Search Results

Search found 13401 results on 537 pages for 'double checked'.

Page 435/537 | < Previous Page | 431 432 433 434 435 436 437 438 439 440 441 442  | Next Page >

  • Latitude D600 USB port problem

    - by Moab
    Both USB ports stopped communicating on my D600, they have power, my optical mouse still lights up, no device works on the ports, everything is fine in Device manager in Dual boot XP and W7. Checked the bios, not much in there for USB. No usb device shows up when I use the F12 boot device menu either, so it must be some hardware issue. I have another hard drive with Ubuntu on it, popped it in and USB does not communicate with it either. Appears to have 5v but no communication, any Ideas besides another motherboard or USB card for the pcmcia slot (these don't work to well from my research)? I mostly use them for mass storage devices and pcmcia slots don't supply enough power for these devices. Thanks to all who answer with last ditch efforts. I hate to give up on it, its been good to me and still runs rather well for its vintage. EDIT: I did inspect the ports with a flashlight and did a partial disassembly of the laptop in an attempt to check the solder joints, but would require complete motherboard removal to see them, that is where I stopped. .

    Read the article

  • nginx with fail2ban and mod_security

    - by Mahesh
    I forgot to update my fail2ban config for nginx. I just moved to nginx from apache. Today, I got a lot of cals from a single IP. IP tried to access login pages with post and get methods IP tried to use nginx as a proxy (GET http:/...) IP searched images, js, css folders IP tried to inject -d url_allow_fopen =1 and something similar. Most of the calls ended with 404. http { limit_req_zone $binary_remote_addr zone=app:10m rate=5r/s; ... server { ... location / { limit_req zone=app burst=50; } I got approximately 50 requests from that ip for a second. So i updated my nginx like the above. Will it avoid too many connections per second now? I have updated my fail2ban jail.local to support nginx. I am confused with the nginx-noscript.conf [Definition] failregex = ^<HOST> -.*GET.*(\.php|\.asp|\.exe|\.pl|\.cgi|\scgi) ignoreregex = I am serving php with nginx. I checked apache's noscript.conf and which has .php extension on it too. I tested this above settings before restarting fail2ban and got thousands of ips matched. I removed php and nothing matched. Do i need .php| in nginx-noscript.conf? Using mod_security and fail2ban together bring any problem? When i was searching today, i came to know mod_security is available for nginx too. So i am planning to use it too.

    Read the article

  • Automatically creating volume partitions on boot

    - by Justin Meltzer
    I followed this guide: http://www.mongodb.org/display/DOCS/Amazon+EC2+Quickstart to set up Mongodb. It had me create a RAID 10 array out of the four devices on EBS. Then it had me create a physical volume, a volume group, and three logical volumes out of that RAID 10 array. Lastly it had me create ext4 filesystems out of the logical volumes and mount them. Now the quickstart guide had me put two things in place so that these steps would be replicated on reboot of the system. It had me add some instructions to the mdadm.conf file to automatically create the RAID 10 array, and it also had me add instructions to the fstab file to automatically mount the filesystem for each logical volume. However, the quickstart guide does not have anything for automatically creating the logical volumes from the RAID 10 array. I checked my system and see that each of the four devices are part of a RAID array: $ sudo mdadm -Q /dev/sdh1 /dev/sdh1: is not an md array /dev/sdh1: device 0 in 4 device unknown raid10 array. Use mdadm --examine for more detail. However, the filesystem is never created or mounted from fstab because it's trying to mount it from logical volumes that were never created (or so it seems). My question is, how can I automatically accomplish all the steps from the quickstart guide on a reboot of the system, and what config file do I need to add data to so that I can automatically create these volume partions after the RAID 10 is created but before the filesystem is mounted. Also I'm unsure whether fstab actually creates and mounts the filesystem or just mounts the filesystem.

    Read the article

  • Acer Aspire Touchscreen Not Responding

    - by Jerry
    I have an Acer Aspire z3101 all-in-one Touch screen running Windows 7 Home Premium. I am unable to get the screen to respond to my touch. I have checked the system and all drivers are ok according to comp. Using the settings to setup the pen and touch and to calibrate does not work. My touch brings no response at all. I had reinstalled the applications - Windows Touch Pack and Acer Touch Portal which didn't help. Today I done a complete reinstall returning comp back to factory settings and still there is no response. At first I thought that perhaps a driver or file was missing but now doubt that due to the reinstall not helping. Have you any idea what could be causing this problem? I am now at the stage of pulling my hair out and haven't had too much help from Acer. I have had the computer for just over a year now and so it is no longer under guarantee and this has me very worried due to my being unemployed. Any help is much appreciated. Thank you.

    Read the article

  • Ways to parse NCSA combined based log files

    - by Kyle
    I've done a bit of site: searching with Google on Server Fault, Super User and Stack Overflow. I also checked non site specific results and and didn't really see a question like this, so here goes... I did spot this question, related to grep and awk which has some great knowledge but I don't feel the text qualification challenge was addressed. This question also broadens the scope to any platform and any program. I've got squid or apache logs based on the NCSA combined format. When I say based, meaning the first n col's in the file are per NCSA combined standards, there might be more col's with custom stuff. Here is an example line from a squid combined log: 1.1.1.1 - - [11/Dec/2010:03:41:46 -0500] "GET http://yourdomain.com:8080/en/some-page.html HTTP/1.1" 200 2142 "-" "Mozilla/5.0 (Windows; U; Windows NT 6.1; C) AppleWebKit/532.4 (KHTML, like Gecko)" TCP_MEM_HIT:NONE I'd like to be able to parse n logs and output specific columns, for sorting, counting, finding unique values etc The main challenge and what makes it a little tricky and also why I feel this question hasn't yet been asked or answered, is the text qualification conundrum. When I spotted asql from the grep/awk question, I was very excited but then realised that it didn't support combined out of the box, something I'll look at extending I guess. Looking forward to answers, and learning new stuff! Answers doesn't have to be limited to platform or program/language. For the context of this question, the platforms I use the most are Linux or OSX. Cheers

    Read the article

  • .php file blank - .php5 files works

    - by Kleidi
    I have a problem with a server of mine. I've installed virtualmin/webin on it for administration and I have 1 domain on it. DNS management is external. On this domain I only have an html "Under Construction" index and 5 subdomains. In all those subdomains I have PHP systems running perfectly. I've tried to install Wordpress on the main domain and I'm having some issues: None .php files loads. I have made a phpinfo file on it to check it and it won't work either; only a blank page appears. When I check the source code of it in browser, appears the code. I have changed the extensions to .php5 and it worked perfectly. Something is going wrong with it but I can't figure out what. I have checked the apache error and nothing appears. 3 Days ago I upgraded from php 5.2.* to 5.4.21. Server is running CentOS 5.10.

    Read the article

  • Windows 7 BSOD on boot after windows update

    - by Razor Storm
    After Windows updates today, I restarted my desktop (for the first time in a couple weeks), and on boot up ran into a BSOD: STOP: 0x0000007E (0xFFFFFFFFC0000005, 0xFFFFF8000355AB5A, 0xFFFFF880031CB3A8, 0xFFFFF880031CAC10) I tried system restore, but there was only 1 restore point which was from all the way back in January. I tried it anyway but after 10 minutes of running it said system restore could not be completed. Additional info: I checked my BIOS and it is detecting my rams. CPU is Intel Sandy Bridge i5-2500k overclocked to 4.3GHz. I reclocked it back to stock speeds (3.3 GHz) in case it was causing the issue (I highly doubt that it is). But the problem persists. Running Windows 7. 12 GB of RAM at 1333 MHz OS on 64gb SSD. What is causing this? How should I fix it? Also, if it is caused by windows update, is there a way to undo the update with command prompt? I tried safemode, and the blue screen comes up as well, but I am able to access command prompt.

    Read the article

  • Client cannot access my IIS7 web server

    - by Soccerwiz
    I have a Windows 2008 web server on running IIS 7 with about 25 websites. One of those sites is an SaaS application that is accessed constantly throughout the day. However, one particular client keeps getting blocked from my server. They will be using the service, and then all of a sudden they cannot access the program, or any other site on the server. The entire office of 4 users is blocked from accessing anything on the web server. A trace route reveals they get all the way to the server before they are blocked. However, they can access a linux server that is a different VM with a different IP on the same physical server. Also, when they are blocked from their office, they can still access the site from their mobile phone or local Starbucks. They can also occasionally reset the router and gain access to the web server again as they are on a dynamic IP address. I checked IIS and allow all IPs to access the server. There is nothing in the logs the says anything about a user being banned. I really have no idea what is causing this? Could it be a virus on their end? I have even moved the SaaS to a completely new server in a different location, and they were working fine for about a month, and then the problem started occurring again. Are there any hidden blacklists in IIS? Or is it a routing issue on their end?

    Read the article

  • Windows 8 install app for multiple user accounts

    - by Robert Graves
    I purchased Adera episode 2 intending to play through it with my son. We each have our own user account on the same PC. When my son logged in, he was prompted to purchase the app which I had already purchased, installed, and played on the same PC. So I checked the Terms of Use. After selecting an app in the store, there is a Terms of Use link on the left side under the Install button. It is almost impossible to identify it as a link unless you put your mouse over it. The Terms of Use are standard across all apps in the store, not specific to particular apps. The terms of use indicates that the app may be installed on up to five devices, but says nothing about multiple user accounts on those devices. However, this Microsoft blog article indicates that it is allowed. Say, for example, that your family has a shared PC. You have previously used your Microsoft account to purchase a game that all your kids like to play. You can install it for each of your kids by having each of them sign in to their Windows accounts on the shared PC, then launch the Store and sign in to the Store using your own Microsoft account. There, you’ll see all your apps and you can re-install the app on your kid’s Windows account. Installing apps on multiple user accounts on a shared PC still only counts as one of the five allowable PCs where you can install apps. So I have two questions: Is it permissible under the Terms of Use to install the app under multiple accounts on the same device? If so, how do I do so given that my son has already signed into the store using his own Microsoft account.

    Read the article

  • Library conflict in Mac OS X

    - by Juan Medín
    I was trying to install the ImageMagick library on Mac OS X Snow Leopard, and first I tried port and, after it failed, homebrew. It updated some dependencies and installed ImageMagick without problems. So far so good. The problem came when I ran Apache. I got the following error in the system log: 07/04/11 12:55:15 org.apache.httpd[41841] httpd: Syntax error on line 115 of /private/etc/apache2/httpd.conf: Cannot load /opt/local/apache2/modules/libphp5.so into server: dlopen(/opt/local/apache2/modules/libphp5.so, 10): Library not loaded: /opt/local/lib/libpng12.0.dylib\n Referenced from: /opt/local/apache2/modules/libphp5.so\n Reason: image not found I checked the /opt/local/lib and surprise! I don't have the libpng12.0 but the libpng14.0. So, as far as I can tell, something went wrong installing the ImageMagick library. Now, I can't find a way to rollback to the previous libraries, other than copying them from the backup. Do you know if is there a way to recover the previous state or reinstall Apache? Or is this just a corrupt state and I must reinstall OS X?

    Read the article

  • ssh hangs on "Last login" line

    - by Pavel H
    This happened for the first time three days ago - I ssh to the server, authenticate using a password, get the welcome message but it remains hanging on the "Last login:..." line. The command line doesn't show and the server doesn't react to my input. Other services on the server keep working ok (apache, tomcat, database, ..). The box has an out-of-band management using which I was able to restart it. After the restart the ssh worked ok again and I didn't find anything suspicious in the logs. Three days later the same problem occurs on this box again, and newly on yet another server in the cluster - 100% same symptoms. Both servers have about 2 month old installation of Debian Squeeze (6.0.2) and the problem never occurred before despite frequent ssh-ing, so it should not be a problem of settings. We haven't been installing anything new for quite some time now. I also made sure there is enough disk space on both servers. Since it started to happen all of a sudden on two servers at about the same time, I suspect some bug may have been introduced via Debian updates, yet I haven't been able to find anyone with the same problem. Most similar issues I have found: ssh freezes at the "Last Login Line" - in our case everything worked fine until recently, so nothing related to settings should be our problem. Diskspace checked, I couldn't check the memory but I would expect something would be in the logs if the system had been running out of it. Remote Fedora system unresponsive, odd but consistent behavior when trying to log in - problem with high load on the server; unlike in this case, nothing changes even if I wait for 10+ minutes

    Read the article

  • Firefox: Clear History Is SUPER EFFECTIVE?

    - by acidzombie24
    I'm seeing a performance problem on certain sites (like gmail) which clearing the history should not affect. Is this a website problem or a firefox problem and what can i do to fix it w/o clearing my history? Also as a webdeveloper i am interested in how to make this happen (or not happen). I'm using firefox 8 and i confirmed the problem by copying my profile to firefox 11 (portable). To reproduce go to gmail.com and sign in. Have your task manager open. Once you click signin or hit enter gmail will bring up your emails. Keep your eye on the CPU usage. I checked and right now on this machine its using all my CPU for 22seconds!!!! Yes. 22 seconds. Once i cleared my "browser & download history" Its <6seconds. WTF. I have no idea why or how the size of history and CPU usage when loading up gmail are correlated. I have firefox setup so it never clears the history. But... 22seconds is a disaster. Can someone explain why this is happening or a fix that isnt clearing my history? I tried visiting a few websites and only gmail eats up that much CPU. Most websites only take <5sec of max CPU. So maybe this is a gmail problem? Or a firefox problem that gmail happens to hit? I still dont understand why it happens. -edit- I forgot to mention places.sqlite is 90mb. I dont think that matters. I have a sqlite file 400mb which is pretty much 2 large tables. It has no performance issues

    Read the article

  • Why does lighttpd keep static files in cache, even when modified on disk ?

    - by Pixelastic
    I am using lighttpd to serve static files. I have a bunch of images in a dir that I regularly update. This will change the file content (and filesize) as well as the modification date, but not their filename. When I access the files through http, the updates are not taken into account and lighty serves the old file. I can manually rename the file to something different, then lighttpd will return a 404 error, and if I rename my file back, I will get the correct updated version. Seems like lightty is using some kind of cache mechanism of its own (which is fine) to return static files. Unfortunatly, it seems that this mechanism doesn't update itself when files are modified. I checked through Wireshark, and my browser is really doing a request to the file, this is not a browser caching issue. It returns a 200 OK when requesting it from an empty cache, and a 304 Not Modified otherwise, as expected. But the file is returned with a wrong Last-Modified header that do not reflect the real last modification date. Maybe there is some config directive that I am not aware of ? I would like the files returned by lighty to reflect the changes made on disk directly, or at least being able to invalidate its cache.

    Read the article

  • Windows 7 automatically logs out when logging in

    - by Luke
    A Windows 7 HP x64 computer is set to automatically log in (no password), but once it starts logging in, it starts to load the desktop after the welcome screen, but before icons or background images are loaded, it goes to the Welcome screen saying 'Logging Off'. I can log in with Safe Mode, and I ran a couple different virus scans, with no detections. I also tried checking the userinit.exe file in System32 (as suggested by MANY users for Windows XP), but it's the same version as a working system. I also checked the registry under HKLM\Software\Microsoft\Windows NT\CurrentVersion\Winlogon for the SHELL and UserInit values, but they look normal. I tried to disable all startup items (through MSCONFIG) to select Diagnostic boot, but then I get a blue screen about the video driver not loading. Any other ideas? EDIT I created a new user, and it could log in no problems. I am thinking it's the NTUSER.DAT file. I just renamed it to NTUSER.DAT.old, then tried logging in as the problem user. I could log in, but as a TEMP profile. His profile folder is now C:\Users\TEMP, and his old folder is still accessible but in the wrong location. EDIT 2 I can't seem to turn off the TEMP profile, so I'm open to other suggestions. Copying the folders (i.e. Documents, Music, etc) does not work, as it creates an additional TEMP.000 then TEMP.001 folder each time the user logs in.

    Read the article

  • I have a perl script that is supposed to run indefinitely. It's being killed... how do I determine who or what kills it?

    - by John O
    I run the perl script in screen (I can log in and check debug output). Nothing in the logic of the script should be capable of killing it quite this dead. I'm one of only two people with access to the server, and the other guy swears that it isn't him (and we both have quite a bit of money riding on it continuing to run without a hitch). I have no reason to believe that some hacker has managed to get a shell or anything like that. I have very little reason to suspect the admins of the host operation (bandwidth/cpu-wise, this script is pretty lightweight). Screen continues to run, but at the end of the output of the perl script I see "Killed" and it has dropped back to a prompt. How do I go about testing what is whacking the damn thing? I've checked crontab, nothing in there that would kill random/non-random processes. Nothing in any of the log files gives any hint. It will run from 2 to 8 hours, it would seem (and on my mac at home, it will run well over 24 hours without a problem). The server is running Ubuntu version something or other, I can look that up if it matters.

    Read the article

  • IDE compatability with SATA image

    - by Ormis
    We had an old CNC machine's hard-drive fail recently. The hard-drive is an old 1275MB IDE (Seagate) and there were defiantly bad sectors on it. I was able to image the contents of the drive onto a drive in my computer before it became completely unusable (I used DD, replacing all bad sectors w/ 0s). After running a couple chdsks, the SATA drive will boot off of the image. This is great, but there's one problem. The CNC machine old and requires IDE, I've attempted to copy the currently booting image off of the SATA drive and onto IDE drives numerous times in numerous ways and every time I do so the machines return that a boot device cannot be found. Some other information: The file system is fat32, running windows 98 The SATA drive is an 80gb drive I have tried copying the image to three 20gb and two 80gb IDE drives I have checked the jumper on the back of the IDE drives when using them If anyone has any ideas, questions, suggestions, etc. please let me know. P.S. I would just put a fresh install of win98 on the machine if i had the installation media (so that's out of the question). And if it comes to it, this is my last week working here, so I'll leave that to my co-worker. EDIT: Also, I have tried using Clonezilla as well as straight up DD to copy the image to the IDE drives.

    Read the article

  • Periodic internet connection drops

    - by user9647
    My setup is a dsl modem, and a dlink di 524M router. I'm also using a Witopia VPN which runs through OpenVPN. I've been having trouble with the internet connection dropping very frequently. It comes back shortly, without even a router/modem/computer restart. This happens as frequently as every ten minutes. Occasionally (not often) it will last as long as an hour or two without dropping. When it drops, I can get it back almost immediately by clicking Reconnect in the OpenVPN GUI and letting that do it's thing. It's worth noting that I'm in China. Calling support is a bit difficult because of that. Also I don't really understand all of the router's software, although I've got it generally figured out. I've tried a bunch of stuff, attempts to diagnose and/or fix the problem. No success with any of the following: I've power cycled both the modem and the router. I've tried an ethernet connection to the router. I've connected without the VPN. I've disabled IEEE authentication on all connections. I've checked for viruses. I've tried lifting it off the ground so as to prevent overheating.

    Read the article

  • Suspected Corrupted Windows 7 MBR?

    - by AridDecay
    So, this may not be the correct place to put up my question, but i'll give it a shot. I'm having an issue repairing this computer. It was brought to me with the described issue of 'Not turning on' Later, I found that it would come with the error of 'No boot sector found on internal hard drive.' I assumed it was an MBR issue due to a virus or cutting a Windows update short. I booted into my trusty recovery enviroment and ran bootrec.exe /FIXMBR and restarted -- No luck I started to think (After multiple attempts to get the MBR sorted out, including creating a new boot sector) that the Hard-drive was possibly starting to cave in on itself, so I booted into a linux bootable CD and went to check the SMART data. Odd, say's it's inaccessible. That seems odd to me, considering it's a newer (two years old or so) Windows 7 computer. All new Hard-drives have SMART. So, I checked the BIOS. No mention of SMART anywhere. Greaaaat. I decided as a last-ditch effort to switch the hard-drive type to ATA in the BIOS (God knows why, I was getting frusterated) instead of AHCI. VOILA! It actually attempts to boot, gets halfway through the little windows animation, does an incredibly (Half a second) quick BSOD, and shuts down. Does anyone have ideas on what's going on here? I'm at my wits end.

    Read the article

  • Size of modules within initrd

    - by LiKao
    I am currently trying to manually replace the kernel within ubuntu-core on an embedded device with a custom kernel. However when I try to update the initrd my initrd becomes much bigger. Here is what I did: Extract the initrd that was shipped with ubuntu Make a list of all modules within the old initrd get the same modules from the new module director at /lib/modules/new_kernel_version add these modules to the initrd and remove the old ones If I do this my initrd becomes quite bigger than the original one, so I checked the individual modules. I picked the btrfs.ko filesystem driver as an example. So by comparing these two modules I noticed the one I just picked into the initrd was much bigger, which caused the difference in size. -rw-r--r-- 1 root root 999K Nov 14 15:06 btrfs.ko For the btrfs.ko within the shipped initrd. -rw-r--r-- 1 root root 7.2M Nov 14 15:08 btrfs.ko For the new btrfs.ko. What is different between these two modules? Could this be caused by some faulty setting for the new kernel? When producing the kernel I copied /proc/config.gz and used make oldconfig to update it, so all optimisations should be the same for both kernels. Or is there something else which is being done to the modules before they are put into the initrd? Maybe is there even some better way to build a new initrd for the new kernel in ubuntu altogether. Update: I just also tested with an initrd which I created from scratch using the mkinitrfs command within ubuntu, and it has the same size difference that I found for the initrd I manually updated.

    Read the article

  • What to do about old MacBook

    - by John
    I have a White MacBook version 10.5.8. I accidentally dropped it and about an inch of the most right side of the screen is blacked out. I can't see the clock and Trash Can because of this. I checked how much it would cost to repair, and the cost of repairing is a flat rate of $300. I thought that was kind of expensive, like a third of the cost of the MacBook itself. accidentally dropping a notebook is something that would happen sooner or later, so I think getting a Lenovo is the best. I ended up getting a MacBook pro 15 inch, but do you think it's worth the money to fix my old MacBook? I even saw some used MacBooks available on Ebay for about $400. Anyways I don't know what to do with it. I do like its screen and keyboard better than the MacBook Pro ones, because the screen is less glare-y and the keyboard is more crisp and fun to type on, and its more wieldy when I'm using it while lying down.

    Read the article

  • How does one debug Windows network share authentication?

    - by ajs410
    I have machine0 with 32-bit Vista, logged in as a domain user, running a VMWare image of 32-bit Vista, logged in as a local user, with the VM set to bridge the network. From an administrator account (called admin) within the VM, I try to access the hidden C$ share on machine0 (i.e. start - run - "\\machine0\C$\"). I get no prompts for credentials. Worse, machine0 has an admin account (different password), and machine0\admin gets locked out when VM\admin tries to access the network share. I get a message several seconds later, which feels like a cached credential failure leading to the lockout. I have checked several places for cached credentials; net use, Stored Usernames and Passwords, mapped shares. I rebooted (both machine0 and VM) to make sure the session was clear of any cached credentials. I can force net use to use my domain credentials when accessing machine0, and then I can see the share. I can also see shares that do not require credentials. I decided to try another machine on the network (machine1), 64-bit Vista, local user. This machine has no lockout policy, and after several seconds (feels like failed cached credentials again) it prompts me for credentials. After I enter them, it re-prompts me, saying "logon unsuccessful" (tried my domain credentials, and also machine1\admin's). Which is bogus, because I proceed to log on with remote desktop using the machine1\admin credentials. I have tried this on another machine (machine2, 64-bit Vista), running a copy of the same 32-bit VM, and I don't remember having this problem. machine0 has a fingerprint reader...could that try storing passwords and interfere? Are there any places I'm missing where there could be cached credentials? Is there a way to see what credentials are flying around when I try to connect?

    Read the article

  • IIS 6 Denies access to the default document

    - by Jim
    I've got Windows Server 2k3 with IIS6 hosting a couple ASP.NET MVC 2 applications (.NET 4), all in the Default Web Site. Most of them simply use Integrated authentication, but a couple use forms as well. All the applications work properly and are correctly accessible. The problem I'm trying to resolve is access to the default document. It is currently specified as index.htm. Both index.htm and the Default Web Site are configured to allow anonymous access (with none of the authenticated acces boxes checked). However, access is denied to the file. Accessing via server.domain.tld/ and server.domain.tld/index.htm both yield 401 errors. However, server.domain.tld/default.htm (file does not exist) properly returns a 404. If I alter the file security on index.htm to allow integrated authentication, then requesting /index.htm directly works properly for users with domain accounts, but anonymous users get a login prompt/401. How can I configure IIS to allow all users to view index.htm via server.domain.tld/?

    Read the article

  • HPET missing from available clocksources on CentOS

    - by squareone
    I am having trouble using HPET on my physical machine. It is not available, even though I have enabled it in my bios, forced it in grub, and triple checked my kernel to include HPET in its compilation. Motherboard: Supermicro X9DRW Processor: 2x Intel(R) Xeon(R) CPU E5-2640 SAS Controller: LSI Logic / Symbios Logic SAS2004 PCI-Express Fusion-MPT SAS-2 [Spitfire] (rev 03) Distro: CentOS 6.3 Kernel: 3.4.21-rt32 #2 SMP PREEMPT RT x86_64 GNU/Linux Grub: hpet=force clocksource=hpet .config file: CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_HPET=y dmesg | grep hpet: Command line: ro root=/dev/mapper/vg_xxxx-lv_root rd_NO_LUKS rd_LVM_LV=vg_xxxx/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_xxxx/lv_swap rd_NO_DM LANG=en_US.UTF-8 rhgb quiet panic=5 hpet=force clocksource=hpet Kernel command line: ro root=/dev/mapper/vg_xxxx-lv_root rd_NO_LUKS rd_LVM_LV=vg_xxxx/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_xxxx/lv_swap rd_NO_DM LANG=en_US.UTF-8 rhgb quiet panic=5 hpet=force clocksource=hpet cat /sys/devices/system/clocksource/clocksource0/current_clocksource: tsc cat /sys/devices/system/clocksource/clocksource0/available_clocksource: tsc jiffies What is even more confusing, is that I have about a dozen other machines that utilize the same kernel .config, and can use HPET fine. I fear it is a hardware issue, but would appreciate any advice or help with getting HPET available. Thanks in advance!

    Read the article

  • User receives group membership error to terminal server even though has rights

    - by BlueToast
    http://www.hlrse.net/Qwerty/TSLoginMembership.png To log on to this remote computer, you must be granted the Allow log on through Terminal Services right. By default, members of the Remote Desktop Users group have this right. If you are not a member of the Remote Desktop Users group or another group that has this right, or if the Remote Desktop User group does not have this right, you must be granted this right manually. Only as of today a particular user began receiving this message for a second terminal server they use; otherwise, they have never had any problems authenticating into this server. We have no restrictions on simultaneous and multiple logins. On each terminal server, we have a group and security group like "_Users" locally in the Builtin\Remote Desktop Users group. For this particular user, on this particular terminal server we have locally given him Administrator, Remote Desktop Users, and Users membership; in AD we have given him DOMAIN\Administrator, Builtin\Remote Desktop Users, DOMAIN\_Users. It still gives us that error message. We gave him membership to another terminal server (random) by simply making him member of another DOMAIN\_Users group -- successfully able to login to that random terminal server. So, from scratch we created an AD account 'dummy' (username) with only Domain Users membership. Tried to login to this particular server, no success. So I added 'dummy' to DOMAIN\_Users group, and then was successfully able to login. Other users from this user's department are able to login to this particular server just fine as well. We checked the Security logs on this particular server, and while it is logging everything, the only thing it appears to not log are these failed login attempts from this particular user who receives this error message. We have tried rebooting the server, and the user is still receiving that error message.

    Read the article

  • Skipping nginx PHP cache for certain areas of a site?

    - by DisgruntledGoat
    I have just set up a new server with nginx (which I am new to) and PHP. On my site there are essentially 3 different types of files: static content like CSS, JS, and some images (most images are on an external CDN) main PHP/MySQL database-driven website which essentially acts like a static site dynamic PHP/MySQL forum It is my understanding from this question and this page that the static files need no special treatment and will be served as fast as possible. I followed the answer from the above question to set up caching for PHP files and now I have a config like this: location ~ \.php$ { try_files $uri =404; fastcgi_cache one; fastcgi_cache_key $scheme$host$request_uri; fastcgi_cache_valid 200 302 304 30m; fastcgi_cache_valid 301 1h; include /etc/nginx/fastcgi_params; fastcgi_pass unix:/var/run/php-fastcgi/php-fastcgi.socket; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /srv/www/example$fastcgi_script_name; fastcgi_param HTTPS off; } However, now I want to prevent caching on the forum (either for everyone or only for logged-in users - haven't checked if the latter is feasible with the forum software). I've heard that "if is evil" inside location blocks, so I am unsure how to proceed. With the if inside the location block I would probably add this in the middle: if ($request_uri ~* "^/forum/") { fastcgi_cache_bypass 1; } # or possible this, if I'm able to cache pages for anonymous visitors if ($request_uri ~* "^/forum/" && $http_cookie ~* "loggedincookie") { fastcgi_cache_bypass 1; } Will that work fine, or is there a better way to achieve this?

    Read the article

< Previous Page | 431 432 433 434 435 436 437 438 439 440 441 442  | Next Page >