Search Results

Search found 24708 results on 989 pages for 'internet filter'.

Page 443/989 | < Previous Page | 439 440 441 442 443 444 445 446 447 448 449 450  | Next Page >

  • xp vpn client dns issue

    - by David Archer
    Hi All, I have a problem with dns when connected to my work vpn. For ease of explanation I'll use the following in my outline of the problem: - name of my machine on work network is REMOTE_XP (original i know) - ip of my machine on work network is 192.168.2.80 - name of my machine on my local network is LOCAL_XP - ip of my machine on my local network is 10.0.0.3 What I want to be able to do when connected to vpn: - browse the internet from LOCAL_XP - ping by name REMOTE_XP Now it seems I've so far mentioned either 1 but not both of my wishlist. If i go to my vpn network properties (on LOCAL_XP) and uncheck the "use default dns on remote network" then I can browse the internet from my local machine but can't ping REMOTE_XP (though I can ping 192.168.2.80) If I check "use default dns..." then I can ping REMOTE_XP but can't browse the internet from LOCAL_XP. Is there a way I can have my dns cake and eat it, or will I have to accept that it will be an either/or situation? Thanks in advance.

    Read the article

  • Can I issue wireless clients with IP address on different subnet?

    - by Beanz
    We have a very standard setup with a Windows Server 2003 domain controller issuing IP addresses using DHCP. This works fine. Internet access is managed via Microsoft ISA Server 2006 Standard. Clients are required to authenticate and this works fine. We now need to provide wireless internet access to visitors for laptops, iPhones etc. We've bought a couple of Netgear access points so I was thinking we might be able to issue wireless clients connected to it with an IP address on a different subnet and then allow non-authenticated Internet access via the ISA Server for that IP range. Does that sound plausible? I'm not even sure if I can issue a different subnet to wireless clients.

    Read the article

  • Configuring home wireless network

    - by dvanaria
    I'm new to setting up a home wireless network. I have Comcast tv/internet/phone service (modem included) as well as a wireless router. My question is pretty basic. How can I tell the performance of the following parts of the network? 1. incoming internet speed 2. speed of the modem 3. speed of the wireless router I basically want as fast an internet connection as possible, of course, but I'm not sure where to look for the bottleneck (and so, not sure where I can spend some money to speed things up). Right now I'm getting about 36 Mbps (as it shows in Windows). If I run an online speed test (xfinity has one) it shows Average download speed of 14.91 Mbps and Average upload speed of 5.72 Mbps. Thanks for your help.

    Read the article

  • Active Desktop cannot be restored on Win XP

    - by Phil.Wheeler
    This is more of a major annoyance than anything that's stopping me from doing my work, but I somehow seem to have had Active Desktop on my work XP machine get corrupted and now can't get it back working again. I've tried browsing to C:\Documents and Settings\%my-user-name%\Application Data\Microsoft\Internet Explorer and changing, deleting or replacing the Desktop.htt file, but it's not achieving anything. The error I was previously getting when trying to click the "Restore my active desktop" button was: Internet Explorer Script Error An error has occurred in the script on this page. Line: 65 Char: 1 Error: Object doesn't support this action Code: 0 URL: file://C:/Documents%20and%20Settings//Application %20Data/Microsoft/Internet%20Explorer/Desktop.htt Any ideas?

    Read the article

  • Subdomains for different applications on Windows Server 2008 R2 with Apache and IIS 7 installed

    - by Yusuf
    I have a home server, on which I have installed Apache, and several other applications that have a Web GUI (JDownloader, Free Download Manager). In order to access each of these apps (whether be it from the local network or the Internet), I have to enter a different port, e.g., http://server:8085 or http://xxxx.dyndns.org:8085 for Apache http://server:90 or http://xxxx.dyndns.org:90 for FDM http://server:8081 or http://xxxx.dyndns.org:8081 for JDownloader I would like to be able to access them using sub-domains, e.g, http://apache.server or http://apache.xxxx.dyndns.org for Apache, http://fdm.server or http://fdm.xxxx.dyndns.org for FDM, http://jdownloader.server or http://jdownloader.xxxx.dyndns.org for JDownloader First of all, would it be possible like I want it, i.e., both from LAN and Internet, and if yes, how? Even if it's possible only for Internet, I would like to know how to do it, if there's a way.

    Read the article

  • Wired network on computer to wifi

    - by user329592
    I just got myself a wifi capable cell phone, but I dont have a wireless internet at home. I do have a wired unlimited internet connection on my computer, and I wonder whether there is any gadget that I can plug into my computer (maybe at the usb port?) with which I can turn my computer into a wifi access point? I mean, a dongle or something which will enable me to connect my phone to my computer's internet through wi-fi? Also, I dont know anything about networking, so would it be hard for me to set up a secure wifi point? Thank you for reading this question through. Hope I can buy some sort of adapter which is comparitively cheap.

    Read the article

  • VirtualBox networking problem, host XP, guest Debian

    - by Silma
    Hi, I'm trying to set up a development environment in a virtual machine on my laptop, with debian os. I have both lan and wlan available on the host machine, yet I can't connect to the internet using either. As I said the host OS is windows XP and the guest OS will be the latest Debian, we downloaded the business card net install so we need internet access from the beginning, besides we need the virtual machine to be visible on the local network (for my fellow developers). We tried host-only networking, NAT, bridging, with proxy (the local network uses a proxy to connect to the internet) and without proxy, nothing seems to work. What else can we do? Thanks a lot.

    Read the article

  • Virtual guest does not have network access in cafe.

    - by blee
    My Virtualbox guest OS (Ubuntu on ubuntu host) does not connect to the internet when I have wifi access through an internet cafe system. By this, I mean where your browser redirects to an internal web page where you can enter a code. On the guest, I can successfully connect to the virtual network adapter, but I do not get internet access, nor a redirect to the internal web page. I use OpenDNS for the host. I have no problems when connecting through ethernet or regular wifi. Can someone tell me any of: 1) How to fix the problem. 2) How such cafe systems work. 3) At least point me to a technical explanation of such a cafe system so I can begin to troubleshoot. Thanks!

    Read the article

  • How do I set up an IP address on a Linux VM running in VM Player so I can access it from my Windows 7 host?

    - by BradyKelly
    I have just installed an Openbravo appliance on my Windows 7 VM Player host. I am now staring at a command prompt that tells me to go to http://localhost to access the ERP system, but I cannot find any browser on the appliance. I am guessing I should rather follow their advice to configure an IP address for the Linux VM and just access that from a Windows browser on my host. How do I go about this? More specifically, How do I choose a local IP address to assign? How do I set things up so that this IP address is visible to my Windows host? Their help says to assign an DNS, to make the server visible to the internet, but internet visibility per se is not needed. How should I interpret or adapt this help for that? Finally to make the IP address available to the Internet, assign some DNS servers to it: $ echo "nameserver IP_DNS1" /etc/resolv.conf $ echo "nameserver IP_DNS2" /etc/resolv.conf

    Read the article

  • UTP cable for telephone line possible?

    - by Chris
    Hi, One of my customers has build a new house with pre-installed cables for internet. The only thing he didn't think about was installing a cable for his telephone line. Behind his desk, he has a "spare" UTP cable, my question. Can this cable be used to replace a telephone line. This client has a internet and telephony contract, using a experiabox phone/internet modem. Any help would be great. I knowe I have to use a RJ11 plug.

    Read the article

  • Share the DVB card on windows 7

    - by Bashar Kernel
    I have 2 computers connected to a router and I have a DVB card in one of them. I want to use the one DVB card to feed both of them. I read about it and I know that I want to share the DVB adapter with the Internet Connection Sharing on the LAN network. But when I use the connection sharing, I lose my internet access I tried to use "Bridge Connection", but then I also lost my internet access too. Can any one tell me how to fix this problem? And how to view the channels (for example how to use the VLC)?

    Read the article

  • Why you need to tag your build servers in TFS

    - by Martin Hinshelwood
    At SSW we use gated check-in for all of our projects. The benefits are based on the number of developers you have working on your project. Lets say you have 30 developers and each developer breaks the build once per month. That could mean that you have a broken build every day! Gated check-ins help, but they have a down side that manifests as queued builds and moaning developers. The way to combat this is to have more build servers, but with that comes complexity. Inevitably you will need to install components that you would expect to be installed on target computers, but how do you keep track of which build servers have which bits? What about a geographically diverse team? If you have a centrally controlled infrastructure you might have build servers in multiple regions and you don’t want teams in Sydney copying files from Beijing and vice a versa on a regular basis. So, what is the answer. Its Tags. You can add a set of Tags to your agents and then set which tags to look for in the build definition. Figure: Open up your Build Controller Manager Select “Build | Manage Build Controllers…” to get a list of all of your controllers and he build agents that are associated with them. Figure: the list of build agents and their controllers Each of these Agents might be subtly different. For example only one of these agents has FTP software installed. This software is required for only one of the many builds we have set up. My ethos for build servers is to keep them as clean as possible and not to install anything that is not absolutely necessary. For me that means anything that does not add a *.target file is suspect, and should really be under version control and called via the command line from there. So, some of the things you may install are: Silverlight 4 SDK Visual Studio 2010 Visual Studio 2008 WIX etc You should not install things that will not end up on the target users computer. For a website that means something different to a client than to a server, but I am sure you get the idea. One thing you can do to make things easier is to create a tag for each of the things that you install. that way developers can find the things they need. We may change to using a more generic tagging structure (Like “Web Application” or “WinForms Application”) if this gets too unwieldy, but for now the list of tags is limited. Figure: Tags associated with one of our build agents Once you have your Build Agents all tagged up ALL your builds will start to fail This is because the default setting for a build is to look for an Agent that exactly matches the tags for the build, and we have not added any yet. The quick way to fix this is to change the “Tag Comparison Operator” from “ExactMatch” to “MatchAtLease” to get your build immediately working. Figure: Tag Comparison Operator changes to MatchAtLeast to get builds to run. The next thing to do is look for specific tags. You just select from the list of available tags and the controller will make sure you get to a build agent that uses them. Figure: I want Silverlight, VS2010 and WIX, but do not care about Location. And there you go, you can now have build agents for different purposes and regions within the same environment. You can also use name filtering, so if you have a good Agent naming convention you can filter by that for regions. For example, your Agents might be “SYDVMAPTFSBP01” and “SYDVMAPTFSBP02” so a name filter of “SYD*” would target all of the Sydney build agents. Figure: Agent names can be used for filtering as well This flexibility will allow you to build better software by reducing the likelihood of not having a certain dependency on the target machines. Figure: Setting the name filter based on server location  Used in combination there is a lot of power here to coordinate tens of build servers for multiple projects across multiple regions so your developers get the most out of your environment. Technorati Tags: ALM,TFBS,TFS 2010,TFS Admin

    Read the article

  • Load balance incoming traffic

    - by justin
    Dear All Please I have the following scenario. 3 servers voip / mail / terminal one load balancing router 2 internet connections (static ip`s) My concern is to load balance incoming traffic since the outgoing traffic is being taking care by the load balancing router. For instance all offices connect to the mail server via the internet same for voip and terminal services. The mail and voip clients are set up with one of the static ip`s and the router forwards the request to the appropriate server. But obviously like this there is no fail over nor load balancing cause all requests are being directed to one internet connection. Anyone has a suggestion was thing of a dns server, does this make sens ? or maybe a hosted option ? Thanks Justin

    Read the article

  • MIDI Over Networking on OSX: Lots of beachballing

    - by Yar
    I have 4 computers connected to a Wifi router (with no Internet uplink). Whenever we enter the Network interface for Audio/Midi preferences in ANY of the computers, the Mac beachballs and then finally finds its way. Occasionally, however, one of the computers fails to receive the MIDI information that was destined for it via the Network MIDI interface. Changing to all wired connections does NOT help. Adding Internet uplink DOES help and the problem is resolved. This makes no sense to me as the computers can access each other just fine with or without the Internet uplink. Any ideas? [NOTE: I'll update the question if people correct my terminology, or feel free to do that if you have the rights].

    Read the article

  • Force Steam (and other programs that do not specify proxy settings) to use a proxy

    - by joshhunt
    My school requires a proxy for all internet access. If you want to use the internet, it is impossible to not use a proxy. This makes it a problem for many programs that don't seem to let you enter proxy settings. How can I use Steam when I am behind a proxy? Is it possible to somehow enter the details into a configuration file, or force it to get the settings from Internet Explorer? If not, does software exist for creating a 'virtual' network adapter which will pass all traffic (or all protocol x traffic) through the proxy? Although I am facing this specific problem on Windows 7, solutions for all operating systems are welcome.

    Read the article

  • Round-up: Embedded Java posts and videos

    - by terrencebarr
    I’ve been collecting links to some interesting blog posts and videos related to embedded Java over the last couple of weeks. Passing  these on here: Freescale blog – The Embedded Beat: “Let’s make it real – Internet of Things” Simon Ritter’s blog: “Mind Reading with Raspberry Pi” NightHacking with Steve Chin and Terrence Barr: “Java in the Internet of Things” NightHacking with Steve Chin and Alderan Robotics: “The NAO Robot” Java Magazine: “Getting Started with Java SE for embedded devices on Raspberry Pi” OTN video interview: “Java at ARM TechCon” OPN Techtalk with MX Entertainment: “Using Java and MX’s GrinXML Framework to build Blu-ray Disc and media applications” Oracle PartnerNetwork Blog: “M2M Architecture: Machine to Machine – The Internet of Things – It’s all about the Data” YouTube Java Channel: “Understanding the JVM and Low Latency Applications” Cheers, – Terrence Filed under: Mobile & Embedded Tagged: blog, iot, Java, Java Embedded, Raspberry Pi, video

    Read the article

  • Round-up: Embedded Java posts and videos

    - by terrencebarr
    I’ve been collecting links to some interesting blog posts and videos related to embedded Java over the last couple of weeks. Passing  these on here: Freescale blog – The Embedded Beat: “Let’s make it real – Internet of Things” Simon Ritter’s blog: “Mind Reading with Raspberry Pi” NightHacking with Steve Chin and Terrence Barr: “Java in the Internet of Things” NightHacking with Steve Chin and Alderan Robotics: “The NAO Robot” Java Magazine: “Getting Started with Java SE for embedded devices on Raspberry Pi” OTN video interview: “Java at ARM TechCon” OPN Techtalk with MX Entertainment: “Using Java and MX’s GrinXML Framework to build Blu-ray Disc and media applications” Oracle PartnerNetwork Blog: “M2M Architecture: Machine to Machine – The Internet of Things – It’s all about the Data” YouTube Java Channel: “Understanding the JVM and Low Latency Applications” Cheers, – Terrence Filed under: Mobile & Embedded Tagged: blog, iot, Java, Java Embedded, Raspberry Pi, video

    Read the article

  • Setting up shared connection

    - by Calvin Froedge
    I have a network that is connected to the internet via a switch connected to a router. I have it setup like this so I can work on the new network without causing problems on the old. Anyway, I'm trying to enable internet connection sharing. Internet comes to server like this: Modem - Router - Switch - Ubuntu 11.10 (Eth0) I want to share the connection through Eth1 (Eth1 - Managed Switch - Clients). Here is my config for /etc/network/interfaces: I have a DHCP server running on Eth1. Here is my config: ddns-update-style none; option domain-name "myserver.local"; option domain-name-servers 192.168.1.2, 8.8.8.8; default-lease-time 600; max-lease-time 7200; authoritative; subnet 192.168.1.0 netmask 255.255.255.0 { interface eth1; range 192.168.1.3 192.168.1.254; option routers 192.168.1.1; option subnet-mask 255.255.255.0; option broadcast-address 192.168.1.255; } Here is /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp #Used for internal network auto eth1 iface eth1 inet static address 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255 network 192.168.1.0 Here is /etc/hosts: 127.0.0.1 localhost 127.0.1.1 myserver.isp.com server 192.168.1.2 server.myserver.local server myserver.local In /etc/sysctl.conf, I've set the following: net.ipv4.ip_forward=1 Finally, in /etc/rc.local, I've set the following: /sbin/iptables -P FORWARD ACCEPT /sbin/iptables --table nat -A POSTROUTING -o eth1 -j MASQUERADE When I ping 8.8.8.8 (google's DNS) from a client that is authenticated with my DHCP server (they have been assigned a local ip, like 192.168.1.10), I get a timeout. How can I debug this further to figure out where my problem is?

    Read the article

  • Help me a routing server on Windows XP

    - by Lu Lu
    I am developing client/server applications and need to test them on Internet environment. However, I only have one PC without connecting the public internet, so I have a plan to simulate a virtual internet environment on my PC. I think I will install the virtual machines for my purpose, but I can install only one machine because of my slowly PC. At the moment, my PC has 2 machines: the host machine (use Windows XP) & the virtual machine (use Windows Server 2003 Ent). Each machine will have 2 network adapter (host-only & internal), and in 2 network adapters, the internal adapter is private on each machine, and host-only adapters are connected together. With Windows 2003, routing server is ok, but I wonder on Windows XP, are there any routing server product? Please help me. Thanks.

    Read the article

  • How to route traffic from a subnet 10.0.0.x to a network 200.208.88.17

    - by Guilherme Longo
    I have the following configuration Router : IP: 200.208.88.17 (Internet) MASK: 255.255.255.40 Server 2003 : IP: 10.0.0.1 (with dhcp server ativated) dhcp scope: 10.0.0.11 - 10.0.0.254 MASK: 255.255.255.0 clients : IP: 10.0.0.11 - 10.0.0.254 MASK: 255.255.255.0 At this point I have all computer set-up in one switch. All clients are receiving ip´s from the dhcp server. I need to enable the internet in every client. I am not sure how to route the traffic from the clients to the router that is providing internet access. Could you please point me to the right direction?

    Read the article

  • Making a home group

    - by Siddharth Warrier
    I have two computers in my house they are laptop and desktop and I use internet which is of wired connection and it has a modem. The modem has 1 LAN port and 1 USB port. So what I did is that I connected the desktop to the LAN which had Windows 7 Home Premium OS and Laptop to the USB which had Windows 7 Home Basic. As home group can be made with windows 7 home premium and above versions I made it via desktop. The home group was established and the data can be exchanged.But one problem I was able to access internet in desktop but not in laptop. So I tried to share internet but I am not able to do so..... So anyone there to help me ???????

    Read the article

  • How can I join two simple home networks together using an ethernet cable?

    - by Ilia Jerebtsov
    I want to join two different home networks together like so: PC A1 PC A2 PC B1 PC B2 \ / \ / Gateway A <----- ethr. cable -----> Gateway B | | ADSL modem A ADSL modem B Both networks are of the basic residential type with identical configuration, with all PCs running Vista/7. The point is to temporarily join two apartments in a building for gaming and file sharing, and the holy grail would be: PCs on network A can access PCs on network B and vice-versa (file shares and gaming). Each network uses its own internet connection. Data between networks shouldn't take a trip through the internet (broadband upload speeds are severely capped) A network's internet access should continue working if the joining cable is disconnected with minimal configuration changes. How closely can this be achieved?

    Read the article

  • Security Risks of Unsigned ClickOnce Manifests

    - by Tom Tom
    Using signed manifests in ClickOnce deployments, it is not possible to modify files after the deployment package has been published - installation will fail as hash information in the manifest won't match up with the modified files. I recently stumbled upon a situation where this was problematic - customers need to be able to set things like connection strings in app.config before deploying the software to their users. I got round the problem by un-checking the option to "Sign the ClickOnce manifests" in VS2010 and explicitly excluding the app.config file from the list of files to have hashes generated during the publish process. From a related page on MSDN "Unsigned manifests can simplify development and testing of your application. However, unsigned manifests introduce substantial security risks in a production environment. Only consider using unsigned manifests if your ClickOnce application runs on computers within an intranet that is completely isolated from the internet or other sources of malicious code." In my situation, this isn't an immediate problem - the deployment won't be internet-facing. However, I'm curious to learn what the "substantial security risks" of what I've done would be if it was internet-facing (or if things changed and it needed to be in the future). Thanks in advance!

    Read the article

  • Dual LAN Printing

    - by Christopher
    I want to use Ubuntu 10.10 Server in a classroom, a computer lab whose bandwidth is provided by a local cable ISP. That's no problem, though the school network has an IP printer that I want to use. I cannot reach the printer through the cable Internet. But, I have two network cards. How is it possible to use both networks at once? eth0 (static 192.168.1.254) is plugged into a four-port router, 192.168.1.1. On the public side of the four-port router is Internet provided by the cable company. I also have the classroom workstations plugged into a switch. The switch is plugged into the four-port router. The whole classroom is wired into the cable Internet. The other NIC, eth1, could it be plugged into an Ethernet jack in the wall? It uses the school network, and I might receive by DHCP an IP address like 10.140.10.100, with the printer on maybe 10.120.50.10. I was thinking about installing the printer on the server so that it could be shared with the workstations. But how does this work? Can I just plug eth1 into the school network and access both LANs? Thanks for any insight, Chris

    Read the article

  • wireless network with cable modem and access point

    - by hayri
    I have a Scientific Atlanta EPC2203 cable modem and a TP-Link TL-WA500G access point. When I connect my computer directly to modem with a CAT5e cable I have internet connection on my laptop (when i type ipconfig i see my external ip there, provided by isp). So I decided to have wireless network in the flat, allowing other devices to connect as well. I bought this wireless ap (TL-WA500G) configured Wireless security stuff, and connected it to my modem. With that configuration (by default AP has static ip of 192.168.1.254) only my computer can connect to internet over wifi, but not any other device. When I set the IP of AP to Dynamic IP (DHCP) it is the same. How should I change my configuration to enable all wifi devices to connect to internet?

    Read the article

< Previous Page | 439 440 441 442 443 444 445 446 447 448 449 450  | Next Page >