Search Results

Search found 12753 results on 511 pages for 'small'.

Page 440/511 | < Previous Page | 436 437 438 439 440 441 442 443 444 445 446 447  | Next Page >

  • What Counts For a DBA: Replaceable

    - by Louis Davidson
    Replaceable is what every employee in every company instinctively strives not to be. Yet, if you’re an irreplaceable DBA, meaning that the company couldn’t find someone else who could do what you do, then you’re not doing a great job. A good DBA is replaceable. I imagine some of you are already reaching for the lighter fluid, about to set the comments section ablaze, but before you destroy a perfectly good Commodore 64, read on… Everyone is replaceable, ultimately. Anyone, anywhere, in any job, could be sitting at their desk reading this, blissfully unaware that this is to be their last day at work. Morbidly, you could be about to take your terminal breath. Ideally, it will be because another company suddenly offered you a truck full of money to take a new job, forcing you to bid a regretful farewell to your current employer (with barely a “so long suckers!” left wafting in the air as you zip out of the office like the Wile E Coyote wearing two pairs of rocket skates). I’ve often wondered what it would be like to be present at the meeting where your former work colleagues discuss your potential replacement. It is perhaps only at this point, as they struggle with the question “What kind of person do we need to replace old Wile?” that you would know your true worth in their eyes. Of course, this presupposes you need replacing. I’ve known one or two people whose absence we adequately compensated with a small rock, to keep their old chair from rolling down a slight incline in the floor. On another occasion, we bought a noise-making machine that frequently attracted attention its way, with unpleasant sounds, but never contributed anything worthwhile. These things never actually happened, of course, but you take my point: don’t confuse replaceable with expendable. Likewise, if the term “trained seal” comes up, someone they can teach to follow basic instructions and push buttons in the right order, then the replacement discussion is going to be over quickly. What, however, if your colleagues decide they’ll need a super-specialist to replace you. That’s a good thing, right? Well, usually, in my experience, no it is not. It often indicates that no one really knows what you do, or how. A typical example is the “senior” DBA who built a system just before 16-bit computing became all the rage and then settled into a long career managing it. Such systems are often central to the company’s operations and the DBA very skilled at what they do, but almost impossible to replace, because the system hasn’t evolved, and runs on processes and routines that others no longer understand or recognize. The only thing you really want to hear, at your replacement discussion, is that they need someone skilled at the fundamentals and adaptable. This means that the person they need understands that their goal is to be an excellent DBA, not a specialist in whatever the-heck the company does. Someone who understands the new versions of SQL Server and can adapt the company’s systems to the way things work today, who uses industry standard methods that any other qualified DBA/programmer can understand. More importantly, this person rarely wants to get “pigeon-holed” and so documents and shares the specialized knowledge and responsibilities with their teammates. Being replaceable doesn’t mean being “dime a dozen”. The company might need four people to take your place due to the depth of your skills, but still, they could find those replacements and those replacements could step right in using techniques that any decent DBA should know. It is a tough question to contemplate, but take some time to think about the sort of person that your colleagues would seek to replace you. If you think they would go looking for a “super-specialist” then consider urgently how you can diversify and share your knowledge, and start documenting all the processes you know as if today were your last day, because who knows, it just might be.

    Read the article

  • Things I've noticed with DVCS

    - by Wes McClure
    Things I encourage: Frequent local commits This way you don't have to be bothered by changes others are making to the central repository while working on a handful of related tasks.  It's a good idea to try to work on one task at a time and commit all changes at partitioned stopping points.  A local commit doesn't have to build, just FYI, so a stopping point doesn't mean a build point nor a point that you can push centrally.  There should be several of these in any given day.  2 hours is a good indicator that you might not be leveraging the power of frequent local commits.  Once you have verified a set of changes works, save them away, otherwise run the risk of introducing bugs into it when working on the next task.  The notion of a task By task I mean a related set of changes that can be completed in a few hours or less.  In the same token don’t make your tasks so small that critically related changes aren’t grouped together.  Use your intuition and the rest of these principles and I think you will find what is comfortable for you. Partial commits Sometimes one task explodes or unknowingly encompasses other tasks, at this point, try to get to a stopping point on part of the work you are doing and commit it so you can get that out of the way to focus on the remainder.  This will often entail committing part of the work and continuing on the rest. Outstanding changes as a guide If you don't commit often it might mean you are not leveraging your version control history to help guide your work.  It's a great way to see what has changed and might be causing problems.  The longer you wait, the more that has changed and the harder it is to test/debug what your changes are doing! This is a reason why I am so picky about my VCS tools on the client side and why I talk a lot about the quality of a diff tool and the ability to integrate that with a simple view of everything that has changed.  This is why I love using TortoiseHg and SmartGit: they show changed files, a diff (or two way diff with SmartGit) of the current selected file and a commit message all in one window that I keep maximized on one monitor at all times. Throw away / stash commits There is extreme value in being able to throw away a commit (or stash it) that is getting out of hand.  If you do not commit often you will have to isolate the work you want to commit from the work you want to throw away, which is wasted productivity and highly prone to errors.  I find myself doing this about once a week, especially when doing exploratory re-factoring.  It's much easier if I can just revert all outstanding changes. Sync with the central repository daily The rest of us depend on your changes.  Don't let them sit on your computer longer than they have to.  Waiting increases the chances of merge conflict which just decreases productivity.  It also prohibits us from doing deploys when people say they are done but have not merged centrally.  This should be done daily!  Find a way to partition the work you are doing so that you can sync at least once daily. Things I discourage: Lots of partial commits right at the end of a series of changes If you notice lots of partial commits at the end of a set of changes, it's likely because you weren't frequently committing, nor were you watching for the size of the task expanding beyond a single commit.  Chances are this cost you productivity if you use your outstanding changes as a guide, since you would have an ever growing list of changes. Committing single files Committing single files means you waited too long and no longer understand all the changes involved.  It may mean there were overlapping changes in single files that cannot be isolated.  In either case, go back to the suggestions above to avoid this.  Committing frequently does not mean committing frequently right at the end of a day's work. It should be spaced out over the course of several tasks, not all at the end in a 5 minute window.

    Read the article

  • Heading out to Dallas GiveCamp 2011

    - by dotgeek
    The day has finally arrived for twelve local charities here in the Dallas area, when they’ll get some help from various local Developers with their website initiative needs at this years Dallas GiveCamp. I’m really looking forward to helping out at this year event and what I hope will be the start of many more GiveCamps to follow. Similar to Habitat for Humanity, where people gather to help build and improve homes for people in need, GiveCamp brings together programmers and equips them with the virtual tools they need to build and improve their existing websites. Tonight is when things will kickoff for this weekends events and teams will start working on their various projects. The building continues on through the night then and all the way through until Sunday afternoon. The end goal for the teams and charities is to have a completed and working website for each charity to begin using and turn over all the production code and digital assets to them. None of this would be possible with out the great sponsors we have returning once again and their donations of various products to help these charities out with their projects, like Telerik's CMS product Sitefinity 4.0, paired with a year of hosting from Verio to mention just a few of them. Just like the skilled builders who might help train volunteers in the use of a nail gun in building a house. Training is also available here on site for the Developers and these local Charities. Giving them all the skills in how to manage and use these products, from site development and then into actual production is a key to the success of this weekends event.     Tonight's training sessions will kick off with a real treat from Giovanni Gallucci, as he speaks about Social Media for NPOs and then later Gabe Sumner from Telerik will begin a training session on Sitefinity for Developers. These training sessions will continue through out the weekend with .Net Nuke and Mojo Portal sessions also planned as well. If you’re a developer and would like to help out in the future, then check in your area and with your local User Groups to find out if you already have a GiveCamp near you to help out. If you don’t have one available, then consider starting up a local GiveCamp and then you too can help Code it Forward. About GiveCamp GiveCamp is a weekend-long event where software developers, designers, and database administrators donate their time to create custom software for non-profit organizations. This custom software could be a new website for the nonprofit organization, a small data-collection application to keep track of members, or a application for the Red Cross that automatically emails a blood donor three months after they’ve donated blood to remind them that they are now eligible to donate again. The only limitation is that the project should be scoped to be able to be completed in a weekend. During GiveCamp, developers are welcome to go home in the evenings or camp out all weekend long. There are usually food and drink provided at the event. There are sometimes even game systems set up for when you and your need a little break! Overall, it’s a great opportunity for people to work together, developing new friendships, and doing something important for their community. At GiveCamp, there is an expectation of “What Happens at GiveCamp, Stays at GiveCamp”. Therefore, all source code must be turned over to the charities at the end of the weekend (developers cannot ask for payment) and the charities are responsible for maintaining the code moving forward (charities cannot expect the developers to maintain the codebase).

    Read the article

  • Overriding the Pager rendering in Orchard

    - by Bertrand Le Roy
    The Pager shape that is used in Orchard to render pagination is one of those shapes that are built in code rather than in a Razor template. This can make it a little more confusing to override, but nothing is impossible. If we look at the Pager method in CoreShapes, here is what we see: [Shape] public IHtmlString Pager(dynamic Shape, dynamic Display) { Shape.Metadata.Alternates.Clear(); Shape.Metadata.Type = "Pager_Links"; return Display(Shape); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The Shape attribute signals a shape method. All it does is remove all alternates that may exist and replace the type of the shape with “Pager_Links”. In turn, this shape method is rather large and complicated, but it renders as a set of smaller shapes: a List with a “pager” class, and under that Pager_First, Pager_Previous, Pager_Gap, for each page a Pager_Link or a Pager_Current, then Pager_Gap, Pager_Next and Pager_Last. Each of these shapes can be displayed or not depending on the properties of the pager. Each can also be overridden with a Razor template. This can be done by dropping a file into the Views folder of your theme. For example, if you want the current page to appear between square braces, you could drop this Pager-CurrentPage.cshtml into your views folder: <span>[@Model.Value]</span> This overrides the original shape method, which was this: [Shape] public IHtmlString Pager_CurrentPage(HtmlHelper Html, dynamic Display, object Value) { var tagBuilder = new TagBuilder("span"); tagBuilder.InnerHtml = Html.Encode(Value is string ? (string)Value : Display(Value)); return MvcHtmlString.Create(tagBuilder.ToString()); } And here is what it would look like: Now what if we want to completely hide the pager if there is only one page? Well, the easiest way to do that is to override the Pager shape by dropping the following into the Views folder of your theme: @{ if (Model.TotalItemCount > Model.PageSize) { Model.Metadata.Alternates.Clear(); Model.Metadata.Type = "Pager_Links"; @Display(Model) } } And that’s it. The code in this template just adds a check for the number of items to display (in a template, Model is the shape) and only displays the Pager_Links shape if it knows that there’s going to be more than one page.

    Read the article

  • Writing an unthemed view while still using Orchard shapes and helpers

    - by Bertrand Le Roy
    This quick tip will show how you can write a custom view for a custom controller action in Orchard that does not use the current theme, but that still retains the ability to use shapes, as well as zones, Script and Style helpers. The controller action, first, needs to opt out of theming: [Themed(false)] public ActionResult Index() {} .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Then, we still want to use a shape as the view model, because Clay is so awesome: private readonly dynamic _shapeFactory; public MyController(IShapeFactory shapeFactory) { _shapeFactory = shapeFactory; } [Themed(false)] public ActionResult Index() { return View(_shapeFactory.MyShapeName( Foo: 42, Bar: "baz" )); } As you can see, we injected a shape factory, and that enables us to build our shape from our action and inject that into the view as the model. Finally, in the view (that would in Views/MyController/Index.cshtml here), just use helpers as usual. The only gotcha is that you need to use “Layout” in order to declare zones, and that two of those zones, Head and Tail, are mandatory for the top and bottom scripts and stylesheets to be injected properly. Names are important here. @{ Style.Include("somestylesheet.css"); Script.Require("jQuery"); Script.Include("somescript.js"); using(Script.Foot()) { <script type="text/javascript"> $(function () { // Do stuff }) </script> } } <!DOCTYPE html> <html> <head> <title>My unthemed page</title> @Display(Layout.Head) </head> <body> <h1>My unthemed page</h1> <div>@Model.Foo is the answer.</div> </body> @Display(Layout.Tail) </html> Note that if you define your own zones using @Display(Layout.SomeZone) in your view, you can perfectly well send additional shapes to them from your controller action, if you injected an instance of IWorkContextAccessor: _workContextAccessor.GetContext().Layout .SomeZone.Add(_shapeFactory.SomeOtherShape()); Of course, you’ll need to write a SomeOtherShape.cshtml template for that shape but I think this is pretty neat.

    Read the article

  • How to prepare for a programming competition? Graphs, Stacks, Trees, oh my! [closed]

    - by Simucal
    Last semester I attended ACM's (Association for Computing Machinery) bi-annual programming competition at a local University. My University sent 2 teams of 3 people and we competed amongst other schools in the mid-west. We got our butts kicked. You are given a packet with about 11 problems (1 problem per page) and you have 4 hours to solve as many as you can. They'll run your program you submit against a set of data and your output must match theirs exactly. In fact, the judging is automated for the most part. In any case.. I went there fairly confident in my programming skills and I left there feeling drained and weak. It was a terribly humbling experience. In 4 hours my team of 3 people completed only one of the problems. The top team completed 4 of them and took 1st place. The problems they asked were like no problems I have ever had to answer before. I later learned that in order to solve them some of them effectively you have to use graphs/graph algorithms, trees, stacks. Some of them were simply "greedy" algo's. My question is, how can I better prepare for this semesters programming competition so I don't leave there feeling like a complete moron? What tips do you have for me to be able to answer these problems that involve graphs, trees, various "well known" algorithms? How can I easily identify the algorithm we should implement for a given problem? I have yet to take Algorithm Design in school so I just feel a little out of my element. Here are some examples of the questions asked at the competitions: ACM Problem Sets Update: Just wanted to update this since the latest competition is over. My team placed 1st for our small region (about 6-7 universities with between 1-5 teams each school) and ~15th for the midwest! So, it is a marked improvement over last years performance for sure. We also had no graduate students on our team and after reviewing the rules we found out that many teams had several! So, that would be a pretty big advantage in my own opinion. Problems this semester ranged from about 1-2 "easy" problems (ie bit manipulation, string manipulation) to hard (graph problems involving fairly complex math and network flow problems). We were able to solve 4 problems in our 5 hours. Just wanted to thank everyone for the resources they provided here, we used them for our weekly team practices and it definitely helped! Some quick tips that I have that aren't suggested below: When you are seated at your computer before the competition starts, quickly type out various data structures that you might need that you won't have access to in your languages libraries. I typed out a Graph data-structure complete with floyd-warshall and dijkstra's algorithm before the competition began. We ended up using it in our 2nd problem that we solved and this is the main reason why we solved this problem before anyone else in the midwest. We had it ready to go from the beginning. Similarly, type out the code to read in a file since this will be required for every problem. Save this answer "template" someplace so you can quickly copy/paste it to your IDE at the beginning of each problem. There are no rules on programming anything before the competition starts so get any boilerplate code out the way. We found it useful to have one person who is on permanent whiteboard duty. This is usually the person who is best at math and at working out solutions to get a head start on future problems you will be doing. One person is on permanent programming duty. Your fastest/most skilled "programmer" (most familiar with the language). This will save debugging time also. The last person has several roles between assessing the packet of problems for the next "easiest" problem, helping the person on the whiteboard work out solutions and helping the person programming work out bugs/issues. This person needs to be flexible and be able to switch between roles easily.

    Read the article

  • If not now, then when?

    - by Chris Gardner
    Originally posted on: http://geekswithblogs.net/freestylecoding/archive/2013/10/25/if-not-now-then-when.aspx The time has been flying by this year. It seems like only yesterday that I mentioned the gorillagator, a simple construct of confusion to try to draw attention to my message. In reality, that message was sent over a month ago. During that time, the hours slipped to days and days to weeks. Many exciting things have happened to myself; I'm sure many exciting things have happened to you. I'm also sure that many terrifying things have happened to children and their families. 62 children enter treatment at a Children's Miracle Network Hospital every minute. That's nearly 60,000 children since I sent the last email. To put that number in perspective, that is more than the population of Greenland. If we expand that to the past year, they have been nearly 550,000 children treated. That is almost the population of Huntsville, Decatur, and all their suburbs combined. Over the past 4 years, I have raised a little more than $3,000 for Children's Hospital of Alabama. As a result, I received a call from the organizers of Extra Life thanking me for my dedicated work and informing me that I was the top supporters for Children's Hospital of Alabama ... with my measly three grand. We can do much better than that. It may sound like I'm trying to have fun by playing games for 24 hours. It is more than that. It is me using my time and body as a catalyst. It is me putting my passion to work for a cause. It is me turning my love into something tangible. I have been campaigning and fighting to give these children a chance for years. I have been asking you to help me support these children and families. I've been putting in countless hours of talking to people, impassioned emails, and carefully constructed tweets. I have been fighting with cutting edge, and sometimes expensive, technology to try to provide live streams of my marathons. I yearly put my body through 24 (and, this year, 25) hours of no sleep. I do this to represent the countless hours these families sit awake at their children's side. All I ask is a few minutes on a website and a few dollars. These few minutes and few dollars go a long way help people that are experiencing circumstances that only occur in our nightmares. I also ask that you take one extra step. Forward this plea to those that you know. I can only reach a small fraction of a percentage of the people that may be able to help. Together, we can reach the world. I raise money for Children's Hospital of Alabama. As this message branches out, people may wish to support a hospital closer to their area. I have included a link to the list of people that have dedicated their time and have received no donations. Find someone on the list supporting your local hospital and give them a donation. Let them know that their time and effort are appreciated. Together, we can do something great. Together, we can make a difference. Together, we all stand tall. Thank you. You can get more information at http://www.extra-life.org and http://childrensmiraclenetworkhospitals.org/" My donation page is http://www.extra-life.org/participant/cgardner The list of participants without donations is http://www.extra-life.org/index.cfm?fuseaction=donorDrive.eventParticipantList&page=629&eventID=512

    Read the article

  • Sweet and Sour Source Control

    - by Tony Davis
    Most database developers don't use Source Control. A recent anonymous poll on SQL Server Central asked its readers "Which Version Control system do you currently use to store you database scripts?" The winner, with almost 30% of the vote was...none: "We don't use source control for database scripts". In second place with almost 28% of the vote was Microsoft's VSS. VSS? Given its reputation for being buggy, unstable and lacking most of the basic features required of a proper source control system, answering VSS is really just another way of saying "I don't use Source Control". At first glance, it's a surprising thought. You wonder how database developers can work in a team and find out what changed, when the system worked before but is now broken; to work out what happened to their changes that now seem to have vanished; to roll-back a mistake quickly so that the rest of the team have a functioning build; to find instantly whether a suspect change has been deployed to production. Unfortunately, the survey didn't ask about the scale of the database development, and correlate the two questions. If there is only one database developer within a schema, who has an automated approach to regular generation of build scripts, then the need for a formal source control system is questionable. After all, a database stores far more about its metadata than a traditional compiled application. However, what is meat for a small development is poison for a team-based development. Here, we need a form of Source Control that can reconcile simultaneous changes, store the history of changes, derive versions and builds and that can cope with forks and merges. The problem comes when one borrows a solution that was designed for conventional programming. A database is not thought of as a "file", but a vast, interdependent and intricate matrix of tables, indexes, constraints, triggers, enumerations, static data and so on, all subtly interconnected. It is an awkward fit. Subversion with its support for merges and forks, and the tolerance of different work practices, can be made to work well, if used carefully. It has a standards-based architecture that allows it to be used on all platforms such as Windows Mac, and Linux. In the words of Erland Sommerskog, developers should "just do it". What's in a database is akin to a "binary file", and the developer must work only from the file. You check out the file, edit it, and save it to disk to compile it. Dependencies are validated at this point and if you've broken anything (e.g. you renamed a column and broke all the objects that reference the column), you'll find out about it right away, and you'll be forced to fix it. Nevertheless, for many this is an alien way of working with SQL Server. Subversion is the powerhouse, not the GUI. It doesn't work seamlessly with your existing IDE, and that usually means SSMS. So the question then becomes more subtle. Would developers be less reluctant to use a fully-featured source (revision) control system for a team database development if they had a turn-key, reliable system that fitted in with their existing work-practices? I'd love to hear what you think. Cheers, Tony.

    Read the article

  • Educational, well-written FOSS projects to read, study or discuss

    - by Godot
    Before you say it: yes, this "question" has been asked other times. However, I could not fine many of such questions and not that easily, and those I found had similar results. What I'm trying to say that there are no comprehensive lists of well written Open Source projects, so I decided to set some requirements for the entries (one or possibly more): Idiomatic use of the language in which they are written The project should be lightweight. Not as in "a few kbs", as in "clean" and possibly following the UNIX philosophy, making an efficient use of resources and performing its duty and nothing more. No code bloat, most importantly. Projects like Firefox and GNOME wouldn't qualify, for example. Minimal reliance on external, non-standard libraries, with exceptions for some common FOSS libraries (curses, Xlib, OpenGL and possibly "usual suspects" like gtk+, webkit and Boost). Reliance on well-written libraries is welcome. No reliance on proprietary software - for obvious reasons (programs that rely on XNA, DirectX, Cocoa and similar, for example). Well-documented code is welcome. Include link to web interfaces to their repositories if possible. Here are some sample projects that often pop up in these threads: Operating Systems Plan 9 from Bell Labs: More or less, the official "sequel" to UNIX. Written in C by the same people who invented C! NetBSD: The most portable BSD implementation, written in C and also a good example of portable and organized code. Network and Databases Sqlite: Extremely lightweight and extremely efficient, one of the best pieces of C software I've seen. Count the lines yourself! Lighttpd: A small but pretty reliable web server written in C. Programming languages and VMs Lua: extremely lightweight multi-paradigm programming language. Written in C. Tiny C Compiler: Really tiny C compiler. Not really comparable to GCC or Clang but does its job. PyPy: A Python implementation written in Python. Pharo: OK, I admit it, I'm not really a Smalltalk expert but Pharo is a fork of Squeak and looked rather interesting. Stackless Python - An implementation of Python that doesn't rely on the C call stack - written in C (with some parts in Python) Games and 3D: Angband: One of the most accessible roguelike codebases around here, written in C. Ogre3D: Cross-platform 3D engine. Gets bloated if you don't skip the platform-specific implementation code, otherwise is a pretty solid example of good C++ OO. Simon Tatham's Portable Puzzle Collection: Title says it all. Other - dwm: Lightweight window manager. Written in C. Emulation and Reverse Engineering - Bochs: x86 emulator, written in C++ and tiny enough. - MAME: If you want to see C at one of its lowest levels, MAME is for you. May not be as clean as the other projects but it can teach you A LOT. Before you ask: I didn't mention Linux because it has become quite bloated in the last few years, Linus has also confirmed it. Nonetheless, it'd be a great educational read the same, even if for other reasons. Same for GCC. Feel free to edit or wikify my post. I hope you won't lock my question, I'm only trying to organize a little community effort for the good of all those people who want to enhance their coding skills.

    Read the article

  • How to resize / enlarge / grow a non-LVM ext4 partition

    - by Mischa
    I have already searched the forums, but couldnt find a good suitable answer: I have an Ubuntu Server 10.04 as KVM Host and a guest system, that also runs 10.04. The host system uses LVM and there are three logical volumes, which are provided to the guest as virtual block devices - one for /, one for /home and one for swap. The guest had been partitioned without LVM. I have already enlarged the logical volume in the host system - the guest successfully sees the bigger virtual disk. However, this virtual disk contains one "good old" partition, which still has the old small size. The output of fdisk -l is me@produktion:/$ LC_ALL=en_US sudo fdisk -l Disk /dev/vda: 32.2 GB, 32212254720 bytes 255 heads, 63 sectors/track, 3916 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000c8ce7 Device Boot Start End Blocks Id System /dev/vda1 * 1 3917 31455232 83 Linux Disk /dev/vdb: 2147 MB, 2147483648 bytes 244 heads, 47 sectors/track, 365 cylinders Units = cylinders of 11468 * 512 = 5871616 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000f2bf7 Device Boot Start End Blocks Id System /dev/vdb1 1 366 2095104 82 Linux swap / Solaris Partition 1 has different physical/logical beginnings (non-Linux?): phys=(0, 32, 33) logical=(0, 43, 28) Partition 1 has different physical/logical endings: phys=(260, 243, 47) logical=(365, 136, 44) Disk /dev/vdc: 225.5 GB, 225485783040 bytes 255 heads, 63 sectors/track, 27413 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00027f25 Device Boot Start End Blocks Id System /dev/vdc1 1 9138 73398272 83 Linux The output of parted print all is Model: Virtio Block Device (virtblk) Disk /dev/vda: 32.2GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 32.2GB 32.2GB primary ext4 boot Model: Virtio Block Device (virtblk) Disk /dev/vdb: 2147MB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 2146MB 2145MB primary linux-swap(v1) Model: Virtio Block Device (virtblk) Disk /dev/vdc: 225GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 75.2GB 75.2GB primary ext4 What I want to achieve is to simply grow or resize the partition /dev/vdc1 so that it uses the whole space provided by the virtual block device /dev/vdc. The problem is, that when I try to do that with parted, it complains: (parted) select /dev/vdc Using /dev/vdc (parted) print Model: Virtio Block Device (virtblk) Disk /dev/vdc: 225GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 75.2GB 75.2GB primary ext4 (parted) resize 1 WARNING: you are attempting to use parted to operate on (resize) a file system. parted's file system manipulation code is not as robust as what you'll find in dedicated, file-system-specific packages like e2fsprogs. We recommend you use parted only to manipulate partition tables, whenever possible. Support for performing most operations on most types of file systems will be removed in an upcoming release. Start? [1049kB]? End? [75.2GB]? 224GB Error: File system has an incompatible feature enabled. Compatible features are has_journal, dir_index, filetype, sparse_super and large_file. Use tune2fs or debugfs to remove features. So what can I do? This is a headless production system. What is a safe way to grow this partition? I CAN unmount it, though - so this is not the problem.

    Read the article

  • questions about dual-boot install Ubuntu 10.04 and Windows 7 on same hard drive

    - by Tim
    I'd like to dual-boot install Ubuntu 10.04 on the same hard drive as Windows 7 which has already been installed. As to sources on the internet: I found a website iinet about dual-boot installation of Ubuntu 10.10 and Windows 7 on the same hard drive, which I think more specific than the one on Ubuntu Community without specific version of the OSes. Since I am installing Ubuntu 10.04 instead of 10.10, my question is whether their installers are same or almost same and if I can follow iinet for my dual-boot installation? Or are there better websites for information about dual-boot installtion of Ubuntu 10.04 and Windows 7? As to shrinking Windows partitions to make free space for Ubuntu partitions: iinet uses the partition software in Ubuntu's installer to shrink the Windows partition. But I saw in many website that the partition software in Ubuntu's installer cannot guarantee shrinking Windows 7 partitions successfully, so they recommended in general to shrink Windows partitions under Windows itself using its softwares. For example, in Ubuntu Community, it says: Some people think that the Windows partition must be resized only from within Windows Vista and Windows 7 using the shrink/resize option. ... If you use GParted Partition Editor in the Ubuntu Live CD be careful. So I was wondering which way to go in my situation? As to partition for bootloader files: In iinet, I don't see there is a partition created and dedicated to boot files (i.e. Grub files). However, I saw in many websites strongly suggesting using a boot partition for Grub files, especially for the purpose of separation and protection from installed OS files. I was wondering which way I should choose and why? As to installing bootloader Grub, in iinet, I see that to install Grub it only needs to specify the hard drive device for bootloader installation. However, in ubuntuguide(for more than 2 OSes and Ubuntu 9.04), some commands are needed to run in order to put Grub configuration files in MBR, and OS partition, for the chain-load process (where to find the files for the next stage). In Ubuntu Community, there are some related sentences which I don't quite understand how to do in practice: the only thing in your computer outside of Ubuntu that needs to be changed is a small code in the MBR (Master Boot Record) of the first hard disk. The MBR code is changed to point to the boot loader in Ubuntu. If you have a problem with changing the MBR code, you might prefer to just install the code for pointing to GRUB to the first sector of your Ubuntu partition instead. If you do that during the Ubuntu installation process, then Ubuntu won't boot until you configure some other boot manager to point to Ubuntu's boot sector. Windows Vista no longer utilizes boot.ini, ntdetect.com, and ntldr when booting. Instead, Vista stores all data for its new boot manager in a boot folder. Windows Vista ships with an command line utility called bcdedit.exe, which requires administrator credentials to use. You may want to read http://go.microsoft.com/fwlink/?LinkId=112156 about it. Using a command line utility always has its learning curve, so a more productive and better job can be done with a free utility called EasyBCD, developed and mastered in during the times of Vista Beta already. EasyBCD is user friendly and many Vista users highly recommend EasyBCD. In what is quoted above, I was wondering how exactly I should change the MBR code to point to the bootloader in Ubuntu? if I fail to change MBR code, are the other suggested boot managers being bcdedit.exe and EasyBCD in Windows? With the three sources above, which one shall I follow? Thanks and regards

    Read the article

  • WPF: Running code when Window rendering is completed

    - by Ilya Verbitskiy
    WPF is full of surprises. It makes complicated tasks easier, but at the same time overcomplicates easy  task as well. A good example of such overcomplicated things is how to run code when you’re sure that window rendering is completed. Window Loaded event does not always work, because controls might be still rendered. I had this issue working with Infragistics XamDockManager. It continued rendering widgets even when the Window Loaded event had been raised. Unfortunately there is not any “official” solution for this problem. But there is a trick. You can execute your code asynchronously using Dispatcher class.   Dispatcher.BeginInvoke(new Action(() => Trace.WriteLine("DONE!", "Rendering")), DispatcherPriority.ContextIdle, null);   This code should be added to your Window Loaded event handler. It is executed when all controls inside your window are rendered. I created a small application to prove this idea. The application has one window with a few buttons. Each button logs when it has changed its actual size. It also logs when Window Loaded event is raised, and, finally, when rendering is completed. Window’s layout is straightforward.   1: <Window x:Class="OnRendered.MainWindow" 2: xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" 3: xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" 4: Title="Run the code when window rendering is completed." Height="350" Width="525" 5: Loaded="OnWindowLoaded"> 6: <Window.Resources> 7: <Style TargetType="{x:Type Button}"> 8: <Setter Property="Padding" Value="7" /> 9: <Setter Property="Margin" Value="5" /> 10: <Setter Property="HorizontalAlignment" Value="Center" /> 11: <Setter Property="VerticalAlignment" Value="Center" /> 12: </Style> 13: </Window.Resources> 14: <StackPanel> 15: <Button x:Name="Button1" Content="Button 1" SizeChanged="OnSizeChanged" /> 16: <Button x:Name="Button2" Content="Button 2" SizeChanged="OnSizeChanged" /> 17: <Button x:Name="Button3" Content="Button 3" SizeChanged="OnSizeChanged" /> 18: <Button x:Name="Button4" Content="Button 4" SizeChanged="OnSizeChanged" /> 19: <Button x:Name="Button5" Content="Button 5" SizeChanged="OnSizeChanged" /> 20: </StackPanel> 21: </Window>   SizeChanged event handler simply traces that the event has happened.   1: private void OnSizeChanged(object sender, SizeChangedEventArgs e) 2: { 3: Button button = (Button)sender; 4: Trace.WriteLine("Size has been changed", button.Name); 5: }   Window Loaded event handler is slightly more interesting. First it scheduler the code to be executed using Dispatcher class, and then logs the event.   1: private void OnWindowLoaded(object sender, RoutedEventArgs e) 2: { 3: Dispatcher.BeginInvoke(new Action(() => Trace.WriteLine("DONE!", "Rendering")), DispatcherPriority.ContextIdle, null); 4: Trace.WriteLine("Loaded", "Window"); 5: }   As the result I had seen these trace messages.   1: Button5: Size has been changed 2: Button4: Size has been changed 3: Button3: Size has been changed 4: Button2: Size has been changed 5: Button1: Size has been changed 6: Window: Loaded 7: Rendering: DONE!   You can find the solution in GitHub.

    Read the article

  • Antenna Aligner Part 7: Connecting the dots

    - by Chris George
    The app is basically ready, so I eagerly started to sort out creating the application entry in iTunes Connect. It's mostly intuitive actually, although I did have to create yet another icon for iTunes sized 512x512 pixels, damn lucky I did the original graphics as vector! It took me longer to write the application description than anything else, I'm so not a tech author! I didn't like the way you have to 'make up' an SKU (Stock Keeping Unit) number. I have to do some googling to find out that it really doesn't matter what it is! It should be more obvious what to do from the actual website itself. That aside, the rest of it was actually fairly straightforward. As well as the details of the application, iPhone and iPad screenshots were also required. This posed somewhat of a problem. The iPhone ones were easy (as I have one!), but I do not (yet) own an iPad . So I thought I'd leave the iPad screenshots out for now. Once the application details were sorted, I moved onto the rights and pricing. At the start of the project I had made the decision that I wouldn't charge any more than the lowest amount £0.59. I believe there is a market for this, but as my first foray into app development I didn't want to take the mick. I did realise, however, that I had built my app with a developer certificate and provisioning profile. This was fairly quickly corrected, and again Nomad made this very easy to switch over to the distribution certificate and provisioning profile. With a sense of excitement I cracked open iTunes connect and clicked the upload button ... ...slight snag... . when the Nomad project was started, Apple allowed uploads of these binaries via iTunes Connect. But this is no longer possible, the only upload path is via the Application Loader available from the Apple Developer program. This itself has one limitation, it only runs on a mac! D'OH!!!  Actually my language was somewhat more colourful when this fact came to light. After picking my laptop up off the floor and putting it back together... ok only joking, but I did nearly throw it out of frustration!... I started to consider the options; I briefly entertained the idea of buying a cheap mac from ebay... no, that defeats the whole object of what I'm doing, plus my wife wouldn't be impressed there are some guys out there in the interweb who will upload your app for a small fee...but I don't really like the idea of giving some faceless email address my apple developer login details, as well as my app binary! find some willing friend with a mac who would kindly let me use it... obviously this is the only sensible option. In the meantime, I informed the Nomad team about this slight 'issue' and they are currently investigating possible solutions...

    Read the article

  • Planning development when academic research is involved

    - by Another Anonymous User
    Dear fellow programmers, how do you do "software planning" when academic research is involved? And, on a side note, how do you convince your boss that writing software is not like building a house and it's more like writing a novel? The gory details are below. I am in charge of a small dev team working in a research lab. We started developing a software with the purpose of going public one day (i.e. sell and make money off that). Such software depends on, amongst other things, at least two independent research lines: that is, there are at least two Ph.D. candidates that will, hopefully, one day come out with a working implementation of what we need. The main software depends also on other, more concrete resources that we as developers can take care of: graphics rendering, soft bodies deformation, etc. My boss asked me to write the specifications, requirements AND a bloody GANTT chart of the entire project. Faced with the fact that I don't have a clue about the research part, and that such research is fundamental for the software, he said "make assumptions." For the clarity of the argument, he is a professor whose Ph.D. students should come up with the research we need. And he comes from a strictly engineering background: plan everything first, write down specifications and only then write down code that "it's the last part". What I am doing now: I broke down the product in features; each 'feature' is, de facto, a separate product; Each feature is built on top of the previous one; Once a feature (A) has a working prototype the team can start working on the next feature (B), while QA for is being done for A (if money allows, more people can be brought in, etc.); Features that depend on research will come last: by then, hopefully, the research part will be completed (when is still a big question) ; Also, I set the team to use SCRUM for the development of 'version 1.0', due in a few months. This deadline could be set based on reasonable assumptions: we listed all required features, we counted our availability, and we gave a reasonable estimate. So my questions, again, are: How do I make my boss happy while at the same time get something out the door? How do I write specifications for something we -the developers- have no clue whether it's possible to do or not? (We still haven't decided which libraries to use for some tasks; we'll do so when we'll need to) How do I get the requirements for that, given that there are yet no clients nor investors, just lots of interests and promises? How do I get peace in the world? I am sure at least one of my questions will be answered :) ps: I am writing this anonymously since a potential investor might backfire if this is discovered. Hope you'll understand. However I must say I do not like this mentality of 'hiding the truth': this program will likely benefit many, and not being able to talk openly about this (with my name and my reputation attached) feels like censorship. But alas, I care more about your suggestions now.

    Read the article

  • How to use DI and DI containers

    - by Pinetree
    I am building a small PHP mvc framework (yes, yet another one), mostly for learning purposes, and I am trying to do it the right way, so I'd like to use a DI container, but I am not asking which one to use but rather how to use one. Without going into too much detail, the mvc is divided into modules which have controllers which render views for actions. This is how a request is processed: a Main object instantiates a Request object, and a Router, and injects the Request into the Router to figure out which module was called. then it instantiates the Module object and sends the Request to that the Module creates a ModuleRouter and sends the Request to figure out the controller and action it then creates the Controller and the ViewRenderer, and injects the ViewRenderer into the Controller (so that the controller can send data to the view) the ViewRenderer needs to know which module, controller and action were called to figure out the path to the view scripts, so the Module has to figure out this and inject it to the ViewRenderer the Module then calls the action method on the controller and calls the render method on the ViewRenderer For now, I do not have any DI container set up, but what I do have are a bunch of initX() methods that create the required component if it is not already there. For instance, the Module has the initViewRenderer() method. These init methods get called right before that component is needed, not before, and if the component was already set it will not initialize it. This allows for the components to be switched, but it does not require manually setting them if they are not there. Now, I'd like to do this by implementing a DI container, but still keep the manual configuration to a bare minimum, so if the directory structure and naming convention is followed, everything should work, without even touching the config. If I use the DI container, do I then inject it into everything (the container would inject itself when creating a component), so that other components can use it? When do I register components with the DI? Can a component register other components with the DI during run-time? Do I create a 'common' config and use that? How do I then figure out on the fly which components I need and how they need to be set up? If Main uses Router which uses Request, Main then needs to use the container to get Module (or does the module need to be found and set beforehand? How?) Module uses Router but needs to figure out the settings for the ViewRenderer and the Controller on the fly, not in advance, so my DI container can't be setting those on the Module before the module figures out the controller and action... What if the controller needs some other service? Do I inject the container into every controller? If I start doing that, I might just inject it into everything... Basically I am looking for the best practices when dealing with stuff like this. I know what DI is and what DI containers do, but I am looking for guidance to using them in real life, and not some isolated examples on the net. Sorry for the lengthy post and many thanks in advance.

    Read the article

  • Apprentice Boot Camp in South Africa (Part 2)

    - by Tim Koekkoek
    By Maximilian Michel (DE), Jorge Garnacho (ES), Daniel Maull (UK), Adam Griffiths (UK), Guillermo De Las Nieves (ES), Catriona McGill (UK), Ed Dunlop (UK) Today we have the second part of the adventures of seven apprentices from all over Europe in South-Africa!  Kruger National Park & other experiences Going to the Kruger National Park was definitely an experience we will all remember for the rest of our lives. This trip,organised by Patrick Fitzgerald, owner of the Travellers Nest (where we all stayed), took us from the hustle and bustle of Joburg to experience what Africa is all about, the wild! Although the first week’s training we had prior to this trip to the Kruger was going very well, we all knew this was to be a very nice break before we started the second week of training. And we were right, the animals, scenery and sights we saw were just simply incredible and like I said something we will remember for the rest of our lives. To see lions, elephants, cheetahs and rhinos and many more in a zoo is one thing, but to see them in the wild, in their natural habitat is very special and I personally only realised this from the early 5 am start on the first morning in the Kruger, which was definitely worth it. Not only was it all about the safari, we ate some wonderful food, in particular on the Saturday night, Patrick made us a traditional South African Braai which was one of my favourite meals of the whole two weeks. After the Kruger National Park we had a whole day of traveling back to Johannesburg but even this was made to be a good day by our hosts. Despite the early start on the road it was all worth it by the time we reached God's Window. The walk to the top was made a lot harder by all the steaks we had eaten in the first week but the hard walk was worth it at the top, with views that stretched for miles. The Food The food in South Africa is typically meat and in big amounts, while there we ate a lot of big beef steaks, ribs and kudu sausage. All of the meat we ate was usually cooked with a sauce such as a Barbeque glaze. The restaurants we visited were: Upperdeck Restaurant, with live music and a great terrace to eat, the atmosphere was good for enjoying the music and eating our food. Most of us ate  Spare ribs that weighed 600 kg, with barbecue sauce that was delicious. Die Bosvelder Pub & Restaurant is a restaurant with a very surprising decor, this is because the walls had many of south Africa’s famous animals on them. The food was maybe the best we ate in South Africa. Our orders were: Springbokvlakte Lambs' Neck Stew, beef in gravy and steaks topped with cheese and then more meat on top! All meals were accompanied by a selection of white sauce cauliflower, spinach and zanhorias. Pepper Chair Restaurant, where the specialty is T-Bone steaks of 1.4 kg, but most of us were happy to attempt the 1 kg. Cooked with barbecue sauce over the meat, it was very good!  The only problem was their size causing the  the meat to get cold if you did not eat it very fast! We’re all waiting for our 1.0 kg t-bone steak including our Senior Director EMEA Systems Support Germany & Switzerland: Werner Hoellrigl The Godfather Restaurant, the food here was more meat in abundance. We ate: great ribs, hamburgers, steaks and all accompanied with a small plates of carrot and sauteed spinach, very good. We had two great weeks in South-Africa! If you want to join Oracle, then check http://campus.oracle.com 

    Read the article

  • Simple OpenGL program major slow down at high resolution

    - by Grieverheart
    I have created a small OpenGL 3.3 (Core) program using freeglut. The whole geometry is two boxes and one plane with some textures. I can move around like in an FPS and that's it. The problem is I face a big slow down of fps when I make my window large (i.e. above 1920x1080). I have monitors GPU usage when in full-screen and it shows GPU load of nearly 100% and Memory Controller load of ~85%. When at 600x600, these numbers are at about 45%, my CPU is also at full load. I use deferred rendering at the moment but even when forward rendering, the slow down was nearly as severe. I can't imagine my GPU is not powerful enough for something this simple when I play many games at 1080p (I have a GeForce GT 120M btw). Below are my shaders, First Pass #VS #version 330 core uniform mat4 ModelViewMatrix; uniform mat3 NormalMatrix; uniform mat4 MVPMatrix; uniform float scale; layout(location = 0) in vec3 in_Position; layout(location = 1) in vec3 in_Normal; layout(location = 2) in vec2 in_TexCoord; smooth out vec3 pass_Normal; smooth out vec3 pass_Position; smooth out vec2 TexCoord; void main(void){ pass_Position = (ModelViewMatrix * vec4(scale * in_Position, 1.0)).xyz; pass_Normal = NormalMatrix * in_Normal; TexCoord = in_TexCoord; gl_Position = MVPMatrix * vec4(scale * in_Position, 1.0); } #FS #version 330 core uniform sampler2D inSampler; smooth in vec3 pass_Normal; smooth in vec3 pass_Position; smooth in vec2 TexCoord; layout(location = 0) out vec3 outPosition; layout(location = 1) out vec3 outDiffuse; layout(location = 2) out vec3 outNormal; void main(void){ outPosition = pass_Position; outDiffuse = texture(inSampler, TexCoord).xyz; outNormal = pass_Normal; } Second Pass #VS #version 330 core uniform float scale; layout(location = 0) in vec3 in_Position; void main(void){ gl_Position = mat4(1.0) * vec4(scale * in_Position, 1.0); } #FS #version 330 core struct Light{ vec3 direction; }; uniform ivec2 ScreenSize; uniform Light light; uniform sampler2D PositionMap; uniform sampler2D ColorMap; uniform sampler2D NormalMap; out vec4 out_Color; vec2 CalcTexCoord(void){ return gl_FragCoord.xy / ScreenSize; } vec4 CalcLight(vec3 position, vec3 normal){ vec4 DiffuseColor = vec4(0.0); vec4 SpecularColor = vec4(0.0); vec3 light_Direction = -normalize(light.direction); float diffuse = max(0.0, dot(normal, light_Direction)); if(diffuse 0.0){ DiffuseColor = diffuse * vec4(1.0); vec3 camera_Direction = normalize(-position); vec3 half_vector = normalize(camera_Direction + light_Direction); float specular = max(0.0, dot(normal, half_vector)); float fspecular = pow(specular, 128.0); SpecularColor = fspecular * vec4(1.0); } return DiffuseColor + SpecularColor + vec4(0.1); } void main(void){ vec2 TexCoord = CalcTexCoord(); vec3 Position = texture(PositionMap, TexCoord).xyz; vec3 Color = texture(ColorMap, TexCoord).xyz; vec3 Normal = normalize(texture(NormalMap, TexCoord).xyz); out_Color = vec4(Color, 1.0) * CalcLight(Position, Normal); } Is it normal for the GPU to be used that much under the described circumstances? Is it due to poor performance of freeglut? I understand that the problem could be specific to my code, but I can't paste the whole code here, if you need more info, please tell me.

    Read the article

  • Azure Web Sites FTP credentials

    - by Bertrand Le Roy
    A quick tip for all you new enthusiastic users of the amazing new Azure. I struggled for a few minutes finding this, so I thought I’d share. The Azure dashboard doesn’t seem to give easy access to your FTP credentials, and they are not the login and password you use everywhere else. What Azure does give you though is a Publish Profile that you can download: This is a plain XML file that should look something like this: <publishData> <publishProfile profileName="nameofyoursite - Web Deploy" publishMethod="MSDeploy" publishUrl="waws-prod-blu-001.publish.azurewebsites.windows.net:443" msdeploySite="nameofyoursite" userName="$NameOfYourSite" userPWD="sOmeCrYPTicL00kIngStr1nG" destinationAppUrl="http://nameofyoursite.azurewebsites.net" SQLServerDBConnectionString="" mySQLDBConnectionString="" hostingProviderForumLink="" controlPanelLink="http://windows.azure.com"> <databases/> </publishProfile> <publishProfile profileName="nameofyoursite - FTP" publishMethod="FTP" publishUrl="ftp://waws-prod-blu-001.ftp.azurewebsites.windows.net/site/wwwroot" ftpPassiveMode="True" userName="nameofyoursite\$nameofyoursite" userPWD="sOmeCrYPTicL00kIngStr1nG" destinationAppUrl="http://nameofyoursite.azurewebsites.net" SQLServerDBConnectionString="" mySQLDBConnectionString="" hostingProviderForumLink="" controlPanelLink="http://windows.azure.com"> <databases/> </publishProfile> </publishData> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } I’ve highlighted the FTP server name, user name and password. This is what you need to use in Filezilla or whatever you use to access your site remotely. Notice how the password looks encrypted. Well, it’s not really encrypted in fact. This is your password in clear text. It’s just crypto-random gibberish, which is the best kind of password. UPDATE: About 2 minutes after I posted that, David Ebbo mentioned to me on Twitter that if you've configured publishing credentials (for Git typically) those will work too. Don't forget to include the full user name though, which should be of the form nameofthesite\username. The password is the one you defined. That’s it. Enjoy.

    Read the article

  • Handling "related" work within a single agile work item

    - by Tesserex
    I'm on a project team of 4 devs, myself included. We've been having a long discussion on how to handle extra work that comes up in the course of a single work item. This extra work is usually things that are slightly related to the task, but not always necessary to accomplish the goal of the item (that may be an opinion). Examples include but are not limited to: refactoring of the code changed by the work item refactoring code neighboring the code changed by the item re-architecting the larger code area around the ticket. For example if an item has you changing a single function, you realize the entire class now could be redone to better accommodate this change. improving the UI on a form you just modified When this extra work is small we don't mind. The problem is when this extra work causes a substantial extension of the item beyond the original feature point estimation. Sometimes a 5 point item will actually take 13 points of time. In one case we had a 13 point item that in retrospect could have been 80 points or more. There are two options going around in our discussion for how to handle this. We can accept the extra work in the same work item, and write it off as a mis-estimation. Arguments for this have included: We plan for "padding" at the end of the sprint to account for this sort of thing. Always leave the code in better shape than you found it. Don't check in half-assed work. If we leave refactoring for later, it's hard to schedule and may never get done. You are in the best mental "context" to handle this work now, since you're waist deep in the code already. Better to get it out of the way now and be more efficient than to lose that context when you come back later. We draw a line for the current work item, and say that the extra work goes into a separate ticket. Arguments include: Having a separate ticket allows for a new estimation, so we aren't lying to ourselves about how many points things really are, or having to admit that all of our estimations are terrible. The sprint "padding" is meant for unexpected technical challenges that are direct barriers to completing the ticket requirements. It is not intended for side items that are just "nice-to-haves". If you want to schedule refactoring, just put it at the top of the backlog. There is no way for us to properly account for this stuff in an estimation, since it seems somewhat arbitrary when it comes up. A code reviewer might say "those UI controls (which you actually didn't modify in this work item) are a bit confusing, can you fix that too?" which is like an hour, but they might say "Well if this control now inherits from the same base class as the others, why don't you move all of this (hundreds of lines of) code into the base and rewire all this stuff, the cascading changes, etc.?" And that takes a week. It "contaminates the crime scene" by adding unrelated work into the ticket, making our original feature point estimates meaningless. In some cases, the extra work postpones a check-in, causing blocking between devs. Some of us are now saying that we should decide some cut off, like if the additional stuff is less than 2 FP, it goes in the same ticket, if it's more, make it a new ticket. Since we're only a few months into using Agile, what's the opinion of all the more seasoned Agile veterans around here on how to handle this?

    Read the article

  • Oracle Announces Release of PeopleSoft HCM 9.1 Feature Pack 2

    - by Jay Zuckert
    Big things sometimes come in small packages.  Today Oracle announced the availability of PeopleSoft HCM 9.1 Feature Pack 2 which delivers a new HR self service user experience that fundamentally changes the way managers and employees interact with the HCM system.  Earlier this year we reviewed a number of new concept designs with our Customer Advisory Boards.  With the accelerated feature pack development cycle we have adopted, these innovations are  now available to all 9.1 customers without the need for an upgrade.   There are no new products that need to be licensed for the capabilities below. For more details on Feature Pack 2, please see the Oracle press release. Included in Feature Pack 2 is a new search-based menu-free navigation that allows managers to search for employees by name and take actions directly from the secure search results.  For example, a manager can now simply type in part of an employee’s first or last name and receive meaningful results from documents related to performance, compensation, learning, recruiting, career planning and more.   Delivered actions can be initiated directly from these search results and the actions are securely tied to HCM security and user role.  The feature pack also includes new pages that will enable managers to be more productive by aggregating key employee data into a single page.  The new Manager Dashboard and Talent Summary provide a consolidated view of data related to a manager’s team and individual team members, respectively.   The Manager Dashboard displays information relevant to their direct reports including team learning, objective alignment, alerts, and pending approvals requiring their attention.  The Talent Summary provides managers with an aggregated view of talent management-related data for an individual employee including performance history, salary history, succession options, total rewards, and competencies.   The information displayed in both the Manager Dashboard and Talent Summary is configurable by system administrators and can be personalized by each of your managers. Other Feature Pack 2 enhancements allow organizations to administer Matrix or Dotted-Line Relationship Management, which addresses the challenge of tracking and maintaining project-based organizations that cut across the enterprise and geographic regions.  From within the Company Directory and Org Viewer organization charts, managers now have access to manager self-service transactions from related actions.  More than 70 manager and employee self-service transactions have been tied into the related action framework accessible from Org Viewer, Manager Dashboard, Talent Summary and Secure Enterprise Search (SES) results.  In addition to making it easier to access manager self-service transactions, the feature pack delivers streamlined transaction pages making everyday tasks such as promoting an employee faster and more efficient. With the delivery of PeopleSoft HCM 9.1 Feature Pack 2, Oracle continues to deliver on its commitment to our PeopleSoft customers.  With this feature pack, HCM 9.1 customers will be able to deploy the newest functionality quickly, without a major release upgrade, and realize added value from their existing PeopleSoft investment.    For customers newly deploying 9.1, a new download with all of Feature Pack 2  will be available early next year.   This will aslo include recertified upgrade paths from 8.8, 8.9 and 9.0, for customers in the upgrade process.

    Read the article

  • Elo system behaves oddly in program I've created

    - by adc
    Alright, so I'm looking to build a small program (C# and XAML) that, essentially, does this: Generate array of players. Each player has a current rating and a true rating. I set current rating to 1200 as a starting point right now; I've also tried setting it to true rating and the average of the two. True rating is what their skill level actually is. Their true rating is calculated based on percentages from the current League of Legends rating system; generating an array of 970 thousand generates results very similar to the data from here: (removed due to URL limit - but trust me, the results are very similar). This array is of length specified by the user. If need be, sort the array from smallest to largest. Play X number of games, again specified by the user. This is done by taking the array of players (which is sorted by Current Rating after being created) and running through it in groups of 10. The first five are on team one, the second five are on team two. It then takes the True Rating of these players and calculates an expected chance to win using the Elo system. It generates a random double and compares it to the expected chance to win; if the number is lower, team one wins - otherwise team two wins. I then update the rating of the players via, again, the Elo system - giving the winning team a score of 1 and the losing team a score of 0. I use a K value of 36 (but have tried 12, 24, and even higher ones) and an F value of 400. After going through the entire loop of players (which I have conveniently forced to be a multiple of ten), it sorts the array - again via current rating. This, if my understanding of the Elo system is correct, runs properly. However, it doesn't seem to work. I have a running test telling me how many players of the full array are within 100 current rating of their true rating. I would expect some portion of the population to be outside this range (as probability is not always going to go in their favor), but a full 40-45% of the population is outside of this range. I also have it outputting the maximum difference between true and current rating - and I have never seen this drop below 500! It hovers between 550-600, occasionally going over or under. I'm at a loss as to what to change - I've fiddled with the K and F values, where I start all the players, etc. but nothing changes the fact that eventually a good 40% of the population is outside the range. And it isn't that I have it playing too few games - it's now run through over 60 thousand games and the problem never disappears or really fluctuates. The full C# code, including everything except the XAML file and the Player class (pastebin is being very slow and I can only post two links, so I can't link to the XAML file): http://pastebin.com/rFcZRL84 The Player class: http://pastebin.com/4cJTdTRu I guess my question is did I do anything wrong? Is there a problem with the way I implemented the system, or is it just that Riot uses a significantly modified Elo system? I don't think it's the latter, as that still wouldn't explain the massive true and current rating differences to me, however.

    Read the article

  • database design help for game / user levels / progress

    - by sprugman
    Sorry this got long and all prose-y. I'm creating my first truly gamified web app and could use some help thinking about how to structure the data. The Set-up Users need to accomplish tasks in each of several categories before they can move up a level. I've got my Users, Tasks, and Categories tables, and a UserTasks table which joins the three. ("User 3 has added Task 42 in Category 8. Now they've completed it.") That's all fine and working wonderfully. The Challenge I'm not sure of the best way to track the progress in the individual categories toward each level. The "business" rules are: You have to achieve a certain number of points in each category to move up. If you get the number of points needed in Cat 8, but still have other work to do to complete the level, any new Cat 8 points count toward your overall score, but don't "roll over" into the next level. The number of Categories is small (five currently) and unlikely to change often, but by no means absolutely fixed. The number of points needed to level-up will vary per level, probably by a formula, or perhaps a lookup table. So the challenge is to track each user's progress toward the next level in each category. I've thought of a few potential approaches: Possible Solutions Add a column to the users table for each category and reset them all to zero each time a user levels-up. Have a separate UserProgress table with a row for each category for each user and the number of points they have. (Basically a Many-to-Many version of #1.) Add a userLevel column to the UserTasks table and use that to derive their progress with some kind of SUM statement. Their current level will be a simple int in the User table. Pros & Cons (1) seems like by far the most straightforward, but it's also the least flexible. Perhaps I could use a naming convention based on the category ids to help overcome some of that. (With code like "select cats; for each cat, get the value from Users.progress_{cat.id}.") It's also the one where I lose the most data -- I won't know which points counted toward leveling up. I don't have a need in mind for that, so maybe I don't care about that. (2) seems complicated: every time I add or subtract a user or a category, I have to maintain the other table. I foresee synchronization challenges. (3) Is somewhere in between -- cleaner than #2, but less intuitive than #1. In order to find out where a user is, I'd have mildly complex SQL like: SELECT categoryId, SUM(points) from UserTasks WHERE userId={user.id} & countsTowardLevel={user.level} groupBy categoryId Hmm... that doesn't seem so bad. I think I'm talking myself into #3 here, but would love any input, advice or other ideas. P.S. Sorry for the cross-post. I wrote this up on SO and then remembered that there was a game dev-focused one. Curious to see if I get different answers one place than the other....

    Read the article

  • Getting the number of fragments which passed the depth test

    - by Etan
    In "modern" environments, the "NV Occlusion Query" extension provides a method to get the number of fragments which passed the depth test. However, on the iPad / iPhone using OpenGL ES, the extension is not available. What is the most performant approach to implement a similar behaviour in the fragment shader? Some of my ideas: Render the object completely in white, then count all the colors together using a two-pass shader where first a vertical line is rendered and for each fragment the shader computes the sum over the whole row. Then, a single vertex is rendered whose fragment sums all the partial sums of the first pass. Doesn't seem to be very efficient. Render the object completely in white over a black background. Downsample recursively, abusing the hardware linear interpolation between textures until being at a reasonably small resolution. This leads to fragments which have a greyscale level depending on the number of white pixels where in their corresponding region. Is this even accurate enough? Use mipmaps and simply read the pixel on the 1x1 level. Again the question of accuracy and if it is even possible using non-power-of-two textures. The problem wit these approaches is, that the pipeline gets stalled which results in major performance issues. Therefore, I'm looking for a more performant way to accomplish my goal. Using the EXT_OCCLUSION_QUERY_BOOLEAN extension Apple introduced EXT_OCCLUSION_QUERY_BOOLEAN in iOS 5.0 for iPad 2. "4.1.6 Occlusion Queries Occlusion queries use query objects to track the number of fragments or samples that pass the depth test. An occlusion query can be started and finished by calling BeginQueryEXT and EndQueryEXT, respectively, with a target of ANY_SAMPLES_PASSED_EXT or ANY_SAMPLES_PASSED_CONSERVATIVE_EXT. When an occlusion query is started with the target ANY_SAMPLES_PASSED_EXT, the samples-boolean state maintained by the GL is set to FALSE. While that occlusion query is active, the samples-boolean state is set to TRUE if any fragment or sample passes the depth test. When the occlusion query finishes, the samples-boolean state of FALSE or TRUE is written to the corresponding query object as the query result value, and the query result for that object is marked as available. If the target of the query is ANY_SAMPLES_PASSED_CONSERVATIVE_EXT, an implementation may choose to use a less precise version of the test which can additionally set the samples-boolean state to TRUE in some other implementation dependent cases." The first sentence hints on a behavior which is exactly what I'm looking for: getting the number of pixels which passed the depth test in an asynchronous manner without much performance loss. However, the rest of the document describes only how to get boolean results. Is it possible to exploit this extension to get the pixel count? Does the hardware support it so that there may be hidden API to get access to the pixel count? Other extensions which could be exploitable would be debugging features like the number of times the fragment shader was invoked (PSInvocations in DirectX - not sure if something simila is available in OpenGL ES). However, this would also result in a pipeline stall.

    Read the article

  • SQL Authority News – FalafelCON 2014: 2 days with the Best Developers in the World

    - by Pinal Dave
    I love presenting at various forums on various technologies. I am extremely excited that I got invited to speak at Falafel Conference 2014 in San Francisco. I will present two technology sessions on SQL Server. If you are into web development or if you just want to attend a conference with the best of the industry speakers, this may be the right conference for you. What set apart this conference from other conference is technology presented as well as speakers. Usually one has to attend very expensive and high scale event when they have to hear good speakers. At this conference, you will find quite a many industry legends are available to present on the bleeding edge technology. Here are few of the reasons why I believe you should attend this conference: Choose from four tracks covering Web, Mobile development and testing, Sitefinity, and Automated Testing, or attend sessions from all four! Learn from the best developers and testers in the business in an intimate setting. Surround yourself with your peers and the opportunity to network Learn about the latest platforms and technologies including Kendo UI, AngularJS, ASP.NET MVC, WebAPI, and more! Here are the details for the sessions which I am going to present at Falafel Conference. Secrets of SQL Server: Database Worst Practices Abstract: Chances are you have heard, or even uttered, this expression. This demo-oriented session will show many examples where database professionals were dumbfounded by their own mistakes, and could even bring back memories of your own early DBA days. The goal of this session is to expose the small details that can be dangerous to the production environment and SQL Server as a whole, as well as talk about worst practices and how to avoid them. Shedding light on some of these perils and the tricks to avoid them may even save your current job. After attending this session, Developers will only need 60 seconds to improve performance of their database server in their SharePoint implementation. We will have a quiz during the session to keep the conversation alive. Developers will walk out with scripts and knowledge that can be applied to their servers, immediately post the session. Additionally, all attendees of the session will have access to learning material presented in the session. The Unsung Hero Abstract: Slow Running Queries are the most common problem that developers face while working with SQL Server. While it is easy to blame the SQL Server for unsatisfactory performance, however the issue often persists with the way queries have been written, and how Indexes has been set up. The session will focus on the ways of identifying problems that slow down SQL Server, and Indexing tricks to fix them. Developers will walk out with scripts and knowledge that can be applied to their servers, immediately post the session. Register Now! I have learned from the Falafel Team that they are running out of tickets and soon they will close the registration.  For next 10 days the price for the registration is only USD 149. Trust me, you can’t get such a world class training and networking opportunity at such a low price. Click to Register Here! Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL

    Read the article

  • Organization &amp; Architecture UNISA Studies &ndash; Chap 6

    - by MarkPearl
    Learning Outcomes Discuss the physical characteristics of magnetic disks Describe how data is organized and accessed on a magnetic disk Discuss the parameters that play a role in the performance of magnetic disks Describe different optical memory devices Magnetic Disk The way data is stored on and retried from magnetic disks Data is recorded on and later retrieved form the disk via a conducting coil named the head (in many systems there are two heads) The writ mechanism exploits the fact that electricity flowing through a coil produces a magnetic field. Electric pulses are sent to the write head, and the resulting magnetic patterns are recorded on the surface below with different patterns for positive and negative currents The physical characteristics of a magnetic disk   Summarize from book   The factors that play a role in the performance of a disk Seek time – the time it takes to position the head at the track Rotational delay / latency – the time it takes for the beginning of the sector to reach the head Access time – the sum of the seek time and rotational delay Transfer time – the time it takes to transfer data RAID The rate of improvement in secondary storage performance has been considerably less than the rate for processors and main memory. Thus secondary storage has become a bit of a bottleneck. RAID works on the concept that if one disk can be pushed so far, additional gains in performance are to be had by using multiple parallel components. Points to note about RAID… RAID is a set of physical disk drives viewed by the operating system as a single logical drive Data is distributed across the physical drives of an array in a scheme known as striping Redundant disk capacity is used to store parity information, which guarantees data recoverability in case of a disk failure (not supported by RAID 0 or RAID 1) Interesting to note that the increase in the number of drives, increases the probability of failure. To compensate for this decreased reliability RAID makes use of stored parity information that enables the recovery of data lost due to a disk failure.   The RAID scheme consists of 7 levels…   Category Level Description Disks Required Data Availability Large I/O Data Transfer Capacity Small I/O Request Rate Striping 0 Non Redundant N Lower than single disk Very high Very high for both read and write Mirroring 1 Mirrored 2N Higher than RAID 2 – 5 but lower than RAID 6 Higher than single disk Up to twice that of a signle disk for read Parallel Access 2 Redundant via Hamming Code N + m Much higher than single disk Highest of all listed alternatives Approximately twice that of a single disk Parallel Access 3 Bit interleaved parity N + 1 Much higher than single disk Highest of all listed alternatives Approximately twice that of a single disk Independent Access 4 Block interleaved parity N + 1 Much higher than single disk Similar to RAID 0 for read, significantly lower than single disk for write Similar to RAID 0 for read, significantly lower than single disk for write Independent Access 5 Block interleaved parity N + 1 Much higher than single disk Similar to RAID 0 for read, lower than single disk for write Similar to RAID 0 for read, generally  lower than single disk for write Independent Access 6 Block interleaved parity N + 2 Highest of all listed alternatives Similar to RAID 0 for read; lower than RAID 5 for write Similar to RAID 0 for read, significantly lower than RAID 5  for write   Read page 215 – 221 for detailed explanation on RAID levels Optical Memory There are a variety of optical-disk systems available. Read through the table on page 222 – 223 Some of the devices include… CD CD-ROM CD-R CD-RW DVD DVD-R DVD-RW Blue-Ray DVD Magnetic Tape Most modern systems use serial recording – data is lade out as a sequence of bits along each track. The typical recording used in serial is referred to as serpentine recording. In this technique when data is being recorded, the first set of bits is recorded along the whole length of the tape. When the end of the tape is reached the heads are repostioned to record a new track, and the tape is again recorded on its whole length, this time in the opposite direction. That process continued back and forth until the tape is full. To increase speed, the read-write head is capable of reading and writing a number of adjacent tracks simultaneously. Data is still recorded serially along individual tracks, but blocks in sequence are stored on adjacent tracks as suggested. A tape drive is a sequential access device. Magnetic tape was the first kind of secondary memory. It is still widely used as the lowest-cost, slowest speed member of the memory hierarchy.

    Read the article

< Previous Page | 436 437 438 439 440 441 442 443 444 445 446 447  | Next Page >