Search Results

Search found 21885 results on 876 pages for 'radix point'.

Page 425/876 | < Previous Page | 421 422 423 424 425 426 427 428 429 430 431 432  | Next Page >

• Browsing is much slower on one PC wired to the same router - why?

  - by deanalt

  Wife is not happy. It takes about 5 seconds to open a google window, versus about 1 second on the faster computer which is about 3 years old itself. Yes, it is an older computer (5 -6 years old, I'd guess), surely with less RAM, but for simple browsing, should it matter? Both are hardwired to the same Netgear Rangemax router. Both use fixed IP addresses. Both are XP. Both have about 8 feet of cable to the router. I have the fastest service my cable provides. Probably irrelevant but ...two newer MACs are connected wirelessely during the summer and they are even faster, but I think that's the difference in browsers. If you could point me to a list of process of elimination steps that would be most appreciated. Thanks Dean

  Read the article

• Cloning my Windows boot drive--Windows hangs on booting off new drive.

  - by idyllhands

  I copied my Windows XP partition to a new drive using GParted live CD (using the GUI). I made sure to flag it as boot, and then used my XP disc to enter Recovery Console and ran fixboot and fixmbr on it. Now, it will boot up to the Windows flash screen, but hangs at that point. Any suggestions on how to proceed? I am just trying to come up with a quick way to clone my system and make the drive bootable, and gParted seemed like the easiest way, but now I've been working on it for over an hour.

  Read the article

• I keep getting OpenSSL Header Version not found error when compiling OpenSSH Debian Squeeze

  - by Romoku

  I built Openssl1.0.0d ./config shared no-threads zlib It installed fine to the default /usr/local/ssl I went and downloaded OpenSSH 5.8p2 and ran ./configure but now it keeps giving me a Openssl version header not found error even when I set --with-ssl-dir= I've tried it with arguments /usr/local/ssl/include /usr/local/ssl/include/openssl /usr/include /usr/local/ssl/lib I looked in config.log and found error: openssl/opensslv.h: no such file or directory which makes little sense since I pointed openssh to where it is store. /etc/ld.so.conf include /usr/local/ssl/lib I'm at a loss at this point. Answer (maybe): Because I am an idiot. include /usr/local/ssl/lib is incorrect. /usr/local/ssl/lib is correct. It needs to be before the first include.

  Read the article

• Building a List of All SharePoint Timer Jobs Programmatically in C#

  - by Damon

  One of the most frustrating things about SharePoint is that the difficulty in figuring something out is inversely proportional to the simplicity of what you are trying to accomplish.  Case in point, yesterday I wanted to get a list of all the timer jobs in SharePoint.  Having never done this nor having any idea of exactly how to do this right off the top of my head, I inquired to Google.  I like to think my Google-fu is fair to good, so I normally find exactly what I'm looking for in the first hit.  But on the topic of listing all SharePoint timer jobs all it came up with a PowerShell script command (Get-SPTimerJob) and nothing more. Refined search after refined search continued to turn up nothing. So apparently I am the only person on the planet who needs to get a list of the timer jobs in C#.  In case you are the second person on the planet who needs to do this, the code to do so follows: SPSecurity.RunWithElevatedPrivileges(() => {    var timerJobs = new List();    foreach (var job in SPAdministrationWebApplication.Local.JobDefinitions)    {       timerJobs.Add(job);    }    foreach (SPService curService in SPFarm.Local.Services)    {       foreach (var job in curService.JobDefinitions)       {          timerJobs.Add(job);       }     } }); For reference, you have the two for loops because the Central Admin web application doesn't end up being in the SPFarm.Local.Services group, so you have to get it manually from the SPAdministrationWebApplication.Local reference.

  Read the article

• Is there any chance that my data will get silently corrupted with a robocopy SMB network transfer?

  - by Archagon

  I'm setting up a NAS box for the first time. At the moment, I have most of my data backed up to a few local hard drives, and I intend to transfer all the data to my NAS over ethernet once the RAID array is setup. Since this is all happening over the network, I'm a bit worried about my data getting corrupted silently during transfer. From what I understand, data generally doesn't get corrupted without notice on local transfers because a checksum is performed at some point by the drive or the OS. (This could be totally wrong.) Does the same thing happen with SMB, or is it up to the transferrer to check the integrity of their data? And if it doesn't happen with SMB, is there a protocol that does ensure data integrity? I know that rsync can checksum a transfer, but I'm on Windows and I already have a robocopy configuration that I like. Will my data be safe or do I have to use an external checksum tool to make sure?

  Read the article

• Is there a simple, flat, XML-based query-able data storage solution? [closed]

  - by alex gray

  I have been in long pursuit of an XML-based query-able data store, and despite continued searches and evaluations, I have yet to find a solution that meets the my needs, which include: Data is wholly contained within XML nodes, in flat text files. There is a "native" - or at least unobtrusive - method with which to perform Create/Read/Update/Delete (CRUD) operations onto the "schema". I would consider access via http, XHR, javascript, PHP, BASH, or PERL to be unobtrusive, dependent on the complexity of the set of dependencies. Server-side file-system reads and writes. A client-side interface element, accessible in any browser without a plug-in. Some extra, preferred (but optional) requirements include: Respond to simple SQL, or similarly syntax queries. Serve the data on a bare bones https server, with no "extra stuff", either via XMLHTTPRequest, HTTP proper, or JSON. A few thoughts: What I'm looking for may be possible via some Java server implementations, but for the sake of this question, please do not suggest that - unless it meets ALL the requirements. Java, especially on the client-side is not really an option, nor is it appealing from a development viewpoint.* I know walking the filesystem is a stretch, and I've heard it's possible with XPATH or XSLT, but as far as I know, that's not ready for primetime, nor even yet a recommendation. However the ability to recursively traverse the filesystem is needed for such a system to be of useful facility. At this point, I have basically implemented what I described via, of all things, CGI and Bash, but there has to be an easier way. Thoughts?

  Read the article

• Fresh install of 64 bit 12.04 over 32 bit 11.10 alongside Windows 7

  - by Pareen

  I currently have Ubuntu 11.10 32 bit and Windows 7 dual boot in separate partitions. I am trying to do a fresh install of Ubuntu 12.04 64 bit (mistakenly installed the 32 bit 11.10 a little while ago.. I need a 64 bit version to support AOSP build) OVER my the exisiting 11.10 partition. I have referenced How to Install fresh 12.04 install to a PC with dual booting Windows 7 & Ubuntu11.10?, as well as other posts on using the Live CD to do a fresh install. However, the problem I am experiencing is when I bring up the install screen, it says the following: This computer has multiple operating systems on it. What would you like to do. (3 options) Install Ubuntu 12.04 alongside them Replace all with Ubuntu 12.04 (Warning, this will delete files across ALL operating systems) Something else (you can create or resize partitions yourself) This is different from what is in other posts, as mine states that there are "multiple O.Ses" and doesnt individually allow me to replace the Ubuntu 11.10. I don't want to replace ALL O.S.es: I need to preserve Windows 7 and am only trying to replace the old Ubuntu 11.10 partition with the new 12.04 64 bit. I did have Ubuntu installed via Wubi (I believe it was 10.04) prior to putting 11.10 in a separate partition, but I have removed it via Add/Remove programs in Windows. I was wondering how to go about doing this... Should I use the "Something else" option to bring up the partition manager, and just assign my existing 11.10 partition with root mount point + swap space. Will this do the same thing by overwriting with fresh 12.04 install?? I appreciate all your help.

  Read the article

• ssh freezes when trying to connect to some hosts

  - by NS Gopikrishnan

  When I try to ssh to particular machine/s in a list, The SSH command happens to be freezing. I tried out setting ssh timeout. But then also it's freezes even after the timeout. In verbose mode : OpenSSH_3.9p1, OpenSSL 0.9.7a Feb 19 2003 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to x358.x.server.com [10.x.x.x] port 22. debug1: fd 3 clearing O_NONBLOCK debug1: Connection established. debug1: identity file /export/home/sqlrpt/.ssh/identity type -1 debug1: identity file /export/home/sqlrpt/.ssh/id_rsa type -1 debug1: identity file /export/home/sqlrpt/.ssh/id_dsa type 2 At this point it freezes. A work around I thought was to create a child process for each ssh calls and if the process doesn't respond after a timeout - Kill it. But are there any less complex ways, so that I can accommodate it in a shell script itself rather than going for a C/C++ program ?

  Read the article

• Manually forcing TCP connection to retry

  - by Vi.

  I have a TCP connection (SSH session to some computer for example) Network suddenly goes down and drops all packets (disconnected cable, out of range). TCP resends packets again and again, retrying with increasing delays. I see the problem and plug the cable back (or restore network somehow). TCP connection finally successfully resends some packet and continues. The problem is that I need to wait for a some timeout on point 5. I want to use my opened SSH session now and not wait for 5-10 seconds until it finds out that connection is working again. How to force all TCP connections to resend data without delays in GNU/Linux?

  Read the article

• WinXP workgroup, 3 routers 3 computers

  - by Silvera

  I have 3 computers with WinXP x86, and 3 Cisco 1800 series routers. I'm trying to create a workgroup so that the 3 computers can share files with eachother. They can ping eachother (without any internet connection), and the routers setup is correctly configured (with interfaces, ip adresses, and ports). But none of the computers can see eachother, even though they are on the same network. My first question would be - can it be done the way it is currently configured - and, if yes, how, or can anyone point me in the right direction?

  Read the article

• Dropbox fails to install on Ubuntu 13.10

  - by Fraxav

  I've done some research and it seems Dropbox has some problems with the status icon on Ubuntu 13.10, but I can't even manage to install it. The very first time, I installed nautilus-dropbox from the app center on a freshly installed Saucy, but I couldn't see the status icon and clicking the app icon wouldn't help, so I uninstalled and rebooted. The second and third time, the app just freezed at about 75% while installing from app manager, so I had to shut down the computer and uninstall. Next I tried to install dropbox from the .deb (from website): it installed (the launcher?) from app manager, then the dialog prompted me to start dropbox and finally to download the official daemon, but the download freezed at 0% and made everything else buggy/laggy (probably also because I restarted nautilus, as required, at that point). After a purge and clean from terminal, some icons and this file (which I suspect is somehow responsible, but of course is locked) are still present on my computer. Can anyone help me figure how how to install it? How could I remove that configuration file so I can give it a last shot?

  Read the article

• Working with Git on multiple machines

  - by Tesserex

  This may sound a bit strange, but I'm wondering about a good way to work in Git from multiple machines networked together in some way. It looks to me like I have two options, and I can see benefits on both sides: Use git itself for sharing, each machine has its own repo and you have to fetch between them. You can work on either machine even if the other is offline. This by itself is pretty big I think. Use one repo that is shared over the network between machines. No need to do git pulls every time you switch machines, since your code is always up to date. Never worry that you forgot to push code from your other non-hosting machine, which is now out of reach, since you were working off a fileshare on this machine. My intuition says that everyone generally goes with the first option. But the downside I see is that you might not always be able to access code from your other machines, and I certainly don't want to push all my WIP branches to github at the end of every day. I also don't want to have to leave my computers on all the time so I can fetch from them directly. Lastly a minor point is that all the git commands to keep multiple branches up to date can get tedious. Is there a third handle on this situation? Maybe some third party tools are available that help make this process easier? If you deal with this situation regularly, what do you suggest?

  Read the article

• PC Speaker sounds when machine locks up.

  - by d.c

  What would cause my PC speaker to sound a low frequency continuous tone as my system locks up? Generally what will happen is I'll notice the application I'm using will stop responding but explorer will be partially responsive, then after a few more actions explorer stops responding, and the last click will cause the pc speaker to emit a low constant tone as the machine locks up completely. The only resolve at that point is to restart. Its not a thermal issue, I'm reading the cpu, and hdd temps with software and hardware monitors. AV and malware scans come up clean. I've swapped out my ram, reseated all my components. Used sfc with no results. chkdisk locks up at 3% and defragmenting does the same, but I can read the drive without trouble (I know this as I've done av/malware scans and I also backed everything up since this started happening) I'm mostly just interested to learn, if anyone knows, why the pc speaker would sound during the lock up. windows xp sp2

  Read the article

• Xen find VBD id for physical disks

  - by Joe

  I'm starting a xen domU using xm create config.cfg. Within the config file are a number of physical block devices (LVs) which are added to the guest and can be accessed fine when it boots. However, at a point in the future I need to be able to hot unplug one of these disks using the xm block-detach command. This command, however, requires the vbd id of the device to be detached and I can't find a way to find the device id for a particular disk 'plugged in' at start up. Any help is much appreciated!

  Read the article

• Locale number formatting issue windows 2008

  - by kris

  On a project we have multiple servers running windows 2008. The servers are using the Russian locale. We have several programs that use floating point numbers but the fractional part of the number on SOME servers is getting truncated. Through the regional settings each machine has: Locale: Russian Current Location: United States Decimal Symbol: . (period) I've tried distributing the changes through "Copy Settings" and even though the procedure works it seems like the settings aren't actually being propagated. So next I went into the registry. There is a key called "sDecimal" and in all cases on all servers the value in the key is '.' There is no difference that I can find between the servers that DO have correct decimal formatting and DO NOT. Any advice on where I can look for a problem like this?

  Read the article

• Shoring up deficiencies in a "home grown" programmer?

  - by JohnP

  I started out by teaching myself BASIC on a Vic 20, and in college (mid 80's) I had Fortran, Pascal, limited C, machine and assembler (With a smattering of COBOL). I didn't touch programming from approx 1989 to 1999. At that point, I was lucky enough to get hired as a Clipper programmer. Took me about 6 months to learn most of it, and by now (13 yrs) I'm pretty expert in it. I have also picked up Cold Fusion, some C#, some ASP, SQL, etc. I know programming structures, but in most languages I'm missing the esoterics, and I know my code could be much tighter. The problem is that I've learned what I needed to, to get the job done. This results in a lot of gaps in practical knowledge. I am also missing out on a TON of theory. Things like SRP, Refactoring, etc are alien terms. (Although I grok the intent after a short read). In addition, I am in the position now of teaching junior programmers the company and our software, and I don't want to pass on the knowledge gaps. I know this is somewhat of a subjective question and may be closed, but how do you go back and pick up what you've missed?

  Read the article

• Windows 8 stuck installing update

  - by Marcom

  I just restarted my laptop to finish installing a Windows update and now it is stuck on please wait. I have tried a system restore but there is only one restore point in the list and it does not work for some reason... I also tried to do a refresh but it asks me for media. I plug in the usb I used to install windows 8 a while and go and says that the media failed to load. I'm kind of stuck on options now. I can't boot and I can't restore and it seems I cant format either! Is there anything anything else I can do to get things going?! I'm running Windows 8 on a dell xps 14 ultrabook. Win 8 is installed on an msata drive and booting using EFi.

  Read the article

• How to set the network profile of Windows 7 via group policy?

  - by Ricket

  We are deploying client computers and in testing noticed that the first time the user logs into the computer, it asks them if the location is a home, work, or public location. We are worried that some users in our workplace might misread it (or not read it at all) and click Public, thus likely denying our access to the computer and messing up security settings and such. Can we set our network to be a "Work Network" location via group policy or some other mechanism of our Windows Domain so that the user is not prompted when connected to our network? Also these are laptops, so we don't want every network they connect to be set as work network, and we have several access points (wired and three wireless) which our users often switch between so I'm not yet sure if it reprompts with each access point but I have the feeling it will, and I would like all of these to be set to the Work profile type.

  Read the article

• reinstall PHP as apache module

  - by Ewan

  Hi sorry for the newbie question, I am not a sys admin by any means. I recently set up a VPS with webmin/virtualmin. Our CMS of choice says that PHP needs to be run as an Apache module in order to run. It says: Recompile PHP with the flag --with-apxs I've googled but can't find how to do this particularly. I think I installed PHP using "yum install php" or thru webmin, but can't remember exactly. Appreciate if anyone can point me in the right direction.

  Read the article

• Unable to view 2 local sites over network

  - by gentrobot

  I have 2 websites running on my local machine that I'd like to view from other machines on the same network. For /etc/apache2/sites-available/site1.com: <VirtualHost *:80> ServerName site1.com DocumentRoot /var/www/answers/app/webroot DirectoryIndex index.php <Directory "/var/www/answers/app/webroot"> Options FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> For /etc/apache2/sites-available/site1.com: <VirtualHost *:80> ServerName site2.com DocumentRoot /var/www/answers2/app/webroot DirectoryIndex index.php <Directory "/var/www/answers2/app/webroot"> Options FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> I have added 2 entries in the /etc/hosts file as: 127.0.0.1 site1.com 127.0.0.1 site2.com Now, when I point the browser on my machine to site1.com, it shows me the first site and pointing the browser to site2.com, it shows me the second site. However,when I type in the local IP of my machine in the browser, it always shows site2. How can I change it to switch between site1 and site2 ? Is there a way that I can view both the sites form another machine (esp. mobile devices over wireless network) ?

  Read the article

• Looking for an example of how a software project can be managed/deployed

  - by rguilbault

  My company is evaluating adopting off-the-shelf ALM products to aid in our development lifecycle; we currently use our own homegrown solutions to manage requirements gathering, specification documentation, testing, etc. One of the issues I am having is understanding how to move code between stages of development. We have what we call a pipeline, which consists of particular stops: [Source] - [QC] - [Production] At the first stop, the developer works out a solution to some requested change and performs individual testing. When that process is complete (and peer review has been performed), our ALM system physically moves the affected programs from the [Source] runtime environment to the [QC] runtime environment. This movement of code is triggered by advancing the status of the change request to match the stage of the pipeline. I have been searching the internet for a few days trying to find how the process is accomplished elsewhere -- I have read a bit about builds, automated testing, various ALM products, etc. but nowhere does any of this state how builds interact with initial change requests, what the triggers are, how dependencies are managed, how the various forms of testing are accommodated (e.g. unit testing, integration testing, regression testing), etc. Can anyone point me to any resources detailing specific workflows or attempt to explain (generically) how a change could/should be tracked and moved though the development lifecycle? I'd be very appreciative. Note: I've cleaned up the question to hopefully make it easier to understand. Also, I found another question (which I can't find now) that referenced this book, which sounds like it might be exactly what I am looking for -- not sure if I want to shell out the cash for it, though.

  Read the article

• JiglibX addition to existing project questions

  - by SomeXnaChump

  Got a very simple existing project, that basically contains a lot of cubes. Now I am wanting to add a physics system to it and JiglibX seemed like the simplest one with some tutorials out there. My main problem is that the physics don't seem to be working how I imagined, I expected my tower of cubes to come crashing down, but they dont seem to do anything. I think my problem is that my cubes do not inherit DrawableGameComponent, they are managed by a world object that will update and render them. So they are at no point put into the games component list. I am not sure if this means that JiglibX will not be able to interact with them as in all the tutorials there are no explicit calls to add the Body objects to the physics system, so I can only presume that they are using a static/singleton under the hood which automatically hooks in all things, or they use the game objects component list somehow. I also noticed that in alot of the tutorials they use the following when setting up the physics system: float timeStep = (float)gameTime.ElapsedGameTime.Ticks / TimeSpan.TicksPerSecond; PhysicsSystem.CurrentPhysicsSystem.Integrate(timeStep); Would it not be better to keep a local instance of the created PhysicsSystem object and just call myPhysicsSystem.Integrate(timeStep)?

  Read the article

• Suggestion of device WiFi range in it's spec. Possible?

  - by SeeR

  I have router Draytek Vigor 2100VG at home almost in the center of it. The farthest point at my home is my balcony, ~12m from it. I have constant wifi signal range problems with some of my devices, but not with others. Notebook Lenovo W510 - no problems Nokia Home Music - always on 10m - no problems Sony PS3 - always on 7m - no problems Sony tablet S - problems around 6m Sony PSP - problems around 8m Sony PS Vita - problems around 8m Nokia E63 - problems around 8m I'm curious why my Notebook don't have any problems even on the balcony? I guess it has better hardware or uses more power for transmission. This information is really important when you want to buy new device/computer, so my real question is: Can device wifi range can somehow be found/suggested from official hardware technical specification? If not Is there some web page with wifi range reviews?

  Read the article

• How do I daemonify my daemon?

  - by jonobacon

  As part of the Ubuntu Accomplishments system I have a daemon that runs as well as a client that connects to it. The daemon is written in Python (using Twisted) and provides a dbus service and a means of processing requests from the clients. Right now the daemon is just a program I run before I run the client and it sets up the dbus service and provides an API that can be used by the clients. I want to transform this into something that can be installed and run as a system service for the user's session (e.g. starting on boot) and providing a means to start and stop it etc. The problem is, I am not sure what I need to do to properly daemonify it so it can run as this service. I wanted to ask if others can provide some guidance. Some things I need to ask: How can I treat it as a service that is run for the current user service (not a system service right now)? How do I ensure I can start, stop, and restart this session service? When packaging this, how do I ensure that it installs it as a service for the user's session and is started on login etc? In responding, if you can point me to specific examples or solutions I need to implement, that would be helpful. :-) Thanks! Jono

  Read the article

• Dual boot UEFI Windows 7 and Ubuntu 12.04 (both 64 bits). W7 entry doesn't appear in GRUB

  - by Joe

  After trying to install both OS during 2 days, I'm confused and getting mad... I have SSD 128 GB and HDD 500 GB both empty. My laptop is Asus K55VM. BIOS support UEFI. What I have done: Install new SSD (Samsung 830 128GB) Use GParted on liveCD to create new table of partitions (GPT) and create 3 partitions (in the SSD) for different purposes: Partition 1: 80 GB (w7); Partition 2: 30 GB (Ubuntu 12.04 -Just / -); Partition 3: 10 GB unused (for future extesion of the other partitions) Install Windows 7 (with UEFI) in Partition 1. This create: /dev/sda1 - 100 MB for System (UEFI boot I guess) - FAT32 /dev/sda2 - 100 MB aprox. for MSR /dev/sda3 - 79.800 MB aprox. for Windows7 data In this point everything works fine. I have W7. Now I install Ubuntu 12.04 amd64 (with UEFI) as follows: Install / in Partition 2 - /dev/sda4 30 GB ext4, and in the hdd I install /home and swap. I select bootloader in /dev/sda1 (where it's supposed to be the UEFI boot). I install updates and reboot. Problem: Now just appears grub menu with Ubuntu entries and not Windows 7. Alternative solution found: When I turn on laptop, before loading GRUB I press ESC key and appear BIOS boot, so I can select to boot the Windows partition, Ubuntu partition, DVD, USB, etc... but I think is not the best way to boot different OS. I've tried: sudo update-grub2 with no success. What can I do??

  Read the article

< Previous Page | 421 422 423 424 425 426 427 428 429 430 431 432  | Next Page >