Search Results

Search found 12376 results on 496 pages for 'active pattern'.

Page 444/496 | < Previous Page | 440 441 442 443 444 445 446 447 448 449 450 451  | Next Page >

• Ubuntu box static routing problem

  - by Rafael

  Hello, I'm trying to configure a ubuntu server to be a router. This is my interface configuration (eth2 connects to my WAN, eth0 to my LAN): auto eth2 iface eth2 inet static address 192.168.0.249 netmask 255.255.255.0 gateway 192.168.0.1 broadcast 192.168.0.255 auto eth0 iface eth0 inet static address 192.168.100.1 netmask 255.255.255.0 This is the router information: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth2 And this is dhcp configuration: subnet 192.168.100.0 netmask 255.255.255.0 { range 192.168.100.101 192.168.100.254; option domain-name-servers 201.70.86.133; option routers 192.168.100.1; authoritative; } I'm then connecting a mac os x by cable on eth0. This is en0 interface configuration: en0: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether 00:26:bb:5d:82:b0 inet6 fe80::226:bbff:fe5d:82b0%en0 prefixlen 64 scopeid 0x4 inet 192.168.100.101 netmask 0xffffff00 broadcast 192.168.100.255 media: autoselect (100baseTX <full-duplex>) status: active And this is the routing table: Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.100.1 UGSc 139 32 en0 10.37.129/24 link#8 UC 2 0 vnic1 10.37.129.2 0:1c:42:0:0:9 UHLWI 0 839 lo0 10.37.129.255 ff:ff:ff:ff:ff:ff UHLWbI 0 4 vnic1 10.211.55/24 link#7 UC 2 0 vnic0 10.211.55.2 0:1c:42:0:0:8 UHLWI 0 840 lo0 10.211.55.255 ff:ff:ff:ff:ff:ff UHLWbI 0 4 vnic0 127 127.0.0.1 UCS 0 0 lo0 127.0.0.1 127.0.0.1 UH 3 507924 lo0 169.254 link#4 UCS 0 0 en0 172.16.42/24 link#10 UC 2 0 vmnet8 172.16.42.1 0:50:56:c0:0:8 UHLWI 0 839 lo0 172.16.42.255 link#10 UHLWbI 1 24 vmnet8 192.168.100 link#4 UC 2 0 en0 192.168.100.1 0:e0:7c:7e:f:99 UHLWI 139 0 en0 777 192.168.100.101 127.0.0.1 UHS 0 0 lo0 192.168.100.255 ff:ff:ff:ff:ff:ff UHLWbI 0 4 en0 192.168.116 link#9 UC 2 0 vmnet1 192.168.116.1 0:50:56:c0:0:1 UHLWI 0 839 lo0 192.168.116.255 ff:ff:ff:ff:ff:ff UHLWbI 0 4 vmnet1 When I ping 192.168.100.1, it works. When I ping 192.168.0.249, it also works. However, when I try to ping 192.168.0.1 it does not. Does anyone has any way to solve this? Is there a way to debug it? Thanks,

  Read the article

• HP MSR 30-10a Router - Route Traffic over Default Route

  - by SteadH

  We have a brand new HP MSR 30-10a Router. We have a fairly simple routing situation - we have two IP blocks, one which has a route out. We need things on the first block to go through the router, and out. I have an old Cisco 2801 router doing the job right now. For our example - IP Block 1: 50.203.110.232/29, Router interface on this block is 50.203.110.237, route out is 50.203.110.233. IP Block 2: 50.202.219.1/27, Router interface on this block at 50.202.219.20. I have a static route created for: 0.0.0.0 0.0.0.0 50.203.110.233 The router seems to understand this. When on the CLI via serial cable, I can ping 8.8.8.8 and hear responses from Google DNS. Woo hoo! The issue arrives when any client sits on the IP Block 2 side. I configured my client with a static IP of 50.202.219.15/27, default gateway 50.202.219.20. I can ping myself. I can ping the near side of the router (50.202.219.20), and I can ping the far side of the router (50.203.110.237. I cannot ping anything else in IP block 1, nor can I ping 8.8.8.8. Here is my configuration file: <HP>display current-configuration # version 5.20.106, Release 2507, Standard # sysname HP # domain default enable system # dar p2p signature-file flash:/p2p_default.mtd # port-security enable # undo ip http enable # password-recovery enable # vlan 1 # domain system access-limit disable state active idle-cut disable self-service-url disable # user-group system group-attribute allow-guest # local-user admin password cipher $c$3$40gC1cxf/wIJNa1ufFPJsjKAof+QP5aV authorization-attribute level 3 service-type telnet # cwmp undo cwmp enable # interface Aux0 async mode flow link-protocol ppp # interface Cellular0/0 async mode protocol link-protocol ppp # interface Ethernet0/0 port link-mode route ip address 50.203.110.237 255.255.255.248 # interface Ethernet0/1 port link-mode route ip address 50.202.219.20 255.255.255.224 # interface NULL0 # ip route-static 0.0.0.0 0.0.0.0 50.203.110.233 permanent # load xml-configuration # load tr069-configuration # user-interface tty 12 user-interface aux 0 user-interface vty 0 4 authentication-mode scheme # My guess right now is there is some sort of "permission" needed to use the default route. The manuals haven't turned up a lot in this area that don't make the situation much more complicated (but maybe it needs to be more complicated?) Background: we use HP switches, and I love the CLI. I bought HP thinking the command line interface would be similar, or at least speak the same language. Whoops! I'd be happy to provide more information or perform any additional tests. Thanks in advance! Update 1: The manual mentions routing rules. I hadn't previously added these (since our Cisco 2801 seems to route anything by default). I added: ip ip-prefix 1 permit 0.0.0.0 0 less-equal 32 alas, still no dice.

  Read the article

• Intermittent Disconnection of Client Computers from Domain Server

  - by dilip nagle

  The Background: I have Windows 2008 server Enterprise Version with 25 user cal licences. It has a domain and all users and a network shared HP printer in it. The Server has two network cards and both these cards as well as all client machines are on IP addressing scheme of 192.168.1.* with subnetmask 255.255.255.0. Of the two network cards viz. 192.168.1.231 and 192.168.1.233, only 192.168.1.231 is registered with DNS. In 192.168.1.233(i.e. 2nd network card) has default getway as 192.168.1.231 and dns address as 192.168.1.231. The Server has three hard disks with capacities as 500gb, 500gb and 1TB and are partitioned as (C,D,E), (F,G) and (K) with partition K having all user data into various Shared Folders. Each of these folders(On Partition K), are mapped onto each user's computer as per the right of access given to them. The Problem: The Server was installed about 6 months ago and till date not even once, the Server has Hung or has given any problem. All the Clients computers are able to run the web based software from their computers via ip address, e.g. http://192.168.1.231/webERP/default.aspx. However, occassionally, when any client computer tries to browse network mappings, it hangs. Again, there is no fixed pattern. This may happen after running smoothly for say 3 days. On each Client's machine, the network settings are as follows: IP Address: 192.168.1.* where * is 1,2,3 .... Sunnetmask: 255.255.255.0 defauly getway: 192.168.1.231 Which is a server card and DNS address. preferred DNS Server: 192.168.1.231 In Advanced Tab under Wins: LMHostLookup is Unticked and default is radio buttoned. Ideally, I would have loved to have Disabled NETBIOS over TCP/IP but some network printers do not get accessed if this option is enabled(ie. Radio Buttoned). Bacause Disabling Netbios will drastically reduce traffic of NETBIOS broadcasting to all the computers on the net to do naming resolution. On Server, I have WINs Running which I have Scavanged Records, verified Database Integrity etc, removed Tombstoned Records etc. The Critical Errors shown only once a day when the server is statred are 4224(WINS) and 12923 - Server Licencing failed to Update DNS Record. I fail to understand as why do client machines HANG when they try to browse mapped network shared folders on K Drive. Kindly Advice

  Read the article

• Link aggregation with freebsd8 and a cicso 3550, what am i doing wrong?

  - by Flamewires

  Hey, I am trying to setup Link Aggrigation with LACP (well, anything that provides increased bandwidth and failover using my setup will work). I'm running FreeBSD 8.0 on 3 machines. M1 is running 2 10/100 ethernetcards setup for link aggrigation using lagg. for reference: ifconfig em0 up ifconfig tx0 up ifconfig create lagg0 ifconfig lagg0 laggproto lacp laggport tx0 laggport em0 192.168.1.16 netmask 255.255.255.0 I plugged them into ports 1 and 2 of a Cicso 3550. then ran: configure terminal interface range Fa0/1 - 2 switchport mode access switchport access vlan 1 channel-group 1 mode active (everythings in vlan 1) Now Im able to connect the other computers to other ports on the switch and failover works great, i can unplug cables in the middle of a transfer and the traffic gets rerouted. However, im not noticing any speed increase. My test setup: load balancing: i tried dst and src on the switch, neither seemed to give me a speed increase. I am SCPing 2 500 meg files from the lagg computer to other computers (one each) which are also running 10/100 full duplex cards. I get transfer speeds of about 11.2-11.4 Mbps to a single host, and about half that (5.9-6.2) Mbps when transferring to both at the same time. From what I understood with destination load balancing the router was suppose to balance traffic headed for 1 computer over 1 port and traffic headed for another over a diff(in this case) the other port. With destination-MAC address forwarding, when packets are forwarded to an EtherChannel, the packets are distributed across the ports in the channel based on the destination host MAC address of the incoming packet. Therefore, packets to the same destination are forwarded over the same port, and packets to a different destination are sent on a different port in the channel. For the 3550 series switch, when source-MAC address forwarding is used, load distribution based on the source and destination IP address is also enabled for routed IP traffic. All routed IP traffic chooses a port based on the source and destination IP address. Packets between two IP hosts always use the same port in the channel, and traffic between any other pair of hosts can use a different port in the channel. (Link) What am i doing wrong/what would i need to do to see a speed increase beyond what i could do with just a single card?

  Read the article

• Crashes and freezes after fixing "BOOTMGR is missing" error

  - by Greg-J

  I came back from a 3-day weekend to a computer that was off. I leave my PC on 24/7, so this was odd. Turn it on to get the dreaded "BOOTMGR is missing" screen. Two attempts at Windows Recovery and it booted into Windows fine. After an hour or so, I get a frozen Chrome and my start bar disappears. Ctrl+Alt+Del brings up an error box telling me that Ctrl+Alt+Del failed to work properly. Clicking on any open application triggers an error (I can't recall the error now, but it essentially just said that the application couldn't be found running or something along those lines). I restart, and again, the same thing happens after a while of use. I turn it on, install the 47 updates I have or so, and then restart it. After a while of use (under an hour), it just freezes completely. My thoughts are: SSDs, RAM or PS. My system specs below: (RAID0) 2 x Crucial M4 CT128M4SSD2 2.5" 128GB SATA III MLC Internal Solid State Drive (SSD) CORSAIR Vengeance 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CML16GX3M4A1600C9 CORSAIR HX Series HX750 750W ATX12V 2.3 / EPS12V 2.91 SLI Ready CrossFire Ready 80 PLUS GOLD Certified Modular Active 1 x ASUS Maximus IV Gene-Z/GEN3 LGA 1155 Intel Z68 HDMI SATA 6Gb/s USB 3.0 Micro ATX Intel Motherboard 1 x Hitachi GST Deskstar 7K1000.C 0F10383 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive 1 x Intel Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics 1 x SAPPHIRE 21197-00-40G Radeon HD 7970 3GB 384-bit GDDR5 PCI Express 3.0 x16 HDCP Ready CrossFireX Support Video Card 1 x Noctua NH-D14 120mm & 140mm SSO CPU Cooler This is all crammed in a pretty small case (NZXT Vulcan) and has been running perfectly problem-free since January. The only thing out of the ordinary is that there is a fan in the case that is now making noise whereas the case has previously been completely silent. I have no reason to believe this is anything more then correlation, but felt it is worth mentioning. I believe it MAY be the SSDs simply because of the BOOTMGR error, but not sure how to test that theory. My belief that it may be the RAM is simply from experience with frozen machines. I haven't had the time to memtest it, but will. The PS being the culprit is something I've picked up by reading similar threads on various forums, and it seems plausible. I am unsure how to test this though. ANY insight whatsover would be greatly appreciated!

  Read the article

• Forwarding RDP via a Linux machine using iptables: Not working

  - by Nimmy Lebby

  I have a Linux machine and a Windows machine behind a router that implements NAT (the diagram might be overkill, but was fun to make): I am forwarding RDP port (3389) on the router to the Linux machine because I want to audit RDP connections. For the Linux machine to forward RDP traffic, I wrote these iptables rules: iptables -t nat -A PREROUTING -p tcp --dport 3389 -j DNAT --to-destination win-box iptables -A FORWARD -p tcp --dport 3389 -j ACCEPT The port is listening on the Windows machine: C:\Users\nimmy>netstat -a Active Connections Proto Local Address Foreign Address State (..snip..) TCP 0.0.0.0:3389 WIN-BOX:0 LISTENING (..snip..) And the port is forwarding on the Linux machine: # tcpdump port 3389 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 01:33:11.451663 IP shieldsup.grc.com.56387 > linux-box.myapt.lan.ms-wbt-server: Flags [S], seq 94663035, win 8192, options [mss 1460], length 0 01:33:11.451846 IP shieldsup.grc.com.56387 > win-box.myapt.lan.ms-wbt-server: Flags [S], seq 94663035, win 8192, options [mss 1460], length 0 However, I am not getting any successful RDP connections from the outside. The port is not even responding: C:\Users\outside-nimmy>telnet example.com 3389 Connecting To example.com...Could not open connection to the host, on port 3389: Connect failed Any ideas? Update Per @Zhiqiang Ma, I looked at nf_conntrack proc file during a connection attempt and this is what I see (192.168.3.1 = linux-box, 192.168.3.5 = win-box): # cat /proc/net/nf_conntrack | grep 3389 ipv4 2 tcp 6 118 SYN_SENT src=4.79.142.206 dst=192.168.3.1 sport=43142 dport=3389 packets=6 bytes=264 [UNREPLIED] src=192.168.3.5 dst=4.79.142.206 sport=3389 dport=43142 packets=0 bytes=0 mark=0 secmark=0 zone=0 use=2 2nd update Got tcpdump on the router and it seems that win-box is sending an RST packet: 21:20:24.767792 IP shieldsup.grc.com.45349 > linux-box.myapt.lan.3389: S 19088743:19088743(0) win 8192 <mss 1460> 21:20:24.768038 IP shieldsup.grc.com.45349 > win-box.myapt.lan.3389: S 19088743:19088743(0) win 8192 <mss 1460> 21:20:24.770674 IP win-box.myapt.lan.3389 > shieldsup.grc.com.45349: R 721745706:721745706(0) ack 755785049 win 0 Why would Windows be doing this?

  Read the article

• Windows 8 ignores more specific route

  - by Lander

  OS: Windows 8 I have a cabled NIC (connected to router with ip 192.168.1.0) and a WIFI NIC (connected to a router with ip 192.168.1.1) . I want all traffic to go through the cabled NIC, except the 192.168.1.0/8 range should use the wifi-nic. This was working fine in Windows 7, without any manual configuration. In Windows 8 however, it's not. My routing table: =========================================================================== Interface List 14...f2 7b cb 13 e7 f0 ......Microsoft Wi-Fi Direct Virtual Adapter 13...b8 ac 6f 54 d2 5c ......Realtek PCIe FE Family Controller 12...f0 7b cb 13 e7 f0 ......Dell Wireless 1397 WLAN Mini-Card 1...........................Software Loopback Interface 1 15...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 16...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.198 30 0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.233 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.255.0 On-link 192.168.0.233 276 192.168.0.233 255.255.255.255 On-link 192.168.0.233 276 192.168.0.255 255.255.255.255 On-link 192.168.0.233 276 192.168.1.0 255.255.255.0 192.168.1.1 192.168.1.198 31 192.168.1.198 255.255.255.255 On-link 192.168.1.198 286 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.0.233 276 224.0.0.0 240.0.0.0 On-link 192.168.1.198 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.0.233 276 255.255.255.255 255.255.255.255 On-link 192.168.1.198 286 =========================================================================== Persistent Routes: None I added the rule for 192.168.1.0. I would think Windows should use this rule for the IP 192.168.1.1 because it's more specific than the default-route. However it's not: C:\Windows\system32>tracert 192.168.1.1 Tracing route to 192.168.1.1 over a maximum of 30 hops 1 58 ms 4 ms 4 ms 192.168.0.1 2 68 ms 12 ms 11 ms ^C So... What do I do wrong? And how can I make Windows use the wireless NIC for 192.168.1.0/8

  Read the article

• Looking for a Software to harden Windows machines

  - by MosheH

  I'm a network administrator of a small/medium network. I'm looking for a software (Free or Not) which can harden Windows Computers (XP And Win7) for the propose of hardening standalone desktop computers (not in domain network). Note: The computers are completely isolated (standalone), so i can't use active directory group policy. moreover, there are too many restriction that i need to apply, so it is not particle to set it up manual (one by one). Basically what I’m looking for is a software that can restrict and disable access for specific user accounts on the system. For Example: User john can only open one application and nothing else -- He don’t see no icon on the desktop or start menu, except for one or two applications which i want to allow. He can't Right click on the desktop, the task-bar icons are not shown, there is no folder options, etc... User marry can open a specific application and copy data to one folder on D drive. User Dan, have access to all drives but cannot install software, and so on... So far ,I've found only the following solutions, but they all seems to miss one or more feature: Desktop restriction Software 1. Faronics WINSelect The application seems to answer most of our needs except one feature which is very important to us but seems to be missing from WINSelect, which is "restriction per profile". WINSelect only allow to set up restrictions which are applied system-wide. If I have multiple user accounts on the system and want to apply different restrictions for each user, I cant. Deskman (No Restriction per user)- Same thing, no restriction per profile. Desktop Security Rx - not relevant, No Win7 Support. The only software that I've found which is offering a restriction per profile is " 1st Security Agent ". but its GUI is very complicated and not very intuitive. It's worth to mention that I'm not looking for "Internet Kiosk software" although they share some features with the one I need. All I need is a software (like http://www.faronics.com/standard/winselect/) that is offering a way to restrict Windows user interface. So IF anybody know an Hardening software which allows to set-up user restrictions on Windows systems, It will be a big, big, big help for me! Thanks to you all

  Read the article

• TCP/IP & throughput between FreeNAS (BSD) server & other LAN machines

  - by Tim Dickerson

  I have got a question for someone that knows BSD a bit better than me that are in regards to my LAN setup at home/work here outside Chicago. I can't seem to fully optimize my network's (LAN) thoughput via my FreeNAS (BSD based) file server. It runs with the latest FreeBSD release which is modified to support several protocols for file transfers and more. Every machine that is behind my Smoothwall (Linux based) router is on the usual 192.168.0.x subnet and for most part works just fine. Behind the Smoothwall box, all machines are connected to a GB HP unmanaged switch. I host a large WISP here and have an OC-3 connection here at home/work and have no issues with downloading/uploading from/to the 'net'. My problem is with throughput. When I try and transfer large files...really any for that matter..between any of the machines to/and from the FreeNAS server via FTP, the max throughput I can achieve say between a Win 7 or a Linux box is ~65Mbit/sec. All machines are running Intel Pro 1000 GB NIC's and all cable is CAT6. Each is set to 'auto negotiation' and each shows 1500 MTU Full Duplex @1GB so I know the hardware is okay. I have not adjusted the MTU on any machine as I understand it to be pointless unless certain configurations are used (I assume I am not one of those). My settings for the FreeNAS machine are the following: # FreeNAS /etc/sysctl.conf - pertinent settings shown kern.ipc.maxsockbuf=262144 kern.ipc.nmbclusters=32768 kern.ipc.somaxconn=8192 kern.maxfiles=65536 kern.maxfilesperproc=32768 net.inet.tcp.delayed_ack=0 net.inet.tcp.inflight.enable=0 net.inet.tcp.path_mtu_discovery=0 net.inet.tcp.recvbuf_auto=1 net.inet.tcp.recvbuf_inc=524288 net.inet.tcp.recvbuf_max=16777216 net.inet.tcp.recvspace=65536 net.inet.tcp.rfc1323=1 net.inet.tcp.sendbuf_inc=16384 net.inet.tcp.sendbuf_max=16777216 net.inet.tcp.sendspace=65536 net.inet.udp.recvspace=65536 net.local.stream.recvspace=65536 net.local.stream.sendspace=65536 net.inet.tcp.hostcache.expire=1 From what I can tell, that looks to be a somewhat optimized profile for a typical BSD machine acting as a server for a LAN. I might be wrong and just wanted to find out from someone that knows BSD better than I do if indeed that is ok or if something is out of tune or what. Are there other ways I would find better for P2P file transfers? I honestly do not know what I SHOULD be looking for with respect to throughput between the NAS box and another client when xferring files via FTP, but I am told that what I get on average (40-70MB/sec) is too low for what it could be. I have thought about adding another NIC in the FreeNAS box as well as the Win7 machine and use a X-over cable via a static route, but wanted to check with someone first to see if that might be worth it or not. I don't know if doing that would bypass the HP GB switch and allow for a machine to machine xfer anyways. The FTP client I use is: Filezilla and have tried both active and passive modes with no real gain over each other. The NAS box runs ProFTPD.

  Read the article

• "Hostile" network in the company - please comment on a security setup

  - by TomTom

  I have a little specific problem here that I want (need) to solve in a satisfactory way. My company has multiple (IPv4) networks that are controlled by our router sitting in the middle. Typical smaller shop setup. There is now one additional network that has an IP Range OUTSIDE of our control, connected to the internet with another router OUTSIDE of our control. Call it a project network that is part of another companies network and combined via VPN they set up. This means: They control the router that is used for this network and They can reconfigure things so that they can access the machines in this network. The network is physically split on our end through some VLAN capable switches as it covers three locations. At one end there is the router the other company controls. I Need / want to give the machines used in this network access to my company network. In fact, it may be good to make them part of my active directory domain. The people working on those machines are part of my company. BUT - I need to do so without compromising the security of my company network from outside influence. Any sort of router integration using the externally controlled router is out by this idea So, my idea is this: We accept the IPv4 address space and network topology in this network is not under our control. We seek alternatives to integrate those machines into our company network. The 2 concepts I came up with are: Use some sort of VPN - have the machines log into VPN. Thanks to them using modern windows, this could be transparent DirectAccess. This essentially treats the other IP space not different than any restaurant network a laptop of the company goes in. Alternatively - establish IPv6 routing to this ethernet segment. But - and this is a trick - block all IPv6 packets in the switch before they hit the third party controlled router, so that even IF they turn on IPv6 on that thing (not used now, but they could do it) they would get not a single packet. The switch can nicely do that by pulling all IPv6 traffic coming to that port into a separate VLAN (based on ethernet protocol type). Anyone sees a problem with using he switch to isolate the outer from IPv6? Any security hole? It is sad we have to treat this network as hostile - would be a lot easier - but the support personnel there is of "known dubious quality" and the legal side is clear - we can not fulfill our obligations when we integrate them into our company while they are under a jurisdiction we don't have a say in.

  Read the article

• innobackupex - after restoring - quit without updating PID file

  - by clarkk

  After restoring a backup the server can't start.. restoring # tar -izxf /var/www/bak/db/2013-11-10-1437_mysql.tar.gz -C /var/www/bak/db_import # innobackupex --use-memory=1G --apply-log /var/www/bak/db_import # service mysql stop # mv /var/lib/mysql /var/lib/mysql-old # mkdir /var/lib/mysql # innobackupex --copy-back /var/www/bak/db_import # chown -R mysql:mysql /var/lib/mysql # service mysql start error log 131110 21:24:20 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql 2013-11-10 21:24:21 0 [Warning] TIMESTAMP with implicit DEFAULT value is deprecated. Please use --explicit_defaults_for_timestamp server option (see documentation for more details). 2013-11-10 21:24:21 6194 [Warning] Using pre 5.5 semantics to load error messages from /opt/mysql/server-5.6/share/english/. 2013-11-10 21:24:21 6194 [Warning] If this is not intended, refer to the documentation for valid usage of --lc-messages-dir and --language parameters. 2013-11-10 21:24:21 6194 [Note] Plugin 'FEDERATED' is disabled. /usr/local/mysql/bin/mysqld: Table 'mysql.plugin' doesn't exist 2013-11-10 21:24:21 6194 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 2013-11-10 21:24:21 6194 [Note] InnoDB: The InnoDB memory heap is disabled 2013-11-10 21:24:21 6194 [Note] InnoDB: Mutexes and rw_locks use GCC atomic builtins 2013-11-10 21:24:21 6194 [Note] InnoDB: Compressed tables use zlib 1.2.3 2013-11-10 21:24:21 6194 [Note] InnoDB: Using Linux native AIO 2013-11-10 21:24:21 6194 [Note] InnoDB: Not using CPU crc32 instructions 2013-11-10 21:24:21 6194 [Note] InnoDB: Initializing buffer pool, size = 128.0M 2013-11-10 21:24:21 6194 [Note] InnoDB: Completed initialization of buffer pool 2013-11-10 21:24:21 6194 [Note] InnoDB: Highest supported file format is Barracuda. 2013-11-10 21:24:22 6194 [Note] InnoDB: 128 rollback segment(s) are active. 2013-11-10 21:24:22 6194 [Note] InnoDB: Waiting for purge to start 2013-11-10 21:24:22 6194 [Note] InnoDB: 5.6.12 started; log sequence number 636992658 2013-11-10 21:24:22 6194 [Note] Server hostname (bind-address): '127.0.0.1'; port: 3306 2013-11-10 21:24:22 6194 [Note] - '127.0.0.1' resolves to '127.0.0.1'; 2013-11-10 21:24:22 6194 [Note] Server socket created on IP: '127.0.0.1'. 2013-11-10 21:24:22 6194 [ERROR] Fatal error: Can't open and lock privilege tables: Table 'mysql.user' doesn't exist 131110 21:24:22 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended mysql_upgrade /opt/mysql/server-5.6/bin/mysql_upgrade -u root -pxxxxx -P 3308 Warning: Using a password on the command line interface can be insecure. Looking for 'mysql' as: /opt/mysql/server-5.6/bin/mysql Looking for 'mysqlcheck' as: /opt/mysql/server-5.6/bin/mysqlcheck FATAL ERROR: Upgrade failed

  Read the article

• Centos 5.5 [Read-only file system] issue after rebooting

  - by canu johann

  I have a virtual server under centos 5.5 (hosted by a japanese company called sakura ) Since yesterday, connection through ssh couldn't be established. I've contacted support center who told me to restart VS from the control panel. After restarting, I got the message below Connected to domain wwwxxxxxx.sakura.ne.jp Escape character is ^] [ OK ] Setting hostname localhost.localdomain: [ OK ] Setting up Logical Volume Management: No volume groups found [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda3 / contains a file system with errors, check forced. /: Inodes that were part of a corrupted orphan linked list found. /: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY. (i.e., without -a or -p options) @@cat: /proc/self/attr/current: Invalid argument Welcome to CentOS Starting udev: @[ OK ] Setting hostname localhost.localdomain: [ OK ] Setting up Logical Volume Management: No volume groups found [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda3 / contains a file system with errors, check forced. /: Inodes that were part of a corrupted orphan linked list found. /: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY. (i.e., without -a or -p options) [FAILED] *** An error occurred during the file system check. *** Dropping you to a shell; the system will reboot *** when you leave the shell. *** Warning -- SELinux is active *** Disabling security enforcement for system recovery. *** Run 'setenforce 1' to reenable. /etc/rc.d/rc.sysinit: line 53: /selinux/enforce: Read-only file system Give root password for maintenance (or type Control-D to continue): bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell bash: cannot create temp file for here-document: Read-only file system bash: cannot create temp file for here-document: Read-only file system bash: cannot create temp file for here-document: Read-only file system bash: cannot create temp file for here-document: Read-only file system bash: cannot create temp file for here-document: Read-only file system bash: cannot create temp file for here-document: Read-only file system bash: cannot create temp file for here-document: Read-only file system bash: cannot create temp file for here-document: Read-only file system bash: cannot create temp file for here-document: Read-only file system bash: cannot create temp file for here-document: Read-only file system (Repair filesystem) 1 # setenforce 1 setenforce: SELinux is disabled (Repair filesystem) 2 # echo 1 (Repair filesystem) 4 # /etc/init.d/sshd status openssh-daemon is stopped (Repair filesystem) 5 # /etc/init.d/sshd start Starting sshd: NET: Registered protocol family 10 lo: Disabled Privacy Extensions touch: cannot touch `/var/lock/subsys/sshd': Read-only file system (Repair filesystem) 6 # sudo /etc/init.d/sshd start sudo: sorry, you must have a tty to run sudo (Repair filesystem) 7 # I have 4 site in production and I need to restart the server quickly (SSH + HTTPD ,...). Thank you for your time.

  Read the article

• How can I troubleshoot Virtualbox port forwarding from Windows guest to OSX host not working?

  - by joe larson

  There are a plethora of questions about virtual box port forwarding problems but none with my specific details. I have a Windows install living in Virtual Box, hosted within OSX. I've got several webservers running on localhost on different ports within the Windows install. I cannot for the life of me get port forwarding to work so I can access those webservers from OSX. My settings look like this (yes I have a NAT adapter): And in my vbox configuration file the relavent portion looks like this: <NAT> <DNS pass-domain="true" use-proxy="false" use-host-resolver="false"/> <Alias logging="false" proxy-only="false" use-same-ports="false"/> <Forwarding name="RLPWeb" proto="1" hostport="7084" guestip="127.0.0.1" guestport="7084"/> <Forwarding name="UtilWeb" proto="1" hostport="4040" guestip="127.0.0.1" guestport="4040"/> <Forwarding name="WCARLP" proto="1" hostport="8084" guestip="127.0.0.1" guestport="8084"/> <Forwarding name="WCAUtil" proto="1" hostport="4848" guestip="127.0.0.1" guestport="4848"/> </NAT> I've turned off the Windows firewall to ensure it is not interfering, and I am not running a firewall on OSX. Anyway, when I attempt to go to for example http://127.0.0.1:4040/ on any of my OSX browsers, it will eventually time out. The log file for this VM shows that it is correctly reading the settings and implying it's doing the right thing here: 00:00:08.286 NAT: set redirect TCP host port 4848 => guest port 4848 @ 127.0.0.1 00:00:08.286 NAT: set redirect TCP host port 8084 => guest port 8084 @ 127.0.0.1 00:00:08.286 NAT: set redirect TCP host port 4040 => guest port 4040 @ 127.0.0.1 00:00:08.286 NAT: set redirect TCP host port 7084 => guest port 7084 @ 127.0.0.1 00:00:08.290 Changing the VM state from 'LOADING' to 'SUSPENDED'. 00:00:08.290 Changing the VM state from 'SUSPENDED' to 'RESUMING'. 00:00:08.290 Changing the VM state from 'RESUMING' to 'RUNNING'. 00:00:08.337 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=000000012017d000 w=1834 h=929 bpp=32 cbLine=0x1CA8, flags=0x1 00:00:09.139 AIOMgr: Host limits number of active IO requests to 16. Expect a performance impact. 00:00:13.454 NAT: DHCP offered IP address 10.0.2.15 I've tried setting the Host IP to 127.0.0.1, and I've tried setting Guest IP blank and also 10.0.2.15. None of these seem to help. What else can I look at to troubleshoot this issue? Details of setup: OSX 10.6.8 Windows 7 Professional 64bit VirtualBox 4.1.2

  Read the article

• PC freezing when used to print labels

  - by Will

  Hi I have a windows XP machine that is used to print labels from a Zebra label printer. It is connected a member of the domain. I am getting reports that when people try to use the computer it will sometimes be frozen to the point where they have to physically shut the machine down and boot to get it responding. (this happens about once a day). I took a look in Event Viewer and nabbed some of these errors out of it: Event Type: Error Event Source: Userenv Event Category: None Event ID: 1054 Date: 11/12/2010 Time: 9:13:04 AM User: NT AUTHORITY\SYSTEM Computer: FS-LABELMACHINE Description: Windows cannot obtain the domain controller name for your computer network. (A socket operation was attempted to an unreachable host. ). Group Policy processing aborted. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Event Type: Error Event Source: AutoEnrollment Event Category: None Event ID: 15 Date: 11/11/2010 Time: 11:08:25 PM User: N/A Computer: FS-LABELMACHINE Description: Automatic certificate enrollment for local system failed to contact the active directory (0x80072751). A socket operation was attempted to an unreachable host. Enrollment will not be performed. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Hanging application MSACCESS.EXE, version 11.0.8166.0, hang module hungapp, version 0.0.0.0, hang address 0x00000000. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.... SearchIndexer (2420) Unable to write a shadowed header for file C:\Documents and Settings\All Users\Application Data\Microsoft\Search\Data\Applications\Windows\MSS.chk. Error -1032. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Failed auto update retrieval of third-party root list sequence number from: <http://www.download.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootseq.txt> with error: A connection with the server could not be established For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. I'm not really sure what to make out of this... Thanks for the help in advanced, Will

  Read the article

• Why MySQL sat for 2 minutes doing nothing?

  - by Alex R

  This was a one-time thing, not reproducible... But I saved the show innodb status output. Can anybody tell what's going on here? The simple insert took almost 3 minutes to complete. | InnoDB | | ===================================== 110201 15:58:10 INNODB MONITOR OUTPUT ===================================== Per second averages calculated from the last 34 seconds ---------- SEMAPHORES ---------- OS WAIT ARRAY INFO: reservation count 11963, signal count 11766 --Thread 1824 has waited at .\btr\btr0cur.c line 443 for 118.00 seconds the sema phore: S-lock on RW-latch at 09D6453C created in file .\buf\buf0buf.c line 550 a writer (thread id 1824) has reserved it in mode wait exclusive number of readers 1, waiters flag 1 Last time read locked in file .\buf\buf0flu.c line 599 Last time write locked in file .\btr\btr0cur.c line 443 Mutex spin waits 0, rounds 527817, OS waits 7133 RW-shared spins 2532, OS waits 1226; RW-excl spins 1652, OS waits 1118 ------------ TRANSACTIONS ------------ Trx id counter 0 95830 Purge done for trx's n:o < 0 95814 undo n:o < 0 0 History list length 11 LIST OF TRANSACTIONS FOR EACH SESSION: ---TRANSACTION 0 0, not started, OS thread id 3704 MySQL thread id 551, query id 2702112 localhost 127.0.0.1 root show innodb status ---TRANSACTION 0 95829, not started, OS thread id 3132 MySQL thread id 534, query id 2702020 localhost 127.0.0.1 root ---TRANSACTION 0 95828, not started, OS thread id 3152 MySQL thread id 527, query id 2701973 localhost 127.0.0.1 root ---TRANSACTION 0 95827, ACTIVE 118 sec, OS thread id 1824 inserting, thread decl ared inside InnoDB 500 mysql tables in use 1, locked 1 1 lock struct(s), heap size 320, 0 row lock(s) MySQL thread id 526, query id 2701972 localhost 127.0.0.1 root update INSERT INTO log_searchcriteria (userid,search_criteria,date,search_type) VALUES ( NAME_CONST('userid',NULL), NAME_CONST('search_criteria',_latin1' SELECT SQL_C ALC_FOUND_ROWS idx_search.CTCX_LATITUDE, idx_search.CTCX_LONGITUDE, idx_search.b uilding_id, idx_search.LN_LIST_NUMBER, idx_search.LP_LIST_PRICE, idx_search.HSN_ ADRESS_HOUSE_NUMBER, idx_search.STR_ADDRESS_STREET, idx_search.CP_ADDRESS_COMPAS S_POINT, idx_search.UN_UNIT, idx_search.CIT_CITY, idx_search.ZP_ZIP_CODE, idx_se arch.AR_AREA_NAME, idx_search.BR_BEDROOMS, idx_search.BTH_BATHS, idx_search.ST_S TATUS, idx_search.CTCX_STYLE_TYPE, idx_s -------- FILE I/O -------- I/O thread 0 state: wait Windows aio (insert buffer thread) I/O thread 1 state: wait Windows aio (log thread) I/O thread 2 state: wait Windows aio (read thread) I/O thread 3 state: wait Windows aio (write thread) Pending normal aio reads: 0, aio writes: 1, ibuf aio reads: 0, log i/o's: 0, sync i/o's: 0 Pending flushes (fsync) log: 0; buffer pool: 0 151006 OS file reads, 120758 OS file writes, 6844 OS fsyncs 0.00 reads/s, 0 avg bytes/read, 0.00 writes/s, 0.00 fsyncs/s ------------------------------------- INSERT BUFFER AND ADAPTIVE HASH INDEX ------------------------------------- Ibuf: size 1, free list len 5, seg size 7, 24664 inserts, 24664 merged recs, 4612 merges Hash table size 553253, node heap has 629 buffer(s) 0.00 hash searches/s, 0.00 non-hash searches/s --- LOG --- Log sequence number 5 2318193115 Log flushed up to 5 2318193115 Last checkpoint at 5 2318129891 0 pending log writes, 0 pending chkp writes 3036 log i/o's done, 0.00 log i/o's/second ---------------------- BUFFER POOL AND MEMORY ---------------------- Total memory allocated 213459462; in additional pool allocated 1720192 Dictionary memory allocated 240416 Buffer pool size 8192 Free buffers 0 Database pages 7563 Modified db pages 18 Pending reads 0 Pending writes: LRU 0, flush list 18, single page 0 Pages read 150973, created 28788, written 115137 0.00 reads/s, 0.00 creates/s, 0.00 writes/s No buffer pool page gets since the last printout -------------- ROW OPERATIONS -------------- 1 queries inside InnoDB, 0 queries in queue 1 read views open inside InnoDB Main thread id 2992, state: flushing buffer pool pages Number of rows inserted 794294, updated 89203, deleted 13698, read 1453084305 0.00 inserts/s, 0.00 updates/s, 0.00 deletes/s, 0.00 reads/s ---------------------------- END OF INNODB MONITOR OUTPUT ============================ Thanks

  Read the article

• Best way to handle PHP sessions across Apache vhost wildcard domains

  - by joshholat

  I'm currently running a site that allows users to use custom domains (i.e. so instead of mysite.com/myaccount, they could have myaccount.com). They just change the A record of their domain and we then use a wildcard vhost on Apache to catch the requests from the custom domains. The setup is basically as seen below. The first vhost catches the mysite.com/myaccount requests and the second would be used for myaccount.com. As you can see, they have the exact same path and php cookie_domain. I've noticed some weird behavior surrounding the line below "#The line below me". When active, the custom domains get a new session_id every page load (that isn't the same as the non-custom domain session). However, when I comment that line out, the user keeps the same session_id on each page load, but that session_id is not the same as the one they'd see on a non-custom domain site either despite being completely on the same server. There is a sort of "hack" workaround involving redirecting the user to mysite.com/myaccount, getting the session ID, redirecting back to myaccount.com, and then using that ID on the myaccount.com. But that can get kind of messy (i.e. if the user logs out of mysite.com/myaccount, how does myaccount.com know?). For what it's worth, I'm using a database to manage the sessions (i.e. so there's no issues with being on different servers, etc, but that's irrelevant since we only use one server to handle all requests currently anyways). I'm fairly certain it is related to some sort of CSRF browser protection thing, but shouldn't it be smart enough to know it's on the same server? Note: These are subdomains, they're separate domains entirely (but on the same server). <VirtualHost *:80> DocumentRoot "/opt/local/www/mysite.com" ServerName mysite.local ErrorLog "/opt/local/apache2/logs/mysite.com-error.log" CustomLog "/opt/local/apache2/logs/mysite.com-access.log" common <Directory "/opt/local/www/mysite.com"> AllowOverride All #php_value session.save_path "/opt/local/www/mysite.com/sessions" php_value session.cookie_domain "mysite.local" php_value auto_prepend_file "/opt/local/www/mysite.com/core.php" </Directory> </VirtualHost> #Wildcard (custom domain) vhost <VirtualHost *:80> DocumentRoot "/opt/local/www/mysite.com" ServerName default ServerAlias * ErrorLog "/opt/local/apache2/logs/mysite.com-error.log" CustomLog "/opt/local/apache2/logs/mysite.com-access.log" common <Directory "/opt/local/www/mysite.com"> AllowOverride All #php_value session.save_path "/opt/local/www/mysite.com/sessions" # The line below me php_value session.cookie_domain "mysite.local" php_value auto_prepend_file "/opt/local/www/mysite.com/core.php" </Directory> </VirtualHost>

  Read the article

• Outlook refuses to connect to Exchange

  - by wfaulk

  Outlook 2007 under Windows XP connecting to Exchange 2003 SP2: when started, it flips back and forth between "Connecting to Exchange Server" and "Disconnected" three or four times, then gives up and stays disconnected. I tried deleting the ost file (which was nearly 2GB), turning Cached mode on and off, recreating the account inside the Mail control panel, changing the account to use HTTP, and probably some other things. None of it seemed to make any difference, until … After fiddling with it for a while, I got this absurd error message dialog at startup, and it exits after I click OK: Cannot start Microsoft Office Outlook. Cannot open the Outlook window. The set of folders cannot be opened. Microsoft Exchange is not available. Either there are network problems or the Exchange server is down for maintenance. (I'm not sure if I can even trust that message. It's so long, it just feels like a random offset into Outlook's stack of error messages.) Either way, the Exchange server is available to everyone else, and is available via OWA from that computer. I ran Process Explorer against Outlook and it showed 5 or so ESTABLISHED connections to our Exchange server, plus listening on two UDP ports, and two CLOSE_WAIT connections to localhost. If I managed to look at Outlook's IP connections while it was doing its Connecting/Disconnected dance, it had a huge number of connections open to the Exchange server. It more than filled ProcExp's dialog box; I'm guessing at least 20, probably more. The only other odd thing is that our network admin at some point added a wildcard DNS record to the domain name that we use for email, and now Outlook will sometimes (always?) start by complaining about autodiscover.example.com's SSL certificate. There is a web server there, but it doesn't have any sort of email autodiscover anything on it. It doesn't make any difference if I click "OK" or "Cancel" (or whatever the buttons are). I also added a bogus entry for the hostname to Windows' hosts file, pointing it at 127.0.0.2, and it stopped complaining about the certificate. (The CLOSE_WAIT sockets above were from before I made this change, and went away after.) I don't think this is related, as the same problem should exist for everyone, but it might be. This is the second time this user has had this problem. The first time, I never found a solution other than reinstalling Outlook. Now that it's a pattern, I'd like to find a permanent solution, rather than assume it's a random glitch.

  Read the article

• getUserPrincipal() in JCIFS / Lan-Manager authentitation level setting in Windows 2k8

  - by Chris

  I have to find out in which exact format JCIFS stores the user principal in the "getUserPrincipal()" property. Therefor i created a test Environment like this: Windows Server 2008 Domain Controller Domain named "MYDOMAIN" Many Testusers in Active Directory Tomcat Application Server with my Web Application (which simply reads the user Principal and displays its values). The user should be logged in to the web-application with SSO therefor i need the format that jcifs is using to store the user. (For example user@MYDOMAIN or MYDOMAIN\user...) I tested the Authentication with other SSO frameworks with Kerberos Method and it works as expected. I'm now trying to use SSO through the NTLMHttpFilter of JCIFS. When i try to login i get the following error message: jcifs.smb.SmbException: The parameter is incorrect. jcifs.smb.SmbTransport.checkStatus(SmbTransport.java:541) jcifs.smb.SmbTransport.send(SmbTransport.java:641) jcifs.smb.SmbSession.sessionSetup(SmbSession.java:322) jcifs.smb.SmbSession.send(SmbSession.java:224) jcifs.smb.SmbTree.treeConnect(SmbTree.java:176) jcifs.smb.SmbSession.logon(SmbSession.java:153) jcifs.smb.SmbSession.logon(SmbSession.java:146) jcifs.http.NtlmHttpFilter.negotiate(NtlmHttpFilter.java:189) jcifs.http.NtlmHttpFilter.doFilter(NtlmHttpFilter.java:121) Regarding to the documentation i'm using to configure this, this is a know issue with the Group policy. It is stated there, that i have to change the Group policy "Networkaccess: lan-manager authentication level" to respond to NTLMv1 request. I have done this, but it's still not working. So what i also have to configure is the same policy on the client computer. I have to change the policy, so that the client computer sends NTLMv1. But it is always sending NTLMv2 tokens. The problem now is that i'm somehow not able to change this setting. (I already was before) because the dropdown box to choose the authentication method is "greyed out". edit: just to make this clear, this dialog is on the client-side in the "local-security policies" As you can see from this screenshot, the chosen method is "Only send NTLMv2 responses" which is the wrong setting and i'm pretty sure that this is causing the error above. My question is now, why can't i change this setting? Why is it greyd out?

  Read the article

• ISC DHCP - Force clients to get a new IP address, instead of the being re-issued their previous lease's IP

  - by kce

  We are in the middle of a migration of our DHCP and DNS services from a Debian-based server to a Windows Server 2008 R2 implementation. The Debian server is running isc-dhcpd-V3.1.1. All of workstations are configured to have fixed-addresses between .3 and .40 (the motivation behind that choice is mostly management/political much like here). DHCP leases are given out in the range of .100 to .175. Statically configured servers live in the .200 block and above (which is mostly empty). When we move to the Windows platform, management/political considerations require me to move the IP ranges around again. We would like to keep .1 - .10 reserved for network appliances, switches, and other infrastructure. .200 will remain designated for servers. The addressing space in between should be available to clients and IPs should be dynamically allocated (Edit: instead of automatic as originally mentioned) by the server. My Address Pool on the Windows Server looks like this: 192.168.0.1 192.168.0.254 (Address range for distribution) 192.168.0.1 192.168.0.10 (IP addresses excluded from distribution) 192.168.0.200 192.168.0.254 (IP addresses excluded from distribution) Currently, we have all of our clients still on the .3 - .40 range, and a few machines still active in the .100 - .175 (although there are lots devices that are powered off that still have expired leases with IPs from that range). Since the lease "database" isn't shared between the old and new DHCP server how can I prevent clients from receiving a lease with an IP address that is currently being held by client with a non-expired lease from the old DHCP server? If I just expand the range on the Debian DHCP server to be 192.168.0.10 - 192.168.0.199 is there a way to force clients to not re-use their old IP address when they send their DHCPDISCOVER? Can I make the Windows DHCP server be authoritiative like the ISC implementation? The dhcpd.conf from the Debian server: ddns-update-style none; authoritative; default-lease-time 43200; #12 hours max-lease-time 86400; #24 hours subnet 192.168.0.0 netmask 255.255.255.0 { option routers 192.168.0.1; option subnet-mask 255.255.255.0; option broadcast-address 192.168.0.255; range 192.168.0.100 192.168.0.175; } host workstation-1 { hardware ethernet 00:11:22:33:44:55; fixed-address 192.168.0.3; } ... and so on until 192.168.0.40

  Read the article

• lacp, cicso 3550, 3560, help with configuration

  - by Flamewires

  Hey all this is a repost from a question I asked on the cisco forums but never got a useful reply. Hey I'm trying to convert the FreeBSD servers at work to dual-gig lagg links from regular gigabit links. Our production servers are on a 3560. I have a small test environment on a 3550. I have achieved fail-over, but am having troubles achieving the speed increase. All servers are running gig intel (em) cards. The configs for the servers are: BSDServer: #!/bin/sh #bring up both interfaces ifconfig em0 up media 1000baseTX mediaopt full-duplex ifconfig em1 up media 1000baseTX mediaopt full-duplex #create the lagg interface ifconfig lagg0 create #set lagg0's protocol to lacp, add both cards to the interface, #and assign it em1's ip/netmask ifconfig lagg0 laggproto lacp laggport em0 laggport em1 ***.***.***.*** netmask 255.255.255.0 The switches are configured as follows: #clear out old junk no int Po1 default int range GigabitEthernet 0/15 - 16 # config ports interface range GigabitEthernet 0/15 - 16 description lagg-test switchport duplex full speed 1000 switchport access vlan 192 spanning-tree portfast channel-group 1 mode active channel-protocol lacp **** switchport trunk encapsulation dot1q **** no shutdown exit interface Port-channel 1 description lagginterface switchport access vlan 192 exit port-channel load-balance src-mac end obviously change 1000's to 100's and GigabitEthernet to FastEthernet for the 3550's config, as that switch has 100Mbit speed ports. With this config on the 3550, I get failover and 92Mbits/sec speed on both links, simultaneously, connecting to 2 hosts.(tested with iperf) Success. However this is only with the "switchport trunk encapsulation dot1q" line. First, I do not understand why I need this, I thought it was only for connecting switches. Is there some other setting which this turns on that is actually responsible for the speed increase? Second, This config does not work on the 3560. I get failover, but not the speed increase. Speeds drop from gig/sec to 500Mbit/sec when I make 2 simultaneous connections to the server with or without the encapsulation line. I should mention that both switches are using source-mac load balancing. In my test I am using Iperf. I have the server(lagg box) setup as the server(iperf -s), and the client computers are client(iperf -c server-ip-address), so the source mac(and IP) are different for both connections. Any ideas/corrections/questions would be helpful, as the gig switches are what I actually need the lagg links on. Ask if you need more information.

  Read the article

• Missing startup screens and slow bootup/login after using WinClone to expand Bootcamp partition

  - by user26453

  I used WinClone to backup my Bootcamp partition, which was a Windows 7 Ultimate install, on my late 2006 Macbook Pro. I desired to expand the Bootcamp partition's size. It worked reasonably well with some hiccups along the way and some remaining issues. First issue I ran into was the Bootcamp Assistant utility - it would not recreate the partition. This was due to a lack of contiguous space that is required for the Bootcamp partition. As a result I wiped the whole drive and reinstalled Snow Leopard, did the minimum amount of system updates, and created and formated a new Bootcamp partition. WinClone restored the image without complaint and the image was automatically resized to the new partition's size. Second issue I ran into was after the first boot into Windows. The first thing I noticed was that instead of the newer "slick" startup screen (4 colors wisping around, a Windows 7 title), there was more of an old school style startup screen (a progress bar with block increments, yellow/greenish color, nothing else really). The initial bootup to a login screen was slow, perhaps as Windows dealt with the partition changes. After logging in, the screen goes blank and the computer seems to hang for a minute, before completing the login. After subsequent restarts, the slick screen is still missing, boot to login screen is normal, but the time from login to desktop active is still very slow. As a side note, this behavior of a long time from login to the desktop finally loaded I've previously only seen when the computer would try to hibernate and fail (battery is really bad). On the next startup, I would see this behavior, but not subsequently. So a potential cause: I imaged the partition after hibernating out of Windows. From reading some posts/guides on the subject, this was not recommended, and perhaps shouldn't even have worked? Could the partition be stuck in some weird mode as a result that makes the boot issues appear? I've attempted to disable hibernation and restart, trying to delete the .sys file that hibernation uses. Other fixes I'm thinking of attempting are booting a Win7 disc and repairing the install/partition. I can't shake the nagging feeling something isn't right as a result of the modified boot screens and the slow login process.

  Read the article

• dd-wrt router firmware QoS troubleshooting

  - by Jeff Atwood

  I've been using the dd-wrt firmware on my router and I like it a lot! But -- I'm not sure the quality of service (QoS) is working on it. I have it set up as follows: http, port 80 -- Premium bittorrent, port 6969 -- Bulk https, port 443 -- Premium dns, port 53 -- Premium Per the QoS documentation, these levels are: bandwidth is allocated based on the following percentages of uplink and downlink values for each class: Exempt: 100mbps - ignores global limits. Premium: 75% - 100% Express: 15% - 100% Standard: 10% - 100% Bulk: 1.5% - 100% This doesn't entirely seem to work, though -- with busy torrents going I get major pauses in my web browsing which sucks! The QoS documentation gives some steps to check the QoS ... What you'll be interested to look at will be the first set of source and destination IP, including the port numbers. Next the presence of l7proto and the "mark" field. The entries indicate the current live connection QoS priority applied on them based on the "mark" field. The "mark" values correspond to the following Exempt: 100 Premium: 10 Express: 20 Standard: 30 Bulk: 40 (no QoS matched): 0 You may see "mark=0" for some l7proto service even though they are in configured in the list of QoS rules. This may mean that the layer 7 pattern matching system didn't match a new or changed header for that protocol. Custom service on port matches will usually take care of these. On port 6969 (bittorrent) I see a weird mixture of stuff with mark=0 and mark=40 like so cat /proc/net/ip_conntrack udp 17 105 src=98.162.182.42 dst=1.2.3.4 sport=64512 dport=6969 packets=3 bytes=290 src=10.0.0.2 dst=98.162.182.42 sport=6969 dport=64512 packets=4 bytes=202 [ASSURED] mark=0 secmark=0 use=1 tcp 6 117 TIME_WAIT src=98.248.173.174 dst=1.2.3.4 sport=51114 dport=6969 packets=12 bytes=704 src=10.0.0.2 dst=98.248.173.174 sport=6969 dport=51114 packets=10 bytes=440 [ASSURED] mark=40 secmark=0 use=1 tcp 6 598 ESTABLISHED src=165.132.128.201 dst=1.2.3.4 sport=57218 dport=6969 packets=8024 bytes=9919881 src=10.0.0.2 dst=165.132.128.201 sport=6969 dport=57218 packets=4211 bytes=239607 [ASSURED] mark=0 secmark=0 use=1 tcp 6 586 ESTABLISHED src=68.46.9.24 dst=1.2.3.4 sport=64688 dport=6969 packets=6 bytes=490 src=10.0.0.2 dst=68.46.9.24 sport=6969 dport=64688 packets=8 bytes=944 [ASSURED] mark=40 secmark=0 use=1 udp 17 45 src=222.254.228.38 dst=1.2.3.4 sport=25438 dport=6969 packets=5 bytes=454 src=10.0.0.2 dst=222.254.228.38 sport=6969 dport=25438 packets=3 bytes=154 [ASSURED] mark=0 secmark=0 use=1 ( full file visible at http://pastebin.com/AZE6EtWm ) I've been playing around with this log for a little while and I can't see any patterns! Why is some port 6969 bittorrent traffic tagged mark=0 (not matched) by dd-wrt's QoS while others are tagged mark=40 (Bulk) .. any ideas?

  Read the article

• DELL DRAC & Ubuntu VPN Connection

  - by Mikunos

  I am trying to connect to a DELL DRAC card without success by Ubuntu VPN Connection Manager. I have these data: Protocol: PPTP SERVER IP PPTP: 1233.123.123.123 DRAC IP: 192.168.10.25 Subnet: 255.255.0.0 User: myuser Pass: mypass where have I to write these parameters? I have configured the PPTP connection using the graphical tool in Ubuntu 11.10 ... but in the /var/log/syslog I get these messages: Apr 15 11:33:15 shinet NetworkManager[1035]: <info> Starting VPN service 'pptp'... Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN service 'pptp' started (org.freedesktop.NetworkManager.pptp), PID 18180 Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN service 'pptp' appeared; activating connections Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN plugin state changed: 3 Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN connection 'Connessione VPN 1' (Connect) reply received. Apr 15 11:33:15 shinet pppd[18182]: Plugin /usr/lib/pppd/2.4.5/nm-pptp-pppd-plugin.so loaded. Apr 15 11:33:15 shinet pppd[18182]: pppd 2.4.5 started by root, uid 0 Apr 15 11:33:15 shinet pppd[18182]: Using interface ppp0 Apr 15 11:33:15 shinet pppd[18182]: Connect: ppp0 <--> /dev/pts/1 Apr 15 11:33:15 shinet NetworkManager[1035]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) Apr 15 11:33:15 shinet NetworkManager[1035]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. Apr 15 11:33:15 shinet pptp[18185]: nm-pptp-service-18180 log[main:pptp.c:314]: The synchronous pptp option is NOT activated Apr 15 11:33:46 shinet pppd[18182]: LCP: timeout sending Config-Requests Apr 15 11:33:46 shinet pppd[18182]: Connection terminated. Apr 15 11:33:46 shinet avahi-daemon[1081]: Withdrawing workstation service for ppp0. Apr 15 11:33:46 shinet NetworkManager[1035]: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp0, iface: ppp0) Apr 15 11:33:46 shinet NetworkManager[1035]: <warn> VPN plugin failed: 1 Apr 15 11:33:46 shinet pppd[18182]: Modem hangup Apr 15 11:33:46 shinet NetworkManager[1035]: <warn> VPN plugin failed: 1 Apr 15 11:33:51 shinet pppd[18182]: Exit. Apr 15 11:33:51 shinet NetworkManager[1035]: <warn> VPN plugin failed: 1 Apr 15 11:33:51 shinet NetworkManager[1035]: <info> VPN plugin state changed: 6 Apr 15 11:33:51 shinet NetworkManager[1035]: <info> VPN plugin state change reason: 0 Apr 15 11:33:51 shinet NetworkManager[1035]: <warn> error disconnecting VPN: Could not process the request because no VPN connection was active. Apr 15 11:33:51 shinet NetworkManager[1035]: <info> Policy set 'Wired connection 1' (eth0) as default for IPv4 routing and DNS. Apr 15 11:33:57 shinet NetworkManager[1035]: <info> VPN service 'pptp' disappeared Thanks

  Read the article

• PPTP VPN Not Working - Peer failed CHAP authentication, PTY read or GRE write failed

  - by armani

  Brand-new install of CentOS 6.3. Followed this guide: http://www.members.optushome.com.au/~wskwok/poptop_ads_howto_1.htm And I got PPTPd running [v1.3.4]. I got the VPN to authenticate users against our Active Directory using winbind, smb, etc. All my tests to see if I'm still authenticated to the AD server pass ["kinit -V [email protected]", "smbclient", "wbinfo -t"]. VPN users were able to connect for like . . . an hour. I tried connecting from my Android phone using domain credentials and saw that I got an IP allocated for internal VPN users [which I've since changed the range, but even setting it back to the initial doesn't work]. Ever since then, no matter what settings I try, I pretty much consistently get this in my /var/log/messages [and the VPN client fails]: [root@vpn2 ~]# tail /var/log/messages Aug 31 15:57:22 vpn2 pppd[18386]: pppd 2.4.5 started by root, uid 0 Aug 31 15:57:22 vpn2 pppd[18386]: Using interface ppp0 Aug 31 15:57:22 vpn2 pppd[18386]: Connect: ppp0 <--> /dev/pts/1 Aug 31 15:57:22 vpn2 pptpd[18385]: GRE: Bad checksum from pppd. Aug 31 15:57:24 vpn2 pppd[18386]: Peer armaniadm failed CHAP authentication Aug 31 15:57:24 vpn2 pppd[18386]: Connection terminated. Aug 31 15:57:24 vpn2 pppd[18386]: Exit. Aug 31 15:57:24 vpn2 pptpd[18385]: GRE: read(fd=6,buffer=8059660,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs Aug 31 15:57:24 vpn2 pptpd[18385]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Aug 31 15:57:24 vpn2 pptpd[18385]: CTRL: Client 208.54.86.242 control connection finished Now before you go blaming the firewall [all other forum posts I find seem to go there], this VPN server is on our DMZ network. We're using a Juniper SSG-5 Gateway, and I've assigned a WAN IP to the VPN box itself, zoned into the DMZ zone. Then, I have full "Any IP / Any Protocol" open traffic rules between DMZ<--Untrust Zone, and DMZ<--Trust Zone. I'll limit this later to just the authenticating traffic it needs, but for now I think we can rule out the firewall blocking anything. Here's my /etc/pptpd.conf [omitting comments]: option /etc/ppp/options.pptpd logwtmp localip [EXTERNAL_IP_ADDRESS] remoteip [ANOTHER_EXTERNAL_IP_ADDRESS, AND HAVE TRIED AN ARBITRARY GROUP LIKE 5.5.0.0-100] Here's my /etc/ppp/options.pptpd.conf [omitting comments]: name pptpd refuse-pap refuse-chap refuse-mschap require-mschap-v2 require-mppe-128 ms-dns 192.168.200.42 # This is our internal domain controller ms-wins 192.168.200.42 proxyarp lock nobsdcomp novj novjccomp nologfd auth nodefaultroute plugin winbind.so ntlm_auth-helper "/usr/bin/ntlm_auth --helper-protocol=ntlm-server-1" Any help is GREATLY appreciated. I can give you any more info you need to know, and it's a new test server, so I can perform any tests/reboots required to get it up and going. Thanks a ton.

  Read the article

• How to find out Vim's currently mapped commandos

  - by Boldewyn

  I'm using Vim under Debian, Win Vista and WinXP (the latter two with Cygwin). To handle tabs more easily, I mapped <C-Left> and <C-Right> to :tab(prev|next). This mapping works like a charm on the Debian machine. On the Windows machines, however, pressing <C-Left> deletes 5 lines, as far as I can tell, and meddles with cursor position, while <C-Right> does this, too, and additionally enters Insert mode. Question: To put it in a nutshell, how can I find out, why Vim behaves as it does? Is there a way to backtrace the active commands and keystrokes? Could there be a plugin the culprit? (I didn't install one, perhaps a default include by the Cygwin distro...) If so, how can I find it? Additional Diagnosis: This behaviour occurs regardless of any existing ~/.vimrc file (is therefore not related to my above mentioned mapings) and is not inherited of some /etc/vim/vimrc, since this doesn't exist in the default Cygwin installation. :verbose map doesn't yield any new insights. Either nothing or my mentioned mappings appear, based on the existence of the .vimrc file :help <C-Left> suggests, that the default would be a simple cursor movement, which is apparently not the case. Vim's version under Cygwin: VIM - Vi IMproved 7.2 (2008 Aug 9, compiled Feb 11 2010 17:36:58) Included patches: 1-264 Compiled by http://cygwin.com/ Huge version without GUI. Features included (+) or not (-): +arabic +autocmd -balloon_eval -browse ++builtin_terms +byte_offset +cindent -clientserver -clipboard +cmdline_compl +cmdline_hist +cmdline_info +comments +cryptv +cscope +cursorshape +dialog_con +diff +digraphs -dnd -ebcdic +emacs_tags +eval +ex_extra +extra_search +farsi +file_in_path +find_in_path +float +folding -footer +fork() -gettext -hangul_input +iconv +insert_expand +jumplist +keymap +langmap +libcall +linebreak +lispindent +listcmds +localmap +menu +mksession +modify_fname +mouse -mouseshape +mouse_dec -mouse_gpm -mouse_jsbterm +mouse_netterm -mouse_sysmouse +mouse_xterm +multi_byte +multi_lang -mzscheme -netbeans_intg -osfiletype +path_extra -perl +postscript +printer +profile -python +quickfix +reltime +rightleft -ruby +scrollbind +signs +smartindent -sniff +statusline -sun_workshop +syntax +tag_binary +tag_old_static -tag_any_white -tcl +terminfo +termresponse +textobjects +title -toolbar +user_commands +vertsplit +virtualedit +visual +visualextra +viminfo +vreplace +wildignore +wildmenu +windows +writebackup -X11 -xfontset -xim -xsmp -xterm_clipboard -xterm_save system vimrc file: "$VIM/vimrc" user vimrc file: "$HOME/.vimrc" user exrc file: "$HOME/.exrc" fall-back for $VIM: "/usr/share/vim" Compilation: gcc -c -I. -Iproto -DHAVE_CONFIG_H -g -O2 -D_FORTIFY_SOURCE=1 Linking: gcc -L/usr/local/lib -o vim.exe -lm -lncurses -liconv

  Read the article

< Previous Page | 440 441 442 443 444 445 446 447 448 449 450 451  | Next Page >