stop execution - Page 434

Building a database installer with WiX, datadude and Visual Studio 2010

- by jamiet

Today I have been using Windows Installer XML (WiX) to build an installer (.msi file) that would install a SQL Server database on a server of my choosing; the source code for that database lives in datadude (a tool which you may know by one of quite a few other names). The basis for this work was a most excellent blog post by Duke Kamstra entitled Implementing a WIX installer that calls the GDR version of VSDBCMD.EXE which coves the delicate intricacies of doing this – particularly how to call Vsdbcmd.exe in a CustomAction. Unfortunately there are a couple of things wrong with Duke’s post: Searching for “datadude wix” didn’t turn it up in the first page of search results and hence it took me a long time to find it. And I knew that it existed. If someone else were after a post on using WiX with datadude its likely that they would never have come across Duke’s post and that would be a great shame because its the definitive post on the matter. It was written in October 2009 and had not been updated for Visual Studio 2010. Well, this blog post is an attempt to solve those problems. Hopefully I’ve solved the first one just by following a few of my blogging SEO tips while writing this blog post, in the rest of it I will explain how I took Duke’s code and updated it to work in Visual Studio 2010. If you need to build a database installer using WiX, datadude and Visual Studio 2010 then you still need to follow Duke’s blog post so go and do that now. Below are the amendments that I made that enabled the project to get built in Visual Studio 2010: In VS2010 datadude’s output files have changed from being called Database.<suffix> to <ProjectName>_Database.<suffix>. Duke’s code was referencing the old file name formats. Duke used $(var.SolutionDir) and relative paths to point to datadude artefacts I have replaced these with Votive Project References http://wix.sourceforge.net/manual-wix3/votive_project_references.htm I commented out all references to MicrosoftSqlTypesDbschema in DatabaseArtifacts.wxi. I don't think this is produced in VS2010 (I may be wrong about that but it wasn't in the output from my project) Similarly I commented out component MicrosoftSqlTypesDbschema in VsdbcmdArtifacts.wxi. It wasn't where Duke's code said it should have been so am assuming/hoping it isn't needed. Duke's ?define block to work out appropriate SrcArchPath actually wasn't working for me (i.e. <?if $(var.Platform)=x64 ?> was evaluating to false) so I just took out the conditional stuff and declared the path explicitly to the “Program Files (x86)” path. The old code is still there though if you need to put it back. None of the <RegistrySearch> stuff is needed for VS2010 - so I commented it all out! Changed to use /manifest option rather than /model option on vsdbcmd.exe command-line. Personal preference is all! Added a new component in order to bundle along the vsdbcmd.exe.config file Made the install of the Custom Action dependent on the relevant feature being selected for install. This one is actually really important – deselecting the database feature for installation does not, by default, stop the CustomAction from executing and so would cause an error - so that scenario needs to be catered for I have made my amended solution available for download at: http://cid-550f681dad532637.office.live.com/self.aspx/Public/BlogShare/20110210/InstallMyDatabase.zip It contains two projects: the WiX project and the datadude project that is the source to be deployed (for demo purposes it only contains one table). I have also made the .msi available although in order that it gets through file blockers I changed the name from InstallMyDatabase.msi to InstallMyDatabase.ms_ – simply rename the file back once you have downloaded it from: http://cid-550f681dad532637.office.live.com/self.aspx/Public/BlogShare/20110210/InstallMyDatabase.ms%5E_ .You can try it out for yourself – the only thing it does is dump the files into %Program Files%\MyDatabase and uses them to install a database onto a server of your choosing with a name of your choosing - no damaging side-affects. I will caveat this by saying “it works on my machine” and, not having access to a plethora of different machines, I haven’t tested it anywhere else. One potential issue that I know of is that Vsdbcmd.exe has a dependency on SQL Server CE although if you have SQL Server tools or Visual Studio installed you should be fine. Unfortunately its not possible to bundle along the SQL Server CE installer in the .msi because Windows will not allow you to call one installer from inside another – the recommended way to get around this problem is to build a bootstrapper to bundle the whole lot together but doing that is outside the scope of this blog post. If you discover any other issues then please let me know. Here are the screenshots from the installer: And once installed…. Hope this is useful! @jamiet

Read the article

How to Play FLAC Files in Windows 7 Media Center & Player

- by Mysticgeek

An annoyance for music lovers who enjoy FLAC format, is there’s no native support for WMP or WMC. If you’re a music enthusiast who prefers FLAC format, we’ll look at adding support to Windows 7 Media Center and Player. For the following article we are using Windows 7 Home Premium 32-bit edition. Download and Install madFLAC v1.8 The first thing we need to do is download and install the madFLAC v1.8 decoder (link below). Just unzip the file and run install.bat… You’ll get a message that it has been successfully registered, click Ok. To verify everything is working, open up one of your FLAC files with WMP, and you’ll get the following message. Check the box Don’t ask me again for this extension and click Yes. Now Media Player should play the track you’ve chosen. Delete Current Music Library But what if you want to add your entire collection of FLAC files to the Library? If you already have it set up as your default music player, unfortunately we need to remove the current library and delete the database. The best way to manage the music library in Windows 7 is via WMP 12. Since we don’t want to delete songs from the computer we need to Open WMP, press “Alt+T” and navigate to Tools \ Options \ Library. Now uncheck the box Delete files from computer when deleted from library and click Ok. Now in your Library click “Ctrl + A” to highlight all of the songs in the Library, then hit the “Delete” key. If you have a lot of songs in your library (like on our system) you’ll see the following dialog box while it collects all of the information. After all of the data is collected, make sure the radio button next to Delete from library only is marked and click Ok. Again you’ll see the Working progress window while the songs are deleted. Deleting Current Database Now we need to make sure we’re starting out fresh. Close out of Media Player, then we’ll basically follow the same directions The Geek pointed out for fixing the WMP Library. Click on Start and type in services.msc into the search box and hit Enter. Now scroll down and stop the service named Windows Media Player Network Sharing Service. Now, navigate to the following directory and the main file to delete CurrentDatabase_372.wmdb %USERPROFILE%\Local Settings\Application Data\Microsoft\Media Player\ Again, the main file to delete is CurrentDatabase_372.wmdb, though if you want, you can delete them all. If you’re uneasy about deleting these files, make sure to back them up first. Now after you restart WMP you can begin adding your FLAC files. For those of us with large collections, it’s extremely annoying to see WMP try to pick up all of your media by default. To delete the other directories go to Organize \ Manage Libraries then open the directories you want to remove. For example here we’re removing the default libraries it tries to check for music. Remove the directories you don’t want it to gather contents from in each of the categories. We removed all of the other collections and only added the FLAC music directory from our home server. SoftPointer Tag Support Plugin Even though we were able to get FLAC files to play in WMP and WMC at this point, there’s another utility from SoftPointer to add. It enables FLAC (and other file formats) to be picked up in the library much easier. It has a long name but is effective –M4a/FLAC/Ogg/Ape/Mpc Tag Support Plugin for Media Player and Media Center (link below). Just install it by accepting the defaults, and you’ll be glad you did. After installing it, and re-launching Media Player, give it some time to collect all of the data from your FLAC directory…it can take a while. In fact, if your collection is huge, just walk away and let it do its thing. If you try to use it right away, WMP slows down considerably while updating the library. Once the library is setup you’ll be able to play your FLAC tunes in Windows 7 Media Center as well and Windows Media Player 12. Album Art One caveat is that some of our albums didn’t show any cover art. But we were usually able to get it by right-clicking the album and selecting Find album info. Then confirming the album information is correct… Conclusion Although this seems like several steps to go through to play FLAC files in Windows 7 Media Center and Player, it seems to work really well after it’s set up. We haven’t tried this with a 64-bit machine, but the process should be similar, but you might want to make sure the codecs you use are 64-bit. We’re sure there are other methods out there that some of you use, and if so leave us a comment and tell us about it. Download madFlac V1.8 M4a/FLAC/Ogg/Ape/Mpc Tag Support Plugin for Media Player and Media Center from SoftPointer Similar Articles Productive Geek Tips How to Play .OGM Video Files in Windows VistaFixing When Windows Media Player Library Won’t Let You Add FilesUsing Netflix Watchnow in Windows Vista Media Center (Gmedia)Kantaris is a Unique Media Player Based on VLCEasily Change Audio File Formats with XRECODE TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional OutSync will Sync Photos of your Friends on Facebook and Outlook Windows 7 Easter Theme YoWindoW, a real time weather screensaver Optimize your computer the Microsoft way Stormpulse provides slick, real time weather data Geek Parents – Did you try Parental Controls in Windows 7?

Read the article

Thursday Community Keynote: "By the Community, For the Community"

- by Janice J. Heiss

Sharat Chander, JavaOne Community Chairperson, began Thursday's Community Keynote. As part of the morning’s theme of "By the Community, For the Community," Chander noted that 60% of the material at the 2012 JavaOne conference was presented by Java Community members. "So next year, when the call for papers starts, put-in your submissions," he urged.From there, Gary Frost, Principal Member of Technical Staff, AMD, expanded upon Sunday's Strategy Keynote exploration of Project Sumatra, an OpenJDK project targeted at bringing Java to heterogeneous computing platforms (which combine the CPU and the parallel processor of the GPU into a single piece of silicon). Sumatra entails enhancing the JVM to make maximum use of these advanced platforms. Within this development space, AMD created the Aparapi API, which converts Java bytecode into OpenCL for execution on such GPU devices. The Aparapi API was open sourced in September 2011.Whether it was zooming-in on a Mandelbrot set, "the game of life," or a swarm of 10,000 Dukes in a space-bound gravitational dance, Frost's demos, using an Aparapi/OpenCL implementation, produced stunningly faster display results. He indicated that the Java 9 timeframe is where they see Project Sumatra coming to ultimate fruition, employing the Lamdas of Java 8.Returning to the theme of the keynote, Donald Smith, Director, Java Product Management, Oracle, explored a mind map graphic demonstrating the importance of Community in terms of fostering innovation. "It's the sharing and mixing of culture, the diversity, and the rapid prototyping," he said. Within this topic, Smith, brought up a panel of representatives from Cloudera, Eclipse, Eucalyptus, Perrone Robotics, and Twitter--ideal manifestations of community and innovation in the world of Java.Marten Mickos, CEO, Eucalyptus Systems, explored his company's open source cloud software platform, written in Java, and used by gaming companies, technology companies, media companies, and more. Chris Aniszczyk, Operations Engineering,Twitter, noted the importance of the JVM in terms of their multiple-language development environment. Mike Olson, CEO, Cloudera, described his company's Apache Hadoop-based software, support, and training. Mike Milinkovich, Executive Director, Eclipse Foundation, noted that they have about 270 tools projects at Eclipse, with 267 of them written in Java. Milinkovich added that Eclipse will even be going into space in 2013, as part of the control software on various experiments aboard the International Space Station. Lastly, Paul Perrone, CEO, Perrone Robotics, detailed his company's robotics and automation software platform built 100% on Java, including Java SE and Java ME--"on rat, to cat, to elephant-sized systems." Milinkovic noted that communities are by nature so good at innovation because of their very openness--"The more open you make your innovation process, the more ideas are challenged, and the more developers are focused on justifying their choices all the way through the process."From there, Georges Saab, VP Development Java SE OpenJDK, continued the topic of innovation and helping the Java Community to "Make the Future Java." Martijn Verburg, representing the London Java Community (winner of a Duke's Choice Award 2012 for their activity in OpenJDK and JCP), soon joined Saab onstage. Verburg detailed the LJC's "Adopt a JSR" program--"to get day-to-day developers more involved in the innovation that's happening around them." From its London launching pad, the innovative program has spread to Brazil, Morocco, Latvia, India, and more.Other active participants in the program joined Verburg onstage--Ben Evans, London Java Community; James Gough, Stackthread; Bruno Souza, SOUJava; Richard Warburton, jClarity; and Cecelia Borg, Oracle--OpenJDK Onboarding. Together, the group explored the goals and tasks inherent in the Adopt a JSR program--from organizing hack days (testing prototype implementations), to managing mailing lists and forums, to triaging issues, to evangelism—all with the goal of fostering greater community/developer involvement, but equally importantly, building better open standards. “Come join us, and make your ecosystem better!" urged Verburg.Paul Perrone returned to profile the latest in his company's robotics work around Java--including the AARDBOTS family of smaller robotic vehicles, running the Perrone MAX platform on top of the Java JVM. Perrone took his "Rumbles" four-wheeled robot out for a spin onstage--a roaming, ARM-based security-bot vehicle, complete with IR, ultrasonic, and "cliff" sensors (the latter, for the raised stage at JavaOne). As an ultimate window into the future of robotics, Perrone displayed a "head-set" controller--a sensor directed at the forehead to monitor brainwaves, for the someday-implementation of brain-to-robot control.Then, just when it seemed this might be the end of the day's futuristic offerings, a mystery voice from offstage pronounced "I've got some toys"--proving to be guest-visitor James Gosling, there to explore his cutting-edge work with Liquid Robotics. While most think of robots as something with wheels or arms or lasers, Gosling explained, the Liquid Robotics vehicle is an entirely new and innovative ocean-going 'bot. Looking like a floating surfboard, with an attached set of underwater wings, the autonomous devices roam the oceans using only the energy of ocean waves to propel them, and a single actuated rudder to steer. "We have to accomplish all guidance just by wiggling the rudder," Gosling said. The devices offer applications from self-installing weather buoy, to pollution monitoring station, to marine mammal monitoring device, to climate change data gathering, to even ocean life genomic sampling. The early versions of the vehicle used C code on very tiny industrial micro controllers, where they had to "count the bytes one at a time." But the latest generation vehicles, which just hit the water a week or so ago, employ an ARM processor running Linux and the ARM version of JDK 7. Gosling explained that vehicle communication from remote locations is achieved via the Iridium satellite network. But because of the costs of this communication path, the data must be sent in very small bursts--using SBD short burst data. "It costs $1/kb, so that rules everything in the software design,” said Gosling. “If you were trying to stream a Netflix video over this, it would cost a million dollars a movie. …We don't have a 'big data' problem," he quipped. There are currently about 150 Liquid Robotics vehicles out traversing the oceans. Gosling demonstrated real time satellite tracking of several vehicles currently at sea, noting that Java is actually particularly good at AI applications--due to the language having garbage collection, which facilitates complex data structures. To close-out his time onstage, Gosling of course participated in the ceremonial Java tee-shirt toss out to the audience…In parting, Chander passed the JavaOne Community Chairperson baton to Stephen Chin, Java Technology Evangelist, Oracle. Onstage in full motorcycle gear, Chin noted that he'll soon be touring Europe by motorcycle, meeting Java Community Members and streaming live via UStream--the ultimate manifestation of community and technology! He also reminded attendees of the upcoming JavaOne Latin America 2012, São Paulo, Brazil (December 4-6, 2012), and stated that the CFP (call for papers) at the conference has been extended for one more week. "Remember, December is summer in Brazil!" Chin said.

Read the article

SQL Developer at Oracle Open World 2012

- by thatjeffsmith

We have a lot going on in San Francisco this fall. One of the most personal exciting bits, for what will be my 4th or 5th Open World, is that this will be my FIRST as a member of Team Oracle. I’ve presented once before, but most years it was just me pressing flesh at the vendor booths. After 3-4 days of standing and talking, you’re ready to just go home and not do anything for a few weeks. This time I’ll have a chance to walk around and talk with our users and get a good idea of what’s working and what’s not. Of course it will be a great opportunity for you to find us and get to know your SQL Developer team! 3.4 miles across and back – thanks Ashley for signing me up for the run! This year is going to be a bit crazy. Work wise I’ll be presenting twice, working a booth, and proctoring several of our Hands-On Labs. The fun parts will be equally crazy though – running across the Bay Bridge (I don’t run), swimming the Bay (I don’t swim), having my wife fly out on Wednesday for the concert, and then our first WhiskyFest on Friday (I do drink whisky though.) But back to work – let’s talk about EVERYTHING you can expect from the SQL Developer team. Booth Hours We’ll have 2 ‘demo pods’ in the Exhibition Hall over at Moscone South. Look for the farm of Oracle booths, we’ll be there under the signs that say ‘SQL Developer.’ There will be several people on hand, mostly developers (yes, they still count as people), who can answer your questions or demo the latest features. Come by and say ‘Hi!’, and let us know what you like and what you think we can do better. Seriously. Monday 10AM – 6PM Tuesday 9:45AM – 6PM Wednesday 9:45AM – 4PM Presentations Stop by for an hour, pull up a chair, sit back and soak in all the SQL Developer goodness. You’ll only have to suffer my bad jokes for two of the presentations, so please at least try to come to the other ones. We’ll be talking about data modeling, migrations, source control, and new features in versions 3.1 and 3.2 of SQL Developer and SQL Developer Data Modeler. Day Time Event Monday 10:454:45 What’s New in SQL Developer Why Move to Oracle Application Express Listener Tueday 10:1511:455:00 Using Subversion in Oracle SQL Developer Data Modeler Oracle SQL Developer Tips & Tricks Database Design with Oracle SQL Developer Data Modeler Wednesday 11:453:30 Migrating Third-Party Databases and Applications to Oracle Exadata 11g Enterprise Options and Management Packs for Developers Hands On Labs (HOLs) The Hands On Labs allow you to come into a classroom environment, sit down at a computer, and run through some exercises. We’ll provide the hardware, software, and training materials. It’s self-paced, but we’ll have several helpers walking around to answer questions and chat up any SQL Developer or database topic that comes to mind. If your employer is sending you to Open World for all that great training, the HOLs are a great opportunity to capitalize on that. They are only 60 minutes each, so you don’t have to worry about burning out. And there’s no homework! Of course, if you do want to take the labs home with you, many are already available via the Developer Day Hands-On Database Applications Developer Lab. You will need your own computer for those, but we’ll take care of the rest. Wednesday PL/SQL Development and Unit Testing with Oracle SQL Developer 10:15 Performance Tuning with Oracle SQL Developer 11:45 Thursday The Soup to Nuts of Data Modeling with Oracle SQL Developer Data Modeler 11:15 Some Parting Advice Always wanted to meet your favorite Oracle authors, speakers, and thought-leaders? Don’t be shy, walk right up to them and introduce yourself. Normal social rules still apply, but at the conference everyone is open and up for meeting and talking with attendees. Just understand if there’s a line that you might only get a minute or two. It’s a LONG conference though, so you’ll have plenty of time to catch up with everyone. If you’re going to be around on Tuesday evening, head on over to the OTN Lounge from 4:30 to 6:30 and hang out for our Tweet Meet. That’s right, all the Oracle nerds on Twitter will be there in one place. Be sure to put your Twitter handle on your name tag so we know who you are!

Read the article

BNF – how to read syntax?

- by Piotr Rodak

A few days ago I read post of Jen McCown (blog) about her idea of blogging about random articles from Books Online. I think this is a great idea, even if Jen says that it’s not exciting or sexy. I noticed that many of the questions that appear on forums and other media arise from pure fact that people asking questions didn’t bother to read and understand the manual – Books Online. Jen came up with a brilliant, concise acronym that describes very well the category of posts about Books Online – RTFM365. I take liberty of tagging this post with the same acronym. I often come across questions of type – ‘Hey, i am trying to create a table, but I am getting an error’. The error often says that the syntax is invalid. 1 CREATE TABLE dbo.Employees 2 (guid uniqueidentifier CONSTRAINT DEFAULT Guid_Default NEWSEQUENTIALID() ROWGUIDCOL, 3 Employee_Name varchar(60) 4 CONSTRAINT Guid_PK PRIMARY KEY (guid) ); 5 The answer is usually(1), ‘Ok, let me check it out.. Ah yes – you have to put name of the DEFAULT constraint before the type of constraint: 1 CREATE TABLE dbo.Employees 2 (guid uniqueidentifier CONSTRAINT Guid_Default DEFAULT NEWSEQUENTIALID() ROWGUIDCOL, 3 Employee_Name varchar(60) 4 CONSTRAINT Guid_PK PRIMARY KEY (guid) ); Why many people stumble on syntax errors? Is the syntax poorly documented? No, the issue is, that correct syntax of the CREATE TABLE statement is documented very well in Books Online and is.. intimidating. Many people can be taken aback by the rather complex block of code that describes all intricacies of the statement. However, I don’t know better way of defining syntax of the statement or command. The notation that is used to describe syntax in Books Online is a form of Backus-Naur notatiion, called BNF for short sometimes. This is a notation that was invented around 50 years ago, and some say that even earlier, around 400 BC – would you believe? Originally it was used to define syntax of, rather ancient now, ALGOL programming language (in 1950’s, not in ancient India). If you look closer at the definition of the BNF, it turns out that the principles of this syntax are pretty simple. Here are a few bullet points: italic_text is a placeholder for your identifier <italic_text_in_angle_brackets> is a definition which is described further. [everything in square brackets] is optional {everything in curly brackets} is obligatory everything | separated | by | operator is an alternative ::= “assigns” definition to an identifier Yes, it looks like these six simple points give you the key to understand even the most complicated syntax definitions in Books Online. Books Online contain an article about syntax conventions – have you ever read it? Let’s have a look at fragment of the CREATE TABLE statement: 1 CREATE TABLE 2 [ database_name . [ schema_name ] . | schema_name . ] table_name 3 ( { <column_definition> | <computed_column_definition> 4 | <column_set_definition> } 5 [ <table_constraint> ] [ ,...n ] ) 6 [ ON { partition_scheme_name ( partition_column_name ) | filegroup 7 | "default" } ] 8 [ { TEXTIMAGE_ON { filegroup | "default" } ] 9 [ FILESTREAM_ON { partition_scheme_name | filegroup 10 | "default" } ] 11 [ WITH ( <table_option> [ ,...n ] ) ] 12 [ ; ] Let’s look at line 2 of the above snippet: This line uses rules 3 and 5 from the list. So you know that you can create table which has specified one of the following. just name – table will be created in default user schema schema name and table name – table will be created in specified schema database name, schema name and table name – table will be created in specified database, in specified schema database name, .., table name – table will be created in specified database, in default schema of the user. Note that this single line of the notation describes each of the naming schemes in deterministic way. The ‘optionality’ of the schema_name element is nested within database_name.. section. You can use either database_name and optional schema name, or just schema name – this is specified by the pipe character ‘|’. The error that user gets with execution of the first script fragment in this post is as follows: Msg 156, Level 15, State 1, Line 2 Incorrect syntax near the keyword 'DEFAULT'. Ok, let’s have a look how to find out the correct syntax. Line number 3 of the BNF fragment above contains reference to <column_definition>. Since column_definition is in angle brackets, we know that this is a reference to notion described further in the code. And indeed, the very next fragment of BNF contains syntax of the column definition. 1 <column_definition> ::= 2 column_name <data_type> 3 [ FILESTREAM ] 4 [ COLLATE collation_name ] 5 [ NULL | NOT NULL ] 6 [ 7 [ CONSTRAINT constraint_name ] DEFAULT constant_expression ] 8 | [ IDENTITY [ ( seed ,increment ) ] [ NOT FOR REPLICATION ] 9 ] 10 [ ROWGUIDCOL ] [ <column_constraint> [ ...n ] ] 11 [ SPARSE ] Look at line 7 in the above fragment. It says, that the column can have a DEFAULT constraint which, if you want to name it, has to be prepended with [CONSTRAINT constraint_name] sequence. The name of the constraint is optional, but I strongly recommend you to make the effort of coming up with some meaningful name yourself. So the correct syntax of the CREATE TABLE statement from the beginning of the article is like this: 1 CREATE TABLE dbo.Employees 2 (guid uniqueidentifier CONSTRAINT Guid_Default DEFAULT NEWSEQUENTIALID() ROWGUIDCOL, 3 Employee_Name varchar(60) 4 CONSTRAINT Guid_PK PRIMARY KEY (guid) ); That is practically everything you should know about BNF. I encourage you to study the syntax definitions for various statements and commands in Books Online, you can find really interesting things hidden there. Technorati Tags: SQL Server,t-sql,BNF,syntax (1) No, my answer usually is a question – ‘What error message? What does it say?’. You’d be surprised to know how many people think I can go through time and space and look at their screen at the moment they received the error.

Read the article

Java ME SDK 3.2 is now live

- by SungmoonCho

Hi everyone, It has been a while since we released the last version. We have been very busy integrating new features and making lots of usability improvements into this new version. Datasheet is available here. Please visit Java ME SDK 3.2 download page to get the latest and best version yet! Some of the new features in this version are described below. Embedded Application SupportOracle Java ME SDK 3.2 now supports the new Oracle® Java ME Embedded. This includes support for JSR 228, the Information Module Profile-Next Generation API (IMP-NG). You can test and debug applications either on the built-in device emulators or on your device. Memory MonitorThe Memory Monitor shows memory use as an application runs. It displays a dynamic detailed listing of the memory usage per object in table form, and a graphical representation of the memory use over time. Eclipse IDE supportOracle Java ME SDK 3.2 now officially supports Eclipse IDE. Once you install the Java ME SDK plugins on Eclipse, you can start developing, debugging, and profiling your mobile or embedded application. Skin CreatorWith the Custom Device Skin Creator, you can create your own skins. The appearance of the custom skins is generic, but the functionality can be tailored to your own specifications. Here are the release highlights. Implementation and support for the new Oracle® Java Wireless Client 3.2 runtime and the Oracle® Java ME Embedded runtime. The AMS in the CLDC emulators has a new look and new functionality (Install Application, Manage Certificate Authorities and Output Console). Support for JSR 228, the Information Module Profile-Next Generation API (IMP-NG). The IMP-NG platform is implemented as a subset of CLDC. Support includes: A new emulator for headless devices. Javadocs for the following Oracle APIs: Device Access API, Logging API, AMS API, and AccessPoint API. New demos for IMP-NG features can be run on the emulator or on a real device running the Oracle® Java ME Embedded runtime. New Custom Device Skin Creator. This tool provides a way to create and manage custom emulator skins. The skin appearance is generic, but the functionality, such as the JSRs supported or the device properties, are up to you. This utility only supported in NetBeans. Eclipse plugin for CLDC/MIDP. For the first time Oracle Java ME SDK is available as an Eclipse plugin. The Eclipse version does not support CDC, the Memory Monitor, and the Custom Device Skin Creator in this release. All Java ME tools are implemented as NetBeans plugins. As of the plugin integrates Java ME utilities into the standard NetBeans menus. Tools > Java ME menu is the place to launch Java ME utilities, including the new Skin Creator. Profile > Java ME is the place to work with the Network Monitor and the Memory Monitor. Use the standard NetBeans tools for debugging. Profiling, Network monitoring, and Memory monitoring are integrated with the NetBeans profiling tools. New network monitoring protocols are supported in this release: WMA, SIP, Bluetooth and OBEX, SATSA APDU and JCRMI, and server sockets. Java ME SDK Update Center. Oracle Java ME SDK can be updated or extended by new components. The Update Center can download, install, and uninstall plugins specific to the Java ME SDK. A plugin consists of runtime components and skins. Bug fixes and enhancements. This version comes with a few known problems. All of them have workarounds, so I hope you don't get stuck in these issues when you are using the product. It you cannot watch static variables during an Eclipse debugging session, and sometimes the Variable view cannot show data. In the source code, move the mouse over the required variable to inspect the variable value. A real device shown in the Device Selector is deleted from the Device Manager, yet it still appears. Kill the device manager in the system tray, and relaunch it. Then you will see the device removed from the list. On-device profiling does not work on a device. CPU profiling, networking monitoring, and memory monitoring do not work on the device, since the device runtime does not yet support it. Please do the profiling with your emulator first, and then test your application on the device. In the Device Selector, using Clean Database on real external device causes a null pointer exception. External devices do not have a database recognized by the SDK, so you can disregard this exception message. Suspending the Emulator during a Memory Monitor session hangs the emulator. Do not use the Suspend option (F5) while the Memory Monitor is running. If the emulator is hung, open the Windows task manager and stop the emulator process (javaw). To switch to another application while the Memory Monitor is running, choose Application > AMS Home (F4), and select a different application. Please let us know how we can improve it even better, by sending us your feedback. -Java ME SDK Team

Read the article

Bye Bye Year of the Dragon, Hello BPM

- by Ajay Khanna

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} As 2012 fades and we usher in a New Year, let’s look back at some of the hottest BPM trends and those we’ll be seeing more of in the coming months. BPM is as much about people as it is about technology. As people adopt new ways of engagement, new channels of communications and new devices to interact , the changes are reflected in BPM practices. As Social and Mobile have become an integral part of our personal and professional lives, we’ll see tighter integration of social and mobile with BPM, and more use cases emerging for smarter process management in 2013. And with products and services becoming less differentiated, organizations will strive to differentiate on Customer Experience. Concepts like Pace Layered Architecture and Dynamic Case Management will provide more flexibility and agility to IT groups and knowledge workers. Take a look at some of these capabilities we showcased (see video) at Oracle OpenWorld 2012. Some of these trends that will continue to gain momentum in 2013: Social networks and social media have provided a new way for businesses to engage with customers. A prospect is likely to reach out to their social network before making any purchase. Companies are increasingly engaging with customers in social networks to influence their purchasing decisions, as well as listening to customers via tools like sentiment analysis to see what customers think about a particular product or process. These insights are valuable as companies look to improve their processes. Inside organizations, workers are using social tools to engage with each other to design new products and processes. Social collaboration tools are being used to resolve issues where an employee needs consultation to reach a decision. Oracle BPM Suite includes social interaction as an integral part of its process design and work management to empower today’s business users. Ubiquitous smart mobile devices are trending as a tool of choice for many workers. Many companies are adopting the policy of “Bring Your Own Device,” and the device of choice is a tablet. Devices like smart phones and tablets not only provide mobility to workers and customers, but they also provide additional important information – the context. By integrating the mobile context (location, photos, and preferences) into your processes, organizations can make much more informed decisions, as well as offer more personalized service to customers. Using Oracle ADF Mobile, you can easily create user interfaces for mobile devices and also capture location data for process execution. Customer experience was at the forefront of trending topics in 2012. Organizations are trying to understand their customers better and offer them more personalized and differentiated services. Customer experience is paramount when companies design sales and support processes. Companies are looking to BPM to consistently and efficiently orchestrate customer facing processes across disparate systems, departments and channels of communication. Oracle BPM Suite provides just the right capabilities for organizations to design and deliver an excellent customer experience. Pace Layered Architecture strategy is gaining traction as a way to maximize agility and minimize disruption in organizations. It provides a framework to manage the evolution of your information system when different pieces of it are changing at different rates and need to be updated independent of one another. Oracle Fusion Middleware and Oracle BPM Suite are designed with this in mind. The database layer, integration layer, application layer, and process layer should not be required to change at the same time. Most of the business changes to policy or process can be done at the process layer without disrupting the whole infrastructure. By understanding the type of change needed at a particular level, organizations can become much more agile and efficient. Adaptive Case Management proposes more flexibility to manage processes or cases that do not follow a structured process flow. In such situations, the knowledge worker managing the case needs to evaluate what step should occur next because the sequence of steps can’t be predetermined. Another characteristic is that it requires much more collaboration than straight-through process. As simple processes become automated, and customers adopt more and more self-service, cases that reach the case workers are much more complex and need more investigation. Oracle BPM suite includes comprehensive adaptive case management capability to manage such unstructured and complex processes. Smart BPM or making your BPM intelligent has been the holy grail for BPM practitioners who imagined that one day BPM would become one with Business Intelligence, Business Activity Monitoring and Complex Event Processing, making it much more responsive and helpful in organizational decision making. In 2013, organizations will begin to deploy these intelligent BPM solutions. Oracle offers an integrated solution that brings together the powerful functionality of BI, BAM, event processing, and Real Time Decisions to help organizations create smart process based solutions. In order to help customers reach their BPM goals faster and remove risks associated with BPM initiatives, Oracle has introduced Oracle Process Accelerators, pre-built best practices applications built on Oracle BPM Suite that are fully production grade and ready to deploy. These are exiting times for BPM practitioners and there is so much to look forward to in 2013. We wish you a very happy and prosperous New Year 2013. Happy BPMing!

Read the article

Convert Video and Remove Commercials in Windows 7 Media Center with MCEBuddy 1.1

- by DigitalGeekery

Today look at MCEBuddy for Windows 7 Media Center. This handy app automatically takes your recorded TV files and converts them to MP4, AVI, WMV, or MPEG format. It even has the option to cut out those annoying commercials during the conversion process. Installation and Configuration Download and extract MCE Buddy. (Download link below) Run the setup.exe file and take all the default settings. Open MCEBuddy Configuration by going to Start > All Programs > MCEBuddy > MCEBuddy Configuration. Video Paths The MCEBuddy application is comprised of a single window. The first step you’ll want to take is to define your Source and Destination paths. The “Source” will most likely be your Recorded TV directory. The Destination should NOT be the same as the Source folder. Note: The Recorded TV directory in Windows 7 Media Center will only display and play WTV & DVR-MS files. To watch the converted MP4, AVI, WMV, or MPEG files in Windows Media Center you’ll need to add them to your Video Library or Movie Library. Video Conversion Next, choose your preferred format for conversion from the “Convert to” drop down list. The default is MP4 with the H.264 codec. You’ll find a wide variety of formats. The first set of conversion options in the drop down list will resize the video to 720 pixels wide. The next two sections maintain the original size, and the final section is for a variety of portable devices. Next, you’ll see a group of check boxes below the “Convert to” drop down list. The Commercial Skipping option will cut the commercials while converting the file. Sort By Series will create a sub-folder in your Destination folder for each TV show. Delete Original will delete the WTV file after conversion is complete. (This option is not recommended unless you are sure your files are converting properly and you no longer need the WTV file.) Start Minimized is ideal if you want to run MCEBuddy on Windows startup. Note: MCEBuddy installs and uses Comskip for commercial cutting by default. However, if you have ShowAnalyzer installed, it will use that application instead. Advanced Options To choose a specific time of day to perform the conversions, click the checkbox under the “Advanced Options,” and select the starting and ending times for conversion. For example, convert between 2 hours and 5 hours would be between 2 am and 5am. If you want MCEBuddy to constantly look for and immediately convert new recordings, leave the box unchecked. The “Video age” option lets you choose a specific number of days to wait before performing the conversion. This can be useful if you want to watch the recordings first and delete those you don’t wish to convert. You can also choose the “Sub Directories” if you’d like MCEBuddy to convert files that are in a sub-folder in your “Source” directory. Second Conversion As you might expect, this option allows MCEBuddy to perform a second conversion of your file. This can be useful if you want to use your first conversion to create a higher quality MP4 or AVI file for playback on a larger screen, and a second one for a portable device such as Zune or iPhone. The same options from the first conversion are also available for the second. You’ll want to choose a separate Destination folder for the second conversion. Start and Monitor Progress To start converting your video files, simply press the “Start” button at the bottom. You’ll be able to follow the progress in the “Current Activity” section. When all the video files have finished converting, or there are no current files to convert, MCEBuddy will display a “Started – Idle” status. Click “Stop” if you don’t want MCEBuddy to continue scanning for new files. Conclusion MCEBuddy 1.1 will convert all WTV files in it’s source folder. If you want to pick and choose which recordings to convert, you may want to define a source folder different than the Recorded TV folder and then just copy or move the files you wish to convert into the new source folder. The conversion process does take a good bit of time. If you choose the commercial skipping and second conversion options it can take several hours to fully convert one TV recording. Overall, MCEBuddy makes a nice Media Center addition for those that want to save some space with smaller size files, convert Recorded TV files for their portable device, or automatically remove commercials. If you’re looking for a different method to skip commercials check out our post on how to skip commercials in Windows 7 Media Center. Download MCEBuddy 1.1 Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)How To Skip Commercials in Windows 7 Media CenterHow To Convert Video Files to MP3 with VLCStartup Customizations for Media Center in Windows 7Add Folders to the Movie Library in Windows 7 Media Center TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional The Ultimate Excel Cheatsheet Convert the Quick Launch Bar into a Super Application Launcher Automate Tasks in Linux with Crontab Discover New Bundled Feeds in Google Reader Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam

Read the article

Analytic functions – they’re not aggregates

- by Rob Farley

SQL 2012 brings us a bunch of new analytic functions, together with enhancements to the OVER clause. People who have known me over the years will remember that I’m a big fan of the OVER clause and the types of things that it brings us when applied to aggregate functions, as well as the ranking functions that it enables. The OVER clause was introduced in SQL Server 2005, and remained frustratingly unchanged until SQL Server 2012. This post is going to look at a particular aspect of the analytic functions though (not the enhancements to the OVER clause). When I give presentations about the analytic functions around Australia as part of the tour of SQL Saturdays (starting in Brisbane this Thursday), and in Chicago next month, I’ll make sure it’s sufficiently well described. But for this post – I’m going to skip that and assume you get it. The analytic functions introduced in SQL 2012 seem to come in pairs – FIRST_VALUE and LAST_VALUE, LAG and LEAD, CUME_DIST and PERCENT_RANK, PERCENTILE_CONT and PERCENTILE_DISC. Perhaps frustratingly, they take slightly different forms as well. The ones I want to look at now are FIRST_VALUE and LAST_VALUE, and PERCENTILE_CONT and PERCENTILE_DISC. The reason I’m pulling this ones out is that they always produce the same result within their partitions (if you’re applying them to the whole partition). Consider the following query: SELECT YEAR(OrderDate), FIRST_VALUE(TotalDue) OVER (PARTITION BY YEAR(OrderDate) ORDER BY OrderDate, SalesOrderID RANGE BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING), LAST_VALUE(TotalDue) OVER (PARTITION BY YEAR(OrderDate) ORDER BY OrderDate, SalesOrderID RANGE BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING), PERCENTILE_CONT(0.95) WITHIN GROUP (ORDER BY TotalDue) OVER (PARTITION BY YEAR(OrderDate)), PERCENTILE_DISC(0.95) WITHIN GROUP (ORDER BY TotalDue) OVER (PARTITION BY YEAR(OrderDate)) FROM Sales.SalesOrderHeader ; This is designed to get the TotalDue for the first order of the year, the last order of the year, and also the 95% percentile, using both the continuous and discrete methods (‘discrete’ means it picks the closest one from the values available – ‘continuous’ means it will happily use something between, similar to what you would do for a traditional median of four values). I’m sure you can imagine the results – a different value for each field, but within each year, all the rows the same. Notice that I’m not grouping by the year. Nor am I filtering. This query gives us a result for every row in the SalesOrderHeader table – 31465 in this case (using the original AdventureWorks that dates back to the SQL 2005 days). The RANGE BETWEEN bit in FIRST_VALUE and LAST_VALUE is needed to make sure that we’re considering all the rows available. If we don’t specify that, it assumes we only mean “RANGE BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW”, which means that LAST_VALUE ends up being the row we’re looking at. At this point you might think about other environments such as Access or Reporting Services, and remember aggregate functions like FIRST. We really should be able to do something like: SELECT YEAR(OrderDate), FIRST_VALUE(TotalDue) OVER (PARTITION BY YEAR(OrderDate) ORDER BY OrderDate, SalesOrderID RANGE BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) FROM Sales.SalesOrderHeader GROUP BY YEAR(OrderDate) ; But you can’t. You get that age-old error: Msg 8120, Level 16, State 1, Line 5 Column 'Sales.SalesOrderHeader.OrderDate' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause. Msg 8120, Level 16, State 1, Line 5 Column 'Sales.SalesOrderHeader.SalesOrderID' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause. Hmm. You see, FIRST_VALUE isn’t an aggregate function. None of these analytic functions are. There are too many things involved for SQL to realise that the values produced might be identical within the group. Furthermore, you can’t even surround it in a MAX. Then you get a different error, telling you that you can’t use windowed functions in the context of an aggregate. And so we end up grouping by doing a DISTINCT. SELECT DISTINCT YEAR(OrderDate), FIRST_VALUE(TotalDue) OVER (PARTITION BY YEAR(OrderDate) ORDER BY OrderDate, SalesOrderID RANGE BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING), LAST_VALUE(TotalDue) OVER (PARTITION BY YEAR(OrderDate) ORDER BY OrderDate, SalesOrderID RANGE BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING), PERCENTILE_CONT(0.95) WITHIN GROUP (ORDER BY TotalDue) OVER (PARTITION BY YEAR(OrderDate)), PERCENTILE_DISC(0.95) WITHIN GROUP (ORDER BY TotalDue) OVER (PARTITION BY YEAR(OrderDate)) FROM Sales.SalesOrderHeader ; I’m sorry. It’s just the way it goes. Hopefully it’ll change the future, but for now, it’s what you’ll have to do. If we look in the execution plan, we see that it’s incredibly ugly, and actually works out the results of these analytic functions for all 31465 rows, finally performing the distinct operation to convert it into the four rows we get in the results. You might be able to achieve a better plan using things like TOP, or the kind of calculation that I used in http://sqlblog.com/blogs/rob_farley/archive/2011/08/23/t-sql-thoughts-about-the-95th-percentile.aspx (which is how PERCENTILE_CONT works), but it’s definitely convenient to use these functions, and in time, I’m sure we’ll see good improvements in the way that they are implemented. Oh, and this post should be good for fellow SQL Server MVP Nigel Sammy’s T-SQL Tuesday this month.

Read the article

SSIS Lookup component tuning tips

- by jamiet

Yesterday evening I attended a London meeting of the UK SQL Server User Group at Microsoft’s offices in London Victoria. As usual it was both a fun and informative evening and in particular there seemed to be a few questions arising about tuning the SSIS Lookup component; I rattled off some comments and figured it would be prudent to drop some of them into a dedicated blog post, hence the one you are reading right now. Scene setting A popular pattern in SSIS is to use a Lookup component to determine whether a record in the pipeline already exists in the intended destination table or not and I cover this pattern in my 2006 blog post Checking if a row exists and if it does, has it changed? (note to self: must rewrite that blog post for SSIS2008). Fundamentally the SSIS lookup component (when using FullCache option) sucks some data out of a database and holds it in memory so that it can be compared to data in the pipeline. One of the big benefits of using SSIS dataflows is that they process data one buffer at a time; that means that not all of the data from your source exists in the dataflow at the same time and is why a SSIS dataflow can process data volumes that far exceed the available memory. However, that only applies to data in the pipeline; for reasons that are hopefully obvious ALL of the data in the lookup set must exist in the memory cache for the duration of the dataflow’s execution which means that any memory used by the lookup cache will not be available to be used as a pipeline buffer. Moreover, there’s an obvious correlation between the amount of data in the lookup cache and the time it takes to charge that cache; the more data you have then the longer it will take to charge and the longer you have to wait until the dataflow actually starts to do anything. For these reasons your goal is simple: ensure that the lookup cache contains as little data as possible. General tips Here is a simple tick list you can follow in order to tune your lookups: Use a SQL statement to charge your cache, don’t just pick a table from the dropdown list made available to you. (Read why in SELECT *... or select from a dropdown in an OLE DB Source component?) Only pick the columns that you need, ignore everything else Make the database columns that your cache is populated from as narrow as possible. If a column is defined as VARCHAR(20) then SSIS will allocate 20 bytes for every value in that column – that is a big waste if the actual values are significantly less than 20 characters in length. Do you need DT_WSTR typed columns or will DT_STR suffice? DT_WSTR uses twice the amount of space to hold values that can be stored using a DT_STR so if you can use DT_STR, consider doing so. Same principle goes for the numerical datatypes DT_I2/DT_I4/DT_I8. Only populate the cache with data that you KNOW you will need. In other words, think about your WHERE clause! Thinking outside the box It is tempting to build a large monolithic dataflow that does many things, one of which is a Lookup. Often though you can make better use of your available resources by, well, mixing things up a little and here are a few ideas to get your creative juices flowing: There is no rule that says everything has to happen in a single dataflow. If you have some particularly resource intensive lookups then consider putting that lookup into a dataflow all of its own and using raw files to pass the pipeline data in and out of that dataflow. Know your data. If you think, for example, that the majority of your incoming rows will match with only a small subset of your lookup data then consider chaining multiple lookup components together; the first would use a FullCache containing that data subset and the remaining data that doesn’t find a match could be passed to a second lookup that perhaps uses a NoCache lookup thus negating the need to pull all of that least-used lookup data into memory. Do you need to process all of your incoming data all at once? If you can process different partitions of your data separately then you can partition your lookup cache as well. For example, if you are using a lookup to convert a location into a [LocationId] then why not process your data one region at a time? This will mean your lookup cache only has to contain data for the location that you are currently processing and with the ability of the Lookup in SSIS2008 and beyond to charge the cache using a dynamically built SQL statement you’ll be able to achieve it using the same dataflow and simply loop over it using a ForEach loop. Taking the previous data partitioning idea further … a dataflow can contain more than one data path so why not split your data using a conditional split component and, again, charge your lookup caches with only the data that they need for that partition. Lookups have two uses: to (1) find a matching row from the lookup set and (2) put attributes from that matching row into the pipeline. Ask yourself, do you need to do these two things at the same time? After all once you have the key column(s) from your lookup set then you can use that key to get the rest of attributes further downstream, perhaps even in another dataflow. Are you using the same lookup data set multiple times? If so, consider the file caching option in SSIS 2008 and beyond. Above all, experiment and be creative with different combinations. You may be surprised at what works. Final thoughts If you want to know more about how the Lookup component differs in SSIS2008 from SSIS2005 then I have a dedicated blog post about that at Lookup component gets a makeover. I am on a mini-crusade at the moment to get a BULK MERGE feature into the database engine, the thinking being that if the database engine can quickly merge massive amounts of data in a similar manner to how it can insert massive amounts using BULK INSERT then that’s a lot of work that wouldn’t have to be done in the SSIS pipeline. If you think that is a good idea then go and vote for BULK MERGE on Connect. If you have any other tips to share then please stick them in the comments. Hope this helps! @Jamiet Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

Read the article

How to Use An Antivirus Boot Disc or USB Drive to Ensure Your Computer is Clean

- by Chris Hoffman

If your computer is infected with malware, running an antivirus within Windows may not be enough to remove it. If your computer has a rootkit, the malware may be able to hide itself from your antivirus software. This is where bootable antivirus solutions come in. They can clean malware from outside the infected Windows system, so the malware won’t be running and interfering with the clean-up process. The Problem With Cleaning Up Malware From Within Windows Standard antivirus software runs within Windows. If your computer is infected with malware, the antivirus software will have to do battle with the malware. Antivirus software will try to stop the malware and remove it, while the malware will attempt to defend itself and shut down the antivirus. For really nasty malware, your antivirus software may not be able to fully remove it from within Windows. Rootkits, a type of malware that hides itself, can be even trickier. A rootkit could load at boot time before other Windows components and prevent Windows from seeing it, hide its processes from the task manager, and even trick antivirus applications into believing that the rootkit isn’t running. The problem here is that the malware and antivirus are both running on the computer at the same time. The antivirus is attempting to fight the malware on its home turf — the malware can put up a fight. Why You Should Use an Antivirus Boot Disc Antivirus boot discs deal with this by approaching the malware from outside Windows. You boot your computer from a CD or USB drive containing the antivirus and it loads a specialized operating system from the disc. Even if your Windows installation is completely infected with malware, the special operating system won’t have any malware running within it. This means the antivirus program can work on the Windows installation from outside it. The malware won’t be running while the antivirus tries to remove it, so the antivirus can methodically locate and remove the harmful software without it interfering. Any rootkits won’t be able to set up the tricks they use at Windows boot time to hide themselves from the rest o the operating system. The antivirus will be able to see the rootkits and remove them. These tools are often referred to as “rescue disks.” They’re meant to be used when you need to rescue a hopelessly infected system. Bootable Antivirus Options As with any type of antivirus software, you have quite a few options. Many antivirus companies offer bootable antivirus systems based on their antivirus software. These tools are generally free, even when they’re offered by companies that specialized in paid antivirus solutions. Here are a few good options: avast! Rescue Disk – We like avast! for offering a capable free antivirus with good detection rates in independent tests. avast! now offers the ability to create an antivirus boot disc or USB drive. Just navigate to the Tools -> Rescue Disk option in the avast! desktop application to create bootable media. BitDefender Rescue CD – BitDefender always seems to receive good scores in independent tests, and the BitDefender Rescue CD offers the same antivirus engine in the form of a bootable disc. Kaspersky Rescue Disk – Kaspersky also receives good scores in independent tests and offers its own antivirus boot disc. These are just a handful of options. If you prefer another antivirus for some reason — Comodo, Norton, Avira, ESET, or almost any other antivirus product — you’ll probably find that it offers its own system rescue disk. How to Use an Antivirus Boot Disc Using an antivirus boot disc or USB drive is actually pretty simple. You’ll just need to find the antivirus boot disc you want to use and burn it to disc or install it on a USB drive. You can do this part on any computer, so you can create antivirus boot media on a clean computer and then take it to an infected computer. Insert the boot media into the infected computer and then reboot. The computer should boot from the removable media and load the secure antivirus environment. (If it doesn’t, you may need to change the boot order in your BIOS or UEFI firmware.) You can then follow the instructions on your screen to scan your Windows system for malware and remove it. No malware will be running in the background while you do this. Antivirus boot discs are useful because they allow you to detect and clean malware infections from outside an infected operating system. If the operating system is severely infected, it may not be possible to remove — or even detect — all the malware from within it. Image Credit: aussiegall on Flickr

Read the article

Commercial Drupal Modules & Themes

- by Ravish

A discussion at Drupal.org forums prompted me to give my input about commercial ecosystem around Open Source Content Management Systems. WordPress and Joomla have been growing rapidly since past few years. But, growth rate of Drupal seems to be almost flat. Despite being the most powerful CMS around, Drupal is still not being adopted by masses. Many people will argue that Drupal is not targeted towards masses, but developers. I agree, Drupal is more of a development platform than a consumer CMS. Drupal is ‘many things to many people’, and I can build almost any type of website with it. Drupal is being used for building blogs, corporate websites, Intranet portals, social networking and even a project management system. Looking at the wide array of Drupal implementations, it deserves to be the most widely adopted CMS. I believe there are few challenges that Drupal community needs to overcome. To understand these challenges, I surveyed some webmasters who use Joomla or WordPress but not Drupal. I asked them why they don’t want to use Drupal, following are the responses I got from them: Drupal is too complicated, takes time to learn. Drupal is great, but its admin panel is overwhelming. I couldn’t find any nice themes for Drupal. There is no WYSIWYG editor in Drupal. Most Drupal modules do not work out of the box. There aren’t enough modules like Ubercart which provides any out of the box functionality. I tried modules like CCK, Views and Panels. After wasting several hours struggling with them, I decided to give up on Drupal. I don’t use Drupal because of pushbutton and Garland theme. I had hard time trying to customize Garland and it messed up the whole layout. There are no premium modules and themes for Drupal. Joomla has tons of awesome themes and modules. I don’t want a million hacks like CCK, Views, Tokens, Pathauto, ImageCache and CTools just to run a simple website. Most of the complaints from users are related to the learning and development curve involved with Drupal, and the lack of ecosystem. While most of the problems will be gone in Drupal 7, ecosystem is something that needs to be built by the Drupal community. Drupal distributions are a great step forward. There are few awesome Drupal distributions available like Open Publish, Open Atrium and Drupal Commons. I predict, there will be a wave of many powerful Drupal distributions after Drupal 7 release. Many of them will be user-friendly and commercial supported. Following is my post at Drupal.org forums: Quote from: http://drupal.org/node/863776#comment-3313836 Brian Gardner (StudioPress) and Woo Themes launched premium WordPress themes in 2007, the developer community did not accept it at first. Moreover, they were not even GPL licensed. There was an outcry in WordPress community against them. Following that, most premium theme providers switched to GPL licensing. Despite controversies, users voted for premium theme and plugins by buying them. Inspired by their success, hundreds of other developers started to sell premium themes and plugins. It is now the acceptable and in fact most popular business model among WordPress community. Matt Mullenweg once told me, they would not support premium themes. If he supported, developers would no more give out free GPL themes & plugins. He pointed me towards Joomla, there were hardly any nice free themes & modules available. Now two years forward, premium products are not just accepted but embraced by the WordPress community – http://wordpress.org/extend/themes/commercial/ The quality and number of themes & modules has increased, even the free ones. This also helped to boost the adoption and ecosystem of WordPress. Today, state of Drupal is like WordPress was in 2007. There are hardly any out of the box solutions available for Drupal. Ubercart, Open Publish and Open Atrium are the only ones I can think of. Many of the popular Drupal modules are patches and hole-fillers. Thankfully, these hole-filler modules are going to be in Drupal 7 core. Drupal 7 and distributions will spawn a new array of solutions built upon Drupal. Soon, we will have more like Ubercarts and Open Atriums. If commercial solutions can help fuel this ecosystem and growth, Drupal community will accept them eventually. This debate will not stop your customers from buying your product. If your product is awesome, they will vote for you by buying your product.

Read the article

How to Troubleshoot TFS Build Server Failure?

- by Tarun Arora

Ever found your self in this helpless situation where you think you have tried every possible suggestion on the internet to bring the build server back but it just won’t work. Well some times before hunting around for a solution it is important to understand what the problem is, if the error messages in the build logs don’t seem to help you can always enable tracing on the build server to get more information on what could possibly be the root cause of failure. In this blog post today I’ll be showing you how to enable tracing on, - TFS 2010/11 Server - Build Server - Client Enable Tracing on Team Foundation Server 2010/2011 On the Team Foundation Server navigate to C:\Program Files\Microsoft Team Foundation Server 2010\Application Tier\Web Services, right click web.config and from the context menu select edit. Search for the <appSettings> node in the config file and set the value of the key ‘traceWriter’ to true. In the <System.diagnostics> tag set the value of switches from 0 to 4 to set the trace level to maximum to write diagnostics level trace information. Restart the TFS Application pool to force this change to take effect. The application pool restart will impact any one using the TFS server at present. Note - It is recommended that you do not make any changes to the TFS production application server, this can have serious consequences and can even jeopardize the installation of your server. Download the Debug view tool from http://technet.microsoft.com/en-us/sysinternals/bb896647.aspx and set it to capture “Global Events”. Perform any actions in the Team Explorer on the client machine, you should be able to see a series of trace data in the debug view tool now. Enable Tracing on Build Controller/Agents Log on to the Build Controller/Agent and Navigate to the directory C:\Program Files\Microsoft Team Foundation Server 2010\Tools Look for the configuration file ‘TFSBuildServiceHost.exe.config’ if it is not already there create a new text file and rename it to ‘TFSBuildServiceHost.exe.config’ To Enable tracing uncomment the <system.diagnostics> and paste the snippet below if it is not already there. <configuration> <system.diagnostics> <switches> <add name="BuildServiceTraceLevel" value="4"/> </switches> <trace autoflush="true" indentsize="4"> <listeners> <add name="myListener" type="Microsoft.TeamFoundation.TeamFoundationTextWriterTraceListener, Microsoft.TeamFoundation.Common, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" initializeData="c:\logs\TFSBuildServiceHost.exe.log" /> <remove name="Default" /> </listeners> </trace> </system.diagnostics> </configuration> The highlighted path above is where the Log file will be created. If the folder is not already there then create the folder, also, make sure that the account running the build service has access to write to this folder. Restart the build Controller/Agent service from the administration console (or net stop tfsbuildservicehost & net start tfsbuildservicehost) in order for the new setting to be picked up. Enable TFS Tracing on the Client Machine On the client machine, shut down Visual Studio, navigate to C:\Program Files\Microsoft Visual Studio 10.0\Common 7\IDE Search for devenv.exe.config, make a backup copy of the config file and right click the file and from the context menu select edit. If its not already there create this file. Edit devenv.exe.config by adding the below code snippet before the last </configuration> tag <system.diagnostics> <switches> <add name="TeamFoundationSoapProxy" value="4" /> <add name="VersionControl" value="4" /> </switches> <trace autoflush="true" indentsize="3"> <listeners> <add name="myListener" type="Microsoft.TeamFoundation.TeamFoundationTextWriterTraceListener,Microsoft.TeamFoundation.Common, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" initializeData="c:\tf.log" /> <add name="perfListener" type="Microsoft.TeamFoundation.Client.PerfTraceListener, Microsoft.TeamFoundation.Client, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/> </listeners> </trace> </system.diagnostics> The highlighted path above is where the Log file will be created. If the folder is not already there then create the folder. Start Visual Studio and after a bit of activity you should be able to see the new log file being created on the folder specified in the config file. Other Resources Below are some Key resource you might like to review. I would highly recommend the documentation, walkthroughs and videos available on MSDN. Thank you for taking the time out and reading this blog post. If you enjoyed the post, remember to subscribe to http://feeds.feedburner.com/TarunArora. Have you come across an interesting one to one with the build server, please share your experience here. Questions/Feedback/Suggestions, etc please leave a comment. Thank You! Share this post : CodeProject

Read the article

Your thoughts on Best Practices for Scientific Computing?

- by John Smith

A recent paper by Wilson et al (2014) pointed out 24 Best Practices for scientific programming. It's worth to have a look. I would like to hear opinions about these points from experienced programmers in scientific data analysis. Do you think these advices are helpful and practical? Or are they good only in an ideal world? Wilson G, Aruliah DA, Brown CT, Chue Hong NP, Davis M, Guy RT, Haddock SHD, Huff KD, Mitchell IM, Plumbley MD, Waugh B, White EP, Wilson P (2014) Best Practices for Scientific Computing. PLoS Biol 12:e1001745. http://www.plosbiology.org/article/info%3Adoi%2F10.1371%2Fjournal.pbio.1001745 Box 1. Summary of Best Practices Write programs for people, not computers. (a) A program should not require its readers to hold more than a handful of facts in memory at once. (b) Make names consistent, distinctive, and meaningful. (c) Make code style and formatting consistent. Let the computer do the work. (a) Make the computer repeat tasks. (b) Save recent commands in a file for re-use. (c) Use a build tool to automate workflows. Make incremental changes. (a) Work in small steps with frequent feedback and course correction. (b) Use a version control system. (c) Put everything that has been created manually in version control. Don’t repeat yourself (or others). (a) Every piece of data must have a single authoritative representation in the system. (b) Modularize code rather than copying and pasting. (c) Re-use code instead of rewriting it. Plan for mistakes. (a) Add assertions to programs to check their operation. (b) Use an off-the-shelf unit testing library. (c) Turn bugs into test cases. (d) Use a symbolic debugger. Optimize software only after it works correctly. (a) Use a profiler to identify bottlenecks. (b) Write code in the highest-level language possible. Document design and purpose, not mechanics. (a) Document interfaces and reasons, not implementations. (b) Refactor code in preference to explaining how it works. (c) Embed the documentation for a piece of software in that software. Collaborate. (a) Use pre-merge code reviews. (b) Use pair programming when bringing someone new up to speed and when tackling particularly tricky problems. (c) Use an issue tracking tool. I'm relatively new to serious programming for scientific data analysis. When I tried to write code for pilot analyses of some of my data last year, I encountered tremendous amount of bugs both in my code and data. Bugs and errors had been around me all the time, but this time it was somewhat overwhelming. I managed to crunch the numbers at last, but I thought I couldn't put up with this mess any longer. Some actions must be taken. Without a sophisticated guide like the article above, I started to adopt "defensive style" of programming since then. A book titled "The Art of Readable Code" helped me a lot. I deployed meticulous input validations or assertions for every function, renamed a lot of variables and functions for better readability, and extracted many subroutines as reusable functions. Recently, I introduced Git and SourceTree for version control. At the moment, because my co-workers are much more reluctant about these issues, the collaboration practices (8a,b,c) have not been introduced. Actually, as the authors admitted, because all of these practices take some amount of time and effort to introduce, it may be generally hard to persuade your reluctant collaborators to comply them. I think I'm asking your opinions because I still suffer from many bugs despite all my effort on many of these practices. Bug fix may be, or should be, faster than before, but I couldn't really measure the improvement. Moreover, much of my time has been invested on defence, meaning that I haven't actually done much data analysis (offence) these days. Where is the point I should stop at in terms of productivity? I've already deployed: 1a,b,c, 2a, 3a,b,c, 4b,c, 5a,d, 6a,b, 7a,7b I'm about to have a go at: 5b,c Not yet: 2b,c, 4a, 7c, 8a,b,c (I could not really see the advantage of using GNU make (2c) for my purpose. Could anyone tell me how it helps my work with MATLAB?)

Read the article

Surface development: it’s just like software development

- by Dennis Vroegop

Surface is magic. Everyone using it seems to think that way. And I have to be honest, after working for almost 2 years with the platform I still get that special feeling the moment I turn on the unit to do some more work. The whole user experience, the rich environment of the SDK, the touch, even the look and feel of the Surface environment is so much different from the stuff I’ve been working on all my career that I am still bewildered by it. But… and this is a big but.. in the end we’re still talking about a computer and that needs software to become useful. Deep down the magic of the Surface unit there is a PC somewhere, running Windows Vista and the .net framework 3.5. When you write that magic software that makes the platform come alive you’re still working with .net, WPF/XNA, C#, VB.Net and all those other tools and technologies you know so well. Sure, the whole user experience is different from what you’ve known. And the way of thinking about users, their interaction and the positioning of screen elements requires a whole new paradigm. And that takes time. It took me about half a year before I had the feeling I got it nailed down. But when that moment came (about 18 months ago…) I realized that everything I had learned so far on software development still is true when it comes to Surface. The last 6 months I have been working with some people with a different background to start a new company. The idea was that the new company would be focussing on Surface and Surface only. These people come from a marketing background and had some good ideas for some applications. And I have to admit: their ideas were good. Very good. Where it all fell down of course is that these ideas need to be implemented in a piece of software. And creating great software takes skilled developers and a lot of time and money. That’s where things went wrong: the marketing guys didn’t realize and didn’t want to realize that software development is a job that takes skill. You can’t just hire a bunch of developers and expect them to deliver the best sort of software, especially not when it comes to Surface. I tried to explain that yes, their User Interface in Photoshop looked great, but no: I couldn’t develop an application like that in a weeks time. Even worse: the while backend of the software (WCF for communications, SQL Server for the database, etc) would take a lot more time than the frontend. They didn’t understand. It took them a couple of days to drawn the UI in Photoshop so in Blend I should be able to build the software in about the same amount of time. Well, you and I know that it doesn’t work that way. Software is hard to write, and even harder to write well, and it takes skill and dedication. It’s not something you can do as fast as you can draw a mock up for a Surface application in Photohop. The same holds true for web applications of course. A lot of designers there fail to appreciate the hard work that goes into writing the plumbing for a good web app that can handle thousands of users. Although the UI is very important, it’s not all there is to it. And in Surface development this is the same. The UI should create the feeling of magic, but the software behind it is what makes it come alive. And that takes time. A lot of time. So brush of you skills and don’t throw them away if you start developing for Surface. Because projects (and colaborations) can fail there as hard as they can in any other area of software development. On a side note: we decided to stop the colaboration (something the other parties involved didn’t appreciate and were very angry about) and decided to hire a designer for the Surface projects. The focus is back where it belongs: on the software development we know so well and have been doing very well for 13 years. UI is just a part of the whole project and not the end product. So my company Detrio is still going strong when it comes to develivering Surface solutions but once again from a technological background, not a marketing background.

Read the article

Multitask Like a Pro with AquaSnap

- by Matthew Guay

Are you tired of shuffling back and forth between windows? Here’s a handy app that can help you keep all of your windows organized and accessible. AquaSnap is a great free utility that helps you use multiple windows at the same time easily and efficiently. One of Windows 7’s greatest new features is Aero Snap, which lets you easily view windows side by side by simply dragging windows to side of your screen. After using Windows 7 for the past year, Aero Snap is one of the features we really miss when using older versions of Windows. With AquaSnap, you now have all of the features of Aero Snap and more in Windows 2000, XP, Vista, and of course Windows 7. Not only does it give you Aero Snap features, but AquaSnap also gives you more control over your windows to make you more productive. Getting Started AquaSnap is a a free download for Windows 2000, XP, Vista, and 7. Download the small installer (link below) and install it with the default settings. AquaSnap automatically runs as soon as it is installed, and you will notice a new icon in your system tray. Now you can go ahead and put it to use. Drag a window to any edge or corner of your desktop, and you will see an icon showing what part of the screen the window will cover. Dragging it to the side of the screen expanded the window to fill the right half of the screen, just like the default Aero Snap in Windows 7. You can drag the window away to restore it to its former size. AquaSnap works on any corner of the screen too, so you can have 4 windows side-by-side. We already have 3 windows snapped to the corners, and notice that we’re dragging a fourth window to the bottom right corner. You can also snap windows to the bottom and top of the screen. Here we have Word snapped to the bottom half of the screen, and we’re dragging Chrome to the top. You can even snap internal windows in Multiple Document Interface (MDI) programs such as Excel. Here we are snapping a workbook in Excel to the left to view 2 workbooks side-by-side. Additionally, AquaSnap lets you keep any window always on top. Simply shake any window, and it will turn semi-transparent and stay on top of all other windows. Notice the transparent calculator here on top of Excel. All of AquaSnap’s features work great in Windows 2000, XP, and Vista too. Here we are snapping IE6 to the left of the screen in XP. Here are 3 windows snapped to the sides in XP. You can mix the snap modes, and have, for instance, two windows on the right side and one window on the left. This is a great way to maximize productivity if you need more space in one of the windows. Even AquaShake works to keep a window transparent and on top in XP. Settings AquaSnap has a detailed settings dialog where you can tweak it to work exactly like you want. Simply right-click on its icon in the taskbar, and select Settings. From the first screen, you can choose if you want AquaSnap to start with Windows, and if you want it to show an icon in the system tray. If you turn off the system tray icon, you can access the AquaSnap settings from Start > All Programs > AquaSnap > Configuration (or simply search for Configuration in Vista or Windows 7). The second tab in settings lets you choose what you want each snapping region to do. You can also choose two other presets, including AeroSnap (which works just like the default Aero Snap in Windows 7) and AquaSnap simple (which only snaps at the edges of the screen, not the corners). The third tab lets you increase or decrease the opacity of pinned windows when using AquaShake, and also lets you increase or decrease the shaking sensitivity. Additionally, if you prefer the standard AeroShake functionality, which minimizes all other open windows when you shake a window, you can choose that too. The fourth tab lets you activate an optional feature, AquaGlass. If you activate this, it will make windows turn transparent when you drag them across the screen. Finally, the last tab lets you change the color and opacity of the preview rectangle, or simply turn it off. Or, if you want to temporarily turn AquaSnap off, simply right-click on its icon and select Off. In Windows 7, turning off AquaSnap will restore your standard Windows Aero Snap functionality, and in other version of Windows it will stop letting you snap windows at all. You can then repeat the steps and select On when you want to use AquaSnap again. Conclusion AquaSnap is a handy tool to make you more productive at your computer. With a wide variety of useful features, there’s something here for everyone. Download AquaSnap Similar Articles Productive Geek Tips How to Get Virtual Desktops on Windows XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Out of band Security Update for Internet Explorer 7 Cool Looking Screensavers for Windows SyncToy syncs Files and Folders across Computers on a Network (or partitions on the same drive) If it were only this easy Classic Cinema Online offers 100’s of OnDemand Movies OutSync will Sync Photos of your Friends on Facebook and Outlook

Read the article

Last week I was presented with a Microsoft MVP award in Virtual Machines – time to thank all who hel

- by Liam Westley

MVP in Virtual Machines Last week, on 1st April, I received an e-mail from Microsoft letting me know that I had been presented with a 2010 Microsoft® MVP Award for outstanding contributions in Virtual Machine technical communities during the past year. It was an honour to be nominated, and is a great reflection on the vibrancy of the UK user group community which made this possible. Virtualisation for developers, not just IT Pros I consider it a special honour as my expertise in virtualisation is as a software developer utilising virtual machines to aid my software development, rather than an IT Pro who manages data centre and network infrastructure. I’ve been on a minor mission over the past few years to enthuse developers in a topic usually seen as only for network admins, but which can make their life a whole lot easier once understood properly. Continuous learning is fun In 1676, the scientist Isaac Newton, in a letter to Robert Hooke used the phrase (http://www.phrases.org.uk/meanings/268025.html) ‘If I have seen a little further it is by standing on the shoulders of Giants’ I’m a nuclear physicist by education, so I am more than comfortable that any knowledge I have is based on the work of others. Although far from a science, software development and IT is equally built upon the work of others. It’s one of the reasons I despise software patents. So in that sense this MVP award is a result of all the great minds that have provided virtualisation solutions for me to talk about. I hope that I have always acknowledged those whose work I have used when blogging or giving presentations, and that I have executed my responsibility to share any knowledge gained as widely as possible. Thanks to all those who helped – a big thanks to the UK user group community I reckon this journey started in 2003 when I started attending a user group called the London .Net Users Group (http://www.dnug.org.uk) started by a nice chap called Ian Cooper. The great thing about Ian was that he always encouraged non professional speakers to take the stage at the user group, and my first ever presentation was on 30th September 2003; SQL Server CE 2.0 and the.NET Compact Framework. In 2005 Ian Cooper was on the committee for the first DeveloperDeveloperDeveloper! day, the free community conference held at Microsoft’s UK HQ in Thames Valley park in Reading. He encouraged me to take part and so on 14th May 2005 I presented a talk previously given to the London .Net User Group on Simplifying access to multiple DB providers in .NET. From that point on I definitely had the bug; presenting at DDD2, DDD3, groking at DDD4 and SQLBits I and after a break, DDD7, DDD Scotland and DDD8. What definitely made me keen was the encouragement and infectious enthusiasm of some of the other DDD organisers; Craig Murphy, Barry Dorrans, Phil Winstanley and Colin Mackay. During the first few DDD events I met the Dave McMahon and Richard Costall from NxtGenUG who made it easy to start presenting at their user groups. Along the way I’ve met a load of great user group organisers; Guy Smith-Ferrier of the .Net Developer Network, Jimmy Skowronski of GL.Net and the double act of Ray Booysen and Gavin Osborn behind what was Vista Squad and is now Edge UG. Final thanks to those who suggested virtualisation as a topic ... Final thanks have to go the people who inspired me to create my Virtualisation for Developers talk. Toby Henderson (@holytshirt) ensured I took notice of Sun’s VirtualBox, Peter Ibbotson for being a fine sounding board at the Kew Railway over quite a few Adnam’s Broadside and to Guy Smith-Ferrier for allowing his user group to be the guinea pigs for the talk before it was seen at DDD7. Thanks to all of you I now know much more about virtualisation than I would have thought possible and it continues to be great fun. Conclusion If this was an academy award acceptance speech I would have been cut off after the first few paragraphs, so well done if you made it this far. I’ll be doing my best to do justice to the MVP award and the UK community. I’m fortunate in having a new employer who considers presenting at user groups as a good thing, so don’t expect me to stop any time soon. If you’ve never seen me in action, then you can view the original DDD7 Virtualisation for Developers presentation (filmed by the Microsoft Channel 9 team) as part of the full DDD7 video list here, http://www.craigmurphy.com/blog/?p=1591. Also thanks to Craig Murphy’s fine video work you can also view my latest DDD8 presentation on Commercial Software Development, here, http://vimeo.com/9216563 P.S. If I’ve missed anyone out, do feel free to lambast me in comments, it’s your duty.

Read the article

How to Sync Specific Folders With Dropbox

- by Matthew Guay

Would you like to sync specific folders with Dropbox instead of automatically syncing all of your folders to all of your computers? Here’s how using Selective Sync available in the latest Beta version of Dropbox. Dropbox is a great tool for keeping your important files synced between your computers, and we have covered many interesting things you can do with your Dropbox account. But until now, there was no way to only sync certain folders with each computer; it was all or nothing. This could be frustrating if you wanted to store large files from one computer but didn’t want them on a computer with a smaller hard drive. The latest Beta version of Dropbox allows you to selectively choose which folders to sync between computers. Please Note: This feature is currently only available in the 0.8 beta version of Dropbox. Setup the new Beta Download the new beta version of Dropbox 0.8 (link below); choose the correct download for your system. Run the installer as normal. It only took a couple seconds to install, though it made the taskbar disappear briefly at the end of the installation on our tests. Strangely, the installer doesn’t let you know it’s finished installing; if you already had a previous version of Dropbox installed, it will simply start working from your system tray as before. If this is a new installation of Dropbox, you will be asked to enter your Dropbox account info or create a new account. Selectively Sync Folders By default, Dropbox will still sync all of your Dropbox folders to all of your computers. Once this beta is installed, you can choose individual folders or subfolders you don’t want to sync. Right-click the Dropbox icon in your system tray and select Preferences. Click the Advanced tab on the top, and then click the new Selective Sync button. Now uncheck any folders you don’t want to sync to this computer. These folders will still exist on your other machines and in the Dropbox web interface, but they will not be downloaded to this computer. The default view only shows your top-level folders in your Dropbox account. If you wish to sync certain folders but exclude their subfolders, click the Switch to Advanced View button. Expand any folder and uncheck any subfolders you don’t want to sync. Notice that the parent folder’s check box is filled now, showing that it is partially synced. Click OK when you’ve made the changes you want. Dropbox will then make sure you know these folders will stop syncing to this computer; click OK again if you’re sure you don’t want to sync these folders. Dropbox will cleanup your folder and remove the files and folders you don’t want synced. Next time you open your Dropbox folder, you’ll notice that the folders we unchecked are no longer in this computer’s Dropbox folder. They are still in our Dropbox online account, and on any other computers we’re syncing with. If you add a new folder with the same name as a folder you stopped syncing, you’ll notice a grey minus icon over the folder. This folder will not sync with your other computers or your online Dropbox account. If you want to add these folders back to this computer’s Dropbox, just repeat the steps, this time checking the folders you want to sync. If you have any folders that were not syncing before, their names will have (Selective Sync Conflict) added to the end, and will sync with all of your computers. Conclusion We’re excited that we can now choose exactly which folders we want synced on each computer. Since everything is still synced with the online Dropbox, we can still access any of the folders from anywhere. This makes your Dropbox much more versatile, and can help you keep the folders synced exactly the way you want. Links Download the new Dropbox 0.8.64 beta Signup for Dropbox Similar Articles Productive Geek Tips Add "My Dropbox" to Your Windows 7 Start MenuSync Your Pidgin Profile Across Multiple PCs with DropboxUser Guide to Dropbox Shared FoldersUse Any Folder For Your Ubuntu Desktop (Even a Dropbox Folder)Shut Down or Reboot a Solaris System TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor tinysong gives a shortened URL for you to post on Twitter (or anywhere)

Read the article

Protecting offline IRM rights and the error "Unable to Connect to Offline database"

- by Simon Thorpe

One of the most common problems I get asked about Oracle IRM is in relation to the error message "Unable to Connect to Offline database". This error message is a result of how Oracle IRM is protecting the cached rights on the local machine and if that cache has become invalid in anyway, this error is thrown. Offline rights and security First we need to understand how Oracle IRM handles offline use. The way it is implemented is one of the main reasons why Oracle IRM is the leading document security solution and demonstrates our methodology to ensure that solutions address both security and usability and puts the balance of these two in your control. Each classification has a set of predefined roles that the manager of the classification can assign to users. Each role has an offline period which determines the amount of time a user can access content without having to communicate with the IRM server. By default for the context model, which is the classification system that ships out of the box with Oracle IRM, the offline period for each role is 3 days. This is easily changed however and can be as low as under an hour to as long as years. It is also possible to switch off the ability to access content offline which can be useful when content is very sensitive and requires a tight leash. So when a user is online, transparently in the background, the Oracle IRM Desktop communicates with the server and updates the users rights and offline periods. This transparent synchronization period is determined by the server and communicated to all IRM Desktops and allows for users rights to be kept up to date without their intervention. This allows us to support some very important scenarios which are key to a successful IRM solution. A user doesn't have to make any decision when going offline, they simply unplug their laptop and they already have their offline periods synchronized to the maximum values. Any solution that requires a user to make a decision at the point of going offline isn't going to work because people forget to do this and will therefore be unable to legitimately access their content offline. If your rights change to REMOVE your access to content, this also happens in the background. This is very useful when someone has an offline duration of a week and they happen to make a connection to the internet 3 days into that offline period, the Oracle IRM Desktop detects this online state and automatically updates all rights for the user. This means the business risk is reduced when setting long offline periods, because of the daily transparent sync, you can reflect changes as soon as the user is online. Of course, if they choose not to come online at all during that week offline period, you cannot effect change, but you take that risk in giving the 7 day offline period in the first place. If you are added to a NEW classification during the day, this will automatically be synchronized without the user even having to open a piece of content secured against that classification. This is very important, consider the scenario where a senior executive downloads all their email but doesn't open any of it. Disconnects the laptop and then gets on a plane. During the flight they attempt to open a document attached to a downloaded email which has been secured against an IRM classification the user was not even aware they had access to. Because their new role in this classification was automatically synchronized their experience is a good one and the document opens. More information on how the Oracle IRM classification model works can be found in this article by Martin Abrahams. So what about problems accessing the offline rights database? So onto the core issue... when these rights are cached to your machine they are stored in an encrypted database. The encryption of this offline database is keyed to the instance of the installation of the IRM Desktop and the Windows user account. Why? Well what you do not want to happen is for someone to get their rights for content and then copy these files across hundreds of other machines, therefore getting access to sensitive content across many environments. The IRM server has a setting which controls how many times you can cache these rights on unique machines. This is because people typically access IRM content on more than one computer. Their work desktop, a laptop and often a home computer. So Oracle IRM allows for the usability of caching rights on more than one computer whilst retaining strong security over this cache. So what happens if these files are corrupted in someway? That's when you will see the error, Unable to Connect to Offline database. The most common instance of seeing this is when you are using virtual machines and copy them from one computer to the next. The virtual machine software, VMWare Workstation for example, makes changes to the unique information of that virtual machine and as such invalidates the offline database. How do you solve the problem? Resolution is however simple. You just delete all of the offline database files on the machine and they will be recreated with working encryption when the Oracle IRM Desktop next starts. However this does mean that the IRM server will think you have your rights cached to more than one computer and you will need to rerequest your rights, even though you are only going to be accessing them on one. Because it still thinks the old cache is valid. So be aware, it is good practice to increase the server limit from the default of 1 to say 3 or 4. This is done using the Enterprise Manager instance of IRM. So to delete these offline files I have a simple .bat file you can use; Download DeleteOfflineDBs.bat Note that this uses pskillto stop the irmBackground.exe from running. This is part of the IRM Desktop and holds open a lock to the offline database. Either kill this from task manager or use pskillas part of the script.

Read the article

Big Data – Is Big Data Relevant to me? – Big Data Questionnaires – Guest Post by Vinod Kumar

- by Pinal Dave

This guest post is by Vinod Kumar. Vinod Kumar has worked with SQL Server extensively since joining the industry over a decade ago. Working on various versions of SQL Server 7.0, Oracle 7.3 and other database technologies – he now works with the Microsoft Technology Center (MTC) as a Technology Architect. Let us read the blog post in Vinod’s own voice. I think the series from Pinal is a good one for anyone planning to start on Big Data journey from the basics. In my daily customer interactions this buzz of “Big Data” always comes up, I react generally saying – “Sir, do you really have a ‘Big Data’ problem or do you have a big Data problem?” Generally, there is a silence in the air when I ask this question. Data is everywhere in organizations – be it big data, small data, all data and for few it is bad data which is same as no data :). Wow, don’t discount me as someone who opposes “Big Data”, I am a big supporter as much as I am a critic of the abuse of this term by the people. In this post, I wanted to let my mind flow so that you can also think in the direction I want you to see these concepts. In any case, this is not an exhaustive dump of what is in my mind – but you will surely get the drift how I am going to question Big Data terms from customers!!! Is Big Data Relevant to me? Many of my customers talk to me like blank whiteboard with no idea – “why Big Data”. They want to jump into the bandwagon of technology and they want to decipher insights from their unexplored data a.k.a. unstructured data with structured data. So what are these industry scenario’s that come to mind? Here are some of them: Financials Fraud detection: Banks and Credit cards are monitoring your spending habits on real-time basis. Customer Segmentation: applies in every industry from Banking to Retail to Aviation to Utility and others where they deal with end customer who consume their products and services. Customer Sentiment Analysis: Responding to negative brand perception on social or amplify the positive perception. Sales and Marketing Campaign: Understand the impact and get closer to customer delight. Call Center Analysis: attempt to take unstructured voice recordings and analyze them for content and sentiment. Medical Reduce Re-admissions: How to build a proactive follow-up engagements with patients. Patient Monitoring: How to track Inpatient, Out-Patient, Emergency Visits, Intensive Care Units etc. Preventive Care: Disease identification and Risk stratification is a very crucial business function for medical. Claims fraud detection: There is no precise dollars that one can put here, but this is a big thing for the medical field. Retail Customer Sentiment Analysis, Customer Care Centers, Campaign Management. Supply Chain Analysis: Every sensors and RFID data can be tracked for warehouse space optimization. Location based marketing: Based on where a check-in happens retail stores can be optimize their marketing. Telecom Price optimization and Plans, Finding Customer churn, Customer loyalty programs Call Detail Record (CDR) Analysis, Network optimizations, User Location analysis Customer Behavior Analysis Insurance Fraud Detection & Analysis, Pricing based on customer Sentiment Analysis, Loyalty Management Agents Analysis, Customer Value Management This list can go on to other areas like Utility, Manufacturing, Travel, ITES etc. So as you can see, there are obviously interesting use cases for each of these industry verticals. These are just representative list. Where to start? A lot of times I try to quiz customers on a number of dimensions before starting a Big Data conversation. Are you getting the data you need the way you want it and in a timely manner? Can you get in and analyze the data you need? How quickly is IT to respond to your BI Requests? How easily can you get at the data that you need to run your business/department/project? How are you currently measuring your business? Can you get the data you need to react WITHIN THE QUARTER to impact behaviors to meet your numbers or is it always “rear-view mirror?” How are you measuring: The Brand Customer Sentiment Your Competition Your Pricing Your performance Supply Chain Efficiencies Predictive product / service positioning What are your key challenges of driving collaboration across your global business? What the challenges in innovation? What challenges are you facing in getting more information out of your data? Note: Garbage-in is Garbage-out. Hold good for all reporting / analytics requirements Big Data POCs? A number of customers get into the realm of setting a small team to work on Big Data – well it is a great start from an understanding point of view, but I tend to ask a number of other questions to such customers. Some of these common questions are: To what degree is your advanced analytics (natural language processing, sentiment analysis, predictive analytics and classification) paired with your Big Data’s efforts? Do you have dedicated resources exploring the possibilities of advanced analytics in Big Data for your business line? Do you plan to employ machine learning technology while doing Advanced Analytics? How is Social Media being monitored in your organization? What is your ability to scale in terms of storage and processing power? Do you have a system in place to sort incoming data in near real time by potential value, data quality, and use frequency? Do you use event-driven architecture to manage incoming data? Do you have specialized data services that can accommodate different formats, security, and the management requirements of multiple data sources? Is your organization currently using or considering in-memory analytics? To what degree are you able to correlate data from your Big Data infrastructure with that from your enterprise data warehouse? Have you extended the role of Data Stewards to include ownership of big data components? Do you prioritize data quality based on the source system (that is Facebook/Twitter data has lower quality thresholds than radio frequency identification (RFID) for a tracking system)? Do your retention policies consider the different legal responsibilities for storing Big Data for a specific amount of time? Do Data Scientists work in close collaboration with Data Stewards to ensure data quality? How is access to attributes of Big Data being given out in the organization? Are roles related to Big Data (Advanced Analyst, Data Scientist) clearly defined? How involved is risk management in the Big Data governance process? Is there a set of documented policies regarding Big Data governance? Is there an enforcement mechanism or approach to ensure that policies are followed? Who is the key sponsor for your Big Data governance program? (The CIO is best) Do you have defined policies surrounding the use of social media data for potential employees and customers, as well as the use of customer Geo-location data? How accessible are complex analytic routines to your user base? What is the level of involvement with outside vendors and third parties in regard to the planning and execution of Big Data projects? What programming technologies are utilized by your data warehouse/BI staff when working with Big Data? These are some of the important questions I ask each customer who is actively evaluating Big Data trends for their organizations. These questions give you a sense of direction where to start, what to use, how to secure, how to analyze and more. Sign off Any Big data is analysis is incomplete without a compelling story. The best way to understand this is to watch Hans Rosling – Gapminder (2:17 to 6:06) videos about the third world myths. Don’t get overwhelmed with the Big Data buzz word, the destination to what your data speaks is important. In this blog post, we did not particularly look at any Big Data technologies. This is a set of questionnaire one needs to keep in mind as they embark their journey of Big Data. I did write some of the basics in my blog: Big Data – Big Hype yet Big Opportunity. Do let me know if these questions make sense? Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

Read the article

Installing SharePoint 2013 on Windows 2012- standalone installation

- by sreejukg

In this article, I am going to share my experience while installing SharePoint 2013 on Windows 2012. This was the first time I tried SharePoint 2013. So I thought sharing the same will benefit somebody who would like to install SharePoint 2013 as a standalone installation. Standalone installation is meant for evaluation/development purposes. For production environments, you need to follow the best practices and create required service accounts. Microsoft has published the deployment guide for SharePoint 2013, you can download this from the below link. http://www.microsoft.com/en-us/download/details.aspx?id=30384 Since this is for development environment, I am not going to create any service account, I logged in to Windows 2012 as an administrator and just placed my installation DVD on the drive. When I run the setup from the DVD, the below splash screen appears. This reflects the new UI changes happening with all Microsoft based applications; the interface matches the metro style applications (Windows 8 style). As you can see the options are same as that of the SharePoint 2010 installation screen. Click on the “install software prerequisites” link to get all the prerequisites get installed. You need a valid internet connection to do this. Clicking on the install software prerequisites will bring the following dialog. Click Next, you will see the terms and conditions. Select I accept check box and click Next. The installation will start immediately. For any reason, if you stop the installation and start it later, the product preparation tool will check whether a particular component is installed and if yes, then the installation of that particular component will be skipped. If you do not have internet connection, you will face the download error as follows. At any point of failure, the error log will be available for you to review. If all OK, you will reach the below dialog, this means some components will be installed once the PC is rebooted. Be noted that the clicking on finish will not ask you for further confirmation. So make sure to save all your work before clicking on finish button. Once the server is restarted, the product preparation tool will start automatically and you will see the following dialog. Now go to the SharePoint 2013 splash page and click on “Install SharePoint Server” link. You need to enter the product key here. Enter the product key as you received and click continue. Select the Checkbox for the license agreement and click on continue button. Now you need to select the installation type. Select Stand-alone and click on “Install Now” button. A dialog will pop up that updates you with the process and progress. The installation took around 15-20 minutes with 2 GB or Ram installed in the server, seems fair. Once the installation is over, you will see the following Dialog. Make sure you select the Run the products and configuration wizard. If you miss to select the check box, you can find the products and configuration wizard from the start tiles. The products and configuration wizard will start. If you get any dialog saying some of the services will be stopped, you just accept it. Since we selected standalone installation, it will not ask for any user input, as it already knows the database to be configured. Once the configuration is over without any problems you will see the configuration successful message. Also you can find the link to central administration on the Start Screen. Troubleshooting During my first setup process, I got the below error. System.ArgumentException: The SDDL string contains an invalid sid or a sid that cannot be translated. Parameter name: sddlForm at System.Security.AccessControl.RawSecurityDescriptor.BinaryFormFromSddlForm(String sddlForm) at System.Security.AccessControl.RawSecurityDescriptor..ctor(String sddlForm) at Microsoft.SharePoint.Win32.SPNetApi32.CreateShareSecurityDescriptor(String[] readNames, String[] changeNames, String[] fullControlNames, String& sddl) at Microsoft.SharePoint.Win32.SPNetApi32.CreateFileShare(String name, String description, String path) at Microsoft.SharePoint.Administration.SPServer.CreateFileShare(String name, String description, String path) at Microsoft.Office.Server.Search.Administration.AnalyticsAdministration.CreateAnalyticsUNCShare(String dirParentLocation, String shareName) at Microsoft.Office.Server.Search.Administration.AnalyticsAdministration.ProvisionAnalyticsShare(SearchServiceApplication serviceApplication) ………………………………………… ………………………………………… The configuration wizard displayed the error as below. The error occurred in step 8 of the configuration wizard and by the time the central administration is already provisioned. So from the start, I was able to open the central administration website, but the search service application was showing as error. I found a good blog that specifies the reason for error. http://kbdump.com/sharepoint2013-standalone-config-error-create-sample-data/ The workaround specified in the blog works fine. I think SharePoint must be provisioning Search using the Network Service account, so instead of giving permission to everyone, you could try giving permission to Network Service account(I didn’t try this yet, buy you could try and post your feedback here). In production environment you will have specific accounts that have access rights as recommended by Microsoft guidelines. Installation of SharePoint 2013 is pretty straight forward. Hope you enjoyed the article!

Read the article

RSS feeds in Orchard

- by Bertrand Le Roy

When we added RSS to Orchard, we wanted to make it easy for any module to expose any contents as a feed. We also wanted the rendering of the feed to be handled by Orchard in order to minimize the amount of work from the module developer. A typical example of such feed exposition is of course blog feeds. We have an IFeedManager interface for which you can get the built-in implementation through dependency injection. Look at the BlogController constructor for an example: public BlogController( IOrchardServices services, IBlogService blogService, IBlogSlugConstraint blogSlugConstraint, IFeedManager feedManager, RouteCollection routeCollection) { If you look a little further in that same controller, in the Item action, you’ll see a call to the Register method of the feed manager: _feedManager.Register(blog); This in reality is a call into an extension method that is specialized for blogs, but we could have made the two calls to the actual generic Register directly in the action instead, that is just an implementation detail: feedManager.Register(blog.Name, "rss", new RouteValueDictionary { { "containerid", blog.Id } }); feedManager.Register(blog.Name + " - Comments", "rss", new RouteValueDictionary { { "commentedoncontainer", blog.Id } }); What those two effective calls are doing is to register two feeds: one for the blog itself and one for the comments on the blog. For each call, the name of the feed is provided, then we have the type of feed (“rss”) and some values to be injected into the generic RSS route that will be used later to route the feed to the right providers. This is all you have to do to expose a new feed. If you’re only interested in exposing feeds, you can stop right there. If on the other hand you want to know what happens after that under the hood, carry on. What happens after that is that the feedmanager will take care of formatting the link tag for the feed (see FeedManager.GetRegisteredLinks). The GetRegisteredLinks method itself will be called from a specialized filter, FeedFilter. FeedFilter is an MVC filter and the event we’re interested in hooking into is OnResultExecuting, which happens after the controller action has returned an ActionResult and just before MVC executes that action result. In other words, our feed registration has already been called but the view is not yet rendered. Here’s the code for OnResultExecuting: model.Zones.AddAction("head:after", html => html.ViewContext.Writer.Write( _feedManager.GetRegisteredLinks(html))); This is another piece of code whose execution is differed. It is saying that whenever comes time to render the “head” zone, this code should be called right after. The code itself is rendering the link tags. As a result of all that, here’s what can be found in an Orchard blog’s head section: <link rel="alternate" type="application/rss+xml" title="Tales from the Evil Empire" href="/rss?containerid=5" /> <link rel="alternate" type="application/rss+xml" title="Tales from the Evil Empire - Comments" href="/rss?commentedoncontainer=5" /> The generic action that these two feeds point to is Index on FeedController. That controller has three important dependencies: an IFeedBuilderProvider, an IFeedQueryProvider and an IFeedItemProvider. Different implementations of these interfaces can provide different formats of feeds, such as RSS and Atom. The Match method enables each of the competing providers to provide a priority for themselves based on arbitrary criteria that can be found on the FeedContext. This means that a provider can be selected based not only on the desired format, but also on the nature of the objects being exposed as a feed or on something even more arbitrary such as the destination device (you could imagine for example giving shorter text only excerpts of posts on mobile devices, and full HTML on desktop). The key here is extensibility and dynamic competition and collaboration from unknown and loosely coupled parts. You’ll find this pattern pretty much everywhere in the Orchard architecture. The RssFeedBuilder implementation of IFeedBuilderProvider is also a regular controller with a Process action that builds a RssResult, which is itself a thin ActionResult wrapper around an XDocument. Let’s get back to the FeedController’s Index action. After having called into each known feed builder to get its priority on the currently requested feed, it will select the one with the highest priority. The next thing it needs to do is to actually fetch the data for the feed. This again is a collaborative effort from a priori unknown providers, the implementations of IFeedQueryProvider. There are several implementations by default in Orchard, the choice of which is again done through a Match method. ContainerFeedQuery for example chimes in when a “containerid” parameter is found in the context (see URL in the link tag above): public FeedQueryMatch Match(FeedContext context) { var containerIdValue = context.ValueProvider.GetValue("containerid"); if (containerIdValue == null) return null; return new FeedQueryMatch { FeedQuery = this, Priority = -5 }; } The actual work is done in the Execute method, which finds the right container content item in the Orchard database and adds elements for each of them. In other words, the feed query provider knows how to retrieve the list of content items to add to the feed. The last step is to translate each of the content items into feed entries, which is done by implementations of IFeedItemBuilder. There is no Match method this time. Instead, all providers are called with the collection of items (or more accurately with the FeedContext, but this contains the list of items, which is what’s relevant in most cases). Each provider can then choose to pick those items that it knows how to treat and transform them into the format requested. This enables the construction of heterogeneous feeds that expose content items of various types into a single feed. That will be extremely important when you’ll want to expose a single feed for all your site. So here are feeds in Orchard in a nutshell. The main point here is that there is a fair number of components involved, with some complexity in implementation in order to allow for extreme flexibility, but the part that you use to expose a new feed is extremely simple and light: declare that you want your content exposed as a feed and you’re done. There are cases where you’ll have to dive in and provide new implementations for some or all of the interfaces involved, but that requirement will only arise as needed. For example, you might need to create a new feed item builder to include your custom content type but that effort will be extremely focused on the specialized task at hand. The rest of the system won’t need to change. So what do you think?

Read the article

Training on Demand Certification Packages for DBAs

- by Antoinette O'Sullivan

The demand for Database Administrators continues to grow.*Almost two-thirds of IT hiring managers indicate that they highly value certifications in validatingIT skills and expertise.** * Job satisfaction and DBA work growth rate: CNN Money's 2011 Best Jobs in America survey.** Survey among nearly 1,700 respondents by CompTIA, the nonprofit trade association for the IT industry, cited in Certification Magazine, Feb. 14 th., 2012. Get Certified with Training on DemandAre you an experienced Database professional eager to achieve certification?Is time your most precious resource?Then try our new Training On Demand Certification Value Package with 20% discount. These all-in-one packages give you everything you need to get certified with success: Why Training On Demand: Expert training from Oracle’s top instructors Sophisticated streaming video recording Available for 90 days, 24 hours a day, 7 days a week White boarding and training labs for hands-on experience Start, stop, pause, jump or rewind sections of the course as needed Oracle University instructor Q&A A full-text search leads to the right video fragment in a matter of seconds. Watch this demo to see how it works. Additional Certification resources: Benefits of Oracle Certification Database Certification Paths Available Database Certification Exams Getting certified has never been easier!For assistance contact your local Oracle University Service Desk. Many organizations deploy both Oracle Database and MySQL side by side to serve different needs, and as a database professional you can find training courses on both topics at Oracle University! Check out the upcoming Oracle Database 11g training courses and MySQL training courses. Even if you're only managing Oracle Databases at this point of time, getting familiar with MySQL Database will broaden your career path with growing job demand. These Value Packages are also available with the following training formats: In-Class, Live Virtual Class and Self Study: MySQL Database Administration Value Packages Your Savings plus get a FREE Retake save 5% save 20% save 20% save 20% In Class Edition Live Virtual Class Edition Self-Study Edition Training On Demand MySQL Database Administrator Certification Value Package View Package View Package View Package View Package MySQL Developer Value Packages Your Savings plus get a FREE Retake save 5% save 20% save 20% save 20% In Class Edition Live Virtual Class Edition Self-Study Edition Training On Demand MySQL Developer Certification Value Package View Package View Package Oracle Database 10g Value Packages Your Savings plus get a FREE Retake save 5% save 20% save 20% save 20% In Class Edition Live Virtual Class Edition Self-Study Edition Training On Demand Oracle Database 10g Administrator Certified Associate Certification Value Package View Package View Package View Package Oracle Database 10g Administrator Certified Professional Certification Value Package View Package View Package View Package Oracle Database 11g Value Packages Your Savings plus get a FREE Retake save 5% save 20% save 20% save 20% In Class Edition Live Virtual Class Edition Self-Study Edition Training On Demand Oracle Database 11g Administrator Certified Associate Certification Value Package View Package View Package View Package View Package Oracle Database 11g Administrator Certified Professional Certification Value Package View Package View Package View Package View Package Exam Prep Seminar Value Package: Oracle Database Admin 1 View Package Oracle Database 11g Administrator Certified Professional UPGRADE Certification Value Package View Package Oracle Real Application Clusters 11g and Grid Infrastructure Administraton Certified Expert Certification Value Package View Package Exam Prep Seminar Value Package: Oracle Database Admin 2 View Package Exam Prep Seminar Value Package: Oracle RAC 11g and Grid Infrastructure Administration View Package Exam Prep Seminar Value Package: Upgrade Oracle Certified Professional (OCP) to Oracle Database 11g View Package SQL and PL/SQL Value Packages Your Savings plus get a FREE Retake save 5% save 20% save 20% save 20% In Class Edition Live Virtual Class Edition Self-Study Edition Training On Demand Oracle Database Sql Expert Certification Value Package View Package View Package View Package View Package Exam Prep Seminar Value Package: Oracle Database SQL View Package View our Certification Value Packages Mention this code at the time of booking: E1245 Connect For a full list of MySQL Training courses and events, go to http://oracle.com/education/mysql.

Read the article

EM12c Release 4: New EMCLI Verbs

- by SubinDaniVarughese

Here are the new EM CLI verbs in Enterprise Manager 12c Release 4 (12.1.0.4). This helps you in writing new scripts or enhancing your existing scripts for further automation. Basic Administration Verbs invoke_ws - Invoke EM web service.ADM Verbs associate_target_to_adm - Associate a target to an application data model. export_adm - Export Application Data Model to a specified .xml file. import_adm - Import Application Data Model from a specified .xml file. list_adms - List the names, target names and application suites of existing Application Data Models verify_adm - Submit an application data model verify job for the target specified.Agent Update Verbs get_agent_update_status - Show Agent Update Results get_not_updatable_agents - Shows Not Updatable Agents get_updatable_agents - Show Updatable Agents update_agents - Performs Agent Update Prereqs and submits Agent Update JobBI Publisher Reports Verbs grant_bipublisher_roles - Grants access to the BI Publisher catalog and features. revoke_bipublisher_roles - Revokes access to the BI Publisher catalog and features.Blackout Verbs create_rbk - Create a Retro-active blackout.CFW Verbs cancel_cloud_service_requests - To cancel cloud service requests delete_cloud_service_instances - To delete cloud service instances delete_cloud_user_objects - To delete cloud user objects. get_cloud_service_instances - To get information about cloud service instances get_cloud_service_requests - To get information about cloud requests get_cloud_user_objects - To get information about cloud user objects.Chargeback Verbs add_chargeback_entity - Adds the given entity to Chargeback. assign_charge_plan - Assign a plan to a chargeback entity. assign_cost_center - Assign a cost center to a chargeback entity. create_charge_entity_type - Create charge entity type export_charge_plans - Exports charge plans metadata to file export_custom_charge_items - Exports user defined charge items to a file import_charge_plans - Imports charge plans metadata from given file import_custom_charge_items - Imports user defined charge items metadata from given file list_charge_plans - Gives a list of charge plans in Chargeback. list_chargeback_entities - Gives a list of all the entities in Chargeback list_chargeback_entity_types - Gives a list of all the entity types that are supported in Chargeback list_cost_centers - Lists the cost centers in Chargeback. remove_chargeback_entity - Removes the given entity from Chargeback. unassign_charge_plan - Un-assign the plan associated to a chargeback entity. unassign_cost_center - Un-assign the cost center associated to a chargeback entity.Configuration/Association History disable_config_history - Disable configuration history computation for a target type. enable_config_history - Enable configuration history computation for a target type. set_config_history_retention_period - Sets the amount of time for which Configuration History is retained.ConfigurationCompare config_compare - Submits the configuration comparison job get_config_templates - Gets all the comparison templates from the repositoryCompliance Verbs fix_compliance_state - Fix compliance state by removing references in deleted targets.Credential Verbs update_credential_setData Subset Verbs export_subset_definition - Exports specified subset definition as XML file at specified directory path. generate_subset - Generate subset using specified subset definition and target database. import_subset_definition - Import a subset definition from specified XML file. import_subset_dump - Imports dump file into specified target database. list_subset_definitions - Get the list of subset definition, adm and target nameDelete pluggable Database Job Verbs delete_pluggable_database - Delete a pluggable databaseDeployment Procedure Verbs get_runtime_data - Get the runtime data of an executionDiscover and Push to Agents Verbs generate_discovery_input - Generate Discovery Input file for discovering Auto-Discovered Domains refresh_fa - Refresh Fusion Instance run_fa_diagnostics - Run Fusion Applications DiagnosticsFusion Middleware Provisioning Verbs create_fmw_domain_profile - Create a Fusion Middleware Provisioning Profile from a WebLogic Domain create_fmw_home_profile - Create a Fusion Middleware Provisioning Profile from an Oracle Home create_inst_media_profile - Create a Fusion Middleware Provisioning Profile from Installation MediaGold Agent Image Verbs create_gold_agent_image - Creates a gold agent image. decouple_gold_agent_image - Decouples the agent from gold agent image. delete_gold_agent_image - Deletes a gold agent image. get_gold_agent_image_activity_status - Gets gold agent image activity status. get_gold_agent_image_details - Get the gold agent image details. list_agents_on_gold_image - Lists agents on a gold agent image. list_gold_agent_image_activities - Lists gold agent image activities. list_gold_agent_image_series - Lists gold agent image series. list_gold_agent_images - Lists the available gold agent images. promote_gold_agent_image - Promotes a gold agent image. stage_gold_agent_image - Stages a gold agent image.Incident Rules Verbs add_target_to_rule_set - Add a target to an enterprise rule set. delete_incident_record - Delete one or more open incidents remove_target_from_rule_set - Remove a target from an enterprise rule set. Job Verbs export_jobs - Export job details in to an xml file import_jobs - Import job definitions from an xml file job_input_file - Supply details for a job verb in a property file resume_job - Resume a job or set of jobs suspend_job - Suspend a job or set of jobs Oracle Database as Service Verbs config_db_service_target - Configure DB Service target for OPCPrivilege Delegation Settings Verbs clear_default_privilege_delegation_setting - Clears the default privilege delegation setting for a given list of platforms set_default_privilege_delegation_setting - Sets the default privilege delegation setting for a given list of platforms test_privilege_delegation_setting - Tests a Privilege Delegation Setting on a hostSSA Verbs cleanup_dbaas_requests - Submit cleanup request for failed request create_dbaas_quota - Create Database Quota for a SSA User Role create_service_template - Create a Service Template delete_dbaas_quota - Delete the Database Quota setup for a SSA User Role delete_service_template - Delete a given service template get_dbaas_quota - List the Database Quota setup for all SSA User Roles get_dbaas_request_settings - List the Database Request Settings get_service_template_detail - Get details of a given service template get_service_templates - Get the list of available service templates rename_service_template - Rename a given service template update_dbaas_quota - Update the Database Quota for a SSA User Role update_dbaas_request_settings - Update the Database Request Settings update_service_template - Update a given service template. SavedConfigurations get_saved_configs - Gets the saved configurations from the repository Server Generated Alert Metric Verbs validate_server_generated_alerts - Server Generated Alert Metric VerbServices Verbs edit_sl_rule - Edit the service level rule for the specified serviceSiebel Verbs list_siebel_enterprises - List Siebel enterprises currently monitored in EM list_siebel_servers - List Siebel servers under a specified siebel enterprise update_siebel- Update a Siebel enterprise or its underlying serversSiteGuard Verbs add_siteguard_aux_hosts - Associate new auxiliary hosts to the system configure_siteguard_lag - Configure apply lag and transport lag limit for databases delete_siteguard_aux_host - Delete auxiliary host associated with a site delete_siteguard_lag - Erases apply lag or transport lag limit for databases get_siteguard_aux_hosts - Get all auxiliary hosts associated with a site get_siteguard_health_checks - Shows schedule of health checks get_siteguard_lag - Shows apply lag or transport lag limit for databases schedule_siteguard_health_checks - Schedule health checks for an operation plan stop_siteguard_health_checks - Stops all future health check execution of an operation plan update_siteguard_lag - Updates apply lag and transport lag limit for databasesSoftware Library Verbs stage_swlib_entity_files - Stage files of an entity from Software Library to a host target.Target Data Verbs create_assoc - Creates target associations delete_assoc - Deletes target associations list_allowed_pairs - Lists allowed association types for specified source and destination list_assoc - Lists associations between source and destination targets manage_agent_partnership - Manages partnership between agents. Used for explicitly assigning agent partnershipsTrace Reports generate_ui_trace_report - Generate and download UI Page performance report (to identify slow rendering pages)VI EMCLI Verbs add_virtual_platform - Add Oracle Virtual PLatform(s). modify_virtual_platform - Modify Oracle Virtual Platform.To get more details about each verb, execute$ emcli help <verb_name>Example: $ emcli help list_assocNew resources in list verbThese are the new resources in EM CLI list verb :Certificates WLSCertificateDetails Credential Resource Group PreferredCredentialsDefaultSystemScope - Preferred credentials (System Scope) PreferredCredentialsSystemScope - Target preferred credentialPrivilege Delegation Settings TargetPrivilegeDelegationSettingDetails - List privilege delegation setting details on a host TargetPrivilegeDelegationSetting - List privilege delegation settings on a host PrivilegeDelegationSettings - Lists all Privilege Delegation Settings PrivilegeDelegationSettingDetails - Lists details of Privilege Delegation Settings To get more details about each resource, execute$ emcli list -resource="<resource_name>" -helpExample: $ emcli list -resource="PrivilegeDelegationSettings" -helpDeprecated Verbs:Agent Administration Verbs resecure_agent - Resecure an agentTo get the complete list of verbs, execute:$ emcli help Stay Connected: Twitter | Facebook | YouTube | Linkedin | Newsletter Download the Oracle Enterprise Manager 12c Mobile app

Search Results

Search found 12019 results on 481 pages for 'stop execution'.

Page 434/481 | < Previous Page | 430 431 432 433 434 435 436 437 438 439 440 441 | Next Page >

- by jamiet

- by Mysticgeek

- by Janice J. Heiss

- by thatjeffsmith

- by Piotr Rodak

- by SungmoonCho

- by Ajay Khanna

- by DigitalGeekery

- by Rob Farley

- by jamiet

- by Chris Hoffman

- by Ravish

- by Tarun Arora

- by John Smith

- by Dennis Vroegop

- by Matthew Guay

- by Liam Westley

- by Matthew Guay

- by jkauffman

- by Simon Thorpe

- by Pinal Dave

- by sreejukg

- by Bertrand Le Roy

- by Antoinette O'Sullivan

- by SubinDaniVarughese

< Previous Page | 430 431 432 433 434 435 436 437 438 439 440 441 | Next Page >