cb; aio_open "./out", O_WRONLY || O_NONBLOCK, 0, sub { my $fh = shift or die "error while opening: $!\n"; aio_write $fh, undef, undef, $a, -1, sub { $_[0] > 0 or die "error: $!\n"; EV::unloop; }; }; EV::loop EV::LOOP_NONBLOCK;

    Read the article

  • Can I use a plaintext diff algorithm for tracking XML changes?

    - by rinogo
    Hi all! Interesting question for you here. I'm working in Flex/AS3 on (for simplicity) an XML editor. I need to provide undo/redo functionality. Of course, one solution is to store the entire source text with each edit. However, to conserve memory, I'd like to store the diffs instead (these diffs will also be used to transmit updates to the server for auto-saving). My question is - can I use a plaintext diff algorithm for tracking these XML changes? My research on the internet indicates that I cannot do so. However, I'm obviously missing something. Plaintext diff provides functionality that is purportedly: diff(text, text') - diffs patch(text, diffs) - text' XML is simply text, so why can't I just use diff() and patch() to transform the text reliably? For example: Let's say that I'm a poet. When I write poetry, I use lots of funky punctuation... You know, like <, /, and . (You might see where I'm going with this...) If I'm writing my poetry in an application that uses diffs to provide undo/redo functionality, does my poetry become garbled when I undo/redo my edits? It's just text! Why does it make a difference to the algorithm? I obviously don't get something here...Thanks for explaining! :) -Rich

    Read the article

  • iText PDFReader Extremely Slow To Open

    - by Wbmstrmjb
    I have some code that combines a few pages of acro forms (with acrofields in tact) and then at the end writes some JS to the entire document. It is the PdfReader in the function adding the JS that is taking extremely long to instantiate (about 12 seconds for a 1MB file). Here is the code (pretty simple): public static byte[] AddJavascript(byte[] document, string js) { PdfReader reader = new PdfReader(new RandomAccessFileOrArray(document), null); MemoryStream msOutput = new MemoryStream(); PdfStamper stamper = new PdfStamper(reader, msOutput); PdfWriter writer = stamper.Writer; writer.AddJavaScript(js); stamper.Close(); reader.Close(); byte[] withJS = msOutput.GetBuffer(); return withJS; } I have benchmarked the above and the line that is slow is the first one. I have tried reading it from a file instead of memory and tried using a MemoryStream instead of the RandomAccessFileOrArray. Nothing makes it any faster. If I add JS to a single page document, it is very fast. So my thought is that the code that combines the pages is somehow making the PDF slow to read for the PdfReader. Here is the combine code: public static byte[] CombineFiles(List<byte[]> sourceFiles) { MemoryStream output = new MemoryStream(); PdfCopyFields copier = new PdfCopyFields(output); try { output.Position = 0; foreach (var fileBytes in sourceFiles) { PdfReader fileReader = new PdfReader(fileBytes); copier.AddDocument(fileReader); } } catch (Exception exception) { //throw } finally { copier.Close(); } byte[] concat = output.GetBuffer(); return concat; } I am using PdfCopyFields because I need to preserve the form fields and so cannot use the PdfCopy or PdfSmartCopy. This combine code is very fast (few ms) and produces working documents. The AddJS code above is called after it and the PdfReader open is the slow piece. Any ideas?

    Read the article

  • Grails - Simple hasMany Problem - How does 'save' work?

    - by gav
    My problem is this: I want to create a grails domain instance, defining the 'Many' instances of another domain that it has. I have the actual source in a Google Code Project but the following should illustrate the problem. class Person { String name static hasMany[skills:Skill] static constraints = { id (visible:false) skills (nullable:false, blank:false) } } class Skill { String name String description static constraints = { id (visible:false) name (nullable:false, blank:false) description (nullable:false, blank:false) } } If you use this model and def scaffold for the two Controllers then you end up with a form like this that doesn't work; My own attempt to get this to work enumerates the Skills as checkboxes and looks like this; But when I save the Volunteer the skills are null! This is the code for my save method; def save = { log.info "Saving: " + params.toString() def skills = params.skills log.info "Skills: " + skills def volunteerInstance = new Volunteer(params) log.info volunteerInstance if (volunteerInstance.save(flush: true)) { flash.message = "${message(code: 'default.created.message', args: [message(code: 'volunteer.label', default: 'Volunteer'), volunteerInstance.id])}" redirect(action: "show", id: volunteerInstance.id) log.info volunteerInstance } else { render(view: "create", model: [volunteerInstance: volunteerInstance]) } } This is my log output (I have custom toString() methods); 2010-05-10 21:06:41,494 [http-8080-3] INFO bumbumtrain.VolunteerController - Saving: ["skills":["1", "2"], "name":"Ian", "_skills":["", ""], "create":"Create", "action":"save", "controller":"volunteer"] 2010-05-10 21:06:41,495 [http-8080-3] INFO bumbumtrain.VolunteerController - Skills: [1, 2] 2010-05-10 21:06:41,508 [http-8080-3] INFO bumbumtrain.VolunteerController - Volunteer[ id: null | Name: Ian | Skills [Skill[ id: 1 | Name: Carpenter ] , Skill[ id: 2 | Name: Sound Engineer ] ]] Note that in the final log line the right Skills have been picked up and are part of the object instance. When the volunteer is saved the 'Skills' are ignored and not commited to the database despite the in memory version created clearly does have the items. Is it not possible to pass the Skills at construction time? There must be a way round this? I need a single form to allow a person to register but I want to normalise the data so that I can add more skills at a later time. If you think this should 'just work' then a link to a working example would be great. Hope this makes sense, thanks in advance! Gav

    Read the article

  • initWithCoder and initWithNibName

    - by vodkhang
    I am trying to encode some data state in a UITableViewController. In the first time, I init the object with Nibname without any problem. However, when I initWithCoder, the UITableViewController still loads but when I clicked on a cell, the application crash and the debugger tells me about EXEC_BAD_ACCESS, something wrong with my memory, but I do not know Here is my code: - (id) init { if(self = [self initWithNibName:@"DateTableViewController" bundle:nil]) { self.dataArray = [[NSMutableArray alloc] initWithObjects:@"1", @"2", @"3", nil]; } return self; } // Customize the appearance of table view cells. - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *CellIdentifier = @"Cell"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier] autorelease]; } // Set up the cell... int index = indexPath.row; cell.textLabel.text = [self.dataArray objectAtIndex:index];; return cell; } - (NSString *)tableView:(UITableView *)tableView titleForHeaderInSection:(NSInteger)section { return @"Test Archiver"; } - (void)encodeWithCoder:(NSCoder *)coder { [super encodeWithCoder:coder]; [coder encodeObject:self.dataArray]; } - (id)initWithCoder:(NSCoder *)coder { return [self init]; } - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { int index = indexPath.row; [self.dataArray addObject:[NSString stringWithFormat:@"Hello %d", index]]; [self.tableView reloadData]; }

    Read the article

  • deleting HBITMAP causes an access violation at runtime.

    - by Oliver
    Hi, I have the following code to take a screenshot of a window, and get the colour of a specific pixel in it: void ProcessScreenshot(HWND hwnd){ HDC WinDC; HDC CopyDC; HBITMAP hBitmap; RECT rt; GetClientRect (hwnd, &rt); WinDC = GetDC (hwnd); CopyDC = CreateCompatibleDC (WinDC); //Create a bitmap compatible with the DC hBitmap = CreateCompatibleBitmap (WinDC, rt.right - rt.left, //width rt.bottom - rt.top);//height SelectObject (CopyDC, hBitmap); BitBlt (CopyDC, //destination 0,0, rt.right - rt.left, //width rt.bottom - rt.top, //height WinDC, //source 0, 0, SRCCOPY); COLORREF col = ::GetPixel(CopyDC,145,293); // Do some stuff with the pixel colour.... delete hBitmap; ReleaseDC(hwnd, WinDC); ReleaseDC(hwnd, CopyDC); } the line 'delete hBitmap;' causes a runtime error: an access violation. I guess I can't just delete it like that? Because bitmaps take up a lot of space, if I don't get rid of it I will end up with a huge memory leak. My question is: Does releasing the DC the HBITMAP is from deal with this, or does it stick around even after I have released the DC? If the later is the case, how do I correctly get rid of the HBITMAP?

    Read the article

  • IoC - Dynamic Composition of object instances

    - by Joshua Starner
    Is there a way using IoC, MEF [Imports], or another DI solution to compose dependencies on the fly at object creation time instead of during composition time? Here's my current thought. If you have an instance of an object that raises events, but you are not creating the object once and saving it in memory, you have to register the event handlers every time the object is created. As far as I can tell, most IoC containers require you to register all of the classes used in composition and call Compose() to make it hook up all the dependencies. I think this may be horrible design (I'm dealing with a legacy system here) to do this due to the overhead of object creation, dependency injection, etc... but I was wondering if it was possible using one of the emergent IoC technologies. Maybe I have some terminology mixed up, but my goal is to avoid writing a framework to "hook up all the events" on an instance of an object, and use something like MEF to [Export] handlers (dependencies) that adhere to a very specific interface and [ImportMany] them into an object instance so my exports get called if the assemblies are there when the application starts. So maybe all of the objects could still be composed when the application starts, but I want the system to find and call all of them as the object is created and destroyed.

    Read the article

  • Updating multiple related tables in SQLite

    - by PerryJ
    Just some background, sorry so long winded. I'm using the System.Data.SQLite ADO.net adapter to create a local sqlite database and this will be the only process hitting the database, so I don't need to worry about concurrency. I'm building the database from various sources and don't want to build this all in memory using datasets or dataadapters or anything like that. I want to do this using SQL (DdCommands). I'm not very good with SQL and complete noob in sqlite. I'm basically using sqlite as a local database / save file structure. The database has a lot of related tables and the data has nothing to do with People or Regions or Districts, but to use a simple analogy, imagine: Region table with auto increment RegionID, RegionName column and various optional columns. District table with auto increment DistrictID, DistrictName, RegionId, and various optional columns Person table with auto increment PersonID, PersonName, DistrictID, and various optional columns So I get some data representing RegionName, DistrictName,PersonName, and other Person related data. The Region, District and/or Person may or may not be created at this point. Once again, not being the greatest with this, my thoughts would be something like: Check to see if Region exists and if so get the RegionID else create it and get RegionID Check to see if District exists and if so get the DistrictID else create it adding in RegionID from above and get DistrictID Check to see if Person exists and if so get the PersonID else create it adding in DistrictID from above and get PersonID Update Person with rest of data. In MS SQL Server I would create a stored procedure to handle all this. Only way I can see to do this with sqlite is a lot of commands. So I'm sure I'm not getting this. I've spent hours looking around on various sites but just don't feel like I'm going down the right road. Any suggestions would be greatly appreciated.

    Read the article

  • theoretical and practical matrix multiplication FLOP

    - by mjr
    I wrote traditional matrix multiplication in c++ and tried to measure and compare its theoretical and practical FLOP. As I know inner loop of MM has 2 operation therefore simple MM theoretical Flops is 2*n*n*n (2n^3) but in practice I get something like 4n^3 + number of operation which is 2 i.e. 6n^3 also if I just try to add up only one array a[i][j]++ practical flops then calculate like 3n^3 and not n^3 as you see again it is 2n^3 +1 operation and not 1 operation * n^3 . This is in case if I use 1D array in three nested loops as Matrix multiplication and compare flop, practical flop is the same (near) the theoretical flop and depend exactly as the number of operation in inner loop.I could not find the reason for this behaviour. what is the reason in both case? I know that theoretical flop is not the same as practical one because of some operations like load etc. system specification: Intel core2duo E4500 3700g memory L2 cache 2M x64 fedora 17 sample results: Matrix matrix multiplication 512*512 Real_time: 1.718368 Proc_time: 1.227672 Total flpops: 807,107,072 MFLOPS: 657.429016 Real_time: 3.608078 Proc_time: 3.042272 Total flpops: 807,024,448 MFLOPS: 265.270355 theoretical flop: 2*512*512*512=268,435,456 Practical flops= 6*512^3 =807,107,072 Using 1 dimensional array float d[size][size]:512 or any size for (int j = 0; j < size; ++j) { for (int k = 0; k < size; ++k) { d[k]=d[k]+e[k]+f[k]+g[k]+r; } } Real_time: 0.002288 Proc_time: 0.002260 Total flpops: 1,048,578 MFLOPS: 464.027161 theroretical flop: *4n^2=4*512^2=1,048,576* practical flop : 4n^2+overhead (other operation?)=1,048,578 3 loop version: Real_time: 1.282257 Proc_time: 1.155990 Total flpops: 536,872,000 MFLOPS: 464.426117 theoretical flop:4n^3 = 536,870,912 practical flop: *4n^3=4*512^3+overheads(other operation?)=536,872,000* thank you

    Read the article

  • Question - Setting dynamic HTML using Javascript to iFrames on Windows Mobile 6.1 - IE Mobile6

    - by swaroop
    Hi Experts, (excuse me if this is not the right forum to post - i couldn't find anything related to non-native programming and related to this topic) I Am trying to set a dynamic HTML into an iFrame on the webpage. I have tried a couple of things but none of them seem to work. I m able to read the innerHTML but can't seem to update it. // Able to read using document.getElementById('iFrameIdentifier').innerHTML; // On Desktop IE, this code works document.getElementById('iFrameId').contentWindow.document.open(); document.getElementById('iFrameId').contentWindow.document.write(dynamicHTML); document.getElementById('iFrameId').contentWindow.document.close(); Ideally the same function should work as how it works for div's but it says 'Object doesn't support this method or property". I have also tried document.getElementById('iFrameId').document.body.innerHTML. This apparently replaces the whole HTML of the page and not just the innerHTML. I have tried out a couple of things and they didn't work document.getElementById('iFrameId').body.innerHTML document.frames[0].document.body.innerHTML My purpose is to have a container element which can contain dynamic HTML that's set to it. I've been using it well till now when I observed that the setting innerHTML on a div is taking increasing amount of time because of the onClicks or other JS methods that are attached to the anchors and images in the dynamic HTML. Appears the JS methods or the HTML is some how not getting cleaned up properly (memory leak?) Also being discussed - http://www.experts-exchange.com/Programming/Languages/Scripting/JavaScript/Q_26185526.html#a32779090

    Read the article

  • Suggest a good method with least lookup time complexity

    - by Amrish
    I have a structure which has 3 identifier fields and one value field. I have a list of these objects. To give an analogy, the identifier fields are like the primary keys to the object. These 3 fields uniquely identify an object. Class { int a1; int a2; int a3; int value; }; I would be having a list of say 1000 object of this datatype. I need to check for specific values of these identity key values by passing values of a1, a2 and a3 to a lookup function which would check if any object with those specific values of a1, a2 and a3 is present and returns that value. What is the most effective way to implement this to achieve a best lookup time? One solution I could think of is to have a 3 dimensional matrix of length say 1000 and populate the value in it. This has a lookup time of O(1). But the disadvantages are. 1. I need to know the length of array. 2. For higher identity fields (say 20), then I will need a 20 dimension matrix which would be an overkill on the memory. For my actual implementation, I have 23 identity fields. Can you suggest a good way to store this data which would give me the best look up time?

    Read the article

  • Stack and Hash joint

    - by Alexandru
    I'm trying to write a data structure which is a combination of Stack and HashSet with fast push/pop/membership (I'm looking for constant time operations). Think of Python's OrderedDict. I tried a few things and I came up with the following code: HashInt and SetInt. I need to add some documentation to the source, but basically I use a hash with linear probing to store indices in a vector of the keys. Since linear probing always puts the last element at the end of a continuous range of already filled cells, pop() can be implemented very easy without a sophisticated remove operation. I have the following problems: the data structure consumes a lot of memory (some improvement is obvious: stackKeys is larger than needed). some operations are slower than if I have used fastutil (eg: pop(), even push() in some scenarios). I tried rewriting the classes using fastutil and trove4j, but the overall speed of my application halved. What performance improvements would you suggest for my code? What open-source library/code do you know that I can try?

    Read the article

  • Java AtomicInteger: what are the differences between compareAndSet and weakCompareAndSet?

    - by WizardOfOdds
    (note that this question is not about CAS, it's about the "May fail spuriously" Javadoc). The only difference in the Javadoc between these two methods from the AtomicInteger class is that the weakCompareAndSet contains the comment: "May fail spuriously". Now unless my eyes are cheated by some spell, both method do look to be doing exactly the same: public final boolean compareAndSet(int expect, int update) { return unsafe.compareAndSwapInt(this, valueOffset, expect, update); } /* ... * May fail spuriously. */ public final boolean weakCompareAndSet(int expect, int update) { return unsafe.compareAndSwapInt(this, valueOffset, expect, update); } So I realize that "May" doesn't mean "Must" but then why don't we all start adding this to our codebase: public void doIt() { a(); } /** * May fail spuriously */ public void weakDoIt() { a(); } I'm really confused with that weakCompareAndSet() that appears to do the same as the compareAndSet() yet that "may fail spuriously" while the other can't. Apparently the "weak" and the "spurious fail" are in a way related to "happens-before" ordering but I'm still very confused by these two AtomicInteger (and AtomicLong etc.) methods: because apparently they call exactly the same unsafe.compareAndSwapInt method. I'm particularly confused in that AtomicInteger got introduced in Java 1.5, so after the Java Memory Model change (so it is obviously not something that could "fail spuriously in 1.4" but whose behavior changed to "shall not fail spuriously in 1.5").

    Read the article

  • iPhone app doesn't build crash reports

    - by BankStrong
    My app formerly created useful crash logs. I synced my iPhone in the past and found crash logs in library/logs/CrashReporter About a month ago, my app stopped creating crash reports. When I first discovered this problem, I assumed it was due to memory corruption (a possibility in my app). I just created a new project and added a crash to it. // Implement viewDidLoad to do additional setup after loading the view, // typically from a nib. - (void)viewDidLoad { NSMutableArray *array = [[NSMutableArray alloc] init]; [array removeObjectAtIndex:-1]; [super viewDidLoad]; } This app does not create a crash report either. Ideas I've started to explore: My phone is corrupted (tried restoring - somehow I brought it to the state from a few months ago) My XCode is corrupt (tried reinstalling, but current download demands Snow Leopard - and I can't upgrade to Snow Leopard online). This seems possible - I may have messed with device support around a month ago (similar to http://stackoverflow.com/questions/1224867/does-iphone-os-3-0-1-ruin-your-development-phone ) The location for crash logs has somehow moved. Suggestions?

    Read the article

  • Oracle rownum in db2 - Java data archiving

    - by HonorGod
    I have a data archiving process in java that moves data between db2 and sybase. FYI - This is not done through any import/export process because there are several conditions on each table that are available on run-time and so this process is developed in java. Right now I have single DatabaseReader and DatabaseWriter defined for each source and destination combination so that data is moved in multiple threads. I guess I wanted to expand this further where I can have Multiple DatabaseReaders and Multiple DatabaseWriters defined for each source and destination combination. So, for example if the source data is about 100 rows and I defined 10 readers and 10 writer, each reader will read 10 rows and give them to the writer. I hope process will give me extreme performance depending on the resources available on the server [CPU, Memory etc]. But I guess the problem is these source tables do not have primary keys and it is extremely difficult to grab rows in multiple sets. Oracle provides rownum concept and i guess the life is much simpler there....but how about db2? How can I achieve this behavior with db2? Is there a way to say fetch first 10 records and then fetch next 10 records and so on? Any suggestions / ideas ? Db2 Version - DB2 v8.1.0.144 Fix Pack Num - 16 Linux

    Read the article

  • FOR BOUNTY: "QFontEngine(Win) GetTextMetrics failed ()" error on 64-bit Windows

    - by David Murdoch
    I'll add a large bounty to this when Stack Overflow lets me. I'm using wkhtmltopdf to convert HTML web pages to PDFs. This works perfectly on my 32-bit dev server [unfortunately, I can't ship my machine :-p ]. However, when I deploy to the web application's 64-bit server the following errors are displayed: C:\>wkhtmltopdf http://www.google.com google.pdf Loading pages (1/5) QFontEngine::loadEngine: GetTextMetrics failed () ] 10% QFontEngineWin: GetTextMetrics failed () QFontEngineWin: GetTextMetrics failed () QFontEngine::loadEngine: GetTextMetrics failed () QFontEngineWin: GetTextMetrics failed () QFontEngineWin: GetTextMetrics failed () QFontEngineWin: GetTextMetrics failed () QFontEngine::loadEngine: GetTextMetrics failed () ] 36% QFontEngineWin: GetTextMetrics failed () QFontEngineWin: GetTextMetrics failed () // ...etc.... and the PDF is created and saved... just WITHOUT text. All form-fields, images, borders, tables, divs, spans, ps, etc are rendered accurately...just void of any text at all. Server information: Windows edition: Windows Server Standard Service Pack 2 Processor: Intel Xeon E5410 @ 2.33GHz 2.33 GHz Memory: 8.00 GB System type: 64-bit Operating System Can anyone give me a clue as to what is happening and how I can fix this? Also, I wasn't sure what to tag/title this question with...so if you can think of better tags/title comment them or edit the question. :-)

    Read the article

  • Eclipse randomly exits after installation of Blackberry plugin/SDK

    - by canadiancreed
    Hello all Since adding the Blackberry Java classes from their website into eclipse, I've had it where eclipse will randomly close, with no discernible pattern, rhyme, error or reason. Here is the environment/software packages that I am using: Windows XP SP2 Eclipse v3.5.1 Blackberry Java Plugin v1.1.1.200911111641-15 Blackberry Java SDK 4.5.0.21 I've tried the usual steps of complete uninstall and reinstallation of Eclipse and the accompanying plugins on multiple systems with the same configuration, including one that had a fresh install of Windows XP SP2. Upgrading to Eclipse 3.6 didn't work (the plugin wont' install as it's the wrong version), nor the downgrade to 3.4 for the same reason. I also increased the heap size to 512 (system has two gigs of memory) as some research into Eclipse doing this type of thing with Groovy was resolved that way, but again, no dice. Eclipse works great when the blackberry plugins are not installed, and no entries of errors or issues in the event log are helping to show what the issue with these plug-ins might be. So if anyone has ran into this issue, and even better, has a solution, I'd love to hear about it. Thanks in advance. EDIT: An additional to my issue, autoComplete with the Blackberry SDK seems to make this extremely unstable, like almost a guaranteed crash. Is this fixable at all?

    Read the article

  • sqlite3 update text in uitextview

    - by summer
    i had the sqlite statement ready for update..but i am confuse about grabbing text from uitextview and updating it..and i waned to update it using a uibutton..how do i carry on after creating the sql statement???kinda lost..any new solution is appreciate.. - (void) saveAllData { if(isDirty) { if(updateStmt == nil) { const char *sql = "update Snap Set snapTitle = ?, snapDesc = ?, Where snapID = ?"; if(sqlite3_prepare_v2(database, sql, -1, &updateStmt, NULL) != SQLITE_OK) NSAssert1(0, @"Error while creating update statement. '%s'", sqlite3_errmsg(database)); } sqlite3_bind_text(updateStmt, 1, [snapTitle UTF8String], -1, SQLITE_TRANSIENT); sqlite3_bind_text(updateStmt, 2, [snapDescription UTF8String], -2, SQLITE_TRANSIENT); sqlite3_bind_int(updateStmt, 3, snapID); if(SQLITE_DONE != sqlite3_step(updateStmt)) NSAssert1(0, @"Error while updating. '%s'", sqlite3_errmsg(database)); sqlite3_reset(updateStmt); isDirty = NO; } //Reclaim all memory here. [snapTitle release]; snapTitle = nil; [snapDescription release]; snapDescription = nil; //isDetailViewHydrated = NO; }

    Read the article

  • AST with fixed nodes instead of error nodes in antlr

    - by ahe
    I have an antlr generated Java parser that uses the C target and it works quite well. The problem is I also want it to parse erroneous code and produce a meaningful AST. If I feed it a minimal Java class with one import after which a semicolon is missing it produces two "Tree Error Node" objects where the "import" token and the tokens for the imported class should be. But since it parses the following code correctly and produces the correct nodes for this code it must recover from the error by adding the semicolon or by resyncing. Is there a way to make antlr reflect this fixed input it produces internally in the AST? Or can I at least get the tokens/text that produced the "Tree Node Errors" somehow? In the C targets antlr3commontreeadaptor.c around line 200 the following fragment indicates that the C target only creates dummy error nodes so far: static pANTLR3_BASE_TREE errorNode (pANTLR3_BASE_TREE_ADAPTOR adaptor, pANTLR3_TOKEN_STREAM ctnstream, pANTLR3_COMMON_TOKEN startToken, pANTLR3_COMMON_TOKEN stopToken, pANTLR3_EXCEPTION e) { // Use the supplied common tree node stream to get another tree from the factory // TODO: Look at creating the erronode as in Java, but this is complicated by the // need to track and free the memory allocated to it, so for now, we just // want something in the tree that isn't a NULL pointer. // return adaptor->createTypeText(adaptor, ANTLR3_TOKEN_INVALID, (pANTLR3_UINT8)"Tree Error Node"); } Am I out of luck here and only the error nodes the Java target produces would allow me to retrieve the text of the erroneous nodes?

    Read the article

  • How can I get PowerShell Added-Types to use Added References

    - by Scott Weinstein
    I'm working on a PoSh project that generates CSharp code, and then Add-Types it into memory. The new types use existing types in an on disk DLL, which is loaded via Add-Type. All is well and good untill I actualy try to invoke methods on the new types. Here's an example of what I'm doing: $PWD = "." rm -Force $PWD\TestClassOne* $code = " namespace TEST{ public class TestClassOne { public int DoNothing() { return 1; } } }" $code | Out-File tcone.cs Add-Type -OutputAssembly $PWD\TestClassOne.dll -OutputType Library -Path $PWD\tcone.cs Add-Type -Path $PWD\TestClassOne.dll $a = New-Object TEST.TestClassOne "Using TestClassOne" $a.DoNothing() "Compiling TestClassTwo" Add-Type -Language CSharpVersion3 -TypeDefinition " namespace TEST{ public class TestClassTwo { public int CallTestClassOne() { var a = new TEST.TestClassOne(); return a.DoNothing(); } } }" -ReferencedAssemblies $PWD\TestClassOne.dll "OK" $b = New-Object TEST.TestClassTwo "Using TestClassTwo" $b.CallTestClassOne() Running the above script gives the following error on the last line: Exception calling "CallTestClassOne" with "0" argument(s): "Could not load file or assembly 'TestClassOne,...' or one of its dependencies. The system cannot find the file specified." At AddTypeTest.ps1:39 char:20 + $b.CallTestClassOne <<<< () + CategoryInfo : NotSpecified: (:) [], MethodInvocationException + FullyQualifiedErrorId : DotNetMethodException What am I doing wrong?

    Read the article

  • Am I deleting this properly?

    - by atch
    I have some struct: struct A { const char* name_; A* left_; A* right_; A(const char* name):name_(name), left_(nullptr), right_(nullptr){} A(const A&); //A(const A*);//ToDo A& operator=(const A&); ~A() { /*ToDo*/ }; }; /*Just to compile*/ A& A::operator=(const A& pattern) { //check for self-assignment if (this != &pattern) { void* p = new char[sizeof(A)]; } return *this; } A::A(const A& pat) { void* p = new char[sizeof(A)]; A* tmp = new (p) A("tmp"); tmp->~A(); delete tmp;//I WONDER IF HERE I SHOULD USE DIFFERENT delete[]? } int _tmain(int argc, _TCHAR* argv[]) { A a("a"); A b = a; cin.get(); return 0; } Guys I know this is far from ideal and far from finished. But please don't tell me the answer how to do it properly. I'm trying to figure it out myself. The only think I would like to know if I'm deleting my memory in proper way. Thanks.

    Read the article

  • Best way to manipulate and compare strings

    - by vtortola
    I'm developing a REST service, so a request could be something like this: /Data/Main/Table=Customers/ I need to get the segments one by one, and for each segment I will decide wich object I'm going to use, after I'll pass to that object the rest of the query so it can decide what to do next. Basically, the REST query is a path on a tree :P This imply lots String operations (depending on the query complexity), but StringBuilder is useful just for concatenations and remove, you cannot perform a search with IndexOf or similar. I've developed this class that fulfill my requirement, but the problem is that is manipulating Strings, so every time I get one segment ... I'll create extra Strings because String is an inmutable data type: public class RESTQueryParser { String _query; public RESTQueryParser(String query) { _query = query; } public String GetNext() { String result = String.Empty; Int32 startPosition = _query.StartsWith("/", StringComparison.InvariantCultureIgnoreCase) ? 1 : 0; Int32 i = _query.IndexOf("/", startPosition, StringComparison.InvariantCultureIgnoreCase) - 1; if (!String.IsNullOrEmpty(_query)) { if (i < 0) { result = _query.Substring(startPosition, _query.Length - 1); _query = String.Empty; } else { result = _query.Substring(startPosition, i); _query = _query.Remove(0, i + 1); } } return result; } } The server should support a lot of calls, and the queries could be huge, so this is gonna be a very repetitive task. I don't really know how big is the impact on the memory and the performance, I've just readed about it in some books. Should I implement a class that manage a Char[] instead Strings and implement the methods that I want? Or should be ok with this one? Regular expressions maybe?

    Read the article

  • Required Working Precision for the BBP Algorithm?

    - by brainfsck
    Hello, I'm looking to compute the nth digit of Pi in a low-memory environment. As I don't have decimals available to me, this integer-only BBP algorithm in Python has been a great starting point. I only need to calculate one digit of Pi at a time. How can I determine the lowest I can set D, the "number of digits of working precision"? D=4 gives me many correct digits, but a few digits will be off by one. For example, computing digit 393 with precision of 4 gives me 0xafda, from which I extract the digit 0xa. However, the correct digit is 0xb. No matter how high I set D, it seems that testing a sufficient number of digits finds an one where the formula returns an incorrect value. I've tried upping the precision when the digit is "close" to another, e.g. 0x3fff or 0x1000, but cannot find any good definition of "close"; for instance, calculating at digit 9798 gives me 0xcde6 , which is not very close to 0xd000, but the correct digit is 0xd. Can anyone help me figure out how much working precision is needed to calculate a given digit using this algorithm? Thank you,

    Read the article

  • Haskell Linear Algebra Matrix Library for Arbitrary Element Types

    - by Johannes Weiß
    I'm looking for a Haskell linear algebra library that has the following features: Matrix multiplication Matrix addition Matrix transposition Rank calculation Matrix inversion is a plus and has the following properties: arbitrary element (scalar) types (in particular element types that are not Storable instances). My elements are an instance of Num, additionally the multiplicative inverse can be calculated. The elements mathematically form a finite field (??2256). That should be enough to implement the features mentioned above. arbitrary matrix sizes (I'll probably need something like 100x100, but the matrix sizes will depend on the user's input so it should not be limited by anything else but the memory or the computational power available) as fast as possible, but I'm aware that a library for arbitrary elements will probably not perform like a C/Fortran library that does the work (interfaced via FFI) because of the indirection of arbitrary (non Int, Double or similar) types. At least one pointer gets dereferenced when an element is touched (written in Haskell, this is not a real requirement for me, but since my elements are no Storable instances the library has to be written in Haskell) I already tried very hard and evaluated everything that looked promising (most of the libraries on Hackage directly state that they wont work for me). In particular I wrote test code using: hmatrix, assumes Storable elements Vec, but the documentation states: Low Dimension : Although the dimensionality is limited only by what GHC will handle, the library is meant for 2,3 and 4 dimensions. For general linear algebra, check out the excellent hmatrix library and blas bindings I looked into the code and the documentation of many more libraries but nothing seems to suit my needs :-(. Update Since there seems to be nothing, I started a project on GitHub which aims to develop such a library. The current state is very minimalistic, not optimized for speed at all and only the most basic functions have tests and therefore should work. But should you be interested in using or helping out developing it: Contact me (you'll find my mail address on my web site) or send pull requests.

    Read the article

< Previous Page | 421 422 423 424 425 426 427 428 429 430 431 432  | Next Page >