Search Results

Search found 20116 results on 805 pages for 'network flow'.

Page 439/805 | < Previous Page | 435 436 437 438 439 440 441 442 443 444 445 446  | Next Page >

  • Code review recommendations and Code Smells

    - by Michael Freidgeim
    Some time ago Twitter told that I am similar to Boris Lipschitz . Indeed he is also .Net programmer from Russia living in Australia. I‘ve read his list of Code Review points and found them quite comprehensive. A few points  were not clear for me, and it forced me for a further reading.In particular the statement “Exception should not be used to return a status or an error code.” wasn’t fully clear for me, because sometimes we store an exception as an object with all error details and I believe it’s a valid approach. However I agree that throwing exceptions should be avoided, if you expect to return error as a part of a normal flow. Related link: http://codeutopia.net/blog/2010/03/11/should-a-failed-function-return-a-value-or-throw-an-exception/ Another point slightly puzzled me“If Thread.Sleep() is used, can it be replaced with something else, ei Timer, AutoResetEvent, etc” . I believe, that there are very rare cases, when anyone using Thread.Sleep in any production code. Usually it is used in mocks and prototypes.I had to look further to clarify “Dependency injection is used instead of Service Location pattern”.Even most of articles has some preferences to Dependency injection, there are also advantages to use Service Location. E.g see http://geekswithblogs.net/KyleBurns/archive/2012/04/27/dependency-injection-vs.-service-locator.aspx. http://www.cookcomputing.com/blog/archives/000587.html  refers to Concluding Thoughts of Martin Fowler The choice between Service Locator and Dependency Injection is less important than the principle of separating service configuration from the use of services within an applicationThe post had a link to excellent article Code Smells of Jeff Atwood, but the statement, that “code should not pass a review if it violates any of the  code smells” sound too strict for my environment. In particular, I disagree with “Dead Code” recommendation “Ruthlessly delete code that isn't being used. That's why we have source control systems!”. If there is a chance that not used code will be required in a future, it is convenient to keep it as commented or #if/#endif blocks with appropriate explanation, why it could be required in the future. TFS is a good source control system, but context search in source code of current solution is much easier than finding something in the previous versions of the code.I also found a link to a good book “Clean Code.A.Handbook.of.Agile.Software”

    Read the article

  • Diagram to show code responsibility

    - by Mike Samuel
    Does anyone know how to visually diagram the ways in which the flow of control in code passes between code produced by different groups and how that affects the amount of code that needs to be carefully written/reviewed/tested for system properties to hold? What I am trying to help people visualize are arguments of the form: For property P to hold, nd developers have to write application code, Ca, without certain kinds of errors, and nm maintainers have to make sure that the code continues to not have these kinds of errors over the project lifetime. We could reduce the error rate by educating nd developers and nm maintainers. For us to be confident that the property holds, ns specialists still need to test or check |Ca| lines of code and continue to test/check the changes by nm maintainers. Alternatively, we could be confident that P holds if all code paths that could violate P went through tool code, Ct, written by our specialists. In our case, test suites alone cannot give confidence that P holdsnd » nsnm ns|Ca| » |Ct| so writing and maintaining Ct is economical, frees up our developers to worry about other things, and reduces the ongoing education commitment by our specialists. or those conditions do not hold, so focusing on education and testing is preferable. Example 1 As a concrete example, suppose we want to ensure that our web-service only produces valid JSON output. Our web-service provides several query and mutation operators that can be composed in interesting ways. We could try to educate everyone who maintains those operations about the JSON syntax, the importance of conformance, and libraries available so that when they write to an output buffer, every possible sequence of appends results in syntactically valid JSON. Alternatively, we don't expose an output stream handle to application code, and instead expose a JSON sink so that every code path that writes a response is channeled through a JSON sink that is written and maintained by a specialist who knows JSON syntax and can use well-written libraries to produce only valid output. Example 2 We need to make sure that a service that receives a URL from an untrusted source and tries to fetch its content does not end up revealing sensitive files from the file-system, like file:///etc/passwd. If there is a single standard way that any developer familiar with the application language's libraries would use to fetch URLs, which has file-system access turned off by default, then simply educating developers about the standard mechanism, and testing that file probing fails for some inputs, will probably be sufficient.

    Read the article

  • OSB 11g & SAP – Single Channel/Program ID for Multiple IDOCs

    - by Shub Lahiri, A-Team
    Background This note is a supplement to the blog entry, SOA 11g & SAP – Single Channel/Program ID for Multiple IDOCs by Greg Mally. Greg has shown how a single SOA Suite composite can be used with iWay Adapters to receive multiple IDOC types via a single channel in the adapter, corresponding to a single programID on the SAP system. We will try to address the same requirements within the OSB framework here. Project Built - Design Time The basic build of an OSB project with iWay SAP Adapter, as seen in another entry in this blog, consists of working in OSB Design console and Application Explorer. OSB Design Time - Part 1 We will create a placeholder project first in OSB with a proper directory structure, so that we can export the WSDL, XSD and the JCA binding information from Application Explorer directly into this project. Application Explorer - iWay Design Time Tool Receiving IDOCs is classified as an inbound event within Application Explorer. For setting up events, a channel is first defined (e.g. iDoc_Channel) using the same PROGRAMID (RFC destination), as defined within SAP for the OSB server. Next, the same channel is used to export the JCA Inbound Event artifacts for the candidate IDOC, e.g. DEBMAS06 directly to the pre-created OSB project. Note that the validation for schema has been turned off. As a result, this will allow the adapter, at runtime, to use a single channel to receive multiple IDOC types from SAP and pass them on to the OSB runtime engine without any validation. In other words, we do not have to repeat the above step for each IDOC type. OSB Design Time - Part 2 Create 2 simple XML based Business Services to write to a file, e.g.  SAP_DEBMAS_File and SAP_MATMAS_File. Next, generate a Proxy Service using the JCA binding file exported from Application Explorer in the previous section. In the generated proxy service, edit the message flow and add a route node. Add a routing table in the route node with the following routing function. fn:local-name-from-QName(fn:node-name($body/*[1])) This function takes advantage of the fact that the XML payload at runtime, after translation by adapter, has the IDOC type as the top element. With the routing function in place, build the routing table to add 2 branches to route the IDOCs to the appropriate Business Service for writing the XML payload to files in separate directories. This completes the build of the OSB project. Testing - Run-Time After deployment and activation, the SAP adapter will wait to receive multiple types of IDOCs sent from the SAP system using a single channel. Upon receipt of the IDOCs, the OSB project will route them appropriately to save the corresponding XML payloads for different IDOC types in different directories.

    Read the article

  • Games at Work Part 2: Gamification and Enterprise Applications

    - by ultan o'broin
    Gamification and Enterprise Applications In part 1 of this article, we explored why people are motivated to play games so much. Now, let's think about what that means for Oracle applications user experience. (Even the coffee is gamified. Acknowledgement @noelruane. Check out the Guardian article Dublin's Frothing with Tech Fever. Game development is big business in Ireland too.) Applying game dynamics (gamification) effectively in the enterprise applications space to reflect business objectives is now a hot user experience topic. Consider, for example, how such dynamics could solve applications users’ problems such as: Becoming familiar or expert with an application or process Building loyalty, customer satisfaction, and branding relationships Collaborating effectively and populating content in the community Completing tasks or solving problems on time Encouraging teamwork to achieve goals Improving data accuracy and completeness of entry Locating and managing the correct resources or information Managing changes and exceptions Setting and reaching targets, quotas, or objectives Games’ Incentives, Motivation, and Behavior I asked Julian Orr, Senior Usability Engineer, in the Oracle Fusion Applications CRM User Experience (UX) team for his thoughts on what potential gamification might offer Oracle Fusion Applications. Julian pointed to the powerful incentives offered by games as the starting place: “The biggest potential for gamification in enterprise apps is as an intrinsic motivator. Mechanisms include fun, social interaction, teamwork, primal wiring, adrenaline, financial, closed-loop feedback, locus of control, flow state, and so on. But we need to know what works best for a given work situation.” For example, in CRM service applications, we might look at the motivations of typical service applications users (see figure 1) and then determine how we can 'gamify' these motivations with techniques to optimize the desired work behavior for the role (see figure 2). Description of Figure 1 Description of Figure 2 Involving Our Users Online game players are skilled collaborators as well as problem solvers. Erika Webb (@erikanollwebb), Oracle Fusion Applications UX Manager, has run gamification events for Oracle, including one on collaboration and gamification in Oracle online communities that involved Oracle customers and partners. Read more... However, let’s be clear: gamifying a user interface that’s poorly designed is merely putting the lipstick of gamification on the pig of work. Gamification cannot replace good design and killer content based on understanding how applications users really work and what motivates them. So, Let the Games Begin! Gamification has tremendous potential for the enterprise application user experience. The Oracle Fusion Applications UX team is innovating fast and hard in this area, researching with our users how gamification can make work more satisfying and enterprises more productive. If you’re interested in knowing more about our gamification research, sign up for more information or check out how your company can get involved through the Oracle Usability Advisory Board. Your thoughts? Find those comments.

    Read the article

  • CodePlex Daily Summary for Friday, October 25, 2013

    CodePlex Daily Summary for Friday, October 25, 2013Popular Releases7zbackup - PowerShell Script to Backup Files with 7zip: 7zBackup v. 1.9.5 Stable: Do you like this piece of software ? It took some time and effort to develop. Please consider a helping me with a donation Or please visit my blog Code : Rewritten the launcher of 7zip whith "old" fashioned batch. Better handling of exit codes Feat : New argument --notifyextra to drive the way extra information is delivered with the notification log Bug : NoFollowJunctions switch was inverted Feat : Added new directives maxfilesize and minfilesize to enhance file selection upon their ...Gac Library -- C++ Utilities for GPU Accelerated GUI and Script: Gaclib 0.5.5.0: Gaclib.zip contains the following content GacUIDemo Demo solution and projects Public Source GacUI library Document HTML document. Please start at reference_gacui.html Content Necessary CSS/JPG files for document. Improvements to the previous release Add 1 demos Editor.Toolstrip.Document Added new features GuiDocumentViewer and GuiDocumentLabel is editable like an RichTextEdit control.PowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.0.7: This is a bug fix release, containing some important fixes! Fixed issue where Session 0 was not detected correctly, resulting in issues when attempting to display a UI when none was allowed Fixed Installation Prompt and Installation Restart Prompt appearing when deploy mode was non-interactive or silent Fixed issue where defer prompt is displayed after force closing multiple applications Fixed issue executing blocked app execution dialog from UNC path (executed instead from local tempo...BlackJumboDog: Ver5.9.7: 2013.10.24 Ver5.9.7 (1)FTP???????、2?????????????shift-jis????????????? (2)????HTTP????、???????POST??????????????????CtrlAltStudio Viewer: CtrlAltStudio Viewer 1.1.0.34322 Alpha 4: This experimental release of the CtrlAltStudio Viewer includes the following significant features: Oculus Rift support. Stereoscopic 3D display support. Based on Firestorm viewer 4.4.2 codebase. For more details, see the release notes linked to below. Release notes: http://ctrlaltstudio.com/viewer/release-notes/1-1-0-34322-alpha-4 Support info: http://ctrlaltstudio.com/viewer/support Privacy policy: http://ctrlaltstudio.com/viewer/privacy Disclaimer: This software is not provided or sup...ImapX 2: ImapX 2.0.0.13: The long awaited ImapX 2.0.0.13 release. The library has been rewritten from scratch, massive optimizations and refactoring done. Several new features introduced. Added support for Mono. Added support for Windows Phone 7.1 and 8.0 Added support for .Net 2.0, 3.0 Simplified connecting to server by reducing the number of parameters and adding automatic port selection. Changed authentication handling to be universal and allowing to build custom providers. Added advanced server featur...VsTortoise - a TortoiseSVN add-in for Microsoft Visual Studio: VsTortoise Build 32 Beta: Note: This release does not work with custom VsTortoise toolbars. These get removed every time when you shutdown Visual Studio. (#7940) This release has been tested with Visual Studio 2008, 2010, 2012 and 2013, using TortoiseSVN 1.6, 1.7 and 1.8. It should also still work with Visual Studio 2005, but I couldn't find anyone to test it in VS2005. Build 32 (beta) changelogNew: Added Visual Studio 2013 support New: Added Visual Studio 2012 support New: Added SVN 1.8 support New: Added 'Ch...ABCat: ABCat v.2.0.1a: ?????????? ???????? ? ?????????? ?????? ???? ??? Win7. ????????? ?????? ????????? ?? ???????. ????? ?????, ???? ????? ???????? ????????? ?????????? ????????? "?? ??????? ????? ???????????? ?????????? ??????...", ?? ?????????? ??????? ? ?????????? ?????? Microsoft SQL Ce ?? ????????? ??????: http://www.microsoft.com/en-us/download/details.aspx?id=17876. ???????? ?????? x64 ??? x86 ? ??????????? ?? ?????? ???????????? ???????. ??? ??????? ????????? ?? ?????????? ?????? Entity Framework, ? ???? ...patterns & practices: Data Access Guidance: Data Access Guidance 2013: This is the 2013 release of Data Access Guidance. The documentation for this RI is also available on MSDN: Data Access for Highly-Scalable Solutions: Using SQL, NoSQL, and Polyglot Persistence: http://msdn.microsoft.com/en-us/library/dn271399.aspxMedia Companion: Media Companion MC3.584b: IMDB changes fixed. Fixed* mc_com.exe - Fixed to using new profile entries. * Movie - fixed rename movie and folder if use foldername selected. * Movie - Alt Edit Movie, trailer url check if changed and confirm valid. * Movie - Fixed IMDB poster scraping * Movie - Fixed outline and Plot scraping, including removal of Hyperlink's. * Movie Poster refactoring, attempts to catch gdi+ errors Revision HistoryJayData -The unified data access library for JavaScript: JayData 1.3.4: JayData is a unified data access library for JavaScript to CRUD + Query data from different sources like WebAPI, OData, MongoDB, WebSQL, SQLite, HTML5 localStorage, Facebook or YQL. The library can be integrated with KendoUI, Angular.js, Knockout.js or Sencha Touch 2 and can be used on Node.js as well. See it in action in this 6 minutes video KendoUI examples: JayData example site Examples for map integration JayData example site What's new in JayData 1.3.4 For detailed release notes check ...TerrariViewer: TerrariViewer v7.2 [Terraria Inventory Editor]: Added "Check for Update" button Hopefully fixed Windows XP issue You can now backspace in Item stack fieldsVirtual Wifi Hotspot for Windows 7 & 8: Virtual Router Plus 2.6.0: Virtual Router Plus 2.6.0Fast YouTube Downloader: Fast YouTube Downloader 2.3.0: Fast YouTube DownloaderMagick.NET: Magick.NET 6.8.7.101: Magick.NET linked with ImageMagick 6.8.7.1. Breaking changes: - Renamed Matrix classes: MatrixColor = ColorMatrix and MatrixConvolve = ConvolveMatrix. - Renamed Depth method with Channels parameter to BitDepth and changed the other method into a property.VidCoder: 1.5.9 Beta: Added Rip DVD and Rip Blu-ray AutoPlay actions for Windows: now you can have VidCoder start up and scan a disc when you insert it. Go to Start -> AutoPlay to set it up. Added error message for Windows XP users rather than letting it crash. Removed "quality" preset from list for QSV as it currently doesn't offer much improvement. Changed installer to ignore version number when copying files over. Should reduce the chances of a bug from me forgetting to increment a version number. Fixed ...MSBuild Extension Pack: October 2013: Release Blog Post The MSBuild Extension Pack October 2013 release provides a collection of over 480 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GUI...VG-Ripper & PG-Ripper: VG-Ripper 2.9.49: changes NEW: Added Support for "ImageTeam.org links NEW: Added Support for "ImgNext.com" links NEW: Added Support for "HostUrImage.com" links NEW: Added Support for "3XVintage.com" linksmyCollections: Version 2.8.7.0: New in this version : Added Public Rating Added Collection Number Added Order by Collection Number Improved XBMC integrations Play on music item will now launch default player. Settings are now saved in database. Tooltip now display sort information. Fix Issue with Stars on card view. Fix Bug with PDF Export. Fix Bug with technical information's. Fix HotMovies Provider. Improved Performance on Save. Bug FixingMoreTerra (Terraria World Viewer): MoreTerra 1.11.3.1: Release 1.11.3.1 ================ = New Features = ================ Added markers for Copper Cache, Silver Cache and the Enchanted Sword. ============= = Bug Fixes = ============= Use Official Colors now no longer tries to change the Draw Wires option instead. World reading was breaking for people with a stock 1.2 Terraria version. Changed world name reading so it does not crash the program if you load MoreTerra while Terraria is saving the world. =================== = Feature Removal = =...New ProjectsAdder: Adder is simply converter for WPF binding. They add a value from parameter to target if a target int or double, concatenate parameter and value if type a strinAir Control ATV: App for Windows Phone to remote control Apple TV with FireCore aTV Flash (or Black) and AirControl installed.Bangladeshi Open Source Windows 8/Phone Apps: The largest Bangladeshi Open Source project with a vision. Mostly community-contributed Windows 8 and Windows Phone apps.BTB: Tumor board presentation tool for oncologyBulletin: not completed yet. the basic functions are ready, though.CRM Dashboard for Lync: Dynamics CRM Dashboard for Lync is an add-on that makes both applications seamlessly communicate between one another.Crowd CMS: Crowd CMS - A Crowd Funded Web Content Management System Built Using ASP.Net MVC 4 Website: http://www.crowdcms.co.uk CrowdCube: http://goo.gl/Mnd1Xsdusanproject: It is a project for Web Scripting and Application Development (COM), School of Computer of Science, University of HertfordshireElectronic Integrated Disease Surveillance System (EIDSS™) - Web Version: EIDSS can be configured as an electronic disease surveillance network, implemented in a region, to support public health practitioners and epidemiologists.Facebook Login Tool: Facebook Login ToolGadgeteer interface: Project aimed at creating common wrappers and interfaces for common components. This would allow for building applications based on the interfaces, this should Madoko: Madoko is a fast javascript Markdown processor written in Koka. It can render beautiful HTML and PDF (via LaTeX) and supports many Markdown extensions.MinotaurTeam: Project Management System using ASP.NET MVCmobSocial: Open Source Social Network for free!Online Room Reservation for Exchange: When you have Microsoft Exchange Server and meeting rooms you share with people from outside your company this is the ideal application for you.Pescar2013-shop-Masapan: aproyecto_Andy_y_Meli: mely and andyQMachine: A platform for World Wide Computingquarkz: It's just a try-out of Visual C++ (on example of Windows Forms Application). In this project I tried out to re-write one simple Flash game called quarkz in VC++TFS Workspaces Cleaner: TFS Workspaces Cleaner deletes Team Foundation Server workspaces that have not been accessed in a number of days, along with their files locally on disk.Ticketing System With ASP.NET MVC: Ticketing System where visitors (without authentication) should be able to view most commented tickets, as well as to register and login in the system. RegisterTotalFreedom Angular JS MVC: This library provides more tight integration between C# classes and AngularJS, helps to those who prefer to use as much C# and as little JavaScript as possiblevWordToHtml: vWordToHtmlvwpHistory: vwpHistoryweibowinform: weibowinformweibowinformweibowinformweibowinformweibowinformweibowinformweibowinformweibowinformweibowinformweibowinformweibowinformXompare - XML files comparison: Xompare - XML files comparison

    Read the article

  • Windows Impersonation failed

    - by skprocks
    I am using following code to implement impersonation for the particular windows account,which is failing.Please help. using System.Security.Principal; using System.Runtime.InteropServices; public partial class Source_AddNewProduct : System.Web.UI.Page { [DllImport("advapi32.dll", SetLastError = true)] static extern bool LogonUser( string principal, string authority, string password, LogonSessionType logonType, LogonProvider logonProvider, out IntPtr token); [DllImport("kernel32.dll", SetLastError = true)] static extern bool CloseHandle(IntPtr handle); enum LogonSessionType : uint { Interactive = 2, Network, Batch, Service, NetworkCleartext = 8, NewCredentials } enum LogonProvider : uint { Default = 0, // default for platform (use this!) WinNT35, // sends smoke signals to authority WinNT40, // uses NTLM WinNT50 // negotiates Kerb or NTLM } //impersonation is used when user tries to upload an image to a network drive protected void btnPrimaryPicUpload_Click1(object sender, EventArgs e) { try { string mDocumentExt = string.Empty; string mDocumentName = string.Empty; HttpPostedFile mUserPostedFile = null; HttpFileCollection mUploadedFiles = null; string xmlPath = string.Empty; FileStream fs = null; StreamReader file; string modify; mUploadedFiles = HttpContext.Current.Request.Files; mUserPostedFile = mUploadedFiles[0]; if (mUserPostedFile.ContentLength >= 0 && Path.GetFileName(mUserPostedFile.FileName) != "") { mDocumentName = Path.GetFileName(mUserPostedFile.FileName); mDocumentExt = Path.GetExtension(mDocumentName); mDocumentExt = mDocumentExt.ToLower(); if (mDocumentExt != ".jpg" && mDocumentExt != ".JPG" && mDocumentExt != ".gif" && mDocumentExt != ".GIF" && mDocumentExt != ".jpeg" && mDocumentExt != ".JPEG" && mDocumentExt != ".tiff" && mDocumentExt != ".TIFF" && mDocumentExt != ".png" && mDocumentExt != ".PNG" && mDocumentExt != ".raw" && mDocumentExt != ".RAW" && mDocumentExt != ".bmp" && mDocumentExt != ".BMP" && mDocumentExt != ".TIF" && mDocumentExt != ".tif") { Page.RegisterStartupScript("select", "<script language=" + Convert.ToChar(34) + "VBScript" + Convert.ToChar(34) + "> MsgBox " + Convert.ToChar(34) + "Please upload valid picture file format" + Convert.ToChar(34) + " , " + Convert.ToChar(34) + "64" + Convert.ToChar(34) + " , " + Convert.ToChar(34) + "WFISware" + Convert.ToChar(34) + "</script>"); } else { int intDocLen = mUserPostedFile.ContentLength; byte[] imageBytes = new byte[intDocLen]; mUserPostedFile.InputStream.Read(imageBytes, 0, mUserPostedFile.ContentLength); //xmlPath = @ConfigurationManager.AppSettings["ImagePath"].ToString(); xmlPath = Server.MapPath("./../ProductImages/"); mDocumentName = Guid.NewGuid().ToString().Replace("-", "") + System.IO.Path.GetExtension(mUserPostedFile.FileName); //if (System.IO.Path.GetExtension(mUserPostedFile.FileName) == ".jpg") //{ //} //if (System.IO.Path.GetExtension(mUserPostedFile.FileName) == ".gif") //{ //} mUserPostedFile.SaveAs(xmlPath + mDocumentName); //Remove commenting till upto stmt xmlPath = "./../ProductImages/"; to implement impersonation byte[] bytContent; IntPtr token = IntPtr.Zero; WindowsImpersonationContext impersonatedUser = null; try { // Note: Credentials should be encrypted in configuration file bool result = LogonUser(ConfigurationManager.AppSettings["ServiceAccount"].ToString(), "ad-ent", ConfigurationManager.AppSettings["ServiceAccountPassword"].ToString(), LogonSessionType.Network, LogonProvider.Default, out token); if (result) { WindowsIdentity id = new WindowsIdentity(token); // Begin impersonation impersonatedUser = id.Impersonate(); mUserPostedFile.SaveAs(xmlPath + mDocumentName); } else { throw new Exception("Identity impersonation has failed."); } } catch { throw; } finally { // Stop impersonation and revert to the process identity if (impersonatedUser != null) impersonatedUser.Undo(); // Free the token if (token != IntPtr.Zero) CloseHandle(token); } xmlPath = "./../ProductImages/"; xmlPath = xmlPath + mDocumentName; string o_image = xmlPath; //For impersoantion uncomment this line and comment next line //string o_image = "../ProductImages/" + mDocumentName; ViewState["masterImage"] = o_image; //fs = new FileStream(xmlPath, FileMode.Open, FileAccess.Read); //file = new StreamReader(fs, Encoding.UTF8); //modify = file.ReadToEnd(); //file.Close(); //commented by saurabh kumar 28may'09 imgImage.Visible = true; imgImage.ImageUrl = ViewState["masterImage"].ToString(); img_Label1.Visible = false; } //e.Values["TemplateContent"] = modify; //e.Values["TemplateName"] = mDocumentName.Replace(".xml", ""); } } catch (Exception ex) { ExceptionUtil.UI(ex); Response.Redirect("errorpage.aspx"); } } } The code on execution throws system.invalidoperation exception.I have provided full control to destination folder to the windows service account that i am impersonating.

    Read the article

  • Designing a completely new database/gui solution for my compnay

    - by user1277304
    I'm no expert when it come to everything Visual Studio 2010 and utilizing SQL server 2008. I'm sure some of my personal projects I've built for personal use would get laughed off the face of the planet, but SQLCe has been the solution I was looking for those home type of projects. And they work, flawlessly. Now I feel it's time to step up to the big league. I want to develop a complete, unified and module based solution for my company that I'm working for. We're still using stuff from the 80s for goodness sake! I use Excel and query the ancient database on my own because I can't stand the GUI. Nothing against people of age, but the IDE our programmers are using is from the stone age, and they use APL of all things with it. I've yet to see a radio button control anywhere in the GUI where it would make sense. Anyway, I want to do this right from the ground up. I'm by no means a newbie when it comes to programming in .NET 2010, however, I want the entire solution to be professionally done. I want version control, test projects, project flow, SQL 2008 integration and all the bells and whistles that come with that. I know for a fact that if we had something like that running, not only would development costs and time be slashed four fold, but the possibilities for expansion and performance would sky rocket. (Between the GUI an our DB engine, it can only use ONE CORE! ONE! It's 2012 for goodness sake!) Our business is growing and our current ancient solution just can't keep up, and I'd hate to see our business go down in flames because our programmer is stuck in the 80's and refuses to use anything current. So I ask you guys, the experts and know-it-alls, where do I start? Are there any gems of good books out there in the haystack of all "This for dummies" type of deals? I already have several people backing me in this endeavor, and while it may seem brash to just usurp the current programmers, I'm doing this for the company as a whole.

    Read the article

  • How do we keep dependent data structures up to date?

    - by Geo
    Suppose you have a parse tree, an abstract syntax tree, and a control flow graph, each one logically derived from the one before. In principle it is easy to construct each graph given the parse tree, but how can we manage the complexity of updating the graphs when the parse tree is modified? We know exactly how the tree has been modified, but how can the change be propagated to the other trees in a way that doesn't become difficult to manage? Naturally the dependent graph can be updated by simply reconstructing it from scratch every time the first graph changes, but then there would be no way of knowing the details of the changes in the dependent graph. I currently have four ways to attempt to solve this problem, but each one has difficulties. Nodes of the dependent tree each observe the relevant nodes of the original tree, updating themselves and the observer lists of original tree nodes as necessary. The conceptual complexity of this can become daunting. Each node of the original tree has a list of the dependent tree nodes that specifically depend upon it, and when the node changes it sets a flag on the dependent nodes to mark them as dirty, including the parents of the dependent nodes all the way down to the root. After each change we run an algorithm that is much like the algorithm for constructing the dependent graph from scratch, but it skips over any clean node and reconstructs each dirty node, keeping track of whether the reconstructed node is actually different from the dirty node. This can also get tricky. We can represent the logical connection between the original graph and the dependent graph as a data structure, like a list of constraints, perhaps designed using a declarative language. When the original graph changes we need only scan the list to discover which constraints are violated and how the dependent tree needs to change to correct the violation, all encoded as data. We can reconstruct the dependent graph from scratch as though there were no existing dependent graph, and then compare the existing graph and the new graph to discover how it has changed. I'm sure this is the easiest way because I know there are algorithms available for detecting differences, but they are all quite computationally expensive and in principle it seems unnecessary so I'm deliberately avoiding this option. What is the right way to deal with these sorts of problems? Surely there must be a design pattern that makes this whole thing almost easy. It would be nice to have a good solution for every problem of this general description. Does this class of problem have a name?

    Read the article

  • An Epic Question "How to call a method when the page loads"

    - by Arunkumar Ramamoorthy
    Quite often, there comes a question in OTN, with different subjects, all meaning "How to call a method when my ADF page loads?". More often, people tend to take the approach of ADF Phase Listener by overriding before/afterPhase methods.In this blog, we will go through different options in achieving it.1. Method Call Activity as default activity in Taskflow :If the application is built with taskflows, then this is the best suited approach to take. 1.a. Calling a Data Control Method :To call a Data Control method (ex: A method in AMImpl exposed as client interface), simply Drag and Drop the method as Default Method Call Activity, then draw a control flow case from the method to your page. Once after this, drop the taskflow as region in main page. When we run the main page, the Method Call Activity would be called first, and then the page will be rendered.1.b. Calling a Method in Backing Bean: To call a method in the backing bean before pageload, we can follow the similar approach as above. Instead of binding the Method Call Activity to an action/method binding in pagedef, we bind to the method. Insert a Method Call Activity (and make it as default) from the Component Palette. Double click on to select a method to bind. This approach can also be used, to perform some action in backing bean along with calling a method Data Control (just need to add bindings code in backing bean to execute DC method). 2. Using invokeAction Executable :If the application is built with pages and no taskflows are involved, then this option can be taken into consideration.In the page definition of the page, add an invokeAction Executable and bind it to the method needed to be executed. 3. Using combination of Server and Client Listeners : If the page does not have any page definition, then to call a method in backing bean, this approach can be taken. In this, a serverListener would be added at the document level, which would be calling the method in backing bean. Along with this, a clientListener would be added with "load" type (i.e will be triggered when the page loads), which would queue a serverEvent to trigger the method. 4. Using Page Phase Listener :This should be the last resort. Care should be taken when using this approach since the Phase Listener would be called for each request sent by the client.Zeeshan Baig's blog covers this scenario.

    Read the article

  • An Epic Question "How to call a method when the page loads"

    - by Arunkumar Ramamoorthy
    Quite often, there comes a question in OTN, with different subjects, all meaning "How to call a method when my ADF page loads?". More often, people tend to take the approach of ADF Phase Listener by overriding before/afterPhase methods.In this blog, we will go through different options in achieving it.1. Method Call Activity as default activity in Taskflow :If the application is built with taskflows, then this is the best suited approach to take. 1.a. Calling a Data Control Method :To call a Data Control method (ex: A method in AMImpl exposed as client interface), simply Drag and Drop the method as Default Method Call Activity, then draw a control flow case from the method to your page. Once after this, drop the taskflow as region in main page. When we run the main page, the Method Call Activity would be called first, and then the page will be rendered.1.b. Calling a Method in Backing Bean: To call a method in the backing bean before pageload, we can follow the similar approach as above. Instead of binding the Method Call Activity to an action/method binding in pagedef, we bind to the method. Insert a Method Call Activity (and make it as default) from the Component Palette. Double click on to select a method to bind. This approach can also be used, to perform some action in backing bean along with calling a method Data Control (just need to add bindings code in backing bean to execute DC method). 2. Using invokeAction Executable :If the application is built with pages and no taskflows are involved, then this option can be taken into consideration.In the page definition of the page, add an invokeAction Executable and bind it to the method needed to be executed. 3. Using combination of Server and Client Listeners : If the page does not have any page definition, then to call a method in backing bean, this approach can be taken. In this, a serverListener would be added at the document level, which would be calling the method in backing bean. Along with this, a clientListener would be added with "load" type (i.e will be triggered when the page loads), which would queue a serverEvent to trigger the method. 4. Using Page Phase Listener :This should be the last resort. Care should be taken when using this approach since the Phase Listener would be called for each request sent by the client.Zeeshan Baig's blog covers this scenario.

    Read the article

  • Data Generator Source Adapter

    This component needs little explanation. It generates random integer (DT_I4) and string (DT_WSTR) data and places them in the pipeline. You specify how many columns of each you would like and for any string columns you pass a fixed length value. You then need to specify how many rows in total you require to be generated. This component is used by us to do testing of the pipeline and components downstream. Previously we would have used a script component (as a source) to generate the rows but found ourselves rewriting the code too often so created this component. Screenshots SQL Server 2005 Integration Services SQL Server 2008/2012 Integration Services The component is provided as an MSI file, however to complete the installation, you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Data Generator Source from the list. Downloads The Data Generator Source Adapter is available for SQL Server 2005, SQL Server 2008 (includes R2) and SQL Server 2012. Please choose the version to match your SQL Server version, or you can install multiple versions and use them side by side if you have more than one version of SQL Server installed. Data Generator Source Adapter for SQL Server 2005 Data Generator Source Adapter for SQL Server 2008 Data Generator Source Adapter for SQL Server 2012 Version History SQL Server 2012 Version 3.0.0.30 - SQL Server 2012 release. Includes upgrade support for both 2005 and 2008 packages to 2012. (5 Jun 2012) SQL Server 2008 Version 2.0.0.29 - SQL Server 2008 February 2008 CTP. Includes support for upgrade of 2005 packages. Simplified user interface. (4 Mar 2008) Version 2.0.0.27 - SQL Server 2008 November 2007 CTP. String columns will now use the default system code page. Previously string columns always used 1252. (15 Feb 2008) SQL Server 2005 Version 1.1.0.23 - SQL Server 2005 RTM Refresh. SP1 Compatibility Testing. (12 Jun 2006) Version 1.0.0.0 - SQL Server 2005 IDW 16 Sept CTP. Public release. (6 Oct 2005)

    Read the article

  • Enabling DNS for IPv6 infrastructure

    After successful automatic distribution of IPv6 address information via DHCPv6 in your local network it might be time to start offering some more services. Usually, we would use host names in order to communicate with other machines instead of their bare IPv6 addresses. During the following paragraphs we are going to enable our own DNS name server with IPv6 address resolving. This is the third article in a series on IPv6 configuration: Configure IPv6 on your Linux system DHCPv6: Provide IPv6 information in your local network Enabling DNS for IPv6 infrastructure Accessing your web server via IPv6 Piece of advice: This is based on my findings on the internet while reading other people's helpful articles and going through a couple of man-pages on my local system. What's your name and your IPv6 address? $ sudo service bind9 status * bind9 is running If the service is not recognised, you have to install it first on your system. This is done very easy and quickly like so: $ sudo apt-get install bind9 Once again, there is no specialised package for IPv6. Just the regular application is good to go. But of course, it is necessary to enable IPv6 binding in the options. Let's fire up a text editor and modify the configuration file. $ sudo nano /etc/bind/named.conf.optionsacl iosnet {        127.0.0.1;        192.168.1.0/24;        ::1/128;        2001:db8:bad:a55::/64;};listen-on { iosnet; };listen-on-v6 { any; };allow-query { iosnet; };allow-transfer { iosnet; }; Most important directive is the listen-on-v6. This will enable your named to bind to your IPv6 addresses specified on your system. Easiest is to specify any as value, and named will bind to all available IPv6 addresses during start. More details and explanations are found in the man-pages of named.conf. Save the file and restart the named service. As usual, check your log files and correct your configuration in case of any logged error messages. Using the netstat command you can validate whether the service is running and to which IP and IPv6 addresses it is bound to, like so: $ sudo service bind9 restart $ sudo netstat -lnptu | grep "named\W*$"tcp        0      0 192.168.1.2:53        0.0.0.0:*               LISTEN      1734/named      tcp        0      0 127.0.0.1:53          0.0.0.0:*               LISTEN      1734/named      tcp6       0      0 :::53                 :::*                    LISTEN      1734/named      udp        0      0 192.168.1.2:53        0.0.0.0:*                           1734/named      udp        0      0 127.0.0.1:53          0.0.0.0:*                           1734/named      udp6       0      0 :::53                 :::*                                1734/named   Sweet! Okay, now it's about time to resolve host names and their assigned IPv6 addresses using our own DNS name server. $ host -t aaaa www.6bone.net 2001:db8:bad:a55::2Using domain server:Name: 2001:db8:bad:a55::2Address: 2001:db8:bad:a55::2#53Aliases: www.6bone.net is an alias for 6bone.net.6bone.net has IPv6 address 2001:5c0:1000:10::2 Alright, our newly configured BIND named is fully operational. Eventually, you might be more familiar with the dig command. Here is the same kind of IPv6 host name resolve but it will provide more details about that particular host as well as the domain in general. $ dig @2001:db8:bad:a55::2 www.6bone.net. AAAA More details on the Berkeley Internet Name Domain (bind) daemon and IPv6 are available in Chapter 22.1 of Peter Bieringer's HOWTO on IPv6. Setting up your own DNS zone Now, that we have an operational named in place, it's about time to implement and configure our own host names and IPv6 address resolving. The general approach is to create your own zone database below the bind folder and to add AAAA records for your hosts. In order to achieve this, we have to define the zone first in the configuration file named.conf.local. $ sudo nano /etc/bind/named.conf.local //// Do any local configuration here//zone "ios.mu" {        type master;        file "/etc/bind/zones/db.ios.mu";}; Here we specify the location of our zone database file. Next, we are going to create it and add our host names, our IP and our IPv6 addresses. $ sudo nano /etc/bind/zones/db.ios.mu $ORIGIN .$TTL 259200     ; 3 daysios.mu                  IN SOA  ios.mu. hostmaster.ios.mu. (                                2014031101 ; serial                                28800      ; refresh (8 hours)                                7200       ; retry (2 hours)                                604800     ; expire (1 week)                                86400      ; minimum (1 day)                                )                        NS      server.ios.mu.$ORIGIN ios.mu.server                  A       192.168.1.2server                  AAAA    2001:db8:bad:a55::2client1                 A       192.168.1.3client1                 AAAA    2001:db8:bad:a55::3client2                 A       192.168.1.4client2                 AAAA    2001:db8:bad:a55::4 With a couple of machines in place, it's time to reload that new configuration. Note: Each time you are going to change your zone databases you have to modify the serial information, too. Named loads the plain text zone definitions and converts them into an internal, indexed binary format to improve lookup performance. If you forget to change your serial then named will not use the new records from the text file but the indexed ones. Or you have to flush the index and force a reload of the zone. This can be done easily by either restarting the named: $ sudo service bind9 restart or by reloading the configuration file using the name server control utility - rndc: $ sudo rndc reconfig Check your log files for any error messages and whether the new zone database has been accepted. Next, we are going to resolve a host name trying to get its IPv6 address like so: $ host -t aaaa server.ios.mu. 2001:db8:bad:a55::2Using domain server:Name: 2001:db8:bad:a55::2Address: 2001:db8:bad:a55::2#53Aliases: server.ios.mu has IPv6 address 2001:db8:bad:a55::2 Looks good. Alternatively, you could have just ping'd the system as well using the ping6 command instead of the regular ping: $ ping6 serverPING server(2001:db8:bad:a55::2) 56 data bytes64 bytes from 2001:db8:bad:a55::2: icmp_seq=1 ttl=64 time=0.615 ms64 bytes from 2001:db8:bad:a55::2: icmp_seq=2 ttl=64 time=0.407 ms^C--- ios1 ping statistics ---2 packets transmitted, 2 received, 0% packet loss, time 1001msrtt min/avg/max/mdev = 0.407/0.511/0.615/0.104 ms That also looks promising to me. How about your configuration? Next, it might be interesting to extend the range of available services on the network. One essential service would be to have web sites at hand.

    Read the article

  • BIP 10.1.3.4.x June 2010 Update Available

    - by Tim Dexter
    A new patchset for 10.1.3.4.0 and 10.1.3.4.1 is available on Metalink. some notes: The patch number is 9791839. This patchset includes 28 new bug fixes since the last patchset release on March 31. This is a culmulative update that includes all the fixes and enhancements from previous updates. The patch will supercede the other two updates. Install instructions are in the readme inside the patch There is also a new BIP client patch available, 9821068. No new template building features to my knowledge but there is an update to the template viewer to allow you to test and debug you siny new Excel templates. Server 8529759XMLP_TEMPLATE_DESIGNER CANNOT SAVE / UPLOAD TEMPLATE 8566455 BI PUBLISHER SCHEDULER DOES NOT START WITH JNDI DATA SOURCE 9295667RESPONSE OF GETSCHEDULEDREPORTINFO RETURNS STATUS AS 'UNKNOWN' INSTEAD OF 'SCHED 9542413 UNABLE TO CREATE A NEW TEMPLATE FROM UI 9546137 EXCEL ANALYZER TEMPLATE FAILS FOR A STRUCTURED XML WHEN IT IS UPLOADED 9556338 SIEBEL - BIP PARAMETERS SORT ORDER 9560562 BI PUBLISHER CACHE DIRECTORY FILLING UP AND POINTING TO INVALID DIRECTORY 9646599 USER ROLE DEFINED AS PRIMARYGROUP IN ACTIVEDIRECTORY GROUP ARE NOT RECOGNIZED 9664768 ER: NEED TO BIND USER ATTRIBUTE VALUES DEFINED IN ACTIVEDIRECTORY IN DATA QUERY 9665075 BI PUBLISHER AFTER 9546699 NOTIFICATIONS FOR REPORTS FAIL 9669973 ER: NEED TO SUPPORT PRE-PROCESSING XML WITH XSL FOR EXCEL TEMPLATE 9704401 ER: NEED TO SUPPORT DEFAULT GROUP FOR ALL USERS IN LDAP/AD SECURITY 9711899 SEARCH PARAMETER IS NOT VISIBLE WHEN SCHEDULE A REPORT 9753736 SOME ROLES FROM ACTIVEDIRECTORY ARE NOT LISTED IN ADMIN ROLE-FOLDER MAPPING 9771354 MULTIPLE PARAMETERS IN 10.1.3.4.1 DATA TEMPLATE ACT ACT DIFFERENTLY FROM 10.1.3. 9772982 "REFRESH OTHER PARAMETERS ON CHANGE" DOESN'T WORK PROPERLY Core  8599646 ER:EXTRA SPACE ADDED BELOW IMAGE IN A TABLE CELL OF TEMPLATE IN FIREFOX 9377593 SOME ROWS HEIGHT IN HTML/EXCEL OUTPUT ARE TOO BIG IN BI PUBLISHER 9487030 NAVIGATION TREE REPEATING TWICE IN PDF DCCUMENT CREATED BY BI PUBLISHER 9509432 PERFORMANCE ISSUE WHEN USING PDF TEMPLATE 9534424 PS: DOCUMENT-REPEAT-FULLPATH-ELEMENTNAME SHOULDNT USE DOT "." AS PATH SEPARATOR 9553360 FORMPROCESSOR CANNOT PARSE SOME PDF TEMPLATES 9554959 TEXT IN AUTOSHAPE IS NOT PROPERLY CUT OFF FOR LINE WRAPPING 9569417 AFTER APPLYING PATCH 9509432 PDF TEMPLATES WITH DBDRV PRODUCE NO OUTPUT 9571670 ER: EXCEL TEMPLATE TO SUPPORT XSLT LOGIC AND XSL CUSTOM EXTENTIONS 9589809 XSL:CALL-TEMPLATE IS MISSING IN GENERATED XSL FILE 9605920 BOOKMARK TESTCASE FAILED DUE TO ER9283933 9689634 PRINT FLOW CHART USING ACROSS 3 DOWN 0 GIVES EXTRA BLANK PAGES You might have noticed some fixes and ehancements to the Excel templates so I can get back on those now. There is a part two to the Mapviewer BIP Mashup coming ... just need aanother 4 hours in the day to squeeze it in.

    Read the article

  • Where can I hire local programmers with very specific skillsets?

    - by Lostsoul
    I have been browsing the site and haven't found a exact fit to this question so I'll post it but if its already answered(since I'm sure its a common problem, then let me know). I have a business and want to create a totally different product in a different industry than I'm currently in, so I learned how to program and created a working prototype. I have a bit of savings and am getting some cash flow from my current business so I can go out and hire a developer(in the future hopefully it can be permenant but right now I just need a person willing to work on contract and code on weekends or their spare time and I just want to pay in cash instead of equity or future promises). At first I wasn't sure what kind of developer to hire but this question helped me understand I should target specific skills I need as opposed to general programmers. This poses a problem for me since general programmers are everywhere but if I want specific skills I'm unsure how to get them. I thought about a list of approaches but it doesn't feel complete or effective since it seems to be assuming good developers are actively looking. If it helps I want someone local(since this is my first developer hire) and looking for skills like cuda, hadoop, hbase, java and c. Any suggestions? As a FYI, I have been thinking of approaching it as: Go to meet ups for one or more skills I need. Use LinkedIn to find people with the skills I need Search for job postings that contain skills I need and then use linkedIn to reach out to that firms employees since many profiles on linkedin are not very updated or detailed but job postings generally are. Send postings to universities and maybe find a student who loves technology so much they learned these tools on their own. Post on job board. Not sure how successful it will be to post to monster. Use Craigslist, not sure if a highly skilled developer would go here for work. What am I missing? I could be wrong but it seems like good/smart/able developers aren't hunting for work non-stop(especially in this tech job market). Plus most successful people I know have work/life balance so I'm not sure if the best ones really care about code after work. Lastly, most of the skills I need aren't used in big corporations so not sure how aggressively smart developers at small shops look for work. I don’t really know any developers personally, so but should I be using the above plan or if they live balanced lives should I be looking outside of the regular resources(and instead focus on asking around my gym or my accountant or something)? Sorry, I'm making huge assumptions here, I guess because developers are a total mystery to me. I kind of wish Jane Goodall wrote a book on understanding developers social behaviour better :-p

    Read the article

  • Gamification in the enterprise updates, September edition

    - by erikanollwebb
    Things have been a little busy here at GamifyOracle.  Last week, I attended a small conference in San Diego on Enterprise Gamification.  Mario Herger of SAP, Matt Landes of Google and I were on a panel discussion about how to introduce and advocate gamification in your organization.  I gave a talk as well as a workshop on gamification.  The workshop was a new concept, to take our Design Jam from Applications User Experience and try it with people outside of user experience.  I have to say, the whole thing was a great success, in great part because I had some expert help from Teena Singh from Apps UX.  We took a flow from expense reporting and created a scenario about sales reps who are on the road a lot and how we needed them to get their expense reports filed by the end of the fiscal year.  We divided the attendees into groups and gave them a little over two hours to work out how they might use game mechanics to gamify the flows.   We even took the opportunity to re-use the app our fab dev team in our Mexico Development Center put together to gamify the event including badges, points, prizes and a leaderboard.  Since I am a firm believer that you can't gamify everything (or at least, not everything well), I focused my talk prior to the workshop on when it works, and when it might not, including pitfalls to gamifying badly.  I was impressed that the teams all considered what might go wrong with gamifying expenses and built into their designs some protections against that.  I can't wait to take this concept on the road again, it really was a fun day. Now that we have gotten through that set of events, we're wildly working on our next project for next week.  I'm doing a focus group at Oracle OpenWorld on Gamification in the Enterprise.  To do that, Andrea Cantu and I are trying to kill as many trees as possible while we work out some gamification concepts to present (see proof below!).  It should be a great event and I'm hoping we learn a lot about what our customers think about the use of gamification in their companies and in the products they use. So that's the news so far from GamifyOracle land.  I'll try to get more out about those events and more after next week. And if you will be at OOW, ping me and we can discuss in person!  I'd love to know what everyone is thinking in the area.

    Read the article

  • RPG Monster-Area, Spawn, Loot table Design

    - by daemonfire300
    I currently struggle with creating the database structure for my RPG. I got so far: tables: area (id) monster (id, area.id, monster.id, hp, attack, defense, name) item (id, some other values) loot (id = monster.id, item = item.id, chance) spawn (id = area.id, monster = monster.id, count) It is a browser-based game like e.g. Castle Age. The player can move from area to area. If a player enters an area the system spawns, based on the area.id and using the spawn table data, new monsters into the monster table. If a player kills a monster, the system picks the monster.id looks up the items via the the loot table and adds those items to the player's inventory. First, is this smart? Second, I need some kind of "monster_instance"-table and "area_instance"-table, since each player enters his very own "area" and does damage to his very own "monsters". Another approach would be adding the / a player.id to the monster table, so each monster spawned, has it's own "player", but I still need to assign them to an area, and I think this would overload the monster table if I put in the player.id and the area.id into the monster table. What are your thoughts? Temporary Solution monster (id, attackDamage, defense, hp, exp, etc.) monster_instance (id, player.id, area_instance.id, hp, attackDamage, defense, monster.id, etc.) area (id, name, area.id access, restriction) area_instance (id, area.id, last_visited) spawn (id, area.id, monster.id) loot (id, monster.id, chance, amount, ?area.id?) An example system-flow would be: Player enters area 1: system creates area_instance of type area.id = 1 and sets player.location to area.id = 1 If Player wants to battle monsters in the current area: system fetches all spawn entries matching area.id == player.location and creates a new monster_instance for each spawn by fetching the according monster-base data from table monster. If a monster is fetched more than once it may be cached. If Player actually attacks a monster: system updates the according monster_instance, if monster dies the instance if removed after creating the loot If Player leaves the area: area_instance.last_visited is set to NOW(), if player doesn't return to data area within a certain amount of time area_instance including all its monster_instances are deleted.

    Read the article

  • Subterranean IL: Exception handling 1

    - by Simon Cooper
    Today, I'll be starting a look at the Structured Exception Handling mechanism within the CLR. Exception handling is quite a complicated business, and, as a result, the rules governing exception handling clauses in IL are quite strict; you need to be careful when writing exception clauses in IL. Exception handlers Exception handlers are specified using a .try clause within a method definition. .try <TryStartLabel> to <TryEndLabel> <HandlerType> handler <HandlerStartLabel> to <HandlerEndLabel> As an example, a basic try/catch block would be specified like so: TryBlockStart: // ... leave.s CatchBlockEndTryBlockEnd:CatchBlockStart: // at the start of a catch block, the exception thrown is on the stack callvirt instance string [mscorlib]System.Object::ToString() call void [mscorlib]System.Console::WriteLine(string) leave.s CatchBlockEnd CatchBlockEnd: // method code continues... .try TryBlockStart to TryBlockEnd catch [mscorlib]System.Exception handler CatchBlockStart to CatchBlockEnd There are four different types of handler that can be specified: catch <TypeToken> This is the standard exception catch clause; you specify the object type that you want to catch (for example, [mscorlib]System.ArgumentException). Any object can be thrown as an exception, although Microsoft recommend that only classes derived from System.Exception are thrown as exceptions. filter <FilterLabel> A filter block allows you to provide custom logic to determine if a handler block should be run. This functionality is exposed in VB, but not in C#. finally A finally block executes when the try block exits, regardless of whether an exception was thrown or not. fault This is similar to a finally block, but a fault block executes only if an exception was thrown. This is not exposed in VB or C#. You can specify multiple catch or filter handling blocks in each .try, but fault and finally handlers must have their own .try clause. We'll look into why this is in later posts. Scoped exception handlers The .try syntax is quite tricky to use; it requires multiple labels, and you've got to be careful to keep separate the different exception handling sections. However, starting from .NET 2, IL allows you to use scope blocks to specify exception handlers instead. Using this syntax, the example above can be written like so: .try { // ... leave.s EndSEH}catch [mscorlib]System.Exception { callvirt instance string [mscorlib]System.Object::ToString() call void [mscorlib]System.Console::WriteLine(string) leave.s EndSEH}EndSEH:// method code continues... As you can see, this is much easier to write (and read!) than a stand-alone .try clause. Next time, I'll be looking at some of the restrictions imposed by SEH on control flow, and how the C# compiler generated exception handling clauses.

    Read the article

  • Who should control navigation in an MVVM application?

    - by SonOfPirate
    Example #1: I have a view displayed in my MVVM application (let's use Silverlight for the purposes of the discussion) and I click on a button that should take me to a new page. Example #2: That same view has another button that, when clicked, should open up a details view in a child window (dialog). We know that there will be Command objects exposed by our ViewModel bound to the buttons with methods that respond to the user's click. But, what then? How do we complete the action? Even if we use a so-called NavigationService, what are we telling it? To be more specific, in a traditional View-first model (like URL-based navigation schemes such as on the web or the SL built-in navigation framework) the Command objects would have to know what View to display next. That seems to cross the line when it comes to the separation of concerns promoted by the pattern. On the other hand, if the button wasn't wired to a Command object and behaved like a hyperlink, the navigation rules could be defined in the markup. But do we want the Views to control application flow and isn't navigation just another type of business logic? (I can say yes in some cases and no in others.) To me, the utopian implementation of the MVVM pattern (and I've heard others profess this) would be to have the ViewModel wired in such a way that the application can run headless (i.e. no Views). This provides the most surface area for code-based testing and makes the Views a true skin on the application. And my ViewModel shouldn't care if it displayed in the main window, a floating panel or a child window, should it? According to this apprach, it is up to some other mechanism at runtime to 'bind' what View should be displayed for each ViewModel. But what if we want to share a View with multiple ViewModels or vice versa? So given the need to manage the View-ViewModel relationship so we know what to display when along with the need to navigate between views, including displaying child windows / dialogs, how do we truly accomplish this in the MVVM pattern?

    Read the article

  • ArchBeat Link-o-Rama for 2012-08-29

    - by Bob Rhubart
    ORCLville: OOW 2012 - Crystal BallOracle ACE Director Floyd Teter cooks up some tongue-in-cheek predictions for news and announcements that might come out of Oracle OpenWorld 2012. What's your prediction? Oracle Optimized Solutions at Oracle OpenWorld 2012 | Oracle Hardware Hardware matters, too! The people behind the Oracle Hardware blog have put together a list of Oracle Openworld 2012 sessions focused Oracle Optimized Solutions, "designed, pre-tested, tuned and fully documented architectures for optimal performance and availability." Just plug the session ID numbers into Schedule Builder and you're good to go. AIX Checklist for stable OBIEE deployment | Dick Dunbar "OBIEE is a complicated system with many moving parts and connection points," according to Oracle Business Inteligence escalation engineer Dick Dunbar. "The purpose of this article is to provide a checklist to discuss OBIEE deployment with your systems administrators." Demo for OPN: Coherence Management with EM Cloud Control 12c Oracle Partner Network members can check out a new Coherence Management demo that showcases some of the key capabilities of Management Pack for Oracle Coherence and JVM Diagnostics. "The demo flow showcases the key enhancements made in Enterprise Manager 12c release which includes new customizable performance summary, cache data management and configuration management," according to the WebLogic Partner Community EMEA blog. The Pragmatic Architect: To Boldly Go Where No One Has Gone Before | Frank Buschmann "Many architects have technical knowledge that's both impressive and sound, which is indeed an inevitable basis for design success," says Frank Buschmann. "Yet, a lot of software projects fail or suffer due to severe challenges in their architecture. The key to mastery is how architects approach design, what they value, and where they focus their attention and work." As retail dies, whom will be the winners? | Peter Evans-Greenwood "The problem for many retailers is that how consumers shop has changed but the the retailers haven't adapted, " says Peter Evans-Greenwood. "Their sole virtue was to be the last step in a supply chain delivering somebody else's products to the consumer. However, being the last step in the supply chain is no longer a virtue when consumers skip across channels and can reach around the globe, no longer dependant on or limited to what they can find locally." Thought for the Day "Brains require stimulation. If you're locked into a pattern of work, work, and more work, your brain soon habituates - the same way that it lets you stop hearing a clock ticking. So, if you want to be more effective at work, you must, paradoxically, be less single-minded in your devotion to work. Anything you do—anything—that stimulates new segments of your brain will make you a more effective programmer or analyst. I promise, with a money-back guarantee." — Gerald M. Weinberg Source: SoftwareQuotes.com

    Read the article

  • Wireframing: A Day In the Life of UX Workshop at Oracle

    - by ultan o'broin
    The Oracle Applications User Experience team's Day in the Life (DITL) of User Experience (UX) event was run in Oracle's Redwood Shores HQ for Oracle Usability Advisory Board (OUAB) members. I was charged with putting together a wireframing session, together with Director of Financial Applications User Experience, Scott Robinson (@scottrobinson). Example of stunning new wireframing visuals we used on the DITL events. We put on a lively show, explaining the basics of wireframing, the concepts, what it is and isn't, considerations on wireframing tool choice, and then imparting some tips and best practices. But the real energy came when the OUAB customers and partners in the room were challenge to do some wireframing of their own. Wireframing is about bringing your business and product use cases to life in real UX visual terms, by creating a low-fidelity drawing to iterate and agree on in advance of prototyping and coding what is to be finally built and rolled out for users. All the best people wireframe. Leonardo da Vinci used "cartoons" on some great works, tracing outlines first and using red ochre or charcoal dropped through holes in the tracing parchment onto the canvas to outline the subject. (Image distributed under Wikimedia commons license) Wireframing an application's user experience design enables you to: Obtain stakeholder buy-in. Enable faster iteration of different designs. Determine the task flow navigation paths (in Oracle Fusion Applications navigation is linked with user roles). Develop a content strategy (readability, search engine optimization (SEO) of content, and so on) Lay out the pages, widgets, groups of features, and so on. Apply usability heuristics early (no replacement for usability testing, but a great way to do some heavy-lifting up front). Decide upstream which functional user experience design patterns to apply (out of the box solutions that expedite productivity). Assess which Oracle Application Development Framework (ADF) or equivalent technology components can be used (again, developer productivity is enhanced downstream). We ran a lively hands-on exercise where teams wireframed a choice of application scenarios using the time-honored tools of pen and paper. Scott worked the floor like a pro, pointing out great use of features, best practices, innovations, and making sure that the whole concept of wireframing, the gestalt, transferred. "We need more buttons!" The cry of the energized. Not quite. The winning wireframe session (online shopping scenario) from the Applications UX DITL event shown. Great fun, great energy, and great teamwork were evident in the room. Naturally, there were prizes for the best wireframe. Well, actually, prizes were handed out to the other attendees too! An exciting, slightly different aspect to delivery of this session made the wireframing event one of the highlights of the day. And definitely, something we will repeat again when we get the chance. Thanks to everyone who attended, contributed, and helped organize.

    Read the article

  • Server Error in '/' Application (ASP.NET)

    - by baeltazor
    Hi All I just setup up member ship roles and registration on my website with visual web developer using the tutorial on msdn. It works perfectly locally, but when i uploaded it to my server, I get the following page: "Server Error in '/' Application. -------------------------------------------------------------------------------- Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: The connection name 'LocalSqlServer' was not found in the applications configuration or the connection string is empty. Source Error: [No relevant source lines] Source File: machine.config Line: 160 -------------------------------------------------------------------------------- Version Information: Microsoft .NET Framework Version:2.0.50727.4200; ASP.NET Version:2.0.50727.4016 " Does anybody know why I'm seeing this and how I may go about fixinf this? Any help is greatly appreciated. Thank you Bael. EDIT: I have just looked at my web.config file after reading the following line in the error message: "The connection name 'LocalSqlServer' was not found in the applications configuration or the connection string is empty." ... And have noticed that the following element is completely empty: <connectionStrings/> // Is this one supposed to be empty? if not what should go here? In the error it implies it shouldn't be empty. Also, I don't know where I should place LocalSqlServer LATEST EDIT After changing DataSource to LocalHost i get the following error: Server Error in '/JTS' Application. -------------------------------------------------------------------------------- A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [SqlException (0x80131904): A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +4849015 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +194 System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +4862333 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +90 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +342 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +221 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +189 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +185 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +31 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +433 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +499 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +65 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +117 System.Data.SqlClient.SqlConnection.Open() +122 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +87 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +221 System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +815 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42 System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +78 System.Web.UI.WebControls.Login.AuthenticateUsingMembershipProvider(AuthenticateEventArgs e) +60 System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +119 System.Web.UI.WebControls.Login.AttemptLogin() +115 System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +101 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +37 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +118 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +166 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +10 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +13 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +36 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1565 -------------------------------------------------------------------------------- Version Information: Microsoft .NET Framework Version:2.0.50727.4927; ASP.NET Version:2.0.50727.4927

    Read the article

  • Hadoop, NOSQL, and the Relational Model

    - by Phil Factor
    (Guest Editorial for the IT Pro/SysAdmin Newsletter)Whereas Relational Databases fit the world of commerce like a glove, it is useless to pretend that they are a perfect fit for all human endeavours. Although, with SQL Server, we’ve made great strides with indexing text, in processing spatial data and processing markup, there is still a problem in dealing efficiently with large volumes of ephemeral semi-structured data. Key-value stores such as Cassandra, Project Voldemort, and Riak are of great value for ephemeral data, and seem of equal value as a data-feed that provides aggregations to an RDBMS. However, the Document databases such as MongoDB and CouchDB are ideal for semi-structured data for which no fixed schema exists; analytics and logging are obvious examples. NoSQL products, such as MongoDB, tackle the semi-structured data problem with panache. MongoDB is designed with a simple document-oriented data model that scales horizontally across multiple servers. It doesn’t impose a schema, and relies on the application to enforce the data structure. This is another take on the old ‘EAV’ problem (where you don’t know in advance all the attributes of a particular entity) It uses a clever replica set design that allows automatic failover, and uses journaling for data durability. It allows indexing and ad-hoc querying. However, for SQL Server users, the obvious choice for handling semi-structured data is Apache Hadoop. There will soon be an ODBC Driver for Apache Hive .and an Add-in for Excel. Additionally, there are now two Hadoop-based connectors for SQL Server; the Apache Hadoop connector for SQL Server 2008 R2, and the SQL Server Parallel Data Warehouse (PDW) connector. We can connect to Hadoop process the semi-structured data and then store it in SQL Server. For one steeped in the culture of Relational SQL Databases, I might be expected to throw up my hands in the air in a gesture of contempt for a technology that was, judging by the overblown journalism on the subject, about to make my own profession as archaic as the Saggar makers bottom knocker (a potter’s assistant who helped the saggar maker to make the bottom of the saggar by placing clay in a metal hoop and bashing it). However, on the contrary, I find that I'm delighted with the advances made by the NoSQL databases in the past few years. Having the flow of ideas from the NoSQL providers will knock any trace of complacency out of the providers of Relational Databases and inspire them into back-fitting some features, such as horizontal scaling, with sharding and automatic failover into SQL-based RDBMSs. It will do the breed a power of good to benefit from all this lateral thinking.

    Read the article

  • Help needed on an SQL configuration problem.

    - by user321048
    I have been banging my head with this one more the two weeks, and still don't know what the problem is ( I can't narrow it down). The problem is the following. I have a solution with 3 project in it all written in c# and I with LINQ. One project is the main web site, the other is the data layer (communication with the database) and the third one is a custom little CMS. The problem is the following: On a hosting provider when I publish the site it all works perfectly, but this site was needed to be hosted on the client server so I needed to do that. But the problem is that I also needed to configure the client server, because they don't have an Administrator employed (I know, I know ;) ). For the first time I some how managed, to set it up but a problem appear. My main web site is working just as it suppose to be - it reads (communicates with) the database, but My CMS is not. It shows the first log in page, but after that when I try to log in it throws the following error: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [SqlException (0x80131904): A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +4846887 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +194 System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +4860189 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +90 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +342 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +221 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +189 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +185 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +31 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +433 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +499 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +65 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +117 System.Data.SqlClient.SqlConnection.Open() +122 System.Data.Linq.SqlClient.SqlConnectionManager.UseConnection(IConnectionUser user) +44 System.Data.Linq.SqlClient.SqlProvider.get_IsSqlCe() +45 System.Data.Linq.SqlClient.SqlProvider.InitializeProviderMode() +20 System.Data.Linq.SqlClient.SqlProvider.System.Data.Linq.Provider.IProvider.Execute(Expression query) +57 System.Data.Linq.DataQuery`1.System.Linq.IQueryProvider.Execute(Expression expression) +23 System.Linq.Queryable.Count(IQueryable`1 source) +240 CMS.Security.UserProfile.LoginUser() in C:\Documents and Settings\Dimitar\Desktop\New Mepso Final 08_04\CMS\Classes\UserProfile.cs:132 CMS.Default.Login1_Authenticate(Object sender, AuthenticateEventArgs e) in C:\Documents and Settings\Dimitar\Desktop\New Mepso Final 08_04\CMS\Default.aspx.cs:37 System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +108 System.Web.UI.WebControls.Login.AttemptLogin() +115 System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +101 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +37 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +118 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +166 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +10 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +13 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +36 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1565 Maybe this is a dumb question, but I cannot find the root of the problem, let alone the solution. So far I have tried the following: -setting time out on connection string to a higher value -configuration and after that turning off server firewall -checking the connection string over and over again (they are the same for all three projects and are saved in web.config) Important notes: I have tried executing the project from VS2008 with a connection string to the same database and the results are the same. That's why I think the problem is the SQL Server 2005 and not the IIS7. Any bit of information is more then welcomed.

    Read the article

  • Designing a completly new database/gui solution for my compnay

    - by user1277304
    I'm no expert when it come to Everything Visual Studio 2010 and utilizing SQL server 2008. I'm sure some of my personal projects I've built for personal use would get laughed off the face of the planet, but SQLCe has been the solution I was looking for those home type of projects. And they work, flawlessly. Now I feel it's time to step up to the big league. I want to develop a complete, unified and module based solution for my compnay that I'm working for. We're still using stuff from the 80s for goodness sake! I use Excel and query the ancient database on my own because I can't stand the GUI. Nothing against people of age, but the IDE our programmers are using is from the stone age, and they use APL of all things with it. I've yet to see a radio buttton control anywhere in the GUI where it would make sense. Anyway, I want to do this right from the ground up. I'm by no means a newbie when it comes to programming in .NET 2010, however, I want the entire solution to be professionaly done. I want version control, test projects, project flow, SQL 2008 integration and all the bells and whistles that come with that. I know for a fact that if we had something like that runnning, not only would development costs and time be slashed four fold, but the possibilities for expansion and performance would sky rocket. (Between the GUI an our DB engine, it can only use ONE CORE! ONE! It's 2012 for goodness sake!) Our buisness is growing and our current ancient solution just can't keep up, and I'd hate to see our buisness go down in flames because our programmer is stuck in the 80's and refuses to use anything current. So I ask you guys, the experts and know-it-alls, where do I start? Are there any gems of good books out there in the haystack of all "This for dummies" type of deals? I already have several people backing me in this endevour, and while it may seem brash to just usurp the current programmers, I'm doing this for the company as a whole. Thank you guys for your time.

    Read the article

  • Portland Silverlight User Group: WP7 &amp; XNA &ndash; I survived.

    - by George Clingerman
    Last night I gave a talk to the Portland Silverlight User Group. http://www.portlandsilverlight.net/Meetings/Details/15 And I survived (which you should have probably already figured out since you’re reading this post AND that’s what I titled it…) Really though it was a fantastic time and I had a lot of fun! I was a little nervous getting ready for it, but I’m always a little nervous getting ready for things. I had the game all written,  I knew the general flow for what the talk was going to be. I read over Scott Hanselman’s 11 Top Tips for a Successful Technical presentation (which has become something I do EVERY time I’m preparing for a talk). I gave myself a brief list of points I wanted to make sure I covered or worked into the talk. But then I was ready and I waited. I hate the waiting. It makes me nervous. Once I was up in front of the room though with my laptop open and some XNA code in front of me, my nerves go away. Then I’m ready. I know XNA, I love talking about XNA and I love sharing what I know and hearing questions that make me think. And hopefully that came through while I was talking. I had a freaking blast. The swag went quickly (and I was even able to hand out some XNA 2.0 books that have been around forever!) and the pizza was been gobbled down. I started the talk at about 6:10 and managed to cover a very brief intro to programming against the game loop (it’s a different concept and one that seems to trip a lot of people up getting started with game development) and then rolled into making a basic 2D game for Windows Phone 7 using XNA. And I finished the whole thing before 8:30. Wahoo! I’m planning on posting the source code and assets on my site so those should be coming soon. And to make things even better, they recorded the whole thing on video so everyone will get to see me pretend I can speak! Just wait till you hear the new song I wrote for this talk…

    Read the article

< Previous Page | 435 436 437 438 439 440 441 442 443 444 445 446  | Next Page >