Search Results

Search found 25263 results on 1011 pages for 'copy paste programming'.

Page 426/1011 | < Previous Page | 422 423 424 425 426 427 428 429 430 431 432 433  | Next Page >

  • Unable to boot to Ubuntu

    - by nsk
    Just got a new laptop and removed Windows 8 and installed 13.10 using LiveUSB. Initially it was booting to "No boot media" but I was able to resolve it with boot-repair. I realized some of the items I need isn't supported on 13.10, so attempted to install 13.04 instead. Now without LiveUSB, the laptop just boots to "No boot media" but boot repair doesn't seem to be fixing it. Tried going back to 13.10, but no dice. After boot repair it says "Please do not forget to make your BIOS boot on sda1/EFI/ubuntu/grubx64.efi file!". GParted shows sda1 has the boot flag. Using Toshiba Satellite P50. Secure Boot disabled. UEFI enabled. Any help would be highly appreciated. http://paste.ubuntu.com/6366556/

    Read the article

  • Converting lib from other language to python and Rights issue

    - by Arruda
    If I take a program, and basically translate its source from some language to python, with some small changes, can I do a entirely my new lib or I have to make a "version" of the old one? would this be a copy of the first or a new lib based in the ideas of the first? OBS: Consider the original lib is using Apache License v2 Not sure if well explained, but I can't see for now how to make it more clear.

    Read the article

  • Is this a pattern? Should it be?

    - by Arkadiy
    The following is more of a statement than a question - it describes something that may be a pattern. The question is: is this a known pattern? Or, if it's not, should it be? I've had a situation where I had to iterate over two dissimilar multi-layer data structures and copy information from one to the other. Depending on particular use case, I had around eight different kinds of layers, combined in about eight different combinations: A-B-C B-C A-C D-E A-D-E and so on After a few unsuccessful attempts to factor out the repetition of per-layer iteration code, I realized that the key difficulty in this refactoring was the fact that the bottom level needed access to data gathered at higher levels. To explicitly accommodate this requirement, I introduced IterationContext class with a number of get() and set() methods for accumulating the necessary information. In the end, I had the following class structure: class Iterator { virtual void iterateOver(const Structure &dataStructure1, IterationContext &ctx) const = 0; }; class RecursingIterator : public Iterator { RecursingIterator(const Iterator &below); }; class IterateOverA : public RecursingIterator { virtual void iterateOver(const Structure &dataStructure1, IterationContext &ctx) const { // Iterate over members in dataStructure1 // locate corresponding item in dataStructure2 (passed via context) // and set it in the context // invoke the sub-iterator }; class IterateOverB : public RecursingIterator { virtual void iterateOver(const Structure &dataStructure1, IterationContext &ctx) const { // iterate over members dataStructure2 (form context) // set dataStructure2's item in the context // locate corresponding item in dataStructure2 (passed via context) // invoke the sub-iterator }; void main() { class FinalCopy : public Iterator { virtual void iterateOver(const Structure &dataStructure1, IterationContext &ctx) const { // copy data from structure 1 to structure 2 in the context, // using some data from higher levels as needed } } IterationContext ctx(dateStructure2); IterateOverA(IterateOverB(FinalCopy())).iterate(dataStructure1, ctx); } It so happens that dataStructure1 is a uniform data structure, similar to XML DOM in that respect, while dataStructure2 is a legacy data structure made of various structs and arrays. This allows me to pass dataStructure1 outside of the context for convenience. In general, either side of the iteration or both sides may be passed via context, as convenient. The key situation points are: complicated code that needs to be invoked in "layers", with multiple combinations of layer types possible at the bottom layer, the information from top layers needs to be visible. The key implementation points are: use of context class to access the data from all levels of iteration complicated iteration code encapsulated in implementation of pure virtual function two interfaces - one aware of underlying iterator, one not aware of it. use of const & to simplify the usage syntax.

    Read the article

  • error: no device connected

    - by Prabath Swarna
    I did a fresh install of 12.04 and it went fine, worked on it for several days, but one day the browser crashed and i reset the machine, after that I get this error when i boot; error: no device connected error: no device connected error: no device connected error: no device connected This comes after the BIOS confirmation, and it stays for about 30 seconds, then the grub menu comes and when I selected the default the screen becomes purple and stays like that for a whole Minuit. I thought maybe that is because I have 500GB HDD so i ran the boot-repair, It did nothing at all. I'm sure I did the boot-repair thing right, sorry I forgot the paste URL. If i reinstalled will this error persist.

    Read the article

  • Why wont SVN work on the Google Code Source? [closed]

    - by BluFire
    I installed SVN Toroise. I then proceeded to the desktop and right clicked and clicked on SVN checkout. I then entered under the URL of Repository "http://apple-crunch.googlecode.com/svn/trunk/ apple-crunch-read-only" but after a few seconds the checkout fails saying that the URL doesn't exist. I got the command line from http://code.google.com/p/apple-crunch/source/checkout I'm trying to get a direct copy instead of browsing through the source.

    Read the article

  • I've had some free time at work during maintenance releases, but all I do is surf the Internet.

    - by hal10001
    I'm really having trouble with this, since it is the perfect opportunity to learn something new, begin a personal project... essentially do just about anything, but all I do is surf the Internet. I find that I don't want to look at anything programming related, and I'm seriously wondering if I'm letting boredom get the best of me, I'm depressed, or experiencing burnout? Any suggestions for how to go about taking back this unproductive time would be greatly appreciated.

    Read the article

  • Website directory structure regarding subdomains, www, and "global" content

    - by Pawnguy7
    I am trying to make a homemade HTTP server. It occurs to me, though, I never fully understood what you might call "relativity" among web pages. I have come across that www. is a subdomain, and I understand its original purpose. IT sounds like, in general, you would redirect (is that 301 or 302?) it to a... non-subdomain, sort of. As in, redirecting www.example.com to example.com. I am not entirely sure how to make this work when retrieving files for an HTTP server though. I would assume that example.com would be the root, and www manifests as a folder within it. I am unsure. There is also the question of multi-level subdomains, e.g. subdomain2.subdomain1.example.com. It seems to me they are structured "backwards", where you go from the root left in folder structure. In this situation, subdomain2 is a directory within subdomain1, which is a directory in the root. Finally, it occurs to me I might want a sort of global location. For example, maybe all subdomains still use an image as a logo. It makes more sense to me that there is one image, rather than each having a copy. In the same way, albiet more doubtfully, you might have global CSS (though that is a bit contrary to the idea of a subdomain in the first place), or a javascript that is commonly used. (more efficient than each having its copy and better for organization purposes). Finally, mabye you have a global 404 page. I think this might be the case where you have user-created subdomains (say bloggername.example.com), where example.com still has a default 404 when either a subdomain does not exist or page does not exists under a valid blogger. I am confused on what the directory structure for this should be. To summarize: Should and how it have a global files not in a subdirectory, how should www. be handled, (or how a now www or other subdomain should be handled), and the pattern for root/subdomain, as well as subdomain within subdomains (order-wise). Sorry this is multiple questions, but I feel at the root they are all related to the directory.

    Read the article

  • Chapter 3: JavaFX Primer3

    JavaFX Script blends declarative programming concepts with object orientation. This provides a highly productive, yet flexible and robust, foundation for applications. However, with this flexibility comes responsibility from the developer.

    Read the article

  • Ubuntu boot repair Dell M1530

    - by Jon Laicov
    I'm new to Ubuntu and recently tried installing it on a Dell M1530. I had Win7 x64 installed on the HDD, and would like to have dual boot option. I had trouble installing the first time and after ran the boot-repair. After running through the process, it was unable to complete. I do have a URL http://paste.ubuntu.com/7942911. Can someone help me fix this issue or direct me where to post or email? Thanks in advance.

    Read the article

  • 100 Years of Earthquakes [Wallpaper]

    - by Jason Fitzpatrick
    If loved the tornado-visualization we posted last month, this visualization of a century of earthquakes around the globe will be right up your alley. Courtesy of the same designer behind the tornado tracks, John Nelson of IDV Solutions, this visualization captures 203,186 magnitude 4 and higher earthquakes that occurred between 1898 and 2003. Hit up the link below to grab a wallpaper-size copy from Flickr. Earthquakes Since 1989 by Magnitude [via Smithsonian] How to Use an Xbox 360 Controller On Your Windows PC Download the Official How-To Geek Trivia App for Windows 8 How to Banish Duplicate Photos with VisiPic

    Read the article

  • My gnome terminal keep opening new window

    - by evan
    I actually want to change the default window position of gnome-terminal in my Ubuntu 12.04 system. After some search, I found some one else use the command gnome-terminal --geometry=120x80+50+50 to set the default position. And I actually don't know where to paste the command, so I pasted it to 'custome command' field of terminal's profile. Now when I open one terminal, it just keep opening new ones and I have no way to stop it other than ctrl+C. I even removed .gconf/gnome-termial/ folder and it didn't worked. Can someone help me?

    Read the article

  • Git, auto updating, security and tampering?

    - by acidzombie24
    I was thinking about hosting my private project on my server (i may use 'gitolite') and have a copy on my local machine as backup (git clone then automated git fetch every few minute). I want to know what happens if there is a bug gitolite or somewhere else on my server and the source code and git repository has been tampered with? Will my backup also be corrupted? will i easily be able to revert the source using the history?

    Read the article

  • After installing Ubuntu I can't boot Windows 8 anymore

    - by Gian Luca Scoccia
    I just bought a new laptop (a lenovo ideapad Z500) and it came installed with Windows 8. I wanted to have Ubuntu on it too, therefore I resized the Win8 partition from the control panel and installed Ubuntu on the free space I created. Ubuntu works perfectly, Windows does not load anymore... I tried the recommended repair with Boot-Repair but it did not fix, now I get a "Windows boot loader failed to start" on startup and then I get the GRUB screen. The partition summery created by Boot-Repair is here: http://paste.ubuntu.com/1444837/. How can I fix this? Thanks in advance for your help.

    Read the article

  • I can't autostart xfce4 power manger lubuntu 13.10

    - by user203766
    I just upgraded my 64 bit lubuntu to 13.10 on my netbook today. After the upgrade, I simply can't autostart the xfce4 power manager. I tried to add from the desktop session settings, I tried to copy the power manager.desktop file to ~/.config/autostart folder. Everything looks fine, than I logout, log back in, and the darn power manager, just won't start automatically. It only starts when I double click the icon, or if i start it from the terminal. Help me please

    Read the article

  • Microsoft Press deal of the Day 11/October/2013 - F# for C# Developers

    - by TATWORTH
    Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/10/11/microsoft-press-deal-of-the-day-11october2013---f-for.aspxToday, 11/October/2013, O'Reilly on behalf of Microsoft Press are offering 50% off F# for C# developers. Just remember to use the code MSDEAL when you check out. "Extend your C# skills to F#—and create data-rich computational and parallel software components faster and more efficiently. Focusing on F# 3.0 and Microsoft Visual Studio 2012, you’ll learn how to exploit F# features to solve both computationally-complex problems as well as everyday programming tasks"

    Read the article

  • Are there any good Java/JVM libraries for my Expression Tree architecture?

    - by Snuggy
    My team and I are developing an enterprise-level application and I have devised an architecture for it that's best described as an "Expression Tree". The basic idea is that the leaf nodes of the tree are very simple expressions (perhaps simple values or strings). Nodes closer to the trunk will get more and more complex, taking the simpler nodes as their inputs and returning more complex results for their parents. Looking at it the other way, the application performs some task, and for this it creates a root expression. The root expression divides its input into smaller units and creates child expressions, which when evaluated it can use to build it's own result. The subdividing process continues until the simplest leaf nodes. There are two very important aspects of this architecture: It must be possible to manipulate nodes of the tree after it is built. The nodes may be given new input values to work with and any change in result for that node needs to be propagated back up the tree to the root node. The application must make best use of available processors and ultimately be scalable to other computers in a grid or in the cloud. Nodes in the tree will often be updating concurrently and notifying other interested nodes in the tree when they get a new value. Unfortunately, I'm not at liberty to discuss my actual application, but to aid understanding a little bit, you might imagine a kind of spreadsheet application being implemented with a similar architecture, where changes to cells in the table are propagated all over the place to other cells that need the result. The spreadsheet could get so massive that applying multi-core multi-computer distributed system to solve it would be of benefit. I've got my prototype "Expression Engine" working nicely on a single multi-core PC but I've started to run into a few concurrency issues (as expected because I haven't been taking too much care so far) so it's now time to start thinking about migrating the Engine to a more robust library, and that leads to a number of related questions: Is there any precedent for my "Expression Tree" architecture that I could research? What programming concepts should I consider. I realise this approach has many similarities to a functional programming style, and I'm already aware of the concepts of using futures and actors. Are there any others? Are there any languages or libraries that I should study? This question is inspired by my accidental discovery of Scala and the Akka library (which has good support for Actors, Futures, Distributed workloads etc.) and I'm wondering if there is anything else I should be looking at as well?

    Read the article

  • ISO Format

    One of the most common file types used in the distribution of software over the Internet is the .ISO format; these single files contain within them an exact copy of an entire CD or DVD disc. They are... [Author: Chris Holgate - Computers and Internet - April 05, 2010]

    Read the article

  • is it possible to ssh into ubuntu server with keys and from another computer using password?

    - by Sandro Dzneladze
    I have ubuntu server at home, and I use SSH keys to log in via terminal from my laptop. Rarely, but mostly from work, I need to access this server, but I dont want to copy keys on my work laptop - Id rather just use plain password for that. So if I enable password log in from ssh config file, it will ask me password on my laptop too even though it contains keys, right? Is there a way to stop this behavior? Thanks.

    Read the article

  • Calculate pi to an accuracy of 5 decimal places?

    - by pgras
    In this message at point 18 I saw following programming question: Given that Pi can be estimated using the function 4 * (1 – 1/3 + 1/5 – 1/7 + …) with more terms giving greater accuracy, write a function that calculates Pi to an accuracy of 5 decimal places. So I know how to implement the given function and how to choose how "far" I should calculate, but how can I tell when I've reached the "accuracy of 5 decimal places" ?

    Read the article

  • Raid superblock missing on single parition. Recovery needed!

    - by user171639
    Ok so I have a 2 TB raid 1 setup that has three partitions: sdc1: linux sdc2: swap sdc3: LVM for data However the LVM will no longer mount. So I thought that I would take the first drive, mount it in linux (ive done this b4), and reset the spare drive to copy the data. Normally I can mount a single drive for data recovery using: sudo su apt-get install mdadm lvm2 mdadm --assemble --scan modprobe dm-mod vgscan vgchange -ay c mount -o ro /dev/c/c /mnt Unfortunately, vgscan doesnot recognize the data partition. It appears as though the superblock on the first drive's data partition was erased while syncing with the second. So now I cannot mount that partition and the second drive is stuck in spare mode. Any ideas? Or a way to force mount the data partition just to copy the data? knoppix@Microknoppix:~$ sudo su root@Microknoppix:/home/knoppix# apt-get install mdadm lvm2 Reading package lists... Done Building dependency tree Reading state information... Done lvm2 is already the newest version. mdadm is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 551 not upgraded. root@Microknoppix:/home/knoppix# mdadm --assemble --scan mdadm: /dev/md/1 has been started with 1 drive (out of 2). mdadm: /dev/md/0 has been started with 1 drive (out of 2). root@Microknoppix:/home/knoppix# modprobe dm-mod root@Microknoppix:/home/knoppix# vgscan Reading all physical volumes. This may take a while... No volume groups found root@Microknoppix:/home/knoppix# cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdc1[2] 4193268 blocks super 1.2 [2/1] [U_] md1 : active raid1 sdc2[2] 524276 blocks super 1.2 [2/1] [U_] unused devices: <none> root@Microknoppix:/home/knoppix# mdadm -v --assemble --auto=yes /dev/md2 /dev/sdc3 mdadm: looking for devices for /dev/md2 mdadm: no recogniseable superblock on /dev/sdc3 mdadm: /dev/sdc3 has no superblock - assembly aborted root@Microknoppix:/home/knoppix# dumpe2fs /dev/md0 | grep -i superblock dumpe2fs 1.42.4 (12-Jun-2012) Primary superblock at 0, Group descriptors at 1-1 Backup superblock at 32768, Group descriptors at 32769-32769 Backup superblock at 98304, Group descriptors at 98305-98305 Backup superblock at 163840, Group descriptors at 163841-163841 Backup superblock at 229376, Group descriptors at 229377-229377 Backup superblock at 294912, Group descriptors at 294913-294913 Backup superblock at 819200, Group descriptors at 819201-819201 Backup superblock at 884736, Group descriptors at 884737-884737 root@Microknoppix:/home/knoppix# Notes: I can read the super block from the spare drive. I was gonna try and restore the superblock from one of the backups, but i dont know how or if this would work. I also heard creating a new array (mdadm --create) using the same parameters will not delete the data on the drive but i didnt want to risk it. Recommendations?

    Read the article

  • SSIS 2008 Import and Export Wizard and Excel-based Data

    Even though the Import and Export Wizard, incorporated into the SQL Server 2008 platform, greatly simplifies the creation of SQL Server Integration Services packages, it has its limitations. This article points out the primary challenges associated with using it to copy data between SQL Server 2008 and Excel and presents methods of addressing these challenges.

    Read the article

  • SSMS Tools Pack 3.0 is out. Full SSMS 2014 support and improved features.

    - by Mladen Prajdic
    With version 3.0 the SSMS 2014 is fully supported. Since this is a new major version you'll eventually need a new license. Please check the EULA to see when. As a thank you for your patience with this release, everyone that bought the SSMS Tools Pack after April 1st, the release date of SQL Server 2014, will receive a free upgrade. You won't have to do anything for this to take effect. First thing you'll notice is that the UI has been completely changed. It's more in line with SSMS and looks less web-like. Also the core has been updated and rewritten in some places to be better suited for future features. Major improvements for this release are: Window Connection Coloring Something a lot of people have asked me over the last 2 years is if there's a way to color the tab of the window itself. I'm very glad to say that now it is. In SSMS 2012 and higher the actual query window tab is also colored at the top border with the same color as the already existing strip making it much easier to see to which server your query window is connected to even when a window is not focused. To make it even better, you can not also specify the desired color based on the database name and not just the server name. This makes is useful for production environments where you need to be careful in which database you run your queries in. Format SQL The format SQL core was rewritten so it'll be easier to improve it in future versions. New improvement is the ability to terminate SQL statements with semicolons. This is available only in SSMS 2012 and up. Execution Plan Analyzer A big request was to implement the Problems and Solutions tooltip as a window that you can copy the text from. This is now available. You can move the window around and copy text from it. It's a small improvement but better stuff will come. SQL History Current Window History has been improved with faster search and now also shows the color of the server/database it was ran against. This is very helpful if you change your connection in the same query window making it clear which server/database you ran query on. The option to Force Save the history has been added. This is a menu item that flushes the execution and tab content history save buffers to disk. SQL Snippets Added an option to generate snippet from selected SQL text on right click menu. Run script on multiple databases Configurable database groups that you can save and reuse were added. You can create groups of preselected databases to choose from for each server. This makes repetitive tasks much easier New small team licensing option A lot of requests came in for 1 computer, Unlimited VMs option so now it's here. Hope it serves you well.

    Read the article

< Previous Page | 422 423 424 425 426 427 428 429 430 431 432 433  | Next Page >