Search Results

Search found 22600 results on 904 pages for 'remote connection'.

Page 433/904 | < Previous Page | 429 430 431 432 433 434 435 436 437 438 439 440  | Next Page >

• My Linux desktop sees my HDMI-connected monitor, but my monitor says "No signal"

  - by hrunting

  I have a Gigabyte H55M-UD2H motherboard and an Acer S271HL monitor. When I connect the monitor to the motherboard via VGA, signal works perfectly. When I connect the monitor via HDMI, the system "sees" the connection, but the monitor receives no signal (the monitor shows a blue box which reads "No Signal" and then the monitor goes into power-saving state). Some fun facts about this: if I hook a different monitor to this box via HDMI, the monitor receives the output without issue (same computer/motherboard, same cable, different monitor) if I connect a different computer to the monitor via HDMI, the monitor receives the output without issue (different computer, same cable, same monitor) no signal is received whether in the OS or in the BIOS there are no BIOS options for controlling video output other than for selection of onboard vs. PCI/PCI-E-based video card (the system has no dedicated video card installed) The box is running Linux, so I have the output of xrandr which shows the connection and the monitor modes detected via DDC: ~$ xrandr --prop Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on DP1 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on HDMI2 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 598mm x 336mm EDID: 00ffffffffffff000472ca028d128022 1c160103803c2278ca7b45a4554aa227 0b5054bfef80714f8140818081c08100 9500b300d1c0023a801871382d40582c 450056502100001e000000fd00384c1f 5311000a202020202020000000fc0053 323731484c0a202020202020000000ff 004c55573044303130383531300a01e5 020324f14f0102030405060790111213 1415161f230907078301000067030c00 1000382d023a801871382d40582c4500 56502100001f011d8018711c1620582c 250056502100009f011d007251d01e20 6e28550056502100001e8c0ad08a20e0 2d10103e960056502100001800000000 000000000000000000000000000000de Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on 1920x1080 60.0*+ 50.0 25.0 30.0 1680x1050 59.9 1680x945 60.0 1400x1050 74.9 59.9 1600x900 60.0 1280x1024 75.0 60.0 1440x900 75.0 59.9 1280x960 60.0 1366x768 60.0 1360x768 60.0 1280x800 74.9 59.9 1152x864 75.0 1280x768 74.9 60.0 1280x720 50.0 60.0 1440x576 25.0 1024x768 75.1 70.1 60.0 1440x480 30.0 1024x576 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 720x576 50.0 848x480 60.0 720x480 59.9 640x480 72.8 75.0 66.7 60.0 59.9 720x400 70.1 HDMI3 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on DP2 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on DP3 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on How do I get this monitor to recognize the output from this HDMI socket?

  Read the article

• Windows 7 - easiest way to tell whether AERO / DWM is enabled?

  - by Horst Walter

  From this article I have learnt, that DWM is enabled only with AERO: Let’s recall: without Aero turned on, the DWM is deactivated, so there’s also no more 2D acceleration, either (this applies equally to Windows 7 as it does to Vista) What is the easiest way to tell whether AERO / DWM on Win 7 is enabled / disabled? With some themes it is (visually) obvious, but with some others not (especially not when using remote access like VNC). Is there some dialog where I can see that AERO / DWM is enabled / disabled?

  Read the article

• Mysql, SSL and java client problem

  - by CarlosH

  I'm trying to connect to an SSL-enabled mysql server from my own java application. After setting up ssl on mysqld, and successfuly tested an account using "REQUIRE ISSUER and SUBJECT", I wanted to use that account in a java app. I've generated a private key (to a file called keystore.jks) and csr using keytool, and signed the csr using my own CA(The same used with mysqld and its certificate). Once signed the csr, I've imported the CA and client cert into the keystore.jks file. When running the application the SSL connection can't be established. Relevant logs: ... [Raw read]: length = 5 0000: 16 00 00 02 FF ..... main, handling exception: javax.net.ssl.SSLException: Unsupported record version Unknown-0.0 main, SEND TLSv1 ALERT: fatal, description = unexpected_message Padded plaintext before ENCRYPTION: len = 32 0000: 02 0A BE 0F AD 64 0E 9A 32 3B FE 76 EF 40 A4 C9 .....d..2;.v.@.. 0010: B4 A7 F3 25 E7 E5 09 09 09 09 09 09 09 09 09 09 ...%............ main, WRITE: TLSv1 Alert, length = 32 [Raw write]: length = 37 0000: 15 03 01 00 20 AB 41 9E 37 F4 B8 44 A7 FD 91 B1 .... .A.7..D.... 0010: 75 5A 42 C6 70 BF D4 DC EC 83 01 0C CF 64 C7 36 uZB.p........d.6 0020: 2F 69 EC D2 7F /i... main, called closeSocket() main, called close() main, called closeInternal(true) main, called close() main, called closeInternal(true) connection error com.mysql.jdbc.exceptions.jdbc4.CommunicationsException: Communications link failure Any idea why is this happening?

  Read the article

• Problem installing Exchange Server [closed]

  - by Carlos

  I can't connect to the instance of exchange server 2010 through EMC on the local machine running w2k8 r2. I've checked all the default website bindings, the kerberos auth and WSMan are set to native type in powershell and I still get this error message. Connecting to remote server failed with the following error message: The WS-Management service does not support the request. It was running the command 'Discover-ExchangeServer -UseWIA $true -suppresserror $true'

  Read the article

• How can I play my MP3 files through my stereo system?

  - by Joel Coehoorn

  Here's the situation. Like many others I have my entire CD collection ripped to my PC, along side other music I've acquired through iTunes or Amazon MP3. Also like many others the speakers at my PC are underpowered, and likely included in my monitor as an afterthought. This is fine for most use: system sounds, YouTube, etc. Even games sounds and music. But I'd like something a little better for when I really want to listen to music. And I have it; in the next room — barely 25 feet away as the crow flies — sits a nice 400 watts stereo system. The stereo supports MP3 CDs, so up to this point I've just kept a few CD-RW disks around to keep most of my collection available. But it's time to move on to something a little more sophisticated. What are my options for using the MP3 files available on my computer as an input for this stereo? Some notes: I want to be able to control what song the stereo is playing without having to go to the PC, including setting up and retrieving playlists. Ideally this should even be able to wake the PC from sleep mode to start playing. I primarily use Windows Media Player on the PC (which runs Windows Vista). However, the files themselves live on a server running Windows Server 2008, and so I could also install something on the server and run everything from there. The axillary input on the stereo is unfortunately limited to a 1/8 inch stereo mini-plug. I'm loath to run wires across two rooms, and I'm considering moving the stereo to the garage at some point. Therefore a wireless solution that can easily cover about 100 ft or so is preferred. I already have a Wi-Fi network ready, but it's secured so anything using Wi-Fi should make it easy to set up security. Bonus points for doing it in under $85 shipped at Amazon (I'm hoping to pay for this via $85 worth of Amazon gift cards). I know this a pretty tight budget, so just getting close is okay. Bonus points for something that remembers multiple profiles (keep my favorite songs separate from the wife's). Bonus points for a remote that can also replace my stereo remote, so I only need one device to control everything. I'm not holding my breath on this one given my price range, though. Bonus points if I can also use for Internet radio. Doing some research on my own as well. This looks like it'll do exactly what I want, but it lists at an outrageous $299: http://www.linksysbycisco.com/US/en/products/DMP100

  Read the article

• find command in Linux

  - by Martin

  My goal is to find all pdf files on a remote machine, so I resort to the useful command find. So I type find ~ *.pdf or find ~ "*.pdf" and I get nothing. I do the same on my machine and I get nothing. I do a regular search from the menu on my machine and I find quite a few pdf files. Would somebody please tell me what am I doing wrong?

  Read the article

• using ftp or webdav?

  - by ajsie

  if i want to mount remote folders in my mac and use them as a local one, should i use webdav over ftp? basically, i have read that webdav is better than ftp (old protocol). does this mean that i should never use ftp and only webdav?

  Read the article

• Is sshfs+encfs stable ?

  - by dugres

  What is your experience in using ENCFS with SSHFS for remote backup ? My main wondering is about long term stability.

  Read the article

• litespeed issue with content-type

  - by sandeep.s85

  I am running magento with litespeed. The problem I am facing is that ajax call is being made of which header is set as x-json, but lightspeed is setting another header of text/html content type I've checked that page with apache and everything is working fine. I checked the response headers with apache and litespeed and here are they: With apache: HTTP/1.1 200 OK Date: Fri, 07 Sep 2012 05:58:47 GMT Server: Apache Expires: Thu, 19 Nov 1981 08:52:00 GMT Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0 Pragma: no-cache Set-Cookie: frontend=164b21c64808a05e806027bdbd4d745d; expires=Fri, 07-Sep-2012 06:58:48 GMT; path=/; domain=mydomain.com; httponly Connection: close Transfer-Encoding: chunked Content-Type: application/x-json With litespeed: HTTP/1.1 200 OK Date: Fri, 07 Sep 2012 06:10:55 GMT Server: LiteSpeed Connection: close Expires: Thu, 19 Nov 1981 08:52:00 GMT Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0 Pragma: no-cache Set-Cookie: frontend=164b21c64808a05e806027bdbd4d745d; expires=Fri, 07-Sep-2012 07:10:55 GMT; path=/; domain=mydomain.com; httponly Content-Type: text/html; charset=UTF-8 Content-Length: 474 Vary: User-Agent I've also added application/json to mime.properties of litespeed,restarted it but that did not work. Here is the screenshot

  Read the article

• openvpn& iptables -- portforwarding and gateway

  - by Smith.Lai

  The problem is similar to this scenario: iptables rule still take effect after deleted Scenario: There are several clients(C1~C10) providing some services, such as SSH,HTTP..... The clients are actually a personal computer behind NAT. Their IP might be 192.168.0.x For easily access these machines through internet, I built a OpenVPN server(S1). All the C1~C10 connect to S1 with VPN address 10.8.0.x If A user(U1) wanna access C1 SSH through internet, he can connect to S1 with port "55555", and S1 port forward 55555 to 10.8.0.6:22 echo 1 /proc/sys/net/ipv4/ip_forward iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 55555 -j DNAT --to-destination 10.8.0.6:22 It works well until I mark the following in the openvpn server.conf: I marked this because I think this will make all connection go through S1 ;push "redirect-gateway" |-------(NAT)--------| (C1)--| (INTERNET)----(U1) |-----(VPN)----(S1)--| The C1~C10 have their own path to access internet resource through NAT . The server loading would be heavy if all C1~C10 connection go through S1 (for example, C1 is sending data to C2, or C1 is downloading data from a FTP site). Is there a way to solve this quandary?

  Read the article

• One SSL certificate (one domain) for two servers ?

  - by marioosh.net

  I have two servers. On SERVER1 i have configured SSL certificate (on Apache) for domain https://somedomain.com. I need to connect to my working domain some app that exists on remote server SERVER2 - working app for example: https://remoteapps.com/remoteApp. I used mod_proxy to do it, but SSL certificate doesn't work. ProxyPass /remoteApp https://remoteapps.com/remoteApp ProxyPassReverse /remoteApp https://myapp.com/remoteApp How to make certificate for https://somedomain.com/remoteApp work too ?

  Read the article

• Why does copying an XML file from Windows Server 2008 R2 64-bit to Windows XP 32-bit change the file?

  - by Alex In Paris

  What I do: Copy an xml file (ctrl+C) on a Win Server 2008 machine. Minimize mstsc.exe (remote connection app). Paste the xml file on to my WinXP machine (ctrl+V). The result: All of the original contents are still present but another bit is appended at the end of it. E.g. the proper end of the file looks something like this: <ApplicationName>MyApp</ApplicationName> </ReceivePort> </ReceivePortCollection> <PartyCollection xsi:nil="true" /> </BindingInfo> But, after the copy, it looks like this: <ApplicationName>MyApp</ApplicationName> </ReceivePort> </ReceivePortCollection> <PartyCollection xsi:nil="true" /> </BindingInfo>al, PublicKeyToken=3zzf3xxxadyyy35" Type="1" TrackingOption="ServiceStartEnd MessageSendReceive PipelineEvents" Description="" /> <ReceivePipelineData xsi:nil="true" /> <SendPipeline xsi:nil="true" /> <SendPipelineData xsi:nil="true" /> <Enable>true</Enable> <ReceiveHandler Name="WCF_OracleDB_Rx" HostTrusted="false"> <TransportType Name="WCF OracleDB" Capabilities="779" Configuratio The extra bits it adds are things that come from earlier in the XML file. If I do the copy multiple times, the extra bits are always exactly the same but another XML file will add different lines. Extra information: If I copy/paste the file, as above, but first enclose it into a zip file I do not have the same problem. I.e. the file copies properly and without any extra surprises. If I do a copy/paste from a Windows Explorer window that's opened to the folder on the remote machine, I do not have the same behavior. I.e. the file copies properly and without any extra surprises. Question: Why does this happen?

  Read the article

• How can I forward all web traffic from my Cisco ASA 5100 to a checkpoint firewall?

  - by Scott Clements

  Hi, I currently have two Cisco ASA 5100 routers setup with a site-to-site VPN at different physical locations. They are successfully configured so that all traffic at our remote site is forwarded over this VPN tunnel to our router here, which is fine, however I need the web traffic that comes here to then be forwarded onto our Check Point firewall router. Can someone please tell me how I can configure this?? Many Thanks, Scott

  Read the article

• Forefront UAG vs. Server 2012 Direct Access

  - by Matt Bear

  So I'm working on bringing my company into the 21'st century, with virtual servers, active directory, ADFS, SSO etc. Its a huuuuge project, with a future goal of ISO 27001 cerification. The current question is, does the Direct Access role offered by Server 2012 perform the same role as Forefront Unified Access Gateway 2010 does? I'm sure there are many differences, but my primary concerns are Sharepoint publishing, ADFS proxy, reverse proxy, remote connection, and o365 syncronization.

  Read the article

• What the hell was THAT?!?

  - by Massimo

  My system is Windows XP SP3, updated with the latest patches. The PC is connected to a Cisco 877 ADSL router, which does NAT from the internal network to its single static public IP address. There are no forwarded ports, and the router's management console can only be accessed from the inside. I was doing two things: working on a remote office machine via VPN and browsing some web pages on the Cisco web site. The remote network is absolutely safe (it's a lab network, four virtual servers, no publicly accessible services and no users at all; also, none of what I'm going to describe ever happened there). The Cisco web site... well, I suppose is quite safe, too. Suddenly, something happened. Strange popups appears anywhere; programs claiming they're "antimalware", "antispyware" et so on begins autoinstalling; fake Windows Update and Security Center icons pop up in the system tray. svchost.exe began crashing repeatedly. Then, finally, after some minutes of this... BSOD. And, upon rebooting, BSOD again. Even in safe mode. Ok, that was obviously some virus/trojan/whatever. I had to install a new copy of Windows on another partition to clean things up. I found strange executables, services and DLLs almost anywhere. Amongst the other things, user32.dll and ndis.sys had been replaced. A fake software called "Antimalware Doctor" had been installed. There were services with completely random names or even GUIDs (!), and also ones called "IpSect" and "Darkness". There were executable files without an .exe extension. There were even two boot-class drivers, which I'm quite sure are the ones that finally caused the system to crash. A true massacre. Ok, now the questions: What the hell was that?!? It was something more than a simple virus! How did it manage to attack my computer, as I am behind a firewall and was not doing anything even only potentially harmful on the web at the time?

  Read the article

• RDC and black screen mystery

  - by Vidar

  The following are all Windows 7 64 bit Business edition computers. I have a PC (lets call it "PC1") that I remotely access now and again using Remote Desktop Connection (RDC) on my laptop downstairs. Sometimes when I physically go back to sit at PC1, the screen is black and there is no way for me to wake it into life, no login screen or anything - the PC is still on and I am always forced to do a hard reboot. What can I do to stop this happening, it's really annoying.

  Read the article

• Clone web browser instance

  - by Sam Saffron

  Is there a tool/service that would allow 2 developers to browse the web on separate machines and have dev 1 control dev 2s session and the opposite, without the need for a hardcore remote access like terminal services. Im thinking etherpad for web browsing

  Read the article

• Windows Server 2008 R2 RAS VPN: access server on internal interface ip

  - by Mathias

  short question: I'm usually a linux admin but need to setup a Win2k8 R2 server for a student project. The server is running as VM on a root server and has a public internet IP assigned. Additionally I need a VPN server to access some services running on the server. I managed to set up a working VPN gateway via the Routing and RAS service which assigns clients an IP in the private subnet 192.168.88.0/24 with the Interface "Internal" listening on 192.168.88.1. Additionally I set up the external interface as NAT interface. So I can connect to the VPN server, get an IP assigned and the server additionally does NAT and I can access the internet over the VPN connection. The only thing I additionally need, is that I can access the server itself over that internal IP (e.g. client 192.168.88.2, server 192.168.88.1) as I want to access some services which I don't like to expose to the internet and restrict them to connected VPN clients. Does anybody have a hint, which configuration I'm missing here to be able to access the server over the VPN connection? EDIT: VPN clients get assigned the IP from the private subnet with subnetmask 255.255.255.255, I guess that might be the reason I can't access the server on the private IP address although it's in the same network range. Any ideas how to change this? I defined a static address pool in the Routing and RAS service, but I can't change the netmask there. EDIT2: I can't access the server from the client, but I can fully access the client from the server (ping, HTTP). I guess it has to do with firewall configuration. Thanks in advance, Mathias

  Read the article

• Nginx Slower than Apache??

  - by ichilton

  Hi, I've just setup 2x identical Rackspace Cloud instances and am doing some comparisons and benchmarks to compare Apache and Nginx. I'm testing with a 3.4k png file and initially 512MB server instances but have now moved to 1024MB server instances. I'm very surprised to see that whatever I try, Apache seems to consistently outperform Nginx....what am I doing wrong? Nginx: Server Software: nginx/0.8.54 Server Port: 80 Document Length: 3400 bytes Concurrency Level: 100 Time taken for tests: 2.320 seconds Complete requests: 1000 Failed requests: 0 Write errors: 0 Total transferred: 3612000 bytes HTML transferred: 3400000 bytes Requests per second: 431.01 [#/sec] (mean) Time per request: 232.014 [ms] (mean) Time per request: 2.320 [ms] (mean, across all concurrent requests) Transfer rate: 1520.31 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 0 11 15.7 3 120 Processing: 1 35 76.9 20 1674 Waiting: 1 31 73.0 19 1674 Total: 1 46 79.1 21 1693 Percentage of the requests served within a certain time (ms) 50% 21 66% 39 75% 40 80% 40 90% 98 95% 136 98% 269 99% 334 100% 1693 (longest request) And Apache: Server Software: Apache/2.2.16 Server Port: 80 Document Length: 3400 bytes Concurrency Level: 100 Time taken for tests: 1.346 seconds Complete requests: 1000 Failed requests: 0 Write errors: 0 Total transferred: 3647000 bytes HTML transferred: 3400000 bytes Requests per second: 742.90 [#/sec] (mean) Time per request: 134.608 [ms] (mean) Time per request: 1.346 [ms] (mean, across all concurrent requests) Transfer rate: 2645.85 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 0 1 3.7 0 27 Processing: 0 3 6.2 1 29 Waiting: 0 2 5.0 1 29 Total: 1 4 7.0 1 29 Percentage of the requests served within a certain time (ms) 50% 1 66% 1 75% 1 80% 1 90% 17 95% 19 98% 26 99% 27 100% 29 (longest request) I'm currently using worker_processes 4; and worker_connections 1024; but i've tried and benchmarked different values and see the same behaviour on all - I just can't get it to perform as well as Apache and from what i've read previously, i'm shocked about this! Can anyone give any advice? Thanks, Ian

  Read the article

• Virtual machines interconnection inside Proxmox 2.1 Cluster

  - by Anton

  We have 3 physical servers (each with 1 NIC) in different datacentres, all of them are interconnected by openvpn bridged private network (10.x.x.x). Inside this network we have fully functional 3 nodes Proxmox 2.1 cluster. So, actually question is: Is there any "proper" way to make "global" local network (172.16.x.x) for all VMs inside cluster, so even if we move VM from one node to other we could reach it by static IP regardless of it's physical location? BTW, we can't add dedicated NIC to each server. Thanks in advance. EDIT: I have tried to make a separate openvpn bridge for 172.16.x.x, now I have at each server two interfaces: SRV1: openvpnbr1 - 172.16.13.1 vmbr0 - 172.16.1.1 SRV2: openvpnbr1 - 172.16.13.2 vmbr0 - 172.16.2.1 But now there is no connection between those ifaces: SRV1: ping 172.16.13.2 From 172.16.1.1 icmp_seq=2 Destination Host Unreachable SRV2: ping 172.16.13.1 From 172.16.2.1 icmp_seq=2 Destination Host Unreachable If I shut down vmbr0 interfaces, so there is connection between servers over openvpn, but vmbr0 is used by Proxmox... Where I am wrong?

  Read the article

• Routers with decent parental monitoring / traffic logging?

  - by antiver

  I'm looking for consumer router / firmware recommendations with reasonably robust remote URL / hostname logging & reporting functionality. Most logging functionality I've seen is terrible - reporting only IP addresses, not rolling up reports or reporting any useful statistics. The logs are also often limited to merely the last few minutes/hours when handling high-traffic loads. Bonus points for providing a screenshot of the log reporting interface!

  Read the article

• problem using scp

  - by Tim

  I issued an command on a local machine scp -r download/ [email protected] Then I checked at the remote foo.xxx.xxx.xxx and found under my home directory, there is nothing. Did scp transfer something? If yes, where are they? Thanks!

  Read the article

• Difference in performance: local machine VS amazon medium instance

  - by user644745

  I see a drastic difference in performance matrix when i run it with apache benchmark (ab) in my local machine VS production hosted in amazon medium instance. Same concurrent requests (5) and same total number of requests (111) has been run against both. Amazon has better memory than my local machine. But there are 2 CPUs in my local machine vs 1 CPU in m1.medium. My internet speed is very low at the moment, I am getting Transfer rate as 25.29KBps. How can I improve the performance ? Do not know how to interpret Connect, Processing, Waiting and total in ab output. Here is Localhost: Server Hostname: localhost Server Port: 9999 Document Path: / Document Length: 7631 bytes Concurrency Level: 5 Time taken for tests: 1.424 seconds Complete requests: 111 Failed requests: 102 (Connect: 0, Receive: 0, Length: 102, Exceptions: 0) Write errors: 0 Total transferred: 860808 bytes HTML transferred: 847155 bytes Requests per second: 77.95 [#/sec] (mean) Time per request: 64.148 [ms] (mean) Time per request: 12.830 [ms] (mean, across all concurrent requests) Transfer rate: 590.30 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 0 0 0.5 0 1 Processing: 14 63 99.9 43 562 Waiting: 14 60 96.7 39 560 Total: 14 63 99.9 43 563 And this is production: Document Path: / Document Length: 7783 bytes Concurrency Level: 5 Time taken for tests: 33.883 seconds Complete requests: 111 Failed requests: 0 Write errors: 0 Total transferred: 877566 bytes HTML transferred: 863913 bytes Requests per second: 3.28 [#/sec] (mean) Time per request: 1526.258 [ms] (mean) Time per request: 305.252 [ms] (mean, across all concurrent requests) Transfer rate: 25.29 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 290 297 14.0 293 413 Processing: 897 1178 63.4 1176 1391 Waiting: 296 606 135.6 588 1171 Total: 1191 1475 66.0 1471 1684

  Read the article

• Failed to connect from slave to master with error "error connecting to master (1045)"

  - by Victor Lin

  I try to setup replication from slave to the master. CHANGE MASTER TO MASTER_HOST = 'master', MASTER_PORT = 3306, MASTER_USER = 'repl', MASTER_PASSWORD = 'xxx'; And I did grant privileges to the user on master. I can connect with mysql command from slave machine to the master mysql -h master -u repl -p mysql> show grants; GRANT RELOAD, SUPER, REPLICATION SLAVE, CREATE USER ON *.* TO 'repl'@'xxx' IDENTIFIED BY PASSWORD 'xxx' mysql> select 1; +---+ | 1 | +---+ | 1 | +---+ 1 row in set (0.04 sec) As you can see, privileges are correct, connection works fine, but however, the connection for replication to master always failed. mysql> show slave status\G *************************** 1. row *************************** Slave_IO_State: Connecting to master Master_Host: master Master_User: repl Master_Port: 3306 Connect_Retry: 60 Master_Log_File: Read_Master_Log_Pos: 4 Relay_Log_File: slave-replay-bin.000002 Relay_Log_Pos: 4 Relay_Master_Log_File: Slave_IO_Running: Connecting Slave_SQL_Running: Yes Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 0 Last_Error: Skip_Counter: 0 Exec_Master_Log_Pos: 0 Relay_Log_Space: 107 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: NULL Master_SSL_Verify_Server_Cert: No Last_IO_Errno: 1045 Last_IO_Error: error connecting to master 'repl@master:3306' - retry-time: 60 retries: 86400 Last_SQL_Errno: 0 Last_SQL_Error: Replicate_Ignore_Server_Ids: Master_Server_Id: 0 1 row in set (0.00 sec) Is this caused by different version of MySQL server? The version of master is 5.0.77, and the slave is 5.5.13. But all articles I could find tell me that it's okay to replicate from a newer slave to old master. How to solve this problem? -- Update -- I even try to upgrade the old MySQL, but still, the problem is not solved. mysql> show slave status\G *************************** 1. row *************************** Slave_IO_State: Connecting to master Master_Host: master Master_User: repl Master_Port: 3306 Connect_Retry: 60 Master_Log_File: master-bin.000007 Read_Master_Log_Pos: 107 Relay_Log_File: slave-replay-bin.000001 Relay_Log_Pos: 4 Relay_Master_Log_File: master-bin.000007 Slave_IO_Running: Connecting Slave_SQL_Running: Yes Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 0 Last_Error: Skip_Counter: 0 Exec_Master_Log_Pos: 107 Relay_Log_Space: 107 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: NULL Master_SSL_Verify_Server_Cert: No Last_IO_Errno: 1045 Last_IO_Error: error connecting to master 'repl@master' - retry-time: 60 retries: 86400 Last_SQL_Errno: 0 Last_SQL_Error: Replicate_Ignore_Server_Ids: Master_Server_Id: 0 1 row in set (0.00 sec)

  Read the article

• Server 2012, ADFS 2.1, and Office 365

  - by Matt Bear

  Has anyone gotten ADFS 2.1 on Server 2012 working with o365 SSO? I have it working up to a point, I tweaked the registry to allow the powershell commands to run, user accounts syncs fine. Even the remote connectivity analyzer shows no errors. But SSO itself does not seem to be passing the credentials correctly. Microsoft claims that ADFS 2.1 is not supported to work with o365, but I'm just being stubborn and not giving up that easy.

  Read the article

< Previous Page | 429 430 431 432 433 434 435 436 437 438 439 440  | Next Page >