Search Results

Search found 11610 results on 465 pages for 'cloud apps'.

Page 440/465 | < Previous Page | 436 437 438 439 440 441 442 443 444 445 446 447  | Next Page >

  • Asus M4A79XTD-EVO / AMD Phenom II X4 965 Crashes / BSOD / Hangs / Restarts

    - by Tiby
    I'll try to be as concise as possible because I have a lot to say about my problem, but I'd rather say it when asked or when I feel it's necessary, just to make this initial reading clearer. For about a year and a half I have periods when my system has all the problems in the title (I'll use the word 'crash' for either one). I'll list some patterns and what I tried to do and what were the results, but the list is not exclusive: usually it crashes when a CPU-intensive operation is in progress, like a game or video encoding or HD movie rendering, but also sometimes crashes when I'm doing nothing after a first crash the system is very unstable and sometimes it crashes even during POST, or doesn't boot at all Some months ago I went to a local service (one that you just put your computer on the table and sit there with a guy and trying to figure out the problem, very rare these days) and they used OCCT and it crashed every time he changed some part to test it out (PSU, RAM, video card, HDD). The last one was the CPU. They changed the CPU and it didn't crash any more. Then when they put my CPU back, it also didn't crash. We figured that the trouble was the thermal paste (probably some 2 years old) because it was the only thing changed while testing. Up until 2 weeks ago, I haven't had any more problems. 2 weeks ago the problems reappeared. I changed again the thermal paste, put some Arctic Silver 5, and for about a week everything worked perfect (tried some games, video encoding, no more crashes). But again it started crashing in the same fashion as the first time. But now, instead, I figured out a very odd behaviour: when I start some of the apps above, in most cases it crashes if I start OCCT and turn on the CPU test, and run any of the programs above, it doesn't crash, even if the CPU is on 100% load (and 65-70 degrees Celsius temperature) if I shut down OCCT and continue using the programs, it crashes in a very short period of time (even if the CPU is on 5-10% load and 40 degrees) There are so many patterns and temporary solutions that I figured out in this year and a half period of time, that I can't include them all because I don't know which one are more relevant, but I'll happily provide any details you ask. My system is: CPU: AMD Phenom II X4 965 (3400 MHz - 125W) MB: ASUS M4A79XTD - EVO RAM: Corsair Vengeance 8 GB (2 x 4GB) CL8 1600MHz Video: HIS Radeon HD5770 1GB PSU: Corsair 750W HDD: Western Digital 1TB OS: Win 7 Enterprise 64 BIT (also tried with Windows Server 2008 R2 Trial and Win XP)

    Read the article

  • Getting an boot error when starting computer

    - by Rob Avery IV
    I was in the middle of watching a movie on Netflix, then suddenly everything started crashing. First, explorer.exe closed down, then Google chrome. I had multiple things running in the background (Steam, Raptr, etc.). Individuality, each of those apps closed down also. When they did, a small dialog box popped up for each of them, one at a time, saying that it was missing a file, it couldn't run anymore, or something similar to that. It also had some jumbled up "code" with numbers and letters that I couldn't read. Ever since then, everytime I turn my computer on, it will run for a few seconds and give this error "Reboot and select proper boot device or insert boot media in selected boot device and press a key_". No matter how many times I try to reboot it, it always gives me the same error. A day later after this happened I was able to start the computer, but before it booted, it told me that I didn't shut down the computer properly and asked how I wanted to run the OS (Run Windows in Safety Mode, Run Windows Normally, etc.). Once I logged, everything went SUPER slow and everything crashed almost instantly. The only thing I opened was Microsoft Security Essentials and only got in about two clicks before it was "Not Responding". Then, after that the whole computer froze and I had to restart it. Now, it's back to saying what it originally said, "Reboot and select proper boot device or insert boot media in selected boot device and press a key_". I built this PC back in February 2012. Here are the specs: OS: Windows 7 Ultimate CPU: AMD 8-core GPU: Nvidia GTX Force 560 Ti RAM: 16GB Hard Drive: Hitachi Deskstar 750GB I'm usually very good taking care of my PC. I don't download anything that's not from a trusted site or source. I don't open up any spam email or such or go to any harmful websites like porn or stream movies. I am very clean with the things I do with my PC and don't do many DIFFERENT things with it. I use it pretty often especially for video games and doing homework in Eclipse. Also, good to note that I don't have any Norton or antisoftware installed. I have Microsoft Security Essentials installed but never did a scan. Thanks!

    Read the article

  • Why doesn't video run smoothly on my laptop anymore?

    - by andygrunt
    This might be an impossible question to answer remotely but I figure there may be some common causes that people can suggest so I think it's worth asking... Video no longer plays smoothly on my laptop. It used to but not for a while now. For example, playing a video on YouTube is pretty typical: I press play (making sure it's not on HD or even HQ) and the video buffers a little then starts to play. At first it plays fine then the video starts to stutter, turning into a slideshow while the sound continues to play smoothly. If I try playing the same video on my Playstation 3 (which is linked to the same network) it plays smoothly so it can't be the connection. Another example is streaming DivX videos. Again, I wait while it buffers and it starts but very soon, instead of a slideshow, this time the video just plays slowly while the sound continues as normal (instantly getting out of sync). Even if I let the video fully load before pressing play (i.e. it's no longer streaming), it still behaves the same way. I can even let it load 100% then save the file to hard disk and use VLC player to view it, and the same thing happens. I'm using an old laptop running Windows XP. For the past several years it's been connected to the router via Wi-Fi but in the past few days I've changed that to a network cable (like my PS3) but that hasn't helped. Yes, I regularly install various bits and pieces of software but nothing that I can identify as being the cause. So, are there known causes of this sort of behaviour and if so, what can I do to fix it? Thanks. Update to answer a few questions... Laptop Spec' (note: video has played back fine for the majority of time I've had the laptop) Toshiba Satellite 1900-603 (possibly called something else outside the UK) Intel Pentium 4 2.2 Ghz Processor Originally had 512Mb memory but recently doubled that to 1 Gig of memory Graphics: ATI Mobility Radeon 16Mb DDR VRAM Windows XP SP3 (Home edition) Over the years I've done several things to speed it up (disabling indexing etc) and am generally happy with the performance. I also regularly have a clear out of old software (if for no other reason than the laptop only has a 40Gb hard disk) and use CCleaner and Glary Utilities to strip out much of the crap from my system. Also recently (after doubling the memory), I've tried a few new things which might be likely candidates for slowing the video down such as Rocketdock, Jingle keyboard (which gives an old style 'clacky' typewriter sound when I type - love it), SugarSync, Taskbar Shuffle. However, the video doesn't play smoothly even when I try quit all these apps.

    Read the article

  • Do these 3 crashes have something in common?

    - by David U
    I'm running OS X 10.6.8 on a Mac Mini. I tried to install 3 applications today and all 3 installations failed. I am wondering if the failures have something in common. First I installed GraphViz. The installation succeeded, but when I try to open any .dot file, I get a dialog that says GraphViz has quit unexpectedly. Next I installed Doxygen. It installed, but when I try to launch it I get a dialog that tells me Doxywizard quit unexpectedly. After some googling I thought perhaps my system lacked QT, and that was the problem. I downloaded the Qt 4.8.4 packages and installed them. But when I try to launch qtdemo.app, or any of the other apps that came with the qt installation, I get a dialog that says I can't open the app because it's not supported on this type of Mac. I have crash logs from GraphViz and Doxygen. They're long and I think it unnecessary to post them unless they would help someone determine my problem. Thanks Excerpt from System Log, added later: 12/13/12 5:26:21 PM [0x0-0x4f04f].com.apple.DiskImageMounter[1322] 2012-12-13 17:26:21.927 DiskImages UI Agent[1333:903] *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection or ports are invalid 12/13/12 5:30:31 PM [0x0-0x1a01a].org.mozilla.firefox[824] [ConvConfHandler] isPreferred contentType: application/x-apple-diskimage 12/13/12 5:35:32 PM DiskImages UI Agent[1384] *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection or ports are invalid 12/13/12 5:35:32 PM [0x0-0x5a05a].com.apple.DiskImageMounter[1376] 2012-12-13 17:35:32.988 DiskImages UI Agent[1384:903] *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection or ports are invalid 12/13/12 6:07:33 PM DisplayLinkUserAgent[772] (00116500.405)-[DLDistributedNotificationCenter stream:handleEvent:] reconnected. 12/13/12 6:07:33 PM [0x0-0x6c06c].backupd-helper[1446] Not starting Time Machine backup after wake - less than 60 minutes since last backup completed. 12/13/12 6:08:43 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/BrotherPPD.pkg 12/13/12 6:08:48 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/NeoOffice-2.2.3-Intel.pkg 12/13/12 6:08:48 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/NeoOffice-2.2.3-Patch-2-Intel.pkg 12/13/12 6:08:48 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/NeoOffice-2.2.5-Intel.pkg 12/13/12 6:08:48 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/NeoOffice.pkg 12/13/12 6:08:48 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/PIXMA iP6000D 290.pkg 12/13/12 6:14:39 PM com.apple.launchd.peruser.501[359] ([0x0-0x70070].com.att.graphviz[2047]) Job appears to have crashed: Bus error 12/13/12 6:14:41 PM ReportCrash[2056] Saved crash report for Graphviz[2047] version 2.28 (2.28.0) to /Users/duzzell/Library/Logs/DiagnosticReports/Graphviz_2012-12-13-181441_Amun.crash 12/13/12 6:15:19 PM com.apple.launchd.peruser.501[359] ([0x0-0x74074].org.doxygen[2070]) Job appears to have crashed: Bus error 12/13/12 6:15:19 PM ReportCrash[2056] Saved crash report for Doxywizard[2070] version 1.8.2 (???) to /Users/duzzell/Library/Logs/DiagnosticReports/Doxywizard_2012-12-13-181519_Amun.crash

    Read the article

  • What the best way to recover from when your RAID H/W incorrectly thinks a disk is missing

    - by Software Monkey
    I have a Windows 7 system with an MSI motherboard (running the latest AMD BIOS) and two of my four disks (not the system boot disk) configured via the Mobo as RAID-1. After a normal system restart today, the RAID BIOS reports that one of the two drives has been disconnected or has failed. It's not really failed; via recovery tools I can verify that if I take the BIOS out of RAID mode. But I can find no way to re-add the second hard disk to the array and rebuild via the BIOS - the only option seems be to delete the array and recreate it, but I've done that once before and it blows away the disk. It's done this once before, however on a subsequent reboot after double-checking the drive cabling (but not changing anything) and it boot up fine. So I think the mobo RAID is a little bit flaky. At this point I would like to remove the RAID drivers, change to AHCI mode and switch over to using a Windows 7 dynamic mirror disk. But the RAID drivers seem somehow deeply bound into the Windows startup - I can't find anything like the good ol' safe-mode in Windows 7. If I boot from the Win 7 install disk in ACHI mode I can use recovery tools to log in to the Windows 7 installation, so the boot drive it seems fine with ACHI mode. Additionally, I can see all my other disks, run chkdsk on them and they seem to be fine. If I try to boot from the HDD in AHCI mode, it just reboots part way through, presumably because the RAID drivers load and conflict with the BIOS being set to AHCI. So: How do I strip the RAID drivers from my Win 7 installation? If I delete the RAID logical disk, will it really delete partitioning information, or is that just a poorly worded message when it says the data on the disk will be deleted? If I disconnect the 2 disks in a RAID array, then delete the logical disk array, and then reconnect and reboot still in RAID mode, will the disks simply revert to RAID single-disks like my other 2 and then maybe I can leave windows with RAID drivers by operate the disks as singles with 2 of them in a Windows dynamic disk mirrored setup? Does Windows 7 have anything like the Windows XP Repair Install, where it will reinstall the O/S binaries from CD, but leave apps and setup alone. I am really hoping I don't have to do a complete reinstall of Windows 7 - the last one, when I upgraded from XP, took me two days to get everything set up and installed.

    Read the article

  • Vista stuck at "Shutting down..." screen. Any way to get verbose logging?

    - by CapBBeard
    Hi all, My home machine has been running fine for about 3 years, no problems at all. Within the last couple of weeks it's had real trouble trying to shut down. It'll get so far and then just sit there at the "Shutting down..." screen for hours. I've left it overnight, I've tried in safe mode, all to no avail. These days, I just wait for the disk activity to finish up and then hold the power button to turn it off. Feels dirty as, especially because there's a RAID involved! The hardware itself is in pretty good shape and of decent spec; Core 2 Quad, 4GB RAM, 1TB RAID 1+0, so it's not quite like a 7 year old PC coming to end of life! In the last month, hardware hasn't changed except for a new monitor. Admittedly I haven't tried unplugging the monitor but I've never heard of that preventing a shutdown. I might give it a whirl later I guess, as a last resort. I've uninstalled old apps, done updates, checked the event log, looked in device manager, uninstalled all non-present devices, disabled various non-critical devices (imaging, audio etc), unplugged peripherals, stopped non-essential services, unplugged the network, disabled the network adapter entirely, ran chkdsk, verified my RAID, the list goes on. But not a single lead. I'm pretty stumped. It could be hardware, but I have no other evidence to suggest so; when the PC is running, it runs fine. Temperatures are good, gaming is smooth as always, disk performance is fine. Event log even makes it look like the shutdown was completed (gets to the point where the event log service stops). In fact, the PC doesn't appear to realise that I cut the power to it. So my question is, does anyone know if there is a way I can get some verbose output (or a log) from shutdown to give me some idea of what is causing the issue? I'm guessing it's stuck unloading some app/driver but it would be good to get some specifics! Unless anyone has any other ideas? I suspect a reinstall would resolve the issue, however I'm looking to get a new PC built in the next month or so, and the reinstall is going to be quite a big job so I'd rather just wait until then if it comes to that. Would still be nice to get this sorted in the mean time though. Cheers!

    Read the article

  • I want to virtualize my workstation (Tier 1), Looking for Bare Metal Hypervisor for consumer grade components

    - by Chase Florell
    I find myself in this similar bind at least once a year. The bind whereby I'm either upgrading a motherboard, or an OS hard drive. It drives me crazy to have to reinstall Windows, Visual Studio, all my addins, reconfigure my settings etc... every single time. I have a layout and I like and I want to stick with it. My question is... Is there a Bare Metal Hypervisor on the market that will enable me to virtualize my consumer grade workstation? I really want to avoid Host/Client virtualization. Bare Metal is definitely a better way to go for my needs. Is this a good approach, or am I going to suffer some other undesirable side effects by doing this? Clarification My machine has very limited purposes. My primary use is Visual Studio 2010 Professional where I develop ASP.NET MVC Web Applications. The second piece of software that I use (that's system intensive) is Photoshop CS3. Beyond that, my applications are limited to Outlook, Internet Explorer, Firefox, Opera, Chrome, LinqPad, and various other (small) apps. Beyond this, I'm considering working on a node.js project and might run ubuntu on the same hypervisor if possible. System Specs: Gigabyte Motherboard Intel i7 920 12 GB Ram basic 500GB 7200RPM HDD for OS 4 VelociRaptors in Raid 1/0 for build disk Dual GTS250 (512MB) Graphics cards (non SLI) for quad monitors On a side note I also wouldn't be opposed to an alternative suggestion if the limitations are too great. I could install the ESXi (or Zen Server) on my box, and build a separate "thin client" to RDP into the virtual machine. It appears as though RDP supports dual monitors. Edit (Dec 9, 2011) It's been nearly a year since I first asked this question. Since then, there have been a lot of great strides in Hypervisor technology... AND MokaFive is now released for corporate use. I'd love to dig into this question a little more and find out if there is a solid BareMetal Hypervisor for workstations running consumer grade components (IE: not Dell, HP, Lenovo, Etc).

    Read the article

  • Ubuntu stopped recognizing my iPod

    - by flashnode
    Rythmbox on Ubuntu 10.10 used to recognize my 3rd gen Nano and transfer mp3s. Now I plug it in and Ubuntu doesn't pop-up that box that asks what you want to do anymore. It is only recognized if I reboot and the thing is plugged in. Here is the output to 'lsusb -v -s bus:device' Bus 001 Device 008: ID 05ac:1262 Apple, Inc. iPod Nano 3.Gen Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x05ac Apple, Inc. idProduct 0x1262 iPod Nano 3.Gen bcdDevice 0.01 iManufacturer 1 Apple Inc. iProduct 2 iPod iSerial 3 000A27001A670128 bNumConfigurations 2 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 149 bNumInterfaces 3 bConfigurationValue 2 iConfiguration 4 iPod USB Interface bmAttributes 0xc0 Self Powered MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 1 Control Device bInterfaceProtocol 0 iInterface 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 1 (HEADER) bcdADC 1.00 wTotalLength 30 bInCollection 1 baInterfaceNr( 0) 1 AudioControl Interface Descriptor: bLength 12 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 1 wTerminalType 0x0201 Microphone bAssocTerminal 2 bNrChannels 2 wChannelConfig 0x0003 Left Front (L) Right Front (R) iChannelNames 0 iTerminal 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 2 wTerminalType 0x0101 USB Streaming bAssocTerminal 1 bSourceID 1 iTerminal 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 2 bDelay 1 frames wFormatTag 1 PCM AudioStreaming Interface Descriptor: bLength 35 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 2 bBitResolution 16 bSamFreqType 9 Discrete tSamFreq[ 0] 8000 tSamFreq[ 1] 11025 tSamFreq[ 2] 12000 tSamFreq[ 3] 16000 tSamFreq[ 4] 22050 tSamFreq[ 5] 24000 tSamFreq[ 6] 32000 tSamFreq[ 7] 44100 tSamFreq[ 8] 48000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x00c0 1x 192 bytes bInterval 4 bRefresh 0 bSynchAddress 0 AudioControl Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 0 Undefined wLockDelay 0 Undefined Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.01 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 208 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 2 Device Status: 0x0000 (Bus Powered) This ubuntu forum told me to check the automount settings under /apps/nautilus/preferences/media_automount_open in gconf-editor. And I did that. Any clues?

    Read the article

  • Triple (3) Monitors under Linux

    - by widgisoft
    I have a 3 monitor setup (each 1680x1050) via an Nvidia NVS440 (2 GPUs, 2 outputs per GPU totalling 4 outputs); this works fine under Windows XP,7 but caused considerable headaches under Linux (Ubuntu 9.04). I had previously used an XFX 9600GT and the onboard XFX 9300GS to produce the same result but the card was noisy and power hungry and I was hoping that there was some magical switch in the NVS4400 that got rid of this annoying problem - turns out the NVS440 is just 2 cards on one physical PCB :-p (I searched the net high and low for people using this card under Linux but found nothing, if anything the card uses less power and is fan less so I was to benefit from it either way) Anyway, using either set up there were 5 solutions available: Have 3 separate X instances, all un joined Have 3 separate X instances, adjoined by Xinerama Have 2 separate X instances - One using twin-view, both adjoined by Xinerama Have 2 separate X instances - One using twin-view but no Xinerama Have a single Twin-view setup and leave the 3rd screen unplugged :-p The 4rd option, using 2 separate X instances and twinview (but no xinerama) was the best balance in terms of performance and usability but caused 2 really annoying issues You couldn't control (without altering the shortcuts) which screen an application opened onto - and once it was opened you couldn't move it to another screen without opening up terminal and forcing it to move Nvidia's overriding or falsifying of Xinerama breaks and the 2 screens joined by Twin view behave like a single huge screen causing popups to open in the middle of both screens and maximising of windows stretches to the width of the first 2 screens Firefox can only run one instance as the same user so having multiple firefox windows requires at least 2 users The second option "feels" like the right option, but OpenGL is basically disabled and playing any sort of game or even running anything graphical causes a huge performance drop and instability - even trying to run a basic emulator for gba or gens just causes the system to fall over. It works just enough to stare at your desktop and do nothing but as soon as you start doing some work - opening windows, dragging things around - running multiple copies of firefox it just really feels slow. The last open, only going dual screen works perfectly and everything performs as required, full GPU acceleration - two logical screen spaces - perfect, just make it work across GPUs like windows! :-p Anyway, I know RandR was supposed to pick up the slack when it would introduced GPU objects of sorts to allow multiple GPUs to be stitched together to create one huge desktop at a much deeper layer than Xinerama. I was wondering if this has now been fixed (I noticed X server 1.7 is out) and whether anyone has got it running successfully? Again, my requirements are: One huge desktop to drag any window across Maximising of windows to each screen (as XP does) Running fullscreen apps on the primary screen and disabling the mouse from moving onto the others or on all 3 stretched Finally as a side note; I am aware of the Matrox triple (and dual) head splitter but even the price they go for on eBay is more than I can afford atm, my argument: I shouldn't have to buy extra hardware to get something to work on Linux when it's something that's existed in the windows world for a long time (can you tell I don't get on with X :-p); If I had the cash I'd have bought the latest version of this box already (the new version finally supports large resolutions as the displays I have 1680x1050 each).

    Read the article

  • How to temporary disable a mirror video driver in windows xp registry

    - by happy clicker
    Because its a lot of text, I will ask first my question and then explain what the base problem is. Perhaps someone can give me a solution to the base problem: Is there is a way to temporary disable mirror video drivers (through registry or so), without uninstalling the corresponding software. I tested changing the enumeration in LocalMachine\Hardware\DeviceMap\Video but after reboot always the old configuration is restored. Explanation of the base problem We are working on a wpf-project for a department of a big company. There we have the problem that WPF renders only in software mode, although the hardware they have, must support hardware rendering (Tier 2). After searching for a solution to the problem, we found out that direct 3d does not work properly and we think thats why WPF can only use SW-rendering. In dxdiag.exe the direct3d-acceleration is enabled, but if we start the test-routine it always fails saying that it has not enough memory (it says memory, not video memory!). I have seen there 3 different types of pc’s (they have some hundreds of each type) and every type shows the exactly same behavior. We tried to update all the drivers, also dx (Version 9.0c) and we searched a lot in the web but could not find a solution. All the pcs have Intel Dual-Core processors or better, one type has an Intel gma 9000 graphics card the other two types have actual ATI and NVidia graphic-cards with 256MB onboard memory. Also the system memory is at least 2GB. Windows is XPSP3. The pc’s are of two different manufacturers. Because we see the exactly same behavior on every computer of this three very different computer-types, we don’t think that this is a driver or a direct x problem. What we’ve found in other newsgroups is, that direct x could be disturbed through mirror-video drivers such as NetMeeting, VNC and other remote desktop-installations. In the registry, we see under LocalMachine\Hardware\DeviceMap\Video a lot of such mirror-entries and we find also the definitions in the CurrentControlSet\Control\Video-Section (However this drivers are not shown in the hardware panel of the os). We can have admin-rights to one of these computers to test if disabling these drivers would help, but we must not change the configuration so that some software does not work after the tests. Therefore I cannot uninstall any software because I have not the mediums, licenses or knowhow to reinstall those apps. The support of this company however will only begin to work, if I can tell them what the real problem is. Thats why we search for a way to disable these mirror-drivers (or a hint to solve the dx problem if we are on a false trace)

    Read the article

  • Exchange-Server Query

    - by Rudi Kershaw
    First, a little background. I've recently been taken on as a web and software developer for a small company, who has no other in-house IT support. They've been asking my opinion on lots of IT subjects that are quite far out of my comfort zone. I'm definitely not a network admin. Their IT consultancy contractor is pushing them to upgrade their dedicated exchange server, even though it seems like the one they currently have has a lot of life left in it and is running problem free. They say it's "coming to the natural end of it's life". They want to install a monster with a Xeon E5-2420, 32GB RAM, 2x 1TB HDDs, Windows Server 2012 and Microsoft Exchange 2010. They want to charge a small fortune for it. Basically, this system seems massively over the top seeing as it won't be doing anything else other than running as an exchange server for a company with less than 25 email accounts. My employers also have a file server system in-house that hosts three web apps, an SQL server, their local domain, print server and shared folders. That machine is using the same specs as the proposed new one, and it is barely using any of it's potential. I asked if Microsoft Exchange 2010 could be installed on their file server, but they said that MS Exchange can't run on the same system as an SQL server because for some reason they will eat up each others resources (even though the SQL server isn't touching 1% of the current system's CPU or RAM). My question is really, are they trying to rip my employers off? Could MS Exchange be installed on their other server (on a virtual instance or not), or does the old one even need replacing at all? Going with their current suggestion will cost the company in excess of £6k, and it seems entirely unnecessary. I apologies, because I know this is probably a little thin on details, but if I carry on I could end up writing a massive essay that no-one will want to read. I've been doing my research, but I'm not knowledgeable enough make any hard decisions. Let me know if you need any more details. Thank you for any help you can offer. Further Details: The new exchange would need to support Outlook Web App, 25 users, a few public mailboxes, and email exchange with Blackberries.

    Read the article

  • iTunes and Hulu Playback Choppy and Slow?

    - by Bart Silverstrim
    Specs: Windows XP, latest updates 1.7 ghz Pentium 4 1 gig ram DirectX 9.0c NVIDIA GeForce FX 5200 with 256 meg RAM OpenGL 2.1 The story: Okay, I had an older system laying around that I figured I would try turning into a mini-media system to connect to our TV. I put together a lot of older parts, got it into working order, etc. and hooked it up and voila'...slower, but usable system that displayed to the TV. It could run some things decently. I put in iTunes, it played video okay. Not great, but okay. Played Hulu and since we have a 1Mb download rate, the minimum for their site, there were some choppy moments when watching their shows, but I found that (sadly) changing resolution to 800x600 seemed to help with the issue when running full screen. I downloaded the application called Boxee and installed it. It wouldn't run; apparently the video card in the system supported OpenGL 1.2, and needed at least 1.4. I bought a cheap card, the 5200, with four times the memory in it and support for OpenGL 2.1. Installed, everything seemed fine. iTunes seemed to run fine, the video driver (PNY video card) came with OpenGL 2.1, and Boxee finally ran. I then upgraded to the latest drivers for the video card and ran the DirectX updater from MS. After that, the OpenGL Extension Viewer wouldn't run. It just stayed as an icon in the task bar. Also, any and all videos in iTunes stuttered and went out of sync horribly. Unwatchable. I tried watching Hulu video in Boxee, and it displayed video like it was a series of stills in a very bad powerpoint. Playing straightforward audio-only came through fine, no stutters no hiccups. I tried system restore to roll back updates to pre-directX updates (I thought that seemed to be the time that triggered the weird behavior), no joy. I tried uninstalling and reinstalling the video drivers. I installed updated audio drivers (ensoniq audiopci), nothing helped. I finally wiped the drive last night and tried reinstalling everything and restoring my iTunes content via an import from a backup. Fresh install, no updater on the video card or directx. the problem was still there although I haven't tested Hulu, the iTunes player is still stuttering like crazy if I play video, fine if I play audio. I know the processor isn't high in heft, but with one gig of RAM and the fact that it seemed to do okay before I thought that the problem must be software related. Has anyone else run into this sort of issue and have a solution other than "buy a new computer"? What specs seem to work with video at the low end for you? Right now the system is of little use other than keeping my music library and iTunes apps synced with my iPod.

    Read the article

  • SQL Express 2008 R2 on Amazon EC2 instance: tons of free memory, poor performance

    - by gravyface
    The old SQL Express 2005 was running on a low-end single Xeon CPU Dell server, RAID 5 7200 disks, 2 GB RAM (SBS 2003). I have not done any baseline measurements on the old physical server, but the Web app is used by half a dozen people (maybe 2 concurrently), so I figured "how bad can an Amazon EC2 instance be?". It's pretty horrible: a difference of 8 seconds of load time on one screen. First of all, I'm not a SQL guru, but here's what I've tried: Had a Small Instance, now running a c1.medium (High Cpu Medium) Windows 2008 32-bit R2 EBS-backed instance running IIS 7.5 and SQL Express 2008 R2. No noticeable improvement. Changed Page File from fixed 256 to Automatic. Setup a Striped Mirror from within Disk Management with two attached 1 GB EBS volumes. Moved database and transaction log, left everything else on the boot EBS volume. No noticeable change. Looked at memory, ~1000 MB of physical memory free (1.7 GB total). Changed SQL instance to use a minimum of 1024 RAM; restarted server, no change in memory usage. SQL still only using ~28MB of RAM(!). So I'm thinking: this database is tiny (28MB), why isn't the whole thing cached in RAM? Surely that would speed up performance. The transaction log is 241 MB. Seems kind of large in comparison -- has this not been committed? Is it a cause of performance degradation? I recall something about Recovery Models and log sizes somewhere in my travels, but not positive. Another thing: the old server was running SQL Express 2005. Not sure if that has any impact, but I tried changing the compatibility level from SQL 2000 to 2008, but that had no effect. Anyways, what else can I try here? Seems ridiculous to throw more virtual hardware at this thing. I know I/O is going to be rough on EBS volumes, but surely others are successfully running small .NET/SQL apps on reasonably priced instances?

    Read the article

  • Why is code quality not popular?

    - by Peter Kofler
    I like my code being in order, i.e. properly formatted, readable, designed, tested, checked for bugs, etc. In fact I am fanatic about it. (Maybe even more than fanatic...) But in my experience actions helping code quality are hardly implemented. (By code quality I mean the quality of the code you produce day to day. The whole topic of software quality with development processes and such is much broader and not the scope of this question.) Code quality does not seem popular. Some examples from my experience include Probably every Java developer knows JUnit, almost all languages implement xUnit frameworks, but in all companies I know, only very few proper unit tests existed (if at all). I know that it's not always possible to write unit tests due to technical limitations or pressing deadlines, but in the cases I saw, unit testing would have been an option. If a developer wanted to write some tests for his/her new code, he/she could do so. My conclusion is that developers do not want to write tests. Static code analysis is often played around in small projects, but not really used to enforce coding conventions or find possible errors in enterprise projects. Usually even compiler warnings like potential null pointer access are ignored. Conference speakers and magazines would talk a lot about EJB3.1, OSGI, Cloud and other new technologies, but hardly about new testing technologies or tools, new static code analysis approaches (e.g. SAT solving), development processes helping to maintain higher quality, how some nasty beast of legacy code was brought under test, ... (I did not attend many conferences and it propably looks different for conferences on agile topics, as unit testing and CI and such has a higer value there.) So why is code quality so unpopular/considered boring? EDIT: Thank your for your answers. Most of them concern unit testing (and has been discussed in a related question). But there are lots of other things that can be used to keep code quality high (see related question). Even if you are not able to use unit tests, you could use a daily build, add some static code analysis to your IDE or development process, try pair programming or enforce reviews of critical code.

    Read the article

  • Azure storage: Uploaded files with size zero bytes

    - by Fabio Milheiro
    When I upload an image file to a blob, the image is uploaded apparently successfully (no errors). When I go to cloud storage studio, the file is there, but with a size of 0 (zero) bytes. The following is the code that I am using: // These two methods belong to the ContentService class used to upload // files in the storage. public void SetContent(HttpPostedFileBase file, string filename, bool overwrite) { CloudBlobContainer blobContainer = GetContainer(); var blob = blobContainer.GetBlobReference(filename); if (file != null) { blob.Properties.ContentType = file.ContentType; blob.UploadFromStream(file.InputStream); } else { blob.Properties.ContentType = "application/octet-stream"; blob.UploadByteArray(new byte[1]); } } public string UploadFile(HttpPostedFileBase file, string uploadPath) { if (file.ContentLength == 0) { return null; } string filename; int indexBar = file.FileName.LastIndexOf('\\'); if (indexBar > -1) { filename = DateTime.UtcNow.Ticks + file.FileName.Substring(indexBar + 1); } else { filename = DateTime.UtcNow.Ticks + file.FileName; } ContentService.Instance.SetContent(file, Helper.CombinePath(uploadPath, filename), true); return filename; } // The above code is called by this code. HttpPostedFileBase newFile = Request.Files["newFile"] as HttpPostedFileBase; ContentService service = new ContentService(); blog.Image = service.UploadFile(newFile, string.Format("{0}{1}", Constants.Paths.BlogImages, blog.RowKey)); Before the image file is uploaded to the storage, the Property InputStream from the HttpPostedFileBase appears to be fine (the size of the of image corresponds to what is expected! And no exceptions are thrown). And the really strange thing is that this works perfectly in other cases (uploading Power Points or even other images from the Worker role). The code that calls the SetContent method seems to be exactly the same and file seems to be correct since a new file with zero bytes is created at the correct location. Does any one have any suggestion please? I debugged this code dozens of times and I cannot see the problem. Any suggestions are welcome! Thanks

    Read the article

  • Better way to "find parent" and if statements

    - by Luke Abell
    I can't figure out why this isn't working: $(document).ready(function() { if ($('.checkarea.unchecked').length) { $(this).parent().parent().parent().parent().parent().parent().parent().removeClass('checked').addClass('unchecked'); } else { $(this).parent().parent().parent().parent().parent().parent().parent().removeClass('unchecked').addClass('checked'); } }); Here's a screenshot of the HTML structure: http://cloud.lukeabell.com/JV9N (Updated with correct screenshot) Also, there has to be a better way to find the parent of the item (there are multiple of these elements on the page, so I need it to only effect the one that is unchecked) Here's some other code that is involved that might be important: $('.toggle-open-area').click(function() { if($(this).parent().parent().parent().parent().parent().parent().parent().hasClass('open')) { $(this).parent().parent().parent().parent().parent().parent().parent().removeClass('open').addClass('closed'); } else { $(this).parent().parent().parent().parent().parent().parent().parent().removeClass('closed').addClass('open'); } }); $('.checkarea').click(function() { if($(this).hasClass('unchecked')) { $(this).removeClass('unchecked').addClass('checked'); $(this).parent().parent().parent().parent().parent().parent().parent().removeClass('open').addClass('closed'); } else { $(this).removeClass('checked').addClass('unchecked'); $(this).parent().parent().parent().parent().parent().parent().parent().removeClass('closed').addClass('open'); } }); (Very open to improvements for that section as well) Thank you so much! Here's a link to where this is all happening: http://linkedin.guidemytech.com/sign-up-for-linkedin-step-2-set-up-linkedin-student/ Update: I've improved the code from the comments, but still having issues with that first section not working. $(document).ready(function() { if ($('.checkarea.unchecked').length) { $(this).parents('.whole-step').removeClass('checked').addClass('unchecked'); } else { $(this).parents('.whole-step').removeClass('unchecked').addClass('checked'); } }); -- $('.toggle-open-area').click(function() { if($(this).parent().parent().parent().parent().parent().parent().parent().hasClass('open')) { $(this).parents('.whole-step').removeClass('open').addClass('closed'); } else { $(this).parents('.whole-step').removeClass('closed').addClass('open'); } }); $('.toggle-open-area').click(function() { $(this).toggleClass('unchecked checked'); $(this).closest(selector).toggleClass('open closed'); }); $('.checkarea').click(function() { if($(this).hasClass('unchecked')) { $(this).removeClass('unchecked').addClass('checked'); $(this).parent().parent().parent().parent().parent().parent().parent().removeClass('open').addClass('closed'); } else { $(this).removeClass('checked').addClass('unchecked'); $(this).parent().parent().parent().parent().parent().parent().parent().removeClass('closed').addClass('open'); } });

    Read the article

  • Reverse proxy for a REST web service using ADFS/AD and WebApi

    - by Kai Friis
    I need to implement a reverse proxy for a REST webservice behind a firewall. The reverse proxy should authenticate against an enterprise ADFS 2.0 server, preferably using claims in .net 4.5. The clients will be a mix of iOS, Android and web. I’m completely new to this topic; I’ve tried to implement the service as a REST service using WebApi, WIF and the new Identity and Access control in VS 2012, with no luck. I have also tried to look into Brock Allen’s Thinktecture.IdentityModel.45, however then my head was spinning so I didn’t see the difference between it and Windows Identity Foundation with the Identity and Access control. So I think I need to step back and get some advice on how to do this. There are several ways to this, as far as I understand it. In hardware. Set up our Citrix Netscaler as a reverse proxy. I have no idea how to do that, however if it’s a good solution I can always hire someone who knows… Do it in the webserver, like IIS. I haven’t tried it; do not know if it will work. Create a web service to do it. 3.1 Implement it as a SOAP service using WCF. As I understand it ADFS do not support REST so I have to use SOAP. The problem is mobile device do not like SOAP, neither do I… However if it’s the best way, I have to do it. 3.2 Use Azure Access Control Service. It might work, however the timing is not good. Our enterprise is considering several cloud options, and us jumping on the azure wagon on our own might not be the smartest thing to do right now. However if it is the only options, we can do it. I just prefer not to use it right now. Right now I feel there are too many options, and I do not know which one will work. If someone can point me in the right directions, which path to pursue, I would be very grateful.

    Read the article

  • Advice for Architecture Design Logic for software application

    - by Prasad
    Hi, I have a framework of basic to complex set of objects/classes (C++) running into around 500. With some rules and regulations - all these objects can communicate with each other and hence can cover most of the common queries in the domain. My Dream: I want to provide these objects as icons/glyphs (as I learnt recently) on a workspace. All these objects can be dragged/dropped into the workspace. They have to communicate only through their methods(interface) and in addition to few iterative and conditional statements. All these objects are arranged finally to execute a protocol/workflow/dataflow/process. After drawing the flow, the user clicks the Execute/run button. All the user interaction should be multi-touch enabled. The best way to show my dream is : Jeff Han's Multitouch Video. consider Jeff is playing with my objects instead of the google maps. :-) it should be like playing a jigsaw puzzle. Objective: how can I achieve the following while working on this final product: a) the development should be flexible to enable provision for web services b) the development should enable easy web application development c) The development should enable client-server architecture - d) further it should also enable mouse based drag/drop desktop application like Adobe programs etc. I mean to say: I want to economize on investments. Now I list my efforts till now in design : a) Created an Editor (VB) where the user writes (manually) the object / class code b) On Run/Execute, the code is copied into a main() function and passed to interpreter. c) Catch the output and show it in the console. The interpreter can be separated to become a server and the Editor can become the client. This needs lot of standard client-server architecture work. But some how I am not comfortable in the tightness of this system. Without interpreter is there much faster and better embeddable solution to this? - other than writing a special compiler for these objects. Recently learned about AXIS-C++ can help me - looks like - a friend suggested. Is that the way to go ? Here are my questions: (pl. consider me a self taught programmer and NOT my domain) a) From the stage of C++ objects to multi-touch product, how can I make sure I will develop the parallel product/service models as well.? What should be architecture aspects I should consider ? b) What technologies are best suited for this? c) If I am thinking of moving to Cloud Computing, how difficult/ how redundant / how unnecessary my efforts will be ? d) How much time in months would it take to get the first beta ? I take the liberty to ask if any of the experts here are interested in this project, please email me: [email protected] Thank you for any help. Looking forward.

    Read the article

  • Job queue manager with RPC interface

    - by admr
    I need a job queue manager that I can control over the Internet. It should be able to execute and stop processes, check on their status (ideally notice and execute some code when a process exits), respond to commands and also be able to report back to a server. Background: I have a GWT application that allows to create jobs to execute on a cloud instance (currently EC2). I want to push a "job packet" (data for a process to operate on etc) to S3, start a Linux EC2 instance (or use one that's already running), and tell a job manager on the instance to execute that job (possibly parallel to other jobs). It should then pull the "job packet" from S3, run a process that operates on that data and report back to the server that is running the server part of my GWT application with some information (e.g. exit code, stdout, stderr). If I have to write e.g. stdour/err to a file from the process and read that file, that's OK too. I would really like the manager to be "close" to the processes it runs, meaning I want to avoid using something like Runtime.exec from the JDK. It seems like I would have to do that if I used Quartz for example. I'm fine with the calls in both directions being asynchronous. I'm fine with any reasonable technology for the calls as long as I can easily build an interface for that in my GWT server side (e.g. HTTP requests to a servlet over SSL would be nice and trivial). The job manager does not need to have a very sophisticated queueing system. Running several processes either sequentially or in parallel should be fine. Determining how much compute time a process received during its lifetime would be nice (AFAIK, this might be challenging). I did not yet find any existing software that does this, including http://java-source.net/open-source/job-schedulers. I suspect I might have to build an RPC interface (with authentication etc, of course) around a job manager; maybe use something like Apache Commons Exec. In that case, I would prefer Java or Python for the job manager part. I would be happy to hear suggestions for either the former or latter scenario!

    Read the article

  • NullPointerException using datanucleus-json with S3

    - by Matt
    I'm using datanucleus 3.2.7 from Maven, trying to use the Amazon S3 JPA provider. I can successfully write data into S3, but querying either by using "SELECT u FROM User u" or "SELECT u FROM User u WHERE id = :id" causes a NullPointerException to be thrown. Using the RDBMS provider, everything works perfectly. Is there something I'm doing wrong? Main.java EntityManagerFactory factory = Persistence.createEntityManagerFactory("MyUnit"); EntityManager entityManager = factory.createEntityManager(); Query query = entityManager.createQuery("SELECT u FROM User u", User.class); List<User> users = query.getResultList(); // Null pointer exception here for(User u:users) System.out.println(u); User.java package test; import javax.persistence.*; @Entity @Table(name = "User") public class User { @Id public String id; public String name; public User(String id, String name) { this.id = id; this.name = name; } public String toString() { return id+" : "+name; } } persistence.xml <?xml version="1.0" encoding="UTF-8" ?> <persistence xmlns="http://java.sun.com/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd" version="1.0"> <persistence-unit name="MyUnit"> <class>test.User</class> <exclude-unlisted-classes /> <properties> <properties> <property name="datanucleus.ConnectionURL" value="amazons3:http://s3.amazonaws.com/" /> <property name="datanucleus.ConnectionUserName" value="xxxxx" /> <property name="datanucleus.ConnectionPassword" value="xxxxx" /> <property name="datanucleus.cloud.storage.bucket" value="my-bucket" /> </properties> <property name="datanucleus.autoCreateSchema" value="true" /> </properties> </persistence-unit> </persistence> Exception java.lang.NullPointerException at org.datanucleus.NucleusContext.isClassWithIdentityCacheable(NucleusContext.java:1840) at org.datanucleus.ExecutionContextImpl.getObjectFromLevel2Cache(ExecutionContextImpl.java:5287) at org.datanucleus.ExecutionContextImpl.getObjectFromCache(ExecutionContextImpl.java:5191) at org.datanucleus.ExecutionContextImpl.findObject(ExecutionContextImpl.java:3137) at org.datanucleus.store.json.CloudStoragePersistenceHandler.getObjectsOfCandidateType(CloudStoragePersistenceHandler.java:367) at org.datanucleus.store.json.query.JPQLQuery.performExecute(JPQLQuery.java:94) at org.datanucleus.store.query.Query.executeQuery(Query.java:1786) at org.datanucleus.store.query.Query.executeWithMap(Query.java:1690) at org.datanucleus.api.jpa.JPAQuery.getResultList(JPAQuery.java:194) at test.Main.main(Main.java:16)

    Read the article

  • change attributes of SVG graph without refresh

    - by Mike Hudak
    Hello, I have a simple SVG graph generated by GraphViz: <?xml version="1.0" encoding="UTF-8" standalone="no"?> <!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN" "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd"> <!-- Generated by graphviz version 2.26.3 (20100126.1600) --> <!-- Title: G Pages: 1 --> <svg width="138pt" height="168pt" viewBox="0.00 0.00 138.00 168.00" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink"> <g id="graph1" class="graph" transform="scale(1 1) rotate(0) translate(4 164)"> <title>G</title> <polygon fill="white" stroke="white" points="-4,5 -4,-164 135,-164 135,5 -4,5"/> <!-- Node1 --> <g id="node1" class="node"><title>Node1</title> <a xlink:href="http://localhost/viz/applet.php" xlink:title="Internet"> <image xlink:href="images/cloud.png" width="130px" height="77px" preserveAspectRatio="xMinYMin meet" x="0" y="-159.5"/> <text text-anchor="middle" x="65" y="-116.4" font-family="Times New Roman,serif" font-size="14.00">&#39;.$Internet.&#39;</text> </a> </g> <!-- Node2 --> <g id="node2" class="node"><title>Node2</title> <a xlink:href="http://localhost/viz/applet.php"> <image xlink:href="images/file server.png" width="44px" height="45px" preserveAspectRatio="xMinYMin meet" x="43" y="-45.5"/> </a> </g> <!-- Node1&#45;&gt;Node2 --> <g id="edge2" class="edge"><title>Node1&#45;&gt;Node2</title> <a xlink:title="Bandwidth: 1544kbps&#10;Using link: 12%&#10;VOIP calls: 4&#10;Packet rate: 10000&#10;Packet loss: 2"> <path fill="none" stroke="black" d="M65,-82.2678C65,-73.5404 65,-64.358 65,-55.8964"/> <polygon fill="black" stroke="black" points="68.5001,-55.6524 65,-45.6524 61.5001,-55.6525 68.5001,-55.6524"/> </a> </g> </g> </svg> I want to change some atributes: for example " VOIP calls: 4 " -changing "4" to value from Database(LDAP) without refreshing whole SVG graph <a xlink:title="Bandwidth: 1544kbps&#10;Using link: 12%&#10;VOIP calls: 4&#10;Packet rate: 10000&#10;Packet loss: 2"> Thank you for your answers

    Read the article

  • jQuery: Giving each matched element an unique ID

    - by AnGafraidh
    I am writing an 'inline translator' application to be used with a cloud computing platform to extend non-supported languages. The majority of this uses jQuery to find the text value, replace it with the translation, then append the element with a span tag that has an unique ID, to be used elsewhere within the application. The problem arises however, when there are more than one element, say , that have the exact same value to be translated (matched elements). What happens in the function in question is that it puts all matched elements in the same span, taking the second, third, fourth, etc. out of their parent tags. My code is pretty much like this example: <script src='jquery-1.4.2.js'></script> <script> jQuery.noConflict(); var uniqueID='asdfjkl'; jQuery(window).ready(function() { var myQ1 = jQuery("input[id~=test1]"); myClone=myQ1.clone(); myClone.val('Replaced this button'); myQ1.replaceWith('<span id='+uniqueID+'></span>'); jQuery('#'+uniqueID).append(myClone); }); </script> <table> <tr><td> <input id='test1' type='button' value="I'm a button!"></input> &nbsp; <input id='test2' type='button' value="And so am I"></input> </tr></td> <tr><td> <input id='test1' type='button' value="I'm a button!"></input> </tr></td> </table> As a workaround, I've experimented with using a loop to create a class for each span, rising in increment until jQuery("input[id~=test1]").length, but I can't seem to get anything I do to work. Is there any way to give each matched element an unique ID? My fluency in jQuery is being put to the test! Thanks for any help in advance. Aaron

    Read the article

  • Getting up to speed on modern architecture

    - by Matt Thrower
    Hi, I don't have any formal qualifications in computer science, rather I taught myself classic ASP back in the days of the dotcom boom and managed to get myself a job and my career developed from there. I was a confident and, I think, pretty good programmer in ASP 3 but as others have observed one of the problems with classic ASP was that it did a very good job of hiding the nitty-gritty of http so you could become quite competent as a programmer on the basis of relatively poor understanding of the technology you were working with. When I changed on to .NET at first I treated it like classic ASP, developing stand-alone applications as individual websites simply because I didn't know any better at the time. I moved jobs at this point and spent the next several years working on a single site whose architecture relied heavily on custom objects: in other words I gained a lot of experience working with .NET as a middle-tier development tool using a quite old-fashioned approach to OO design along the lines of the classic "car" class example that's so often used to teach OO. Breaking down programs into blocks of functionality and basing your classes and methods around that. Although we worked under an Agile approach to manage the work the whole setup was classic client/server stuff. That suited me and I gradually got to grips with .NET and started using it far more in the manner that it should be, and I began to see the power inherent in the technology and precisely why it was so much better than good old ASP 3. In my latest job I have found myself suddenly dropped in at the deep end with two quite young, skilled and very cutting-edge programmers. They've built a site architecture which is modelling along a lot of stuff which is new to me and which, in truth I'm having a lot of trouble understanding. The application is built on a cloud computing model with multi-tenancy and the architecture is all loosely coupled using a lot of interfaces, factories and the like. They use nHibernate a lot too. Shortly after I joined, both these guys left and I'm now supposedly the senior developer on a system whose technology and architecture I don't really understand and I have no-one to ask questions of. Except you, the internet. Frankly I feel like I've been pitched in at the deep end and I'm sinking. I'm not sure if this is because I lack the educational background to understand this stuff, if I'm simply not mathematically minded enough for modern computing (my maths was never great - my approach to design is often to simply debug until it works, then refactor until it looks neat), or whether I've simply been presented with too much of too radical a nature at once. But the only way to find out which it is is to try and learn it. So can anyone suggest some good places to start? Good books, tutorials or blogs? I've found a lot of internet material simply presupposes a level of understanding that I just don't have. Your advice is much appreciated. Help a middle-aged, stuck in the mud developer get enthusastic again! Please!

    Read the article

  • Creating a multiplatform webapp with HTML5 and Google maps

    - by Bart L.
    I'm struggling how to develop a webapp for Android and iOS. My first app was a simple todo app which was easy to test in my browser and it only used html, javascript and css. However, I have to create an app which uses Google Maps Api to get the location. I created a simple html5 page to test which places a marker on a map. It works fine when testing it on my local server. But when I create an .apk file for Android, the app doesn't work. So I'm wondering, isn't it possible to use it like this? Do I have the use the phonegap libraries to use their geolocation library? And if so, how do you handle the development of a webapp in phonegap for multiple OS? Do you have to install an Android environment and an iOS environment to each include the right phonegap library and to test them properly? Update: I use the following code on my webserver and it works perfectly. When I upload it in a zip-folder to the photogap cloud and install the APK file on my phone, it doesn't work. <!DOCTYPE html> <html> <head> <meta charset="utf-8"> <title>Simple Geo test</title> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.8/jquery.min.js"></script> </head> <body> <script type="text/javascript" src="http://maps.google.com/maps/api/js?sensor=true"></script> <script> function success(position) { var mapcanvas = document.createElement('div'); mapcanvas.id = 'mapcontainer'; mapcanvas.style.height = '200px'; mapcanvas.style.width = '200px'; document.querySelector('article').appendChild(mapcanvas); var coords = new google.maps.LatLng(position.coords.latitude, position.coords.longitude); var options = { zoom: 15, center: coords, mapTypeControl: false, navigationControlOptions: { style: google.maps.NavigationControlStyle.SMALL }, mapTypeId: google.maps.MapTypeId.ROADMAP }; var map = new google.maps.Map(document.getElementById("mapcontainer"), options); var marker = new google.maps.Marker({ position: coords, map: map, title:"You are here!" }); } if (navigator.geolocation) { navigator.geolocation.getCurrentPosition(success); } else { error('Geo Location is not supported'); } </script> <article></article> </body> </html>

    Read the article

  • Efficiently fetching and storing tweets from a few hundred twitter profiles?

    - by MSpreij
    The site I'm working on needs to fetch the tweets from 150-300 people, store them locally, and then list them on the front page. The profiles sit in groups. The pages will be showing the last 20 tweets (or 21-40, etc) by date, group of profiles, single profile, search, or "subject" (which is sort of a different group.. I think..) a live, context-aware tag cloud (based on the last 300 tweets of the current search, group of profiles, or single profile shown) various statistics (group stuffs, most active, etc) which depend on the type of page shown. We're expecting a fair bit of traffic. The last, similar site peaked at nearly 40K visits per day, and ran intro trouble before I started caching pages as static files, and disabling some features (some, accidently..). This was caused mostly by the fact that a page load would also fetch the last x tweets from the 3-6 profiles which had not been updated the longest.. With this new site I can fortunately use cron to fetch tweets, so that helps. I'll also be denormalizing the db a little so it needs less joins, optimize it for faster selects instead of size. Now, main question: how do I figure out which profiles to check for new tweets in an efficient manner? Some people will be tweeting more often than others, some will tweet in bursts (this happens a lot). I want to keep the front page of the site as "current" as possible. If it comes to, say, 300 profiles, and I check 5 every minute, some tweets will only appear an hour after the fact. I can check more often (up to 20K) but want to optimize this as much as possible, both to not hit the rate limit and to not run out of resources on the local server (it hit mysql's connection limit with that other site). Question 2: since cron only "runs" once a minute, I figure I have to check multiple profiles each minute - as stated, at least 5, possibly more. To try and spread it out over that minute I could have it sleep a few seconds between batches or even single profiles. But then if it takes longer than 60 seconds altogether, the script will run into itself. Is this a problem? If so, how can I avoid that? Question 3: any other tips? Readmes? URLs?

    Read the article

< Previous Page | 436 437 438 439 440 441 442 443 444 445 446 447  | Next Page >