Search Results

Search found 12472 results on 499 pages for 'remote debugging'.

Page 429/499 | < Previous Page | 425 426 427 428 429 430 431 432 433 434 435 436  | Next Page >

  • Can any iSCSI NAS appliance replicate / clone a LUN to an external drive?

    - by Boden
    I would like to backup using Windows Imaging to some kind of NAS appliance. I believe this will require the NAS to support iSCSI. I would then like the appliance to support the replication of the iSCSI LUN to an external eSATA or USB disk connected directly to the appliance. I've found plenty of NAS appliances that can do iSCSI and replicate to an external drive, but none that I've found thus far can do both at once. That is, the devices can do iSCSI, but then the replication feature doesn't work. The idea here is to backup to an appliance located in a secure office far away from the server room. Offsite backups to external hard drive could be managed from the appliance. The benefits of such a setup would be: 1) very unlikely that fire or random theft would affect both server-room backup and "remote" backup appliance 2) offsite backups could be managed by multiple trusted people without granting access to server room 3) Windows imaging provides poor man's deduplication, so each backup volume can contain a decent backup history. I understand why this would be a non-trivial thing to implement, but I'm wondering if such a thing exists? Preferably a tabletop, low to medium cost device. Alternative solutions welcome. NOTE: I'm backing up very few but very large files, so file replication is not a good option.

    Read the article

  • Running KVM/XEN/Hyper-V VMs from a RAM disk, is this possible? Practical?

    - by Ausmith1
    Currently I'm using ESX (v3 and v4) to test a scripted OS (Windows 2003) and application install DVD. The DVD ISO (8GB) is mounted on a 1Gbps NFS datastore and the VMDK's (20GB) are on an SSD mounted via NFS over a 10Gbps link. It still takes a lot longer than I'd really like for to run through a test iteration and I'm wondering if mounting the virtual disks and ISO on a RAM disk on the same server as the hypervisor is running on would be worth my while. I can dedicate a server to this VM and 32GB of RAM in the system should be adequate to do the trick I'd guess. (1GB hypervisor OS, 28GB RAM disk and 2GB for the VM is < the 32GB available to me) Since hosting a RAM disk within ESX does not seem possible I'm open to trying KVM/Xen/Hyper-V. KVM would probably be my first choice of these three. Anyone out there tried this? Bear in mind this is purely for a test run of the installer, the VM will be discarded as soon as the test is completed so I'm not worried about losing data from the remote possibility of a power failure.

    Read the article

  • Slow Local Network, Windows 7, Snow Leopard, WiFi/Wired

    - by WerkkreW
    I am experiencing really poor local network performance in my home. I was recently using a Linksys WRT54G Router with DD-WRT on it, and a couple comparable Linksys-G PCI cards for connectivity but decided to upgrade hoping it would help with my performance issues. The computers in my house are connected as follows: Comcast Business Class Commercial 25mbps/10mbps (Verified) D-Link DGL-4500 Wireless N Router Windows 7x64 - D-Link DWA-552 Wireless-N Windows 7x64 - D-Link DWA-552 Wireless-N Mac Mini 10.6.2 - AirPort Extreme N Playstation 3, Hard Wired Xbox 360, Hard Wired Essentially the problem is very specific. Web browsing and uploading/downloading files from the internet is fine, more than fine. But if I want to say, Stream a video from one of my Windows 7 computers to my PS3, or copy a large video file between either of the PC's or the Mac, I get a consistent 500-900Kbps throughput at the high end. If I open my network browser, or try to browse my homegroup the response time is horrible. Both of my Windows computers are showing Strong wireless signals with a connection speed of 300Mbps. I know I can never expect to achieve anything near those speeds, but 500Kbps? Here is what I have tried so far: Enabled Single mode N-only and N/G Only on router WPA2 with AES Encrpytion Disabled "Remote Differential Compression" in Windows 7 Disabled TCP "Auto-Tuning" Used other software for file copies such as "Teracopy" I am at the end of my rope. Unfortunately I live in a 75 year old home with plaster walls, so hard-wiring my entire house isn't really an option I can handle right now. Any ideas to help me get decent speed when transferring files across my network would be greatly appreciated.

    Read the article

  • Network connection keeps dropping - bad hardware?

    - by Bill Sambrone
    Hello all, I've into a bit of a wall with a client of mine. In an office of 20 people, he is the only one who experiences broken connections to his mapped network drives. I have everyone set up with about 6 mapped drives, all pointing to the same server (no DFS), and everyone else can access them lightning fast. The environment consists of a mix of Windows 7 and XP machines, all 32-bit. The server holding the data everyone is mapping to is running on Server 2008 R2, and is a domain controller. We recently swapped out their old 10/100 switch for a shiny new Dell PowerConnect gigabit switch. We have also replaced an old dying Sonicwall with a shiny new one. Everything is running on an ESX host except for the DC, where everyone is getting data from. In my client's office, we have done the following: Swapped out his computer (Win7 and XP box) Swapped out the desktop switch in his office Removed the desktop switch in his office Changed out the network cable going to the wall Ran 'net config server /autodisconnect:-1' on the server Disabled remote differential compression on his current Win7 box When we swapped out his network cable, everything seemed fine for about 4 days. Normally I would get a phone call a couple times per day letting me know that Outlook has crashed (there is a 9GB PST living on the server he is always connected to), or that his software he is running from his L drive has crashed. I almost thought I had this solved, but after we rebooted the DC the other night he all of a sudden couldn't stay connected to his mapped network drives for more than 10 minutes. When I ran 'net use' from the command prompt, it listed all the network drives where were randomly in a state of 'OK', 'Disconnected', or 'Reconnecting'. What else should I try? Maybe there is bad wiring in the wall, patch panel, or a bad port in the new switch I have in the server room?

    Read the article

  • Laptop authentication/logon via accelometer tilt, flip, and twist

    - by wonsungi
    Looking for another application/technology: A number of years ago, I read about a novel way to authenticate and log on to a laptop. The user simply had to hold the laptop in the air and execute a simple series of tilts and flips to the laptop. By logging accelerometer data, this creates a unique signature for the user. Even if an attacker watched and repeated the exact same motions, the attacker could not replicate the user's movements closely enough. I am looking for information about this technology again, but I can't find anything. It may have been an actual feature on a laptop, or it may have just been a research project. I think I read about it in a magazine like Wired. Does anyone have more information about authentication via unique accelerometer signatures? Here are the closest articles I have been able to find: Knock-based commands for your Linux laptop Shake Well Before Use: Authentication Based on Accelerometer Data[PDF] Inferring Identity using Accelerometers in Television Remote Controls User Evaluation of Lightweight User Authentication with a Single Tri-Axis Accelerometer Identifying Users of Portable Devices from Gait Pattern with Accelerometers[PDF] 3D Signature Biometrics Using Curvature Moments[PDF] MoViSign: A novel authentication mechanism using mobile virtual signatures

    Read the article

  • What are problems and pitfalls with a public facing Active Directory

    - by Ralph Shillington
    The situation that i'm faced with is this: We plan on using a number of server applications hosted on Amazon EC2 machines, mainly Microsoft Team Foundation Server. These services rely heavily on Active Directory. Since our servers are in the Amazon cloud it should go without saying (but I will) that all our users are remote. It seems that we can't setup VPN on our EC2 instance -- so the users will have to join the domain, directly over the internet then they'll be able to authenticate and once authenticated, use that token for accessing resources such as TFS. on the DC instance, I can shut down all ports, except those needed for joining/authenicating to the domain. I can also filter the IP on that machine to just those address that we are expecting our users to be at (it's a small group) On the web based application servers, I imagine all we need to open is port 80 (or 8080 in the case of TFS) One of the problems that I'm faced with is what domain name to use for this Active directory. Should I go with "ourDomainName.com" or "OurDomainName.local" If I choose the latter, does that not mean that I'll have to get all our users to change their DNS address to point to our server, so it can resolve the domain name (I guess I could also distribute a host file) Perhaps there is another alternative that I'm completely missing.

    Read the article

  • I want to use OpenVPN to access the web and email from China. How?

    - by gaoshan88
    My question: How do I use my already existing OpenVPN setup to enable secure, remote web surfing and email checking from open wireless hotspots? Some long winded details: I am running Ubuntu and have OpenVPN up and working fine as a server. My client machine connects fine as well. However, that just gets me a secure connection to my home network. What I want is to be able to access my VPN server and surf the web or check email securely from anywhere with an open wireless connection. I am frequently in China and having secure, unblocked access would be a boon (especially since I like to work from tea houses and coffee shops and I've already had a password sniffed and hacked once). I already know how to tunnel over SSH via a SOCKS proxy using something like: ssh -ND 8887 -p 22 [email protected] but since I have OpenVPN I figure why not try it? So... what are the steps involved in making it so I can connect to my VPN and the surf and check mail to my hearts content (slowly to be sure but at least it wold be secure). Thx!

    Read the article

  • openvpn problem

    - by Jared Voronik
    I have a problem with openvpn. I have already setup openvpn sucessfully on some other servers in the past (basic configuration, nothing special). On this server, I used the same config file, but for setting up nat iptables -t nat -A POSTROUTING -s 10.4.0.0/24 -o eth0 -j MASQUERADE doesn't work. It gives error: iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. How do I fix this error? Also, if I can't fix this error, can I do bridging instead of routing? I have only 1 interface, and I can connect to remote server only via ssh (and need to avoid reboots if at all possible) so if briding means a whole ethernet card has to be devoted to the openvpn (and no other servers) then briding is out, otherwise I can use briding. Do you know of a simple, step by step guide to configure openvpn briding (just simple openvpn server and clients that can access internet through vpn server, nothing fancy)?

    Read the article

  • Problem with Outlook 2010 (SMTP AUTH LOGIN)

    - by Filipe YaBa Polido
    **IGNORE THIS QUESTION - SOLVED WITH A PYTHON SCRIPT available at: http://yabahaus.blogspot.com I have to connect one customer Outlook 2010 to a remote server on which I have either no right, neither way to talk to the sysadmin. This is the thing, after installing and reviewing the logs on Wireshark: Outlook Express: HELO machine AUTH LOGIN username base64 encoded password base64 encoded mails go through. Outlook 2010: HELO machine AUTH DIGEST-MD5 response from server Outlook sends just a * AUTH LOGIN password base64 encoded So... I can send mails in the same domain, but can't send outside, it gives me a relay denied message. My point is... Why the h**l Outlook 2010 doesn't send the username AND the password?! It can never login the right way :| With other versions of Outlook it works fine, and with OE works great, it auths and allows to send mail to a different domain. I've googled and nothing worked. I'm pretty sure that I'm not alone with this one. My last resort will be to configure a local proxy/server that relays to the original one :| Any help would be appreciated. Sorry my bad english as is not my natural language. Thanks.

    Read the article

  • Distributing processing for an application that wasn't designed with that in mind

    - by Tim
    We've got the application at work that just sits and does a whole bunch of iterative processing on some data files to perform some simulations. This is done by an "old" Win32 application that isn't multi-processor aware, so new(ish) computers and workstations are mostly sitting idle running this application. However, since it's installed by a typical Windows Install Shield installer, I can't seem to install and run multiple copies of the application. The work can be split up manually before processing, enabling the work to be distributed across multiple machines, but we still can't take advantage of multiple core CPUs. The results can be joined back together after processing to make a complete simulation. Is there a product out there that would let me "compartmentalize" an installation (or 4) so I can take advantage of a multi-core CPU? I had thought of using MS Softgrid, but I believe that still depends on a remote server to do the heavy lifting (though please correct me if I'm wrong). Furthermore, is there a way I can distribute the workload off the one machine? So an input could be split into 50 chunks, handed out to 50 machines, and worked on? All without really changing the initial application? In a perfect world, I'd get the application to take advantage of a DesktopGrid (BOINC), but like most "mission critical corporate applications", the need is there, but the money is not. Thank you in advance (and sorry if this isn't appropriate for serverfault).

    Read the article

  • ubuntu 9.04 pptp broken after a power failure

    - by kevin42
    I have a small Ubuntu 9.04 router setup as a NAT box and a PPTP server. After a power failure everything except the PPTP server still works. A windows client gets to "registering your computer on the network" but then says Error 742: The remote computer does not support the required data encryption type. I did some research and I think the problem is with the ppp_mppe module. When I try to run 'modprobe ppp_mppe' it hangs indefinitely. What would cause this hang? Any ideas how I can troubleshoot this further? Thanks for the help! UPDATE: I am still having the problem, however I have found some more information. When the first user tries to connect to pptp, the process list shows modprobe sha1 running, and one instance of modprobe ppp_mppe for each connection attempt. If I killall modprobe at this point the next connection attempt works, and everything is fine until the next reboot. I'm planning to do a clean install at some point in the future but I'd really like to get to the real cause of this.

    Read the article

  • "one-off" use of http_proxy in a Chef remote_file resource

    - by user169200
    I have a use case where most of my remote_file resources and yum resources download files directly from an internal server. However, there is a need to download one or two files with remote_file that is outside our firewall and which must go through a HTTP proxy. If I set the http_proxy setting in /etc/chef/client.rb, it adversely affects the recipe's ability to download yum and other files from internal resources. Is there a way to have a remote_file resource download a remote URL through a proxy without setting the http_proxy value in /etc/chef/client.rb? In my sample code, below, I'm downloading a redmine bundle from rubyforge.org, which requires my servers to go through a corporate proxy. I came up with a ruby_block before and after the remote_file resource that sets the http_proxy and "unsets" it. I'm looking for a cleaner way to do this. ruby_block "setenv-http_proxy" do block do Chef::Config.http_proxy = node['redmine']['http_proxy'] ENV['http_proxy'] = node['redmine']['http_proxy'] ENV['HTTP_PROXY'] = node['redmine']['http_proxy'] end action node['redmine']['rubyforge_use_proxy'] ? :create : :nothing notifies :create_if_missing, "remote_file[redmine-bundle.zip]", :immediately end remote_file "redmine-bundle.zip" do path "#{Dir.tmpdir}/redmine-#{attrs['version']}-bundle.zip" source attrs['download_url'] mode "0644" action :create_if_missing notifies :decompress, "zipp[redmine-bundle.zip]", :immediately notifies :create, "ruby_block[unsetenv-http_proxy]", :immediately end ruby_block "unsetenv-http_proxy" do block do Chef::Config.http_proxy = nil ENV['http_proxy'] = nil ENV['HTTP_PROXY'] = nil end action node['redmine']['rubyforge_use_proxy'] ? :create : :nothing end

    Read the article

  • Web browsing through SSH tunnel gets stuck/clogged

    - by endolith
    I use tools like Tunnelier to log into my home Tomato router through SSH, and then use it as a proxy for web browsing, tunnel for Remote Desktop/VNC, etc. Most days it works great, but some days every page I try to view gets stuck, like the tunnel is clogged. I load a web page and it seems to be loading, then stops, with the little loading icon spinning and nothing happening. I refresh the page, I reboot the router, I reboot the other computers on my home network and turn off any bandwidth-hogging services on them, I've turned on QoS on the router to prioritize SSH. I don't understand what's getting stuck. Rebooting or disconnecting/reconnecting the SSH tunnel improves responsiveness for a minute, but then it gets clogged again. It also seems to help if I don't do anything on the tunnel for a few minutes, then it will be responsive for a bit and then get clogged again. Trying to open a terminal console from Tunnelier is also unresponsive, so it's not just a web browsing problem. Likewise, connecting to http://192.168.1.1 in the browser (to the router's web config through its own tunnel) is also slow/laggy/halting. The realtime bandwidth reported by the router is nowhere near my DSL connection's limits, though it does show big spikes during the laggy times, and the connection is responsive when it shows low bandwidths. How do I troubleshoot something like this?

    Read the article

  • Looking for suggestions for hosting Windows 2000 Server in the cloud / VPS / etc?

    - by JohnyD
    I have a Windows 2000 Server, currently virtualized in Hyper-V, that I would like to get running off-site as a backup (cloud, VPS, etc). You can't virtualize in EC2 and I'm fairly certain there are no Server 2000 AMI's floating about (correct me if I'm wrong!). If anyone has a recommendation on how I can get a virtualized Windows 2000 Server running in a secure, remote environment I would be grateful. As far as locations go I'd be interested in both North America as well as Australia and Europe. In a nutshell, we're ploughing our way out of a legacy codebase and this server is the last that remains of the legacy apps. However, it is still very much used by our clients. Everything is backed up each night (data, images, etc) to tape which is then taken offsite. However, in the event of a fire I would love to have a backup legacy server to point DNS records to. So while I am rebuilding from the ashes our services would already be available. It would save a lot of time and make my managers all the more happy (and that's what it's all about, riighhtt? :D) Thank you all for your suggestions. Please let me know if I've left out any important information. Additional info: - the legacy codebase does not function properly in Server 2003

    Read the article

  • Windows desktop virutalization instead of replacing work stations

    - by Chris Marisic
    I'm head of the IT department at the small business I work for, however I am primarily a software architect and all of my system administration experience and knowledge is ancillary to software development. At some point this year or next we will be looking at upgrading our workstation environment to a uniform Windows 7 / Office 2010 environment as opposed to the hodge podge collection of various OEM licensed editions of software that are on each different machine. It occurred to me that it is probably possible to forgo upgrading each workstation and instead have it be a dumb terminal to access a virutalization server and have their entire virtual workstation hosted on the server. Now I know basically anything is possible but is this a feasible solution for a small business (25-50 work stations)? Assuming that this is feasible, what type of rough guidelines exist for calculating the required server resources needed for this. How exactly do solutions handle a user accessing their VM, do they log on normally to their physical workstation and then use remote desktop to access their VM, or is it usually done with a client piece of software to negotiate this? What types of software available for administering and monitoring these VM's, can this functionality be achieved out of box with Microsoft Server 2008? I'm mostly interested in these questions relating to Server 2008 with Hyper-V but fell free to offer insight with VMware's product line up, especially if there's any compelling reasons to choose them over Hyper-V in a Microsoft shop. Edit: Just to add some more information on implementation goals would be to upgrade our platform from a Win2k3 / XP environment to a full Windows 2008 / Win7 platform without having to perform any of that associated work with our each differently configured workstation. Also could anyone offer any realistic guidelines for how big of hardware is needed to support 25-50 workstations virtually? The majority the workstations do nothing except Office, Outlook and web. The only high demand workstations are the development workstations which would keep everything local.

    Read the article

  • Windows 7 comments field missing when browsing network

    - by Toymangenie
    I have just purchased three Windows 7 Professional Dell 64-bit PCs for testing prior to upgrading our company’s 120+ PCs from Windows XP Professional. The setup is a standard domain with a Windows Server 2003 32-bit server. We name each PC XP1 to XP150 so that when users join or leave, I don’t have to rename the PC. We use the Description field to allocate the user’s name to each PC. We also have a share set up on each PC using the user’s name. When I browse the network using Windows Explorer in XP, I get a useful display. The left pane showing the PC number and the right pane showing NAME and COMMENTS So, for example I would see: XP01 Fred Bloggs (Each PC on a new row.) The right pane is my main tool for administering the network. I can easily see the PC number and the name of the user. However, in Windows 7, this seems to have been thrown out of the window and replaced with fields that I do not need and in my case always display the same info. "Name", "Category", "Workgroup", "Network Location" In my case the Name column gives the PC number (XP10) etc and all three other columns display identical useless information. So I can’t see who is using XP10. When I am in “help desk” mode, I would naturally ask the user’s name and use my remote desktop client to view their screen. The user isn’t aware of their PC name, so I am finding it impossible to match the user name with a PC number. Any ideas how to overcome this "by design" change to Windows 7?

    Read the article

  • cannot connect to vpn server (error 721)

    - by callmeblessed
    Hi I got 2 internet connections in my computer. One is using 3.5G HSDPA modem (vodafone huawei e220) and the other using mobile phone (cdma zte c261). Both are using different ISP and i have both. at the moment, i can connect to my office vpn using the HSDPA modem one. But when i tried to use cdma modem (dial up - mobile phone modem), i am just able to get "verifying username and password" and then after a few minutes it display error : Error 721 The Remote Computer didn't respond. I tried to ping into my office ip address, it got good result but still cannot connect to the vpn. I tried to turn off all my firewall (i'm using commodo) and has no response as well. In my cdma mobile phone modem Network connections I tried to allow iNternet connection sharing as well ... and turn on all Internet Protocol TCP/IP, File & Printer Sharing & Client for microsoft networks. But all of my effort has no effect. How to fix this problem ? note: my office using windows vpn as well. thank you .

    Read the article

  • Internet Problem: Wireless connected but no connection to internet

    - by Josh K
    Hey i have a interesting network setup on a laptop here and for some reason the internet isnt working. I am connected to a secure network via wireless router and taskbar says i am connected and with good signal strength but in my internet browser i cant connect to any websites, the error is: This webpage is not available. (Chrome) I am using Chrome, but websites dont work on IE either. Heres a little background on the setup i have. I have a Ethernet connected to the laptop with a static ip, and then i have the wireless setup with DHCP enabled. I am using the ethernet to connect to the network (for remote desktop) but the wireless for internet (to avoid the network firewalls). this set up has worked fine for a few months, but i cant figure out what is going on now. Might be worth it to note it is a Lenovo Thinkpad and i just uninstalled ThinkVantage Access Connections (as it was giving me ample problems prior to this one, which i consider a step up) Tried repairing connection as well, let me know if you guys have any ideas please! EDIT: Solved-Dead Modem in the server room.... Sorry guys didn't have access to that myself

    Read the article

  • What kind of server attacks should i be aware of nowadays

    - by Saif Bechan
    I am recently running a web server, and there is a lot of information online, but it can all be a little confusing. I recently opened my logwatch logs and saw that i get attacked a lot by all sorts of bots. Now I am interested in a list with things I definitely should be aware of nowadays, and possible ways to prevent them. I have read stories about server crashed by floods, crashed by email, and all sorts of crazy stuff. Thing I already did: I have recently blocked all my ports, except for the http and email ports. I disabled IPv6, this was giving me a lot of named errors I have turned on spam DNS blackhole lists to fight spam - sbl.spamhaus.org; - zen.spamhaus.org; - b.barracudacentral.org; I installed and configured mod_security2 on apache There is no remote access possible to my databases That is all i did so far, further I am not aware of any other threats. I want to know if the following things have to be protects. Can I be flooded by emails. How can i prevent this Can there be a break in or flood of my databses Are there things like http floods or whatever Are there any other things i should know before i go public with my server I also want to know if there is some kind of checklist with must-have security protections. I know the OWASP list for writing good web applications, is there something for configuring a server.

    Read the article

  • Client unable to access OWA website after temporarily changing SSL certificate on the server

    - by Lorenz Meyer
    I have the following issue: One client computer (Windows XP) cannot access the OWA website. All other client computers can (Except another one in the same remote office). How this happened: I temporarily changed the SSL certificate on the Exchange Server yesterday. After a few minutes, I reverted back, an now the same certificate that was installed for years is back again. During these few minutes, they were in OWA on this computer and got a certificate error. What exactly happens: Internet Explorer displays the error Internet Explorer cannot display the webpage, Firefox displays The connection was reset and Crome shows This webpage is not available. The connection to ... was interrupted. What I already did to try to get this working: Restart the client computer Restart the exchange server Deleted Internet Explorer browsing history In IE, Internet Options, tab Content, under Certificates deletes SSL cache Restored Internet Explorer to the default parameters I looked into certmgr.msc, but did not find a certificate related to the issue What could I do else to narrow down the origin of this problem (or better: resolve it) ? Can you give any advice ?

    Read the article

  • Syntax error at '{'; expected '}' when using nagios in puppet

    - by jiangchengwu
    It's a big problem to me, because I'm not familiar with puppet. ERROR on the puppetmaster: debug: importing '/etc/puppet/manifests/nodes/group-1.pp' err: Could not parse for environment production: Syntax error at '{'; expected '}' at /etc/puppet/manifests/nodes/group-1.pp:6 ERROR on the puppet client: err: Could not retrieve catalog from remote server: Error 400 on SERVER: Could not parse for environment production: Syntax error at '{'; expected '}' at /etc/puppet/manifests/nodes/group-1.pp:6 in group-1.pp: node 'group1' { include ntp class { 'nagios::host': #this is line 6 nodename => $clientcert, appname => 'test', } } nagios::host in module module/nagios/host.pp code are here: class nagios::host($nodename, $hostgroup) { file { '/usr/lib/nagios/plugins': mode = "755", require = Package["nagios-plugins"], } ... @@nagios_service { "${nodename}_check_ssh": ensure => present, use => 'generic-service', host_name => "${nodename}", notification_interval => 60, flap_detection_enabled => 0, service_description => "SSH", check_command => "check_ssh", target => "/etc/nagios3/services.d/${nodename}.cfg", } } and the file module/nagios/init.pp is blank How could I fix it ?

    Read the article

  • Timely automatic unexpected reboot on ubuntu desktop

    - by ahmad
    We have a remote linux server (ubuntu desktop). The system log indicates the system has been restarted on the timely fashion. Here is a part of the last output: ut pts/0 192.169.50.2-sta Sat Nov 24 22:17 still logged in reboot system boot 2.6.32-21-generi Sat Nov 24 22:04 - 22:17 (00:13) ut pts/0 server.local Sat Nov 24 21:36 - crash (00:27) reboot system boot 2.6.32-21-generi Sat Nov 24 15:55 - 22:17 (06:21) reboot system boot 2.6.32-21-generi Fri Nov 23 18:02 - 22:17 (1+04:14) reboot system boot 2.6.32-21-generi Fri Nov 23 10:39 - 22:17 (1+11:38) reboot system boot 2.6.32-21-generi Fri Nov 23 04:18 - 22:17 (1+17:59) reboot system boot 2.6.32-21-generi Fri Nov 23 03:57 - 22:17 (1+18:20) reboot system boot 2.6.32-21-generi Thu Nov 22 20:38 - 22:17 (2+01:38) reboot system boot 2.6.32-21-generi Thu Nov 22 11:13 - 22:17 (2+11:03) reboot system boot 2.6.32-21-generi Thu Nov 22 08:12 - 22:17 (2+14:05) reboot system boot 2.6.32-21-generi Wed Nov 21 11:16 - 22:17 (3+11:00) reboot system boot 2.6.32-21-generi Tue Nov 20 22:36 - 22:17 (3+23:41) reboot system boot 2.6.32-21-generi Tue Nov 20 14:12 - 22:17 (4+08:05) reboot system boot 2.6.32-21-generi Tue Nov 20 11:32 - 22:17 (4+10:44) reboot system boot 2.6.32-21-generi Tue Nov 20 01:52 - 22:17 (4+20:25) reboot system boot 2.6.32-21-generi Tue Nov 20 00:22 - 22:17 (4+21:55) reboot system boot 2.6.32-21-generi Mon Nov 19 17:27 - 22:17 (5+04:50) It looks the system is set to be restarted at 22:17. Can anyone guide me why this happens? Thanks in advance.

    Read the article

  • best practices for setting up a new windows 2008 R2 server with ec2 AWS

    - by Alex
    Can someone comment what they would add to the following list of SOP in terms of best practices? This is being set up on AWS, and then after further testing, back in our datacenter. Standard Operation Procedure (SOP): Installation Part: 2 - Installation of Software Components in Windows 2008 R2 (Updated). Step: 1 Logon to the host through Remote Desktop. Strp: 2 Open Server Manager - Server Roles - Install Web Server IIS 7.5 with compatible of IIS 6 features and Management compatibility mode. Step: 3 Open IE/Mozilla to Download the below listed software's and save all installation files to folder called "AWS Server Install Files" for future reference.. Net Framework 2.0 (Download that from internet) Crystal reports for .Net Framework 2.0 (x64) (Download that from internet) SQL Server 2005 (AWS Image) Step: 4 Once all software's saved on local drive, then Install it one by one. Step: 5 Navigate to Desktop folder to install the below listed softwares. Microsoft Asp.net 2.0 AjaxExtention 1.0 (placed on Desktop \Softwares) WebEx recorder. (placed on Desktop \Softwares) Winrar(placed on Desktop \Softwares) Step: 6 Make sure all the software are working fine. Step: 7 Inspect the server once entirely. Step: 8 Logoff & Stop the Instance.

    Read the article

  • Mysql connections hanging in login state

    - by Mark Rose
    Suddenly today, I had an issue with connections to mysql hanging when connecting by IP address (e.g. mysql -h 10.1.248.20), but I could still connection using localhost fine, regardless the user. mysql> show processlist; +----+----------------------+------------------+------+---------+------+-----------------------------------------------------------------------+------------------+ | Id | User | Host | db | Command | Time | State | Info | +----+----------------------+------------------+------+---------+------+-----------------------------------------------------------------------+------------------+ | 1 | system user | | NULL | Connect | 10 | Connecting to master | NULL | | 2 | system user | | NULL | Connect | 10 | Has read all relay log; waiting for the slave I/O thread to update it | NULL | | 37 | unauthenticated user | 10.1.248.3:36694 | NULL | Connect | NULL | login | NULL | | 38 | unauthenticated user | 10.1.248.3:36695 | NULL | Connect | NULL | login | NULL | | 39 | unauthenticated user | 10.1.248.3:36696 | NULL | Connect | NULL | login | NULL | | 40 | root | localhost | NULL | Query | 0 | NULL | show processlist | +----+----------------------+------------------+------+---------+------+-----------------------------------------------------------------------+------------------+ 6 rows in set (0.00 sec) Yes, I realize replication was broken in that output above; that was after I tried restart MySQL (it was an emergency). And as suddenly as things stopped working, they started working again. DNS was working fine at the time. Replication was still working. MySQL was responsive. Does anyone have any idea what would cause MySQL logins from remote IPs to hang suddenly?

    Read the article

  • Internal Code Signing: Key Distribution, or Certificate Server?

    - by Myrddin Emrys
    I should first note that we have nobody in IT with significant familiarity with self-signed certification. We have a moderately sprawling network (one forest, many locations), and we are now rolling out internal code signing; until now users have run untrusted code, or we even disabled(!) the warnings. Intranet applications, scripts, and sites will now be signed with self certification. I am aware of two obvious ways we can deploy this: Distributing the keys directly via a group policy, and setting up a cert server. Can someone explain the trade-offs between these two methods? How many certs before the group policy method is unwieldy? Are they large enough that remote users will have issues? Does the group policy method distribute duplicates on every login? Is there a better method I am not aware of? I can find a lot of documentation on certifications and various ways to create them, but I have not been able to find something that summarizes the difference between the distribution methods and what criteria make one or the other superior.

    Read the article

< Previous Page | 425 426 427 428 429 430 431 432 433 434 435 436  | Next Page >