Search Results

Search found 18209 results on 729 pages for 'loop device'.

Page 435/729 | < Previous Page | 431 432 433 434 435 436 437 438 439 440 441 442  | Next Page >

• Can't find generic USB audio driver for a Samson COU1 USB microphone

  - by marcipollo

  I am unable to use a Samson USB CO1U microphone on a PC running XP, SP3. When I plug it into the USB port, Windows generates the sound indicating that it has found new hardware, and the green LED on the mic lights. But, it does not work, and the device manager reports that it cannot find a driver after searching. The same mic works on a Vista machine. Samson has no driver on their Web site, and insists that the generic audio driver in Windows should work. (http://www.samsontech.com/PRODUCTS/productpage.cfm?prodID=1810). I cannot find a generic USB audio driver at Microsoft.com. Can anyone help? Larry

  Read the article

• help building a PC that can image a dozen hard drives simultaneously

  - by Bigbio2002

  Not sure if this belongs on here or SuperUser, but here goes... I'm trying to figure out how to make a mass hard drive imaging PC out of COTS parts. A dedicated imaging device can do 10 drives at a time, but costs several thousand dollars. So far, I'm thinking to use several 3-port PCI-E Firewire cards, and use some kind of Firewire-to-IDE adapter to connect the drives themselves. The "software" would consist of scripting diskpart, or some other imaging utility. The problem is that I can't seem to find any sort of adapter. I could use standard external hard drive bays, but then I'd have a dozen power cables that I need to plug in. Ugly, messy, and inefficient. I picked Firewire over USB not only for better transfer speeds, but also because FW can deliver power over the bus (and could theoretically power a hard drive). Does anyone have any input on this?

  Read the article

• backup software that ignores user rights

  - by Chris

  Hi, As a computer technician I have to reinstall systems allmost daily (when it can't be repaired ;-)) My problem is that I recover user files by hand and a external mounting device. Most of the time it works fine, but also weekly I have systems with passwords and personal files which are often not sucessfull recovered. I know you can change owner, but when people have 30 GB's af data, my backup computer works for ages to change the rights. Can anyone think of software (commercial is no problem) which does the following: * backup user data without having user rights troubles * have a option to choose what to backup (email accounts, documents, etc, etc) even when it's externaly mounted, in short, it reconizes the folder structure) * Works on different OS's like XP, Vista, W7

  Read the article

• VGA no signal on LCD monitor attached to laptop

  - by Paul

  I bought a new Asus vh242h LCD monitor for use with my lenevo T60 laptop running XP professional. Display info under control panel says "Intel(R) 945GM Express Chipset Family". I am connecting via VGA. When I connect the monitor I get "VGA no signal" and the monitor screen stays blank. I have selected the monitor as the display device on the laptop. The information on the monitor displays the correct screen resolution from the laptop, so the monitor is communicating in some way with the laptop. I've successfully tried the monitor with my Dell inspirion 1525 running Windows Vista. I've change the VGA cable to one I know works. Tried different resolutions. I cannot find and specific drivers on the internet for this monitor, so I assume it should work with Plug and Play. Does anyone know what the problem could be?

  Read the article

• USB sector 0 not fount Kingston USB DT100 G2

  - by java

  Windows constantly asks me "Foramt Disk". when i go to command prompt and type format H: /fs:ntfs or format H: /fs:fat32 response: Cannot determine the number of sectors on this volume. if the benefit DISKPART detail disk Kingston DT 100 G2 USB Device Disk ID: 00000000 Type : USB Status : Online Path : 0 Target : 0 LUN ID : 0 Location Path : UNAVAILABLE Current Read-only State : No Read-only : No Boot Disk : No Pagefile Disk : No Hibernation File Disk : No Crashdump Disk : No Clustered Disk : No DISKPART detail volume Read-only : No Hidden : No No Default Drive Letter: No Shadow Copy : No Offline : No BitLocker Encrypted : No Installable : No Volume Capacity : 0 B Volume Free Space : 0 B what the problem?

  Read the article

• How to add addtional disks to a Windows 2008 KVM based Guest?

  - by taazaa

  I have a Win 2008 KVM based guest VM running on a Ubuntu 10 host. It is a raw image of 22G. I want to add a "data" drive which would show up as "D:\" drive on the guest. I first created a raw image using: qemu-img create -f raw ~/vmdisk2.img 50G Then, tried attaching it using virsh attach-disk. When that did not work, I tried editing the xml file of the VM directly. Both did not seem to work. I would greatly appreciate any help on how to do this and what the best practice is. I want to keep the base image small, so that I can clone it (hopefully) and then attach necessary storage based on the application at hand. Update: The xml of the vm before adding the second drive: <domain type='kvm'> <name>win08e-vm1</name> <uuid>183a4ba0-1c0b-0b04-ad01-aa7c3a4cb390</uuid> <memory>1048576</memory> <currentMemory>1048576</currentMemory> <vcpu>2</vcpu> <os> <type arch='x86_64' machine='pc-0.12'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='localtime'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/win08e-vm1.img'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/home/taazaa/iso/Win08ER264.iso'/> <target dev='hdc' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='1' unit='0'/> </disk> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='bridge'> <mac address='52:54:00:7f:a7:ae'/> <source bridge='br0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' keymap='en-us'/> <video> <model type='vga' vram='9216' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </memballoon> </devices> </domain> Thanks!

  Read the article

• BGP Router reccomendations for simple redundancy [closed]

  - by Jona

  We have two sites that each have an internet connection and have a dedicated dark fibre between them. Each site has it's own IP space and we have an AS number. We're looking to be resilient to failure of the internet connection to either site and so need to buy a pair of approriate routers. Requirements are: Able to run 2 bgp sessions (one with the ISP, one with the other site router) Option to take a full table from the upstream ISPs would be nice. Able to provide HA gateways on the LAN side (e.g. 192.168.0.254 will automatically migrate if it's host router lost power) A dedicated device rather than a server running Linux / BSD Not crazy expensive. Any help / advice much appreciated.

  Read the article

• How do I remove/uninstall a corporate VPN?

  - by Metro Smurf

  I have a corporate VPN installed on one of my Windows XP systems that I'd like to completely uninstall. There are no programs listed in the add/remove programs dialog matching the corporate VPN name or similar. I can find the VPN being launched from here: C:\Documents and Settings\All Users\Application Data\Microsoft\Network\Connections\Cm\<Company Name> I can see the VPN connection under network connections: Name Type Device Name Connection Manager ------------------- Connection to <Company Name> Connection Manger WAM Miniport (PPTP) Do I just need to delete the connection from Network Connections? And delete the directory? Or?

  Read the article

• Suggestions on providing HA access to an external (fibre) RAID subsystem

  - by user145198

  We are looking at upgrading our storage capacity with an external RAID subsystem that has redundant (2) fibre controllers, each controller has 4 x 8 Gbps fibre ports. I would like to make access to this storage system occur via HA Linux. Ideally I would connect 2 fibre ports from each controller into each Linux server, and then export either NFS or iSCSI via a 10 Gbe interface. I have seen plenty of references to DRBD, however all of those references tend to use block storage that is solely attached to each machine, rather than having a shared block storage device, so I am unsure if DRBD could (or should) be used in this case. Ideas?

  Read the article

• USB forwarding from dom0 to domU

  - by Karolis T.

  What are my options to forward two USB connected phones to xen guest? I've read about PCI-passthrough http://www.wlug.org.nz/XenPciPassthrough, but I'm sure usb controller in the server isn't a pci card. There's device level forwarding, but I need to forward two devices, this here doesn't say how to do it: http://www.olivetalks.com/2008/02/03/usb-forwarding-on-xen-it-just-does-not-work/ Would something as simple as: usbdevice = [ 'host:xxx', 'host:yyy', ] work? EDIT: I'm now starting a bounty. This is really important for me and for other people also, hoping someone who have this resolved will be able to help.

  Read the article

• IBM x260m won't boot from PCI SATA card

  - by syrenity

  Hi. We ghosted our old Windows 2003 drive to a new 1TB one, and connected through new PCI SATA card. The x260m server fails to boot with error 1962: "Boot sector not found." When we connect the drive directly to motherboard, it boots fine, so the problem is probably in getting BIOS to boot from the SATA card. Has anyone encountered and solved such issue? EDIT: We tried disabling the on-board Sata controller (Hostraid/SAS?), but there is no such option - only enable, enhanced and compatible. Tried also to chance boot device priority to all possible choices - no luck. Thanks in advance!

  Read the article

• Completely clean previous Radeon drivers on Windows 7 64bit

  - by tomo

  Recently I replaced my old Radeon HD 2600XT to Radeon HD 6770 from MSI. I had strange problem that after installing the newest Radeon drivers they exist only until first reboot. After reboot my new card is recognized as an old 2600. I tried to unintall ATI/AMD software completetely from Programs/Features, then reboot, then untinstall driver from device manager, then reboot, then system showed that display driver is regular VGA (and oldschool 640x480 resolutions). Then to be double sure I executed DriverCleaner3 and Driver sweeper. After the restart I installed the newest drivers from amd site but after restarting the system recognizes card as 2600. I'm completely lost. Perhaps Win7 64bit caches somewhere drivers? Are there any issues regarding drivers-shadowing or 32/64 mirroring? Reinstalling the system is not an option.

  Read the article

• Possible to use DRBD on two ESXi virtualized servers?

  - by chen

  I have two servers (attached disks have been set up as hardware RAID1 for disk device level failure resilience). Here is the setup in my mind: 1) Install ESXi on each of the physical server, M1, M2; 2) Start one VM on each of the ESXi virtualized physical server V1, V2; 3) Install the DRDB drivers within V1 and V2. Essentially, this is a "virtualizing machine running DRBD in the VM's instead of bare metal hardware" idea. My question is whether the above setup can achieve the same "networked RAID1" goal that DRDB can achieve in the bare-metal physical machines (http://www.drbd.org/). Thanks. [EDIT] I found this (http://serverfault.com/questions/49305/drbd-experimentation-and-virtualization) is a similar question, but the answer does not seem to be firmative enough for me to follow.

  Read the article

• Mounting both /dev/sda and /dev/sda1 - how can this be?

  - by itsadok

  I work on an Amazon EC2 instance that somebody else set up. We have an EBS volume mounted on /dev/sda, even though the root device is already on /dev/sda1, and we're also using `/dev/sda2' user@server:~$ mount /dev/sda1 on / type ext3 (rw) ... (snip) /dev/sda2 on /mnt type ext3 (rw) /dev/sda on /vol type xfs (rw,noatime) ... This doesn't seem to fit with what I know about the way /dev/ works. How is this possible, and more importantly: will this cause trouble in the future? I'm running ubuntu 9.04 jaunty.

  Read the article

• Mounting LVM2 volume with XFS filesystem

  - by Chris

  Unfortunately I'm not able to access the data on my NAS anymore. I can't figure out why this is the case as I haven't changed anything. So I plugged one of the harddisks in my computer to access the data. What I did: kpartx -a /dev/sdc Now I should be able to access /dev/mapper/vg001-lv001 When trying to mount it I get: sudo mount -t xfs /dev/mapper/vg001-lv001 /home/user/mnt mount: /dev/mapper/vg001-lv001: can't read superblock Now I did a parted -l which gave me Modell: Linux device-mapper (linear) (dm) Festplatte /dev/mapper/vg001-lv001: 498GB Sektorgröße (logisch/physisch): 512B/512B Partitionstabelle: loop Number Begin End Size Filesystem Flags 1 0,00B 498GB 498GB xfs Does anybody have a solution how to recover the data?

  Read the article

• Change Linux console screen blanking behavior

  - by quack quixote

  How do I change the screen blanking behavior on Linux virtual terminals? For example, if I switch to a VT from X, login, and leave the system alone for 5 minutes or so, the screen will blank like a screensaver. It comes back with any keypress, like a screensaver. Mostly I just want to change the timeout, but I'm also interested in other settings. If it helps, one of my systems is running Ubuntu 10.04 with the stock graphics drivers. fbset shows the console using the radeondrmfb framebuffer device.

  Read the article

• Solaris mounting partitions

  - by Benco

  I'm trying to mount a partition in solaris 10... bash-3.00# mount /dev/dsk/c0t0d0s3 /data mount: /dev/dsk/c0t0d0s3 is already mounted or /data is busy As far as I know c0t0d0s3 isn't already mounted elsewhere, so what's really going on here? From /etc/mnttab : /dev/dsk/c1t0d0s0 / ufs rw,intr,largefiles,logging,xattr,onerror=panic,dev=7800001285811136 /devices /devices devfs dev=4840000 1285811125 ctfs /system/contract ctfs dev=48c0001 1285811125 proc /proc proc dev=4880000 1285811125 mnttab /etc/mnttab mntfs dev=4900001 1285811125 swap /etc/svc/volatile tmpfs xattr,dev=4940001 1285811125 objfs /system/object objfs dev=4980001 1285811125 sharefs /etc/dfs/sharetab sharefs dev=49c0001 1285811125 /usr/lib/libc/libc_hwcap1.so.1 /lib/libc.so.1 lofs dev=780000 1285811131 fd /dev/fd fd rw,dev=4b40001 1285811136 swap /tmp tmpfs xattr,dev=4940002 1285811137 swap /var/run tmpfs xattr,dev=4940003 1285811137 -hosts /net autofs nosuid,indirect,ignore,nobrowse,dev=4c00001 1285811148 auto_home /home autofs indirect,ignore,nobrowse,dev=4c00002 1285811148 cordb:vold(pid530) /vol nfs ignore,noquota,dev=4bc0001 1285811149 I suspect the problem is not related to the mount point, but rather the disk slice I'm trying to mount: bash-3.00# newfs -v /dev/dsk/c0t0d0s3 /dev/rdsk/c0t0d0s3: Device busy

  Read the article

• User account automatically filling up with dead.letter file

  - by jeroen

  I have one user account on a server with about 400 accounts that is filling up automatically. The dead.letter file in the users home directory automatically grows until the account is full (about 10 - 40 Mb per day). The user is using Microsoft Outlook to send and receive mail. What can be causing this and how can I avoid it from happening? Right now I have an emergency cron-job to delete the file but I would like "real" solution. Edit: The server version is Red Hat Enterprise Linux ES release 4 (Nahant Update 4) Edit 2: It seems mainly spam and I see different mailer headings (from php to Outlook Express) and a frequent appearing header is [email protected].loop Update: I have asked the hosting provider where I use that dedicated server to look into the problem as well, as it's their Control Panel that could be a cause of the problem.

  Read the article

• Monitor Bonded Interface for Disconnection

  - by bradlis7

  I am trying to monitor for network failures on a machine, and one portion of that is to monitor interfaces that are intended to be active also be "RUNNING". An Ethernet port, such as eth0, will say "RUNNING" if it is physically connected to another device. The problem lies in the bonded interfaces, such as bond0. If all of the ethernet devices are disconnected, it still says that it is running, and it is still pingable. Is this by design, or is my system setup incorrectly? Does the miimon option have something to do with this?

  Read the article

• Good quality voice communication software over Internet for windows

  - by ORA600

  I regularly attend over-the-phone meetings, where is a polycom/polispan device on the other side. The quality of the sound is bad, even those whose English is a first language sometimes are struggling to realize what is being said on the other side. I understand this is because of too aggressive audio compression in the line. Does anyone know any good audio chat software which does not over-compress audio stream. The IP channel between two offices is wide enough. In other words, you should be able to listen to a music (not only a speech) from the remote side with good quality. So, Skype is too over-compressing as well. Does anyone know anything like that?

  Read the article

• How would you measure the amount of atmospheric dust in a server room?

  - by Tom O'Connor

  We've been advised by our tape library vendor that one of the reasons we might be seeing lots of errors is if our server room is particularly dusty. It doesn't look dusty, but that's not to say it's not there. We've got an environment sensor cluster which measures Temperature, Airflow and Relative Humidity. I should probably point out that the low-hanging fruit solution I came up with is to use Sellotape (scotch tape) in a loop, one side stuck to the server cabinet, the other side free-hanging. I've also put a couple of other tape loops by the exit and intake fans of the hardware (not blocking airflow, naturally). How can we (electronically, ideally) measure dust levels?

  Read the article

• CentOS and Broadcom Wireless Drivers

  - by Sami

  Hi, I'm tired of reading, tired of trying to find a solution myself, that's why I decided to post my question. I'm following tutorial located at CentOS Wiki to install driver for my wifi device. However, I'm facing strange error at the begining of the process. make -C /lib/modules/`uname -r`/build/ M=`pwd` make: *** /lib/modules/2.6.18-194.11.3.el5PAE/build/: File not found Does anyone know what I'm doing wrong? This is first time when I try to install Linux on my laptop.

  Read the article

• Cloning a linux system from sdx to cciss

  - by churnd

  I have an HP ML 310 server running CentOS Linux 5.5. I'm buying a RAID card (LSI 9260-8i) to set up a mirrored OS drive. Right now, the boot drive is set up with GRUB installed on the MBR of /dev/sda & has a 100MB /boot partition for /dev/sda1, then the rest is configured in LVM with a 20GB with a 20GB VG for the root partition & ~80GB VG for home. The new disk sizes will also be slightly larger as well. What is the best way to clone the boot drive to the new CCISS device?

  Read the article

• mod_rewrite directory path to deeper directory

  - by DA.

  I don't usually work with LAMP and am a bit stumped getting a site working locally. The site is set up to be used via localhost: 1) http://localhost/mysite However, the way the site files are physically on the server the root is located as such: 2) /var/www/mysite/trunk/site I'm trying to figure out a way where I could type #1 but have apache actually looking for the files in #2 so that all of the asset/page links in the web application work. Is mod_rewrite the solution? If so, I'm stumped on the syntax. I have this but it won't work (due, I assume, to it causing an infinite loop) RewriteRule ^mysite/ mysite/trunk/site I have a hunch I need to sprinkle on some regex?

  Read the article

• Setup IPv6 over IPv4 tunnel in VPN

  - by bfmeb

  Let me explain my szenario: I have a linux server A. A is reachable in a VPN. So if I am connected to the VPN over Internet I can successfully ping A. Server A is connected to a Router B. Router B has a local ipv6 address and there are resources (each of them with a local ipv6 address) connected to Router B. After I am connected to VPN, I am able to use ssh to have access over A. Now I can use the ping6 command to ping the Router B or one of its connected resources. This works fine. The ping fails if I try to ping router B on my computer. Overview: My Computer -- VPN -- Server A(ipv4) -- Router B(ipv6) -- Ressource A(ipv6) On resource A runs for example a HTTP-Server. My question is: How can I access Resource A (for example with HTTP) on my to VPN connected computer? Is it possible? Should I setup a tunnel device? Sorry for this inexpertly explanation, but I am new to network stuff!

  Read the article

< Previous Page | 431 432 433 434 435 436 437 438 439 440 441 442  | Next Page >