Search Results

Search found 14015 results on 561 pages for 'extended desktop'.

Page 437/561 | < Previous Page | 433 434 435 436 437 438 439 440 441 442 443 444  | Next Page >

• Ubuntu 12.04 LTX Install Problems (See post for system build details.)

  - by Lokitez

  This is my first ever attempt at working with Ubuntu. I have only ever installed Windows in the past and that may be the problem. I purchased all new hardware this week and I would really like to give Ubuntu a chance (especially since I don't want to buy another Windows license). First, the hardware: AMD FX-8150 Zambezi 3.6GHz Socket AM3+ 125W Eight-Core Desktop Processor ASUS Crosshair V Formula AM3+ AMD 990FX SATA 6Gb/s USB 3.0 ATX AMD Gaming Motherboard SAMSUNG 830 Series MZ-7PC128D/AM 2.5" 128GB SATA III MLC Internal Solid State Drive (SSD) - This is my intended boot drive. Western Digital VelociRaptor WD5000HHTZ 500GB 10000 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive - This is a backup drive that I have installed Windows Vista on until I can get Ubuntu to work. G.SKILL Ripjaws X Series 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) ASUS HD7850-DC2-2GD5 Radeon HD 7850 2GB 256-bit GDDR5 PCI Express 3.0 x16 I have downloaded and tried to install both Ubuntu 64 bit and Kubuntu 64 bit (both 12.04). Both will always fail to copy a file during install or otherwise lockup during install to the SSD. I have burned two copies of the Ubuntu 12.04 and had the install fail with both. I have installed Vista onto the HDD. Is it possible to mount the Ubuntu file into

  Read the article

• Duplicated menu, panel indicators and taskbar

  - by Mykro

  Ubuntu 12.04. The first time I log into Gnome Classic I get a duplicate of every menu, panel indicator and taskbar entry. If I log out and back in again I now have three copies. Log out and log in, four copies and so forth. What would cause this? I can't see any obvious duplicates in the process list: $ ps -A | grep 'gno\|org\|nau' 27439 tty7 00:00:18 Xorg 27610 ? 00:00:00 gnome-keyring-d 27621 ? 00:00:00 gnome-session 27674 ? 00:00:00 gnome-settings- 27709 ? 00:00:07 gnome-panel 27720 ? 00:00:00 gnome-fallback- 27726 ? 00:00:04 nautilus 27736 ? 00:00:00 polkit-gnome-au 28281 ? 00:00:00 gnome-screensav 29016 ? 00:00:00 gnome-terminal 29021 ? 00:00:00 gnome-pty-helpe If it helps, I was recently trying the Nouveau drivers but have now reverted to NVIDIA. Configuration is Separate X Window, Xinerama enabled. Unity is fine, so the problem is limited to the Classic desktop. I haven't had any luck googling these particular symptoms so any tips would be really appreciated. Thanks!

  Read the article

• Why is Ubuntu unmounting my primary hard drive?

  - by Twisol

  I'm running Ubuntu 10.10 on my laptop (an Asus G73j), dual-booting Windows 7 if that matters. After using the computer for couple of hours or so, I get a popup complaining that a file was unmounted, then my GNOME desktop panels disappear. I can't save any unsaved work (the file browser shows "Filesystem" as totally empty), and other programs break in odd ways (like Chrome can't browse to any new pages, but keeps current ones going... at least I still have Pandora to listen to when this happens!). I've tried looking in the system logs to no avail; I'm assuming that it can't write any errors to the logs because, of course, the logs are on the primary hard drives. This started happening maybe a few days ago. Yesterday I upgraded from 10.4, but I believe it was happening before then. Any advice for figuring this out? EDIT: It just happened again, and I heard a small little clicky sound from the hard drive about five seconds before things went south. I'm thinking I should start backing up ASAP. In response to a comment, here's the dmesg output: http://askubuntu.pastebin.com/uYGshBay Also, the SMART status says the disk has a few bad sectors, and the detailed data says there are 14. It says it passed the self-assessment though. Lastly, this doesn't seem to be happening when I'm on Windows. I recently re-enabled ureadahead (which I disabled ages ago because it was causing Ubuntu to hang at the startup logo), could that be the source of the problem? I've disabled it again to see.

  Read the article

• How to make backlight work on Acer 5732z?

  - by Dude Random21

  I want to run 12.04 on my Acer Aspire 5732z. I know from research that these computers have issues with the backlight on Ubuntu. So I tried a couple of solutions: The sudo lightdm restart method. I get no change at all. The sudo setpci -s 00:02.0 F4.B=30 method. This so far has been the most effective. I first tried it in the F1 console, right away I get the screen back, problem is going back to the desktop it goes back to being black. So I tried it from a terminal window and it works as well but as soon as I unplug my external monitor the screen turns black again and doesn't come back. If I plug the monitor back in the screen stays black and the only thing I see is the mouse pointer. From here I go back into console (which I am able to see) and reboot from there. The sudo sed -i 's/GRUB_CMDLINE_LINUX=""/GRUB_CMDLINE_LINUX="acpi_osi=Linux"/g /etc/default/grub method. This one I got no instant change and after reboot still no change. I'm open to pretty much any suggestions you may have.

  Read the article

• Computer Says No: Mobile Apps Connectivity Messages

  - by ultan o'broin

  Sharing some insight into connectivity messages for mobile applications. Based on some recent ethnography done my myself, and prompted by a real business case, I would recommend a message that: In plain language, briefly and directly tells the user what is wrong and why. Something like: Cannot connect because of a network problem. Affords the user a means to retry connecting (or attempts automatically). Mobile context of use means users use anticipate interruptibility and disruption of task, so they will try again as an effective course of action. Tells the user when connection is re-established, and off they go. Saves any work already done, implicitly. (Bonus points on the ADF critical task setting scale) The following images showing my experience reading ADF-EMG Google Groups notification my (Android ICS) Samsung Galaxy S2 during a loss of WiFi give you a good idea of a suitable kind of messaging user experience for mobile apps in this kind of scenario. Inline connection lost message with Retry button Connection re-established toaster message The UX possible is dependent on device and platform features, sure, so remember to integrate with the device capability (see point 10 of this great article on mobile design by Brent White and Lynn Hnilo-Rampoldi) but taking these considerations into account is far superior to a context-free dumbed down common error message repurposed from the desktop mentality about the connection to the server being lost, so just "Click OK" or "Contact your sysadmin.".

  Read the article

• Install Ubuntu side by side with Windows

  - by Igal

  I'm trying to setup both Windows 7 and Ubuntu 14.04 Desktop on the same machine. I've partitioned the disk into 3 parts, so that I can have Windows Ubuntu Shared Partition for Files I've installed Windows 7 on the first partition (which created a small partition of 100MB for boot), so now I have 4 partitions on the disk which is all it can take. Now I am installing Ubuntu, and it's asking me whether I want to: Install Ubuntu inside Windows 7 Replace Windows 7 with Ubuntu (No!) Something else I want the Ubuntu installation to go into the partition that I prepared for it. Should I choose "Something else"? If I do so -- will I be able to choose which OS to load at boot? Can anyone explain how "Ubuntu inside Windows" work? it says that it will allow me to choose which OS to load at boot, which is desired. UPDATE: When choosing "Something else" I see also an option for Device for Boot Loader Installation: /dev/sda -- the ssd disk itself /dev/sda1 -- the Windows 7 loader (100MB partition) /dev/sda4 -- which is one of the other partitions Which one should I choose there? TIA!

  Read the article

• Wallpapers of only some users being dynamically loaded in LightDM

  - by Kazark

  As this answer explains: Ubuntu 12.04 Unity greeter has introduced selected user dynamic background, that means that when selecting a user from the available users list the background will change to reflect the selected user's desktop background. However, I am puzzled, because in my experience this isn't consistently true. On one of my family members' computers, where there are three users, only one of the users' background shows in LightDM. None of the users are newly created. The user whose background is showing has a custom background; one of the users whose background doesn't show also does; and the other one who doesn't has the default switching wallpaper set. It is not a clean install but has been incrementally upgraded from about 8.04. Any idea what could be happening? This is a similar question, though we're also having the opposite problem (default wallpapers not showing). (I do not have access to the computer mentioend above at the moment; when I do I will use some of the criteria given there to analyze the problem further.)

  Read the article

• Help w/ iPad 1 performance for tile-based DOM Javascript game

  - by butr0s

  I've made a 2D tile-based game with DOM/Javascript. For each level, the map data is loaded and parsed, then lots of tiles ( elements) are drawn onto a larger "map" element. The map is inside of a container that hides overflow, so I can move the map element around by positioning it absolutely. Works a treat on desktop browsers, and my iPad 2. My problem is that performance is really bad on iPad 1. The performance hit is directly related to all the tile elements in my map, because when I remove or reduce the number of tiles drawn, performance improves. Optimizing my collision detection loop has no effect. My first thought was to batch groups of tiles into containers, then hide/show them based on proximity to the player, however this still causes a huge hiccup when the player moves and a new group of tiles is displayed (offscreen). Actually removing the out-of-sight elements from the DOM, then re-adding them as necessary is no faster. Anyone know of any tips that might speed up DOM performance here? My map is 1920 x 1920 pixels, so as far as I know should be within the WebKit texture limit on iOS 5/iPad. The map is being moved with CSS3 transforms, and I've picked all the other obvious low-hanging fruit.

  Read the article

• Anyone can suggest some Game Frameworks for GNU/Linux? [closed]

  - by dysoco

  So I've been developing a little bit with XNA + C# in Windows, not really much: just some 2D stuff, but I've found that XNA is a really good framework. I'm a GNU/Linux user, and I'm definitely migrating my desktop to Gentoo Linux (I've been using Arch in my laptop for a while now). But, of course, I need a C# + XNA alternative... I'm not really an expert in any language, so I can really pick up anything (except, maybe, Functional ones), I prefer C-Like languages like Java or Ruby, I tried Python but found the Whitespace syntax confusing. I would like to hear some of you'r suggestions, I'm not asking for "the best", but for "some suggestions", so I think this is objective enough. Probably you're going to suggest C++ + SDL, but I would prefer something more "High Level" like XNA, but I'm open to discuss anything. So... any ideas ? Note: I think this questions meets the guidelines for this site, if it doesn't: please not only downvote this question, but comment on what can I do to improve it. Thanks. PS: 2D Games, not 3D

  Read the article

• Is it worth replacing mouse by standalone trackpad for heavy code-editing? [on hold]

  - by heltonbiker

  I recently got more interested in improving my tools, workspace and worflow. The first sting came with a sore finger due to a crappy keyboard, and then after some research I fell in love with the "mechanical keyboard is what you need" doctrine, bought one (cherry MX Brown if you're curious), and am very happy with the results. Currently I am replacing my previous text editor (Geany) with Sublime Text 3, and am also very happy and feeling much more powerful and professional :) Well, but while I re-read all the ancient debates about VIM vs whatever-else, the following excerpt from a blog post got me thinking again about the mouse vs keyboard, and the "moving around from the very home row" (in VIM) versus gesturing away with the tiny and unstable mouse cursor: Reaching for a mouse may indeed slow you down, but developers are commonly on machines where the trackpad is a micro-hand movement away. Most novice programmers can click on a character on screen faster than an expert Vimmer can type 20jFp; or LkEEE or /word or any other nasty way Vimmers have to use. The point of a mouse is to make arbitrary on screen jumps efficient, and it’s very good at doing that. Don’t you ever think you can beat a mouse. Well, although there is some bitterness in this statement, it makes a lot of sense, and EVEN MORE if you consider your direct input to be a TRACKPAD conveniently placed in front of your spacebar (which oddly is where I like to put my mouse, rotated 90° ccw, due to a serious tendonitis in my right shoulder, already healed, but you knod...). So, the question is: Has anyone replaced mouse by a standalone trackpad, to work in code editing in a desktop machine (that is, with a sandalone keyboard)? Was it worth the change?

  Read the article

• Ubuntu 11.10 won't let me login; it kicks me back to login screen

  - by zlyfire

  I was just copying files from my external HDD to my .wine directory, when I noticed the place where the launchers are (Unity desktop) was getting fuzzy and holding onto graphics from the things in the location prior(i have it autohide when a window covers it). I assumed it was just RAM problem, so I canceled the copying, since it wasn't actually important. The glitch remained, and so did another; very slow response time. The mouse moved just fine, but windows were waiting about a minute after I hit the x button to close or even switch active window. Once again, I blamed RAM (only have 2 GBs) so I restarted. Usually, it autologs me into my account, since I'm the only user, but this time it presented me with the login screen. I thought it odd, but tried to log in. A black screen with some text pops up (assuming terminal screen) for half a second then kicks me back to the login screen. I tried the guest account and no luck. I went into terminal (alt+ctrl+f1) and logged in and it worked. I deleted .Xauthority, made new account, and even rebooted quite a few times, all to no avail. Anyone have an idea?

  Read the article

• Career advice on whether to stick with coding or move on to tech. lead\management [closed]

  - by flk

  I'm at a point in my career where I need to decide what to do next. I've mainly done C# desktop development (with a little python and Silverlight) for 5 or 6 years and I'm trying to decide whether to start learning JavaScript\HTML or to moving into a role where I do less coding and more tech. lead\management role. With all the talk around HTML5\JavaScript, the rise of mobile and the changes with Windows 8 (metro at least) I wonder if I should stick with coding to get some experience in these areas before moving on. But at the same time if I decide stick with coding for a ‘couple more years’ I will probably be faced with the same situation with some other new\interesting technology that I feel I should learn before moving on. I feel if I stick just with coding I'm limiting my career options but if I move to tech. lead\management I will loose my coding skills. Is going one direction or the other going to limiting my career options in the future? I know that there is no real answer to this question so I’m really just looking for some thoughts from others and perhaps experiences from other people that faced similar situations. Thanks

  Read the article

• How to modify partitions after install?

  - by ChocoDeveloper

  I wanted to have Ubuntu with full disk encryption on one big partition, and Windows on a small one. In 12.04, only the Server Edition installer has full disk encryption, so I used that and then installed ubuntu-desktop. When it asked for the size, I reduced it from ~999GB to ~750gb. Now after the install, on both gparted and disk utility I see /dev/sda2 taking ~931GB, and nothing unallocated, so I can't create a partition for windows. I got the size right, because when I right-click inside a folder, then hit 'properties', I see Free space: ~690GB (I don't know why it's not ~750GB, but at least it's not 900). The command df -h shows the same. So what can I do? Normally I would just resize a partition with gparted to create unallocated space, then create the partition. But here I have two problems: gparted does not seem to be showing the correct values, and also it says it does not support LUKS so I'm afraid it will mess things up. Any thoughts?

  Read the article

• Dual displays not working with Xinerama in Ubuntu 12.04

  - by user68489

  I just upgraded from Ubuntu 10.10 to 12.04. I had been using a display configuration just like the one described at http://bitkickers.blogspot.com/2009/08/rotate-just-one-monitor-with.html without any problems under 10.10. I have an nvidia Quadro FX 380 and have upgraded to the latest drivers (295.49). Everything appears to be fine when the system first boots up. However, after logging in, the left screen goes black, and the right screen displays what should be displayed on the left screen. Logging into Ubuntu 2D somewhat improves things. The left screen correctly displays the left portion of the desktop but the right screen contains a duplicate view of the left screen. Turning off Xinerama and enabling TwinView appears to fix the issues but does not allow the right monitor to be rotated. Since the display problems start to occur only after logging on, I thought it might have to do with carryover user configuration from 10.10 but the problems persist even when logging in as a guest. Clicking on System Settings - Displays results in the error message "Could not get screen information - RANDR extension is not present." Any help would be greatly appreciated.

  Read the article

• Network printer problem with 12.04

  - by G. He

  I had an HP LaserJet 3030 printer connected to an Ubuntu box. It worked fine with 11.10. I was able to print from Ubuntu as well as from Windows and Mac from the home network. About a month or so ago, I upgraded 11.10 to 12.04, then things started to falling apart. My Windows 7 laptop couldn't print to the printer any more. Today, I installed many updates on 12.04, hoping that would fix the printing problem. Unfortunately, it made the situation much worse. Now not only my Windows 7 laptop won't print, my XP desktop won't print either. Every time I print something from the Windows computer, the Ubuntu box logs an error message in /var/log/samba/log.'machineName' as: _spoolss_OpenPrinterEx: Cannot open a printer handle for printer \\server. It is interesting that it uses the server name as the printer, not the \\server\xyzprinter as the printer name. Anyone had a similar problem? Anyway to work around the problem?

  Read the article

• How do I turn off PCI devices?

  - by ethana2

  With the purchase of an Intel SSD and 85WHr Li-ion battery and the linking of wifi and bluetooth to my laptop's wireless switch, extensive Intel PowerTop usage, switching from compiz to metacity, stopping of the desktop-couch daemon, removal of Ubuntu One and several other services from my startup, disabling of everything possible in my BIOS, and physical removal of my optical drive, I've gotten my battery life up fairly high, but I think there's still more to be done. Specifically, when I'm in class taking notes, I want to temporarily but completely power down: Ethernet Firewire USB ports SD card reader Optical drive Webcam Sound card PCMCIA slot ..without turning them off in my BIOS like they are now, if possible, because then I have to restart my computer to use any of them. As it stands, I still haven't managed to power down: Firewire USB connection to webcam sound card How do I tell Linux to disable and power down these devices? Is it true that any PCI slot can be physically powered down? My current idle power consumption is 7.9 watts plus the screen. (10.0W at min. brightness) Also, how do I set the screen timeout to ten seconds? gconf editor isn't honoring it when I set it to that. Will switching from nVidia to Nouveau save any significant amount of power?

  Read the article

• Advanced Experiments with JavaScript, CSS, HTML, JavaFX, and Java

  - by Geertjan

  Once you're embedding JavaScript, CSS, and HTML into your Java desktop application, via the JavaFX browser, a whole range of new possibilities open up to you. For example, here's an impressive page on-line, notice that you can drag items and drop them in new places: http://nettuts.s3.amazonaws.com/127_iNETTUTS/demo/index.html The source code of the above is provided too, so you can drop the various files directly into your NetBeans module and use the JavaFX WebEngine to load the HTML page into the JavaFX browser. Once the JavaFX browser is in a NetBeans TopComponent, you'll have the start of an off-line news composer, something like this: WebView view = new WebView(); view.setMinSize(widthDouble, heightDouble); view.setPrefSize(widthDouble, heightDouble); webengine = view.getEngine(); URL url = getClass().getResource("index.html"); webengine.load(url.toExternalForm()); webengine.getLoadWorker().stateProperty().addListener( new ChangeListener() { @Override public void changed(ObservableValue ov, State oldState, State newState) { if (newState == State.SUCCEEDED) { Document document = (Document) webengine.executeScript("document"); NodeList list = document.getElementById("columns").getChildNodes(); for (int i = 0; i < list.getLength(); i++) { EventTarget et = (EventTarget) list.item(i); et.addEventListener("click", new EventListener() { @Override public void handleEvent(Event evt) { instanceContent.add(new Date()); } }, true); } } } }); The above is the code showing how, whenever a news item is clicked, the current date can be published into the Lookup. As you can see, I have a viewer component listening to the Lookup for dates.

  Read the article

• Kubuntu not showing eth0

  - by Laurbert515

  I just installed Kubuntu 12.04.2 and do not have an internet connection. I also cannot access the Desktop and only have the terminal. When I enter xlcock I get Error: Can't open display:. I believe this is because I do not have the correct drivers and need to download them ... using the internet which I can't access. So here's what's going on ... ifconfig gives: lo Link ecap: Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overrruns:0 frame:0 TX packets:16 errors:0 dropped:0 overrruns:0 frame:0 collisions:0 txqueuelen:0 RX bytes:1296 (1.2 KB) TX bytes:1296 (1.2 KB) wlan0 Link encap: Ethernet HWaddr 68:17:29:58:49:4a UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:16 errors:0 dropped:0 overrruns:0 frame:0 TX packets:16 errors:0 dropped:0 overrruns:0 frame:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lspci -nnk gives: 07:00.0 Network Controller [0280] Intel Corporation Centrino Wireless-N 2230 [8086:0887] (rev c4) Subsystem: Intel Coporation Centrino Wireless-N 2230 BGN [8086:4062] Kernel driver in use: iwlwifi Kernel modules: iwlwifi 0d:00.0 Ethernet Controller [0200]: Atheros Communications Inc. AR8161 Gigabit Ethernet [1969:1091] (rev 10) Subsystem: Toshiba America Info Systems Device [1179:fa77] I believe this means that it is using the ethernet connection but thinks it is a wireless connection. sudo lshw -class network gives: *-network description: Wireless interface product: Centrino Wireless=N 2230 ... *network UNCLAIMED description: Ethernet controller product: AR8161 Gigabit Ethernet I want to get the internet working so I can fix the GPU driver, etc. but I can't seem to get it working even though I have my ethernet cable plugged in (and I'm sure it is working).

  Read the article

• How can I install from a 9.04 live USB/DVD?

  - by bstpierre

  I have a 9.04 (Jaunty) ISO burned to a USB stick; it appears to be a "live DVD". When I boot from it, I get a GRUB menu listing: Ubuntu, with Linux 2.6.35-generic (This matches the system currently installed on the HDD?) Ubuntu, with Linux 2.6.35-generic (recovery mode) Memory test Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda1) Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode) (on /dev/sda1) Ubuntu 9.04, memtest86+ (on /dev/sda1) When I select Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda1), I arrive at the desktop of a 9.04 system. I want to wipe the HDD clean and install 9.04. (Upgrading to something newer is not an option; this version is required by a legacy application.) How can I install from this live USB image? I vaguely remember some incantation that I should be able to use in the booted system, but my google-fu is broken at the moment. I'm comfortable with low-level commands, so if you want to recommend a more hard-core strategy, I'm willing to roll with it without requiring a ton of detail...

  Read the article

• Access Control Service: Walkthrough Videos of Web Application, SOAP, REST and Silverlight Integration

  - by Your DisplayName here!

  Over the weekend I worked a little more on my ACS2 sample. Instead of writing it all down, I decided to quickly record four short videos that cover the relevant features and code. Have fun ;) Part 1 – Overview This video does a quick walkthrough of the solution and shows the web application part. This includes driving the sign in UI via JavaScript (thanks Matias) as well as the registration logic I wrote about here. watch Part 2 – SOAP Service and Client The sample app also exposes a WCF SOAP service. This video shows how to wire up the service to ACS and hows how to create a client that first requests a token from an IdP and then sends this token to ACS. watch Part 3 – REST Service and Client This part shows how to set up a WCF REST service that consumes SWT tokens from ACS. Unfortunately there is currently no standard WIF plumbing for REST. For the service integration I had to combine a lot of code from different sources (kzu, zulfiq) as well as the WIF SDK and OAuth CTPs together. But it is working. watch Part 4 – Silverlight and Web Identity Integration This part took by far the most time to write. The Silverlight Client shows ho to sign in to the application using a registered identity provider (including web identities) and using the resulting SWT token to call our REST service. This is designed to be a desktop (OOB) client application (thanks to Jörg for the UI magic). watch code download

  Read the article

• How do I get a different type of scrollbars in 12.04? [closed]

  - by Joseph Garvin

  Possible Duplicate: How do I disable overlay scrollbars? By default 12.04 uses overlay scroll bars that do not suit my taste, and every method I've found so far of disabling them makes them broken in a different way. When I was using 11.10 this wasn't a problem because I could still change the GTK theme. In 12.04, the Appearance settings only contain a few stock themes, and other than the special purpose contrast ones they all have the overlay scroll bars. If I aptitude search gtk3 | grep theme I get no results so there appears to be no packaged alternative either. Most suggestions I've seen for disabling the overlay scroll bars involve uninstalling packages or editing files as root. I want to disable them just for the current user, not for everyone on the whole box; as should be the case for any theme/display setting. There is a gsettings command that temporarily disables the overlay scrollbars just for the current user, but this has two problems of its own: The setting doesn't stick after log off. Because who would want to save settings? The scroll bars put in place have no contrast. They have a black scroller on a black background and are completely unusable. In short what I'd like to know is how to disable overlay scroll bars such that: My preference is user specific. My preference is actually saved. The scroller can actually be seen against the background without having to use a special high contrast theme that makes my whole desktop look like a negative photo from Tron.

  Read the article

• Can I upgrade my ubuntu version and change to be primary OS after originally installing with Wibu?

  - by Garrick Wann

  I have recently installed Ubuntu 12.04 using Wubi 12.04 and I now wish to upgrade to a full installation of Ubuntu 14.04, Before attempting to upgrade through the update center I did some research on upgrading from a Wubi installation (alongside windows) to a full installation making Ubuntu primary and only OS and found that it is in fact doable through the update center however it is just highly recommended to perform a full backup before doing so. I have now finished backing up all the data I need to worry about and began the upgrade process through the update center and received the following error: Your graphics hardware may not be fully supported in Ubuntu 14.04. Running the 'unity' desktop environment is not fully supported by your graphics hardware. You will maybe end up in a very slow environment after the upgrade. Our advice is to keep the LTS version for now. For more information see https://wiki.ubuntu.com/X/Bugs/UpdateManagerWarningForUnity3D Do you still want to continue with the upgrade? My questions are as follows: A. Isnt 14.04 a LTS version??? B, What are your recomendations in order to ensure my graphics driver is installed correctly and im not stuck with bad configs/install?

  Read the article

• installing linux froom usb pen drive

  - by zulu

  I'm new to Linux. I'm using Ubuntu 11.04. Now i want to install Ubuntu 12.04 . I got an ISO image of Ubuntu 12.04 Desktop. I put this image in to a pen drive which is formated,set the boot option boot from usb but nothing happened . I searched this over the net and on Ubuntu website but nobody has given the complete steps . someone say u can install from the Ubuntu also ,someone says u can do a fresh installation from usb pen drive u need to make you pen drive bootable etc. etc. . My problem is that i don't know the exact steps how ton install Ubuntu from usb pen drive? All I want to do is to completely remove my Ubuntu 11.04 and install Ubuntu 12.04 from usb pen-drive. Can any body tell me how to make a pen drive bootable ? How to install Ubuntu 12.04 from pen-drive? Please give me a step by step procedure. please explain me how to do it step by step . Thanx in advance

  Read the article

• How to properly uninstall/reinstall Ubuntu One on Windows XP?

  - by user73303

  I had previously installed an Ubuntu One client as a test on a Windows XP machine. Now I wanted to change the account for the client to a production one but had problems changing the email address so decided to do a reinstall. Ran uninstall. Downloaded ubuntuone-3.0.2-windows-installer.exe. It downloads, goes through the unpacking/install – strangely some of the messages say updating as if it was replacing something that was already there. I do not get the setup/signin screen. There is no ubuntu% processes running. The Program files/ubuntuone directory exists with data and dist folders. The U icon is on the desktop – pointing at ubuntuone/dist/ubuntuone-control-panel-qt.exe but this does not run. Ran uninstall again, deleted Program files/ubuntuone directory, removed any ubuntu entries for registry, rebooted. Downloaded install again - exactly the same as above. How can I uninstall Ubuntu One to get a clean reinstall? Or force the install to continue after downloading/unpacking?

  Read the article

• How do I upgrade from ubuntu 9.10 to 12.10 on my Acer Aspire 3000

  - by 770

  I had my Acer Aspire 3000 as a dual boot XP/ubuntu 9.10 a couple years ago. I recently blew the dust of it and wanted to upgrade to 7/Ubuntu 12.10 so I began by formatting the Ubuntu side of the partition and apparently damaged the mbr as I could only get black screen with the error message: GRUB loading. error: no such partition grub rescue I then slaved the hdd to my win7 desktop and formatted the entire drive, both sides of the partition then reinstalled it in the Acer and tried to install win7. Upon starting the Acer I got the same error message: GRUB loading. error: no such partition grub rescue I then tried to reinstall Ubuntu 9.10 as I have an Ubuntu produced installation cd. Same result. Next day I received a new battery I had ordered for the Acer. I plugged it and the power supply in and hit the power button just to see if I at least could charge the battery but to my surprise Ubuntu 9.10 began to install, so I let it and it did. Now the hard drive shows 58 gb and 2.5gb partitions neither of which is formatted NTFS for/by windows. I am guessing that the GRUB/mbr was repaired somehow by the Ubuntu reinstallation. My question, should you choose to accept it; How can I get to my goal of dual boot win7/Ubuntu 12.10. I am a beginner and don't know much about linux or the terminology. Thank you for your thoughts and help.

  Read the article

< Previous Page | 433 434 435 436 437 438 439 440 441 442 443 444  | Next Page >