Search Results

Search found 24755 results on 991 pages for 'linux mom'.

Page 441/991 | < Previous Page | 437 438 439 440 441 442 443 444 445 446 447 448  | Next Page >

• route command not being executed in rc.local

  - by user1265478

  I tried adding route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0 to my Fedora rc.local file, but it's not being executed when Fedora boots up. What can I do to fix this? update: i changed to the full path cmd in my rc.local /sbin/route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0 but its not being executed. I change it to sudo /sbin/route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0 it still doesnt work although it works when i manually enter it in the terminal.

  Read the article

• How can I ensure that my static ip address is read from /etc/network/interfaces rather than dhcp?

  - by jonderry

  This is a follow up to the following question. I'm trying to set a static IP by changing /etc/network/interfaces to the following: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.2.133 netmask 255.255.255.0 gateway 192.168.2.1 dns-nameservers 8.8.8.8 and then running /sbin/ifdown eth0; /sbin/ifup eth0. However, the change in IP address doesn't appear to take effect without editing /etc/dhcp/dhclient.conf and commenting out the following before running ifdown; ifup: request subnet-mask, broadcast-address, time-offset, routers, domain-name, domain-name-servers, domain-search, host-name, dhcp6.name-servers, dhcp6.domain-search, netbios-name-servers, netbios-scope, interface-mtu, rfc3442-classless-static-routes, ntp-servers, dhcp6.fqdn, dhcp6.sntp-servers; Strangely, after commenting out this line, running ifdown; ifup works, but when I uncomment it, the behavior does not revert to the previous behavior of ignoring changes to my settings in /etc/network/interfaces (this doesn't seem like a problem, but I really need to be able to repeat this problem so that I can be confident that my solution is robust) Also, I'd rather not have to edit /etc/dhcp/dhclient.conf to change my static IP since it seems I should be able to do this by only editing interfaces. Can anyone explain the issues I'm seeing above and suggest the best way of making changes to static IP addresses take effect that admits reproducibility so that I can be sure that my approach works?

  Read the article

• u32 filter udp lenght 0 to 29

  - by Mark Ocok

  Sep 30 18:20:02 30AA30 kernel: ** IN_UDP DROP ** IN=eth0 OUT= MAC=b8:ac:6f:99:8e:b2:a8:d0:e5:bf:71:81:08:00 SRC=66.225.232.169 DST=68.68.27.84 LEN=28 TOS=0x00 PREC=0x00 TTL=49 ID=21668 DF PROTO=UDP SPT=48153 DPT=16078 LEN=8 Sep 30 18:20:02 30AA30 kernel: ** IN_UDP DROP ** IN=eth0 OUT= MAC=b8:ac:6f:99:8e:b2:a8:d0:e5:bf:71:81:08:00 SRC=66.225.232.169 DST=68.68.27.84 LEN=28 TOS=0x00 PREC=0x00 TTL=49 ID=21669 DF PROTO=UDP SPT=48153 DPT=16078 LEN=8 Sep 30 18:20:02 30AA30 kernel: ** IN_UDP DROP ** IN=eth0 OUT= MAC=b8:ac:6f:99:8e:b2:a8:d0:e5:bf:71:81:08:00 SRC=66.225.232.169 DST=68.68.27.84 LEN=28 TOS=0x00 PREC=0x00 TTL=49 ID=21670 DF PROTO=UDP SPT=48153 DPT=16078 LEN=8 Sep 30 18:20:02 30AA30 kernel: ** IN_UDP DROP ** IN=eth0 OUT= MAC=b8:ac:6f:99:8e:b2:a8:d0:e5:bf:71:81:08:00 SRC=66.225.232.169 DST=68.68.27.84 LEN=28 TOS=0x00 PREC=0x00 TTL=49 ID=21671 DF PROTO=UDP SPT=48153 DPT=16078 LEN=8 It's Spoofing attack dos, how to block Spoofing UDP lenght 0 to 29 using u32 Flooder target udp length udp 0 to 29

  Read the article

• How to restrict all services to single domain in Ubuntu?

  - by harold

  Someone has pointed an unknown domain to my server's IP address likely via A records. I would like to reject access to ALL services (httpd, ssh, mail, etc.) from this domain and only allow requests from my domain. I want to make it so when I connect to that domain it's completely rejected from my server. I can disallow access from HTTP by changing my web server settings, but I want to do this for every single type of connection. How can I do this?

  Read the article

• Allow SFTP in iptables

  - by Kevin Orriss

  I have just purchased a VPS from linode and am going through the setup guide. I have everything running (apache2, php, mysql etc) but I am being denied access via SFTP when using fileZilla to upload a file. Now this is my second time installing the server as I missed a section out the first time. I was able to connect to my server through SFTP on filezilla the first time and the thing I missed out was adding a new user and editing the iptables in the firewall. So it would seem that the guide I have been following has blocked SFTP but allowed SSH. Here is the iptables file: *filter # Allow all loopback (lo0) traffic and drop all traffic to 127/8 that doesn't use lo0 -A INPUT -i lo -j ACCEPT -A INPUT ! -i lo -d 127.0.0.0/8 -j REJECT # Accept all established inbound connections -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow all outbound traffic - you can modify this to only allow certain traffic -A OUTPUT -j ACCEPT # Allow HTTP and HTTPS connections from anywhere (the normal ports for websites and SSL). -A INPUT -p tcp --dport 80 -j ACCEPT -A INPUT -p tcp --dport 443 -j ACCEPT # Allow SSH connections # # The -dport number should be the same port number you set in sshd_config # -A INPUT -p tcp -m state --state NEW --dport 22 -j ACCEPT # Allow ping -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT # Log iptables denied calls -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 # Reject all other inbound - default deny unless explicitly allowed policy -A INPUT -j REJECT -A FORWARD -j REJECT COMMIT All I would like is a line I need to put in there which allows SFTP over port 22. Thank you for reading this.

  Read the article

• Does urandom share the same entropy of random?

  - by ???

  Does the entropy pool /dev/random used the same to /dev/urandom? I want to mknod /dev/random 1 9 to replace the slow random, I think the current entropy is randomly enough, if urandom is based on the same entropy, and all succeed random numbers are generated based on that entropy, I don't think there'll be any vulnerable.

  Read the article

• If I run this command, will my Apache2 still work?

  - by Alex

  sudo ln -s /etc/apache2/mods-available/deflate.load /etc/apache2/mods-enabled/ sudo service apache2 restart Basically I just want to turn on gzip for Apache2. I don't want to break anything!! Please, tell me that nothing will break when I run these commands.

  Read the article

• What steps should I take to secure Tomcat 6.x?

  - by PAS

  I am in the process of setting up an new Tomcat deployment, and want it to be as secure as possible. I have created a 'jakarta' user and have jsvc running Tomcat as a daemon. Any tips on directory permissions and such to limit access to Tomcat's files? I know I will need to remove the default webapps - docs, examples, etc... are there any best practices I should be using here? What about all the config XML files? Any tips there? Is it worth enabling the Security manager so that webapps run in a sandbox? Has anyone had experience setting this up? I have seen examples of people running two instances of Tomcat behind Apache. It seems this can be done using mod_jk or with mod_proxy... any pros/cons of either? Is it worth the trouble? In case it matters, the OS is Debian lenny. I am not using apt-get because lenny only offers tomcat 5.5 and we require 6.x. Thanks!

  Read the article

• How to get a list of Dovecot IMAP users

  - by Colt McCormack

  How do you get a list of users for a dovecot email server that connect via IMAP (as opposed to POP)? Our server is setup to authenticate via LDAP/PAM. Is there an easy way to get a list of the users who are accessing their mail via IMAP, rather than POP? I am about to migrate our server to Google Apps and want to migrate all of the mail for my IMAP users only (couple hundred out of several hundred total users). POP mail will be migrated separately from the client end obviously. I would much rather migrate only the IMAP users rather than the whole domain which would include migrating a bunch of POP mail left in the server that has already been read/sorted/deleted in the client's email program. Migrating all of that extra useless leftover POP mail could waste weeks of migration time. I suppose parsing some logs to see who has connected on an IMAP port (995 or 993) would give me a list would work if someone could help me do that. I know I have the raw dovecot logs, but am hoping for a cleaner solution.

  Read the article

• dhclient.conf: Send 2x host-names to the DHCP server?

  - by RobM

  Already working: Debian box DHCP with send host-name me.company.com in dhclient.conf DNS updates automatically with an entry for me.company.com What I want to add: Send a second host-name, so both are automatically registered with DNS In other words: I want a DHCP client to register with DNS twice using different names, preferably without having to maintain DNS records manually. Is this even possible with DHCP?

  Read the article

• Using Plesk to setup MySQL

  - by chris

  Having trouble getting my mysql up and running on a new virtual server. The host gave me Plesk and I think MySQL is installed but I can't seem to access it. I keep getting this: mysql -u admin -p Enter password: ERROR 1045 (28000): Access denied for user 'admin'@'localhost' (using password: YES) How do I make sure its running properly? How do I reset the root password? (I have root access to the server)

  Read the article

• securing communication between 2 Linux servers on local network for ports only they need access to

  - by gkdsp

  I have two Linux servers connected to each other via a cross-connect cable, forming a local network. One of the servers presents a DMZ for the other server (e.g. database server) that must be very secure. I'm restricting this question to communication between the two servers for ports that only need to be available to these servers (and no one else). Thus, communication between the two servers can be established by: (1) opening the required port(s) on both servers, and authenticating according to the applications' rules. (2) disabling IP Tables associated with the NIC cards the cross-connect cable is attached to (on both servers). Which method is more secure? In the first case, the needed ports are open to the external world, but protected by user name and password. In the second case, none of the needed ports are open to the outside world, but since the IP Tables are disabled for the NIC cards associated with the cross-connect cables, essentially all of the ports may be considered to be "open" between the two servers (and so if the server creating the DMZ is compromized, the hacker on the DMZ server could view all ports open using the cross-connect cable). Any conventional wisdom how to make the communication secure between two servers for ports only these servers need access to?

  Read the article

• Open file without specifying exact location

  - by person

  Say I have a file in some obscure directory that I want to open and edit. I don't want to do something like this... vim ~/foo/bar/blah/doh/ugh.txt I'd rather be able to say find this file and open it. I know there are commands like locate and find to find a file or directory, but I'm not sure whether these can (or even should) be utilized in what I'm trying to do. Basically, what is the simplest way to open a file with a program w/o specifying its exact location? (In cases where there isn't another file with the same name in the entire system, and cases where there are multiple).

  Read the article

• Eject LiveCD + Reboot

  - by JPerkSter

  We use LiveCD's alot in my line of work. Whether it be fscking file systems, recovering data from a customer to rm'd his server, etc. I'm looking for a quick way to eject the CDROM and reboot the server. Does anyone have any one-liners to do this or any other suggestions? Using 'eject' doesn't work most of the time, from what I've tested / used. We're using RHEL / Cent on most of our servers if that helps :D

  Read the article

• Cross-platform centralized desktop password manager

  - by Dave

  I have been using KeePass as a desktop password manager on Windows for many years. Love it! However, I am now needing to work on different platforms much of my day (Windows 7, Windows XP, Mac OS X, Ubuntu, and OpenSUSE.) I'm looking for a password manager I can share across all these platforms. My ideal solution would: Run natively (not in a virtual machine) on all platforms. Store the "official" copy of the password data on a local network so I can get to it from any and all machines. It is OK if it locks (or becomes read-only) when one client is accessing it. Keep a local cached copy (read-only is fine) so I can still get to my passwords when disconnected from the network. Does any such beast exist?

  Read the article

• How to retry connections with wget?

  - by Andrei

  I have a very unstable internet connection, and sometimes have to download files as large as 200 MB. The problem is that the speed frequently drops and sits at --, -K/s and the process remains alive. I thought just to send some KILL signals to the process, but as I read in the wget manual about signals it doesn't help. How can I force wget to reinitialize itself and pick the download up where it left off after the connection drops and comes back up again? I would like to leave wget running, and when I come back, I want to see it downloading, and not waiting with speed --,-K/s.

  Read the article

• Lighttpd based server issues crop up when port forwarding

  - by michael

  I have four host computers running lighttpd webservers. they are sitting behind a hspa modem, which each occupying a http port between [81 - 84]. 80 is taken by the modem itself. The port forwarding is setup correctly, however, only a portion of any webpage I request from any of the hosts comes through (they all fails after %20 of the page). If I put the host on port 81 into the dmz, it serves pages fine. The others do not respond to the dmz treatment. Is it possible the web content on the hosts somehow require ports aside from their respective http port? Or is it possible that even though the server.port in the lighttpd_ssl.conf file is set, the individual hosts are still expecting to serve on port 80? I am not familiar with lighttpd, nor did i set them up. they are running on video encoders i purchased. I can grab any files from them required for further information on the problem.

  Read the article

• Bonding and default gateway problem (CentOS)

  - by lg

  I configured network bonding on two machine with centos 5.5. Bonding works well, but the problem is default gateway: it is not configured! I follow this tutorial. I added GATEWAY in both (and either) /etc/sysconfig/network and /etc/sysconfig/network-scripts/ifcfg-bond0. But, when I restart network (or server) there is no default gateway (route command). This is ip route ls output after network restart: 10.0.0.0/16 dev bond0 proto kernel scope link src 10.0.0.88 Where is my mistake?

  Read the article

• How can I check for a string match AND an empty file in the same if/then bash script statement?

  - by Mike B

  I'm writing a simple bash script to do the following: 1) Check two files (foo1 and foo2). 2) If foo1 is different from foo2 and foo1 NOT blank, send an email. 3) If foo1 is the same as foo2... or foo1 is blank... do nothing. The blank condition is what's confusing me. Here's what I've got to start with: diff --brief <(sort ./foo1) <(sort ./foo2) >/dev/null comp_value=$? if [ $comp_value -ne 0 ] then mail -s "Alert" [email protected] <./alertfoo fi Obviously this doesn't check for blank contents. Any thoughts on how to do that?

  Read the article

• Ubuntu stops auto-mounting flash drive

  - by Brian

  It seems that after being up for a few days, my Ubuntu system refuses to auto-mount hot-plugged USB disks (i.e. flash drives). The output from dmesg shows that the kernel recognizes the device correctly. The only solution I'm aware of at the moment is to reboot (logging out may work as well, but the impact is the same since I have a bunch of stuff open and it takes a few minutes to get everything situated after startup/login). I thought gvfs-fuse-daemon was the thing responsible for managing filesystems in userspace, but killing and restarting that doesn't help. Any other ideas?

  Read the article

• Why are no application folders being created in home folder?

  - by person

  For example, when I do something like... sudo apt-get install vim No .vim folder is created in the home folder.

  Read the article

• How can I access another user's home?

  - by Jason94

  I'm on a network where I have the rights, but how do I do it? I've been asked to look up another user's aliases for reference.

  Read the article

• I tried installing Ubuntu 10.04 and I got this message - any ideas on what to do?

  - by user41926

  No root file system defined. Please correct this from the partition menu. This message shows up when I first boot into Ubuntu after the installation. I installed it by mounting the ISO with Daemon Tools, and I just did the default Wubi installation. I keep reading everywhere that I need to choose my installation directory, but I don't get any option to do that. These are all the options I get for installation directory. I have a C and D partition on my drive, and I tried installing it on both and no luck either way. Any ideas?

  Read the article

• Run a service after networking is ready on Ubuntu?

  - by TK Kocheran

  I'm trying to start a service that depends on networking being started, whenever the computer is rebooted. I have a few questions: Is this easily possible from an /etc/init.d script? I have tried creating a script here (conforming to the standards), but I'm really doubtful that it's even running on boot, let alone working. When I test it manually, it works. I've seen the new Upstart service, but as far as how that actually works, I'm completely in the dark. How can I make a script that runs on boot which runs after networking has been started? If I could run it after connected to wireless network, even better :)

  Read the article

• Why should I use a puppet parametrized class?

  - by robbyt

  Generally when working with complex puppet modules, I will set variables at the node level or inside a class. e.g., node 'foo.com' { $file_owner = "larry" include bar } class bar { $file_name = "larry.txt" include do_stuff } class do_stuff { file { $file_name: ensure => file, owner => $file_owner, } } How/when/why does parametrized classes help when this situation? How are you using parametrized classes to structure your puppet modules?

  Read the article

< Previous Page | 437 438 439 440 441 442 443 444 445 446 447 448  | Next Page >